Better Quality... Better Price June-July Volvo Polestar Choose Teng Tools NEW MEGA MONSTER TOOL KIT

Transcription

1 Better Quality... Better Price June-July 2014 $8500 TFYT ONLY $7700 After $800 TFYT 1 st Payment Volvo Polestar Choose Teng Tools NEW MEGA MONSTER TOOL KIT TOP ROLL CAB For More Tool KiT Bargains see Pages 2, 3 and 4 19 drawer 1200 PIeCe MeTRIC/AF 53 wide double STACK TOOL KIT Part No. TCMONSTER03 SPARe deep drawer Sockets Std, deep, TX, Hex, Slotted, PH, PZ, Impact Dr Cordless Impact Gun 4 Ratchets, 79 Spanners incl Ratchet combination spanners 49 Screwdrivers 74 piece ratchet screwdriver set, 30 pliers 2 torque wrenches Nut drivers, rivet and riv-nut sets Pry bars & roll/heel bars Puller kit Tap & die set, stud removers Punch & chisel set 1000V pliers & screwdrivers, crimping tool set, oil service kit, files, hammers, hacksaw, shifters & so much more... LID 3/4

2 $3799 TFYT ONLY $2999 After $800 TFYT 1 st Payment AVAILABLE IN BLACK $4199 TFYT ONLY $3399 After $800 TFYT 1 st Payment AVAILABLE IN BLACK 9 drawer 541 PIeCe MeTRIC/AF TOOL KIT 53 wide with work BeNCH TOP Part No. TCM541, & Dr 123 SoCKeTS & accessories Features ratchet combo spanners 11 double ring spanners 34 combo spanners 5/16-1-, 8-32mm 16 ratchet combo spanners 17 pliers 27 screwdrivers, ratcheting screwdriver set 14 T-handle hex keys, oil service kit Pipe cutting & flaring kit 13 pce extension set 9 pce general tool kit dr torque wrench breaker bar dr Impact gun 1/2 dr impact sockets std & deep, impact accessories Deluxe pry bar set, pin punches, files, chisels, impact driver & rivet gun PIeCe MeTRIC/AF TOOL KIT Part No. TCMM1001N 19 Drawer STaCK Std, deep, flex, hex, TX, TPX, TX-e, impact sockets 4 ratchets 35 screwdrivers 74 pce ratchet screwdriver set 24 pliers 2 torque wrenches 69 spanners Nut drivers, rivet and riv-nut sets Pry bars & roll/heel bars Puller kit, Tap & Die set, stud removers Punch & chisel set 1000V pliers & screwdrivers, crimping tool set, oil service kit General tool kit & so much more... TOP ROLL CAB 3/4 NEW MIddLe $45 $55 drive Part No SN drive Part No SN 72 TOOTH FLeXIBLe RATCHeTS 5 0 between each click extra teeth are engaged simultaneously allowing greater force improved reverse switch Fully sealed ratchet head 2 For more products visit us at - tengtools.com.au

3 GeT ORGANISed with TeNG TOOL KITS $2195 TFYT ONLY $1395 After $800 TFYT 1 st Payment $1095 TFYT ONLY $295 After $800 TFYT 1 st Payment AVAILABLE IN RED AVAILABLE IN RED LID 11 drawer 353 PIeCe MeTRIC/AF TOOL KIT Part No. TCMM353BK 5 Drawer FULL DePTH ToP BoX & 6 Drawer roll CaB, & dr ratchets 141 Sockets & accessories 4mm to 32mm & 3/16 to 1-34 Combo spanners 8mm to 32mm & 5/16 to 1-15 Screwdrivers, 8 Pliers, torque wrench, breaker bar ratcheting screwdriver kit, impact driver set Hex keys General tool kit & so much more... $2395 TFYT ONLY $1595 After $800 TFYT 1 st Payment TOP ROLL CAB 288 PIeCe MeTRIC/AF TOOL KIT Part No. TC8288NFXBK 89 Sockets & accessories dr torque wrench breaker bar 13 pce extension set 12 combo spanners 4 pce plier set 74 pce ratcheting screwdriver set 15 pce screwdriver set, 2 shifters Locking plier General tool kit & so much more... 6 drawer 182 PIeCe MeTRIC TOOL KIT Part No. TC8182NF, & Dr 76 SoCKeTS & accessories 12 combo spanners 4 pce plier set 7 pce s/driver set 74 pce ratchet s/driver set General tool kit LID $699 AVAILABLE IN BLACK 13 drawer 464 PIeCe MeTRIC/AF TOOL KIT Part No. TCMM440, & Dr 123 SoCKeTS & accessories 34 combo spanners af/metric 5/16-1-, 8-32mm 17 pliers, 15 screwdrivers 12 mini screwdrivers ratcheting s/driver set 14 T-handle hex key af/metric 13 pce extension set dr torque wrench breaker bar Deluxe pry bar set Pin punches, chisels impact driver & rivet gun General tool kit & so much more... 6 drawer 178 PIeCe MeTRIC TOOL KIT Part No. TC8178NF Features ratchet combo spanners 8 metric ratchet combo spanners 8-19mm 4 pce plier set 7 screwdrivers ratcheting bits driver set 2 shifters, locking plier, utility knife Hacksaw, 2 hammers Tape measure and steel rule. $799 3

4 AVAILABLE IN RED $1699 TFYT ONLY $899 After $800 TFYT 1 st Payment AVAILABLE IN BLACK $1850 TFYT ONLY $1050 After $800 TFYT 1 st Payment Clearly shows if any tools are missing. LID 205 PCe MeTRIC TOOL KIT Part No. TCM8205NFXBK 8 SerieS, 5 Drawer FULL DePTH ToP BoX & 6 Drawer roll CaB 89 SoCKeTS & accessories dr torque wrench breaker bar 13 pce extension set 12 combo spanners 4 pce plier set 74 pce ratcheting screwdriver set 15 pce screwdriver set, 2 shifters Locking plier General tool kit & much more... LID 383 PCe MeTRIC/AF eva TOOL KIT Part No. TCMME383 8 SerieS, 5 Drawer TooL BoX 196 SoCKeTS & accessories 5/16 to 1- & 4mm to 36mm 46 combo spanners 5.5 to 38mm & 5/16 to 1-17 different pliers 25 screwdrivers ratcheting driver & Bits set $130 $189 HeAVy duty 72 T00Th RATCHeT FLIP ReVeRSe ACTION $395 dr 30 PCe SOCKeT SeT Part No. T1230 FrP ratchet reg sockets 10-32mm & -1 Uni joint, 5 extension F x M T-bar adaptor $325 dr 34 PCe MeTRIC SOCKeT SeT Part No. T1234 FrP ratchet Uni joint extension bars adaptor - Spark plug sockets Std 10-27mm & deep 13-24mm hex keys 3/4 dr 22 PCe MeTRIC / AF SOCKeT SeT Part No. T3422S Quick release ratchet 100, 200 & 400mm extensions Sliding T-bar Metric size: 19-50mm af size: 7/8-2, & dr 111 PCe SOCKeT SeT Part No. TM111 regular Sockets: 4-32mm Deep Sockets: 8-17mm S/plug sockets: 16mm & 21mm FrP ratchets, uni joint, T-bar, coupler extension bars: 2, 3, 4, 6, 2- & 10 3 adaptors, 6 spinner handle Bits Hex, TX, PH, PZ, Sloted $ PCe 1000V SeT Part No. TV18N Screwdrivers: 5 blade, 4 PH, 4 PZ Pliers: 8 pliers, 8 combo, 8 long nose, 6 side cutter, 8 heavy duty side cutter, 7 wire stripper 4 For more products visit us at - tengtools.com.au

5 GeT ORGANISed with TeNG TOOL KITS NEW $55 SOCKET SETS WITH 72 TOOTH SWIVEL RATCHETS $75 FREE CAP with ANy T3848 OR T1268 TOOL KIT $275 each HeX dr 24 PCe SeT Part No. T1424S Soft grip FrP flexible ratchet Sockets: 4-13mm Coupler adaptor extension bar, uni joint bits adaptor dr 34 PCe MeTRIC SeT Part No. T3834S Soft grip drive FrP flexible ratchet Sockets 8-19mm Coupler adaptor 2 extensions bars 3 & 6 T-bar adaptor $39 $45 $45 drive dr 20 PCe MINI SeT Part No. T1420 Mini ratchet Sockets: mm Bits, Hex dr: PH1, PH2, PZ1, PZ2, Flat: mm, TX10,TX15, TX20 50mm bit holder, adaptor hex to square HEX DR 23 PCE SET Part No. T1423 Hex dr, fine tooth mini ratchet 4 adjustable wrench 2 extension bar Metric sockets: 4-13mm, Bits: Blade, PH, PZ, TX. HeX dr 24 PCe SeT Part No. T1424 Soft grip FrP ratchet Sockets: 4-13mm extension, uni joint bits adaptor dr 48 PCe TOOL KIT Part No. T3848 FrP dr ratchet Socket & spanner sizes: 8-19mm extension bars Spark plug sockets: 16mm & 21mm Side cutter, combination, long nose, multigrip, locking plier 6 screwdrivers adjustable wrench: 8 $55 $129 dr SOCKeT SeT Part No. T1436 FrP drive ratchet Uni joint, coupler adaptor F:M T-bar adaptor 2 & 4 extension bar reg sockets: 4-13mm Deep sockets: 6-13mm DR 60 PCE METRIC / AF STD & DEEP SOCKET SET Part No. T1460 FRP ratchet, coupler 6 spinner handle 2 & 4 extension bars Uni joint, T-bar Std & deep metric sockets 4-13mm Std AF sockets 3/16-1/2 Deep AF sockets: - Bits sockets flat, TX, PH. drive dr 68 PCe TOOL KIT Part No. T1268 FrP dr ratchet Spanners: 8-19mm Sockets: 10-32mm 6 screwdrivers Side cutter, combination, long nose, water pump extension bars Magnetic bits driver handle $59 12 PCe SCRewdRIVeR SeT Part No. MD912N1 For slotted heads, TX-heads, PH & PZ drive 3 x 1000 Volt insulated screwdrivers blade of tt-mv plus steel dr 40 PCe SOCKeT & SPANNeR SeT Part No. T3840 $109 Square dr Sockets 8 to 22mm Spanners 8 to 19mm Flip reverse ratchet with socket lock 150mm extension, uni joint, adapor & bits assortment 5

6 torque It up WIth our heavy DutY accuracy + or - 4 % torque Wrenches Comes with test certificate FroM $69 TT CERTIFICATE Degree scale for after tightening of cylinder heads Tested to meet or exceed iso standard dr 5-25Nm 4-18Ft/Lb Part No. 3892AG-E1 $69 dr Nm 14-81Ft/Lb Part No. 3892AG-E3 $79 dr Nm Ft/Lb Part No. 1292AG-EP $79 dr Nm Ft/Lb Part No. 1292AG-E4 $155 3/4 dr Nm Ft/Lb Part No. 3492AG-E $225 3/4 dr Nm Ft/Lb Part No. 3492AG-E1 $595 3/4 dr Nm Ft/Lb Part No. 3492AG-E2 $790 & 3/4 DR REVERSIBLE TORQUE WRENChES FroM $95 PUSH THRU drive dr Nm Ft/Lb Part No. 1292AG-ER $95 3/4 dr Nm Ft/Lb Part No. 3492AG-ER $265 SOCKET RAIL SETS $25 $29 $55 $ $35 each dr 8 PCe AF HeX BIT SeT Part No. M3811 Sizes: 3/32 - dr 9 PCe deep MeTRIC SeT Part No. M1407 Sizes 4-13mm dr 7 PCe deep MeTRIC SeT Part No. M3807 Sizes 10-19mm dr 8 PCe deep MeTRIC SeT Part No. M1207 Sizes: 13-24mm Double Hex dr 9 PCe MeTRIC HeX BIT SeT Part No. M1212 Sizes: 5-17mm dr 9 PCe MeTRIC HeX BIT SeT Part No. M3812 Sizes: 3-12mm NEW TORqUe MULTIPLIeR Part No. MP91500 Max tightening torque 1500Nm 1100Ft/Lb Dismantling stubborn bolts & nuts For use with torque wrench & impact sockets Support leg. ratio: 1:10 input drive: output drive: 3/4 $590 RATIO 1:10 COMBINATION SPANNeR SeTS Chrome vanadium combination spanner sets Same dimension at both ends 12 point head is set at 15 0 angle Polished heads satin finish Supplied in a handy tool roll FroM $65 metric 15 Pce: mm Part No. 6515MM $89 12 Pce: 20-32mm Part No. 6512MM $199 7 Pce: 33-50mm Part No. 6507JMM $379 af 9 Pce: -3/4 Part No. 6509AF $65 7 Pce: 13/ Part No. 6507AF $125 7 Pce: 1-5/ /8 Part No. 6507JAF $379 6 For more products visit us at - tengtools.com.au

7 GeT ORGANISed with TeNG TOOL KITS a visit to Torbjörn von Braun and von Braun Sports in Skene, Sweden is undeniably something extraordinary. as well as the fantastic cars in the car showroom you see a workshop that will leave you full of awe. Here reigns a cleanliness and a structure that can usually only be seen amongst Formula 1 teams. Shining workshop floors, height adjustable lifts, laptops and shiny red Teng Tools cabinets add a decent framework to the Ferrari range. Von Braun Sports Cars ab- or in this case remo Special, is a member of the group that is one of Ferraris few approved and authorised Ferraris workshop in Sweden and Norway. as one of these members they have become famous for their precision work and customer focus. To keep up the perfect image in the workshop Von Braun Sports Cars has recently invested in our complete Teng Tools, tool kits. handy socket sets $ $ $ dr 13 PCe SeT Part No. M1413N1 dr FrP ratchet, 2 extn Sizes: 4-13mm dr 12 PCe SeT Part No. M3812N1 dr FrP ratchet, 3 extn Sizes: 8-19mm dr 12 PCe SeT Part No. M1212N1 dr FrP ratchaet, 5 extn Sizes: 8-24mm BOLT CUTTERS Composite carry case CHEAPER THAN A RATCHET hardened cutting edge compound action $35 10 quick ACTION MONGOOSe MULTIGRIP PLIeR Part No. MB481-10Q Serrated jaws with pipe grip Chrome vanadium Push button adjustment 379mm Part No. BC414 $39 485mm Part No. BC418 $49 652mm Part No. BC424 $65 800mm Part No. BC430 $85 958mm Part No. BC436 $105 dr MINI BITS RATCHeT Part No. 1400B reversible 8mm 12 point ring spanner Drop forged Chrome vanadium, satin finish. FroM $39 $ $ dr MINI PALM RATCHeT Part No. 1400M ideal for use where space is very restricted Chrome vanadium, satin finish. each $ PCe MeTRIC OR AF HeX Key SeT Part No. 1479MM Metric Sizes: mm Part No. 1479AF af Sizes: 5/64, 3/32, 1/8, 5/32, 3/16, 7/32,, 5/16, $ PCe TX Key SeT Part No. 1479TX TX8, TX9, TX10, TX15, TX20, TX25, TX27, TX30, TX40. $ wire STRIPPeR Part No. CP55 Hardened SK5 Blade for fast accurate & easy strip awg 0.2-6mm capacity Length Stop 20mm 7

8 41 combo tool box 41 tool chest & roller cabinet $1500 Part No. TMX41COMBO 56 combo tool box 56 tool chest & roller cabinet $1875 Part No. TMX56COMBO LID LID $715 8 drawer TOOL CHeST Part No. TMX41T top box WIth pull out WorK surface $750 8 drawer TOOL CHeST Part No. TMX56T overall dimensions: Length 1405mm, Depth 515mm, combined DraWer LoaD capacity 360Kg $ drawer ROLLeR CABINeT Part No. TMX41R COMBINED DRAWER LOAD CAPACITy 990KG Add TOOLS TO ANy 41 FOR ONLy $950 Part No. 41C PIeCe MeTRIC/AF TOOL KIT RRP $1,900 $ drawer ROLLeR CABINeT Part No. TMX56R overall dimensions: Length 1425mm, Depth 515mm, Height 1040mm (with castors) combined DraWer LoaD capacity 720Kg $595 SLING - IT ChAIN - IT FORK - IT 36 ROAd Part No. TMX36RB Heavy duty UV coating Zinc coated low friction slides Work on the back of any vehicle Overall dimensions: Length 910mm, depth 505mm, Height 665mm combined DraWer LoaD capacity 475Kg 8 For more products visit us at - tengtools.com.au

9 TUFF MATT extreme FEATURES OF THE T.M.X * * Excludes Road Box Stainless steel pull handles on roller cabinets Aluminium profile handles on all drawers Ball bearing slide system Heavy duty castor wheels (6 wheels on 56 & 72 models) Removable door on cabinets (TMX27R) Magnetic hold mechanism on cabinet doors (TMX27R) $ DRAWER 72 STAINLESS STEEL work TOP ROLLeR CABINeT with BUILT-IN CABINeT Part No. TMX72R overall dimensions: Length 1845mm, Depth 610mm, Height 1180mm combined DraWer LoaD capacity 720Kg built-in cabinet WIth removable cabinet Door WIth magnetic hold $ DRAWER 72 STAINLESS STEEL work TOP ROLLeR CABINeT Part No. TMX72RA overall dimensions: Length 1845mm, Depth 610mm, Height 1180mm combined DraWer LoaD capacity 990Kg 9

10 $ COMPUTeR SAFe CIRCUIT TeSTeR Part No.RT1418 Checks on board computer controlled circuits & electrical systems without damage to computer $ IN-LINe SPARK TeSTeR Part No. RT1280 Checks HT systems Set the tester between spark plug & lead, start engine to obtain a quick & simple fault diagnosis. $ PCe wire TeRMINAL TOOL SeT Part No. RT1813 remove flat & round wire from terminal blocks $ PCe AIR CONdITIONING & FUeL LINe disconnect SeT Part No. RT3055 Disconnect the spring lock coupling of Ford & Chrysler air conditioning lines Size:, 5/16,,, 5/8, 3/4, 7/8. $ way BATTeRy TeRMINAL CLeANING TOOL Part No. RT1299 Cleans corrosion from battery posts & clamps one end for clamp reaming one end for positive posts, one end for negative posts. $ $ BLAde FeeLeR GAUGe Part No. RT3100 Steel blades , to in increments 3 brass blades 0.008, 0.010, BLAde ANGLe FeeLeR GAUGe Part No. RT to in increments Marked with thou & mm size on each blade. $ PCe MULTIPURPOSe CONNeCTOR SeT Part No. RT3803 Test leads & components for testing, isolating & evaluating auto electronic circuits Standard Ø4mm banana style plugs Various Male/female connection terminals For use with nearly all vehicles includes: 1.5, 2.0, 3.5, 4.0mm round terminal (f) wire 1.5, 2.0, 3.5, 4.0mm round terminal (m) wire 0.8, 1.2, 2.0, 2.5, 3.0, 5.0, 6.0mm flat terminal (f) wire 0.8, 1.2, 2.0, 2.5, 3.0, 5.0, 6.0mm flat terminal (m) wire 0.8, 1.2, 2.0, 2.5, 3.0, 5.0mm flat terminal (m) wire Led stroboscope, 1 to 2 connector, 27 ta probe (red), probe (black), articular probe (red), articular probe (black), Srs connector, 5k potentiometer (variable resistor), 1 to 1 connect wire (red), 1 to 1 connect wire (black). $ HeAVy duty FILTeR STRAP Part No. RT6686 Sturdy non-slip nylon strap handles spin-type filters up to 6 diameter Use with square drive tool. $75 AIR BAG SeT Part No. RT6928 ideal for roadside technicians to gain entry to vehicles or use with compressed air for popping out dents in doors & other hard to reach panels. 5 PIeCe ReMOVeR SeT Part No. RT5216 Non scratching, removal of all types of trim & door panel clips Made from durable nylon. $ door & window HANdLe TOOL Part No. RT6847 removes small & large door handle & window winder clips. $10 SPOT weld CUTTeR Part No. RT6866 arbor with retractable pilot Use with drill or larger. $ $25 3 LeG OIL wrench Part No. RT6654 For Sizes 60mm-100mm or square drive for removal and installation. 10 For more products visit us at - tengtools.com.au

11 THe RIGHT TOOL, THe RIGHT PRICe $115 BREAKER BARS - ChROME VANADIUM BUy BOTH FOR ONLy $ dr 24 (600mm) Part No. RT1207 $ PCe CALIPeR wind BACK KIT Part No. RT5593 Professional set for rear wheel disc brake callipers Suits BMw, Ford, Haolden, Honda, Mazda, Mercedes Benz, Mitsubishi, Nissan, rover, Toyota, Vw & audi. $18 disc BRAKe PAd SPReAdeRR Part No. RT5557 Makes changing pads easy. Pushes brake piston to install pads on most cars and trucks. $125 $99 $75 3/4 dr 1 MeTRe Part No. RT1135A $ PCe PRy BAR SeT Part No. RT1237 Pry Bar Size: 200mm, 300mm, 450mm and 600mm $45 each VACUUM PUMP & BRAKe BLeedeR KIT Part No. RT5580 Vacuum brake & clutch bleeding. Locate & identify faults in: Fuel, transmission, air conditioning & emissions systems Complete with 3 connector sizes for cars, commercial vehicles / motor cycles range 0-75cm Hg of Vacuum. $49 double FLARING TOOL KIT Part No. RT3957 Double or single flares on bundy, copper, brass, mild steel or aluminium tubing with sizes: 4.75mm, 5mm, 6mm, 8mm, 10mm, 3/16,, 5/16, & o.d. 2 PCe HOSe CLAMP PLIeR SeT Part No. RT9038 Suits brake, fuel lines & heater hoses. $25 2 PCe 15 & 18 AdJUSTABLe wrench SeT Part No. MAXSET2 brush It out... $ $ PCe BRASS BRUSH SeT Part No. RT mm steel handle 1 curved & 1 straight bruch. PARTS CLeANING BRUSH Part No. RT1132 Durable nylon bristles can be used with general cleaning solvents. $4. 90 THReAd FILe PIPe CUTTeR $ Part No. RT3775 Hardened cutting wheel cuts bundy, restores damaged threads on any diameter bolt MeTRIC Part No. RT0302 Size: mm UNF Part No. RT0303 Size: T.P.i 2 PCe STeeL BRUSH SeT Part No. RT mm steel handle 1 curved & 1 straight bruch. copper, brass, aluminium and mild steel tubing 1/8 to 1-1/8 (3-30mm) wide dual roller design, can also do square cuts Tapered burr remover, cleans burrs after cut. 11

12 $75 $59 42 PIeCe MeCHANICS BITS SeT & dr CR-V BIT HOLdeRS Part No. RT1369 TX: 8 Short, 8 Long Sizes: T20-T60 Spline: 5 Short, 5 Long Sizes: M5-M12 Hexagon: 7 Short, 7 Long Sizes: 4-12mm. $ PIeCe 5 POINT TORX BIT SeT Part No. RT9728 Bits: TXP10, TXP15, TXP20, TXP25, TXP27, TXP30, TXP40, TXP45, TXP50 square drive x hex socket adapter & bit holder. $25 4 PIeCe LONG PICK & HOOK SeT Part No. RT0230A 1 x combination, 1 x 90 0, 1 x straight, 1 hook pick, comes with handy wallet $49 13 PIeCe PUNCH & CHISeL SeT Part No. RT Chisels and 6 Punches Quick change release button, double lock design Comes with handy impact resistant blow molded case. $25 RATCHeTING PIPe CUTTeR Part No. RT0080 Heat treated cutting blade for cutting PVC pipe, & water, heater, radiator & fuel hose. TeLeSCOPIC MAGNeT with NeedLeedLe Part No. RT6998 extends from 150mm-670mm $ $ INSPeCTION MIRROR with LIGHT Part No. RT7007 oval mirror with swivel joint holds in all positions Superior visibility with the aid of the light Long flexible shaft allows you to see around corners 2 aa batteries (not included). 100 SINGLe edge RAZOR BLAdeS Part No. RT1248 $ Not to be used for illegal purposes! LOCKOUT TOOL KIT Part No. RT6803 For the purpose of opening many vehicles instruction book enclosed. $ GReASe GUN Part No. RT cc bulk load 450cc cartridge FLeXIBLe HOSe $20 6 PIeCe SCRew extractor SeT Part No. RT1223 Turns out fastener as the extractor is screwed in Sizes: 1/8,, 5/16, 7/16, 9/16 & 3/4 $59 MeTRIC STUd PULLeR SeT Part No. RT1267 extractors remove & install studs by simply putting the socket over the stud and then turning in either direction using a dr ratchet roller cams grip firmly onto the stud without causing damage to threads. $49 wheel NUT SOCKeT SeT Part No. RT7314 with protective sleeve for alloy wheels Sizes: 17, 19, & 21mm $69 11 PIeCe AF CROwS FOOT SPANNeR SeT Part No. RT7433 Dr:, 7/16,, 9/16, 5/8,11/16, 3/4 Dr: 7/8, 13/16, 15/16, 1 12 For more products visit us at - tengtools.com.au

13 THe RIGHT TOOL, THe RIGHT PRICe $45 40 PIeCe MeTRIC MeTRIC ISO & MeTRIC FINe Part No taps 3-12mm & 1/8 NPT 27 1 Tap wrench 3-16mm 1 Die stock (1 /25.4mm od) handle wrench. 110 PIeCe MeTRIC / SAe / UNF / UNC / MeTRIC ISO / MeTRIC FINe / NPT TAPeR & INTeRMedIATe TAPS Part No tap wrench 1/8 - (3mm-12mm) 1-tap wrench 3/16-3/4 (5mm-20mm) 1-die stock (1 od) handle wrench 1-die stock (1 -od) handle wrench 1- T handle tap wrench Metric: 6-18mm - UNC: 3/16-3/4 UNF: 3/16-3/4 - NPT : 1/8 and UNS: -24 TP i and 32 TP i $179 $115 $29 $75 TwIN CAMSHAFT LOCKING KIT Part No. RT9966 Suitable for a range of vehicles Ford, Honda, Land rover, rover, Vw, renault, Citroen, Peugeot, Fiat, Vauxhall / opel. convertible 2 or 3 JaW puller $39 3 JAw PULLeR Part No. RT3854 $69 6 JAw PULLeR Part No. RT3856 $75 4 BeARING SePARATOR Part No. RT3998 Capacity: 75mm-105mm Made from drop forged steel alloy, hardened & chrome plated VALVe SPRING CLAMP Part No. RT Long offset jaws for high performance engines, this tool removes valve springs on most ohv engines without removing the head. $59 PILOT BeARING PULLeR Part No. RT3861 Forged alloy steel jaws can be opened by a tapered cone to hook onto the bearings from 12-38mm i.d. found in crankshafts, flywheels, water pumps, drive shafts, & many other parts. $119 efi TeST LIGHT KIT Part No. RT9894 Fibre optic extension wire Disconnect harness connector from injector, plug test light into connector & start engine. $50 20 PIeCe BUSHING SeT Part No. RT Drivers with nuts Storage case 16 adaptors, mm ( to 1-) $179 $59 COIL SPRING COMPReSSOR Part No. RT4024 Jaws have been designed to wrap over coil For use in limited spaces Jaw opening 230mm BeARING RACe & SeAL driver Part No. RT9139 easier to insert wheel bearing race and seals without damage to race & axle housing 9 Disc Sizes: 44.5mm, 50mm, 59mm, 63mm, 65mm, 72mm, 76mm, 81mm UNIVeRSAL PULLeR SeT Part No. RT4348 Versatile & robust puller can be used as a 2 or 3 legged puller, supplied with short & long legs Pulling diameter: 36.5mm-140mm 13

14 MeASURe IT UP $65 MAGNeTIC STANd with CeNTRAL LOCKING Part No Central locking with one knob for lower, middle and upper joint Fine adjustment. Magnetic base which can be switched on or off V shaped base plate Magnetic force 60 kg Mounting hole diameter 8 mm Maximum height adjustment 330mm buy both For only$100 $45 10MM dial INdICATOR Part No Scale division: 0.01mm Scale graduation: 0-100, Turnable scale & two adjustable tolerance indexes extra pointer that indicates whole millimetres. NEW $225 LASeR distance MeTeR Part No range finder with laser technology Quick & reliable measurements over longer distances Calculate area, volume and height Memory function adjustable reference from the front or rear edges Switchable between metric & imperial measurement Measurement range: m Precision: ± 2mm $ MULTIMeTeR Part No Measuring DC/aC voltage, DC/aC current, resistance, capacity, frequency, temperature also diode test, continuity test, with buzzer, datahold Low battery warning & automatic off Comes with leads, battery & manual $ MM digital depth GAUGe Part No Depth of measurement 200mm reading 0.01mm Stainless steel, Hold function adjustable between mm & inch DiN 862 Battery type Sr44 $99 $115 CLAMP MULTIMeTeR Part No autorange, measures DC/aC Voltage, ac current, resistance Testing diode, continuity with buzzer, datahold, battery capacity warning, with test leads, carrying case, battery & manual. digital BRAKe ROTOR CALIPeR Part No reading 0.01mm Stainless steel, Hold function adjustable between mm & inch Battery type Sr44 Measuring length: 75mm Length of jaws: 92mm TRIPLE READ VERNIER Four function with auto-off Triple read scale mm /128 Yes, it even reads FRACTIONS! metric imperial $220 digital INFRARed THeRMOMeTeR Part No infrared non-contact thermometer for measuring temperature on most kinds of surfaces Temperature range:-18 to +550 Powered by usb port or battery Laser sight with on/off button, switchable between c & f, scanning function for continuous measuring, thread for tripod mounting. $249 digital TACHOMeTeR Part No Measuring distance: mm Photo Measuring: ,000 rpm Contact Measuring: ,000 rpm Metres per minute: Feet per minute: $39 $85 150MM (6 ) Part No $ MM (8 ) Part No Fractions TeLeSCOPIC GAUGe SeT Part No Telescopic gauges, spring loaded with locking screw in shaft range of measurements: 8-150mm 14 For more products visit us at - tengtools.com.au

15 BOLT IT down $279 LIGhT WEIGhT 1.2 KG $299 $159 AIR NIBBLeR Part No Capacity: 1.6mm mild steel Speed: 3,500 per min Minimum radius: 4.5mm air inlet size: NPT dr COMPOSITe MINI IMPACT wrench 475NM 355FT/LBS MAX TORqUe Part No High torque twin hammer mechanism Stepless trigger ergonomic insulated soft grip handle keeps out cold & vibration Lightweight composite housing 360º swivelling air inlet 3 forward torque settings 280/370/475Nm (209/276/355ft/lbs) reversible action Handle exhaust dr COMPOSITe IMPACT wrench 720NM 540FT/LBS MAX TORqUe Part No High torque twin hammer mechanism Stepless trigger ergonomic insulated soft grip handle keeps out cold & vibration 360º swivelling air inlet 3 forward torque settings 490/585/690Nm (366/437/515ft/lbs) reversible action Handle exhaust (>85.8db) with facility to fit an air drain $109 MINI die GRINdeR Part No Speed 25,000rPM Length 160mm For shaft diameter 3 & 6mm plus equipped with rear exhaust and safety lever swivelling air intake. $149 $579 $639 dr AIR RATCHeT Part No Free Speed 240rPM Length: 330mm weight: 1.35kg reversible, swivel air intake insulated ergonomic grip. 3/4 dr IMPACT wrench 1490NM 1100FT/LBS MAX TORqUe Part No High torque action twin hammer Stepless trigger swivelling air inlet Magnesium alloy body 3 forward torque settings: 960/1260/1490Nm (910/930/1100ft/lbs) reversible action Handle exhaust (89.6db) with facility to fit an air drain. 3/4 dr COMPOSITe IMPACT wrench 1215NM 900FT/LBS MAX TORqUe Part No High torque action twin hammer Stepless trigger swivelling air inlet Magnesium alloy body 3 forward torque settings: 405/1010/1215Nm (300/750/900ft/lbs) reversible action Handle exhaust (89.6db) with facility to fit an air drain. $139 dr STUBBy AIR RATCHeT Part No Free Speed 280rPM Length: 165mm reversible, swivel air intake insulated ergonomic grip air DrILL & DrILL bits set speed: 1800rpm DrILL capacity: 10mm Part No Suitable for maintenance & service work ergonomically designed handle 360º Swivel air intake with support handle Supplied in a plastic case with drill set of 24 drills Drill sizes: 1-10mm 1 air lubricator, centre punch and support handle. WITh QUICK ChUCK $195 15

16 NOTHING BUT AIR $99 AIR OPeRATed GReASe GUN Part No. RT500-FC High pressure heavy duty model Supplied awith hydraulic coupling, pipe & flexible hose Capacity: 500g bulk or 400g cartridge air Pressure ratio: 3-7 Bar 6 Bar recommended Pressure ratio: 40:1 air operated pistol style grease gun Continuous grease flow Separate filling nipple & ventilation valve $235 HeAVy duty 20MM BeLT SANdeR Part No. RT-7020D a powerful, HeaVY DUTY belt sander that can be used to sand both flat & curved surfaces Supplied with 2 belts (80 & 100 grit), Double front pulley Belt size 20 x 520mm Length 360mm weight 1.18kgs $279 SPEED 16,000RPM $95 each $469 SeMI AUTOMATIC AIR RIVNUT GUN Part No. RT-102BN Patented design with anti-recoil trigger for reduced fatigue Handy semi automatic atic winder for quick placement of rivnut on gun Suits rivnuts M4, M5, M6, M8, & M10 including stainless steel type Supplied with 5 x mandrels, 2 spanners and hex key. dr 750FT/LB COMPOSITe IMPACT GUN & wheel NUT KIT Part No. RT-W23hK Dr 750Ft/Lb composite impact gun 4 sleeved wheel nut sockets 17, 19, 21 & 22mm Dr 75ml impact extension Heavy duty carry case 3/4 dr deep MeTRIC IMPACT SOCKeT SeT Part No. DL69DMS 8 piece, sizes: 21-41mm 3/4 dr deep AF IMPACT SOCKeT SeT Part No. DL69DAS 8 piece, sizes: 1-1- NITTO STYLE AIR FITTINGS dr deep MeTRIC IMPACT SOCKeT SeT Part No. DL410DMS 10 piece, sizes: 10-24mm dr deep AF IMPACT SOCKeT SeT Part No. DL410DAS 10 piece, sizes: 7/16-1 $199 each $2. 50 $2. 50 $1. 75 $ $9.50 $9. FeMALe AUTOMATIC BARB AUTOMATIC MALe AUTOMATIC FeMALe NIPPLe BARB NIPPLe MALe NIPPLe COUPLeR COUPLeR COUPLeR R420FN R430h R420MN R420FC R430hC R420MC TEng TOOLs AusTRALiA. P.0. BOx 485 north MELBOuRnE getyours@tengtools.com.au PRicEs shown include g.s.t. And ARE REcOMMEndEd OnLy. ThERE is no OBLigATiOn TO comply. not ALL PROducTs in This BROchuRE ARE AvAiLABLE from ALL OuTLETs. All products in this brochure were available at the time of printing. Suppliers will do everything possible, within reason, to maintain stocks of products advertised but cannot be responsible for unforeseen shortfalls beyond their control. e&oe Copyright. Reproduction, whole or in part is prohibited without written approval. Prices valid until July 31 st, Additional freight charges may apply in some areas.