tengtools.com.au PRESSURE LOAD UTILITY KNIFE Part No. 711 Soft grip with push lock safety Automatic blade protrusion, 6 blades.

Transcription

1 9121 TTXTB TCSVPROMO 99 T PIECE METRIC SOCKET SET WITH SPANNERS Part No. T3840 Uni joint, 1/2 F:3/8 M adaptor, 6 extension bars Bits for Flat, Philip, Pozidrive, HEX and TX Combination spanners: 8-19mm Regular sockets: 8-22mm 131 PIECE TOOL KIT AND ROLLER CABINET INCLUDES 76 SOCKETS & ACCESSORIES Part No. TCSVPROMO 1/4, 3/8 & 1/2 Dr 6 Drawer SV tool box 7 Drawer SV Roll Cab 12 combination spanners 8-19mm 4 piece plier set 7 piece screwdriver set Socket sizes: 4-32mm 10 PIECE 1/2 DRIVE METRIC IMPACT SOCKET SET 10-24mm Part No Hip Grip Non Slip 49 8 PIECE METRIC RATCHET COMBINATION SPANNERS Part No. 6508RSMM Chrome vanadium, combined ring/open ended spanners 12 point ring ratchet set at a 15 0 angle Reverse ratchet action Size 8-19mm In handy tool roll PRESSURE LOAD UTILITY KNIFE Part No. 711 Soft grip with push lock safety Automatic blade protrusion, 6 blades RSMM PIECE 1/4 DRIVE SET Part No. T extension bar Bits holder Ratchet Regular sockets: 4-13mm Bits: flat 4-6.5mm PH1, PH2, PZ1, PZ2, TX10, TX15, TX T PIECE T-BAR SPARK PLUG SOCKET SET Part No. TTXTB05 3 extra long long swivel spark plug sockets 14,16 & 21mm & tommy-bar Case suits Teng Tools toolboxes & roller cabinets. 95 tengtools.com.au

2 Teng To Spring TENG S TUF BOX... Tools in the sets have their own individual place so lost tools can easily be identified Recessed handles for comfortable carrying Rubber feet to avoid sliding or scratching paint surfaces Plastic case with improved latch locks Secure hinges with metal pins. 55 T T T T PIECE 1/4 DR TOOL SET Part No. T1420 Fine tooth mini ratchet Sockets: mm Bits, 1/4 hex drive: PH1, PH2, PZ1, PZ2, Flat: 4.5, 5.5, 6.5mm, TX10, TX15, TX20 50mm bit holder, adaptor 1/4 hex to 1/4 square 24 PIECE 1/4 DR TOOL SET Part No. T1424 Soft grip FRP ratchet 4-13mm Extension, uni joint 1/4 bits adaptor 23 PIECE 1/4 DR METRIC TOOL SET Part No. T1423 Fine tooth mini ratchet 4 adjustable wrench, 2 extension bar Metric Sockets: 4-13mm Blade: 4mm, 5.5mm, 6.5mm Phillips: PH1, PH2 Pozi: PZ1, PZ2 Torx: TX10, TX15, TX PIECE 1/4 DR TOOL SET Part No. T1436 FRP 1/4 drive ratchet Uni joint, coupler adaptor 3/8 F:1/4 M T-bar adaptor 2 & 4 Extension bar Reg sockets: 4-13mm Deep sockets: 6-13mm 59 T T T TS PIECE 3/8 DR METRIC SOCKET SET Part No. T3834 FRP 3/8 drive ratchet coupler adaptor 2 extensions 3 & 6 Standard sockets 8-19mm T-bar adaptor 39 PIECE 3/8 DR METRIC SOCKET SET Part No. T3839 FRP 3/8 drive ratchet Universal joint 6 extension bar Coupler adaptor 1/2 F:3/8 m T-bar adaptor Bits: TX10, TX15,TX20, 5mm Hex, 6mm Hex PH, PH2, PZ1, PZ2, 4mm & 5.5mm blade Sockets: 8-22mm Deep: 8-19mm Spark plug sockets: 16 & 21mm. 48 PIECE METRIC/AF TOOL SET Part No. T3848 FRP 3/8 drive ratchet 21 sockets & accessories Socket & spanner sizes: 8 to 19mm (5/16 to 3/4 ) Universal joint Extension bar Spark plug sockets: 16mm & 21mm 6 side cutter, 7 combination, 8 long nose, 10 multigrip, 7 power grip 6 screwdrivers Adjustable wrench: 8 with scale. 3/8 DR METRIC SOCKET SET Part No. TS3816 Stainless steel ratchet Standard sockets 8-19mm 3/8F x 1/2 M adaptor & 2 x 3/8 extension bars 75mm & 125mm 2 FOR MORE INFORMATION VISIT US AT

3 TM11 Into Action With ols 129 T T TS T PIECE 1/2 DR METRIC SOCKET SET Part No. T1221 FRP ratchet Universal joint 2-1/2 & 6 extensions 3/8 F x 1/2 M T-bar adaptor Regular sockets: 10-32mm 30 PIECE 1/2 DR METRIC/AF SOCKET SET Part No. T1230 FRP ratchet Regular sockets 10-32mm & 3/8-1 1/4 Universal joint, 5 extension 3/8 F x 1/2 M T-bar adaptor 68 PIECE 1/2 DRIVE TOOL SET Part No. T1268 Spanners: 8-19mm Regular sockets: 10 to 32mm 6 screwdrivers 6 side cutter, 7 combination, 8 long nose, 10 water pump 1/2 dr ratchet. Uni joint, 3/8 F:1/2 M adaptor, 2 1/2 & 6 extension bars Bits driver handle with magnetic bits holder 1/2 DRIVE METRIC SOCKET SET Part No. TS1218 Stainless steel ratchet Standard sockets 10-24mm, Deep sockets 17,19 & 21mm 1/2 F x 3/8 M adaptor, 1 x 1/2 extension bars 125mm T PIECE 1 DRIVE METRIC SOCKET SET Part No. M1115MM 36mm - 80mm 595 M1115MM 18 PIECE 3/4 DRIVE METRIC SOCKET SET Part No. T Quick release ratchet 200 & 400mm extensions, sliding T-bar Socket size: 19-50mm Supplied in metal case. 299 TM PIECE SERVICE KIT Part No. TM079 Screwdrivers, spanners & pliers Wide jaw adjustable wrench LED torch, gun saw, hammer, tape measure, hex keys Magnetic pick up tool & so much more. 111 PIECE 1/4, 3/8, 1/2 DR SOCKET SET Part No. TM111 Regular Sockets: 4-32mm Deep Sockets: 8-17mm S/plug sockets: 16mm & 21mm FRP ratchets, uni joint, T-bar, coupler Extension bars: 2, 4, 3, 6, 2-1/2 & 10 3 adaptors, 6 spinner handle Bits 1/4 Hex: TX10-TX40, PH1, 2, 3, PZ1, 2, 3, 3-10mm & 1/8-5/16 hex Bits 5/16 Hex: TX45, TX MDV906N 6 PIECE 1000 VOLT SCREWDRIVERS Part No. MDV906N Insulated set with flat and phillips drive, 0.4x2.5x75mm,0.5x3.0x100mm, 0.8x4.0x100mm,1.0x5.5x125mm, PH1-80, PH MD912N 12 PIECE SCREWDRIVER SET Part No. MD912N 6 blade, 4 Phillips, 2 pozi drive Bi material grip with choice of hex & round shanks. tengtools.com.au 3

4 The Sun Work 464 PIECE 1/4, 3/8 & 1/2 DRIVE METRIC/AF TOOL KIT INCLUDES 123 SOCKETS & ACCESSORIES Part No. TCMM Drawer, 8 series tool boxes 34 combination spanners AF/Metric 5/16-1-1/4, 8-32mm 17 pliers, 15 screwdrivers, 12 mini screwdrivers, ratcheting screwdriver set 14 T-handle hex key AF/Metric 13 pce extension set 9 pce general tool kit 1/2 drive torque wrench 1/2 breaker bar Deluxe pry bar set, pin punches, chisels, impact driver & rivet gun General tool kit & so much more... Hip Grip 850 Non Slip 2599 TCMM PIECE METRIC/AF EVA FOAM TOOL KIT INCLUDES 123 SOCKETS & ACCESSORIES Part No. TCMME293 Standard, Deep, Impact, 1/4, 3/8 & 1/2 drive 11 pliers, 32 screwdrivers (standard, impact & VDE-1000 Volt) 42 spanners (combination & ratchet combination) Metric std 4-24mm, metric deep 6-13mm AF std 3/16-1 1/4, AF Deep 3/16-3/4 Impact std & deep 13-24mm 5 files Hacksaw, knife, steel rule, tape measure 2 shifters, 2 cold chisels, pin punches 2 hammers and more. Socket end 1599 TCMME293 Hip Grip Non Slip LONG T-BAR SOCKET SET Part No. TBW10 Extra long sockets 10 piece 8 T-bar set with 8 sockets in size 7-19mm Tommy-bar and a comfortable plastic handle Used in narrow and inaccessible places, the sockets have a length of 300mm and could be used together with a 3/8 ratchet or a T-bar Supplied in a handy textile tool roll 125 TBW10 4 FOR MORE INFORMATION VISIT US AT

5 s Out... Do Some TCMM715N Hip Grip 715 PIECE 1/4, 3/8 & 1/2 DRIVE METRIC/AF TOOL KIT INCLUDES 123 SOCKETS & ACCESSORIES Part No. TCMM715N 19 Drawer, 8 series tool box 3/8 Dr TX TPX & TX-E sockets 1/2 Dr standard & deep sockets 34 combination spanners AF/Metric 5/16-1-1/4, 8-32mm 11 double ring spanners, 16 pliers, 22 screwdrivers 12 mini screwdrivers Ratcheting screwdriver set 14 T-handle Hex, TX / TPX keys 13 piece extension set 1/2 Dr torque wrench Pin punches, chisels Impact driver, rivet gun Nut-sert gun, tap & die set Pin & hook wrenches Puller set, pry bars Stud & nut remover set Oil service kit Hex bits & TX bits 9 Pce general tool kit & so much more... Non Slip 4599 TCMM1001N 1300 Hip Grip Non Slip 1001 PIECE 1/4, 3/8, 1/2, 3/4 SQUARE DRIVE MEGA MASTER TOOL KIT WITH COLOUR CODED METRIC & AF INSERTS Part No. TCMM1001N 1/4, 3/8, 1/2 & 3/4 AF & METRIC 4mm to 50mm (Standard, deep, flex, hex, TX, TPX, TX-E, impact) 19 Drawer, 8 series tool boxes 1/4, 3/8, 1/2 & 3/4 Ratchets 35 screwdrivers 74 piece ratchet screwdriver set 24 pliers 2 torque wrenches 3/8 & 1/2 16 impact sockets 69 spanners Nut drivers, rivet & riv-nut sets, pry bars & roll/heel bars Puller kit, tap & die set, stud removers, punch & chisel set 1000V pliers & screwdrivers, crimping tool set, oil service kit General tool kit & so much more PIECE 1/4, 3/8 & 1/2 DR METRIC & AF KIT INCLUDES 108 SOCKETS & ACCESSORIES Part No. TC8152SV 6 Drawer, 8 series tool box 12 combination spanners 4 piece plier set 7 piece screwdriver set 2 shifters Locki ng plier Utility knife Hacksaw 2 hammers Tape measure Steel rule 569 TC8152SV 170 Hip Grip Non Slip 178 PIECE 1/4, 3/8 & 1/2 DR METRIC KIT INCLUDES 76 SOCKETS & ACCESSORIES Part No. TC8178NF Featuring ratcheting combo spanner set 6 Drawer, 8 series tool box 8 metric ratchet combination spanners 8-19mm 4 piece plier set 7 screwdrivers, ratcheting bits driver set 2 shifters, locking plier, utility knife, hacksaw 2 hammers, tape measure and steel rule. 795 TC8178NF 280 tengtools.com.au 5

6 TC805NFX Teng W In Your 8 SERIES TOOL BOXES! The Teng Tools 8 series range of tool boxes has been developed to meet the high demands of quality conscious professional users all over the world. Teng Tools tool boxes are made from heavy duty 8 gauge steel for longer life and use a 5 step rust prevention and undercoat system All drawers are fitted with a three step ball bearing slide system so drawers fully open smoothly Improved locking system for added security, now with combination locks The construction method used gives a drawer capacity for top boxes and middle boxes of 20 kilos and 25/30/40 kilos for the roller cabinet drawers. EXTRA DEEP 5 DRAWER TOP BOX Part No. TC805NFX Features hydraulic lid 20 kg per drawer capacity Roll cab depth Combination lock DRAWER ROLL CAB Part No. TCW806N Combination lock 25 kg per drawer capacity Ball bearing slides 495 TCW806N 10 DRAWER ROLL CAB Part No. TCW810N Combination lock 25 kg per drawer capacity Ball bearing slides 575 TCW810N FULL ROLL CAB DEPTH 5 METRE TAPE MEASURE Part No. MT MT05 1 PIECE INNER/OUTER DEBURRING TOOL Part No. DBT54 Cutting edges on interior cone allow for fast, clean,inner reaming & outer deburring/bevelling of 10-54mm stainless steel tubing Hardened steel construction. 99 DBT54 INNER/OUTER DEBURRING TOOL Part No. DBT41 Range 3-41mm Deburring copper, aluminium & brass pipes with cutters at both ends for internal & external deburring DBT41 28 PIECE FOLD OUT DRILL BIT SET Part No. DB028 Spiral angle 28 0, split point High speed steel ground from solid Contains: 1.0 x 4, 1.5 x 3, 2.0 x 2, 1 of each 2.5 to 13.0mm. 59 DB COPPER & BRASS PIPE CUTTERS 10MM PIPE DIAM Part No. TFA MM PIPE DIAM Part No. TFA MM PIPE DIAM Part No. TFA MM PIPE DIAM Part No. TFA FOR MORE INFORMATION VISIT US AT

7 ill Put A Spring Step 8.50 ALL TENG TOOLS 1000 VOLT PLIERS & SCREWDRIVER ARE TESTED FOR Insulation properties: resistibility up to 1,000 volts in dry or damp conditions Resistance to cold: how well the tool withstands the cold Durability: that the insulated grips do not become loose Resistance to flame: how well the tool withstands fire Insulation properties under pressure: how well the tool retains it s insulation properties when subjected to pressure BLADE WIDTH LENGTH PRICE PART No. 2.5mm 175mm 8.50 MDV mm 200mm 8.50 MDV mm 210mm 9.90 MDV mm 230mm MDV mm 270mm MDV828 PH0 160mm 8.50 MDV840 PH1 185mm MDV842 PH2 225mm MDV844 PH3 290mm MDV846 PZ0 160mm 9.90 MDV860 PZ1 185mm MDV862 PZ2 185mm MDV864 PZ3 290mm MDV866 9 PIECE METRIC OR AF HEX KEY SET Part No. 1479MM Metric Sizes: mm Part No. 1479AF AF Sizes: 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/ EACH SET TYPE LENGTH PRICE PART No. SIDE CUTTER 150mm MBV441-6 WIRE STRIPER 180mm MBV499-7 SIDE CUTTER 200mm MBV442-8 COMBO PLIER 175mm MBV451-7 COMBO PLIER 200mm MBV451-8 LONG NOSE 200mm MBV TEETH RATCHET FLIP REVERSE LEVER 1/4 DR FRP Part No. 1400FRP 29 3/8 DR FRP Part No. 3800FRP 35 1/2 DR FRP Part No. 1200FRP 45 Quick release function Steel reinforced fibre ratchets that are lighter than conventional ratchets but just as strong. MAGNETIC RACK & WHEEL NUT SOCKET SET Part No. STR04 Durable Nylon rack with powerful magnetic back 3 wheel nut sockets with protective sleeves 17, 19, & 21mm. 99 STR04 MAGNETIC RACK & WHEEL SERVICE SET WITH AIR IMPACT GUN Part No. STR01 Durable Nylon rack with powerful magnetic back 1/2 dr 740Nm air impact wrench 3 wheel nut sockets with protective sleeves 17, 19, and 21mm. 345 STR Reverse action Quick release for added convenience 72 tooth ratchets that are manufactured to full professional quality standards. 3/4 DRIVE 72 TOOTH RATCHET Part No. M DRIVE 72 TOOTH RATCHET Part No. M SWIVEL EXTENSION BARS 3/8 DR 3 Part No. M380020W /8 DR 6 Part No. M380021W /8 DR 10 Part No. M380022W /2 DR 3 Part No. M120020W /2 DR 6 Part No. M120021W /2 DR 10 Part No. M120022W MM PINCER PLIER Part No. MB Chrome molybdenum allow steel, Capacity Steel wire 2,0mm, Iron wire 2,2mm, Copper wire 3,8mm MB BOLT CUTTERS 18 Part No. BC Part No. BC Part No. BC Part No. BC tengtools.com.au 7

8 Warm W From R RT0060 NON-SLIP RUBBER MATTING Part No. RT0060 Trade quality For use in trucks, cars, boats, caravans, around the workshop & home Size: 60x195cm BATTERY FILLER 2 LITRE Part No. RT0098 Fitted with flow control spout. High temperature resistant RT RT1341 SPARK PLUG TERMINAL PLIERS Part No. RT1341 Insulated jaws and handles. COMBINATION EXTRACTOR & DRILL SET Part No. RT1250 #1 to #5 and matching drill bits Left hand extractors with right hand drill bits Sizes: 5/64, 7/64, 5/32, 1/4, 19/64 45 RT COMPUTER SAFE CIRCUIT TESTER Part No. RT1418 Checks on board computer controlled circuits & electrical systems without damge to computer. RT PIECE BOLT EXTRACTOR KIT Part No. RT1384 Cuts into bolts, eliminating wedging or added tightening Sizes: 1/4, 5/16, 3/8, 7/16 & 1/ RT RT0230A 4 PIECE LONG PICK & HOOK SET Part No. RT0230A 1 x combination, 1 x 90 0, 1 x straight, 1 hook pick, comes with handy wallet 9.50 RT1290 BATTERY TERMINAL SPREADER Part No. RT1290 Spread terminals in one operation with the drop forged plier type tool SCREW EXTRACTOR SET Part No. RT1220 Removes broken studs, set screws, pipe & Alemite fittings Features undercut flutes for more positive grip Size: 1/8, 3/16, 15/64, 5/16 & 3/ RT RT HEAVY DUTY CIRCUIT TESTER Part No. RT1320 Power on type tester for 6, 12 & 24 volt systems in AC and DC Durable 4 cellulose acetate handle 120mm stainless steel probe 1500mm tough flexible cord with spring support, strain relief and heavy duty ground clip. RT1320 METRIC STUD PULLER KIT Part No. RT1267 Extractors remove & install studs by simply putting the socket over the stud and then turning in either direction using a 1/2 dr ratchet Roller cams grip firmly onto the stud without causing damage to threads. 8 FOR MORE INFORMATION VISIT US AT

9 eather, Hot Deals ytool 99 RT RT /2 CIRCLIP PLIER SET Part No. RT2899 Replaceable points and spring ratchet locking mechanism to securely hold against circlip tension Contains: Internal & external plier, 2 x 0 0, 2 x 15 0, 2 x 45 0 and 2 x tip size 2 x 0 0, 2 x 15 0, 2 x 45 0 and 2 x tip size RT0160 NOID LIGHT SET Part No. RT0160 The most economical way to check electronic fuel injection (EFI) signals Quickly & easily checks for systems of GM PEI, FORD TBI, GEO TBI, BOSCH PFI, GM TBI & GM SCPI Simply disconnect the fuel injectors, plug the Noid Light into injector wiring harness, then crank the engine. 11 PIECE CALIPER WIND BACK KIT Part No. RT5593 Professional set for rear wheel disc brake callipers Suits BMW, Ford, Holden, Honda, Mazda, Mercedes Benz, Mitsubishi, Nissan, Rover, Toyota, VW & Audi. 29 RT RATCHETING FLAT BAND HOSE CLAMP PLIER Part No. RT3338 Extra wide swivel jaws fits all styles of flat band hose clamps Ratcheting lock mechanism holds the clamp in an open position for easy setting. RT3338 ANGLE TIP INTERNAL SNAP RING PLIER Part No. RT2881 For brake calipers & transmission Snap ring tips are long & angled at 90º Tip size: ø 1.1mm DISC PAD SPREADER Part No. RT5559 Fits in brake calliper to push back pistons for new brake pads installation Use with bar provided 1/2 drive ratchet or 21mm Hex socket. RT MM FORD CLUTCH FAN WRENCH Part No. RT RT HEAVY DUTY LOCK RING PLIER Part No. RT2874 For external locking rings used in trucks & tractors transmissions and other heavy machinery Serrated angled flat tips with retaining screws Spread 3 (75mm) RT RT6780 DOUBLE FLARING TOOL Part No. RT6113 Sizes: 5mm to 16mm, 3/16 to 5/8. 75 RT6113 DOOR & WINDOW HANDLE TOOL Part No. RT6847 Removes small and large door handle & window winder clips RT6847 HEAVY DUTY TUBE BENDER Part No. RT6780 Makes bends on 3/16 (4.75mm), 1/4 (6mm), 5/16 (8mm) & 3/8 (10mm) copper & steel Simply squeeze handles with tubing placed between stud & roller for easy bends 3 PIECE FLARE NUT SPANNER SET METRIC OR AF Part No. RT7302 Metric Sizes: 10-17mm Part No. RT7303 AF Sizes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16 EACH SET 25 tengtools.com.au ONE MAN BRAKE BLEEDER Part No. RT5570 Bleeds brakes without mess Collection bottle with hoses & tapered fittings, convenient magnet positions bottle above bleeder screw RT RT3770 MINI TUBE CUTTER Part No. RT3770 Use in restricted areas cutting wheel cuts 1/8 to 5/8 (3-16mm) O.D. range. 9

10 Clean Barga RT6803 FLEXIBLE HOSE CLAMP PLIER Part No. RT3045 For replacement of fuel, oil & water hose clamps 650mm long 69 RT3045 UNIVERSAL LOCKOUT TOOL KIT Part No. RT6803 For the purpose of opening many vehicles Detailed instruction book enclosed. Not to be used for illegal purposes! 6 PIECE MINI PANEL REMOVAL SET Part No. RT5215 Extra slim profile & unique shape for the delicate task of removing small or fine fascia trim and bezels of; dashboards, air vents, door panels, door locks, electronic seat controls, seat levers, centre consoles, gear shifter, etc. 35 RT AIR RIVETER PISTOL 3/16 Part No. RT Steel 4.8mm (3/16 ) Stainless 4.00mm (5/32 ) Traction power 1045 kgf Stroke 16mm 1/4 Part No. RT Steel 6.4mm (1/4 ) Stainless 4.8 (3/16 ) Traction power 1600 kgf Stroke 14mm 239 RT-W23H 1/2 DRIVE 700Ft/Lb COMPOSITE HOUSING IMPACT WRENCH Part No. RT-W23H Compact twin-hammer mechanism with superior balance & less vibration for efficiency & reduced operator fatigue Stepless trigger Reversible action. 89 RT-R05A-14 1/4 DRIVE 20Ft/Lb STUBBY AIR RATCHET Part No. RT-R05A-14 Compact, lightweight, powerful Speed: 250 RPM Length: 140mm MEDIUM TAIL PIPE EXPANDER Part No. RT6103 Expands from 38mm-64mm Operates with wrench. 39 RT6103 THREAD FILE METRIC Part No. RT0302 Size: mm THREAD FILE IMPERIAL Part No. RT0303 Size: 24, 20, 16, 14, 12, 11, 10 TPI For right & left hand threads, Includes nut chaser EACH SET RT1813 WIRE TERMINAL TOOL SET Part No. RT1813 Remove flat & round wire from terminal blocks Two piece set or individual tools. 10 FOR MORE INFORMATION VISIT US AT

11 RT6632 p With A Rytool in RT PIECE FILTER WRENCH KIT Part No. RT6632 Constructed from 16 gauge steel & coated with electro black oxide finish to prevent corrosion. 1/2 Female to 3/8 Male adaptor allows you to use these filters with either a 3/8 or 1/2 dr tool. 3 LEG FILTER WRENCH Part No. RT6654 For Sizes 60mm to 100mm 1/2 or 3/8 Square dr for removal and installation RT6675 OIL FILTER PLIER Part No. RT6675 Size: 85mm-115mm Removes stubborn filters 25 RT RT6000 STRUT SUPPORT CLAMP Part No. RT0042 Fits vehicles with weak struts on bonnets, tailgates & boots Clamp securely holds weak lift supports in the extended position to allow access to the engine compartment or luggage area. 10 IN 1 TRIM TOOL Part No. RT6000 Performs 10 different jobs Door trim removal to windscreen clip removal. DRAIN PLUG WRENCH Part No. RT6665 Metric sizes: 17, 15, 14, 13, 12, 11, 10 & 14mm RT METRE AIR HOSE REMAINS FLEXIBLE / UV RESISTANT 109 RT-007 DIGITAL TYRE INFLATOR Part No. RT-007 Large LCD screen for easy reading Measuring range PSI (accuracy:+/- 1%) 4 measuring units selectable: PSI - Kpa - Bar - Kgf/cm² Automatic shut-off Air inlet 1/4 female Air flow 1.1CFM at 100PSI Gun body: Zinc alloy & TPR RT MC NITTO STYLE FITTINGS Part No. RT MC RT M 1/4 BSP ENDS Part No. RT M RT RT RT521 SPOT WELD CUTTER Part No. RT6866 1/4 arbor with retractable pilot. GASKET SCRAPER Part No. RT1242 General purpose scraper for residue cleaning etc. 3 PIECE GASKET SCRAPER SET Part No. RT5217 Manufactured from carbon steel hardened, tempered & satin chrome finished with shot blast scraper end. tengtools.com.au 11

12 Great D This S EACH SET ADJUSTABLE HUB NUT WRENCH Part No. RT3889 Adjustable jaws with locking feature to suit both hexagon & octagon wheel bearing lock nuts 3 sets of pins to suit lock nuts with pin holes Servicing bearings on most trucks & buses Hex size: 45mm - 120mm Octagonal size: 45mm - 125mm, Pin Type: 45mm to 125mm. RT3889 LONG SLOTTED & PHILLIPS SCREWDRIVERS 7mm blade, 600mm Length Part No. RT9611 Phillips #2, 600mm Length Part No. RT RYTOOL PULLER SET Part No. RT4001 Multi-purpose puller set for balancer, steering wheel, pulleys, gears, flywheels etc Drop forged 4-slot yoke and variety of cap bolts & forcing screw tips, make this set universal. RT RT-005-A4 SPEED 5,000SPM 150PSI MAX PRESURE 4 AIR BLOW GUN Part No. RT-005-A4 Long angle nozzle Brass thread inlet Sound pressure: db Work pressure: psi 150PSI MAX PRESURE 4 ADJUSTABLE TIP BLOW GUN Part No. RT-009-A4 With 4 length adjustable nozzle Work pressure: psi Sound pressure: db RT-009-A4 109 AIR SAW Part No. RT-1003 Capacity: mm Stroke: 10mm Length: 235mm Weight: 850g Applications in straight or curved cutting on panels, pipes, shaped steel and auto body, etc. RT-1003 CV BOOT CLAMP Part No. RT6826 Works on CV joint with band-type boot clamps RT6826 MAGNETIC PICK-UP TOOL 2.2KG CAPACITY Part No. RT7004 Extends from 125mm to 635mm RT PIECE METRIC STUBBY SPANNER SET Part No. RT7298 Sizes: 10mm-19mm. 59 RT PIECE AF STUBBY SPANNER SET Part No. RT7296 Sizes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 RT FOR MORE INFORMATION VISIT US AT

13 RT7461 eals On Rytool pring 85 RT6943 CHAIN BREAKING AND RIVET KIT Part No. RT6943 Breaks chains from numbers 35 to TWIN & TRIPLE ARM PULLER SET Part No. RT x yoke twin arm, 1 x yoke triple arm, 3 x long type pulling arm with hooks, 1 x spindle Forged yokes & arms with extra thin hooks suitable for removal of parts from limited access areas Can be reversed for both inner and outer pulling jobs. RT PIECE BITS SET Part No. RT Ribe Bits: M4-M14 6 Hex Bits: 4-12mm 6 Spline Bits: M4- M12 12 Torx Bits: TX10- TX70 1/2 Drive x 10mm hex bit holder 3/8 Drive x 10mm hex bit holder 1 x 10mm 90mm long bit holder 95 RT500-FC 1/4 DIE GRINDER KIT Part No. RT-303AK1 One-piece spindle support & motor housing for added strength and abrasion resistance Double row arbor bearings provide smoother operation and longer tool life Ideal for rapid metal removal or precise finishing, such as weld cleaning, die contouring, shaping and smoothing, casting and forging clean up and deburring Integral rear exhaust. 79 RT-303AK1 DUAL CHUCK TYRE INFLATOR Part No. RT-150 Heavy duty die cast Spiral protected air hose Deflator button Dual hold on chuck Dual calibrated PSI, KPA Magnified sight glass Impact absorbing bumpers. 99 RT-150 AIR OPERATED GREASE GUN Part No. RT500-FC High pressure heavy duty model Supplied with hydraulic coupling, pipe & flexible hose Capacity: 500g bulk or 400g cartridge Air Pressure Ratio: 3-7 Bar 6 Bar recommended Pressure Ratio: 40:1 Air operated pistol style grease gun Continuous grease flow Separate filling nipple & ventilation valve Light weight aluminium body. 3/8 DRIVE METRIC CROWS FOOT WRENCH SET Part No. RT piece Sizes: 10-19mm 49 RT PIECE BEARING TOOL KIT Part No. RT8980 Convenient way to contact closely & smoothly with the upper inner edge of a bearing so that hammering force can be applied evenly to enable the bearing to be smoothly & quickly assembled & positioned in the insert hole of an axle 9 sizes: (39.5mm), (44.5mm), (50.0mm),2.322 (59.0mm), 2.48 (63.0mm), (65.0mm), (72.0mm), (76.0mm), (81.0mm). 79 RT8980 tengtools.com.au 13

14 Blow Cobw 20 PIECE AIR CHISEL SET Part No Suitable for both circular and hexagonal chisel drive 360º Swivel hose connection Blows: per min Stroke length: 67mm, total length: 212mm Chisel set consists of: 1chisel hammer, 15 chisels, 1 quick chuck, 1 chisel holder spring and 1 air lubricator ENGRAVING PEN Part No Tungsten carbide tip Steel housing with knurled grip and On/Off control For professional and industrial engraving, cleaning, chipping etc For use on hard metal to soft plastic. 10mm STRAIGHT DRILL Part No Speed 18,000RPM Spindle thread: 3/8x24 UNF With quick chuck for quick shifting between different drill diameters PIECE MEASURING KIT Part No Stainless steel rule 300mm, digital caliper, micrometer 6 Telescopic gauges, precision square Protractor, screw pitch gauge 13 Blade feeler gauge, TC tipped scriber. Insert into standard tool box drawer 20 PIECE MEASURING SET Part No mm (6 ) digital caliper mm/inch 120mm protractor 0-25mm micrometer mm/inch 150x100mm precision square 300mm steel rule 150mm TC-tipped scriber 280mm dial indicator 200mm divider with locking. PARALLEL BLOCKS Part No Size: 160x8x22 Parallelism tolerance mm, hight tolerance +0.01mm MAGNETIC BASE Part No Magnetic force: 80 kg Max height: 250mm Hole: 6mm & 8mm with fine adjustment On & Off Switch on magnetic base 3/8 DRIVE STUBBY AIR RATCHET Part No Free Speed 280RPM Length: 165mm Reversible swivel air intake Insulated ergonomic grip Ideal for work in confined areas /2 DRIVE AIR RATCHET Part No Free Speed 240RPM Length: 330mm Weight: 1.35kg Reversible swivel air intake Insulated ergonomic grip FOR MORE INFORMATION VISIT US AT

15 Out The Winter ebs! /2 DRIVE COMPOSITE MINI IMPACT WRENCH 475NM 355FT/LBS MAX TORQUE Part No High torque twin hammer mechanism Stepless trigger Ergonomic insulated soft grip handle keeps out cold & vibration Lightweight composite housing 360º swivelling air inlet 3 forward torque settings 280/370/475Nm (209/276/355ft/lbs) Reversible action Handle exhaust 3/4 DRIVE IMPACT WRENCH 1560NM 1165FT/LBS MAX TORQUE Part No High torque action twin hammer Stepless trigger Ergonomic insulated soft grip handle keeps out cold & vibration 360º swivelling air inlet Magnesium alloy body 3 forward torque settings: 1080/1390/1560Nm (805/1040/1165ftlbs) Reversible action Handle exhaust (89.6db) with facility to fit an air drain. 400 ENGINEERS SURFACE PLATE 200 x 300 Part No x 600 Part No , x 800 Part No ,475 With stand, adjustment screws & vibration absorber DIGITAL DIAL GAUGE Part No Automatic off Tolerance function 3 V battery CR 2032 Zero setting in any position Adjustable between mm & inch Absolute incremental reading DIGITAL THICKNESS GAUGE 15MM Part No Adjustable between mm & inch Automatic shut off Reset button Battery type SR44. CLAMP MULTIMETER Part No Autorange, measures DC/AC Voltage, AC current, resistance Testing diode, continuity with buzzer, datahold, battery capacity warning, with test leads, carrying case, battery & manual UNIVERSAL MICROMETER Part No Reading 0.01 mm Forged clamp and frosted Chrome plated scale 7 different measuring tips Flat 6.5mm, Flat 12mm, Flat 2 x 4mm, Spherical 6.5mm, Conical 600 Blade 6.5 x 8, 0 x 3.5mm Friction socket & locking tips Supplied in a wooden box with exchangeable measuring tips. DEPTH GAUGE STOP Part No Attaches to base of vernier caliper (vernier not included) measuring size range 0-25mm 10mm BELT SANDER Part No Sanding belt: 10x330mm Speed: 18,000 RPM 360º swivelling air inlet SPEED 20,000RPM 329 tengtools.com.au 20mm BELT SANDER Part No Sanding belt: 20x520mm Free speed: 16,000 RPM 360º swivelling air inlet CUT OFF TOOL Part No Safety trigger with swivelling air inlet Equipped with disc guard

16 IN 1 PULLER SET Part No. TT Reversible legs, span width 130mm, spindle opening 17mm, clamping depth 100mm 4 PCE RATCHET CRIMPING SET Part No. TTCP exchangeable heads for insulated and non insulated terminals and a 2.5mm hex key 121 PCE CRIMPING SET Part No. TTCP Slots for crimping red, blue & yellow terminals & cutters for bolts and wire. 120 terminals. 12 PCE NEEDLE FILE SET Part No. TTNF Flat, halfround, 3 square, round, warding, knife, barette, hand, oval, spring & double half round shape 4 PCE SCRAPER SET Part No. TTSR Scraper remover set including a gasket scraper, two hooks and a piercer. 7 PCE SPECIALIST SOCKET SET Part No. TTSS Oxygen sensor, injector, vaccum switch, oil sender socket, heat oxygen & offset oxygen sensor wrench. 10 PCE DOUBLE FLARING SET Part No. TTTF Flaring tool & pipe cutter kit, pipe cutter capacity 3-32mm,flange adaptors for pipe diameters 4-14mm 8 PCE PICK UP TOOL SET Part No. TTTM Magnifying glass, inspection mirror, claw pick up & LED flash light and batteries 8 PCE TORQUE STICK SET Part No. TTTS /2 torsion bars 90, 110, 120, 140Nm, 1/2 wheel nut sockets 17, 19 & 21mm, impact adaptor drive 3/8 x 1/2 15 PCE LONG TX & HEX BIT SET Part No. TTTXH mm long bits sockets, 9 for internal TX heads & 6 for hex type bits 5-12mm. Satin finish. 15 PCE 3/8 & 1/2 DR IMPACT SET Part No. TT9015HX Hex impact socket bits 3/8 drive sockets 4-12mm, 1/2 drive sockets 5-19mm 7 PCE 1/2 DR IMPACT SET Part No. TT extension bars 75, 125, 250mm, universal joint, 2 adaptor drives 1/2-3/8 7 PCE AF T-HANDLE HEX SET Part No. TTHEX7AF Size: 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16 HAND RIVET SET Part No. TTHR mm long rivet gun with 4 nose bushes 2.4, 3.2, 4.0, 4.8, and 80 assorted rivets 5 PCE CUTTING SET Part No. TTDCT tin snips straight/right and straight/left, universal knife, electrician s scissors and cable pliers. 34 PCE RATCHETING TAP & DIE SET Part No. TTDTD Taps 3-12m, dies 3x0.5-12x1.75, drill bits mm, screw extractors 1/8-3/8 GET ORGANISED... GET TENG... GET TO: Teng TOOLs AusTrALiA. p.0. box 485 north melbourne getyours@tengtools.com.au prices shown include g.s.t. And Are recommended OnLy. There is no ObLigATiOn TO comply. not ALL products in This brochure Are AvAiLAbLe from ALL OuTLeTs. All products in this brochure were available at the time of printing. Suppliers will do everything possible, within reason, to maintain stocks of products advertised but cannot be responsible for unforeseen shortfalls beyond their control. E&OE Copyright. Reproduction, whole or in part is prohibited without written approval. Prices valid until November 30th, Additional freight charges may apply in some areas.