P/V II-12 Air Insulated Switchgear

Transcription

1 GE Industrial Solutions P/V II-12 Air Insulated Switchgear Leading the future of electrification

2 GE GE is a diversified organization covering a myriad of market segments, including infrastructure, finance and media. From energy, water, transportation and health to access to money and information, GE serves customers in more than 100 countries and employs more than 300,000 people worldwide. The company traces its beginnings from Thomas A. Edison, who established the Edison Electric Light Company in In 1892, a merger of Edison General Electric Company and Thomson-Houston Electric Company created the General Electric Company. GE is the only company listed in the Dow Jones Industrial Index today that was also included in the original index in Industrial Solutions GE Industrial Solutions, a division of GE Energy Management, is a global leading provider in power distribution, offering a wide range of services and products which include medium and low voltage power distribution equipment and components, motor & control systems and service products that are safe, reliable and offer high performance. Honour 2010 World's Most Innovative Companies 2011 World s Most Admired Companies 2009 World s Most Respected Companies 2011 Best Global Brand 2008 World s Most Respected Companies 2007 World s Best R&D Companies

3 90 More Than 90 Years of Interrupter Experience GE pioneered experimental vacuum interrupters in the 1920s. Refined it and introduced the world's first 15kV Vacuum circuit breaker in the 1960s. To date, this interrupter design has been the world leader in vacuum technology and has accumulated over 55 years of reliable field service. A Universal Applications SecoGear is designed, assembled and tested to meet or exceed applicable IEC, GB and DL standards. It is suitable for applications in all major industries including T&D, Oil & Gas, Automotive, Processing plants, Iron and Steel mills, Mining, Commercial buildings, etc. It provides protection for all types of applications: coble, overhead lines, motors, capacitors, transformers, busbar sections, etc. World Class Quality Manufactured, assembled and tested all in the same sophisticated facility, SecoVac is the product of state of the art manufacturing processes assured by ISO 9001:2008 and ISO certification. eco Environment Consciousness Selecting low environmental impact technologies has become increasingly important to engineers tasked with choosing equipment for an application. W ith commitment to environment protection, the solid insulation of epoxy resin is used for SecoVac series MV embedded pole vacuum circuit breaker instead of SF 6 gas.

4 SecoGear P/V II-12 Air Insulated switchgear SecoGear P/V II-12 indoor A.C. metal-clad withdrawable switchgear is latest indoor electric distribution equipment produced by GE industrial system. The switchgear applies to three-phase A.C. indoor distribution single busbar or single busbar sectionalizing system, with rated voltage of kV, rated current of 4000A and lower, and rated frequency of 50Hz, for control, protect and inspect the circuits of power system. The rails middle-assembed structure is adopted in the switchgear. The frame structure is made of folded high quality steel plates bolted together. With perfect interlocks, the switchgear has psssed tests of the internal fault arc, condensation, and harsh environment. Being equipped with VB2 type high performance vacuum breaker developed by GE with its advanced technology, safety and reliability are fully guaranteed. If request, fixed type load switch can be installed in the switchgear. Applicable standards GB kV AC metal-enclosed switchgear and Controlgear GB/T11022 Common specifications for high-voltage switchgear and controlgear standards DL/T404 Indoor AC high-voltage switchgear panel IEC AC metal-enclosed switchgear and controlgear for rated voltages above 1 kv and up to and including 52 kv Environmenal data Max ambient temperature +40 Min ambient temperature -15 Mean ambient temperature within 24h no more than 35 Maximum average relative humidity: Over 24 hour period 95% Over 1 month period 90% Saturated steam pressure: Daily average: <2.2kPa Monthly average: <1.8kPa Altitude category does not exceed 1000m Earthquake intensity no more than 8 degree Site free from fire/explosion, severe contamination, corrosion and violent shock and ambient air is not polluted obviously by dust Weatherproof in accordance with the specification in level 1 in GB3906. Note: when the relative humidity is above 70%, the heater shall be put into use for preventing condensation. When the normal service condition is different from the above mentioned, please confer with us. 1

5 Structure The switchgear consists of two parts: cubicle and withdrawable parts. The cubicle are made of high quality steel plate (zinc plate coated with aluminum can also be used at the customers' request). The degree of protection for the enclosure is IP4X and IP2X (when the door of the circuit breaker compartment is open). The switchgear can be equipped with VB2 type withdrawable vacuum circuit breaker truck or fixed type load switch. The rails of truck are assembled on the middle side of the cubicle to avoid fault that the disconnecting contacts of the truck can not engaged with the contacts fixed in the cubicle caused by the floor out of shape. At the same time, the height of the power cable terminal can be rised and the convenience for operation and maintenance improve. The switchgears can be arranged face to face but can not be installed against wall. Height (a) mm 2200 Rated breaking current 31.5A Rated current of branched busbar 1250A mm Construction of P/V Ⅱ-12 for cable incoming and feeder Width (b) Depth of the frame Depth of the rear cover plate(d) Rated breaking current:40ka Rated current of branched busbar 1250A Rated breaking current:40ka Rated current of branched busbar>1250a mm 840 mm 1000 mm * mm 30 *Only for the structure 650mm in width ; Once there is a switchgear with 650mm in width, the depth of the other cubicles will change accordingly. When cables come in switchgear from the top, then should add rear channel cabinet with 200mm depth. When the busbars come in from the top, should add rear channel cabinet with 350mm. A. Busbar compartment B. Truck compartment C. Cable compartment D. LV compartment 1. Pressure relief flap 2. Enclosure 3. Removable partition 4. Branch busbar 5. Main busbar 6. Fixed contact 7. Bushing spout 8. Current transformer 9. Earthing switch 10. Cable sealing terminal box 11. Arrestor 12. Bottom plate 13. Secondary terminal box 14. Removable partiton 15. Secondary terminal panel 16. Shutter 17. Secondary plug 18. Vacuum circuit breaker 19. Earthing for moving truck 20. Racking mechanism 21. Earthing switch operation mechanism 22. Control cable duct 23. Main earthing busbar 2

6 The enclosure and partition The enclosure of the switchgear is made of folded high quality steel plates connected with fasteners. The assembled switchgear has integrity in dimension. The cubicle is divided into truck compartment, busbar compartment, cable compartment and LV compartment by metal partitions. Each function unit is separated from others. Truck compartment The truck compartment is on the middle front of the cubicle. Mount specified truck rail on both sides of the compartment for the truck to move along between the test and servicing positions. On the rear cover of the compartment, there is bushing type CT or bushing spouts and protective metal shutters, which can be moved up and down. The shutters can open automatically during truck moving to servicing position from test position; the movable contacts will be inserted into the fixed contacts. When the truck moves into test position, the protective shutters will go down to cover the fixed contacts to make it isolated. This can protect personnel from touching the live parts. The operation of the truck shall be carried out with the door of the cubicle closed. The position of the truck can be viewed through the window on the door. In the meantime, the close/ open button on the breaker panel and position indicator, indicator for spring charging also can be viewed. Withdrawable Parts Based on the purposes, the withdrawable parts can be classified as circuit breaker truck, PT truck, link truck, metering truck and etc. The same truck can be interchangeable easily. The primary arms installed on each phase are all equipped with spring fingers. Trucks can be in test and servicing positions, each of which has a locating device to ensure the trucks is allowed being operated only when they are at the proper positions. Before the truck is moved, the breaker should be in open. Busbar compartment The upper rear of the cubicle is main busbar compartment. Main busbars can be led from one cubicle to another. The bushings installed on the partition not only support the main busbar but also prevent the faulty spreading to the adjacent cubicle. Branched busbar can be connected to the main busbar and bushing spout with bolts. All busbars can be covered with heat-shinkable tubings according to customer' s special requirements. The busbar joints can also be covered with insulation boot. 3

7 Cable compartment The lower rear of the cubicle is cable compartment, in which current transformer, earthing switch and arresters can be installed. With the rear cover plate removed, the operator can enter the cubicle to install cables. 1 or 3 cables can be connected to the terminal in parallel at the same time. The Height of the cable terminals can reach 680mm. In the bottom of the compartment there is removable steel plate as well as cable clips and seal rings with variable radius. In addition, heaters are set in both truck compartment and cable compartment to prevent condensation caused by high ambient humidity. LV compartment LV compartment is on the upper front of the cubicle. The secondary instruments such as the metering instruments, operating switch, buttons and relays, etc, can be installed. There are some little holes on the side plate of the compartment for wirings. Pressure-relief All the truck compartments, busbar compartment and cable compartment have pressure relief duct. In the case that internal arc fault occurs to the truck, busbar or cable compartments, the pressure inside the compartment rise. The pressure-relief plate will be opened automatically to release pressure and gas. At this time because the seal ring installed on the door is enclosed, the safety of the operators in front of the panel is guaranteed. Earthing Device There are fixed earthing contacts on both sides of the truck compartement, and there are moveable earthing contacts installed on both sides of the truck to ensure that the truck be earthed reliably from the test position to servicing positon. The earthing resistance is less than 300 μω. After the cubicle is arranged properly, earthing busbar of cubicles be connected and be connected to the earth. Interlocks Perfect and reliable interlocks facilities are incorporated to ensure safe operation. These include the following: a. Only when earthing switch is in Open (at this time the rear cover can t be open), can the truck be racked in from test position to servicing position. b. Only when the breaker is in open, can the truck be racked between the test position and servicing position in cubicle. c. When the earthing switch is closed (at this time the rear cover can be open), the truck can t be racked in from the test position to serving position. d. When the rear cover is open, the earthing switch can t be open. e. The earthing switch can be closed, only when the breaker truck is on test position or outside the cubicle. f. When the truck is on servicing position, the secondary plug will be locked and can t be removed. g. Only when the breaker truck is on test position or servicing positon, can the breaker carries out opening and closing operation. h. All the doors of HV compartments are equipped with locks and be opened or closed with special tools. Note: It is allowed to use capacitive voltage detection system. 4

8 Technical data for switchgear Rated insulation level Description Unit Data Rated voltage kv min Power frequency withstand voltage kv 42 Lightning impulse voltage (peak) kv 75 Rated frequency Hz 50 Rated current of main busbar A Rated current of branch busbar A (forcing cooling) Short-time withstand current (4s) ka Rated peak withstand current ka (125) Degree of protection Enclosure IP4X, IP2X (if the truck compartment door is open) Technical data for VB2 circuit breakers Rated insulation level Description Unit Data Rated voltage kv min Power frequency withstand voltage kv 42 Lightning impulse voltage (peak) kv 75 Rated frequency Hz 50 Rated current A (forcing cooling in panel) Short-time withstand current (4s) ka Rated peak withstand current (peak value) ka (125) Times of rated short-circuit current breaking Times (breaking current 40kA) Operation sequence Technical data for spring operation mechanism of VB2-12 circuit breaker Open-0.3s-close-open-180s-close-open Mechanical service life Times Contact stroke mm 9±1 Over-travel mm 5±1 Average closing speed m/s 0.5~1 Average opening speed m/s 1~1.3 Contact closing bouncing time ms 2 Three-phase contact close and open asynchronization ms 2 Technical data for energy charging motor Description Unit Data Rated working voltage (Un) V AC DC110 AC DC220 The rated input power of motor W 300 Charging time under rated working voltage S 10 Normal working voltage scope 85%~110%Un Technical data for closing and opening electric magnet coils Description Unit Data Rated working voltage V DC110 DC220 Rated working current A Resistance of the magnet coil at 20 C Ω 57± ±0.5 Normal working voltage scope Closing: 85%-110%Un Breaking: 65%-120%, when <30%Un, breaking is not allowed 5

9 LDJ3-12 ( JAG-12) Technical data for LDJ3-12 (Q) (JAG-12(Q)) current transformer Rated current Accuracy class and Rated output VA Rated short time Rated peak withstand current withstand current ratio protect class 0.2S 0.2, 0.5 5P10 5P20 ka/s ka (peak) 5/5 (1) 0.6/2 2 10/5 (1) 1.1/2 3 15/5 (1) 1.7/2 5 20/5 (1) 2.7/2 7 30/5 (1) 4/ /5 (1) 5/ /5 (1) 9/ /5 (1) 0.2S/0.2S 75/5 (1) 0.2/ / /5 (1) 0.2S/5P / /5 (1) 0.2/5P10 200/5 (1) 0.5/5P10 27/ /5 (1) /5 (1) /5 (1) / /5 (1) /5 (1) /5 (1) 20 50/ /5 (1) ±0.5 A ± ± ±1.5 4-M ± ± ±2 P2 outgoing plate 108± A Side 2-M ±0.2 Size of P2 outgoing plate 2-M M In=5~600A In=800~1250A Secondary Voltage (V) / /5 600/5 500/5 400/5 300/5 3~200/ Secondary excitation current (A) As an absorption device for operation overvoltage of vacuum circuit breaker, the following type metal-oxide arresters (MOA) are available: HY2.5w (to protect motor), HY5WS (distribution), HY5WZ and (parallel compensation capacitor). 6

10 scheme Scheme No Rated current (A) 630~ ~ ~ ~1250 Vacuum breaker VB CT JAG-12 (LZZB-12) PT JDZ8 PT JDZX8 HV fuse RN2-10 ** Earthing switch JNH Arrester HY5WS Application Cable incoming or outgoing Cubicle width (mm) 800 (650) (840) 800 (650) (840) 800 (650) (840) 800 (650) (840) Note: * When the cubicle width is 650mm, the CT for LZZ8-12 can only be available. ** When the cubicle width is 650mm, the earthing switch will be JN15A. Scheme No Rated current (A) 630~ ~ ~ ~1250 Vacuum breaker VB CT JAG-12 (LZZB-12) 2 3 PT JDZ8 PT JDZX8 HV fuse RN2-10 ** Earthing switch JNH1 Application Arrester HY5WS 3 3 Coupling Cable incoming/ outgoing Disconnect or coupling Cubicle width (mm) 800 (650) (840) 800 (650) (840) 800 (650) (840) 800 (650) (840) 7

11 Scheme No Rated current (A) Vacuum breaker VB2-12 CT JAG-12 (LZZB-12) PT JDZ8 2 2 PT JDZX8 3 3 HV fuse RN Earthing switch Arrester HY5WS 3 3 Application PT Cubicle width (mm) 800 (650) (840) 800 (650) (840) 800 (650) (840) 800 (650) (840) Scheme No Rated current (A) Vacuum breaker VB2-12 CT JAG-12 (LZZB-12) PT JDZ8 2 2 PT JDZX8 3 3 HV fuse RN Earthing switch Arrester HY5WS 3 3 Application PT & coupling Cubicle width (mm) 800 (650) (840) 800 (650) (840) 800 (650) (840) 800 (650) (840) 8

12 scheme Scheme No Rated current (A) 630~ ~1250 Vacuum breaker VB2-12 CT JAG-12 (LZZB-12) PT JDZ8 2 PT JDZX8 3 HV fuse RN ** Earthing switch JNH1-12 Arrester HY5WS 3 3 Application PT Cable incoming or outgoing Cubicle width (mm) 800 (650) (840) 800 (650) (840) 800 (650) (840) 800 (650) (840) Scheme No Rated current (A) 630~ ~ ~ ~1250 Vacuum breaker VB CT JAG-12 (LZZB-12) 2 3 PT JDZ8 2 2 PT JDZX8 2 2 HV fuse RN Earthing switch JNH1-12 Application Arrester HY5WS Overhead incoming Metering & incoming Metering & coupling Cubicle width (mm) 800 (650) (840) 800 (650) (840) 800 (650) (840) 800 (650) (840) 9

13 Scheme No Rated current (A) 630~ ~ ~ ~1250 Vacuum breaker VB2-12 Application CT JAG-12 (LZZB-12) 2 2 PT JDZ8 2 2 PT JDZX8 HV fuse RN Earthing switch Arrester HY5WS Metering & Coupling Cable incoming or outgoing Disconnect or coupling Cubicle width (mm) 800 (650) (1000) 1000 (800) (650) Scheme No Rated current (A) 1600~ ~ ~ ~4000 Vacuum breaker VB CT JAG-12 (LZZB-12) PT JDZ8 PT JDZX8 HV fuse RN2-10 Earthing switch JNH Arrester HY5WS Application Cable incoming or outgoing Cubicle width (mm)

14 scheme Scheme No Rated current (A) 1600~ ~ ~ ~4000 Vacuum breaker VB CT JAG-12 (LZZB-12) PT JDZ8 PT JDZX8 HV fuse RN2-10 Earthing switch Arrester HY5WS Application Coupling overhead outgoing Cubicle width (mm) Scheme No Rated current (A) 1600~ ~ ~ ~3150 Vacuum breaker VB CT JAG-12 (LZZB-12) PT JDZ8 PT JDZX8 HV fuse RN2-10 Earthing switch JNH Arrester HY5WS Application Cable incoming or outgoing Cubicle width (mm)

15 Scheme No Rated current (A) 1600~ ~ ~ ~3150 Vacuum breaker VB CT JAG-12 (LZZB-12) PT JDZ8 PT JDZX8 HV fuse RN2-10 Earthing switch JNH Arrester HY5WS Application Cable incoming or outgoing Cubicle width (mm) Scheme No Rated current (A) 630~ ~ ~ ~1250 Vacuum breaker VB CT JAG-12 (LZZB-12) PT JDZ PT JDZX8 HV fuse XRNP ** Earthing switch JNH1 Arrester HY5WS Appication Incoming or PT PT & coupling Cubicle width (mm) 800 (650) (840) 800 (650) (840) 800 (650) (840) 800 (650) (840) 12

16 scheme Scheme No Rated current (A) 630~ ~ ~ ~1250 Vacuum breaker VB2-12 CT JAG-12 (LZZB-12) PT JDZR8-10A PT JDZX8 HV fuse XRNP Earthing switch JNH1 Arrester HY5WS Appication Incoming or PT PT & coupling Cubicle width (mm) 800 (650) (840) 800 (650) (840) 800 (650) (840) 800 (650) (840) Scheme No Rated current (A) 630~ ~ ~ ~1250 Load switch FN Disconnector GN CT LQJ PT JDZ 2 PT JDZJ 3 HV fuse RN Arrester HY5WS Application Metering & incoming Cubicle width (mm)

17 Scheme No Rated current (A) PT JDZ8 2 PT JDZX8 3 HV fuse RN Transformer SC1-30 (50) 1 HV fuse SDLNJ 3 CT BHG LV circuit breaker C45 1~6 Application PT & incoming Station transformer Cubicle width (mm) 800 (650) (840) 800 (650) (840) 800 (650) (840) Scheme No Rated current (A) 630~ ~ ~ ~1250 Vacuum breaker VB CT JAG-12 (LZZB-12) PT JDZ8 PT JDZX8 HV fuse RN-10 ** Earthing switch JNH1 1 1 Arrester HY5WS Application Cable upper incoming/outgoing Cubicle width (mm) 800 (650) (840) 800 (650) (840) 800 (650) (840) 800 (650) (840) 14

18 scheme Scheme No Rated current (A) 630~ ~ ~ ~1250 Vacuum breaker VB CT JAG-12 (LZZB-12) PT JDZ8 PT JDZX8 HV fuse RN-10 ** Earthing switch JNH1 1 1 Arrester HY5WS Application Overhead incoming/outgoing cubicle width (mm) 800 (650) (840) 800 (650) (840) 800(650) (840) 800 (650) (840) Examples of the scheme applicaiton Example 1 Example 2 15

19 Hk S21 S10 A1 A2 S11 S22 S S42 S V1 A~ A~ B- V1 A~ C+ HQ A2 D~ B- V2 A~ C+ D~ A2 1 1 A1 TQ GT1 GT2 GT DL HK HK Secondary components of circuit breakers Secondary components on trucks HK 58-pin aviation plug S8 Limit switch (test position) M Energy storage motor S9 Limit switch (servicing position) V1, V2 rectifier X02 Wiring Terminals of the truck S10, S11, S12 Energy storage position switch S21, S22 Energy storage position switch S41, S42 Energy storage position switch HQ Closing coil TQ Opening coil GT1 Over current tripping coil GT2 Over current tripping coil GT3 Over current trip coil DL Auxiliary switch Servicing position Test position S8 S9 X X02 HK

20 Transportation and Storage During the transportation and storage of the switchgear, the following should be noted: (1) Don' t tilt, collide and upside down or violent shake. (2) Prevent it from rain and dampness Don' t remove the electric components randomly so as to keep the integrity of the product. Order When ordering, customers shall provide the following documents: (1) Primary circuit scheme and the single line system drawing (2) The array diagram of the switchgears and arrangement diagram of the station (3) The specification and quantity of the electrical equipment installed in each switchgear with the list of equipments. (4) The secondary circuit diagrams. Documents and accessories For this product, the following documents and accessories will be provided: (1) Product certificate (2) Product manual (3) Array diagram and secondary wiring (4) The operation handle of breaker, earthing switch and energy storage (5) Proper number of special lifting trucks for circuit breakers Installation Foundation The construction of the foundation ground shall conform to the local specifications for electric power construction and acceptance. The allowable error of the channel steel, frame structure shall not be greater than 1mm/m. the total length variation:±3mm. Structure reference of foundation frame is shown in figure 1 & figure2. The foundation of switchgear is formed by pouring concrete in twice, once pouring the installation foundation, the second time, supplement concrete on the surface. The thickness shall be 60mm in normal; the supplemented height shall be lower than channel steel 1-3mm. Secondary cable chute Benchmark in front of the cubicle door Normal panel 1650 (Including front door and rear cover) ~3 mm Concrete supplement layer Channel steal Primary cable chute Figure 1 cable chute sketch Note: red figures in the diagram show the sizes when the cubicle' s width is 650mm. 17

21 Benchmark of the front door of the panel Normal panel (including the front door and rear seal plate) 1000* Single array 1530 Double arrays A 80* (800) 450(800) B B 800(1000) 650(1000) 600(800) n 600(800) 600(800) (800) (800) (800) (1000) 650(1000) n 800(1000) 650(1000) (1000) 650(1000) 1000* Foundational channel steel Primary cable hole A Secondary cable hole dismensions in mm Min. size A-A 80* 800(1000) 650(1000) 800(1000) 650(1000) 800(1000) 650(1000) 800(1000) 650(1000) 1000* (800) 450(800) 200 n 600(800) 450(800) (800) 450(800) Denchmark of the front door of the panel B-B Single array * (80) * 1~3 Double arrays Note: The red letters in the diagram show the sizes when there is panel with width of 650mm in the array. Figure 2 Reference structure of concrete ground foundation frame 18

22

23 Greater China Shanghai 4F, Building 2, CTP, No.1 Hua Tuo Rd. Zhang Jiang Hi-Tech Park, Shanghai, China T : F : South East Asia Malaysia Level 6, 1 Sentral, Jalan Travers, Kuala Lumpur Sentral Kuala Lumpur, Malaysia T : F : Thailand 25th floor, CRC Tower, All Seasons Place, 87/2 Wireless Road, Lumpini, Pathumwan, Bangkok T : F : India India Polt No. 42/1 & 45/14, Electronic City-Phase II Bangalore T: (080) F: (080) Australia & New Zealand Australia Long Street, Smithfield, Sydney, NSW 2164 T : F : North Asia Japan 11F, Akasaka Park Bldg.,5-2-20, Akasaka, Minato-ku Tokyo T : F : Europe & Middle East Spain P.I. Clot del Tufau, s/n, E Sant Vicenç de Castellet T: Belgium Nieuwevaart 51, B-9000 Gent T: +32 (0) Finland Kuortaneenkatu 2, FI Helsinki T: +358 (0) France Paris Nord 2, 13, rue de la Perdrix F Roissy CDG Cédex T: +33 (0) Poland Ul. Odrowaza 15, Warszawa T: and Ul. Leszczyńska 6, Bielsko-Biała T: Latin America Latin America 790 N.W. 107th Avenue, Suite 200, Miami, Fl USA T: Chile Vespucio Norte, Avenida Presidente Eduardo Frei Montalva 6001, Edificio N 66 Comuna: Conchalí, Sector el Cortijo, Santiago T: (56 2) North America USA 41 Woodford Avenue, Plainville CT, USA and Kurland Drive, Houston, TX USA T: Taiwan 6F, No. 8, Min Sheng E. Rd., Sec. 3, Taipei T : F : Philippines 8F Net Cube Building, 30th Street, Corner 3rd Avenue, Crescent West Park, Global City Taguig 1634 T : F : Vietnam Saigon Centre, Unit 1, Floor 7, Le Loi Boulevard, District 1 HoChiMinh City T : F : New Zealand Level 1, 8 Tangihua Street, Auckland, North Island T : F : Korea 3rd Floor, GE Tower, 71-3, Cheongdam-dong, Gangnam-gu Seoul, Korea T : F : Italy Centro Direzionale Colleoni, Via Paracelso 16 Palazzo Andromeda B1, I Agrate Brianza (MB) T: Netherlands Parallelweg 10, Nl-7482 CA Haaksbergen T: +31 (0) Germany Robert-Bosch Str. 2a, Hürth-Efferen T: +49 (0) 2233/ Portugal Rua Camilo Castelo Branco, 805, Apartado Vila Nova de Gaia T: Hungary Vaci ut H-1139 Budapest T: Brazil Av. María Coelho Aguiar, 215, Bloco C - 6.Andar Jd.São Luiz, , São Paulo T: Mexico Av. Churubusco 3900 Nte, Col. Industrial Benito Juárez Monterrey, N.L T: (01-800) Indonesia BRI II Tower, 27th floor, Jl. Jend. Sudirman No Jakarta T: F: Singapore 240 Tanjong Pagar Road, #06-00 GE Tower Singapore T : F : Russia 27/8, Electrozavodskaya street, Moscow, T: South Africa Unit 4, 130 Gazelle Avenue, Corporate Park Midrand 1685 P.O. Box Wendywood 2144 T: United Arab Emirates 1101, City Tower 2, Sheikh Zayed Road, P.O. Box 11549, Dubai T: United Kingdom Houghton Centre, Salthouse Road, Blackmills, Northampton NN4 7EX T: +44 (0)

24 GE Industrial Solutions You may be interested in other MV Seco-family products For more information, please visit For more information, please visit Printing Code: IN201301B20EN Copyright GE Industrial Solutions 2013