Construction Product Guide. Products for the suspension of building services

Transcription

1 onstruction Product Guide Products for the suspension of building services

2 HETING, VENTILTION, FN OIL UNITS, HILLED EMS, DUTWORK, SOLR PNELS, ONDUIT, IR ONDITIONING UNITS, MEHNIL, PIPING, LDDER TRY, LE SKET, STRIP LIGHTING, HIGH Y FLUORESENTS, TROFFER SUPPORTS, TENRIES, SHOPFITTING, SIGNGE, OUSTI FFLES, SUSPENDED EILINGS, RING. ontents bout bout Gripple 4 pplications Piping 8 HV 10 Electrical 12 Lighting 14 Modules 16 Signage 18 coustics 20 lack Line 22 Other pplications 24 Products Standard Hanger 28 Express Hanger 29 ngel Hanger 30 Stainless Steel Hanger 32 Trapeze Hanger 34 Trapeze Plus Hanger 35 QT Trapeze Plus 36 Trapeze Plus alibra 37 Trapeze able asket dapter 38 Duct Trapeze Hanger 39 utterfly Trapeze Hanger 40 Y-Fit & Y-Fit ccessory Hangers 42 able Strut & -lip Hanger 44 QT Universal lamp 46 Universal racket 47 QT ompact lamp 48 Low Profile racket 49 Universal lamp 50 End fixings Loop 54 Stud 54 Toggle 55 Hook 55 Mini Hook 56 End Stop 56 arrel 57 Top Hat arrel 57 Eyelet 58 45º Eyelet 58 90º Eyelet 59 ladding Hook 59 Ring nchor 60 eiling nchor 60 Karabiner 61 -lip 61 Shot Fire 62 Eyelag 62 Twist lip (white) 63 Swivel Toggle 63 Metal Deck Insert 64 Spider Insert 65 ccessories nchoring Solutions 68 eams & Purlins 70 rackets & ttachments 71 dapters 74 Trapeze ccessories 76 Tools & Finishing ccessories 77 Technical Technical Services 80 Hanging at ngles 82 able onstruction & ross Sections 82 Ductwork Hanger Data 83 Pipe Support Spacing Data 84 Usage Recommendations 85 Quality & pprovals

3 bout Gripple Gripple is an employee-owned company that prides itself on product innovation and a culture of charity and fun. Of the 500-strong Gripple employees working worldwide, over 100 are dedicated to servicing North merica. Our Territory Managers here are experts in providing suspension solutions for HV, Mechanical, Electrical, Lighting, coustics, and Signage. nd our manufacturing facility and support teams in urora, Illinois enable us to offer flexible, centralized service to the US, anada, and Mexico. What we do Time Savings Save up to 85% on installation times for your suspended services when you use Gripple s cable hanger kits, as compared to traditional suspension methods. Not only is the installation faster, no pre-work, such as cutting or filing, is required. Health & Safety Gripple cable hanger kits are ready-to-use straight from the box, removing the need for potentially hazardous cutting on site. One box of Standard cable hanger kits weighs just 17 lbs, doing the same job as 330 lbs of threaded rod and strut. Not only is the weight and bulk of materials to carry reduced, but also the time spent working at heights. O 2 Savings For every foot of Gripple cable specified to replace threaded rod, it is estimated that a savings of 2.7 lbs of embodied O 2 is realized. This equates to a total embodied O 2 saving of up to 95% when switching from threaded rod to Gripple cable hangers. Gripple s capabilities are recognized, admired, and trusted worldwide. From contractors to consultants, we offer: Material Take Offs (MTO s) we ll advise on what you need and where D drawings ill of Materials (Gripple product & quantities) On-site visits to discuss potential suspension solutions Product training for specific installations or for the latest new products Regular on-site advice until job completion Fast product delivery esthetics Gripple cable hanger kits are lightweight and virtually invisible from the ground. omparing 1/8" cable to 3/8" threaded rod, the difference is easy to see. With a trend towards exposed services, Gripple cable kits enhance the aesthetics significantly, especially in retail environments. We also offer a range of black cable kits ideal for cinemas, theaters and other areas where the ceiling is painted black (See 22). OVER THE OURSE OF $10 MILLION JO, YOU RE THROWING WY HLF MILE OF LL THRED. WITH GRIPPLE, IF YOU RE THROWING WY NYTHING IT S THE TIL END OF LITTLE THIN WIRE. T ENTRL WSHINGTON UNIVERSITY, ELLENSURG, W

4 pplications Piping 8 HV 10 Electrical 12 Lighting 14 Modules 16 Signage 18 coustics 20 lack Line 22 Other pplications 24 PPLITIONS

5 Piping Universal racket eam lamp Page 73 QT ompact lamp & Low Profile racket Page 45 Wall racket Page 45 Trapeze Page 34 Insulation ollars Page 72 QT Trapeze Plus Page 36 Spreader and Page 71 Universal racket Page 47 The Gripple range of supports and hangers for piping applications has been developed to provide a fast and versatile solution for suspending all types of pipe and mechanical installations. Gripple products are designed to save time & labor and reduce costs by making the installation quick and easy. Supplied in ready-to-use kits, the products in this range require no on-site cutting and eliminate the need for fabricating pipe bracket assemblies, offering enormous health and safety benefits for your project. Products shown are for internal use only. Images shown for illustrative purposes only. Please refer to product installation instructions for full information

6 HV -lip Page 61 able Strut Kit Page 44 Express Hanger Page 29 utterfly Trapeze Hanger Page 38 Trapeze Hanger Page 34 Standard Hanger Page 28 Trapeze Plus Hanger Page 35 Duct Trapeze Hanger Page 39 Y-Fit Hanger Page 42 Products shown only for internal use. Images shown for illustrative purposes only. Please refer to product installation instructions for full information. The Gripple range of hangers for HV applications has been developed to provide a fast and versatile solution for suspending ductwork, heaters, air conditioning, radiant panels, and plenum boxes. Our products are manufactured in the UK and US, and are designed to save you time and labor costs, thus improving the efficiency of your installation. Unlike traditional suspension methods, Gripple kits do not require cutting or filing. Gripple suspension solutions offer aesthetic design without compromising on strength, and are supplied in ready-to-use kits with a choice of cable length and end fixing

7 Electrical able Strut Kit -lip Page 61 Page 44 Express Hanger Page 29 Standard Hanger Page 28 Y-Fit Hanger Page 42 QT Universal lamp & Universal racket Page able asket dapter Page 38 Trapeze Plus Hanger Page 35 Trapeze Hanger Page 34 The Gripple range of supports and hangers for electrical applications has been developed to provide a fast and versatile solution for suspending all types of electrical containment. Gripple products are designed to save time & labor and reduce costs by making the installation quicker and easier. Supplied in readyto-use kits, the products in this range are lightweight, require no onsite cutting, and reduce the time spent working at heights, offering enormous health and safety benefits for your project. G-racket Page 72 Products shown are for internal use only. Images shown for illustrative purposes only. Please refer to product installation instructions for full information

8 Lighting able Strut Kit Page 44 -lip Page 61 Express Hanger Page 29 ngel Hanger Page 30 Standard Hanger Page 28 The Gripple range of suspension solutions for lighting are manufactured in the UK and US, and have been designed to save you time, money, and labor by improving the efficiency of the installation process. Unlike traditional suspension methods, Gripple kits eliminate on-site cutting or filing, resulting in much better health and safety benefits for your team. Our products offer a sleek, professional and discreet finish, without compromising on strength, and are supplied in ready-to-use kits with your choice of end fixing and cable length. ngel has a wide range of feet options available to suit your lighting application. See 31 for details. Products shown only for internal use. Images shown for illustrative purposes only. Please refer to product installation instructions for full information

9 Modules Trapeze Plus Hanger Page 35 Standard Hanger Page 28 Trapeze Hanger Page 34 The Gripple range of suspension solutions for module applications has been developed to provide fast and versatile solutions for prefabricated building services modules, even those requiring installation in tight, hard to reach places. Our products are manufactured in the UK and US, and are designed to save you time and labor costs, thus improving the efficiency of your installation. s a proven method of installation, cable hangers can be pre-installed onto modules on the ground, reducing time from module arrival on site to module installation, and with less risk of damage to the module. s a result, installation time is dramatically reduced compared to traditional methods, with no need for cutting, filing, or bending rod into place. Products shown only for internal use. Images shown for illustrative purposes only. Please refer to product installation instructions for full information

10 Signage Standard Hanger Page 28 ngel Hook Page 30 ngel has a wide range of feet options available to suit your signage application. See 31 for details. Express Hanger Page 29 ngel for Signage Page 31 The Gripple range of signage hanger products has been developed to provide a complete solution for the suspension of all forms of signage. The variety of kits allows for complete flexibility and adjustability, without the use of additional tools. The product design provides a sleek, professional finish, without compromising on strength. Our kits have been designed to save you time and labor by making installation quick and easy. Products shown only for internal use. Images shown for illustrative purposes only. Please refer to product installation instructions for full information

11 coustics able Strut & -lip Hanger Page 44 Express Hanger Page 29 coustic Spring nchor Page 74 ngel Hanger Page 30 The Gripple range of hangers for acoustic applications are manufactured in the UK and US, and have been designed to save you time, money, and labor by improving the efficiency of the installation process. Unlike traditional hanging methods, Gripple kits require no on-site cutting or filing, and offer enormous time-saving benefits for your project. Gripple products can fit directly into acoustic baffles, panels, and suspended ceilings, offering a sleek, professional and discreet finish without compromising on strength. ll products are supplied in ready-to-use kits with your choice of end fixing and cable length. Products shown only for internal use. Images shown for illustrative purposes only. Please refer to product installation instructions for full information

12 lack Line Gripple s ready-to-use suspension kits now come with the option of a black finish to further enhance the aesthetic appeal of the range. The slim and unobtrusive aesthetics of Gripple s cable suspension systems have always proved perfectly suited to the design of many modern buildings, either where building services in the ceiling space are left exposed and visible, or for specific applications such as the suspension of lighting. The new lack line of products aims to build on this success and will be ideal for use in a wide variety of environments where aesthetics and dark ceilings are prevalent, including retail spaces, theaters, exhibition venues, and concert halls. Each ready-to-use kit is supplied with a black cable, black fastener, and your choice of black end fixing. For further information please call or grippleinc@gripple.com Products shown only for internal use. Images shown for illustrative purposes only. Please refer to product installation instructions for full information

13 Other pplications Seismic racing & last Protection Seasonal Decoration (External able Strut) Rooftop racing Solutions Solar Panel

14 Products PRODUTS \ Standard Hanger Express Hanger ngel Hanger Stainless Steel Hanger Trapeze Hanger Trapeze Plus Hanger QT Trapeze Plus Trapeze Plus alibra Trapeze able asket dapter Duct Trapeze Hanger utterfly Trapeze Hanger Y-Fit & Y-Fit ccessory Hangers able Strut & -lip Hanger QT Universal lamp Universal racket QT ompact lamp Low Profile racket Universal lamp

15 Standard Hanger Express Hanger able hanger kit containing the original Gripple HangFast fastener, for suspending a variety of HV, piping, lighting, and electrical services. For the fast suspension of a variety of services, designed with an easy push-button release mechanism. The only Gripple Hanger available in sizes No.1 thru No.5, with Safe Working Loads from 25 thru 715 lbs per hanger The Express No.1 is ideal for signage, shopfitting, lighting, and other lightweight fixtures Ideal for fast suspension of any suspended service The Express is ideal for mechanical and electrical services Up to 6 times faster to install than traditional methods Up to 6 times faster to install than traditional methods Versatile and simple to use Discreet and aesthetic design Strong, safe, and industry approved Ergonomic push buttons are easy to use esthetically discreet and lightweight No release key required to adjust or level the service Fastener can be released with a Release Key to adjust or level the height of the service vailable in sizes No.1 - No.5 vailable in sizes No.1 - Supplied as ready-to-use kits with a length of cable, Standard fastener, and end fixing of your choice. Supplied as ready-to-use kits with a length of cable, Express fastener, and end fixing of your choice. 5:1 SFETY FTOR No.1 No.3 No.4 No.5 5:1 SFETY FTOR No.1 LOD RTING PER HNGER 25 lbs 100 lbs 200 lbs 495 lbs 715 lbs LOD RTING PER HNGER 33 lbs 100 lbs END FIXINGS PGE 53 ESSORIES PGE 67 TEHNIL PGE 79 HNGER KIT ODES PGE 33 END FIXINGS PGE 53 ESSORIES PGE 67 TEHNIL PGE 79 HNGER KIT ODES PGE 33 Release* Release* * When releasing: 1. Remove load, 2. Insert release key into hole, 3. Pull tail wire out * When releasing: 1. Remove load, 2. Push release buttons, 3. Pull tail wire out

16 ngel Hanger Designed for architectural lighting suspensions, signage, acoustic baffles, and installations where aesthetics are important. Simple one handed operation for easy height/leveling adjustment by pressing in on wings ontemporary design to complement the overall suspension Extensive range of cable end fixing options allowing installation in most structure types Variety of feet options to enable attachment in different ways Uses 1/16" cable to make the suspension as visually discreet as possible vailable with a range of feet options Supplied as ready-to-use kits with a length of cable, ngel fastener, and end fixing of your choice. 5:1 SFETY FTOR LOD RTING PER HNGER END FIXINGS PGE 53 ESSORIES PGE 67 No.1 33 lbs TEHNIL PGE 79 HNGER KIT ODES PGE 33 Release* ngel Feet Options The ngel fastener is extremely versatile, with a range of feet options available to suit every application. Y-Fit Dual fixing points for balance Ideal for suspending light fixtures 6, 12 and 18 leg lengths as standard Various end fixing options for legs Hook Ideal for light fittings, signage, or for use with eyebolts, spring, and wire anchors Integrated hook with 1/8" clearance Safety clasp for security Side cable exit Side Exit Female Female threaded foot, ideal for direct attachment to light fittings, frames and acoustic panels vailable in M4, M6 and 1/4 thread Maximum insertion depth Side cable exit Side Exit Male Threaded male foot, ideal for direct attachment to light fittings, frames and acoustic panels vailable in M4, M6 and 1/4 thread as standard. M5, M8, M10 and M13 adapters available 9/16" exposed thread length as standard, custom lengths on request Side cable exit (enter exit also available) Signage Ideal for signage up to 3/16" in thickness Grub screw for direct attachment Side cable exit Swivel Swivel feature for suspension at angles up to 90º vailable in M4, M6, M8 and 1/4 thread Female: maximum insertion depth Male: 9/16" exposed thread length as standard Side cable exit Knockout Ideal for strip lighting with standard 7/8 knockout holes Slots into knockout centers and twists to lock into place No tools needed, or the need to remove the back of the fixture 4 Point Ideal for light panels with multi fixing points Perfect for even balance of square modules Side wire exit Four Point disc diameter 16 mm Supplied as ready-to-use kits with a length of cable, ngel fastener, and end fixing of your choice. END FIXINGS - PGE 51 ESSORIES - PGE 65 TEHNIL - PGE 77 * When releasing: 1. Remove load, 2. Squeeze wings, 3. Raise or lower on cable

17 Stainless Steel Hanger Used to suspend a variety of mechanical and electrical services in the food industry and high humidity environments. Hanger Kit odes How to work out your unique product code 1 HOOSE YOUR PRODUT Stainless steel body and springs are corrosion resistant and long-lasting eramic rollers for extra strength and corrosion resistance esthetically discreet and lightweight vailable in two sizes load rated up to 200 lbs SWL Standard Hanger No.1 HF1 Standard Hanger HF2 Standard Hanger No.3 HF3 Standard Hanger No.4 HF4 Standard Hanger No.5 HF5 Express No.1 XP1 Express XP2 ngel Male Side Exit L1-SM14 ngel Male enter Exit L1-M14 vailable for use with Loop, 1/4 Stud, Hook, Y-Hook, Toggle, and Y-Toggle end fixings Fastener can be released with a Release Key to adjust or level the height of the service Like all Gripple hangers, not suitable for use in chlorinated or swimming pool environments vailable in sizes - No.3 ngel Swivel L1-SF1/4W L1- SM1/4W 2 ngel Female L1-SF14 ngel Hook L1-ISH ngel Y-Fit L1-YTG 300* *lso available in 150 and 460 mm leg lengths. HOOSE YOUR END FIXING ngel 4-Point L1- FPTG300 ngel Signage L1-SL5 ngel Knockout L1-KO Stainless Steel Hanger No. 2 HF2 Stainless Steel Hanger No. 3 HF3 Loop LG Stainless Steel Loop LS Stud S*G Stainless Steel Stud SQS Toggle TQG TG Stainless Steel Toggle TS Hook HG Stainless Steel Hook HS Mini Hook MHG Eyelet EYQG 45º Eyelet EY453/8G 90º Eyelet EY90*G -lip 1/8-1/8 -lip 1/4-1/4 Top Hat arrel 14 arrel *G End Stop EG ladding Hook HG Supplied as ready-to-use kits with a length of cable, stainless steel fastener and end fixing of your choice. 5:1 SFETY FTOR LOD RTING END FIXINGS PGE 53 ESSORIES PGE 67 No lbs 200 lbs TEHNIL PGE 79 HNGER KIT ODES PGE 33 Release eiling nchor WHQ 3 Swivel Toggle STG For use with Spider and Metal Deck Insert only Spider ast-in- Place Insert SK Standard SKT Threaded * dd the code SK or SKT after cable length, for example: HF2- STG-5FT-SK Metal Deck Insert MDI-Y * dd the code MDI-Y after cable length, for example: HF2- STG-5FT-MDI-Y HOOSE YOUR LE LENGTH Karabiner KG Shot Fire SF35 * Stud available in 1/4 or 3/8. arrel available in 1/4 or 3/8. 90 Degree Eyelet available in 1/4 or 3/8. In place of asterisk in code, enter Q for 1/4 or 3/8 for 3/8. Shot Fire for Post Tension oncrete 945 5FT 10FT 15FT 20FT 30FT Enter your unique product code (e.g. XP2-LG-10FT): - - Shot Fire for Post Tension oncrete NS90 * PRODUT END FIXING LE LENGTH * When releasing: 1. Remove load, 2. Release key into hole, 3. Pull tail wire out. For further product information please call or visit our website

18 Trapeze Hanger Ideal for single and multi-tiered suspension of piping, electrical and HV services in conjunction with strut or brackets. Trapeze Plus Hanger ll steel Trapeze Plus is packed with new features to make the suspension of building services even more secure, and the adjustment feature even easier. an slot into strut or brackets to suspend services with a secure cable hanger instead of threaded rod esthetic, tapered design; accommodates all slots sizes Discreet - fits completely inside the channel Pre-fits onto channel with washer to reduce working time in the air vailable as an accessory for multi-tiered installations Ideal for use with Gripple Universal racket and QT Universal lamp for piping installations an be released by pulling pin to adjust or level the height of the service vailable in sizes & No.3 Reduced time working at height; can pre-install onto strut using the washer/nut supplied; strut nut and washer also available as an accessory Easy-to-use integral release button for finite adjustment Tighten the locking screw to prevent upward movement on cable an be used to suspend multi-tiered strut to optimize space an be used with a clevis hanger to suspend piping vailable in sizes - No.4 Supplied as ready-to-use kits with a length of cable, Trapeze fastener, and end fixing of your choice. Supplied as ready-to-use kits with a length of cable, Trapeze Plus fastener, and end fixing of your choice. 5:1 SFETY FTOR LOD RTING No lbs 200 lbs 3:1 SFETY FTOR LOD RTING No.3 No lbs 200 lbs 495 lbs Release* Note: The Trapeze Plus fastener is supplied with a hex nut as standard. strut nut & washer (shown) is available separately as an accessory. Release* *When releasing: 1. Remove load, 2. Pull pin, 3. Raise or lower on cable *When releasing: 1. Remove load, 2. Push button, 3. Raise or lower on cable

19 QT Trapeze Plus Trapeze Plus alibra n innovative extension to the Trapeze Plus range, featuring a Quick Twist attachment to a Gripple Universal racket, to deliver the fastest method of installing suspended pipe or electrical services. Quarter turn attachment to Universal racket for fast and easy installation Easy-to-use integral adjustment button ensures perfect levelling Locking screw provides ultimate security Fail safe clip to secure into bracket - prevents unexpected movement Full range of end fixings deliver versatility when installing into a number of different building substrates. vailable in sizes - No.4 Engineered to adjust under load of mechanical and HV services, primarily heating / cooling panels or units. djustable by hand, even with significant load applied Easy-to-use integral release button to allow fine adjustment Tighten the locking screw for ultimate security Snap hook quickly attaches to all standard brackets and fixings able exits through the side of the hanger to avoid clashes with panels and units Ideal for suspending units within ceiling grids Supplied in ready-to-use kits vailable on the Trapeze Plus - No.3 See 47 for details on our Universal Pipe racket Supplied as ready-to-use kits with a length of cable, Trapeze Plus fastener, and end fixing of your choice. Supplied as ready-to-use kits with a length of cable, Trapeze Plus fastener, and end fixing of your choice. 3:1 SFETY FTOR No.3 3:1 SFETY FTOR Trapeze Plus alibra LOD RTING 100 lbs 200 lbs LOD RTING 200 lbs END FIXINGS PGE 53 ESSORIES PGE 67 TEHNIL PGE 79 TRPEZE KIT ODES PGE 41 END FIXINGS PGE 53 ESSORIES PGE 67 TEHNIL PGE 79 TRPEZE KIT ODES PGE *Ensure a minimum 3 inches of tail cable exits the hanger

20 Trapeze able asket dapter Ideal for single and multi-tiered suspension of cable, baskets. Easily twists onto rails of cable basket* Eliminates the need for strut bearers Easy-to-use integral release pin on Trapeze allows for height adjustments Designed to suspend cable basket up to 40 lbs/ft (based on 5 ft bracket spacing) * Per cable basket manufacturer recommendations vailable in size Duct Trapeze Hanger Ideal for fast suspension of rectangular ducting or similar services. Eliminates the need for a strut support Suitable for ducting made from mm gauge steel Spreads the load across three fixing points ttaches with self-drilling screws or pop rivets (not provided) Optional rubber pad prevents air leakage and dampens vibration Release pin allows rapid height adjustment vailable in size Rubber Pad is Sold Separately ll hangers are supplied as ready-to-use kits with a length of cable and end fixing of your choice. Supplied as ready-to-use kits with a length of cable, Duct Trapeze fastener and end fixing of your choice. 5:1 SFETY FTOR 5:1 SFETY FTOR LOD RTING 100 lbs LOD RTING 100 lbs END FIXINGS PGE 53 ESSORIES PGE 67 TEHNIL PGE 79 TRPEZE KIT ODES PGE 41 END FIXINGS PGE 53 ESSORIES PGE 67 TEHNIL PGE 79 TRPEZE KIT ODES PGE 41 Release* Release* *When releasing: 1. Remove load, 2. Pull pin, 3. Raise or lower on cable *When releasing: 1. Remove load, 2. Pull pin, 3. Raise or lower on cable

21 utterfly Trapeze Hanger Trapeze Kit odes How to work out your unique product code Ideal for fast suspension of rectangular ducting or similar services that are hung close to the ceiling. 1 HOOSE YOUR PRODUT Simple height adjustment using the integral pin prior to applying load Spreads the load across four fixing points Rubber pad prevents air leakage and dampens vibration an be used for multi-tiered installations Trapeze STZ2 utterfly Trapeze ST2 Trapeze No.3 TZ3 Trapeze with able basket dapter STZ2 *dd the code 6 after cable length. For example STZ2-LG-10FT- 6 Trapeze Plus MTZ2 Trapeze Plus with square nut & washer MTZ2-SN Trapeze Plus No.3 MTZ3 * For Trapeze Plus No.3 with square nut & washer, add the code SN after cable length. For example MTZ3-LG- 10FT-SN Trapeze Plus No.4 MTZ4 * For Trapeze Plus No.4 with square nut & washer, add the code SN after cable length. For example MTZ4-LG- 10FT-SN QT Trapeze Plus No. 2-4 MTZ2 MTZ3 MTZ4 * For QT Trapeze Plus -4 add the code QT after cable length. For example MTZ4-LG- 10FT-QT Trapeze Plus alibra MTZ3 * For Trapeze Plus alibra add the code L after cable length. For example MTZ4-LG- 10FT-L Duct Trapeze SDT2 2 HOOSE YOUR END FIXING Loop LG Stud S*G Toggle TG TQG Hook HG Mini Hook MHG Eyelet EYQG 45º Eyelet EY453/8G 90º Eyelet EY90*G -lip 1/8-1/8 Supplied as ready-to-use kits with a length of cable, utterfly Trapeze fastener, and end fixing of your choice. -lip 1/4-1/4 Top Hat arrel 14 arrel *G End Stop EG ladding Hook HG eiling nchor WHQ Swivel Toggle STG For use with Spider and Metal Deck Insert only Spider ast-in- Place Insert SK Standard SKT Threaded * dd the code SK or SKT after cable length, for example: TZ3- STG-5FT-SK Metal Deck Insert MDI-Y * dd the code MDI-Y after cable length, for example: TZ3- STG-5FT-MDI-Y 5:1 SFETY FTOR LOD RTING 100 lbs Karabiner KG Shot Fire SF35 Shot Fire for Post Tension oncrete 945 Shot Fire for Post Tension oncrete NS90 *Stud available in 1/4 or 3/8. arrel available in 1/4 or 3/8. 90 Degree Eyelet available in 1/4 or 3/8. In place of asterisk in code enter Q for 1/4 or 3/8 for 3/8. END FIXINGS PGE 53 ESSORIES PGE 67 TEHNIL PGE 79 TRPEZE KIT ODES PGE 41 3 HOOSE YOUR LE LENGTH Release* 5FT 10FT 15FT 20FT 30FT Enter your unique product code (e.g. TZ2-LG-10FT): - - * PRODUT END FIXING LE LENGTH *When releasing: 1. Remove load, 2. Pull pin, 3. Raise or lower on cable For further product information please call or visit our website

22 Y-Fit & Y-Fit ccessory Y-Fit Kit odes Single point suspension at ceiling with two leg attachment points Ideal for light fixtures and cable baskets How to work out your unique product code 1 HOOSE YOUR PRODUT One leg can be detached to allow for cable installation vailable with a range of end fixings for legs (hooks, toggles, etc.) and a variety of leg lengths ccessory version available for use with another Gripple hanger; ideal for longer drops Use with standard Gripple Fastener or Express Fastener ccessory version available Y-Fit No.1 YHF1 2 Y-Fit YHF2 Y-Fit No.3 YHF3 HOOSE YOUR LEG END FIXING Y-Fit ccessory No.1 Y1 Y-Fit ccessory Y2 Y-Fit ccessory No.3 Y3 Loop LG Toggle TQG TG Hook HG 3 HOOSE YOUR LE LENGTH* 5FT 10FT 15FT 20FT 30FT *Not applicable for Y-Fit ccessory 4 HOOSE YOUR LEG LENGTH* Supplied as ready-to-use kits with a length of cable, Gripple fastener, and end fixings of your choice. END FIXINGS - PGE 53 ESSORIES - PGE 67 TEHNIL - PGE MM 300MM 460MM *150MM = 6, 300MM = 12, 460MM = 18. ustom leg lengths are also available. Release Enter your unique product code (e.g. YHF3-HG-10FT-300MM): PRODUT LEG END FIXING LE LENGTH LEG LENGTH For further product information please call or visit our website

23 able Strut Kit & -lip Hanger able Strut Kit odes reate secure, overhead spans by running high strength cable between two fixed points. Ideal for applications where no direct vertical anchor point is available. The Gripple -lip, an innovative twist-on/ off device, allows you to suspend from anywhere along the horizontal span. D3 D6 How to work out your unique product code 1 HOOSE YOUR PRODUT Visually discreet and lightweight llows for suspension of services exactly where needed No tools needed to install vailable in 1/8" and cable diameters, for suspensions up to 220 lbs per span -lip End Fixing allows for horizontal and vertical adjustment ams lock solidly in place, even at angles up to 60 vailable in 1/8 and 1/4 systems 1/8 able Strut TI-1/8 1/4 able Strut TI-1/4 2 HOOSE YOUR LE LENGTH 10FT 15FT 20FT 25FT 50FT 75FT 100FT Enter your unique product code (e.g. TI-1/8-75FT): - PRODUT LE LENGTH Supplied as ready-to-use kits, including galvanized cable cut to length, two fasteners, and a release key. -lip End Fixing can be ordered to suspend any Gripple hanger from the able Strut Kit (see product code s) able Strut Wall rackets are available to complement the able Strut Kit using the code below 5:1 SFETY FTOR LOD RTING LE SPN 1/8 1/4 66 lbs 220 lbs -lip 1/8" End Fixing ode -1/8 ESSORIES - PGE 67 TEHNIL - PGE 79 Lock / Release -lip T-RKET-4IN End Fixing ode -1/4 For further product information please call or visit our website

24 QT Universal lamp The Quick Twist Universal lamps are used in conjunction with Gripple Pipe rackets for quick and easy support of all types of piping. Replaces 12 different pipe hanger sizes Suitable for all pipe sizes from ø 1/2" to ø 6" OD Improved insulation against vibration Quarter turn fixing to attach to Pipe racket - tool free attachment and adjustment Retractable, removable sleeve, pre-fitted to cable to prevent galvanic corrosion an be used over alsil or rmafix insulation (also available) Spreader and accessory available to distribute the weight of the suspended piping more evenly along the cable Universal racket Pipe rackets are supplied with Quick Twist Universal lamps for quick and easy support of piping. Quick and easy installation - Universal rackets are supplied with QT Universal lamps featuring quarter turn fixing Versatile - an be bolted directly to soffit or wall, or suspended using threaded rod or Gripple Trapeze hangers Saves labor time - Eliminates the need for cutting channel on site, allowing more productive use of labor Improves health and safety - No tools required for installation an be purchased pre-assembled on request vailable in sizes P1FT, P2FT, P3FT, and P4FT Supplied in ready-to-use kits with Universal racket sizes 1, 2, 3, or 4 ft. 3:1 SFETY FTOR LOD RTING QT UNIVERSL LMP 170 lbs Supplied as ready-to-use kits with QT Universal lamps. ESSORIES PGE 67 TEHNIL PGE 79 PIPING KIT ODES PGE 51 ESSORIES PGE 67 TEHNIL PGE 79 PIPING KIT ODES PGE 51 LIK!

25 QT ompact lamp The Quick Twist ompact lamps are used in conjunction with Low Profile rackets for lower profile support of all types of piping. Low Profile racket Low Profile rackets are supplied with Quick Twist ompact lamps for lower profile support of piping. lower profile than the QT Universal lamp Up to 6 times faster than traditional methods Suitable for all pipe sizes from ø 1/2" to ø 6" OD Replaces 12 different pipe hanger sizes Quarter turn fixing to attach to pipe bracket - tool free attachment and adjustment an be used over alsil or rmafix insulation (also available) Improved insulation against vibration Spreader and ccessory available to distribute the weight of the suspended piping more evenly along the cable lower profile version than the standard pipe bracket Quick and easy installation - rackets are supplied with QT ompact lamps featuring quarter turn fixing Versatile - an be bolted directly to soffit or wall Saves labor time - Eliminates the need for cutting channel on site, allowing more productive use of labor Improves health and safety - No tools required for installation an be purchased pre-assembled on request vailable in sizes LP1FT, LP2FT, LP3FT and LP4FT Supplied in ready-to-use kits with Low Profile racket sizes 1, 2, 3 or 4 ft. 3:1 SFETY FTOR LOD RTING QT OMPT LMP 170 lbs Supplied in ready-to-use kits with QT ompact lamps. ESSORIES PGE 67 TEHNIL PGE 79 PIPING KIT ODES PGE 51 ESSORIES PGE 67 TEHNIL PGE 79 PIPING KIT ODES PGE 51 LIK! 90º LIK!

26 Universal lamp The 3/8 threaded Universal lamp is engineered for hanging all types of piping within mechanical and plumbing services. an be suspended from threaded rod or strut Suitable for all pipe sizes from ø 1/2" to ø 6" OD Replaces 12 different pipe hanger sizes Retractable, removable sleeve is pre-fitted to cable to prevent galvanic corrosion Improved insulation against vibration lso available as a pre-assembled strut attachment kit; includes a 2-inch length of threaded rod, a hex nut, and square washer an be used over alsil or rmafix insulation (also available) Spreader and accessory available to distribute the weight of the suspended piping more evenly along the cable Piping Kit odes How to work out your unique product code 1 Pipe racket 1ft P1 Low Profile Pipe racket 1ft LP1 HOOSE YOUR PIPE RKET Pipe racket 2 ft P2 Low Profile Pipe racket 2 ft LP2 Pipe racket 3 ft P3 Low Profile Pipe racket 3 ft LP3 Pipe racket 4 ft P4 Low Profile Pipe racket 4 ft LP4 2 HOOSE YOUR LMP QUNTITY HOOSE YOUR TYPE OF LMP Supplied individually or as part of a custom bracket system to suit your application. 3:1 SFETY FTOR LOD RTING (below mount) 6:1 SFETY FTOR LOD RTING (above mount) UNIVERSL LMP 170 lbs (below mount) / 1,000 lbs (above mount) QT Universal lamp T QT ompact lamp Threaded Universal lamp 3/8 QT Universal coustic lamp 3/8SN QT Universal lamp TL QT ompact lamp L ESSORIES PGE 65 TEHNIL PGE 77 PIPING KIT ODES PGE 49 Lock / Release Threaded Universal lamp 3/8L QT Universal coustic lamp 3/8SNL QT Universal coustic lamp T QT ompact coustic lamp Enter your unique product code (e.g. LP3-3G2--24IN): Threaded Universal coustic lamp 3/8 Threaded Universal coustic lamp 3/8SN - G I N PIPE RKET LMP QUNTITY TYPE OF LMP LE LENGTH (IN) For further product information please call or visit our website

27 End Fixings END FIXINGS Loop & Stud Toggle & Hook Mini Hook & End Stop arrel & Top Hat arrel Eyelet & 45º Eyelet 90º Eyelet & ladding Hook Ring nchor & eiling nchor Karabiner & -lip Shot Fire & Eyelag Twist lip & Swivel Toggle Metal Deck Insert Spider Insert 53

28 Loop Toggle Inserts into specific hole diameters of light fixtures, metal decking, and other pre-drilled structures or services vailable to fit 1/4, 5/16, and 3/8 hole sizes, up to 200 lbs SWL, with up to a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard lso available in Stainless Steel End Fixing that installs by a non-invasive, simple, choke knot technique an be choked around a beam, bar joist, strut, or roof trusses vailable up to 715 lbs SWL, with up to a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard lso available in Stainless Steel vailable with these Hangers Page 28 Page 29 Page 30 Size No.1 (0-25 lbs) Page 35 Page 38 Page 39 pprox. 1 3/16" 2 3/8" vailable with these Hangers End stop Page 40 ( lbs) 1 3/16" No.3 ( lbs) 1 3/16" No.4 ( lbs) No.5 ( lbs) Page 28 Page 29 Page 30 Page 34 D E 2 3/8" Page 35 Page 38 Page 39 Ø Ø D E 5/16" 1 9/16" 7/32" 5/16" 15/32" 1 9/16 5/16 1/4 1/4 15/32 1 9/16 1/4 3/8" 3/4" 2" 3/8" No.1 (0-25 5/32" lbs) Page 40 ( lbs) 2 3/8" 1 3/4" Size Toggle Page 34 pprox /4" No.3 ( lbs) 3 1/2" Ensure a minimum 3" of tail wire exits the fastener. Install fixings in accordance with manufacturer's specifications. Install fixings in accordance with manufacturer's specifications. Stud Hook End fixing that installs into an anchor or internally threaded concrete insert vailable in and 3/8", up to 495 lbs SWL, with up to a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard lso available in Stainless Steel Quick and easy attachment to cable basket, tray, beam & purlin clips, and light fixtures vailable up to 200 lbs SWL, with up to a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard lso available as stainless steel vailable with these Hangers Size No.1 (0-25 lbs) 1" 2" 1" 2" 2" 4" 3/8" 1 7/8" 2 3/4" Page 28 Page 29 Page 30 Page 34 Page 35 Page 38 Page 39 Page 40 ( lbs) No.3 ( lbs) No.4 ( lbs) vailable with these Hangers Page 28 Page 29 Page 30 1" 2" 2" 4" 3/8" 1 3/4" 3 3/4" 3/8" 1 3/4" 3 3/4" Page 35 Page 38 Page 39 Size No.1 (0-25 lbs) 5/8" 3" ( lbs) 5/8" 3" No.3 ( lbs) 5/8" 3" Page 34 Install fixings in accordance with manufacturer's specifications. 54 Page 40 Install fixings in accordance with manufacturer's specifications

29 Mini Hook Smaller version of the hook, ideal for cable basket & light fixtures vailable up to 33 lbs SWL, with a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard vailable with these Hangers arrel ttaches to any or 3/8" male thread product Ideal for use on signage or exposed services, such as in retail and office environments vailable up to 200 lbs SWL, with up to a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard vailable with these Hangers Page 28 Page 29 Page 30 Size No.1 (0-25 lbs) 3/16" 2 3/16" Page 28 Page 29 Page 30 Page 34 Page 35 Page 38 Page 39 Page 40 D Size No.1 (0-25 lbs) ( lbs) D 7/16" 1 3/4" 1" 7/16" 1 3/4" 1" 3/8" 1/2" 1 3/4" 1" No.3 ( lbs) 3/8" 1/2" 1 3/4" 1" Install fixings in accordance with manufacturer's specifications. Install fixings in accordance with manufacturer's specifications. End Stop Simple, slide-in installation for suspending from lighting channels, track, and other channel fixtures vailable up to 200 lbs SWL, with up to a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard For use with No.1 - No.3 Gripple hangers Top Hat arrel esthetic threaded end fixing ideal for use when lighting/ services are exposed/visible vailable up to 100 lbs SWL with up to a 5:1 safety factor Two-part construction for fast installation using sunk screws Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard vailable with these Hangers vailable with these Hangers Page 28 Page 29 Page 30 Page 34 Size D Page 28 Page 29 Page 30 Page 34 Size Page 35 Page 38 Page 39 Page 40 D No.1 (0-25 lbs) 5/32" 5/16" 1/16" Page 35 Page 38 Page 39 Page 40 No.1 (0-25 lbs) 11/16" 9/16" 1" ( lbs) 5/16" 15/32" 1/16" ( lbs) 11/16" 9/16" 1" No.3 ( lbs) 3/8" 3/4" 1/8" Install fixings in accordance with manufacturer's specifications. Fix using screw. Install fixings in accordance with manufacturer's specifications

30 Eyelet 90º Eyelet For fixing sideways into wood beams, speakers or visual display, light fixtures, or other applications that require bolting to brackets or fixtures vailable up to 200 lbs SWL, with up to a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard vailable with these Hangers Page 28 Page 29 Page 30 an be shot fired into concrete or steel Ideal for use with Gripple concrete screws for direct soffit mounting vailable up to 200 lbs SWL, with up to a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable with these Hangers Page 34 Size Page 28 nchor size Ø Page 38 Page 39 Page 40 Page 30 Page 34 nchor size Ø No.1 (0-25 lbs) ( lbs) 3/8" No.3 ( lbs) 3/8" 3/8" Size Page 35 Page 35 Page 29 Page 38 Page 39 Page 40 No.1 (0-25 lbs) 1" 1 1/2" 1 3/4" ( lbs) 1" 1 1/2" No.3 ( lbs) 1" 1 1/2" 1 3/4" 1 3/4" 3/8" 1 3/4" 1 5/16" Install fixings in accordance with manufacturer's specifications. Install fixings in accordance with manufacturer's specifications. 45º Eyelet ladding Hook Ideal for use in bracing applications vailable up to 200 lbs SWL, with up to a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard Designed to fit holes in metal decking roof structures Suitable for every grade of steel Supplied as a ready-to-use kit with Gripple fastener and length of cable Safe working load may vary dependent on the thickness of steel to which it is attached vailable in lengths of 5 ft - 30 ft as standard vailable with these Hangers vailable with these Hangers Size nchor size Ø Page 29 Page 28 Page 29 Page 30 Page /8" 2 1/16" Page 35 Page 38 Page 39 Page 40 Size nchor size Ø Page 28 (0-100 lbs) 3/8" No.3 ( lbs) 3/8" 1 1/8" 2 1/16" No.1 (0-25 lbs) 2 3/8" 15/16" ( lbs) 2 3/8" 15/16" Install fixings in accordance with manufacturer's specifications. Install fixings in accordance with manufacturer's specifications

31 Ring nchor Karabiner Provides 3/8" clearance vailable up to 200 lbs SWL, with up to a 5:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable; ideal for use with Loop end fixing vailable in lengths of 5 ft - 30 ft as standard Ideal for fixing into concrete and cracked concrete Shallow anchorage depth of 1" vailable up to 100 lbs SWL, with a 3:1 safety factor Supplied as a ready-to-use kit with Gripple fasteners and length of cable; ideal for use with Loop end fixing vailable in lengths of 5 ft - 30 ft as standard vailable with these Hangers vailable with these Hangers Page 28 Page 29 Page 30 Page 34 Page 35 Page 38 Page 39 Page 40 Size Page 28 Page 29 Page 30 Page 34 Size No.1 (0-25 lbs) 3/8" 2 3/8" ( lbs) 3/8" 2 3/8" No.3 ( lbs) 5/16" 3/8" 3 1/8" Size 1/8" -lip 1/2" 1" 1 5/16" -lip 15/16" 1 3/4" 1 3/4" No.1 (0-25 lbs) 2 1/8" Page /8" Page 38 Page 39 Page 40 ( lbs) 2 1/8" 1 3/8" Install fixings in accordance with manufacturer's specifications. Install fixings in accordance with manufacturer's specifications. eiling nchor -lip Ideal for fixing Gripple hangers into concrete Knock into a pre-drilled hole, pull with a claw hammer to set vailable up to 100 lbs SWL, with a 3:1 safety factor Supplied as a ready-to-use kit with Gripple fastener and length of cable vailable in lengths of 5 ft - 30 ft as standard Designed to suspend a Gripple hanger from Gripple able Strut One handed installation, no tools required llows horizontal and vertical adjustment ams lock solidly in place even at angles up to 60 1/8" and versions available vailable up to 100 lbs SWL with up to a 5:1 safety factor Supplied as a ready-to-use kit with length of cable and Gripple fastener vailable with these Hangers Page 28 Page 35 Page 29 Page 38 Page 30 Page 39 Page 34 Page 40 Size No.1 (0-25 lbs) 2 9/16" 2" vailable with these Hangers Page 28 Page 35 ( lbs) 2 9/16" 2" Page 29 Page 38 Page 30 Page 39 Install fixings in accordance with manufacturer's specifications Page 34 Page 40 Install fixings in accordance with manufacturer's specifications

32 Shot Fire Shot fire into concrete, or concrete over metal deck an be installed with gas and powder-actuated tools Quick and easy fastening solution Supplied as a ready-to-use kit with Gripple fastener and length of No. 1 or No. 2 cable Please reference submittal data for safe working loads vailable in lengths of 5 ft - 30 ft as standard Twist lip (White) Designed for use on 1" T-ar grid ceilings Ideal for use with No. 1 End stop hanger Quick and easy to install - no tools required Rated at 11 lbs. SWL with a 5:1 safety factor Will not cause damage to the T-ar grid vailable as part of a ready-to-use hanger kit or in bulk as an accessory vailable with these Hangers vailable with these Hangers D Page 28 Page 29 Page 30 Page /16" 1 1" 9/16" Page 35 Page 38 Page 39 Page 40 SF NS90 Page 28 Page 29 Page 30 D Nail lip Shank length Head diameter SF35 1 5/16" 945 7/8" 5/16" Install fixings in accordance with manufacturer's specifications. NS90 1" 19/64" Install fixings in accordance with manufacturer's specifications. Eyelag For suspending ceilings and other acoustic applications ttaches to wood and sheet steel ll screws are made with carbon steel and are zinc plated vailable in No.1 and No. 2 hanger kits Swivel Toggle Only for use with Gripple Spider and Metal Deck Inserts Inserts into Spider or MDI from below Supplied as a ready-to-use kit with Gripple fastener and length of No. 2 or No. 3 cable vailable with these Hangers ELS ELW ELD vailable with these Hangers Page 28 Page 29 Page 30 Page 34 ELS Page 28 Page 29 Page 30 Page 34 Dimension Size 3" 1 1/2" Page 35 Page 38 Page 39 Page 40 ELW 3" Page 35 Page 38 Page 39 Page 40 for MDI for Spider Install fixings in accordance with manufacturer's specifications. ELD 2" Install fixings in accordance with manufacturer's specifications

33 9 16 Metal Deck Insert Spider Insert Specifically designed to pre-install into metal deck prior to the concrete being poured Rubber head prevents the entry hole from being blocked with concrete Tube allows for easy insertion of Swivel Toggle end fixing ccommodates either or No.3 size Gripple Hanger Supplied as a ready-to-use kit which includes the Metal Deck Insert, length of cable with Swivel Toggle End Fixing, and Gripple fastener Threaded version is also available, for use with a 3/8" threaded rod Specifically designed as a cast-in-place concrete anchoring solution Robust construction withstands on-site conditions before, during, and after the concrete pour Various color options available, allowing contractors to easily identify their own inserts from below Supplied as a ready-to-use kit which includes a Spider Insert, length of cable with Swivel Toggle end fixing, and Gripple fastener Threaded version also available, for use with 3/8" Gripple stud hanger or threaded rod vailable with these Hangers Page 28 Page 29 Page 30 Page 34 Page 35 Page 38 Page 39 Page 40 D E Insert Version Swivel Toggle Version Threaded Version Ø 2 3/8" 1" 7/32" D 2 3/16" E 1 1/2" 2 3/4" 1" 7/32" 2 3/4" N/ vailable with these Hangers Page 28 Page 29 Page 30 Page 34 Page 35 Page 38 Page 39 Page /8" 1 5/8" 4 1/2" Install fixings in accordance with manufacturer's specifications. Install fixings in accordance with manufacturer's specifications

34 ccessories nchoring Solutions 68 eams & Purlins 70 rackets & ttachments 71 dapters 74 Trapeze ccessories 76 Tools & Finishing ccessories 77 ESSORIES 66 67

35 nchoring Solutions Drop-In nchor 1/2" 1/2" Max. SWL (lbs) 1" /8" 495 Hole Ø 3/8" 1/2" Min. Hole depth* 1 3/4" F 3:1 Safety rating - load rating is dependant on base material nchorage depth* 1" 1 5/8" oncrete Wire nchor * For further information contact Gripple Technical Services Suitable for non-cracked concrete, precast hollow concrete, and hard natural stone Stainless steel (304/2) 100lb. SWL applicable to 20/25 concrete WS32 Easy-fit slotted/hex head screw suitable for wood and non-cracked concrete Ideal for use with the Eyelet and 90 Eyelet End Fixings ( 58-59) Removable; excellent corrosion resistance Page 77 3:1 Safety rating - load rating is dependant on base material 3/8" oncrete/wood Screw Suitable for non-cracked concrete, precast hollow concrete and hard natural stone Internal threaded anchor with flared end for easy setting Product code DP-1/4 DP-3/8 nchoring Solutions Product code F Max. SWL (lbs) Hole Ø Min. Hole depth* Min. nchorage depth* WS32 1 5/16" 100 7/32" 1 3/8" 1 * For further information contact Gripple Technical Services Pigtail Fast and secure anchor suitable for use with the Loop End Fixing ( 58) Ideal for use with the Drop-In nchor ( 68) llows Loop to be removed for maintenance Page 77 5:1 Safety rating - dependent on base material 3:1 Safety rating - load rating is dependent on base material Product code Max. SWL (lbs) Hole Ø Min. Hole depth* Min. nchorage depth* WIRE-NHOR 1/2" 2" 100 5/16" 1 1 Product code PIGTIL6-20MM PIGTIL6-45MM * For further information contact Gripple Technical Services 1 3/16" 1 3/4" 3" 4" Max. SWL (lbs) * For further information contact Gripple Technical Services racked oncrete Ring nchor Suitable for cracked and non cracked concrete Self-expanding anchor Fire rated Spider Insert ast-in-place concrete solution Internally threaded version for use with 3/8 threaded rod or Gripple Stud Hanger Max. Safe Working Load: 700 lbs 3:1 Safety rating 3:1 Safety rating - load rating is dependent on base material Product code Max. SWL (lbs) Hole Ø Min. Hole depth* Min. nchorage depth* Product code R6 2 1/8" 1 3/8" /8" 1" SPIDER-3/8TH 1 1/8" 1 5/8" 4 1/2 * For further information contact Gripple Technical Services * For further information contact Gripple Technical Services oncrete eiling nchor Self-expanding eyelet hanger suitable for non-cracked concrete, precast hollow concrete, and hard natural stone Knock into a pre-drilled hole and pull with a claw hammer to set Ideal for use with the Standard Hanger ( 28) Metal Deck Insert Pre-insert solution for metal decks Internally threaded version for use with 3/8 threaded rod Max. Safe Working Load: 700 lbs Product code Ø Max. SWL (lbs) Min. Hole depth* Min. nchorage depth* WHQ 2 3/16" /4" 1" 9 16 D 3:1 Safety rating * For further information contact Gripple Technical Services 68 3:1 Safety rating - load rating is dependant on base material Product code D Ø MDI-Y-3/8TH 2 3/4" 1" 11/16" 7/32"

36 eams & Purlins eam lip rackets & ttachments Universal racket Hammer-on installation ccommodates a wide variety of flange thicknesses Ideal for use with the Hook End Fixing ( 55) For use with Gripple QT Universal lamp and Universal lamp (s 46 & 50) an be bolted directly to soffit or wall, or suspended from the soffit using threaded rod or Gripple Trapeze Hangers Eliminates the need for cutting channel on site 3:1 Safety rating Product code G24 G59 G1016 G1720 Flange Thickness 1/16" - 1/8" 1/8" - 5/16" - 1/2" 9/16" - 3/4" Ø 9/32" 9/32" 9/32" 9/32" 1 3/16" /16" 1 7/8" GF racket Designed for clamping onto an I-eam section Suitable for - 1/2" flange thickness Use with 1/2" threaded rod (not supplied) Ideal for use with able Strut Kits ( 44) Product code P1FT P2FT P3FT P4FT 1 3/8" 1 3/8" 1 3/8" 1 3/8" 1 11/16" 1 11/16" 1 11/16" 1 11/16" Max. Single Point Load (lbs) Max. racket load (above mount) D Shown hanging w/ Gripple Trapeze hangers an be bolted directly to soffit or wall Eliminating the need for cutting channel on site, allowing more productive use of labor For use with Gripple QT ompact lamp ( 48) 3:1 Safety rating 1.7:1 Safety rating Product code Flange Thickness D Max. SWL (lbs) GF12-EYENUT - 1/2" 1 3/4" 1 7/8" 2 3/16" 1 3/16" 750 GF16-EYENUT GF20-EYENUT 5/16" - 5/8" 3/8" - 3/4" /64" 2 7/16" 2 41/64" 2 3/16" 2 3/16" 1 3/16" 1 3/16" llows brackets to be fixed directly to beams for pipe runs close to the deck Suitable for a wide range of flange sizes (up to 1.57 ) Quick and easy installation Robust, mild steel construction 12" 24" 36" 48" Low Profile racket Pipe racket eam lamp 1.6:1 Safety rating Max. SWL (lbs) Max. Single Point Load (lbs) Max. racket load LP1FT LP2FT LP3FT LP4FT 14" 26" 37" 47" 3 5/64" 3 5/64" 3 5/64" 3 5/64" 1/2" 1/2" 1/2" 1/2" Spreader and Product code Distributes the weight of the suspended service more evenly along the cable Snap to length as required; live hinges allow for flexibility of use Easily attaches to cable with integrated clips Ideal for use with insulation, fabric duct and bundled cable or Product code P-EM-LMP-2P 3.26" 1.77" M10 Load Rating (lbs) 200 Product code SPREDER-ND 12" 1 5/8" 3/4" Wall racket E Designed to support piping and/or electrical services when installed cantilevered and parallel to the wall Wall rackets are supplied with Universal rackets and Quick Twist-Universal lamps featuring quarter turn attachment an be bolted directly to soffit or wall G F EE D G G FF D D Product code D E F G Ø 0.49 Ø 0.49 Ø Ø 0.39 Ø 0.39 Ø WLL-RKET 3 lengths available

37 rackets & ttachments rackets & ttachments Roundup Plus Saddle 180 metal pipe insulation saddle, 22 gauge galvanized steel Peel & stick tape secures the saddle to the pipe insulation 12 length with various saddle diameters 2 thru 6.5 Ideal for use with QT Universal lamp, QT ompact lamp, and Universal lamp (s 46-50) Step 1 Step 2 Trapeze racket Easily attached to rectangular ducting with #10 3/4" self-drilling screws Replaces the need for threaded rod or duct strap Rigid 14 gauge steel thickness with galvanized finish Use with or No. 3 Trapeze Hanger ( 34) D 5:1 Safety rating Product code IS* 12" X* Step 3 Product code D Max. SWL (lbs) TPZ-RKET 1 7/8" 3/16" 1 1/2" 1" 200 * x = Saddle diameter: 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6.5 Pipe Insulation ollars able Strut Wall racket For use with all Gripple pipe clamps Universal - for mild steel, stainless steel, copper and plastic pipes in a range of sizes High performance - reduced heat loss & highly moisture resistant Temperature range: alsil 20 F to F rmafix -297 to +221 Thermal conductivity: alsil 0.40 TU in/h ft 2 F rmafix 0.27 TU in/h ft 2 F " x 4" back plate for concrete walls and wooden beams 4 x 7/16" diameter mounting holes 2 1/2" hole spacing 3/8" ring for easy cable attachment Zinc plated finish (minimum 5 µ) 3:1 Safety rating Product code D Max. SWL (lbs) T-RKET-100-MM 4" 1 3/4" 2 1/2" 7/16" 750 D G-racket M6 & M8 dapter Purpose made for cable tray and basket rackets can be easily joined together either vertically or horizontally with coupling bolts Ideal for use with the Y-Fit and Y-Fit ccessory ( 42) D Max 60º Ideal for fixing to many services such as light fixtures an be fixed into concrete using a metric Drop-In nchor ( 68) vailable in metric threads only D 3:1 Safety rating Product code D Max. SWL (lbs) G-RKET /4" 6 1/2" 3" 4 3/4" 130 G-RKET /8" 10 3" 7 7/8" 130 G-RKET /8" 14 1/2" 3" 12 5/8" 130 5:1 Safety rating - dependent on material Product code D Max. SWL (lbs) DP-M6 M6 1/8" 3/4" 1" 200 DP-M8 M8 1" 1 1/2" 500 G-Spacer Joins two G-rackets together, either vertically or horizontally allowing a central gap (max. 12 in) Links different sizes of G-racket together djustable Max 60º 5:1 Safety rating Product code G-SPER 1 1/32" 13" x

38 dapters dapters Spring lip Used for attaching to top of light fixture with hole Ideal for use with the Standard Hanger or Express Hanger ( 28-29) T-ar Twist lip Ideal for attaching to suspended ceilings Integral male thread Ideal for use with the arrel End Fixing ( 57) Suitable for 1" T-ar 3:1 Safety rating - dependent on material thickness 5:1 Safety rating Product code Max. SWL (lbs) LIP-SPG-68 1" 1 1/2" 66 Product code Max. SWL (lbs) TR-LIP-Q 5/8" 1" 45 LSK lip General purpose clip to support light fittings Steel with zinc plated finish Designed to fit into 7/8" knockouts on top of light fixtures Karabiner Versatile fixing, easy to attach and detach For use with Loop End Fixing ( 54) vailable in stainless steel 5:1 Safety rating 3:1 Safety rating Product code Hole ø Max. SWL (lbs) LIP-LSK 7/8" 7/8" 1 3/8" 2" 18 Product code Max. SWL (lbs) KR /16" 2 3/8" 100 KR-6-60-S 5/16" 2 3/8" 100 KR /16" 1/2" 3 5/32" 200 KR-8-80-S 5/16" 1/2" 3 5/32" 200 V-racket Fits into mounting holes of light fixtures Steel with zinc plated finish Side mount bracket for side of light fixture (VSM) Front mount bracket for top of light fixture (VFM) VSM VFM VSM VFM able asket dapter For use with Trapeze No. 2 ( 34) To suspend cable baskets with wire diameter up to (6mm)* an be used to suspend multi-tier cable basket configurations * Per cable basket manufacturer recommendations D 5:1 Safety rating Product code Max. SWL (lbs) RKET-VSM 3 1/8" 4 5/8" 30 RKET-VFM 2 9/16" 3 7/8" 30 5:1 Safety rating Product code D 6 1 3/8" 1 3/8" coustic Panel Spring nchor Ideal for use with the Standard Hanger, ngel Hook or Express Hanger No tools required for installation S-S for panels up to 40mm in depth (1 9/16") S-L for panels up to 70mm in depth (2 3/4") Maximum load ratings will vary. ontact Gripple Technical Services for more information Product ode S-S 5/8" 1 7/8" 1" S-L 1 1/16" 3 7/8" 2 7/8"

39 Trapeze ccessories Tools & Finishing ccessories Trapeze No. 2 & 3 ombine Trapeze as an accessory with any Trapeze kit for multi-tiered installations. Load rating of 100 or 200 lbs with a 5:1 safety factor Product code: TZ2-10 TRPEZE-NO3 able utters Hardened, durable jaws Two sizes available pocket size for use up to 1/8" diameter cable, or large, providing greater leverage for up to diameter cable Product code: UTTER-GRIPPLE UTTER-6MM Release Keys Use for adjusting or releasing the Standard fastener (pre-load) Two sizes available for Gripple hangers No.1- No.3 and Gripple hangers No.4, No.5 and able Strut kits. For D3 and D6 use No.1 - No.3 adjustment key. Product code: KEY-FLG (for sizes No.1 to No.3) KEY-HF45-LK (for sizes No.4, No.5 and able Strut) Trapeze Plus No. 2, 3 & 4 ombine Trapeze Plus as an accessory with any Trapeze kit for multi-tiered installations. Load rating of 100 lbs lbs with a 3:1 safety factor. Product code: MTZ2-10-IN MTZ3-10-IN MTZ4-10-IN Drop-In nchor Setting Punch Leaves four permanent indents on the anchor to advise correct installation Ergonomic handle with hand protection Two sizes available to suit & 3/8" anchor Product code: MN-PUNH-1/4 MN-PUNH-3/8 Protective Sleeving Protective black tubing to prevent contact between dissimilar metals or for aesthetic enhancement Ideal for use on & No.3 cable Product code: SLEEVE-2MM-FT SLEEVE-3MM-FT utterfly Trapeze Ideal for use with light ductwork. ombine utterfly Trapeze as an accessory with any Trapeze kit for multi-tiered installations. Maximum load rating of 100 lbs with a 5:1 safety factor. Product code: T2-10 Duct Trapeze Ideal for use with rectangular ductwork. ombine Duct Trapeze as an accessory with any Trapeze kit for multi-tiered installations. Maximum load rating of 100 lbs with a 5:1 safety factor. Product code: DT2- Wire nchor Tool Tool securely fits onto the wire anchor to hammer into place Product code: WIRE-NHOR-TOOL Tensioning Tool pplies tension easily with the 6:1 gear drive mechanism Designed control mechanism to prevent over tensioning ompact, easy to handle, operate and carry For use with able Strut kits Product code: TOOL-5-4X-IN orner Saddle Twister right angled reinforced molding to prevent cable friction on rectangular ducting For use with No. 1-3 cable hanger Keeps tail wires neat and tidy Grey aesthetic finish - blends into background For use with and No.3 cable Product code: ORNER-SDDLE Product code: TWISTER

40 Technical 80 Hanging at ngles 82 able onstruction & ross Sections 82 Ductwork Hanger Data 83 Pipe Support Spacing Data 84 Usage Recommendations 85 Quality & pprovals 85 TEHNIL Technical Services

41 Overview of Technical Services Department apabilities Gripple is a manufacturer of able Hanger and racing Solutions for all types of suspended services, with our North merican headquarters located in urora, Illinois, and other locations around the world in the UK, Europe, and India. Gripple s Technical Services Department is comprised of a dedicated and detail-oriented team of specialists who offer their technical services free of charge to contractors to assist in the bidding process. Simply put, Gripple s Technical Services Department reviews the contractor s drawings and provides the contractor with the recommended Gripple able Hanger or racing products and quantities for their project. HV, Mechanical, Electrical, and MTO s (Material Take Offs) Gripple offers a variety of able Hanger products for suspending all types of HV, Mechanical, Piping, and Electrical services. No matter the service being suspended, or the type of structure you re suspending from, Gripple has a solution. y deciding to benefit from our complimentary Take Off services, the following process ensures that with little effort, your full project can be prepared for bidding: 1. Engineer/ontractor submits project drawings to your Gripple Territory Manager 2. Gripple Technical Team marks up the drawings with exact requirements (hanger type, spacings and quantity) for all services* 3. Gripple Technical Team generates concise ill of Materials, and a no obligation quote is provided 4. Once order is placed, product is packaged and labelled to specific project requirements (e.g. Level Two, Zone One, Ductwork) to ensure ease of identification and use on-site 5. Product is dispatched to the job site, and installed accordingly by contractor In addition to the above, your local Gripple Territory Manager can also provide supporting product submittal information and site visits upon commencement of the project. * We provide our Take Off service for any and all required services on a project basis. T able Strut Take Offs Gripple able Strut Kits create secure, overhead spans by running high strength cables horizontally between two attachment points. -lip then twists and locks onto any point along the cable, offering a suspension point for a Gripple able Hanger, and giving complete control of horizontal and vertical positioning of the service being suspended. Installed substantially faster and adjusted considerably easier, able Strut systems can be used to hang all types of services in places that would otherwise be impossible. The Gripple Technical Team can offer assistance and recommendations for installations being suspended on able Strut with regard to: Locations and length of the able Strut runs Safe Working Loads of the able Strut runs Intermediate support points Number of -lip Hangers that can be accommodated Expected sag ontact your Gripple Territory Manager regarding Take Off services for your project! Seismic racing for Nonstructural uilding omponents Gripple provides Seismic Risk Management. We take the liability issues away from you by providing a complete seismic solution the risk management you need that encompasses beginning-to-end Engineering services, as well as a full line of Seismic racing and Vibration Management products for use in seismic zones or T/FP (nti-terrorism/force Protection) situations. The complex and technical nature of seismic bracing requirements, industry regulations, and life-safety issues necessitates a partner like Gripple. We begin by providing you with the following: omplimentary udget Estimating an all-inclusive estimate you can work into your budget that includes (where applicable) Seismic able racing, Vibration Management products, and Engineering Services. Should you move ahead with Gripple on your seismic bracing project, we offer you the following Engineering services for an additional fee: PE Stamped Drawings - noting the proper location of Gripple Seismic able racing and Vibration Management products, per the scope of the project. IM Modeling and lash Detection - provided as required by design scope. Includes 2D, 3D, utod, and/or REVIT. oordination and Site Reviews - with Structural Engineer and Gripple to ensure proper installation of Gripple products