GRILLES. Adjustable Blade Grilles Fixed Blade Grilles Door Grilles Floor Grilles Aircell Polymer Range

Transcription

1 GRILLES Adjustable Blade Grilles Fied Blade Grilles Door Grilles Floor Grilles Aircell Polymer Range

2 Why Waterloo Reliability To reliably give your client the service and support they epect, you need confidence that your suppliers will compliment and support your own professionalism. Waterloo s World Class attitudes and beliefs provide this confidence. World-Class is not a reflection of size or number of employees, it is to do with values such as fleibility, innovation, customer service, integrity, strength of character and good humour. These are the values that separate the outstanding from the ordinary. Innovation Some projects are common place, but as the possibilities of building design are pushed to wider and wider boundaries you need to continually search for technically and cost effective solutions to give satisfaction to your client. Waterloo is committed to constant innovation to provide you with those solutions. We at Waterloo challenge accepted knowledge and use our understanding and learning to sustain our reputation for technical ecellence and continually develop one of the widest ranges of air terminal devices in the world. For over 0 years Waterloo have actively pioneered the use of innovative manufacturing techniques, an approach that is still integral to the way we work today. Quick Delivery When you are working on fast track projects (or just dealing with unepected site requirements) you need confidence that your supplier understands and can respond with the required urgency. To give you complete support, Waterloo obsessively maintains high delivery and quality performance. Waterloo has a well justified reputation throughout the construction industry for very quick service when others might offer four or si weeks delivery periods, Waterloo prides itself in delivering most small and medium orders in five (yes, five) days. Fleibility In an ideal world all projects would commence with the entire design complete and documented. Until then, to give your client maimum confidence and satisfaction, Waterloo s renowned fleibility is at your service. Unanticipated design issues or site conditions might require comple but timely solutions to eceptional problems. Waterloo s fleibility is founded on our wealth of eperience, the fluency and knowledge of our highly-skilled staff and our willingness to eplore new ways of working, and our desire to share with you the benefits of our epertise in construction, design, management, planning, procurement and programming. Specials as Standard Architectural design is continually developing and the tasks of interpreting the requirements and providing cost effective and practical solutions become more important. Waterloo s complimentary made-to-order programme and fluency with the design and manufacture of bespoke air terminal devices will allow you to realise your vision or solve unanticipated problems on site. Symbols Used T Maimum Throw (for air velocity of 0.1 m/s) in occupied zone in isothermal conditions (unless otherwise stated) [m] v t Terminal Velocity [m/s] v Air Velocity mm from the grille face [m/s] L WA dba level is based on a room absorption of 8 db for sound power ref -1 W q v Air Volume [l/s] or [m3/h] P s Static Pressure [Pa] W Width [mm] H Height [mm] Tel: +44 (0)16 710

3 GRILLES Adjustable Blade Grilles Contents 3 1H, 1V, H, V Single and Double Deflection Grilles 4 1HM, 1VM, HM, VM Lever-operated Adjustable Blade Grilles 1KH, 1KV, KH, KV Heavy Duty Adjustable Blade Grilles 6 1RV, RV Adjustable Duct Grilles 7 RTC, RTC, RRTC Reversible Core Grilles 8 Fied Blade Grilles 3HF, 3HG, 3HJ, GC, PER Ehaust Grilles 1 SG1, SG, SG3 Security Grilles 13 ALN, ALM, ALF, ALG, ALJ Airline Linear Grilles 14 APF, APG, APJ, APN, APM Plasterline Linear Grilles 18 UC / UF / UE Urban Grilles 19 Door / Sidewall Grilles NS, DV, NSNL Air Transfer Grilles DSR, DSRX Acoustic Air Transfer Grilles 1 WPT Sidewall Grilles WFV, WFVG Fire Rated Air Transfer Grilles 3 Floor Grilles AFG Ehaust Grilles 4 HDFG Heavy Duty Floor Grille - Tile Replacement HDFG-L Heavy Duty Floor Grilles - Linear 6 Aircell Polymer Grilles Aircell S, D, G, A, T, E Aircell Polymer Grilles 8 Aircell N, Aircell GO Neck Reducers, Opposed Blade Dampers OBSS Damper for E600 Aluminium Opposed Blade Damper for E600 Technical Information PBG, FDC, FDQ, OBCO, OBSS Grille Plenum Chambers, Plenum Control Options 31 Fiing Options 3 Standard Frames, Grille Nominal Sizes, DT-M - Duct Fitted 33 Grille Fiing Selection, Removable Cores 34 Control Options 3 OBSS Opposed Blade Damper (Volume Control Damper) 3 ED Equalising Dampers (Directional Blades Incapable of Shut Off) 3 Technical Information, Basis of Throw 36 Tel: +44 (0)16 710

4 Adjustable Blade Grilles 1H 1V H V OBSS ED Features BSSBD - 19 Free Area 70 (Open) - 19 s 86 (Open) 4 Sub Frames L L P s P Selection Criteria s s s s ORDER EXAMPLE Border Fiing AIR FLOW RATE (l/s) Throw (m) (Vt = 0.4 m/s) 0 Deflection Deflection Deflection 49 4 dba 49 4 Velocity (m/s) on grille face Pivot Line Static Pressure Ps (Pa) Terminal Velocity Correction Factors V t (m/s) Throw multiplier 4 Deflection 0 Deflection 0 Deflection 4 Deflection NOMINAL WIDTH (mm) PIVOT LINE NOMINAL HEIGHT (mm) Tel: +44 (0)16 710

5 Others Features Overall = nominal width + 31 Selection 1HM All others 1HM 1VM VM HM 3HG/M 3HJ/M 3HF/M 1VM Overall = nominal height + 31 HM VM 3 Fully Open 38 Open 8 Open ALN/M ALM/M ALG/M ALJ/M ALG/M ALJ/M ALF/M Fiing Borders 13 3 ORDER EXAMPLE Screw fi (SF) only 9 Type 1HM, 1VM 9 All other types Tel: +44 (0)16 710

6 1KH 1KV KH KV OBSS SF Features blade rattle Fiing Selection Criteria P s P s s ORDER EXAMPLE AIR FLOW RATE (l/s) Tel: +44 (0) l/s Stack size = Nominal duct size - 8 Nominal duct & grille size Nominal duct & grille size 1.7 Throw (m) (Vt = 0. m/s) 0 Deflection 4 Deflection Blades open Optional Opposed Blade Damper 6 t dba addition 7 4 P s dba Level 0 Deflection 4 Deflection Pivot Line Smallest Grille Dimension Static Pressure Ps (Pa) 0 Deflection 4 Deflection Overall height = Nominal Overall width = Nominal + 7 t C C C C Heating Throw Correction Factor NOMINAL WIDTH (mm) PIVOT LINE NOMINAL HEIGHT (mm)

7 Adjustable Duct Grilles 1RV RV OBSS Adjustable duct turns Features Adjustable blades Fiing A Eº ØD F - A Eº F ØD - 7 W H Eº A F Selection Criteria TOTAL AIR FLOW RATE (l/s) THROW (m) V t = 0.4 m/s 0º 4º 0 40 VELOCITY (m/s) on grille face dba 0º 4º 0º STATIC PRESSURE LOSS P s (Pa) 0º 4º NOMINAL WIDTH (mm) 3 4 NOMINAL HEIGHT (mm) 7 ORDER EXAMPLE Free Area Duct Diameter Fiing PIVOT LINE PIVOT LINE Tel: +44 (0)16 710

8 Reversible Core Grilles (R)RTC / (R)RTC Waterloo's reversible core grilles have been designed for commercial projects requiring aesthetically attractive grilles but with a superior performance. The specially designed close pitch vanes produce high levels of induction and miing with ambient air resulting in more even air diffusion in the occupied zone. The core is removable and may be rotated or reversed to provide either or 1 deflection upwards or downwards; in addition the core can easily be cleaned before replacing in the frame. Alternatively any of the Ehaust grille's or Airline Linear grille's cores may be specified. Product Description RTC Reversible core grille RTC Reversible core grille with rear vertical blades RRTC Same as RTC grille with frame suitable for round ducts RRTC Same as RTC grille with frame suitable for round ducts RTC(C) Reversible core only (no frame) OBSS Allen key operated opposed blade damper DT-MG Adjustable Air Turn (fied on grille) DT-M Adjustable Air Turn (fied in duct) Features Turbulator vanes provide high induction and miing with room air Core removable for access and cleaning One core provides or 1 deflection, up or down Rear set of vanes available as an option for horizontal spread/deflection control Available in 6mm or 1mm blade pitch Finishes PPG90 (RAL 90 Gloss - 80% Gloss White) PPM90 (RAL 90 Matt - % Gloss White) PPM9006 (RAL 9006 Matt - % Gloss Silver) Other colours or anodised finish available on request (Anodised finish unavailable on ()RRTC) Weights R(R)TC R(R)TC OBSS/ED DTM(G) Sizes Minimum Size mm Maimum Size mm 14 kg/m face area 18.0 kg/m face area 9. kg/m face area 9.0 kg/m face area Border Types 1 RTC(C)-6 RTC A Eº 1 RTC(C)-1 ØD F RRTC-6 For sizes E and F see 1RV/RV RTC-6 RRTC-6 RTCC-6 RTC-6 RRTC-6 Free Area RTC-1 RRTC-1 RTCC-1 RTC-1 RRTC-1 74% 66% 87% 79% R R16 R16-4 Fiings STS RCCF SF only for ()RRTC BSSBD BSSBP Order Eample RTC-6/00//PPM90/R16/RCCF/OBSS Type Nominal Width Nominal Height Finish Border Fiing Options R16 + STS R + STS R STS R16 + RCCF Tel: +44 (0)16 710

9 Note! m P s L P s L P s 4 6 L P s 4 L P s L P s 7 6 L P s 6 L P s 6 L P s 7 L P s L P s L 6 4 P s 4 6 L 7 P s L P s L 44 Tel: +44 (0)16 710

10 m 4 P s 4 6 L P s 6 L P s L P s 4 4 L P s 4 6 L P s 7 L 6 7 P s L 7 P s 6 L Correction Factors Ceiling m P s L P s L P s 4 6 L P s 4 L Correction Factors Ceiling P s L P s 7 6 L P s 6 L P s 6 L 6 7 P s 7 L 4 P s 4 L P s L Tel: +44 (0)16 710

11 m P s L P s L P s 4 6 L P s L P s L P s 6 7 L P s 7 L 4 - P s 6 L P s 6 L 6 P s 7 L 4 P s L m P s L - - P s L P s L P s 7 6 L P s 6 L P s 6 L P s 7 L P s L P s 4 6 L 4 P s 4 6 L 7 P s 4 L P s L 44 Correction Factors Ceiling Correction Factors Ceiling Tel: +44 (0)16 710

12 Ehaust Grilles 3HG / 3HJ / 3HF / GC / PER The Waterloo 3 Series vane grilles, GC eggcrate and PER mesh grilles have been designed to satisfy all ehaust applications in H & V systems. The various cores may be selected to satisfy both engineering and architectural requirements. Cores are constructed from aluminium etrusions supported on integral aluminium tubes; mesh cores are perforated aluminium sheet. The frames are constructed from aluminium etrusions which are mitred and welded or cleated. Product Description 3HG 0 fied blade grille 3HJ 1 fied blade grille 3HG 3HJ 3HF 3HF 4 fied blade grille GC eggcrate grille 7 GC-RCG Removable core grille (GC) (C) Core only PER Perforated plate grille RB Reverse border OBSS Allen key operated opposed blade damper. If used with RCG, OBSS is mounted in duct or plenum. ED Equalising deflector Weights Series 3 7 kg/m face area GC kg/m face area GC-RCG 6. kg/m face area OBSS/ED 9. kg/m face area PER 6.0 kg/m face area Filter 7 7 retaining clip Filter - - Overall Flange. Nom dba (L p ) and Static Pressure (P s ) Correction Factors for Grilles with an Open Damper PER PER with Filter clip GC GC-RCG GC(C) Grille Width >00 L w Addition (C L ) P s Multiplier (C P ) Sizes Minimum Size Maimum Size (Maimum GC any 00) Maimum GC-RCG Fiing Options SF CF CRB VS AFVS PFVS RCHS AFHS AFCF RCCF BSSBD BSSBP GC-RCG Finishes PPG90 (RAL 90 Gloss - 80% Gloss White) PPM90 (RAL 90 Matt - % Gloss White) PPM9006 (RAL 9006 Matt - % Gloss Silver) Other colours or anodised finish available on request GC/(C) Core is mill finished as standard Selection Eample 00/ Grille Handling 600 l/s 3HJ grille Noise level = 3 dba P s = 11 Pa PER grille Noise level = 3 dba P s = Pa 3HJ with open damper Noise level = 37 dba P s = 17 Pa PER with open damper Noise level = 40 dba P s = 31 Pa Order Eample Type Nominal Width Nominal Height Finish Border Fiing Options 3HG///PPM90/R/SF/OBSS Free Area 3HG 3HJ 3HF GC GC-RCG PER 84% 84% 4% 91% 83% 1% Performance Nomogram AIR FLOW RATE (l/s) HG 3HJ Velocity (m/s) mm from grille face dba Pressure Loss Level P s(pa) PER 3HF GC GC/RCG Pivot Line 3HF PER 3HG 3HJ Pivot Line 0 0 GC GC/RCG 0 0 Please refer to pages for full details of: Fiing Options Control Options Sub Frames Sizing Implications Border Options NOMINAL WIDTH (mm) PIVOT LINE NOMINAL HEIGHT (mm) Tel: +44 (0)16 710

13 Security Grilles SG1 SG SG3 OBSS PB Plenum Bo Features Fiing H + 0 H W + 0 W W + 0 W H H K Wall thickness K + 80 K Wall thickness K SG3 H W H Selection Criteria Free Area Plenum bo ORDER EXAMPLE Control AIR FLOW RATE l/s Jet throw (m) Vt=0.m/s DUCT AIR VELOCITY (m/s) Pivot Line NOISE LEVEL dba W STATIC PRESSURE LOSS (Pa) EXHAUST SUPPLY NOMINAL GRILLE SIZE WIDTH HEIGHT (mm) (mm) 0 Pivot Line Free Area (m ) Tel: +44 (0)16 710

14 OBSS 1. H + 1 H - H 7 Grilles Airline Linear Grilles ALN / ALM / ALF / ALG / ALJ Waterloo Airline Linear grilles have been designed to satisfy air diffusion and engineering requirements as well as architectural specifications. Airline grilles may be used in modular or continuous (ALN, ALM) situations for ceiling, sidewall, cill or bulkhead applications. The range is available with a wide variety of special options and fabrications to suit most project requirements. Grilles may be supplied with or without frames and borders - cores are represented with a suffi (C). Product Description ALN 0 6mm thick blade, 1.mm pitch ALM 1 6mm thick blade, 1.mm pitch ALF 4 4.mm thick blade, 1.mm pitch ALG 0 3mm thick blade, 1.mm pitch ALJ 1 3mm thick blade, 1.mm pitch ALG 0 3mm thick blade, mm pitch ALJ 1 3mm thick blade, mm pitch ALG() As above with a rear set of adjustable blades ALJ() As above with a rear set of adjustable blades ALN() As above with a rear set of adjustable blades ALM() As above with a rear set of adjustable blades ALF way cores are available on angled blade designs (Suffi M, F or J) AFG 3mm border frame (any blade can be specified) OBSS Allen Key operated opposed blade damper ED Equalising deflector DT-M Adjustable duct turn (Installed in duct) ALF-RB Reverse Border (Any blade can be specified) Finishes PPG90 (RAL 90 Gloss - 80% Gloss White) PPM90 (RAL 90 Matt - % Gloss White) PPM9006 (RAL 9006 Matt - % Gloss Silver) Other colours or anodised finish available on request Weights ALG 14 kg/m face area Others kg/m face area OBSS/ED 9. kg/m face area DTM(G) 9.0 kg/m face area Sizes Minimum size - 7mm Maimum sizes for ALG / ALJ / ALF mm Maimum sizes for ALN / ALM - any 0mm Maimum single section of cores mm Refer to head office for borders up to 4 meters in one piece Continuous grilles are supplied in sections for butt jointing on site. Fiing Options SF CF CRB VS AFVS PFVS RCHS AFHS AFCF RCCF BSSBD BSSBP The following fiings are not compatible with the ALF blade CRB RCHS AFHS BSSBD BSSBP - Not suitable for grilles with a rear blade or ALF blade BSSBD - recommended for AFG frame if wall mounted (plasterboard) ALF ALG ALG() ALF-RB ALM ALM() - ALF(C) ALF() ALN ALN() - 1. ALF Special way cores are available for all angled blade, i.e. ALF as shown. ALJ 43 ALJ() Free Area Type Pitch ALG ALJ ALF ALM ALN mm 68% 68% 1.mm 74% 74% 44% 49% 49% Order Eample ALG/00//PPM90/R/SF/OBSS Type Nominal Width Nominal Height Finish Border Fiing Options Curved ALG Grille (OBSS open) AFG frame shown with ALN blade + OBSS (Open) ALF() + OBSS Tel: +44 (0)16 710

15 Airline Linear Grilles AIR FLOW RATE (l/s/m) THROW (m) 40 dba LEVEL 4 3 VELOCITY (m/s) mm from grille face pivot line STATIC PRESSURE LOSS (Pa) 0 0 KEY ALN ALM ALG ALJ ALG ALJ NOMINAL HEIGHT(mm) Selection Criteria ALG P s ALG P s ALG /OBSS P s ALG/OBSS P s throw SILL Correction Factors L - 6 t ALF P s P s ALF/OBSS P s P s mm ma throw SIDE WALL 0 Notes AIR FLOW RATE (l/s/m) dba LEVEL ALG ALG ALJ ALJ ALN ALM Pivot line s VELOCITY (m/s) mm from grille face Pivot line STATIC PRESSURE LOSS (Pa) ALF ALF ALN ALM ALG ALJ ALG ALJ 1 1 NOMINAL HEIGHT (mm) Tel: +44 (0)16 710

16 Airline Linear Grilles Radius B A Radius B A C C Tel: +44 (0)16 710

17 Airline Linear Grilles A B Radius C A Radius B C A C Radius B Tel: +44 (0)16 710

18 Plasterline Linear Grilles APN / APM / APG / APJ / APF Waterloo Plasterline Linear Grilles have been designed to satisfy air diffusion and engineering requirements while providing a narrow plaster-in border to meet architectural specifications. Plasterline grilles may be used in modular or continuous situations for sidewall, cill or bulkhead applications. The range is available with a wide variety of special options and fabrications to suit most project requirements. Ceiling applications can be achieved with the use of a non stdard fied core version. Product Description anapn 0 6mm thick blade, 1.mm pitch APN ALN with rear set of adjustable blades APM 1 6mm thick blade, 1.mm pitch APM ALM with rear set of adjustable blades APM ALM with way core APG 0 3mm thick blade, 1.mm pitch APG ALG with rear set of adjustable blades APG ALG with mm pitch blades APJ 1 3mm thick blade, 1.mm pitch APJ ALJ with rear set of adjustable blades APJ ALJ with way core APJ ALJ with mm pitch blades APF 4 mm thick blade, 1.mm pitch APF ALF with way core ED Equalising deflector OBSS Allen Key operated opposed blade damper Finishes PPG90 (RAL 90 Gloss - 80% Gloss White) PPM90 (RAL 90 Matt - % Gloss White) PPM9006 (RAL 9006 Matt - % Gloss Silver) Other colours or anodised finish available on request Sizes Because of their nature, the sizing for Plasterline grilles is eceptional in that measurements are for the internal opening at the front face. Opening cut-out in the substrate should be 1 more than the stated grille size. Minimum size: wide 0 high Maimum size: 00 wide 00 high Continuous grilles can be supplied in sections for butt joining on site. Refer to Head Office for widths up to 0 in one piece. Free Area Type Pitch APG APJ APF APM APN mm 68% 68% mm 74% 74% 44% 49% 49% Nominal Nominal Nominal + 6 Nominal Nominal + 6 Nominal APN APM APG Nominal + 6 Nominal Nominal + 6 Nominal Nominal + 6 Nominal + 6 APJ APF APF Special way cores are available for all angled blade configurations, i.e. APF as shown. Order Eample APG/00//PPM90/OBSS Type Inside Width Inside Height Finish Options Tel: +44 (0)16 710

19 Urban Grilles UC / UF / UE The Waterloo Urban Grille range has been designed with the industrial design aesthetic in mind, allowing for eposed duct work to become a feature of the building. Product Description 1- Urban Curve Curved to match oval or circular ducting. Available with varying angled blades to give different throws to suit the installation requirements. For side fitting to radiused face of duct. 19 UCG 0 3mm thick blade, 1.mm pitch UCJ 1 3mm thick blade, 1.mm pitch UCN 0 6mm thick blade, 1.mm pitch UCM 1 6mm thick blade, 1.mm pitch UCF 4 mm thick blade, 1.mm pitch UCA Adjustable horizontal or vertical blade (note: core is flat and not curved) Options RAB Adjustable blades horizontal or vertical (Flat core) - Urban Flat A flat grille to suit vertical throw when installed on the underside of ducting. For flat face of duct. Blades parallel with centre-line of duct (See Airline Grilles for sizing, performance details and construction) Urban Curve Radius Height Urban End 1. Depth UFG 0 3mm thick blade, 1.mm pitch UFJ 1 3mm thick blade, 1.mm pitch UFN 0 6mm thick blade, 1.mm pitch UFM 1 6mm thick blade, 1.mm pitch UFF 4 mm thick blade, 1.mm pitch UFJ way 1 3mm thick blade, 1.mm pitch UFF way 4 mm thick blade, 1.mm pitch UFM way 4 6mm thick blade, 1.mm pitch Options mm blade pitch available with 3mm blades 3- Urban End Designed to fit into the vertical end of flat oval duct or round. Blades are available in various angles to suit the throw characteristics required from the installation. UEG 0 3mm thick blade, 1.mm pitch UEJ 1 3mm thick blade, 1.mm pitch UEN 0 6mm thick blade, 1.mm pitch UEM 1 6mm thick blade, 1.mm pitch UEF 4 mm thick blade, 1.mm pitch Options HB Horizontal blades VB Vertical blades Features The grilles are left in their raw finish to complement the popular Urban style which includes eposed duct work. Urban grilles are available is 3 styles which allows for installation into any air distribution design. Finishes Raw unfinished. Order Eample UCG/3//R/SF/OBSS Type Nominal Width Duct size Border Fiing Options Standard ISO R duct size range Free Area Tel: +44 (0) Pitch UCG UFG UEG UCJ UFJ UEJ UCN UFN UEN UCM UFM UEM UCF UFF UEF 1.mm 74% 74% 44% 49% 49% Flat oval duct sizing Height of duct mm Dim B Width of duct mm (Dim A) Dim A = Width Notes: Urban end grilles are built to suit standard duct dimensions but are available to fit any width requested. Dim B = Height

20 DV DVA NS Features Fiings SF Selection Criteria P s DV P s P s Free Area ORDER EXAMPLE AIR FLOW RATE (l/s) NSNL NSA NSNLA dba STATIC PRESSURE LEVEL LOSS P s (Pa) NSNL NS NS DV NSNL DV Pivot line 0. Pivot line NOMINAL GRILLES WIDTH (mm) NSC NSNLC PIVOT LINE NOMINAL GRILLES HEIGHT (mm) 0 0 Border Fiing Tel: +44 (0)16 710

21 DSR DSRX DSR Features Easy to install Easy to clean Min 40 7 * Variable Ma 0 Nominal W H + 1 Nominal W H DSR Nominal W H 14 Minimum DSR Selection Criteria AIR FLOW RATE (l/s) TRANSMISSION LOSS (db) 1 63 REGENERATED NOISE dba TRANSMISSION LOSS DSR K K 4K 8K FREQUENCY (Hz) PRESSURE LOSS Ps (Pa) DSR DSR DSRX DSR & DSRX NOMINAL DUCT WIDTH (mm) 3 4 Pivot Line NOMINAL DUCT HEIGHT (mm) Free Area ORDER EXAMPLE Pivot Line Tel: +44 (0)16 710

22 Features Selection Criteria Free Area ORDER EXAMPLE W - W + W + 3 W - W + 4 P s L P s L P s L P s 6 L P s 6 7 L P s L P s L P s 6 L Tel: +44 (0)16 710

23 Singular steel grille only Features Easy to install grilles Installation Selection Criteria Q ORDER EXAMPLE P Tel: +44 (0) H - O/A Nominal size = Opening size Beading W H P = Differential Pressure (Pa) P = Differential Pressure (Pa) W - O/A Overall Size Pitch (Appro) 6mm Louvre 40 Overall Size Free Area 0 WFV dBA dba dba 40dBA Q = Air Flow Rate (l/s) 0 WFVG dBA 40dBA 3dBA dba dba WFG Q = Air Flow Rate (l/s)

24 AFG AFG OBSS ED PBLG Plenum Bo Features Solid etruded blades Nylon Decanol Selection Criteria P s Free Area ORDER EXAMPLE H Tel: +44 (0) OBSS AIR FLOW RATE (l/s/m) THROW (m) (V t= 0. m/s) H - 7 H (OBSS open) 4 W W - 7 W t dba addition Point load 4 VELOCITY (m/s) mm from grille face dba LEVEL Pivot Line STATIC PRESSURE LOSS (Pa) Throw NOMINAL DUCT HEIGHT (mm)

25 HDFG HDFG OBSS BL Features Including OBSS Damper 7 Including Hit & Miss Damper Min. Pedestal Head Free Area ORDER EXAMPLE HDFG No Tel: +44 (0) OBSS (Optional) P s 4 L P s 4 6 L P s 6 L P s L 7 - P s - L P s L

26 HDFG-L Linear OBSS BL Features Recessed border style L 6 1. Single unit L W End section L Intermediate section W 8 Free Area W - 40 ORDER EXAMPLE Tel: +44 (0)16 710

27 HDFG-L 7 - HDFG-L Etract m P s L P s 4 6 L P s 7 4 L 7 P s 4 6 L P s 6 4 L 44 P s L 7 6 P s 6 4 L 44 6 P s 7 4 L 7 P s 4 6 L 4 P s 4 6 L 7 P s L 7 P s 7 L 44 4 P s 47 L 4 HDFG-L - Linear Corner Sections 1 0 Angle W ORDER EXAMPLE Corner Angle Tel: +44 (0)16 710

28 Aircell Polymer Grilles Aircell SAircell D Aircell G Aircell A Aircell T Aircell E Aircell - S Aircell S Aircell D Aircell G Aircell A Aircell S 46. Aircell D min.40 Aircell G 46. Aircell T Aircell E GO OBSS Features Fiing Aircell A Aircell G Etract Aircell E P s L P s L Aircell - D S D G A E N ORDER EXAMPLE W H P s L P s L 4 P s L 6 P s L P s 4 L P s 7 L 44 Tel: +44 (0)16 710

29 Aircell Polymer Grilles t Aircell - G Aircell - A Aircell E Etract dba addition P s L P s L P s L P s 6 L P s L P s 7 6 L P s 4 L P s 74 L P s 4 L P s L Aircell S Aircell D P s L P s L P s 6 L P s 6 L 46 6 P s L P s L 4 P s 66 7 L 47 P s L P s L 7 P s L P s L 44 Tel: +44 (0)16 710

30 Aircell Polymer Grilles Aircell A Etract P s 4 L 6 P s 6 L P s 4 L 47 Selection Criteria Aircell - E P s L 44 P s L 44 P s L Aircell T Free Area S - D - G - A - - E ØD (Ø31 / Ø) Grille W H Waterloo 6 47 Accessories ød - 8

31 Spigot Diameter Grilles Grille Plenum Chambers Correct selection and sizing of distribution plenum chambers is critical because grille air resistance is very low relative to the distribution ductwork resistance. It is therefore recommended that whenever possible grilles are served by low velocity stub ducts from branch ducting systems fitted with correct balancing controls. Where it is necessary to specify and use grille plenums a generous allowance for commissioned noise generation should be made. Product Description PBG Individual grille plenum PBG/LL Low line grille plenum NRG Neck reducer PBLG Linear grille plenum PBLG/LL Low line linear grille plenum PBSG Security grille plenum Spigot Options SE Side Entry TE Top Entry 1CC 1- Circular Connection 1RC 1- Rectangular/Square Connection 1FO 1- Flat Oval Connection Features Plated steel with stitched seam joints. Standard circular connection diameters: 97, 1, 17, 197, 47, 31 and 397 Ø Available with circular, square,rectangular or flat oval spigots in either top or side entry applications Standard or Low-line configurations Optional 6mm internal thermal/acoustic lining H H W W D 0 L 31 PBLG/LL - Top entry Low-line linear grille plenum bo. PBG - Side entry grille plenum bo 3 H H W W 0 PBLG - Side entry Linear grille plenum bo. NRG - Neck Reducer Control Options FDC Cord operated flap damper for mounting within circular spigots to plenum chambers. The cord should be fed through the air terminal device ready for commissioning. Finish PBG/NRG Galvanised sheet steel Dimensions Length Width Height Order FDQ Flap damper with eternal quadrant control for mounting within circular spigots to plenum chambers. The quadrant is accessible from outside the duct and the damper can be locked in any position. Etract Grille length Etract Grille width SE Spigot diameter or height + 0mm as standard TE as specified by customer (0mm minimum recommended) When ordering plenum chambers please specify length, width & height, spigot size and position (Top or Side Entry) and control options. Please note that the plenum height should in general be 0mm greater that the spigot diameter (Side Entry applications). OBCO Cord operated opposed blade damper for installation within square or rectangular spigots to plenum chambers. The cord should be fed through the air terminal device ready for commissioning. Order Eample OBSS / ED Standard opposed blade damper for diffuser or duct mounting. Adjustable by screwdriver inside the duct or through the face of the air terminal device. The ED is an individually adjustable blade device for equalising airflow across the diffuser. PBG/70/70//1CC/SE/97dia/BLACK Type Plenum Chamber Length Plenum Chamber Width Plenum Chamber Height Spigot Number / Shape Entry Spigot Size Option Tel: +44 (0)16 710

32 Controls and Fiing Options Fiing Options H H - 1. H Frame: R16 Mounting: RCCF Frame: R / R3 Mounting: SF Frame: R / R3 Mounting: AFCF Frame: R / R3 Mounting: AFHS H - 1 Min. (T3) Min. (T48) 1. H - 0 (T3) 6 (T48) OBSS Min. 40 Ma. º 1. H - Frame: R16 Mounting: RCHS Frame: R16 / R / R3 Mounting: CF Frame: R16 / R / R3 Mounting: CRB BSSBD (R16 / R / R3) Duct / Plasterboard fiing (T3) 3 (T48) 13 (T3) 9 (T48) 1. H - 1. H - 3 (T3) 39 (T48) 1. H - BSSBP (R16 / R / R3) Plenum fiing (-1mm) Frame: R Mounting: AFVS Frame: R Mounting: PFVS Frame: R16 / R /R3 Mounting: VS Tel: +44 (0)16 710

33 33 Standard Frames Standard Frames Sub Frames RC RF AF /48 3/48 3/48 R16 R R3 RCCF RCHS PFVS AFCF AFHS AFVS Overall Grille Sizes Grille with R16 = Nominal W/H + 7mm Grille with R = Nominal W/H + mm Grille with R3 = Nominal W/H + 39mm Grille with RC = Nominal W/H + 39mm Grille with PF = Nominal W/H + 1mm Note: AF and RC subframes can be made to a maimum size of 800mm in any direction in one piece. For sizes above that, we supply in parts for assembly on site by others. DT-M - Duct Fitted The hinged strip is used to calibrate the amount of air desired, by altering the angle of the blades and therefore altering the amount of disruption to the airflow. Sizes for DT-M Width = 0-1 Height = 7-4 Grille Nominal Sizes Nominal + 7 BORDER 16 Nominal - l/s Stack Nominal -.4 O/S Stack Nominal size Correction for Grille + Damper Supply 0 spread dba + P s 1.3 Supply 4 spread dba + P s 1.1 Ehaust dba + P s 1. Nominal + BORDER Nominal - l/s Stack Nominal -.4 O/S Stack Nominal size Nominal + 39 BORDER 3 Nominal - l/s Stack Nominal -.4 O/S Stack Nominal size Tel: +44 (0)16 710

34 34 Grille Fiing Selection Types SF CF CRB VS AFVS PFVS BSSB AFCF AFHS RCCF RCHS 1H / H / 1V / V A/C A A/C A/C A/C A/C A/B/C A A/C A A/C 1KH / KH A/C 1KV / KV A/C 1HM / HM A/C 1VM / VM A/C PER / 3HF A/C A A/C A/C A/C A A GC / 3HG / 3HJ A/C A A/C A/C A/C A/C A/B/C A A/C A A/C ALF / ALF A/C A A/C A/C A/C A A ALN / ALM / ALG / ALJ A/C A A/C A/C A/C A/C A/B/C A A/C A A/C ALG / ALJ A/C A A/C A/C A/C A/C A A/C A A/C ALM / ALN A/C A A/C A/C A/C A/C A A/C A A/C ALM / ALJ / ALG / ALJ A/C A A/C A/C A/C A A A/C NSA / NSB / DVA / DVB A/C DVC / NSC A/C A A/C A/C A/C A A RTC / RTC A/C BORDER STYLES T/3T 16T/T/3T 16T/T/3T 16T/T/3T T/3T T RTC/16T T/3T T/3T T/3T 16T/RTC-R16 16T/RTC-R16 A = SUITABLE FOR DUCTING AND WALL B = SUITABLE FOR PLASTERBOARD C = SUITABLE FOR CEILING Removable Cores Types Removable RCCF RCHS PFVS AV AFCF AFHS RTC RCG - GC Special 1H/H/1V/V Grille B B B N N N PER/GC Grille B B B N N N RCG - GC Core B 3HG/3HJ Grille B B B N N N 3HG/3HJ Core B B 3HF/ALF Grille B B N N 3HF/3HJ Core B B ALN/ALM/ALG/ALJ Grille B B B N N N ALN/ALM/ALG/ALJ Core B B APN/APM/APG/APJ Core ALG/ALJ Grille B B N N ALG/ALJ Core B B NSC/DVC Grille B B N N RTC/RTC Grille B RTC/RTC Core B B = BEADED FRAME N = NON BEADED FRAME RTC = R OR R16 FRAME WITH CORE AND PACKERS SPECIAL = PART FRAME WITH CORE AND BRACKET INCORPORATING TERRY CLIP Note: If OBSS or ED are selected access to the duct work will not be possible. Tel: +44 (0)16 710

35 3 Control Options - Grille Mounted OBSS Opposed Blade Damper (Volume Control Damper) Waterloo OB Opposed Blade Dampers are manufactured to suit virtually the whole of our square / rectangular Air Terminal range and can be fitted to the neck of the terminals or inside plenum bo. They are adjustable from the front of the Grille or Diffuser with a screwdriver as standard, but are also available with cord- or lever-operation. Manufactured with linked aluminium etruded blades, in sizes to suit any Waterloo Grille or Diffuser, they are useful for fine airflow regulation and can be adjusted from fully open to closed low-leakage position. Product Description OBSS OBCO OBSL OBLL BLACK Features Opposed Blade Damper, Screwdriver operated Opposed Blade Damper, Cord operated Opposed Blade Damper, Short Lever operated Opposed Blade Damper, Long Lever operated Painted black to prevent through vision Linked aluminium etrusions for limited etra weight Large choice of adjustments to suit any configuration Can be fitted to virtually any Waterloo Grille or Diffuser Finishes Etruded aluminium blades Sizes Minimum Size Minimum Size for Plasterline Maimum Size - single section mm Multiple sections will be banked to accommodate larger terminal sizes. 43 mm open Order Eample Damper type Options Terminal Length Terminal Width Terminal type OBSS/Black/600/0/For ALN ED Equalising Dampers (Directional Blades Incapable of Shut Off) Waterloo ED Equalising Dampers are manufactured to suit virtually the whole of our square / rectangular Air Terminal range and can be fitted to the neck of the terminals or inside plenum bo. They are individually adjustable to control air direction and may be used for localised blanking. Manufactured with aluminium etruded blades, in sizes to suit any Waterloo Grille or Diffuser, they can be adjusted manually by removing the Grille or Diffuser core. Product Description ED BLACK Features Equalising deflector Painted black to prevent through vision Aluminium etrusions for limited etra weight Individually adjustable for fine airflow regulation Can be fitted to virtually any Waterloo Grille or Diffuser Finishes Etruded aluminium blades Sizes Minimum Size Maimum Size - single section mm Multiple sections will be banked to accommodate larger terminal sizes. 3 mm open Order Eample Damper type Options Terminal Length Terminal Width Terminal type ED/Black/600/0/For A CSF Tel: +44 (0)16 710

36 Technical Information 36 Basis of Throw Unless noted differently on the individual supply grille performance information, all Throw performance data is based on isothermal supply air conditions, to a terminal velocity (v t ), in the centre of the jet, of 0. m/s. See tables below for other conditions. Throw Throw Remark: v t mm ma v t If the distance between grille and ceiling is more than mm, the throw will be reduced by %. Sill Sidewall Jet Temperature Decay Characteristics The following graph indicates the jet residual temperature at various throw distances. Given throw = (m) and supply air differential = To Calculate Ac = Grille Area (m²) Calculate / Ac Enter graph at required value / Ac Eit graph at value T / To Calculate T = To ( T / To) T = Residual temperature differential ( C) Working Eample for Temperature Decay Calculations 1H///R/SF Supply Air Temp = 18 C Room Temp = C To = C Air Volume = 0 l/s From Performance data see page 4 Throw = 8.3 m Ac = 8.3/ ( ) = 39. Therefore = T = 0.37 C and the air temperature at maimum throw (8.3 m) is = 19.6 (19.6) C Throttled Damper Factors T To eg Eample of Throttled Damper Factor Handling Consider a Supply Grille with Damper P S (Grille) = 0 Pa P S (Duct) = Pa PR = TYPICAL GRILLE 40 0 / Ac eg. 39. PR = P ѕ (Grille) / P ѕ (Duct) SUPPLY 1 dba addition EXHAUST dba addition PR = P ѕ (Grille) / P ѕ (Duct) Therefore addition is = 18 dba Assume that we are using the same grille as in the Temperature Decay Calculation (above); From the Performance data on page 8, dba = + 18 = 48 dba Tel: +44 (0)16 710

37 Notes Waterloo Tel: +44 (0)16 710

38 Notes Waterloo Tel: +44 (0)16 710

39 Waterloo Product Range Waterloo Product Range GRILLES DIFFUSERS Waterloo Tel: +44 (0)16 710

40 Waterloo Air Products plc Head Office: Mills Road, Aylesford, Maidstone, Kent ME 7NB Tel: +44 (0) Fa: +44 (0) sales@waterloo.co.uk internet: Northern Office: Hyde Park House, Cartwright Street, Newton, Hyde SK14 4EH Tel: +44 (0) Fa: +44 (0) sales@waterloo.co.uk internet: FM 783 EMS 907 All products conform to the Terms and Conditions of Waterloo Air Products plc a copy of which are available upon request. Due to our continuous research and development programme, Waterloo Air Products plc reserve the right to alter products and prices without prior notification. Copyright Waterloo Air Products plc 18 Waterloo declare that, at the time of print, all products are in accordance with relevant directives, as identified by HEVAC and other European Organisations and will display the CE Marking where required. May 18