Adjustable Duct Grilles

Transcription

1 Adjustable Duct Grilles 1RV Single vertical set of blades 2RV One set vertical, one set of horizontal blades

2 Adjustable Duct Grilles 1RV / 2RV Introduction the side of an exposed circular duct without the need for a provided with either a single row of vertical blades, or a set of vertical blades at the front and a set of horizontal blades at the rear. There are a range of sizes for each grille to suit Product Description 1RV Single vertical set of blades 2RV One set vertical, one set of horizontal blades OBSS DT-2M Adjustable duct turns Features Adjustable blades Suitable for large range of duct sizes Finishes Weights Sizes Fixing Advantages No need for transition piece on ducts Free Area 1RV 2RV A 30 Eº 1RV ØD F Nom. - 2 Nom. 2 2RV W A F A 30 Eº F ØD Nom. - 2 Nom. ORDER EXAMPLE Duct Opening Width Finish Fixing Option Tel: +44 (0)

3 Adjustable Duct Grilles 1RV / 2RV Selection Criteria Noise level is based on grilles sound power Throw is based on a free jet application TOTAL AIR FLOW RATE (l/s) THROW (m) V t = 0.4 m/s 0º 4º VELOCITY (m/s) on grille face dba 0º 4º 0º STATIC PRESSURE LOSS P (Pa) s 0º 4º NOMINAL WIDTH (mm) NOMINAL HEIGHT (mm) PIVOT LINE PIVOT LINE 0 Tel: +44 (0)

4 Controls and Fixing Options Fixing Options H H H H -2 1 Min. (T32) 30 Min. (T48) 12.2 H -2 0 (T32) 6 (T48) OBSS Min. 40 Max. 10º 12.2 H (T32) 3 (T48) 13 (T32) 29 (T48) 12.2 H H (T32) 39 (T48) 12.2 H -2 Tel: +44 (0)

5 RC RF AF /48 32/48 32/48 RCCF PFVS AFCF AFVS Overall Grille Sizes The hinged strip is used to calibrate altering the angle of the blades and Nominal + 7 BORDER 16 Nominal -2 l/s Stack Nominal O/S Stack Nominal size dba + 2 P s dba + 2 P s x 1.1 dba + 2 P s x 1.2 Nominal + 2 BORDER 2 Nominal -2 l/s Stack Nominal O/S Stack Nominal size Nominal + 39 BORDER 32 Nominal -2 l/s Stack Nominal O/S Stack Nominal size Tel: +44 (0)

6 6 Grille Fixing Selection Types SF CF CRB VS AFVS PFVS BSSB AFCF AFHS RCCF RCHS 1H / 2H / 1V / 2V A/C A A/C A/C A/C A/C A/B/C A A/C A A/C 1KH / 2KH A/C 1KV / 2KV A/C 1HM / 2HM A/C 1VM / 2VM A/C PER / 3HF A/C A A/C A/C A/C A A GC / 3HG / 3HJ A/C A A/C A/C A/C A/C A/B/C A A/C A A/C ALF / 2ALF A/C A A/C A/C A/C A A ALN / ALM / ALG / ALJ A/C A A/C A/C A/C A/C A/B/C A A/C A A/C ALG2 / ALJ2 A/C A A/C A/C A/C A/C A A/C A A/C ALM2 / ALN2 A/C A A/C A/C A/C A/C A A/C A A/C 2ALM / 2ALJ / ALG10 / ALJ10 A/C A A/C A/C A/C A A A/C NSA / NSB / DVA / DVB A/C DVC / NSC A/C A A/C A/C A/C A A RTC / 2RTC A/C BORDER STYLES 2T/32T 16T/2T/32T 16T/2T/32T 16T/2T/32T 2T/32T 2T RTC/16T 2T/32T 2T/32T 2T/32T 16T/RTC-R16 16T/RTC-R16 A = SUITABLE FOR DUCTING AND WALL B = SUITABLE FOR PLASTERBOARD C = SUITABLE FOR CEILING Removable Cores Types Removable RCCF RCHS PFVS AV AFCF AFHS RTC RCG - GC Special 1H/2H/1V/2V Grille B B B N N N PER/GC Grille B B B N N N RCG - GC Core B 3HG/3HJ Grille B B B N N N 3HG/3HJ Core B B 3HF/ALF Grille B B N N 3HF/3HJ Core B B ALN/ALM/ALG/ALJ Grille B B B N N N ALN/ALM/ALG/ALJ Core B B APN/APM/APG/APJ Core ALG10/ALJ10 Grille B B N N ALG10/ALJ10 Core B B NSC/DVC Grille B B N N RTC/2RTC Grille B RTC/2RTC Core B B = BEADED FRAME N = NON BEADED FRAME RTC = R OR R16 FRAME WITH CORE AND PACKERS SPECIAL = PART FRAME WITH CORE AND BRACKET INCORPORATING TERRY CLIP Note: If OBSS or ED are selected access to the duct work will not be possible. Tel: +44 (0)

7 7 Control Options - Grille Mounted OBSS Opposed Blade Damper (Volume Control Damper) Introduction Waterloo OB Opposed Blade Dampers are manufactured to suit virtually the whole of our square / rectangular Air Terminal range and can be fitted to the neck of the terminals or inside plenum box. They are adjustable from the front of the Grille or Diffuser with a screwdriver as standard, but are also available with cord- or lever-operation. Manufactured with linked aluminium extruded blades, in sizes to suit any Waterloo Grille or Diffuser, they are useful for fine airflow regulation and can be adjusted from fully open to closed low-leakage position. Product Description 43 mm open OBSS OBCO OBSL OBLL Opposed Blade Damper, Screwdriver operated Opposed Blade Damper, Cord operated Opposed Blade Damper, Short Lever operated Opposed Blade Damper, Long Lever operated BLACK Painted black to prevent through vision Features Linked aluminium extrusions for limited extra weight Large choice of adjustments to suit any configuration Can be fitted to virtually any Waterloo Grille or Diffuser Finishes Extruded aluminium blades Sizes Minimum Size x 7 Minimum Size for Plasterline x 0 Maximum Size - single section 800x600mm Multiple sections will be banked to accommodate larger terminal sizes. Order Example Damper type Options Terminal Length Terminal Width Terminal type OBSS/Black/600/200/For ALN ED Equalising Dampers (Directional Blades Incapable of Shut Off) Introduction Waterloo ED Equalising Dampers are manufactured to suit virtually the whole of our square / rectangular Air Terminal range and can be fitted to the neck of the terminals or inside plenum box. They are individually adjustable to control air direction and may be used for localised blanking. Manufactured with aluminium extruded blades, in sizes to suit any Waterloo Grille or Diffuser, they can be adjusted manually by removing the Grille or Diffuser core. Product Description 3 mm open ED Equalising deflector BLACK Painted black to prevent through vision Features Aluminium extrusions for limited extra weight Individually adjustable for fine airflow regulation Can be fitted to virtually any Waterloo Grille or Diffuser Finishes Extruded aluminium blades Sizes Minimum Size x 0 Maximum Size - single section 800x600mm Multiple sections will be banked to accommodate larger terminal sizes. Order Example Damper type Options Terminal Length Terminal Width Terminal type ED/Black/600/200/For A CSF Tel: +44 (0)

8 Spigot Diameter Introduction Product Description PBG PBG/LL NRG PBLG PBLG/LL PBSG Spigot Options 1CC 1RC 1FO Features Control Options H H W W D 0 L. 3 H H W W 0. FDC within circular spigots The cord should be fed through the air Finish PBG/NRG Galvanised sheet steel FDQ position. standard Order OBCO Cord operated opposed or rectangular spigots The cord should be fed through the air ORDER EXAMPLE Standard opposed blade duct or through the face adjustable blade device across the diffuser. Spigot Size Option Tel: +44 (0)

9 Waterloo Product Range Waterloo Product Range 9 Tel: +44 (0)

10 Waterloo Air Products plc