Self Build Sign System
|
|
- Mae Stafford
- 6 years ago
- Views:
Transcription
1 STRYDER TROUGHLIGHT (0)
2 PAGE 2 LITE CONTENTS TROUGHLIGHT PAGE 2 TROUGHLIGHT SYSTEM The Stryder Troughlight system comprises our custom extrusion, brackets and caps and is available in lengths of up to 6000mm in a single section or almost any length above 6000mm in multiple sections. The system's range of fixings can be customised to meet any length or angle requirement, and is available with adjustable brackets to fix to walls, channel, trays and panels (both single sided and back to back). LEDs enable a bright and clear illumination of the chosen subject and Stryder comes as standard with LED tape, neoprene seals and gaskets and an IP65 rating. All components are available on a same working day despatch. As an alternative to a, these units can be supplied fully assembled but partially finished, powder coated to one of 07 stock RAL colours or fully finished complete with your graphics applied. Please note that all prices are supplied in component form only, carriage charges and VAT have not been included. Ashby Trade Sign Supplies is a manufacturer, designer and distributor of signage systems. Open longer for our customers convenience, our products can be purchased either as components, partly finished or fully finished systems. TROUGHLIGHT EXTRUSION Stryder s slimline extrusion is produced in 6000mm lengths and is available from stock in mill finish, RAL 906 white, RAL 9005 black and silver anodised. TROUGHLIGHT BRACKETS Stryder features a comprehensive range of brackets that can be customised to suit any mounting location or style including: wall, tray, channel, panel, double sided, variable and at 30, 60 or 90. Troughlight arms can be cut to any length to enable surfaces of up to 2000mm to be lit and all are available from stock in mill finish, RAL 906 white, RAL 9005 black and RAL 9006 white aluminium. LENS AND GEAR TRAY Stryder s lens has been specially developed and is ribbed to prevent spotting and give even light distribution across any surface. This polycarbonate extrusion is available in lengths of up to 3000mm and is designed to maximise the output of the 24 volt LED strip. WHITE LED STRIP & POWER SUPPLIES Stryder utilises a single strip of 24v LED tape to give a 200 Lumen/ metre output. An appropriate power supply supplied but is dependent on light length. FIXINGS A comprehensive list of all non-specific system components that are used throughout the range. All Items sold are subject to the Standard Trading Terms of Ashby Trade Sign Supplies Ltd. Copy on request or viewable at Prices are correct at the time of printing and may be subject to change. +44 (0) Paint References is RAL 906 (Traffic ) Anodised match RAL 9006 ( Aluminium)
3 STRYDER TROUGHLIGHT TROUGHLIGHT EXTRUSION PAGE 3 Stryder Troughlight Extrusion STLCEM*.0 / STLCEB*.0 / STLCEW*.0 / STLCEA*.0 LENGTH Stryder Troughlight Extrusion 5m Dimensions: 60mm x 45mm Stryder Troughlight Extrusion 6m Dimensions: 60mm x 45mm STLCEM5.0 STLCEB5.0 STLCEW5.0 STLCEA5.0 STLCEM6.0 STLCEB6.0 STLCEW6.0 STLCEA T6 6063T6 Mill Finish Anodised Mill Finish Anodised 5m 6m Stryder Troughlight Cast End Cap STLCBECM / STLCBECB / STLCBECW / STLCBECA Cast aluminium cap with gasket. Troughlight Wall Bracket STLCBWM / STLCBWB / STLCBWW / STLCBWA Page 4 Stryder Troughlight Extrusion STLCEM*.0 / STLCEB*.0 / STLCEW*.0 / STLCEA*.0 Cut the troughlight extrusion to the required length. Stryder Troughlight Acrylic Lens Extrusion STLCAL Page 0 Troughlight Cap Screw ACS4x9.5S / ACS4x9.5B Page 4 Large Cable Gland (/) ALEDCGLB/ALEDCGLW Page 4 Stryder Troughlight Cast End Cap STLCBECM / STLCBECB / STLCBECW / STLCBECA Stryder Troughlight Cast End Cap Dimensions: 65mm x 55mm x 8mm Requires: Note: STLCBECM Mill Finish CAST STLCBECB STLCBECW LM6 STLCBECA RAL Stryder Cap Foam Gasket STLCRG (Page 3) Troughlight Cap Screw ACS4x9.5S / ACS4x9.5B (Page 4) Due to the Stryder Cap being Cast these can t be anodised, so we have them powder coated to the nearest match RAL 9006 (Off ) +44 (0) Tools required to cut the troughlight extrusion to the size required and to fit troughlight cast caps(metal) to extrusion +
4 PAGE 4 LITE TROUGHLIGHT WALL BRACKET PAGE 4 Troughlight Wall Bracket STLCBWM / STLCBWB / STLCBWW / STLCBWA STLCBWM Mill Finish CAST Troughlight Wall Bracket STLCBWB Dimensions: 7mm x 40mm x 0mm STLCBWW LM6 STLCBWA RAL Requires: 5.5x25mm Counter Sunk Screw ACS5.5x25 (Page 4) Note: Due to the Stryder Wall Bracket being Cast these can t be anodised, so we have them powder coated to the nearest match RAL 9006 (Off ) Troughlight Arm Extrusion STLCBEM3.0 / STLCBEB3.0 / STLCBEW3.0 / STLCBEA3.0 LENGTH STLCBEM3.0 Mill Finish Troughlight Arm Extrusion STLCBEB m Dimensions: 26mm x 8mm STLCBEW T STLCBEA3.0 Anodised Requires: M6 Square Nut M6NUTS (Page 4) Troughlight Arm Extrusion STLCBEM3.0 / STLCBEB3.0 / STLCBEW3.0 / STLCBEA3.0 The troughlight arm extrusion can be cut to the required length. An arm length vs. depth of panel guide can be found on the back page of this brochure. 5.5x25mm Counter Sunk Screw ACS5.5x25 Page 4 M6 2mm Dome Head Bolt M6DOME2 Page 4 Troughlight Projecting Arm End Cap STLCBPECM / STLCBPECB / STLCBPECW / STLCBPECA Page 5 M6 Washer (External Tooth) M6TWASHEXT Page 4 Troughlight Wall Bracket STLCBWM / STLCBWB / STLCBWW / STLCBWA M6 Square Nut M6NUTS Page 4 Troughlight Slider Bracket STLCBSM / STLCBSB / STLCBSW / STLCBSA Page 5 You will require a bracket every 000mm to support the troughlight extrusion. Wall Bracket Part Requirements (Per Bracket) x Troughlight Arm Extrusion (STLCBEM3.0) x Troughlight Projecting Arm End Cap (STLCBPECM) 2x M6 Square Nut (M6NUTS) 2x M6 2mm Dome Head Bolt (M6DOME2) 2x M6 Washer External Tooth (M6TWASHEXT) x Troughlight Slider Bracket (STLCBSM) x Troughlight Wall Bracket (STLCBWM) 2x 5.5x25mm Countersunk Screw (ACS5.5x25) +44 (0) Tools required to cut troughlight arm extrusion and fit troughlight bracket sections together +
5 STRYDER TROUGHLIGHT OTHER BRACKETS PAGE 5 Troughlight Slider Bracket STLCBSM / STLCBSB / STLCBSW / STLCBSA STLCBSM Mill Finish CAST Troughlight Slider Bracket STLCBSB Dimensions: 34mm x 30mm x 34mm STLCBSW LM6 STLCBSA RAL Requires: M6 2mm Dome Head Bolt M6DOME2 (Page 4) Note: Due to the Stryder Troughlight Slider Bracket being a cast these can t be anodised, so we have them powder coated to the nearest match RAL 9006 (Off ) Troughlight Projecting Arm End Cap STLCBPECM / STLCBPECB / STLCBPECW / STLCBPECA STLCBPECM Mill Finish Troughlight Projecting Arm End Cap STLCBPECB 050A Dimensions: 26mm x 8mm x 3mm STLCBPECW STLCBPECA RAL Requires: 5.5x25mm Counter Sunk Screw ACS5.5x25 (Page 4) Stryder Troughlight Extrusion STLCEM*.0 / STLCEB*.0 / STLCEW*.0 / STLCEA*.0 Page 3 Troughlight Cap Screw ACS4x9.5S / ACS4x9.5B Page 4 M6 8mm Grub Screw GSM0608 Page 4 The M6 Grub Screw can be tightened in the slider s pre-tapped hole to hold the slider bracket in place. Stryder Troughlight Cast End Cap STLCBECM / STLCBECB / STLCBECW / STLCBECA Page (0)
6 PAGE 6 OTHER BRACKETS Troughlight Channel Bracket STLCBCM / STLCBCB / STLCBCW / STLCBCA Troughlight Channel Bracket Dimensions: 50mm x 34mm x 2mm STLCBCM STLCBCB STLCBCW STLCBCA 050A Mill RAL Requires: 5.5x25mm Counter Sunk Screw ACS5.5x25 (Page 4) Troughlight Channel Bracket STLCBCM / STLCBCB / STLCBCW / STLCBCA 90 degree Channel Bracket Part Requirements (Per Bracket) x Troughlight Arm Extrusion (STLCBEM3.0) 2x 90 Arm Angle Brackets (STLCBA90M) x Troughlight Projecting Arm End Cap (STLCBPECM) 2x M6 Square Nut (M6NUTS) 2x M6 2mm Dome Head Bolt (M6DOME2) 2x M6 Washer External Tooth (M6TWASHEXT) x Troughlight Slider Bracket (STLCBSM) x Troughlight Channel Bracket (STLCBCM) 2x 5.5x25mm Countersunk Screw (ACS5.5x25) 90 Arm Angle Brackets STLCBA90M / STLCBA90B STLCBA90W / STLCBA90A Page 9 Troughlight Panel Bracket STLCBPM / STLCBPB / STLCBPW / STLCBPA STLCBPM Mill Troughlight Panel Bracket STLCBPB 050A Dimensions: 26mm x 00mm x 5mm STLCBPW STLCBPA RAL Requires: 5.5x25mm Counter Sunk Screw ACS5.5x25 (Page 4) Panel Bracket Part Requirements (Per Bracket) x Troughlight Arm Extrusion (STLCBEM3.0) x Troughlight Projecting Arm End Cap (STLCBPECM) 2x M6 Square Nut (M6NUTS) 2x M6 2mm Dome Head Bolt (M6DOME2) 2x M6 Washer External Tooth (M6TWASHEXT) x Troughlight Slider Bracket (STLCBSM) x Troughlight Panel Bracket (STLCBPM) 2x 5.5x25mm Countersunk Screw (ACS5.5x25) Troughlight Panel Bracket STLCBPM / STLCBPB / STLCBPW / STLCBPA +44 (0) Tools required to drill holes and fix brackets
7 STRYDER TROUGHLIGHT OTHER BRACKETS PAGE 7 Troughlight Tray Bracket STLCBTM / STLCBTB / STLCBTW / STLCBTA Troughlight Tray Bracket Dimensions: 26mm x 20mm x 50mm STLCBTM STLCBTB STLCBTW STLCBTA 050A Mill RAL Requires: 5.5x25mm Counter Sunk Screw ACS5.5x25 (Page 4) Tray Bracket Part Requirements (Per Bracket) x Troughlight Arm Extrusion (STLCBEM3.0) x Troughlight Projecting Arm End Cap (STLCBPECM) 2x M6 Square Nut (M6NUTS) 2x M6 2mm Dome Head Bolt (M6DOME2) 2xM6 Washer External Tooth (M6TWASHEXT) x Troughlight Slider Bracket (STLCBSM) x Troughlight Tray Bracket (STLCBTM) 2x 5.5x25mm Countersunk Screw (ACS5.5x25) Troughlight Tray Bracket STLCBTM / STLCBTB STLCBTW / STLCBTA Troughlight Double Sided Bracket STLCBDSM / STLCBDSB / STLCBDSW / STLCBDSA Troughlight Double Sided Bracket Dimensions: 30mm x 22mm x 8mm STLCBDSM STLCBDSB STLCBDSW STLCBDSA 050A Mill RAL Requires: 5.5x25mm Counter Sunk Screw ACS5.5x25 / M6 2mm Dome Head Bolt M6DOME2 (Page 4) Double Sided Bracket Part Requirements (Per Bracket) x Troughlight Arm Extrusion (STLCBEM3.0) 2x Troughlight Projecting Arm End Cap (STLCBPECM) 8x M6 Square Nut (M6NUTS) 8x M6 2mm Dome Head Bolt (M6DOME2) 4x M6 Washer External Tooth (M6TWASHEXT) 2x Troughlight Slider Bracket (STLCBSM) 2x Troughlight Double Sided Bracket (STLCBDSM) 4x 5.5x25mm Countersunk Screw (ACS5.5x25) Troughlight Double Sided Bracket STLCBDSM / STLCBDSB / STLCBDSW / STLCBDSA +44 (0) Tools required to drill holes and fix brackets
8 PAGE 8 ANGLED BRACKET COMPONENTS Comes Complete with 4x M6 8mm Grub Screw GSM0608 (Page 4) 30 Arm Angle Brackets STLCBA30M / STLCBA30B / STLCBA30W / STLCBA30A 30 Arm Angle brackets Dimensions: 24mm x 60mm x 3mm STLCBA30M STLCBA30B STLCBA30W STLCBA30A 050A Mill RAL Requires: Troughlight Arm Extrusion STLCBEM3.0 / STLCBEB3.0 / STLCBEW3.0 / STLCBEA3.0 (Page 4) 30 degree Wall Bracket Part Requirements (Per Bracket) x Troughlight Arm Extrusion (STLCBEM3.0) 2x 30 Arm Angle Brackets (STLCBA30M) x Troughlight Projecting Arm End Cap (STLCBPECM) 2x M6 Square Nut (M6NUTS) 2x M6 2mm Dome Head Bolt (M6DOME2) 2x M6 Washer External Tooth (M6TWASHEXT) x Troughlight Slider Bracket (STLCBSM) x Troughlight Wall Bracket (STLCBWM) 2x 5.5x25mm Countersunk Screw (ACS5.5x25) 30 Arm Angle Brackets STLCBA30M / STLCBA30B STLCBA30W / STLCBA30A Comes Complete with 4x M6 8mm Grub Screw GSM0608 (Page 4) 60 Arm Angle Brackets STLCBA60M / STLCBA60B / STLCBA60W / STLCBA60A 60 Arm Angle brackets Dimensions: 33mm x 50mm x 3mm STLCBA60M STLCBA60B STLCBA60W STLCBA60A 050A Mill RAL Requires: Troughlight Arm Extrusion STLCBEM3.0 / STLCBEB3.0 / STLCBEW3.0 / STLCBEA3.0 (Page 4) 60 degree Panel Bracket Part Requirements (Per Bracket) x Troughlight Arm Extrusion (STLCBEM3.0) 2x 60 Arm Angle Brackets (STLCBA60M) x Troughlight Projecting Arm End Cap (STLCBPECM) 2x M6 Square Nut (M6NUTS) 2x M6 2mm Dome Head Bolt (M6DOME2) 2x M6 Washer External Tooth (M6TWASHEXT) x Troughlight Slider Bracket (STLCBSM) x Troughlight Panel Bracket (STLCBPM) 2x 5.5x25mm Countersunk Screw (ACS5.5x25) 60 Arm Angle Brackets STLCBA60M / STLCBA60B STLCBA60W / STLCBA60A +44 (0) Tools required to cut the arm extrusion and fix the brackets and caps +
9 STRYDER TROUGHLIGHT ANGLED BRACKET COMPONENTS PAGE 9 Comes Complete with 4x M6 8mm Grub Screw GSM0608 (Page 4) 90 Arm Angle Brackets STLCBA90M / STLCBA90B / STLCBA90W / STLCBA90A 90 Arm Angle brackets Dimensions: 36mm x 36mm x 3mm STLCBA90M STLCBA90B STLCBA90W STLCBA90A 050A Mill RAL Requires: Troughlight Arm Extrusion STLCBEM3.0 / STLCBEB3.0 / STLCBEW3.0 / STLCBEA3.0 (Page 4) 90 Arm Angle Brackets STLCBA90M / STLCBA90B STLCBA90W / STLCBA90A 90 degree Channel Bracket Part Requirements (Per Bracket) x Troughlight Arm Extrusion (STLCBEM3.0) 2x 90 Arm Angle Brackets (STLCBA90M) x Troughlight Projecting Arm End Cap (STLCBPECM) 2x M6 Square Nut (M6NUTS) 2x M6 2mm Dome Head Bolt (M6DOME2) 2x M6 Washer External Tooth (M6TWASHEXT) x Troughlight Slider Bracket (STLCBSM) x Troughlight Channel Bracket (STLCBCM) 2x 5.5x25mm Countersunk Screw (ACS5.5x25) M6 8mm Grub Screw GSM0608 Page 4 Comes Complete with 4x M6 Square Nut M6NUTS and 4x M6 2mm Dome Head Bolt M6DOME2 (Page 4) Variable Arm Angle Brackets STLCBVM / STLCBVB / STLCBVW / STLCBVA Variable Arm Angle brackets Dimensions: 39mm x 9mm x 3mm STLCBVM STLCBVB STLCBVW STLCBVA 050A Mill RAL Requires: Troughlight Arm Extrusion STLCBEM3.0 / STLCBEB3.0 / STLCBEW3.0 / STLCBEA3.0 (Page 4) Troughlight Slider Bracket STLCBSM / STLCBSB STLCBSW / STLCBSA Page 5 Variable Arm Angle Brackets STLCBVM / STLCBVB STLCBVW / STLCBVA Variable degree Wall Bracket Part Requirements (Per Bracket) x Troughlight Arm Extrusion (STLCBEM3.0) 2x Variable Arm Angle Brackets (STLCBVM) 3x Troughlight Projecting Arm End Cap (STLCBPECM) 6x M6 Square Nut (M6NUTS) 6x M6 2mm Dome Head Bolt (M6DOME2) 6x M6 Washer External Tooth (M6TWASHEXT) x Troughlight Slider Bracket (STLCBSM) x Troughlight Wall Bracket (STLCBWM) 4x 5.5x25mm Countersunk Screw (ACS5.5x25) M6 Square Nut M6NUTS Page (0)
10 PAGE 0 LENS AND GEAR TRAY COMPONENTS Stryder Troughlight Acrylic Lens Extrusion STLCAL PRODUCT CODE MATERIAL Stryder Troughlight Lens Extrusion Dimensions: 4mm x 0mm STLCAL ACRYLIC THICKNESS.5mm WIDTH LENGTH Requires: Lens Extrusion Foam Gasket Cord STLCRI (Page 3) 4mm 3m v Water Resistant Power Supply 30 Watt ALEDPS030 WP24 Page 2 Stryder Troughlight Gear Tray STLCGT Stryder Troughlight Lens Extrusion STLCAL The polyethylene extruded lens easily clicks into place and can only be taken out if the end caps are removed. 24v Flexible LED Strip 5m ALEDRIBBON5.024V Page Troughlight Wall Bracket STLCBWM / STLCBWB / STLCBWW / STLCBWA Page 4 Stryder Troughlight Gear Tray STLCGT PRODUCT CODE MATERIAL THICKNESS WIDTH LENGTH Stryder Troughlight Gear Tray Dimensions: 50mm x.6mm STLCGT 050A.6mm 50mm 2.5m GEAR TRAY TOP Stryder Troughlight Extrusion STLCEM*.0 / STLCEB*.0 / STLCEW*.0 / STLCEA*.0 Page 3 GEAR TRAY BOTTOM Stryder Troughlight lens Extrusion STLCAL 24v Flexible LED Strip 5m ALEDRIBBON5.024V Page Gel Connectors ALEDIDC Page 4 Block Connectors ALEDCB Page 4 3-Core Connector Cable ALEDC3C0B / EAC3C00B () ALEDC3C0W / EAC3C00W () Page 4 An earth cable is not required as the power supply is pre-earthed. Stryder Troughlight Gear Tray STLCGT +44 (0) Tools required to cut the troughlight acrylic extrusion
11 STRYDER TROUGHLIGHT FLEXIBLE LED STRIP PAGE 2v Flexible LED Strip.2m ALEDRIBBON.2 Lumen Output: 320 (per metre) 2v Flexible LED Strip 3m ALEDRIBBON3.0 Lumen Output: 320 (per metre) 2v Flexible LED Strip 4m ALEDRIBBON4.0 Lumen Output: 320 (per metre) 2v Flexible LED Strip 5m ALEDRIBBON5.0 Lumen Output: 320 (per metre) 24v Flexible LED Strip 5m ALEDRIBBON5.024V Lumen Output: 200 (per metre) PRODUCT 2v Flexible LED Strip.2m Dimensions: 0mm x 2.5mm 2v Flexible LED Strip 3m Dimensions: 0mm x 2.5mm 2v Flexible LED Strip 4m Dimensions: 0mm x 2.5mm 2v Flexible LED Strip 5m Dimensions: 0mm x 2.5mm 24v Flexible LED Strip 5m Dimensions: 0mm x 2.5mm Note: LENGTH 200mm 3000mm 4000mm 5000mm 5000mm COLOUR CODE ALEDRIBBON.2 ALEDRIBBON3.0 ALEDRIBBON4.0 ALEDRIBBON5.0 ALEDRIBBON5.024V WATTS (per strip) 5.76w 4.4w 9.2w 24w 72w Please see the LED Brochure for Maximum amount of LEDs (Per Power Supply) Make sure you purchase the correct power supply for your LED product Large Cable Gland (/) ALEDCGLB/ALEDCGLW Page 4 2v Water Resistant Power Supply 8 Watt ALEDPS08 WP Page 2 2v Flexible LED Strip.2m ALEDRIBBON.2 3-Core Connector Cable ALEDC3C0B / ALEDC3C00B () ALEDC3C0W / ALEDC3C00W () Page 4 TO MAINS (240V) +44 (0) Tools required to cut / uncoat / connect the wiring of the power supply and LED Strips.
12 PAGE 2 POWER SUPPLIES 2v Water Resistant Power Supply 0 Watt ALEDPS00 WP 2v Water Resistant Power Supply 8 Watt ALEDPS08 WP 24v Water Resistant Power Supply 30 Watt ALEDPS030 WP24 24v Water Resistant Power Supply 60 Watt ALEDPS060 WP24 PRODUCT CODE IP RATING WATTS 2v Water Resistant Power Supply 0 Watt Dimensions: 75mm x 35mm x 23mm 2v Water Resistant Power Supply 8 Watt Dimensions: 40mm x 30mm x 22mm 24v Water Resistant Power Supply 30 Watt Dimensions: 94mm x 28mm x 9mm 24v Water Resistant Power Supply 60 Watt Dimensions: 285mm x 30mm x 28mm Note: ALEDPS00 WP ALEDPS08 WP ALEDPS030 WP24 ALEDPS060 WP24 IP65 IP67 IP62 IP67 See LED brochure for what Power Supply you will need for the amount of LEDs chosen and IP rating chart Make sure you purchase the correct Voltage and Wattage Power Supply that you require for your LED product 0w 8w 30w 60w IP RATING CHART Ingress Protection Rating SAMPLE IP RATING: SOLID 6 LIQUID 7 FIRST DIGIT: SOLIDS SECOND DIGIT: LIQUIDS LEVEL OBJECT SIZE PROTECTED AGAINST EFFECTIVE AGAINST LEVEL OBJECT SIZE PROTECTED AGAINST EFFECTIVE AGAINST X Protection Unspecified (Untested) Protection Unspecified (Untested) X Protection Unspecified (Untested) Protection Unspecified (Untested) Not Protected >50mm >2.5mm >2.5mm >mm Dust Protected Dust Tight No protection against contact and ingress of objects. Any large surface of the body, such as the back of the hand, but no protection against deliberate contact with a body part. Fingers or Similar objects. Tools, thick wires, etc. Most wires, screws, etc. Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment, complete protection against contact. No ingress of dust; complete protection against contact The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g electrical conductors, moving parts) and the ingress of solid foreign objects Not Protected Dripping water Not protected Dripping water (vertical falling drops) shall have no effect. Vertical dripping water shall have no harmful effect when the Dripping water when tilted up to 5 enclosure is tilted at a angle up to 5 from its normal position. Water falling as a spray at any angle up to 60 from the vertical shall Spraying water have no harmful effect. Water splashing against the enclosure from any direction shall Splashing water have no harmful effect. Water projected by a nozzle (6.3mm) against enclosure from any Water jets direction shall have no harmful effects. Water projected in powerful jets (2.5mm nozzle) against the Powerful water jets enclosure from any direction shall have no harmful effects. Ingress of water in harmful quantity shall not be possible when the Immersion up to m enclosure is immersed in water under defined conditions of pressure and time (up to m of submersion). The equipment is suitable for continuous immersion in water under conditions which shall be specified by the manufacturer. Normally, Immersion beyond m this will mean that the equipment is hermetically sealed. However, with certain types of equipment, it can mean that water can enter but only in such a manner that it produces no harmful effects. The second digit indicates the protection of the equipment inside the enclosure against harmful ingress of water. +44 (0) Tools required to cut / uncoat / connect the wiring of the power supply and LED Strips.
13 STRYDER TROUGHLIGHT SEALING AND EXTENDING TROUGHLIGHTS PAGE 3 Stryder Cap Foam Gasket STLCRG Stryder Cap Foam Gasket NEOPRENE STLCRG Dimensions: 60mm x 50mm x 2mm FOAM Requires: Stryder Troughlight Cast End Cap STLCBECM / STLCBECB / STLCBECW / STLCBECA (Page 3) Lens Extrusion Foam Gasket Cord Dimensions: 5mm Diameter Requires: Note: STLCRI Lens Extrusion Foam Gasket Cord STLCRI LENGTH NEOPRENE 5m FOAM Stryder Troughlight Extrusion STLCEM*.0 / STLCEB*.0 / STLCEW*.0 / STLCEA*.0 (Page 3) You will require two runs of Foam cord at the length of the troughlight Stryder Extension Plate STLCEP Stryder Extension Plate 050A STLCEP Mill Finish Dimensions: 00mm x 38mm Requires: Pop Rivet (Small) PTRS (Page 4) Lens Extrusion Foam Gasket Cord STLCRI You will require two runs of Foam cord at the length of the troughlight Pop Rivet (Small) PTRS Page 4 Stryder Troughlight Extrusion STLCEM*.0 / STLCEB*.0 / STLCEW*.0 / STLCEA*.0 Page 3 Stryder Extension Plate STLCEP Stryder Troughlight Acrylic Lens Extrusion STLCAL Page 0 Stryder Cap Foam Gasket STLCRG Stryder Troughlight Extrusion STLCEM*.0 / STLCEB*.0 / STLCEW*.0 / STLCEA*.0 Page (0) Tools required to Drill the holes (3.5mm) in the trough lights and rivet the trough lights together
14 PAGE 4 FIXINGS 0m/00m 2-Core Cable () ALEDC2C0B / EAC2C00B 0m/00m 2-Core Cable () ALEDC2C0W / EAC2C00W PRODUCT 0m/00m 3-Core Cable () for 240V ALEDC3C0B / EAC3C00B CODE LENGTH 0m/00m 3-Core Cable () for 240V ALEDC3C0W / EAC3C00W DISCOUNT RATES (PER ITEM) 2-Core Cable () ALEDC2C0B 0m Core Cable () ALEDC2C0W 0m Core Cable () EAC2C00B 00m Core Cable () EAC2C00W 00m core Cable () ALEDC3C0B 0m core Cable () ALEDC3C0W 0m core Cable () EAC3C00B 00m core Cable () EAC3C00W 00m core Cable is for use with the Power Supply (between Mains and Power Supply) Gel Connectors ALEDIDC (To join 2 2v cables together ONLY) PRODUCT Block Connectors ALEDCB (To join cables together) Gel Connector Dimensions: 7mm x 2mm x 8mm Block Connectors Dimensions: 40mm x 24mm x 6mm Large Cable Gland () Dimensions: 40mm x 23mm x 23mm Large Cable Gland () Dimensions: 40mm x 23mm x 23mm Cable Tie Mount () Dimensions: 20mm x 20mm Cable Tie (Clear) Dimensions: 60mm x 4.8mm Large Cable Gland (/) ALEDCGLB/ALEDCGLW (To seal 3-core cable coming out of Troughlight) CODE ALEDIDC ALEDCB ALEDCGLB ALEDCGLW ALEDCTMB ALEDCT60C MATERIAL POLYCARBONATE PVC NYLON NYLON NYLON NYLON Cable Tie Mount () ALEDCTMB (Self Adhesive) FINISH Clear/Red Clear DISCOUNT RATES (PER BOX) Cable Tie (Clear) ALEDCT60C (BOX) Troughlight Cap Screw ACS4x9.5S / ACS4x9.5B 5.5x25mm Counter Sunk Screw ACS5.5x25 M6 2mm Dome Head Bolt M6DOME2 M6 Square Nut M6NUTS M6 Washer (External Tooth) M6TWASHEXT M6 8mm Grub Screw GSM0608 DISCOUNT RATES (PER BOX) Pop Rivet (Small) PTRS PRODUCT CODE MATERIAL FINISH (BOX) Troughlight Cap Screw (Silver) Troughlight Cap Screw () 5.5x25mm Counter Sunk Screw M6 2mm Dome Head Bolt M6 Square Nut M6 Washer (External Tooth) M6 8mm Grub Screw 3.x0mm Aluminium Pop Rivet (Small) ACS4x9.5S ACS4x9.5B ACS5.5x25 M6DOME2 M6NUTS M6TWASHEXT GSM0608 PTRS STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL Silver Silver Silver Silver Silver Silver Silver (0)
15 STRYDER OTHER BROCHURES TROUGHLIGHT 0 TM hitech CURVED SIGNAGE SOLUTION 02 CURVED SIGNAGE SYSTEM (0) (0) BOX LIGHT 06 COMPONENT SIGNAGE SYSTEM +44 (0) (0) K ect 0 INGER 03 POSTS 04 SIGN FRAME +44 (0) (0) FIN ALS 07 & Associated Fixings CAST SIGNAGE SYSTEM +44 (0) (0) Point of Sale PAGE BANNER including BANNER SIGNAGE SYSTEM SIGNAGE SYSTEM SIGNAGE SYSTEM +44 (0) (0) (0) (0) (0)
16 Stryder Bracket arm length Calculator ( x ) Length of Bracket Arm ( x ) (if you are using a tray add the return depth to the bracket measurement) 0mm 90mm 5mm 38mm 60mm 85mm 20mm 235mm 260mm 280mm 200mm 400mm Depth of Panel (if you are using a tray add the return depth to the bracket measurement) 600mm 800mm 000mm 200mm 400mm 600mm 800mm 2000mm *Please note the sizes stated on the chart are for guidance only* These measurements are set with the Wall Bracket set 00mm above the panel Troughlight Arm Extrusion ( x ) STLCEM*.0 / STLCEB*.0 / STLCEW*.0 / STLCEA*.0 Page (0)
Product Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationLouvre systems. Series WL Standard weather louvres. Incorporating. Standard range of single bank louvres as used in countless installations worldwide.
Louvre systems Incorporating Series WL Standard range of single bank louvres as used in countless installations worldwide. Good resistance to water ingress, with low resistance to airflow. Approximately
More informationApplications Profitronic 19 / Profitronic 19U
Applications Profitronic 19 / Profitronic 19U 54 Enclosure in variable length version using profile technology Standard construction or version with connection compartment Optional Polycarbonate transparent
More information* B = Bakery, V = Vegetable, C = Cheese, M = Meat, M = Meat, F = Fish
RECESSED LUMINAIRES - TARO www.oktalite.com/taro-r Type of luminaire Application areas Pan/tilt range Ceiling thickness Lumen category Light colour White Light colour Food* Cooling Supply unit Luminaire
More informationPRODUCT SPECIFICATION
DATE: November 2014 DESCRIPTION: ARB Intensity LED APPLICATION: Auxiliary Vehicle Lighting PART NO. : AR21S - ARB Intensity 21 LED Spot AR21F - ARB Intensity 21 LED Flood PRODUCT GROUP: 399 - ARB BARCODE:
More information* B = Bakery, V = Vegetable, C = Cheese, M = Meat, M = Meat, F = Fish
RECESSED LUMINAIRES - TARO www.oktalite.com/taro-r Type of luminaire Application areas Pan/tilt range Ceiling thickness Lumen category Light colour White Light colour Food* Cooling Supply unit Luminaire
More informationIP44 - IP66 Rated RCD, Power & Cable Management
IP44 - IP66 Rated RCD, Power & Cable Management IP54 Rated 10 amp Switches IP66 Rated 10 amp Switches IP66 Rated 13 amp Sockets IP66 13 amp RCD switched Socket IP66 13 amp unswitched socket with timer
More informationLouvre systems. Series WL Standard weather louvres. Incorporating. Standard range of single bank louvres as used in countless installations worldwide
Louvre systems Incorporating Series WL Standard range of single bank louvres as used in countless installations worldwide Good resistance to water ingress, with low resistance to airflow Approximately
More informationCable Glands & Accessories
Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These
More informationNEMA Frame. W Premium Brake Motors NEMA. Foot Mounted 3PH, 60 Hz Aluminum Construction /5T 4.5
W Premium Brake Motors NEMA NEMA Foot Mounted 3PH, 60 Hz Aluminum Construction Performance - Page 77 Dimensions - Pages 67-68 Plus Additional Length shown below FOOT MOUNTED CC133B HP RPM FRAME BRAKE 230/460*
More informationGV Standard Pyramid Operation and Maintenance Manual
GV Standard Pyramid Operation and Maintenance Manual Technical experts in the design, manufacture and supply of precision engineered, architectural rooflights for residential and commercial buildings.
More informationDesk-top cases PropacPRO
Propacpro i Desk-top cases PropacPRO OVERVIEW MAIN KATALOG Cabinets....... 1 Wall mounted cases......... 2 Accessories for cabinets and wall mounted cases.. 3 Climate control.. 4 Electronics cases.........
More informationstainless steel Cover hinge The cover hinge is simply screwed to the box protection channel and to the edge fold. Model No. KL
aus HB, S. 46 The Rittal range of terminal boxes offers 44 practical designs, developed and improved in constant dialogue with users. Whether with or without gland plates, in stainless steel, EMC version
More informationcomplete vehicle lighting solutions
catalogue 03 of 05 issue 01.1 www.ledautolamps-uk.com LED Warning Beacons LED Directional Warning Lights LED Lightbars Tail-Lift Controls www.electraquip.co.uk Contact us: Tel: +44 (0)121 313 2222 Fax:
More informationsince Volt April 2017
since 1972 12 Volt April 2017 1 2017 CES Stories $69.99-$169.99 $159.99-$299.99 Positioning: Better Last Refresh: 2003 Available: Speakers Now Subwoofers: Spring 2017 Positioning: Best Last Refresh: 2008
More informationProfitronic I. Technical data
Profitronic I Aluminium electronic enclosure for telecommunication and MCR technology Variable length version using profile technology Screw-down fins integrated into sides Different lid versions depending
More informationSADEv STRoNG SADEv MEDIUM PAGE 2
Sadev Strong Sadev Strong The Strong sliding door system has unique features that set it apart from the competition. Practical design to assist with installation, precision machined components, the strength
More informationTable of Contents. About ATC Clayton 2
Table of Contents About ATC Clayton 2 STANDARD EXTRUSIONS Angle 4 Channel 8 Drawn tube 12 Flat bar 13 Machine bar 18 Rectangular hollow 19 Round bar 22 Round tube 23 Square bar 25 Square hollow 26 Tee
More informationDesk-top cases b. Flexible expansion options, for 19" components e.g. plug-in unit units, or for individual expansion
Overview... 0 Cainets... 1 Desk-top cases Wall mounted cases... 2 Accessories for cainets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 02004009 Suracks/ 19" chassis... 6 Front panels,
More informationSLIDING DOORS STRONG
SLIDING DOORS Single door fixed to wall strong A common use of the NFK Strong Sliding Door. The track attaches to the wall across the top of an opening and produces a clean, modern and functional door.
More informationIEC Frame B3 Foot Mounted / V, 3PH, 50/60 Hz Cast Iron Construction
ATEX IEC - EExde IIC Explosion Proof IEC B3 Foot Mounted 380-415/440-480V, 3PH, 50/60 Hz Performance - Page 87 Dimensions - Page 73-74 Features: Motors comply with CENELEC/EURONORM Standards EN60079 Certified
More informationTHE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
More informationP & P Technology Ltd
P & P Technology Ltd General Information Produced effectively from a single continuous filament, knitted wire meshes produce very high levels of EMI shielding performance when evenly compressed between
More informationR.V & INTERIOR LIGHTING
R.V & INTERIOR LIGHTING C O N V E N T I O N A L L A M P S 2 74 D O M E L A M P S 2 7 6 F L U O R E S C E N T L A M P S 2 7 8 C O U R T E S Y L A M P S 2 8 1 S W I V E L L A M P S 2 8 3 T R U C K A N D
More informationRADIANCE SUSPENDED RECESSED SURFACE MOUNTED RECESSED (PLASTERBOARD CEILING) Jul. 18
1 RADIANCE SUSPENDED RECESSED SURFACE MOUNTED RECESSED (PLASTERBOARD CEILING) Jul. 18 www.thorlux.com 2 The sophisticated shallow construction of the Radiance incorporates all the control gear into the
More informationNEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors
NEW BRAKE DESIGN For C-FACE Motors from NEMA Frame Motors 70 SERIES DOUBLE C FACE BRAKE The Next Generation in Direct-Acting Brakes DIRECT REPLACEMENT for Stearns 87,700 Series Brakes DINGS TRADITIONAL
More informationINDUSTRIAL LIGHTING TAURIS MODEL NUMBER F220 TAURIS 2 MODULE F221 TAURIS 3 MODULE F222 TAURIS 4 MODULE SPECIFICATIONS HOUSING : LM 6 die cast aluminium and extruded aluminium. LIGHT SOURCE : The fitting
More informationAqua-safe. Waterproof Plug & Socket Connectors Simply better designed
Aqua-safe Waterproof Plug & Socket Connectors Simply better designed 2 Aqua-safe Simply better designed Elkay s Aqua-safe is the only all-round solution for safely connecting and carrying power through
More informationVEROTEC Electronics Packaging
VEROTEC Electronics Packaging Eurotec Eurotec E u r o t e c c a s e f r a m e s Eurotec CASEFRAMES The Eurotec Caseframe is designed for applications that require the mounting / housing of Eurocard-style
More informationlight FULL BLEED APPLICATION SHOT RENDERING
A6 FULL BLEED APPLICATION SHOT RENDERING A6 ANATOMY POWERFUL PERFORMANCE High performance Nichia 80+ CRI LEDs provide an optimal source for tailored ing design. 4.44 3.44 FLEXIBLE SUSPENSION The variety
More informationevolution 3D tough Never Looked evolution front bars a tough, full replacement winch bar that enhances the look of your vehicle
evolution 3D TM Winch Bar All Rhino 4x4 products are tested to Australian standards & ARE Air bag compatible. FORTUNER 2015+* * FORTUNER is a trade mark of Toyota Australia tough Never Looked so Good evolution
More information19" chassis F. Downloads and further important information can be found on the Internet under Overview Cabinets...
Overview... 0 Cabinets... 1 19" chassis Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 02192001 Subracks/ 19" chassis... 6 ront panels,
More informationTARO MINI RECESSED LUMINAIRES
TARO MINI RECESSED LUMINAIRES TARO MINI enables perfect illumination of decorations placed at higher levels. TARO MINI is not just small and extremely easy to install, but extremely flexible as well: the
More informationLight Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
More informationStainless Steel Enclosures TRIMURTI STAINLINK EQUIPMENTS PVT. LTD.
Stainless Steel Enclosures A P P R O V E D TRIMURTI STAINLINK EQUIPMENTS PVT. LTD. Vision People: Technology: Growth: Profit: Culture: Create a conducive environment to leverage one s full potential Invest
More informationUSP s. 30 mm BEND RADIUS
Side Deco - White F UV GLOW WIRE 850 C CLEANING AGENTS RoHS FROST IP40/IP68 SEA WATER IK08 SWIMMING POOL R 30 mm BEND RADIUS USP s Made in Europe Unique co-extrusion technology with built in reflection
More informationGTK 80. Technical data
Industrial square suspension system with open cable duct for heavy loads Modular construction with free accessible cable duct Floor, top-mounting or wall exit options Technical data Material: connecting
More informationSECTION. Watertight & Dust-Tight Plugs & Connectors
SECTION Watertight & ust-tight Wetguard Product Line Section Contents LIFETIME Wetguard Plugs, Connectors & Straight Blade 2-Pole 3-Wire 2-Pole 3-Wire 3-Pole 4-Wire 3-Pole 3-Wire Non- 4-Pole 4-Wire Non-
More informationModular Enclosure System
Modular Enclosure System Flexible design, maximum versatility ENCLOSURES AND CLIMATE CONTROL NHP Electrical Engineering Products NZ nhp-nz.com 0800 NHP NHP MODULAR enclosure system The MODULAR enclosure
More informationSPECIFICATION SHEET ORION ROAD LANTERN. IP66 RATED CRI. 230v /50hz
ORION ROAD LANTERN Arc shape cooling guide design, resulting in effective heat dissipation and dust removal ability Combined optical lens, ideal for road lighting requirements Power-off protection socket,
More informationACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
More informationVEHICLE LAMPS, BEACONS & REFLECTORS
VEHICLE LAMPS, BEACONS & REFLECTORS CALL 0383 7984 ORDER ONLINE unitedindustrial.co.uk FREE DELIVERY ON ORDERS OVER 75* BEACONS /4V Rotating Beacon Bolt Mounted Suitable for both V and 4V applications.
More information19" CASES SECTION INDEX
19" CASES SECTION INDEX NEW VEROTEC... 5.03-5.22 INTRODUCTION TO THE DIPLOMAT RANGE... 5.23 NEW ASSEMBLY SERVICE... 5.26 DIPLOMAT CASES... 5.27 DIPLOMAT 19" Cases 3U and 4U Versions. 5.29 DIPLOMAT 19"
More informationPlaster In Grilles 1/1.5/B/1. AHP Plaster-in Linear Bar Grille ADMP Plaster-in Linear Diffuser ALSP Plaster-in Linear Slot Diffuser
1/1.5/B/1 Plaster In Grilles AHP Plaster-in Linear Bar Grille ADMP Plaster-in Linear Diffuser ALSP Plaster-in Linear Slot Diffuser TROX UK Ltd Caxton Way Thetford Norfolk IP24 3SQ Telephone +44 (0) 1842
More informationSLOT DIFFUSERS, ROUND DUCT DIFFUSERS
SLOT DIFFUSERS, ROUND DUCT DIFFUSERS Slot diffusers LD-3, LD-4, LD-5 LD-3 LD-4 LD-5 SLOT DIFFUSERS Application: Slot diffusers are designed for air supply in rooms with floor to ceiling heights of 2.5
More informationEmergency Light Fitting for Fluorescent Lamps Series ECOLUX 6608 Economy
www.stahl.de > For fluorescent lamps 2 x 18 W and 2 x 36 W > Electronic ballast with integrated emergency light electronics > Battery is integrated in the lamp enclosure > For emergency light mode 1.5
More informationThe Tracking Magnet Surface High-tech LED lighting system for interior architecture
Description The Tracking Magnet system is creative, flexible, reliable and precise. Accent fixtures can be rapidly exchanged and repositioned without tools using the magic of magnets. A variety of accent
More informationSURFACE/CEILING & SUSPENDED MOUNT INSTALLATION
SURFE/CEILING & SUSPENDED MOUNT INSTALLATION E477827 E477827 APPLICATION NL luminaires are designed for use indoors, outdoors, wet locations, areas containing moisture, dirt, corrosion, vibration and rough
More informationgeneral characteristics
general characteristics - overview CG/G series ( 44.27, 57.27, 77.27, 104.27 ) The new CG/G series of fixed and portable enclosures for connectors combines water tightness to rating and high mechanical
More informationPart-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A
*Mounting angle ( ) on the adapter serves as a support to locate the case in the right position. After attachment of the adapter, the mounting angles can be easily removed. Tilt foot bar, Case feet TILT
More informationRittal CM Compact System Enclosures
Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures
More informationCelest. A new era in white light, combining efficiency and style
Celest A new era in white light, combining efficiency and style Improving efficiency, output and the surrounding environment Celest lanterns, with TC-L lamps, offer a number of distinctive benefits to
More informationAll our Eterna Emergency Exit Signage comply with current Exit Signage Regulations using the Signs Directive format.
PAGE 28 EMERGENCY EXIT SIGNAGE GUIDANCE All our Eterna Emergency Exit Signage comply with current Exit Signage Regulations using the Signs Directive format. 4 Our Eterna legends fulfil the legal and technical
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationSuspension System CS-3000
Suspension System CS-3000 Straight coupling Elbow coupling (colour) 1015300177 RAL 9006 white aluminium 1015300001 RAL 16 anthracite grey 101530017 RAL 9006 white aluminium 1015300002 RAL 16 anthracite
More informationInterior Lamps Work Lamps Cable Harness Systems
catalogue 03 of 05 issue 01.1 www.ledautolamps-uk.com Contact Us: Tel: +44 (0)121 313 2222 Fax: +44 (0)121 313 2272 Email: sales@ledautolamps-uk.com Trading hours: Mon Fri, 8:30 17:00 (UK) LED Autolamps
More information2: Stylebox Stylebox 15 Overview B 2_ Complete Stylebox 15 Kits B 2_ Stylebox 15 Standard Kit B 2_8
2.1 Stylebox 15 Overview 2_3 2.1.1 Complete Stylebox 15 Kits 2_7 2.1.2 Stylebox 15 Standard Kit 2_8 2.2 Stylebox 15 Smart 2_10 2.2.1 Width 2_11 2.2.2 Height ezel 2_11 2.2.3 Depth 2_11 2.2.4 Top Cover Panel
More informationVERONEX Cases MATERIAL PERFORMANCE CHARACTERISTICS. MECHANICAL PROPERTIES Units Test method Result. THERMAL PROPERTIES Units Test method Result
VERONEX Cases VERONEX is a breakthrough in plastic enclosure design, combining the versatility and functionality demanded by engineers, with the modern styling appreciated by their customers. The VERONEX
More informationIP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
More informationLinear Luminaire for Fluorescent Lamps Series ECOLUX 6600
> 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series 6600
More informationa total louvre design and manufacturing service
BL-LD Series Fully Louvred Doors Index Page BL50LD Aluminium louvred door 3 BL75LD Aluminium louvred door 4 BL50BF Insert louvres for doors 7 BL-LD Series - Fully Louvred Doors For more details on the
More informationThe new and improved. Minebars
The new and improved Minebars Engineered to Last Designed and manufactured in Australia, the IONNIC range of Minebars & ROPS bars, are built using the highest quality materials and workmanship. With 16
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More informationMETTEC DESK CASES DESK CASES
METTEC DESK CASES DESK CASES Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. Stand: 11/98 e Copyright 1998 OKW Gehäusesysteme KG Germany
More informationTrax VQ. 2 nd edition
Trax VQ 2 nd edition Flex Q 1 5 8mm ( 16 ") 5 15mm ( 8 " ) 2 25mm (1") finish anodised accessories chrome satin chrome glass clear frosted 1 Linx Q Trax VQ Trax VQ allows for simple single point display
More informationKEPLERO MINI HE Efficiency & Interchangeability
KEPLERO MINI HE Efficiency & Interchangeability Professional Inground LED Fixture Concept: Compact high performance inground single source COB LED fixture with 3 different fixed optic beam options and
More information60 Watt LED Light Bar - 6 X 10 WATT LEDs - Aluminum Housing Lumens - Adjustable Locking Base
60 Watt LED Light Bar - 6 X 10 WATT LEDs - Aluminum Housing - 5400 Lumens - Adjustable Locking Base Part #: LED10W-6R-ALB Buy American Compliant The Larson Electronics LED10W-6R-ALB LED Light Emitter offers
More informationSHOWER SCREEN CATALOGUE
SHOWER SCREEN CATALOGUE V1 Purity frameless shower screens PURITY FRAMELESS RETURN PANELS WIDTH 2050mm Order Code Width Height Thickness Sqm Weight P-R-0797 797mm 2050mm 10mm 1.63 41kg P-R-0870** 870mm
More informationNo. Part name Pcs Material Color / Finish
EXW SERIES IP65 ALUMINIUM CASE with CORNER GUARD IP65 is made possible by sealing between top & bottom covers and end panels with gaskets. Available in 39 different standard sizes and 6 color combinations
More informationIncorporating V2.1. Product spec >>> > Series ECG - Egg crate grilles
Incorporating V2.1 Product spec >>> > Series ECG - Egg crate grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract grille Plastic egg crate core optional
More informationVEROTEC. Diplomat Cases & Caseframes. Electronics Packaging. 4 Diplomat Cases 4.01
VEROTEC Electronics Packaging Diplomat Cases & Caseframes UK 44 (0)2380-246900 sales@verotec.co.uk US 1-603-821-9921 sales@verotec.us FR 33 (0)3-444-514-60 sales@verotec.fr 4.01 Diplomat Value Added Services
More informationTetra minimax. LED Lighting System. BEFORE YOU BEGIN Read these instructions completely and carefully. Installation Guide
Installation Guide Volt Tetra minimax LED Lighting System GEMMRD-W, GEMMGL-W, GEMMBL-W BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSMENT RISK OF ELECTRIC SHOCK Turn
More informationIncorporating V2.0. Product spec >>> > Series NV - Non vision grilles
Incorporating V2.0 Product spec >>> > Series NV - Non vision grilles Grilles Non-vision Recommended for: Wall & door Supply & extract Overview Block line of sight into private areas Giving adequate ventilation
More informationFor More Information Toll Free:
Version 4.0 SIMPLY THIN Table of Contents LED Light Panel Standard 2 Dynamic White 3 RGB 4 Panel Configuration Options 5 Gallery Samples 6 E347880 For More Information Toll Free: 1 (888) 580-6366 Or Visit
More informationProject Name: Part Number: Type: v q k. ^ o o. R v b ^ o
v q k ^ Project Name: Part Number: Type: WTZ AMAZON FEATURES Impact resistant, Ribbed Acrylic Frosted (RAFL std.), Ribbed Polycarbonate (RPCL) Deep Clear Lens (DPCL) or Deep Frosted Lens (DPFL) options
More information31 Watt Low Voltage LED Fixture for Industrial Lighting - Adjustable Trunnion U-Bracket Mount
31 Watt Low Voltage LED Fixture for Industrial Lighting - Adjustable Trunnion U-Bracket Mount Part #: GAU-31L-LV Page: 1 Buy American Compliant The GAU-31L-LV is a low voltage industrial lighting solution
More informationLight Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
More informationSmall cases... the perfect shell for valuable electronics
Small cases... the perfect shell for valuable electronics Small cases page 178 mini page 181 page 183 all standard size cards (100, 120, 160, 190 to 233,35 ) can be installed in one case favourable EMC
More informationMuseum Alkmaar - Alkmaar, Netherlands
Museum Alkmaar - Alkmaar, Netherlands 270 Lytespan 1 283 Lytebeam 287 Universal Suspensions TRACK 292 Nanotrack 1 267 TRACK Strellson - Moscow, Russia Construction: Total Max Load: Finish: Extruded aluminium
More information16 Watts General Area Use LED Light Fixture - 24" Light Bar
16 Watts General Area Use LED Light Fixture - 24" Light Bar Part #: GSLEDIP24-GEN Buy American Compliant The Larson Electronics GSLEDIP24-GEN is a low voltage lighting solution approved for for use in
More informationlight J ANATOMY or CLEAN CANTILEVER Sleek square aluminum tube cantilever arms allow integral powerfeed to an electrical junction box.
J J ANATOMY CLEAN CANTILEVER Sleek square aluminum tube cantilever arms allow integral powerfeed to an electrical junction box. 4.00 12.00 or 24.00 PRECISE ROTATION CORE CAPACITY Integral 0-10V dimming
More informationPolyester-Enclosures MBP
24 MULTI-BOX Enclosure solutions Polyester-Enclosures MBP Protection class IP 66 MBP-Enclosures correspond with the high requirements of the mechanical engineering, shipbuilding, galvanic and petrochemical
More informationLight/Energy. Halogen floodlight. Fire Brigade 500 W halogen floodlight. Fire brigade 1000 W halogen floodlight. Quality since 1903
Halogen floodlight Fire Brigade 500 W halogen floodlight The Dönges 500 W floodlight is a top quality, cost-efficient halogen operational floodlight with special modifications for the fire brigade and
More informationEJB Enclosures. ATEX II 2 G Ex d IIB+H2 T6...T3 - II 2 D Ex td A21 T85 C C IECEx Ex d IIB+H2 T6...T3 - Ex td A21 T85 C...
EJB Enclosures ATEX and IECEx Zone 1 certified Explosion proof Marine grade copper-free aluminium IP66 The EJB Series is a range of explosion-proof enclosures, available in either aluminium alloy (EJB)
More informationGE Lighting. Heavy Industrial High Bay & Low Bay Lighting. (ABR1 - Series) imagination at work
GE Lighting Albeo LED Luminaire Heavy Industrial High Bay & Low Bay Lighting (ABR1 - Series) imagination at work Product Features The Albeo ABR1-Series is an IP66 rated fixture for demanding industrial
More informationIP65 COOLEDGE TILE EXTERIOR R2 INSTALLATION MANUAL. Exterior TILE Jumper Cable. Exterior Cutout TILE. Cable Clamp. T-Cable.
5 YEAR SYSTEM WARRANTY 5 YEAR SYSTEM WARRANTY COOLEDGE TILE EXTERIOR R2 INSTALLATION MANUAL Exterior Cutout TILE Exterior TILE Jumper Cable T-Cable End Cap Cable Clamp Power Supply Control Module Waterproof
More informationGrilles & Diffusers. Series NV Non-vision grilles. Incorporating. Sight blocking design ensures privacy is maintained
Grilles & Diffusers Incorporating Series NV Sight blocking design ensures privacy is maintained Perfect for areas like changing rooms Four models available including units to suit door mounting and dark
More information19" chassis O. Content. Cabinets Wall mounted cases Accessories for cabinets and wall mounted cases. 3. Climate control.
Content Cabinets...... 1 OMain Catalogue 19" chassis O Wall mounted cases......... 2 Accessories for cabinets and wall mounted cases. 3 Climate control. 4 Electronics cases......... 5 Subracks/ 19" chassis....
More informationHIGH CAPACITY LINEAR SLOT DUFFUSERS
HIGH CAPACITY LINEAR SLOT DUFFUSERS CB SERIES Quality and efficiency without compromise Weltech Business Centre - Ridgeway - Welwyn Garden City - Hertfordshire AL7 2AA Tel: 01707 871526 - Fax: 01707 871
More informationweatherproof wiring accessories IP rated accessories designed to protect against water and dust ingress in the most arduous of conditions
weatherproof wiring accessories IP rated accessories designed to protect against water and dust ingress in the most arduous of conditions 2 Features & Finishes Ergonomic design with see through cover Multiple
More informationJet. Compact aluminium IP65 street lanterns
Jet Compact aluminium IP65 street lanterns Unrivalled product technology and in-house design innovation allow Jet to exploit the benefits of aluminium construction, high optical performance and product
More informationGLASS ACT SINGLE RPD14 SUSPENDED, WALL, SURFACE
GLASS ACT SINGLE RPD14 STANDARD SIZES Ceiling, Suspended Pendant, or Single/Double-Sided Wall Mount Luminaire LAMPING LED - 90+ CRI - 2700K/3000K/3500K/4000K Output: 500lm (at 83 lm/w) per luminaire Dimming
More informationFULL BLEED APPLICATION SHOT RENDERING
KM FULL BLEED APPLICATION SHOT RENDERING K1 M1 KM ANATOMY POWERFUL PERFORMANCE K1 1.50 High performance Nichia 80+ CRI LEDs provide an optimal source for tailored ing design. 0.75 optional aperture 7.00
More informationVSL4 Series. Description. Specifications. 2.13in. 2.03in. 3.50in
Description VSL4 series 4 LED vaporproof strip fixture is gasketed to provide dust and moisture resistant illumination. It withstands corrosion, splashing water, hose-directed water, damage from external
More information2.007 Design and Manufacturing I
MIT OpenCourseWare http://ocw.mit.edu 2.007 Design and Manufacturing I Spring 2009 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. The 2.007 Kit List
More informationSpec Sheet: IEC309 Switched Socket, Horizontal 16A. Part Number
Spec Sheet: IEC309 Switched Socket, Horizontal 16A Part Numbers Part Number EU67HSS316 EU67HSS416 EU67HSS516 Description IEC309 16A 3 Pin switched socket IEC309 16A 4 Pin switched socket IEC309 16A 5 Pin
More information20W LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - Class 1 Division 2
20W LED Strip Light for Hazardous Location Lighting - 24" Surface Mount Bar - Class 1 Division 2 Part #: HAL-24-16W-LED Page: 1 Buy American Compliant The Larson Electronics HAL-24-16W-LED is a low profile
More informationNUTP7-LED (Amber Finish) NUTP7-WLED (White Finish) 24V LED Tape Light Roll. Source: 24W Watts Per Foot CRI. 24V LED Tape Light Roll
ILLUMINATING THE FUTURE...SINCE 1989 NUTP7-LED (Amber Finish) NUTP7-WLED (White Finish) 24V LED Tape Light Roll PRODUCT DESCRIPTION Nora s very low profile, energy efficient LED tape is only 7/16" wide
More informationIt s time to get connected with
It s time to get connected with The essence of quality NEW See pag e6 PRATLEY products and P NUTS are distributed exclusively in the UK by: Cable Connectors Ltd Product Brochure Aluminium Alloy (Corrosion
More informationCANILO SUSPENDED LUMINAIRES - LED. Pan/tilt range. 3-P-Ad m Deckenbaldachin H11_EN, ceiling canopy H11, recessed plate H12
SUSPENDED LUMINAIRES - CANILO www.oktalite.com/canilo-p Type of luminaire Application areas Pan/tilt range Lumen category Light colour White Cooling Luminaire colour Surface Suspension length Nominal voltage
More information