EYECAP. by Quick Glance

Transcription

1 YC FIR RVNTION y Quick Glance

2 Specialized in lectrical Firestop products ith yecap's specialized technology, we provide solution for 1. Constructions compliance 2. Fire protection 3. Maintenance yecap Technology, partnered with top tier constructions companies, has proved its superiority at major construction sites. atents register Main roducts insulating cap terminal washer Other electrical supplies and fire-preventive material

3 YC KOR 05 dvanced technology YC KOR Insulating caps and terminal lugs are already commercialized and it proves successful via its features of color change y its temperature. mong the similarity, yecap technology shows its superiority, resulting in huge difference in its performance. ith wide spectrum of technical certificates and innovative patents, we guarantee safety & perfect construction with our products assortment of temperature-sensitive insulating cap, terminal lugs and washers. FIR RISK etecting with YC roduction ssortment for etection of Thermal Heat & rc insulating cap Terminal washer roduct features and enefits 01 Check y quick glance whether the lug is crimped via its transparent and 02 Check y quick glance whether the lug & cale is completely connected via its indicator ta 03 Check y quick glance whether overheat happens via its color change Thermalheat & its risk hen heated, polymeric material like electrical cales start pyrolysis and generate gas at 90C. Then heat accummulaion rc & its risk rc is discharge phenomenon of flash light accompanying the urning of the electrode. The duration of arc can e various from moment to extended time. The level of circulated electric current and duration of arc are the main causes for fire. In addition, arc defect may cause the heat over 1000C even with small electric current. Therefore, arc may directly or indirectly cause fire through thermal ageing of the insulators.

4 YC KOR 07 Certified numer Temperature Sensitive insulating Cap (YC-SI) Comparison Tale y YC-SI (for compressed terminal lugs) roduct features and enefits 1. ny installer, manager, inspector can check directly, thus preventing of fire in advance 2. ith its silicon and special dying material, it responds to the terminal change precisely 3. xcept the dying part (color and), the transparent ody let us check inside whether the crimping is properly made to prevent the not-completed work. 4. ith its fire-resisting material, it provides fire prevention y detecting overheat and arc. 5. I t provide 3 step prevention y using 3 checker insulating cap, terminal lugs and washers Specification T G ~ ~ ~ ~ / / Kcmil Kcmil Kcmil Kcmil Kcmil ① TY: () (Solderless terminal lugs type) ③ () (Tuular terminal lugs type) ② SIZ : mm² ~ 300 mm² ③ COOR : K(lack), R(Red),(lue),Y(Yellow), G(Green) YC-SI (for copper terminal lugs) U 224-The Standard for Specification xtruded lectrical Tuing RoHS IRCTIV 2011/65/U. RCH Regulation(C) No. 1907/ YC-SI () K ② xample for art Numer ① T G /0 3/ Kcmil Kcmil Kcmil Kcmil Kcmil Kcmil xample for art Numer ① TY : () (Solderless terminal lugs type) YC-SI () 25 K ① ② ③ () (Tuular terminal lugs type) ② SIZ : 25mm² ~ 400 mm² ③ COOR : K(lack), R(Red),(lue),Y(Yellow), G(Green) Material Y C (VC) Melting point heat-resisting 90~120 C 72~105 C - 60~315 C YC-SI (SIICON) y electrical features resisting arc & electrical discharge Certificate ROHS RCH U Flame Resisting Voltage/temperature Y C (VC) X V-1 600V / 105 C YC-SI (SIICON) V-1 600V / 150 C y Reversiility efore change after change reversile Reversile: after color change y overheat, the color changes to its original color when temperature gets normal Ir-reversile: after color change y overheat, the color doesn t change to its original color even when the temperature gets normal. (from the size of 50 mm to 400 mm, sq on compressed/copper terminal lugs) Ir-reversile: color change over 60 C, 70 C Reversile: color change at 60 C or 70 C. Temperature can e customized Various Invention patent Inspecting with naked eye and induce judgment of inspector

5 YC KOR 09 Certified numer cooper terminal washer roduct features and enefits 1. ossile to check y quick glance whether the cale is correctly inserted into lug y its indicator ta. 2. ossile to check y quick glance whether overheat happens y its indicator ta. 3. rovide caution to workers, resulting in complete construction as it s visile to everyody. 4. rovide prevention of accident in advance with its quick glance checkup y installer, manager and inspector. Cooper terminal lug (one hole) Specification I. I. 25-1H H H H H H H H H H H Specification I. C I. 25-2H H Cooper terminal lug (two hole) U and CS C22.2 No , ire Connectors Hole 9.0 C Hole H H H H H H H H H Overheat detection y temperature sensitive outer circle. 2. etection of Thermal urn on all connected parts with olts i.e. oothduct, ooth-ar, power distriution panel). 3. One system with olt&nut avoid any detachment y traditional thermal tape. 4. revention of accident with its checkup y any persons among installer, manager, inspector y quick glance. 8.4 Specification t2 t1 hen cale eing insulted Cale is connected while the indicator ta is pushed out The cale is correctly connected with lug roduct features and enefits t1 t2 8SQ SQ SQ SQ SQ

6 YC KOR 11 Firestop penetration system for cale tray all Installation rawing Type:Cale tray on wall ased on the notice , Ministry of and Test-passed for Firestop Structure FM pprovals Class: 4990 Firestop oard irectly connected iece Firestop sealant sealing system 1. ith the material of co-friendly silicon, it curs generation of intoxicated gas 2. reinforced mechanical strength as zinc-galvanized steel and silicon-glued product 3. clean-room material without any particle 4. asy construction and installation even y un-skilled installer 5. deemed as FM pprovals as 2-hour rating roduct, approved as FM pproval Cale tray 30t Firestop foam 7t Firestop foam C lock Forming strip <Heated side> <Other side of eing heated> pproval item Firestop oard(cale tray)-all(gypsum)&floor(concrete) Firestop oard(ipe)-all(gypsum) Firestop foam Firestop oard(uct)-all(gypsum) Firestop oard(conduit)-all(gypsum)&floor(concrete) 1. Check the opening and measure the penetration and its material sizes 2. ith drawing with its dimension, design Firestop oard and cut with the tool of jigsaw 3. ith drill & piece, mount firestop oard on penetration area 4. S tick 2 pcs of forming strips y applying silicon 5. F ill the gaps with Firestop and surrounding with the Firestop silicon 6. Fill the space etween Firestop oard and cale with Firestop form and finalize its gap with Firestop silicon Firestop enetration System for Cale Conduit rawing Type:Cale conduit ased on the notice , Ministry of and Test-passed for Firestop Structure Hollow, depth150 Firestop For cale tray FirestopSealant (QS119R) Firestop cap ipe(st φ28) C lock <Heated side> FM pprovals Class: Check the size of enetration Material 2. S ealing around the pipe with Firestop Silicon 3. ush Firestop cap up to its sticking on wall 4. F ix the Firestop cap with clip <Other side of eing heated> The product appearance is suject to change upon its new registration of certificate to upgrade quality