PC3000. SANTA BARBARA CONTROL SYSTEMS 5375 Overpass Road Santa Barbara, CA USA PROGRAMMABLE CONTROLLER

Transcription

1

2

3 PC3000 PROGRAMMABLE CONTROLLER The CHEMTROL PC3000 microprocessor-based programmable controller with full remote operation capability introduces a new standard of sophistication in automated water treatment for many applications such as swimming pools, spas, waterparks and industrial water treatment. AUTOMATED WATER TREAENT with Duplex Remote Control and Probe Alert Safeguard* * U.S. Patent 5,95,55 STANDARD FEATURES ORP CONTROL of oxidizer with shock and chemical saving programs, Sanitizer PPM DISPLAY from ORP and ph, ph CONTROL with acid / base feed and probe rinse program, HEATER CONTROL with energy saver program, LANGELIER SATURATION INDEX for water balance, AUTOMATIC DATA LOGGING for up to 999 tests, FULL SCREEN MENUS in English, French or Spanish, Screen displays in US or METRIC UNITS, COMPATIBLE with all COMMON SANITIZERS, OXIDIZERS, and AUTOMATED CHLORAMINE TREAENT (A.C.T.) PROGRAM. OPTIONS Solid State FREE CHLORINE SENSOR for monitoring and control, CONDUCTIVITY / Total Dissolved Solids (TDS) CONTROL with autofill capability for salt generators, WATER LEVEL CONTROL with electronic sensor and fill valve control, MAIN PUMP CONTROL and FLOW RATE with cumulative display, INFLUENT/EFFLUENT PRESSURES monitoring with safety alarms, REMOTE COMPUTER OPERATION and GRAPHIC DATA DISPLAY, ETHERNET and INTERNET communication, MODBUS communication to Building Management Systems, -20 ma five-channel output to Building Management Systems, VOICE TELEPHONE communication. SIMPLE AND RELIABLE The CHEMTROL PC3000 is a user-friendly and reliable controller that is easy to install and operate. All menus are displayed in English, French or Spanish with choice of US or metric units. Each unit is supplied with a comprehensive operation manual, on-site startup and training by a Qualified Dealer and a FIVE- YEAR electronics warranty. EXTENDED TECHNICAL SUPPORT Technical support from CHEMTROL is based on our experience with over 30,000 installations worldwide. It is also available by toll-free phone, by fax or by . the CHEMCOM Program for Windows allows immediate technical support from our Service Department or from a Qualified Dealer by remote computer with true duplex operation. the patented Probe Alert Safeguard* constantly monitors the response of the ORP and ph probes and alerts the operator in case of probe failure. REMOTE COMPUTER OPERATION and GRAPHIC DATA DISPLAY under Windows Visit our Web Site at or call today for a free demo CD. SANTA BARBARA CONTROL SYSTEMS 5375 Overpass Road Santa Barbara, CA USA Leading in Automated Water Treatment Since 197 TOLL-FREE PHONE FAX INTERNET

4 POOL/SPA INSTALLATION SPECIFICATIONS MODEL SELECTION SCREEN DISPLAY 22 characters ORP mv with oxidizer and/or reducer Programmable shock treatment and chemical saving cycles ph 0-1 with acid and/or base feed SANITIZER 0-10 ppm (mg/l) CONDUCTIVITY / TDS 0-20,000 µs/cm conversion factor for TDS TEMPERATURE 0 to10 F (-1 to 0C) LANGELIER INDEX calculated from ph, Temp, total alkalinity and calcium hardness water balance display SENSOR CALIBRATION 1, 2 or 3 points CONTROL MODES Off, Manual, Auto, Timer ON/OFF or Proportional Feed ALARMS High/Low out-of-range Total feed time and Overfeed Patented Probe Alert* Safeguard Visual, audio and external alarms DATA LOGGING On-board memory for 999 tests RS232 communication port for local download and printing REMOTE OPERATION Data communication modem Ethernet/Internet modem CHEMCOM remote software and graphical display under Windows Telephone voice communication MULTIPLEXING RS5 port for multiple connections MECHANICAL 13 x 11 x 1/2 in. (3 x 29 x 17 cm) Rain and splatter proof NEMA Type X ELECTRICAL 10 A / 110 or 230 V with selector switch All output relays 5 A WARRANTY 5-year electronics 1-year sensors STANDARD FEATURES OPTIONS ORP CONTROL SANITIZER PPM DISPLAY ph CONTROL HEATER CONTROL LANGELIER SATURATION INDEX AUTOMATIC DATA LOGGING REMOTE ALARM RS232 FOR DIRECT DOWNLOAD BYPASS LINE ASSY or FLOW CELL ASSY with Safety Flow Switch FREE CHLORINE SENSOR WITH MONITORING AND CONTROL CONDUCTIVITY/TDS CONTROL WITH AUTOFILL FOR CHLORINE SALT GENERATORS FLOW RATE MONITORING AUTOMATIC WATER LEVEL CONTROL RECIRCULATION PUMP CONTROL INFLUENT/EFFLUENT PRESSURE MONITORING AUTOMATIC FILTER BACKWASH RS5 FOR MULTIPLEXING REMOTE COMPUTER OPERATION ETHERNET / INTERNET / WIRELESS OPERATION MODBUS COMMUNICATION TO B.M.S. -20mA FIVE-CHANNEL COMMUNICATIONS FOR B.M.S. MONITORING AND CONTROL VOICE TELEPHONE COMMUNICATION REPRESENTED BY: SHIPPING 19 x 19 x 11" ( x x 2 cm) carton Weight: 21 lbs (9.5 kg)

5 ATIONAL LINE ATIONAL LINE NATIONAL LINE FILTER SYSTEMS MODEL SELECTION The National Filter Systems are available in three (3) horizontal designs. They come in 3, 2 and 0 diameter tanks in various lengths. They are available in 50 or 100 P.S.I.G. operating pressures with top or end mount piping configurations (Filter Model 3-075, 0-200, and not available in top mount piping). This provides a wide range of filter bed surface areas from 7.5 up to 0 sq. ft. in 355 different models. All National LineFilter Systems can be used with multiple types of granular media or one (1) single grade of # 20 or # 30silica sand. The NFS-0 filtration system has a 27 usable filter media bed depth and can be used in multi-media configurations. NSF International, for single tank flow capacities, certifies all National Line Filter Systems to ANSI / NSF Standard 50 for both pool and spa applications from 37.5 to 1,00 U.S. GPM. NFS-3-SERIES Model # -050NFS-3-***-075* NFS-3-***-100* NFS-3-***-12* NFS-3-***-153* NFS-3-***-193* NFS-3-***-237* Model # Filter Area Ft2 NFS-2-***15* NFS-2-***-200* NFS-2-***-225* NFS-2-***250* NFS-2-***-275* NFS-2-***-310* NFS-2-***-30* NFS-2-***-10* NFS-2-***0* NFS-0-SERIES Filter Area Ft2 Flow Rate 5 to 20 US GPM Sq. Ft to to to to to to 7 Silica Shipping Pipe Backwash Size Sand Ft3 Weight Rate lbs. Inches USGPM Backwash Pipe Silica Shipping Flow Rate Sand Weight lbs. Rate Size 5 to 20 USGPM Inches US GPM Sq. Ft. Ft to to to to to to to to to Model # Filter Area Ft2 NFS-0-***-200* NFS-0-***-250* NFS-0-***-300* NFS-0-***-350* NFS-0-***-00* NFS-0-***-50* NFS-0-***-500* NFS-0-***-550* NFS-0-***-00* NFS-0-***-50* NFS-0-***-700* NFS-0-***-750* NFS-0-***-00* NATIONAL FILTERS HORIZONTAL SERIES NFS-2-SERIES Backwash Pipe Silica Shipping Flow Rate Rate Size Sand Weight 5 to 20 lbs. US GPM Sq. Ft. USGPM Inches Ft3 100 to to to to to to to to to to to to to *** Version Options: When ordering filters the *** shown in the model number should be replaced with the following options: A= 50 psi operating pressure contact molded shell with dual influent/ effluent connections, B= 50 psi operating pressure contact molded shell with single influent/ effluent connections, 50A= 50 psi operating pressure filament wound shell with dual influent/ effluent connections, 50B= 50 psi operating pressure filament wound shell with single influent/ effluent connections, 10A= 100 psi operating pressure filament wound shell with dual influent/ effluent connections or 10B= 100 psi operating pressure filament wound shell with single influent/ effluent connections, 050= 50 psi operating pressure filament wound shell for top mount piping connections, 100= 100 psi operating pressure filament wound shell for top mount piping connections. * Version Option: When ordering filters; the * shown in the model number should be replaced with E for end mount piping; T for top mount piping; S for base tank in end piped, filament wound, stacked tank on tank system.. NOTE: National Line NFS-Series Filters are certified by NSF International to ANSI / NSF Standard 50 for both pool and spa applications at filtration rates of 5 to 20 U.S. GPM / sq. ft. All NFS-Series Filters are certified by NSF International for use with # 20 grade silica sand, Zeoclere-30 zeolite or Zeobrite zeolite in fresh water/ salt water applications. Filter media and pumping equipment are NOT included with the filter tanks. ENGINEERING NOTES: All National Line NFS Filter Systems will have varying head loss that is dependent upon filter media and operational flow rates. Filters should be backwashed when 15 to 17 PSIG differential is indicated on the influent and effluent pressure gauges. When sizing the main circulation pump, calculate maximum head loss at 15 to 20 PSIG through the filter and face piping. EMATO CORP. 105 McEwen Dr., Whitby, Ont., Can. L1N 7L Tel: (00) or (905) Fax: (905) mail@nemato.com EMATO CORP. 105 McEwen Dr., Whitby, Ont., Can. L1N 7L Tel: (00) or (905) Fax: (905) mail@nemato.com

6 ATIONAL LINE Air relief valve Molded pressure gauge panel with two liquid filled gauges. Integrally molded influent/effluent Connections. Integrally molded F.R.P. saddle supports that meet Seismic Zone requirements. NATIONAL LINE FILTER SYSTEMS Nemato National Line filter tanks are constructed of Fiberglass Reinforced Isophthalic or Vinylester Resin (F.R.P.) and manufactured to AS and ASME tank standards using molded surfaces for all critical dimensions. The tanks are totally non-corrosive and have a high gloss gel-coat finish with UV protection. The filter systems are designed for working pressures of 50 P.S.I.G. or 100 P.S.I.G. with a to 1 safety factor. The filter systems are shipped with all internal components and media dump port in a fully assembled state. All National filter designs come with uniquely placed integrally molded influent/ effluent connections (both top piped & end piped), 12 X 1 integrally molded manhole seat with internally mounted F.R.P. or F.R.P./ Clear Acrylic cover, integrally molded F.R.P. saddle supports and molded pressure gauge panel with two (2) panel mount gauges. END PIPED FILTER SYSTEMS 12 x 1 F.R.P. manhole cover with square O -ring and integrally molded seat, internally mounted to effect a pressure assisted seal. Dual influent/effluent connections. National F.R.P. filter tanks are manufactured to AS and ASME tank standards with a high gloss gel-coat finish and UV Protection. Combination media dump port and drain. TOP PIPED FILTER SYSTEMS ATIONAL LINE NATIONAL NATIONAL LINE INTERNAL COMPONENTS The Upper Distribution System in all National Line filtration systems, incorporate proprietary hydraulically engineered ABS plastic distribution lenses. The lenses are strategically placed to ensure a flat uniform media bed while preventing turbulence, media migration and channeling over a broad range of flow rates ranging from 5 to 20 U.S.G.P.M. per sq. ft. of filter area. The Lower Collection System utilizes 2 ABS plastic laterals to retain multiple types of granular filter media or a single grade of #20 or #30 silica sand. The laterals are strategically placed to produce minimum head loss due to full filter bed coverage. The laterals are self-cleaning due to a molded V slot configuration and promote thorough filter media cleansing through balanced fluidization during backwash. NATIONAL LINE FILTER ACCESS & HANDLING SOLUTIONS National 3 Line filtration systems have an exterior molded surface for control of the 3 overall outside diameter. The controlled outside diameter and lightweight modular design allows for handling without special lifting equipment. All National 3 Line filtration systems can be walked through 5 openings as small as 3 ¼ for 50 P.S.I.G. systems and 3 for 100 P.S.I.G. systems. LINE HOUSEKEEPING PADS National Line filtration system Housekeeping Pads provide a reliable alternative to forming and pouring housekeeping pads on the job site. The Housekeeping Pad is suitable for use with filters, stacking stand or tank on tank designs. The Housekeeping Pads provide easy installation with accurate centerline alignment due to a self-locking tapered saddle support design. The Housekeeping Pads are constructed of Fibercrete (Vinylester resin, sand, gravel, and rebar) are totally noncorrosive and have a high gloss gel-coat finish with UV protection. All Housekeeping Pads are manufactured to Seismic Zone requirements. The lightweight, modular designs are economical to ship, and capable of supporting up-to a 0-sq. ft. stacked filtration system. Integrally molded influent/effluent connections. 12 x 1 F.R.P./Clear Acrylic manhole cover with square O -ring and integrally molded seat, internally mounted to effect a pressure assisted seal. Combination media dump port and drain. Air relief valve National F.R.P. filter tanks are manufactured to AS and ASME tank standards with a high gloss gel-coat finish and UV Protection. Integrally molded F.R.P. saddle supports that meet Seismic Zone requirements. NATIONAL LINE FILTER STACKING STANDS OR TANK ON TANK STACKING DESIGNS National Line filtration system stacking stands provide a reliable solution to floor space constraints. The stacking stand or tank on tank (for filament wound models only) designs allow for ease of installation in limited (1 ½ for 3 diameter, 9 for 2 diameter and 10 ¼ for 0 diameter filter systems) head space and provides for accurate tank to tank centerline alignment due to self-locking tapered saddle supports. The stacking stand provides for independent support or the top filter tank, which facilitates individual removal of the bottom filter tank where site conditions permit. The stacking stands are constructed of Fiberglass Reinforced Vinylester Resin (F.R.P.) for 3 and 2 diameter filters and epoxy painted steel for 0 diameter filters. All National stacking systems are manufactured to Seismic Zone requirements. The lightweight, modular designs are economical to ship, non-corrosive in design and capable of supporting up-to a 0-sq. ft. filtration system. EMATO CORP. 105 McEwen Dr., Whitby, Ont., Can. L1N 7L Tel: (00) or (905) Fax: (905) mail@nemato.com EMATO CORP. 105 McEwen Dr., Whitby, Ont., Can. L1N 7L Tel: (00) or (905) Fax: (905) mail@nemato.com

7 CLASSIC 5 PUMP SERIES SPECIFICATIONS 5MJL5A3S SINGLE HEAD ADJUSTABLE OUTPUT 100 psi (.9 bar) MODELS 5MHP2 5MHP10 5MHP22 MODELS 5M1 5M2 5M3 5M 5M5 SINGLE HEAD FIXED OUTPUT 100 psi (.9 bar) MODELS 5MPHP2 5MPHP10 5MPHP22 MODELS 5MP1 5MP2 5MP3 5MP 5MP5 10.".0".0".0" 5.3" SHIPPING WEIGHT 9 lbs ( kg) 5.3" SHIPPING WEIGHT lbs (3. kg) 927 Agency listings vary by model. Contact factory for details. FEATURES 3-point roller design assists in anti-siphon protection Pump head requires no valves, allows for easy maintenance Self-priming against maximum working pressure, foot valve not required Pump does not lose prime or vapor lock Pumps off-gassing solutions and can run dry Output volume is not affected by back pressure Injection check valve included with models rated up to 100 psi (.9 bar) Easy to change pump tube; lubrication is not required Pump tubes and pump heads interchange between models Models tested by Water Quality Association to conform to ANSI/NSF STD 1 (Santoprene only) Adjustable models tested by ETL to conform to ANSI/NSF STD 50 (Santoprene only) All pump accessories included allow a fast and easy installation Stenner Pump Company 317 DeSalvo Road Jacksonville, Florida 322 USA Phone US Toll Free Fax sales@stenner.com Stenner Pump Company All Rights Reserved

8 CLASSIC 5 PUMP SERIES SPECIFICATIONS OUTPUT CONTROL Adjustable models only, external dial ring adjustment from 5%-100% in 2.5% increments MAXIMUM WORKING PRESSURE 100 psi (.9 bar) 5MHP2, 5MHP10, 5MHP22, 5MPHP2, 5MPHP10, 5MPHP22 5M1, 5M2, 5M3, 5M, 5M5, 5MP1,5MP2, 5MP3, 5MP, 5MP5 MAXIMUM OPERATING TEMPERATURE 125 F (52 C) MAXIMUM SUCTION LIFT 25 ft (7. m) vertical lift, based on water MOTOR TYPE 1/30 HP, shaded pole, class B APPROXIMATE GEAR MOTOR RPM 2 DUTY CYCLE Continuous MOTOR VOLTAGE (AMP DRAW) 120V 0Hz 1PH (1.7) 220V 0Hz 1PH (0.9) 230V 50Hz 1PH (0.9) International 250V 50Hz 1PH (0.9) International POWER CORD TYPE SJTOW POWER CORD PLUG END 120V 0Hz NEMA 5/15 220V 0Hz NEMA /15 230V 50Hz CEE 7/VII 250V 50Hz CEE 7/VII MATERIALS OF CONSTRUCTION All Housings Polycarbonate Pump Tube & Check Valve Duckbill Santoprene *,optional Tygothane ** #1, #2, #5 tubes, FDA approved CV Duckbill with Tygothane ** Tube Pellathane Pump Head Rollers HDPE Roller Bushings Oil impregnated sintered bronze Suction/Discharge Tubing, Ferrules 1/" & mm Polyethylene, FDA approved Tube Fittings Gray: Type 1 Rigid PVC, NSF listed Black: PP, NSF listed Check Valve Fittings Type 1 Rigid PVC, NSF listed Connecting Nuts PP or Type 1 Rigid PVC Suction Line Strainer PP or Type 1 Rigid PVC body with Type 1 Rigid PVC cap, NSF listed; ceramic weight All Fasteners Stainless steel Pump Head Latches Polypropylene ACCESSORY KIT SHIPPED WITH EACH PUMP 3 connecting nuts 1/" or 3/" 3 ferrules 1/" or mm Europe OR 2 ferrules 3/" 1 injection check valve 100 psi (.9 bar) OR 1 injection fitting 1 weighted suction line strainer 1/", 3/" or mm Europe 1 20' roll suction/discharge tubing 1/" or 3/", white or UV black OR mm white Europe 1 additional pump tube 2 additional latches 1 mounting bracket 1 manual * Santoprene is a registered trademark of Exxon Mobil Corporation. ** Tygothane is a registered trademark of Saint-Gobain Performance Plastics. Pellathane is a registered trademark of The Dow Company. 5 SERIES PUMP ADJUSTABLE OUTPUT Approximate 0Hz Approximate 50Hz Single Head Maximum Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters Model Pressure Number per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute 5MHP2 * 5MHP10 * 5MHP22 * 100 psi (.9 bar) 100 psi (.9 bar) 100 psi (.9 bar) #1 #2 #7 5M1 5M2 5M3 #1 #2 #3 0.2 to to to to to to to to to to to to to to to to to to to to to to to to to to to.25 5M # 1.7 to to to to to to to to to M5 #5 2.5 to to to to to..0 to to to to SERIES PUMP FIXED OUTPUT Single Head Maximum Pump Tube Gallons Liters Gallons Liters Ounces Milliliters Liters Liters Milliliters Model Pressure Number per Day per Day per Hour per Hour per Minute per Minute per Day per Hour per Minute 5MPHP2 * 5MPHP10 * 5MPHP22 * 100 psi (.9 bar) 100 psi (.9 bar) 100 psi (.9 bar) #1 #2 #7 5MP1 5MP2 5MP3 #1 #2 # MP # MP5 # * Injection check valve included with pumps rated psi (1.-.9 bar). Approximate 0Hz Approximate 50Hz NOTICE: The information within this chart is solely intended for use as a guide. The output data is an approximation based on pumping water under a controlled testing environment. Many variables can affect the output of the pump. Stenner Pump Company recommends that all metering pumps undergo field calibration by means of analytical testing to confirm their outputs. The information contained in this flyer is not intended for specific application purposes. Stenner Pump Company reserves the right to make changes to prices, products, and specifications at any time without prior notice. 5SPEC Rev013012