INDUSTRIAL EQUIPMENT CLYDE Cutting And Grinding For Steel/Stainless Steel/Aluminum & Nuclear

Transcription

1 Measuring Instruments, Levels, Tape Measures & Construction Lasers New M Series Clamps, All Steel Fitter Clamps & Red Grip Pliers Carbide Burrs, Fibre Discs & Backing Pads CLYDE INDUSTRIAL EQUIPMENT cie@ciecanada.com

2 Introducing HYDROPROTECT HydroProtect: The built-in performance protection Even when they are not in use, resin-bonded wheels from all manufacturers age and their performance diminishes over time. During the storage of wheels, moisture penetrates between the bond matrix and abrasive grains and weakens the bond. Rhodius has come up with a formula, HydroProtect, that slows down the aging process caused by moisture and keeps the performance of the wheels almost constant for some time. This keeps the performance at a permanently high level, from the manufacture of the wheel through to the actual time of use. Products in the HydroProtect line are XT8 EXACT, XTK35 CROSS, XT, XT20, XT67 and XT24. GET THAT EXTRA PROTECTION FOR YOUR PERFORMANCE! Conventional Disc During the storage of wheels, moisture penetrates between the bond matrix and abrasive grains. HydroProtect: The built in performance protection Thanks to the altered recipe, the abrasive grains are encased in a protective barrier layer. This weakens the bond and the grains break out during the cutting process without effect. This reduces the premature splintering of the abrasive grains so that the performance and efficiency of the wheel is optimized. 2 Limited time offer Subject to conditions All prices are per disc E.O. & E. E15

3 XTK35CROSS THE ORIGINAL XTRA THIN GRINDING & CUTTING The XTK35 CROSS delivers extra thin precise cutting and light grinding with one disc For steel, stainless steel & nuclear One wheel - THREE Operations: cuts, light grinds & deburrs Eliminates changing wheels = fewer work interruptions Extremely safe due to 3 full layers of fibreglass reinforcing Available in 4 1/2 & 5 For steel / stainless steel / nuclear applications XTK35 CROSS 5/64" x 7/8" A A ONLINE DEMO ciecanada.com op uq Three full layers of reinforcing composing the XTK35 Cross guarantees high stability and maximum on the job safety. XTK cie@ciecanada.com 3

4 GRINDING WHEELS KSM ALPHALINE For steel Very aggressive wheel for carbon steel Long life with fast metal removal RS63 PROLINE For steel & stainless steel X-TRA long life New formulation of bonding & grain mixtures Very FAST metal removal 1/4" x 7/8" A A A All Rhodius grinding wheels and cross wheels have 3 full layers of reinforcing for strength and safety. 1/4" x 7/8" A A A RS2 PROLINE For steel & stainless steel Smooth grinding Longer life - faster metal removal RS24 TOPLINE For aluminum/ non-ferrous metals Does not clog or load up High stock removal and good life 1/4" x 7/8" A A A A /4" x 7/8" A A A XTK35 CROSS For steel, stainless steeland nuclear 1 wheel 3 operations Cuts, light grinds and deburrs Eliminates changing wheels Extremely safe due to 3 full layers of fibre glass reinforcing 5/64" x 7/8" A A Limited time offer Subject to conditions All prices are per disc E.O. & E. E15

5 XTRA THIN CUTTING WHEELS Let the wheels do the cutting. Excessive pressure reduces wheel life and puts extra load on your grinder. N E W For steel or stainless steel Low development of burrs High cutting speed Long lifetime Cool cut XT67 / XTK67 XT70 / XTK70 ALPHALINE 4 1/2" A A x 7/8" A A /1 x 7/8" A A A A x 7/8" A A A /1 x 7/8" A A A A A A x 7/8" A A A A /64" x 7/8" A A XT24 XT MINI 3/64" x 3/8" TOP LINE For aluminum No clogging Long lifetime Cool cut 5/64" x 3/8" 21/2" A A A /1 x 7/8" 5/64" x 1/4" For steel, stainless steeland nuclear 1 wheel 3 operations Cuts, light grinds and deburrs Eliminates changing wheels Extremely safe due to 3 full layers of fibre glass reinforcing For steel, stainless steel & nuclear Designed for use on a die grinder Reaches the smallest corners and hard to access spots Iron and sulphur-free TOP LINE XTK35 CROSS XT / XTK For steel, stainless steel and nuclear Powerful disc Extremely accurate Fast cut - superior life For steel or stainless steel Long life & fast cutting times For thin walled tubes & profiles, sheet metal Reliable and precise Outstanding price-performance ratio TOP LINE PROLINE 3/64" x 7/8" 1/1 x 7/8" 4 1/2" A A A A cie@ciecanada.com

6 HEAVY DUTY WHEELS ST34 FTK33 PROLINE For steel or stainless steel PROLINE For steel or stainless steel Suitable for solid material, pipes and profiles, hardened steels, or stainless steel alloys Tough - a must for heavy applications High cutting speed Smooth cutting & long life Quick, easy cutting Minimal burr build up Designed for chop saws up to 3 H.P. Reinforced both sides 3/32" x 7/8" CHOP SAW WHEELS A A /8" x 7/8" A A A A /32" x 1" 12" 14" A A /8" x 1" A A GAS SAW WHEELS For steel Hard robust wheel Easy cutting & long life External fibreglass reinforced External heavy duty reinforcing both sides 20mm 7/8" 12" X 1/8" A A " X 3/1 A A FT40 FT30 PROLINE PROLINE For concrete, stone and asphalt Free cutting Silicon carbide grain hard wheel 2 full layers of reinforced external fibreglass 1" 20mm A A " A BLENDING & FINISHING FS1 FUSION Specially Designed For Grinding And Fillet Welds Combines the long life of a grinding disc with the fine grinding pattern of a flap disc. Fillet weld treatment x7/8" Edge grinding 40G High stock removal No clogging Cool grinding x3/1 A31801 A31802 A x1/4" x3/1 x1/4" A A A A A A A A A All Rhodius abrasives are manufactured to the European OSA Standard for safety and quality. Limited time offer Subject to conditions All prices are per disc E.O. & E. E15

7 FLAP DISCS Rhodius flap discs are designed to wear right down. No need to trim! LSZ F2 ALPHALINE UBER VALUE For steel, stainless steel, nuclear applications, plastic and wood Optimum angle for maximum metal removal Super value LSZ F Also available in flat TOPLINE TOP PERFORMANCE For steel, stainless steel, nuclear applications, plastic and wood Cool grinding Long life x7/8" angled 40G C C C C C C x7/8" angled 40G C C C C C C C C C Optical check when grinding LSZ F VISION For steel, stainless steel, nuclear applications, plastic and wood Unique to Rhodius Cooler grinding reduces heat build up and discolouration Abra x7/8" angled 40G C C C C C C Are You A Visionary? ONLINE DEMO ciecanada.com See through your workpiece! VISION cie@ciecanada.com 7

8 WIRE BRUSHES SHAFT MOUNTED BRUSHES NEVER EXCEED THE MAX RPM INDICATED ON THE BRUSH! Too much pressure applied during the operation of the brush against the work piece can result in premature wear of the brush, reduced brush life, and possible broken wire filaments. Ideally during the brushing application you should only apply sufficient pressure to keep the brush in contact with the workpiece and remove the desired product. WHAT TO DO IF: X Brushing results are too weak Increase the peripheral speed of the brush by increasing the brush diameter Use a brush with a shorter trim length Use a brush with a larger diameter wire filament Use a twist knot brush if currently using crimped wire brush Brushing results are too aggressive Reduce the peripheral speed of the brush by reducing either the RPM or using a smaller diameter brush Use a brush with a longer trim length or a smaller diameter filament size Use a crimped wire brush if currently using a twist knot brush TWIST KNOT END CRIMPED CIRCULAR CRIMPED WIRE END Durable brush ideal for paint, slag, burr removal 1/4" shank Removes corrosion and paint 1/4" shank High resistance wire perfect for frontal applications 1/4" shank 3/4" 11/4" 3/4" 11/4" 15/8" 2" 15/8" 2" 5/8" 3/4" 5/8" 3/4" length 11/4" 11/4" length 11/4" 11/4" length 1/2" 1/2" 5/8" length 1/2" 1/2" 5/8" length 1" 1" length 1" 1".0".0".0".0" G G G G G G G G G G G G G G Limited time offer Subject to conditions All prices are per brush Limited quantities E.O. & E. E15

9 CUP BRUSHES WIRE BRUSHES WIRE WHEEL BRUSHES CRIMPED WIRE CUP For light removal of paint, rust, etc. No aggressive scoring of the workpiece.012".012" G /8-11 G G TWIST KNOT BEVEL BRUSH Simply incredible for tough applications Angle brush for hard to reach areas Providing the convenience of both a cup and wire brush 4".01 G /8-11 G G TWIST KNOT CUP Heavy duty removal of rust, paint, weld splatter, etc. Tight twist gives extra long life G /8-11 G TWIST KNOT WHEEL Excels on large diameter pipe for cleaning of root and cap welds Extra long life, heavy duty construction 2-3 times the life of the competition G G G /8-11 G G G TWIST KNOT BRIDLED CUP Tight twist and bridle give aggressive action for removal of heavy spatter, rust, etc. When worn down simply "knock off" the bridle to expose more brush length 4" 4" G G /8-11 G12202 G12204 STRINGER BEAD Designed for narrow root passes and restricted access applications Heavy duty construction gives extra long life G G G /8-11 G12200 G G cie@ciecanada.com 9

10 LASER LEVELS CONSTRUCTION LASERS autocross 3 KIT NAUTILUS IPX7 NEW BMI succeeds in combining tradition and innovation as highlighted by their way into laser levelling. Since 1993, BMI has been one of the leading manufacturers in this technology. SELF LEVELLING WATERPROOF unilaser AHV KIT PULSED SELF-LEVELLING CROSSLINE LASER Self levelling crossline laser Horizontal and verticle lines can be switched on separately Can also be used with optional receiver by pulsed laserdiodes Includes hardshell transport case to protect unit L2654KLPP Horizontal operation Indoor/outdoor range with receiver 500 m (1500') Robust aluminium casing Shock protection 2.6mm/30m (0.1"/ 98') accuracy ONLINE DEMO ciecanada.com automagic SELF LEVELLING CONSTRUCTION LASER For horizontal and vertical applications with plumb beams up and down Indoor/outdoor range with receiver 300 m (00 ft) Complete set with receiver and remote control in a stable plastic storage and transport case L AHV SET K3 topomat IPX5 Lockable 90 tilting joint SELF LEVELLING ONE PERSON OPERATION RAINPROOF ONLINE DEMO ciecanada.com CROSSLINE AND 5 BEAM LASER ALL IN ONE Self levelling mechanism Automatic out-of-level sensing No beam shaking when bumped 5 laser beams at a time Indoor/outdoor range with optional receiver 50 m (150') Accuracy 3mm/m (.12"/ 32') L2654KLP5SP Automatic laser-stop function in case of change in position Horizontal/vertical operation remote control Indoor/outdoor range with receiver 500 m (1500') Shock protection 2.6mm/30m (0.1"/ 98') accuracy Includes carrying bag L264803AHSET Includes robust carrying case and inclinometer L264802NSET Limited time offer Subject to conditions All prices are per brush Limited quantities E.O. & E. E15

11 NEW FLEXTOP tip made of transparent, highly flexible plastic; reliably prevents breakage at the tape commencements. TAPE MEASURES For all steel measuring tapes 13mm, pull ring made of break-proof plastic, 2 notches for weights. BHF: Hookring with FLEXTOP tip, measurement commencement B. RADIUS case mm/inch White Enamelled Concave, tempered springblade steel with anticorrosive phosphate coating SCRATCH RESISTANT White Enamelled Isolan Large crank arm and park position Easy grip soft touch surface Slide bearing shells for highest winding comfort Transparent, highly flexible plastic Carbon steel Yellow synthetic resin, polyamide coating Isolan Can be modified from right-hand to left-hand operation in no time 20m 30m L BHF L BHF 20m 30m L BHF L BHF BASIC frame ERGOLINE frame mm/inch Frame style varies according to order number mm/inch Frame style varies according to order number 30m 50m 0m 30m 50m SCRATCH RESISTANT White Enamelled L BHF L BHF L BHF SCRATCH RESISTANT White Enamelled L BHF L BHF High impact plastic frame Flextop prevents the nortorious breakage of the highly stressed first cm of the tape 30m 50m 30m 50m Isolan L BHF L BHF Park position for crank arm and tape commencement ring Ball bearings for highest winding convenience Ergonomically shaped frame with easy to grip, soft rubber protrusions Isolan L BHF L CHF cie@ciecanada.com 11

12 LEVELS Winkelstar is unique to BMI. It's ideal for drywall and ceramics. WINKELSTAR MULTIPLE ANGLE SQUARE Foldable multiple angle square can be adjusted between 0 and 270 Angles can be fixed in 15 steps. Built-in vials enable it to be used as a spirit level. Easy to transport. Hand wheel to adjust ease of movement & locking of angle Short Arm 2 ONLINE DEMO ciecanada.com NON MAGNETIC MAGNETIC 2' x 2' 2' x 4' L L ' x 2' 2' x 4' L M L M TRAPEZOID TORPEDO Great for all construction trades 2 vials Heavy weight, very high torsion-resistance trapezoid shaped aluminum die cast level Red powder-coated body Measuring accuracy 1.0 mm/m normal position 12" MAGNETIC L TM TORPEDO Ideal for drywall, construction and scaffold erection Top end vial excellent for vertical measurements 2 Ultrasonic welded vials (magnifying) Highly accurate inverted measurement 0.5mm/m Vial with MAGNIFYING effect means No more double bubble trouble NON MAGNETIC MAGNETIC 8" L " " L M L16920M 12 Limited time offer Subject to conditions All prices are per brush Limited quantities E.O. & E. E15

13 SPIRIT LEVELS Eurostar with 2% slope excels in applications requiring water drainage or run off i.e. concrete pads, walkways etc. 2 % slope EUROSTAR ROBUST Best suited for piping, fitting, plumbing, concrete and ceramic installation Sturdy box design 2" x 3/4" with 1/1 wall thickness 2 % slope markings ideal for plumbing, concrete and ceramic installations Laser marked vials provide 0.5mm/m accuracy for a lifetime Reflection free vials, no more double bubble trouble MASONS FRIEND 2' 4' 6' Tough 4 chamber profile - 2mm thick 2 stainless steel strips (1 with graduation) Ultrasonically welded vials (magnifying) Accuracy 0.5mm/m in normal or inverted position Black anodized NON MAGNETIC L E L E L E 2' 4' 6' 4' MAGNETIC L EM L EM L EM NON MAGNETIC L E Strongest on the Market! Designed for the job site, all construction applications and renovation projects EXTRA STRONG 4 chamber profile - 2mm thick a must for the professional Original BMI domed round vial with magnifying effect in regular or inverted postion Highest accuracy for life due to BMI patented ultrasonically welded vials 2' 4' 6' Models containing the letter D have hand holes NON MAGNETIC L L D L D 2' 4' 6' MAGNETIC L M L DM L DM cie@ciecanada.com 13

14 CLAMPS ALL NEW "M" SERIES CLAMPS ALL STEEL FITTER CLAMPS MEDIUM DUTY FITTER'S CLAMP OPENING 8" " 12" 1 20" 24" THROAT KEY FEATURES INCLUDE SPECIAL PRESSURE PAD Screw-on type, tilts < 35, gun metal finish, easily replaceable ECONOMICAL CLAMPING PRESSURE 1800 lb 1800 lb 1800 lb 1800 lb 1800 lb 1800 lb REPLACEABLE PRO PAD tilts < 35 DROP-FORGED, HEAT TREATED GALVANIZED SLIDING ARM J J34730 J J J J "M" SERIES CLAMP ANTI-SLIP DEVICE OPENING HEAVY DUTY " 12" 20" 24" 31" 40" 60" EXTRA HEAVY DUTY 12" 1 20" 24" 31" 40" HEAVY DUTY FITTER'S CLAMP " 12" 20" 31" 50" OPENING OPENING THROAT 5 1/2" 5 1/2" 5 1/2" THROAT CLAMPING PRESSURE 5 1/2" 5 1/2" 5 1/2" 5 1/2" CLAMPING PRESSURE SERIES CLAMP THROAT CLAMPING PRESSURE J34750M J M J M J M J M J34750M J M SERIES CLAMP J M J M J M J M J M J34800M J34750 J J J J34751 EXTRA HEAVY DUTY FITTER'S CLAMP Turnus has been manufacturing clamps for over 150 years. OPENING 12" 1 20" 24" THROAT CLAMPING PRESSURE J J J J REPLACEABLE PRO PAD tilts < Limited time offer Subject to conditions All prices are each E.O. & E. E15

15 Standard Quality AFR FIBRE DISCS Environmentally friendly for a safer working conditions Steel Special aluminum oxide full resin fibre discs Excels in a wide variety of applications No harmful additives for a safer working environment For mild steel, cast iron and structural steel APPLICATION Heavy duty sanding Weld removal Sheet metal Steel plates x 7/8" x 7/8" x 7/8" C C C C C C C G 36G 50G 0G 120G High Performance ZFR C C C C11852 C C C G 36G 50G 0G 120G Steel / Zirconia full resin bonded fibre discs Sharpens itself in use Cool grinding action reduces glazing and loading For mild steel, cast iron and structural steel C C C C C C C APPLICATION Heavy duty sanding Weld removal Sheet metal Steel plates Edge deburring 24G 36G 50G 0G 120G Most cost effective when used with turbo back pad due to cooling effect x 7/8" x 7/8" x 7/8" C C C C C G 36G 50G C C C C C G 36G 50G C C C C C G 36G 50G FLEXIBLE ADVANTAGES High quality backing pad Suitable for heavy duty use Flexible Extremely wear resistant BACKING PADS TURBO ADVANTAGES Heavy duty back pad Extra cooling ribs and air vents provide cooling action Air flow cooling action extends life of the disc Especially effective on stainless steel and alloys For steel, stainless steel & non-ferrous metals ARBOUR For steel, stainless steel & non-ferrous metals ARBOUR 5/8-11" 5/8-11" 5/8-11" C C C /8-11" 5/8-11" 5/8-11" C C C cie@ciecanada.com 15

16 Measuring Instruments, Levels, Tape Measures & Construction Lasers New M Series Clamps, All Steel Fitter Clamps & Red Grip Pliers Carbide Burrs, Fibre Discs & Backing Pads CLYDE INDUSTRIAL EQUIPMENT cie@ciecanada.com