SUZUKI MULTI FUNCTION GAUGE

Transcription

1 SUZUKI MULTI FUNCTION GAUGE SUZUKI MULTI FUNCTION GAUGE is specialized in synthetically reading basic functions for cruising and able to indicate directions and direct distance to homeport and destination. This gauge can be easily connected to SUZUKI MODULAR INSTRUMENT SYSTEM (SMIS). MODEL NAME AND ENGINE NUMBER model number DF300A 30002S-3000~ DF250A 25003P-3000~ DF250T 25003F-3000~ DF250Z 25003Z-3000~ DF225T 22503F-3000~ DF225Z 22503Z-3000~ DF200T 20002F-3000~ DF200Z 20002Z-3000~ DF75T 7502F-3000~ DF75Z 7502Z-3000~ DF50T 5002F-3000~ DF50Z 5002Z-3000~ DF40AT 4002F-3000~ model number DF40AZ 4002Z-3000~ DF5AT 502F-3000~ DF5AZ 502Z-3000~ DF00A 0002F-3000~ DF90A 09003F-3000~ DF80A 08002F-3000~ DF70A 07003F-3000~ DF60A 06002F-3000~ DF50A 05003F-3000~ DF40A 04003F-3000~ DF20A 02002F-3000~ DF5A 0504F-3000~ DF9.9B 00995F-3000~ SUZUKI MOTOR CORPORATION reserves the right to add any improvement to change the design or to discontinue any item at any time without notice. Some items might not be compatible with local standards or statutory requirements. Please check with your local AUTHORIZED SUZUKI DEALER for details at the time of ordering. Acutual colors might differ from those appearing in this catalogue. c 202 SUZUKI MOTOR CORPORATION. All rights reserved. July 202. Part number: N TAKATSUKA-CHO, MINAMI-KU, HAMAMATSU CITY, JAPAN

2 MULTI FUNCTION GAUGE The 4.3 inch thin-film transistor liquid crystal color display manages up to dual s information by one display and read all basic information for cruising. The gauge can indicate directions of homeport and destination so that helmsman infers present location. Moreover, it indicates various critical warning information such as low battery voltage, error, low oil pressure and overheat. MULTI FUNCTION GAUGE L0-000 Modes of display Full display mode Tachometer, shift position, speedometer, trim gauge, GPS time, trip hour, distance to homeport and destination, navigation compass, fuel manager, fuel gauge Navigation display mode Navigation compass, distance to homeport and destination, latitude and longitude, trip hour, GPS time Engine information display mode Total hour, hour after oil change, voltmeter, coolant water temperature Limited display mode Tachometer, shift position, speedometer, fuel gauge, GPS time, navigation compass, trim gauge Fuel information display mode Fuel level of each tank, fuel flow, fuel consumption per hour, sailing distance per litter or gallon, distance to homeport and destination 2

3 GAUGE ADAPTER & GPS RECEIVER MODULE & WIRE COMP. TO NMEA NETWORK & POWER CABLE GAUGE ADAPTER L DF9.9BR/5AR/20AR/40AT-250T/Z GPS RECEIVER MODULE L GAUGE ADAPTER L0-000 For drive-by-wire models DF250A/300A WIRE COMP. TO NMEA NETWORK L POWER CABLE J meters long J meters long 3

4 Example of connection for DF250A/300A with SUZUKI multi function gauge DF250A/DF300A SINGLE NOTE *:The minus (-) side of the battery is used commonly with the battery, or connect to GND. *2:Analog tank sender can be used commonly with NMEA tank sender. (Only up to 4 pieces as the maximum) NMEA tank sender setting up has to be carried out by SMIS gauge. In case of setting up more than two NMEA tank senders, add the position information by SMIS gauge. (Ex.: PORT/STBD) If not added, non addition may result in impossibility of recognition or in anomaly of indication. *3:In case of connecting with, the priority is given to. *4:Displayable items of and are the following:engine revolutions, trimming angle, temperature, battery voltage, ground speed, time and position information. *5:While some of SMIS items have a T-connector in a package, the total of the T-connector coming with them does not always satisfy the required quantity. * * DF250A/DF300A DUAL *3 *4 *2 * Ref No. Part name Part number Single Dual with SMIS Quantity of T-connector (*5) SUZUKI multi function gauge L GPS receiver module L Gauge adapter L Active hub power harness 2.5 meters J Active hub power harness 6.0 meters J NMEA network wire L SMIS power cable with a T-connector L Fluid level sensor with a T-connector L Terminator female L T-connector L Terminator male L " SMIS multi-function gauge L " SMIS multi-function gauge L Gauge adapter L GPS receiver module L Terminal set D Extention cable 2 feet L Extention cable 6 feet L Extention cable 5 feet L Extention cable 25 feet L

5 Example of connection for DF9.9BR/5AR/20AR/40AT-250T/Z with SUZUKI multi function gauge DF9.9BR/5AR/20AR/40AT-250T/Z SINGLE NOTE *:Connections are made only for those types equipped with a trim sender. *2:Replacement of SDS connector for is required. *3:The minus (-) side of the battery is used commonly with the battery, or connect to GND. *4:Analog tank sender can be used commonly with NMEA tank sender. (Only up to 4 pieces as the maximum) NMEA tank sender setting up has to be carried out by SMIS gauge. In case of setting up more than two NMEA tank senders, add the position information by SMIS gauge. (Ex.: PORT/STBD) If not added, non addition may result in impossibility of recognition or in anomaly of indication. *5.In case of connecting with, the priority is given to. *6.Displayable items of and are the following:engine revolutions, trimming angle, temperature, battery voltage, ground speed, time and position information. *7:While some of SMIS items have a T-connector in a package, the total of the T-connector coming with them does not always satisfy the required quantity. *3 *4 *5 *6 DF9.9BR/5AR/20AR/40AT-250T/Z DUAL Ref No. Part name Part number Single Dual with SMIS Quantity of T-connector (*7) SUZUKI multi function gauge L GPS receiver module L Gauge adapter L Active hub power harness 2.5 meters J Active hub power harness 6.0 meters J NMEA network wire L SMIS power cable with a T-connector L Fluid level sensor with a T-connector L Terminator female L T-connector L Terminator male L " SMIS multi-function gauge L " SMIS multi-function gauge L Gauge adapter L GPS receiver module L Terminal set D Extention cable 2 feet L Extention cable 6 feet L Extention cable 5 feet L Extention cable 25 feet L