...one that provides boaters with the utmost in excitement and satisfaction.

Transcription

1

2 * Always wear a lifejacket when boating and a kill cord when operating an outboard....one that provides boaters with the utmost in excitement and satisfaction. We, Suzuki, have spent an enormous amount of time on the water comparing, developing, and testing outboards, and just plain enjoying boating. So long ago we concluded that the ultimate outboard is one that gives the user a sense of excitement and satisfaction. To that end, we focus our time, energy, knowledge, skills, and the most advanced technologies at our disposal, exploring and developing technologies and designs that give our outboards a superior edge, whether it be in the form of improved performance, greater durability, higher fuel efficiency, or quieter operation. We will be continued challenge towards new technological innovations and higher target so that we can provide you with the ultimate experience on the water. 0 03

3 Dear Suzuki Dealer, Quality. Dependability. Innovation. Everything that you expect from your outboard motors is delivered with style by SUZUKI. Demand no less from the products that you choose to enhance your total boating pleasure. Demand SUZUKI GENUINE ACCESSORIES. This catalogue represents our commitment to provide you with the finest products available. From our classic line of matching instruments and gauges to our custom-engineered propellers and rigging items, you can depend on SUZUKI GENUINE ACCESSORIES for optimum performance. Take a few minutes to browse through this catalogue, and then be sure to contact your AUTHORIZED SUZUKI DISTRIBUTOR for further information. Thank you. SUZUKI MOTOR CORPORATION TABLE OF CONTENTS ONE THAT PROVIDES BOATERS WITH THE UTMOST IN EXCITEMENT AND SATISFACTION SUZUKI MULTI-FUNCTION GAUGE COMPONENT OF SUZUKI MULTI-FUNCTION GAUGE SUZUKI KEYLESS START SYSTEM ANALOG INSTRUMENT ELECTRONIC THROTTLE AND SHIFT SYSTEM COMPONENT OF SUZUKI PRECISION CONTROL MECHANICAL REMOTE CONTROL SYSTEM COMPONENT OF MECHANICAL REMOTE CONTROL SYSTEM STEERING ELECTRICAL PARTS FUEL SYSTEM PROPELLER CARE & MAINTENANCE ITEM SUZUKI MAINTENANCE S ANODE MERCHANDISE Recommended STEERING SYSTEM APPLICATION CHART MODEL NAME AND ENGINE NUMBER NOTE : Items and their part numbers showing in this catalogue are basically applicable to models of following engine numbers. Please consult your local dealers regarding other models and their rigging-parts and accessories. model DF300AP DF0AP DF0T DF0Z DFT DFZ DF00T DF00Z engine number 3000P-7000~ 003P-7000~ 003F-7000~ 003Z-7000~ 03F-7000~ 03Z-7000~ 000F-7000~ 000Z-7000~ model DF00AP DF00AT DF00AZ DF7AP DF7T DF7Z DF0AP DF0T engine number 0003P-7000~ 0003F-7000~ 0003Z-7000~ 703P-7000~ 70F-7000~ 70Z-7000~ 003P-7000~ 00F-7000~ model DF0Z DF40AT DF40AZ DFAT DFAZ DF00AT DF90A DF80A engine number 00Z-7000~ 4003F-7000~ 4003Z-7000~ 03F-7000~ 03Z-7000~ 0003F-7000~ 09003F-7000~ 08003F-7000~ model DF70A DF60A DF60AV DF0A DF0AV DF40A DF30A DFA engine number 07003F-7000~ 0600F-7000~ 06003F-7000~ 0003F-7000~ 0004F-7000~ 04003F-7000~ 03003F-7000~ 004F-7000~ model DFA DF9.9B DF9.9A DF8A DF6A DFA DF4A DF. engine number 004F-7000~ 0099F-7000~ 00994F-7000~ 0080F-7000~ 00603F-7000~ 0003F-7000~ 00403F-7000~ 00F-7000~ model DT40W DT40WK DT30 DTK DTA DTAK DT9.9A DT9.9AK engine number ~ 0400K-7000~ ~ 003K-7000~ ~ 003K-7000~ ~ 00993K-7000~ REFERENCE Part Number Gauge Size Background Maximum Speed kph mph knots -digit alpha-numerical number shows Part Number to be used for ordering. Shows the size ( or 4 ) of the gauge. Shows a main color of display panel on the front of a gauge. Shows typical or recommended models of ENGINES that RIGGING-PARTS and ACCESSORIES can be installed to. Shows maximum speed that SPEEDOMETER displays. Kilometers Per Hour Miles Per Hour Knots 04 0

4 SUZUKI MULTI-FUNCTION GAUGE DISPLAY VARIATIONS Analog Tacho & Speed Mode Analog Speed Mode (Night) Analog Tacho Mode Digital Tacho & Speed Mode Digital Tacho Mode (Night) Fuel Mode L-000 GAUGE ASSY, MULTI MAIN FEATURES HIGH PERFORMANCE Multi-Function Gauge displays a wide variety of information such as engine rpm, speed, trim angle, as well as diagnostics based on digital data received from the outboard motor. Gauges offer great reliability utilizing Suzuki s original warning system to provide the operator with accurate warning information. NMEA000 terminal offers compatibility with a wide range of marine equipment by other manufacturers. * SUPERIOR VISIBILITY Suzuki s next generation standard equipment gauge offers easy to use multi-function operation with superior readability. Easy to see, easy to read, easy to understand display offers a variety of modes including day and night modes and digital or analog readouts. COMPACT Compact, highly versatile gauge requires an 8mm hole for mounting, making them the perfect replacement for 4-inch analog gauges. * * NMEA000 is an NMEA (National Marine Electronics Association) standard communication protocol used for exchanging data between marine control units. * 4-inch gauges that require 8mm mounting holes (as researched by Suzuki). INFORMATION ANALOG TACHO & SPEED MODE Engine position Engine rpm Ground or Water Fuel Trim Shift Time Warning Indicator * Speed sensor or GPS module will be required in order to display the speed. Speed* TACHO MODE Fuel flow [l/h, gph] (instantaneous) Mileage [km/l, mpg] (instantaneous and average) Trip time [h], Trip distance [km, M, NM] Engine hour, Voltage, Water temp and more Tips Multi-Function gauge can be Used for multiple engines Used for single engine Used in multiple gauge for single engine How are you going to use it? SPECIFICATIONS 3. Color display Size: 0mm(W) 0mm(H) 6mm(D) Diagnostic display Easy installation and setup Φ8mm hole & large resin nut Includes protective cover NMEA000 output Applicable models: DF9.9B-DF300AP Design and specifications may change without notice due to improvements in performance and function. Protective cover (34-96L00-000) 06 07

5 SUZUKI MULTI-FUNCTION GAUGE SUZUKI MULTI-FUNCTION GAUGE for MECHANICAL SINGLE SUZUKI MULTI-FUNCTION GAUGE for MECHANICAL DUAL TO MAIN WIRING * 3P st CENTER Basic Kit L4 A. GAUGE When using GPS module (or water speed) L4 A. GAUGE L00 B. CABLE L0 ( L00 + GPS. Receiver Module When using Water Speed) TO MAIN WIRING (PORT) * 3P * nd 4 Basic Kit L A. GAUGE When using GPS module L A. GAUGE L0 ( L00 GPS. Receiver Module When using Water Speed) * 6 7 When using DF9.9B-DF30A L P PORT STBD nd 6 7 Basic Component In addition to component of [MECHANICAL SINGLE] Basic Component 6 7 GAUGE ASSY, MULTI WIRE COMP, GAUGE POWER WIRE COMP, EXTENSION ASSY, NETWORK POWER CONNECTOR COMP, BRANCH TO MAIN WIRING (STBD) 3P 3 ADAPTER, GAUGE FOR MULTI UNIT COMP, RESISTOR FEMALE UNIT COMP, RESISTOR MALE SUZUKI MULTI-FUNCTION GAUGE for MECHANICAL SINGLE *( )parts are required when using GPS module or water speed. *< >part are required when using with DF9.9B to 30A. ADAPTER COMP, GAUGE SENSOR ASSY, PADDLE WHEEL GPS RECEIVER MODULE A. GAUGE B. CABLE Total Required Quantity PART NUMBER PART NAME LENGTH L L A (+ B) <+ 8 > L-000 GAUGE ASSY, MULTI J m - - WIRE COMP, GAUGE POWER J m L m - WIRE COMP, EXTENSION L m - - () L ASSY, NETWORK POWER - - () L CONNECTOR COMP, BRANCH - - () L UNIT COMP, RESISTOR FEMALE - - () L0-000 UNIT COMP, RESISTOR MALE - - () L0-000 ADAPTER COMP, GAUGE - - 4A L SENSOR ASSY, PADDLE WHEEL () 4B L0-000 GPS RECEIVER MODULE () L SMFG, ADAPTER <> Total Required A. GAUGE Quantity PART NUMBER PART NAME LENGTH L-000 A (+4) L-000 GAUGE ASSY, MULTI J m - WIRE COMP, GAUGE POWER J m L ADAPTER, GAUGE FOR MULTI L m WIRE COMP, EXTENSION L m L ASSY, NETWORK POWER L CONNECTOR COMP, BRANCH L UNIT COMP, RESISTOR FEMALE L0-000 UNIT COMP, RESISTOR MALE L0-000 ADAPTER COMP, GAUGE - 4A L SENSOR ASSY, PADDLE WHEEL - - () 4B L0-000 GPS RECEIVER MODULE - - () SUZUKI MULTI-FUNCTION GAUGE for MECHANICAL DUAL *( )parts are required when using GPS module or water speed. ADDITIONAL GAUGE COMPONENTS Total Total PART NUMBER PART NAME LENGTH Required Required L-000 GAUGE ASSY, MULTI L m WIRE COMP, EXTENSION L m L CONNECTOR COMP, BRANCH L-000 WIRE COMP, DUAL GAUGE ADAPTER L0-000 WIRE, GAUGE EXT - - Please use " L0-000 WIRE, GAUGE EXT" as an extension between "340-96L" and " L"

6 SUZUKI MULTI-FUNCTION GAUGE SUZUKI MULTI-FUNCTION GAUGE for SUZUKI PRECISION CONTROL SINGLE COMPONENT LIST SINGLE STATION TO BCM 3P 6P * st CENTER COMPONENT GAUGE CABLE DUAL STATION PART NUMBER PART NAME LENGTH L L L L-000 GAUGE ASSY, MULTI J0-000 WIRE COMP, GAUGE POWER 6.0m E WIRE COMP, GAUGE EXT 6.4m L0-000 WIRE COMP, EXTENSION 0.6m L ASSY, NETWORK POWER L CONNECTOR COMP, BRANCH L UNIT COMP, RESISTOR FEMALE L0-000 UNIT COMP, RESISTOR MALE L ADAPTER, GAUGE POWER L ADAPTER COMP, GAUGE L ADAPTER COMP, DUAL STATION DUAL STATION TO BCM st CENTER st STATION nd STATION nd CENTER Optional Component list 3P 6 6P * 6P 4P 8 4 4P J WIRE COMP, GAUGE POWER.m L0-000 WIRE COMP, EXTENSION.8m L WIRE COMP, EXTENSION 4.7m L WIRE COMP, EXTENSION 7.6m 4A L SENSOR ASSY, PADDLE WHEEL 4B L0-000 GPS RECEIVER MODULE In addition to component of [SINGLE STATION] 4 WIRE COMP, GAUGE EXT Component Parts 6 7 GAUGE ASSY, MULTI WIRE COMP, GAUGE POWER WIRE COMP, EXTENSION ASSY, NETWORK POWER CONNECTOR COMP, BRANCH TOTAL REQUIREMENT LIST SUZUKI MULTI-FUNCTION GAUGE for SUZUKI PRECISION CONTROL (S.P.C) SINGLE Total Required Quantity SINGLE STATION SINGLE STATION SINGLE STATION (Using Water Speed) (Using GPS module) DUAL STATION DUAL STATION PART NUMBER PART NAME (Using Water Speed) L6-000 GAUGE L CABLE L-000 DUAL STATION DUAL STATION (Using GPS module) L L WIRE COMP, EXTENSION A L SENSOR ASSY, PADDLE WHEEL B L0-000 GPS RECEIVER MODULE UNIT COMP, RESISTOR FEMALE UNIT COMP, RESISTOR MALE ADAPTER COMP, GAUGE SENSOR ASSY, PADDLE WHEEL GPS RECEIVER MODULE 0

7 SUZUKI MULTI-FUNCTION GAUGE SUZUKI MULTI-FUNCTION GAUGE for SUZUKI PRECISION CONTROL DUAL COMPONENT LIST TO BCM 3P * 6P st PORT COMPONENT GAUGE DUAL STATION PART NUMBER PART NAME LENGTH L L L-000 GAUGE ASSY, MULTI J0-000 WIRE COMP, GAUGE POWER 6.0m E WIRE COMP, GAUGE EXT 6.4m L0-000 WIRE COMP, EXTENSION 0.6m L ASSY, NETWORK POWER L CONNECTOR COMP, BRANCH L UNIT COMP, RESISTOR FEMALE L0-000 UNIT COMP, RESISTOR MALE L ADAPTER, GAUGE POWER L ADAPTER COMP, GAUGE L WIRE COMP, GAUGE ADAPTER L ADAPTER COMP, DUAL STATION Optional Component list st nd st STBD J WIRE COMP, GAUGE POWER.m L0-000 WIRE COMP, EXTENSION.8m L WIRE COMP, EXTENSION 4.7m L WIRE COMP, EXTENSION 7.6m 4A L SENSOR ASSY, PADDLE WHEEL 4B L0-000 GPS RECEIVER MODULE L-000 WIRE COMP, GAUGE ADAPTER Component Parts TOTAL REQUIREMENT LIST SUZUKI MULTI-FUNCTION GAUGE for SUZUKI PRECISION CONTROL (S.P.C) DUAL Total Required Quantity SINGLE STATION SINGLE STATION SINGLE STATION (Using Water Speed) (Using GPS module) DUAL STATION DUAL STATION PART NUMBER PART NAME (Using Water Speed) L7-000 GAUGE L-000 DUAL STATION L-000 GAUGE ASSY, MULTI L0-000 WIRE COMP, EXTENSION L CONNECTOR COMP, BRANCH DUAL STATION (Using GPS module) L L WIRE COMP, EXTENSION A L SENSOR ASSY, PADDLE WHEEL B L0-000 GPS RECEIVER MODULE L-000 WIRE COMP, GAUGE ADAPTER L ADAPTER COMP, DUAL STATION GAUGE ASSY, MULTI UNIT COMP, RESISTOR FEMALE WIRE COMP, GAUGE POWER UNIT COMP, RESISTOR MALE WIRE COMP, EXTENSION ADAPTER COMP, GAUGE ASSY, NETWORK POWER SENSOR ASSY, PADDLE WHEEL CONNECTOR COMP, BRANCH GPS RECEIVER MODULE 3

8 SUZUKI MULTI-FUNCTION GAUGE SUZUKI MULTI-FUNCTION GAUGE for SUZUKI PRECISION CONTROL TRIPLE COMPONENT LIST TO BCM 3P * 6P st PORT COMPONENT A. GAUGE B. DUAL STATION PART NUMBER PART NAME LENGTH L L L-000 GAUGE ASSY, MULTI J0-000 WIRE COMP, GAUGE POWER 6.0m E WIRE COMP, GAUGE EXT 6.4m L0-000 WIRE COMP, EXTENSION 0.6m L ASSY, NETWORK POWER L CONNECTOR COMP, BRANCH L UNIT COMP, RESISTOR FEMALE L0-000 UNIT COMP, RESISTOR MALE L ADAPTER, GAUGE POWER L ADAPTER COMP, GAUGE L WIRE COMP, GAUGE ADAPTER L ADAPTER COMP, DUAL STATION st CENTER Optional Component list st nd st STBD J WIRE COMP, GAUGE POWER.m L0-000 WIRE COMP, EXTENSION.8m L WIRE COMP, EXTENSION 4.7m L WIRE COMP, EXTENSION 7.6m 4A L SENSOR ASSY, PADDLE WHEEL 4B L0-000 GPS RECEIVER MODULE L-000 WIRE COMP, GAUGE ADAPTER Component Parts TOTAL REQUIREMENT LIST SUZUKI MULTI-FUNCTION GAUGE for SUZUKI PRECISION CONTROL (S.P.C) TRIPLE Total Required Quantity SINGLE STATION SINGLE STATION SINGLE STATION (Using Water Speed) (Using GPS module) DUAL STATION DUAL STATION PART NUMBER PART NAME (Using Water Speed) L7-000 GAUGE L-000 DUAL STATION L-000 GAUGE ASSY, MULTI L0-000 WIRE COMP, EXTENSION L CONNECTOR COMP, BRANCH DUAL STATION (Using GPS module) L L WIRE COMP, EXTENSION A L SENSOR ASSY, PADDLE WHEEL B L0-000 GPS RECEIVER MODULE L-000 WIRE COMP, GAUGE ADAPTER L ADAPTER COMP, DUAL STATION GAUGE ASSY, MULTI UNIT COMP, RESISTOR FEMALE WIRE COMP, GAUGE POWER UNIT COMP, RESISTOR MALE WIRE COMP, EXTENSION ADAPTER COMP, GAUGE ASSY, NETWORK POWER SENSOR ASSY, PADDLE WHEEL CONNECTOR COMP, BRANCH GPS RECEIVER MODULE 4

9 SUZUKI MULTI-FUNCTION GAUGE SUZUKI MULTI-FUNCTION GAUGE for SUZUKI PRECISION CONTROL QUADRAPLE COMPONENT LIST TO BCM (PORT SIDE) 3P * PORT STBD 6P 3 st nd st PORT st C.PORT COMPONENT GAUGE DUAL STATION PART NUMBER PART NAME LENGTH L L L-000 GAUGE ASSY, MULTI J0-000 WIRE COMP, GAUGE POWER 6.0m E WIRE COMP, GAUGE EXT 6.4m L0-000 WIRE COMP, EXTENSION 0.6m L ASSY, NETWORK POWER L CONNECTOR COMP, BRANCH L UNIT COMP, RESISTOR FEMALE L0-000 UNIT COMP, RESISTOR MALE L ADAPTER, GAUGE POWER L ADAPTER COMP, GAUGE L WIRE COMP, GAUGE ADAPTER L ADAPTER COMP, DUAL STATION - - 4P TO BCM (STBD SIDE) 3P 6P nd st st C.STBD Optional Component list J WIRE COMP, GAUGE POWER.m L ADAPTER, GAUGE FOR MULTI L0-000 WIRE COMP, EXTENSION.8m L WIRE COMP, EXTENSION 4.7m L WIRE COMP, EXTENSION 7.6m 4A L SENSOR ASSY, PADDLE WHEEL 4B L0-000 GPS RECEIVER MODULE st STBD TOTAL REQUIREMENT LIST SUZUKI MULTI-FUNCTION GAUGE for SUZUKI PRECISION CONTROL (S.P.C) QUADRAPLE Total Required Quantity SINGLE STATION SINGLE STATION SINGLE STATION (Using Water Speed) (Using GPS module) DUAL STATION DUAL STATION PART NUMBER PART NAME (Using Water Speed) L7-000 GAUGE L-000 DUAL STATION DUAL STATION (Using GPS module) L-000 GAUGE ASSY, MULTI L ADAPTER, GAUGE FOR MULTI E WIRE COMP, GAUGE EXT L0-000 WIRE COMP, EXTENSION L CONNECTOR COMP, BRANCH L L WIRE COMP, EXTENSION L ADAPTER COMP, GAUGE L WIRE COMP, GAUGE ADAPTER 4A L SENSOR ASSY, PADDLE WHEEL B L0-000 GPS RECEIVER MODULE L ADAPTER COMP, DUAL STATION Component Parts 6 7 GAUGE ASSY, MULTI UNIT COMP, RESISTOR FEMALE WIRE COMP, GAUGE POWER UNIT COMP, RESISTOR MALE WIRE COMP, EXTENSION ADAPTER COMP, GAUGE ASSY, NETWORK POWER SENSOR ASSY, PADDLE WHEEL CONNECTOR COMP, BRANCH GPS RECEIVER MODULE 6 7

10 COMPONENT OF SUZUKI MULTI-FUNCTION GAUGE POWER CABLE CONNECTION HARDWARE NMEA000 compatible sensors or other devices are able to use by the use of T-connectors throughout the system. GAUGE ADAPTER TRIM METER WIRE EXTENSION CABLE POWER CABLE WITH T-CONNECTOR L The fused (3A) lead connects the extension cable to the power source. T-CONNECTOR L L E L0-000 T-connectors link all compatible cables, data and sensor devices, and can be easily secured L m L meters L0-000 TERMINATOR FEMALE TERMINATOR MALE GAUGE POWER ADAPTER.8 meters GAUGE ADAPTER ACTIVE HUB POWER L meters L L L meters 0-ohm terminators are required for any open cable ends in the system. T-connectors link all compatible cables, data and sensor devices, and can be easily secured. SENSORS L J For using multiple SMFGs.m L J0-000 SPEED SENSOR WITH T-CONNECTOR GPS RECEIVER MODULE WITH T-CONNECTOR DUAL STATION ADAPTER 6.0m DUAL GAUGE ADAPTER WIRE GAUGE ADAPTER WIRE GAUGE EXTENSION WIRE L L L L Paddle wheel-type speed sensor. 0ft cable L0-000 Displays the accurate location and speed on Multi-Function Gauges. 8 9

11 SUZUKI KEYLESS START SYSTEM HIGH SECURITY Suzuki original engine starting system features an immobilizer function for added peace of mind. IC access codes installed in the key-fob and engine must match for the engine to start. This prevents starting the engine with the wrong key making the system a good theft deterrent as well. EASY OPERATION Suzuki original engine starting system offers a variety of functions. The key-fob is easy to carry and one is all you need to enjoy stress-free starts for greater boating pleasure. One step ahead of the competition, the Suzuki Keyless Start System requires no mechanical key so the key-fob remains safely in your pocket. Basic Component MAIN SWITCH KEYLESS CONTROL BUZZER PANEL 3 UNIT 4 KEYLESS FOB WATERPROOF FLOAT KEY-FOB The easy to carry key-fob remains safely in your pocket reducing risk of a lost key. The key-fob is waterproof and floats so should it ever go overboard it is retrievable KEYLESS CONTROL KEYLESS CAN CAN EXTENSION KEYLESS RELAY ASSY KEY-FOB Find out more by watching our videos BUZZER Communication Area <m MAIN SWITCH PANEL 9 0 KEYLESS PARTS HOLDER CDI UNIT HOLDER CUSHION MAIN UNIT DF00AP Reffer to the next page for details 0

12 SUZUKI KEYLESS START SYSTEM SUZUKI KEYLESS START SYSTEM for SUZUKI PRECISION CONTROL (S.P.C) SUZUKI KEYLESS START SYSTEM for MECANICAL REMOTE CONTROL SYSTEM Resistor (for Keyless system) Resistor (for keyless system) Remote control wire (P/no J0*/*/6*) 6 Keyless CAN harness (P/no L0*) Main switch panel (P/no L0*) 0 E / F / Keyless control harness (P/no L0*) G Resistor (for SPC system) Resistor (for keyless system) 6 Keyless CAN harness (P/no L*) Sub-battery cable (P/no J*) 8 L K A / / / / / / / N B ECM Power relay (P/no L0*) 3 Keyless control unit (P/no L0* or L*) 0 Buzzer (P/no J9*) Main switch panel (P/no L*) Caution buzzer (P/no J9*) 8 3 Relay assy, KLS (P/no L0*) Keyless control unit (P/no L0* or L*) Keyless control harness (P/no L*) Resistor (for Keyless system) Buzzer (P/no J9*) Basic Component MAIN SWITCH KEYLESS BUZZER PANEL 3 KEYLESS FOB CONTROL UNIT 4 KEYLESS CONTROL KEYLESS CAN CAN EXTENSION RELAY ASSY, KLS KEYLESS PARTS HOLDER CDI UNIT HOLDER CUSHION SUZUKI KEYLESS START SYSTEM for Total Required Quantity CONTROLLER SET SET SUZUKI PRECISION CONTROL (S.P.C) L L0 SINGLE DUAL TRIPLE QUAD PART NUMBER PART NAME LENGTH L L MAIN SWITCH PANEL J BUZZER L0-000 KEYLESS CONTROL UNIT L L L0-000 KEYLESS FOB L0-000 KEYLESS CONTROL L KEYLESS CAN L CAN EXTENSION L RELAY ASSY, KLS L0-000 HOLDER, KLS PARTS F HOLDER, CDI UNIT J CUSHION CLAMP, KLS L DECAL, KLS L03 (433.9MHz) or L3 (3MHz) SUZUKI KEYLESS START SYSTEM for Total Required Quantity CONTROLLER SET SET MECANICAL REMOTE CONTROL SYSTEM L L0 SINGLE DUAL PART NUMBER PART NAME LENGTH L L MAIN SWITCH PANEL L J BUZZER L0-000 KEYLESS CONTROL UNIT L L L0-000 KEYLESS FOB L0-000 KEYLESS CONTROL L0-000 KEYLESS CAN L CAN EXTENSION L RELAY ASSY, KLS L0-000 HOLDER, KLS PARTS L ASSY, DUAL KLS ENG L0-000 WIRE COMP, KLS CAN EXT F HOLDER, CDI UNIT J CUSHION L DECAL, KLS L03 (433.9MHz) or L3 (3MHz) 3

13 ANALOG INSTRUMENT Caution lamp Caution type CHECK ENGINE Low battery-voltage or Other cautions on S.D.S TEMP Overheat ( Over-revolution ) Caution lamp Caution type OIL Low oil-pressure ( Over-revolution ) Oil change reminder REV LIMIT Over-revolution TACHOMETER SPEEDOMETER White Black White Black White Black White Black White Black J J Gauge Size 4 (White) (Black) J J Gauge Size 4 (White) (Black) J J0-000 Gauge Size 4 (White) (Black) (White) J-000 Gauge Size 4 Maximum Speed 30km/h, 80mph (Black) J (White) J3-000 Gauge Size 4 Maximum Speed 80km/h, 0mph (Black) J0-000 DFA-0 Caution system alert with a monitor lamp lighting on when an abnormal engine condition occurs. Refer to SERVICE MANUAL for the detail. DF40A-40A/00A Exclusive for SUZUKI Troll Mode System. Automatically switches to low RPM scale when the SUZUKI Troll Mode System is activated. DF8A-30A, DT30/40W Full-scale 7000-RPM TACHOMETER can be used on electricstart models by using 4, 6 or pole switch on rear of meter. Bourdon-tube type speedometer with readings in km/h and mph. Includes vinyl tube, hardware and installation manual. Bourdon-tube type speedometer with readings in km/h and mph. Includes vinyl tube, hardware and installation manual. TRIM GAUGE FUEL GAUGE HOUR METER White Black White J J Gauge Size DFA-0 (White) (Black) Black White J J0-000 Gauge Size (White) (Black) DF8A-0, DT30/40 Black White Black J J Gauge Size (White) (Black) DF8A-0, DT30/40 (White) J-000 Gauge Size 4 Maximum Speed 80km/h, 4knots SPEEDOMETER SENDER ASSY (Black) J Bourdon-tube type speedometer with readings in km/h and knots. Includes vinyl tube, hardware and installation manual J Gauge Size 4 Background White Maximum Speed 0km/h, 6knots Bourdon-tube type speedometer with readings in km/h and knots. Includes vinyl tube, hardware and installation manual. Magnetic-type gauge shows trim angle for optimum performance and efficiency. FUEL GAUGE alone works with the US Standard 0Ω sending unit. Use the 0Ω adaptor to connect the gauge to a European standard sending unit. -Volt-electric-motor driven meter indicates hours that your SUZUKI OUTBOARD MOTOR has been operated in order for you to know when each periodic service is required. VOLTMETER WATER-PRESSURE GAUGE D INSTALLATION for WATER-PRESSURE GAUGE White Black White Black J J Gauge Size (White) (Black) DF8A-0, DT30/40 To help your SUZUKI OUTBOARD MOTOR run at its best, monitor the charging system functioning with a VOLTMETER J J0-000 Gauge Size DF40A-0 (White) (Black) Bourdon-tube type gauge measures cooling-water pressure. Select an appropriate INSTALLATION for each model J J DF40A-40A DF0-7/00A J DF00-0 includes fittings and hoses needed for motor to gauge connection. 4

14 SUZUKI PRECISION CONTROL REMOTE- for SINGLE ENGINE SINGLE STATION Basic Component TO GAUGE R/C BOX BINNACLE MOUNT R/C BOX FLUSH MOUNT R/C BOX CONTROL PANEL TO ENGINE 3 ST STATION DUAL STATION ND STATION (for KEYLESS START TROLL MODE SWITCH 3 MAIN SWITCH PANEL SYSTEM) 4 PANEL BUZZER TO GAUGE BOAT CONTROL MODULE BCM HOLDER (L) BCM HOLDER (R) BCM CONNECT CAP BCM CUSHION + - TO ENGINE (R) REMOTE- for SINGLE ENGINE PART NUMBER PART NAME LENGTH st Station nd Station JE J JF JL0-000 FLUSH-MOUNT ND-STATION ND-STATION FLUSH-MOUNT J BINNACLE MOUNT R/C BOX J-000 FLUSH MOUNT R/C BOX J-000 CONTROL PANEL J MAIN SWITCH PANEL L TROLL MODE SWITCH PANEL J WARNING BUZZER WARNING BUZZER CLAMP J-000 BOAT CONTROL MODULE J BCM HOLDER (L) J BCM HOLDER (R) BL0-000 BCM-CONNECT CAP J BCM CUSHION J TERMINAL RESISTOR J0-000 BATTERY-LEAD J0-000 BCM # WIRING J DUAL-STATION WIRING J0-000 BCM # WIRING J EMERGENCY SWITCH PANEL CLAMP J m MAIN WIRING * J m J0-000 MAIN WIRING EXTENSION.0m SINGLE STATION Total Required Quantity DUAL STATION BCM # WIRING DUAL-STATIION WIRING 7 TERMINAL RESISTOR 8 BATTERY-LEAD BCM # WIRING HAR NESS (L) EMERGENCY SWITCH PANEL MAIN WIRING MAIN WIRING EXTENSION *3 is not included in these kits. Please purchase these items separately. 6 7

15 SUZUKI PRECISION CONTROL REMOTE- for DUAL ENGINE REMOTE- for TRIPLE ENGINE SINGLE STATION SINGLE STATION STBD CENTER PORT STBD TO GAUGE 3 4 TO ENGINE 7 TO GAUGE 3 TO ENGINE TO ENGINE TO ENGINE TO ENGINE PORT Installation Parts Different from SINGLE ENGINE Installation Parts Different from SINGLE ENGINE R/C BOX EMERGENCY SWITCH CONTROL PANEL BINNACLE MOUNT R/C BOX PANEL ENGINE WIRING R/C BOX EMERGENCY SWITCH CONTROL PANEL BINNACLE MOUNT R/C BOX PANEL ENGINE WIRING REMOTE- for DUAL ENGINE Total Required st Station nd Station Quantity JG JH0-000 PART NUMBER PART NAME LENGTH ND-STATION SINGLE DUAL STATION STATION J3-000 BINNACLE MOUNT R/C BOX J-000 CONTROL PANEL J MAIN SWITCH PANEL L TROLL MODE SWITCH PANEL J WARNING BUZZER WARNING BUZZER CLAMP J-000 BOAT CONTROL MODULE J BCM HOLDER (L) J BCM HOLDER (R) BL0-000 BCM-CONNECT CAP J BCM CUSHION J TERMINAL RESISTOR J0-000 BATTERY-LEAD J BCM # WIRING J DUAL-STATION WIRING J-000 BCM # WIRING J EMERGENCY SWITCH PANEL J ENGINE WIRING CLAMP J m - - MAIN WIRING * J m J0-000 MAIN WIRING EXTENSION.0m *3 is not included in these kits. Please purchase these items separately. REMOTE- for TRIPLE ENGINE Total Required st Station nd Station Quantity JJ JK0-000 PART NUMBER PART NAME LENGTH ND-STATION SINGLE DUAL STATION STATION J3-000 BINNACLE MOUNT R/C BOX J3-000 CONTROL PANEL J MAIN SWITCH PANEL L TROLL MODE SWITCH PANEL J WARNING BUZZER WARNING BUZZER CLAMP J-000 BOAT CONTROL MODULE J BCM HOLDER (L) J BCM HOLDER (R) BL0-000 BCM-CONNECT CAP J BCM CUSHION J TERMINAL RESISTOR J0-000 BATTERY-LEAD J BCM # WIRING J DUAL-STATION WIRING J-000 BCM # WIRING J EMERGENCY SWITCH PANEL J ENGINE WIRING CLAMP J m - - MAIN WIRING * J m J0-000 MAIN WIRING EXTENSION.0m *3 is not included in these kits. Please purchase these items separately. 8 9

16 SUZUKI PRECISION CONTROL REMOTE- for QUADRUPLE ENGINE SINGLE STATION EXTRA OPTIONS AND INFORMATION SUZUKI Precision Control and Lean Burn TO GAUGE STBD TO ENGINE TO ENGINE 4 4 TO ENGINE TO ENGINE STBD CENTER 7 7 LEAN BURN Fuel efficiency matters whether you re boating for pleasure or profit. Our Lean Burn Fuel Control Technology combined with Suzuki Precision Control, delivers the optimum fuel/air mixture to the engine. The system is designed to save fuel both at low speeds and up into the cruising range. COMPARISON OF FUEL ECONOMY DF300AP (LEAN BURN) km/l 4% GOOD Original DF300 Uses 4% less fuel compared to the original DF300, mainly in the cruising range where the engine is used a majority of the time PORT PORT CENTER rpm Trolling Cruising High-Speed Data used in the graph was obtained through in-house testing under uniformed conditions. Results will vary depending upon operating conditions (boat design, size, weight, weather, etc.) Installation Parts Different from SINGLE ENGINE R/C BOX EMERGENCY SWITCH CONTROL PANEL BINNACLE MOUNT R/C BOX PANEL REMOTE- for QUADRUPLE ENGINE PART NUMBER PART NAME LENGTH st Station nd Station J J8-000 ND-STATION ENGINE WIRING SINGLE STATION Total Required Quantity J3-000 BINNACLE MOUNT R/C BOX J-000 CONTROL PANEL J MAIN SWITCH PANEL L TROLL MODE SWITCH PANEL J WARNING BUZZER WARNING BUZZER CLAMP J-000 BOAT CONTROL MODULE J BCM HOLDER (L) J BCM HOLDER (R) BL0-000 BCM-CONNECT CAP J BCM CUSHION J TERMINAL RESISTOR J0-000 BATTERY-LEAD J BCM # WIRING J DUAL-STATION WIRING J-000 BCM # WIRING J EMERGENCY SWITCH PANEL J ENGINE WIRING CLAMP J m - - MAIN WIRING * J m J0-000 MAIN WIRING EXTENSION.0m DUAL STATION COUNTER SELECT CONNECTOR J0-000 TROLL MODE SWITCH PANEL L Counter-rotation DF40A-40A/00A/AP/ 0AP/ 300AP Activates SUZUKI Troll Mode System and controls RPM from idling engine speed up to 00rpm at every 0rpm. DF00AP/0AP/300AP Converts DF300AP/0AP to counter rotation specification. Regular rotation SUZUKI TROLL MODE SYSTEM Suzuki Selective Rotation In multi-outboard installations on large boats, a counter-rotation outboard is usually paired with a regular rotation model to help keep the boat traveling on an even keel and in a straight line. AP Models are built with special counter rotating gearing in the lower unit, which causes the prop to rotate in the opposite direction. Suzuki Selective Rotation eliminates the need to purchase a dedicated counterrotation outboard by using a special switch that when connected to a circuit inside of the engine compartment, turns a regular rotation outboard into a counter-rotation model with a counter rotational propeller.* This industry first is made possible through a special, unified design of gears, shaft, and bearings in the lower unit that are designed to operate reliably and efficiently in either regular or counter-rotation directions. * Make sure you consult with your dealer before changing Regular Rotation to Counter Rotation (or vice versa). An optional extra on Remote Control models from over DF40A, this easy-to-use system lets you adjust engine speed in 0rpm increments, giving highly precise control at low revs. With its own tachometer and control switch, it works alongside our multi-function gauges and analogue gauges. (Suzuki Troll Mode System is originally equipped with Tiller Handle models from over DF40A.) *Not Applicable for DF0,7,00,,0 *3 is not included in these kits. Please purchase these items separately. 30 3

17 SUZUKI PRECISION CONTROL REMOTE- for KEYLESS START SYSTEM REMOTE- for SINGLE ENGINE PART NUMBER PART NAME LENGTH J9-000 Single Station JC-000 FLUSH-MOUNT J BINNACLE MOUNT R/C BOX J-000 FLUSH MOUNT R/C BOX J-000 CONTROL PANEL L MAIN SWITCH PANEL L TROLL MODE SWITCH PANEL J WARNING BUZZER WARNING BUZZER CLAMP J-000 BOAT CONTROL MODULE J BCM HOLDER (L) J BCM HOLDER (R) BL0-000 BCM-CONNECT CAP J BCM CUSHION J TERMINAL RESISTOR J0-000 BATTERY-LEAD J0-000 BCM # WIRING CLAMP * J m - - MAIN WIRING J m J0-000 MAIN WIRING EXTENSION.0m *3 is not included in these kits. Please purchase these items separately. Total Required Quantity SINGLE STATION REMOTE- for TRIPLE ENGINE PART NUMBER PART NAME LENGTH st Station JB J3-000 BINNACLE MOUNT R/C BOX J3-000 CONTROL PANEL L MAIN SWITCH PANEL L TROLL MODE SWITCH PANEL J WARNING BUZZER WARNING BUZZER CLAMP J-000 BOAT CONTROL MODULE J BCM HOLDER (L) J BCM HOLDER (R) BL0-000 BCM-CONNECT CAP J BCM CUSHION J TERMINAL RESISTOR J0-000 BATTERY-LEAD J BCM # WIRING J ENGINE WIRING CLAMP 8 - * J m - MAIN WIRING J m J0-000 MAIN WIRING EXTENSION.0m L ASSY, KLS CAN - *3 is not included in these kits. Please purchase these items separately. Total Required Quantity SINGLE STATION REMOTE- for DUAL ENGINE PART NUMBER PART NAME LENGTH Single Station JA J3-000 BINNACLE MOUNT R/C BOX J-000 CONTROL PANEL L MAIN SWITCH PANEL L TROLL MODE SWITCH PANEL J WARNING BUZZER WARNING BUZZER CLAMP J-000 BOAT CONTROL MODULE J BCM HOLDER (L) J BCM HOLDER (R) BL0-000 BCM-CONNECT CAP J BCM CUSHION J TERMINAL RESISTOR J0-000 BATTERY-LEAD J BCM # WIRING J ENGINE WIRING CLAMP - * J m - MAIN WIRING J m J0-000 MAIN WIRING EXTENSION.0m L ASSY, KLS CAN - *3 is not included in these kits. Please purchase these items separately. Total Required Quantity SINGLE STATION REMOTE- for QUADRUPLE ENGINE PART NUMBER PART NAME LENGTH st Station JD J3-000 BINNACLE MOUNT R/C BOX J-000 CONTROL PANEL L MAIN SWITCH PANEL L TROLL MODE SWITCH PANEL J WARNING BUZZER WARNING BUZZER CLAMP J-000 BOAT CONTROL MODULE J BCM HOLDER (L) J BCM HOLDER (R) BL0-000 BCM-CONNECT CAP J BCM CUSHION J TERMINAL RESISTOR J0-000 BATTERY-LEAD J BCM # WIRING J ENGINE WIRING CLAMP 0 - * J m - MAIN WIRING J m J0-000 MAIN WIRING EXTENSION.0m L ASSY, KLS CAN 3 *3 is not included in these kits. Please purchase these items separately. Total Required Quantity SINGLE STATION 3 33

18 COMPONENT OF SUZUKI PRECISION CONTROL Applicable model DF0AP/7AP/00AP/0AP/300AP MAIN SWITCH PANEL BOAT CONTROL PANEL MAIN WIRING MAIN-WIRING- EXTENSION J meters for control system J meters for control system J-000 for Single-Engine J meters for control system ENGINE WIRING DUAL-STATION WIRING J-000 for Dual-Engine, Quadruple-Engine J for Dual-Engine J0-000 for Triple-Engine J for Dual-station control system J single ignition with Emergency-stop switch J3-000 for Triple-Engine BCM # WIRING BCM # WIRING BOAT CONTROL MODULE (BCM) BCM HOLDER (L/R) (R) J Holder (L) J0-000 for Single-Engine and Single (First) station J for Dual or Triple-Engine and Single (First) station J for Quadruple-Engine J0-000 for Single-Engine and Second station J-000 for Dual or Triple-Engine and Second station J for Quadruple-Engine and Second station J J0-000 for Quadruple-Engine (L) J Holder (R) BATTERY LEAD TERMINAL RESISTOR RIGGING TUBE BCM-CONNECT CAP BCM CUSHION BL J J meters J C DF70A-DF300AP 34 3

19 MECHANICAL REMOTE CONTROL SYSTEM REMOTE- for SINGLE ENGINE REMOTE- for DUAL ENGINE SINGLE ENGINE (a) (b) TO GAUGE Gauge Kit Component (a) TACHOMETER (FACE : WHITE) (b) TRIM GAUGE (FACE : WHITE) (a) (b) DUAL ENGINE (a) (b) TO R/C 4 3 TO GAUGE 3 3 TO GAUGE TO ENGINE TO ENGINE 4 TO ENGINE Basic Kit Component Basic Kit Component 3 4 R/C BOX BINNACLE MOUNT R/C BOX FLUSH MOUNT R/C BOX SINGLE IGNITION WITH E/S SWITCH MAIN WIRING R/C CABLE (ORT THROTTLE AND SHIFT CABLES) 3 4 BINNACLE MOUNT R/C BOX DUAL IGNITION WITH E/S SWITCH MAIN WIRING R/C CABLE (ORT THROTTLE AND SHIFT CABLES) REMOTE- for SINGLE ENGINE PART NUMBER PART NAME LENGTH L L J J J8-000 FLUSH-MOUNT FLUSH-MOUNT SIDE-MOUNT L BINNACLE MOUNT R/C BOX J FLUSH MOUNT R/C BOX J-000 SIDE MOUNT R/C BOX J4-000 SINGLE IGNITION WITH E/S SWITCH *A J m J-000 MAIN WIRING.0m J m (a) J-000 TACHOMETER (FACE : WHITE) - - (b) J-000 TRIM GAUGE (FACE : WHITE) J ft. /.44m J ft. / 3.0m J0-000 ft. / 3.66m J ft. / 4.7m R/C CABLE J ft. / 4.88m (ORT THROTTLE AND SHIFT CABLES) J ft. /.49m J ft. / 6.0m J ft. / 6.7m J ft. / 7.3m J0-000 m MAIN WIRING EXTENSION J m The high-lighted products are optional. Please make your best choice depending on your boat. *A The side mount control box is equipped with ignition switch, emergency switch and warning buzzer with clamp. Required SINGLE STATION L L PART NUMBER PART NAME LENGTH Required SINGLE STATION L0-000 BINNACLE MOUNT R/C BOX J4-000 DUAL IGNITION WITH E/S SWITCH J m J-000 MAIN WIRING.0m J m - - (a) J-000 TACHOMETER (FACE : WHITE) - (b) J-000 TRIM GAUGE (FACE : WHITE) J ft. /.44m J ft. / 3.0m J0-000 ft. / 3.66m J ft. / 4.7m R/C CABLE J ft. / 4.88m (ORT THROTTLE AND SHIFT CABLES) J ft. /.49m J ft. / 6.0m J ft. / 6.7m J ft. / 7.3m J0-000 m MAIN WIRING EXTENSION J m REMOTE- for DUAL ENGINE The high-lighted products are optional. Please make your best choice depending on your boat. Gauge Kit Component (a) (b) TACHOMETER (FACE : WHITE) TRIM GAUGE (FACE : WHITE) 36 37

20 MECHANICAL REMOTE CONTROL SYSTEM REMOTE- for SINGLE ENGINE (KEYLESS START SYSTEM) REMOTE- for DUAL ENGINE (KEYLESS START SYSTEM) REMOTE- for SINGLE ENGINE PART NUMBER PART NAME LENGTH L L JF JK JJ0-000 FLUSH-MOUNT FLUSH-MOUNT L BINNACLE MOUNT R/C BOX J FLUSH MOUNT R/C BOX L0-000 SIDE MOUNT R/C BOX SIDE-MOUNT L0-000 SINGLE IGNITION WITH E/S SWITCH *A J m J-000 MAIN WIRING.0m J m (a) J-000 TACHOMETER (FACE : WHITE) - - (b) J-000 TRIM GAUGE (FACE : WHITE) J ft. /.44m J ft. / 3.0m J0-000 ft. / 3.66m J ft. / 4.7m R/C CABLE J ft. / 4.88m (ORT THROTTLE AND SHIFT CABLES) J ft. /.49m J ft. / 6.0m J ft. / 6.7m J ft. / 7.3m J0-000 m MAIN WIRING EXTENSION J m The high-lighted products are optional. Please make your best choice depending on your boat. *A The side mount control box is equipped with ignition switch, emergency switch and warning buzzer with clamp. Required SINGLE STATION L L PART NUMBER PART NAME LENGTH Required SINGLE STATION L0-000 BINNACLE MOUNT R/C BOX L0-000 DUAL IGNITION WITH E/S SWITCH J m J-000 MAIN WIRING.0m J m - - (a) J-000 TACHOMETER (FACE : WHITE) - (b) J-000 TRIM GAUGE (FACE : WHITE) J ft. /.44m J ft. / 3.0m J0-000 ft. / 3.66m J ft. / 4.7m R/C CABLE J ft. / 4.88m (ORT THROTTLE AND SHIFT CABLES) J ft. /.49m J ft. / 6.0m J ft. / 6.7m J ft. / 7.3m J0-000 m MAIN WIRING EXTENSION J m L HARNSS ASSY,DUAL KLS ENG L0-000 WIRE COMP,KLS CAN EXT L HARNSS ASSY,KLS CAN REMOTE- for DUAL ENGINE The high-lighted products are optional. Please make your best choice depending on your boat

21 COMPONENT OF MECHANICAL REMOTE CONTROL SYSTEM REMOTE CONTROL BOX FLUSH-MOUNT REMOTE CONTROL BOX SIDE-MOUNT REMOTE CONTROL BOX REMOTE-CONTROL CABLE J feet.44 meters DF4A-0, DT30/40W J feet 4.7 meters DF4A-0, DT30/40W J feet 6.0 meters DF4A-0, DT30/40W L for Single-Engine DF8A L0-000 for Dual-Engine DF8A J for Single-Engine DF8A J0-000 for Single-Engine DF4A-6A J feet 3.0 meters DF4A-0, DT30/40W J feet 4.88 meters DF4A-0, DT30/40W J feet 6.7 meters DF4A-0, DT30/40W SPACER for REMOTE CONTROL BOX BATTERY LEAD J0-000 for Single-Engine. With warning buzzer DF8A-30A GENUINE REMOTE-CONTROL CABLES employ the latest in cable technology. The inner core is encased in nylon, and travels back and forth in a high-density polyethylene liner J0-000 feet 3.66 meters DF4A-0, DT30/40W J feet.49 meters DF4A-0, DT30/40W J feet 7.3 meters DF4A-0, DT30/40W L for Single Binnacle-mount type DF8A-0 MAIN WIRING J meters for Control system DF40A-0 IGNITION SWITCH PANEL L0-000 for Dual Binnacle-mount type DF8A J meters for Control system DF40A L meters for Control system DFA/30A J meters for Control system DF40A J meters DF70-90A/0/7/00A/ J meters DF70-90A/0/7/00A/ J meters for Control system without Monitor-signal wire, Trim-sender wire and PTT-SW wire DF8A/9.9B/A/0A L meters for Control system without Trim-sender wire and PTT-SW wire DFA/30A J-000 for Single-Engine. With PTT switch DF9.9B E for Single-Engine. With warning buzzer DT30/40W MAIN WIRING EXTENSION J meters for Control system DF9.9B J meters for Control system DF9.9B-0 EMERGENCY SWITCH PANEL REMOTE-CONTROL ATTACHING Converts ME model to REMOTE-CONTROL model L DF4A-6A TROLL MODE SWITCH PANEL L DFA/30A L0-000 DFATH/30ATH L DF9.9B/A/0A J0-000 CLAMP BRACKET SET (400-99J00-0EP) is required for installing J DF8A/9.9A L00-YAY DTK/ DT40W TWIN REMOTE-CONTROL ATTACHMENT DF8A-0, DT30/40W CLAMP BRACKET SET JL0-YAY DF8A/9.9A SUZUKI TROLL MODE SYSTEM RIGGING TUBE 990C DF70A-DF300AP *Connect to the hose adapter equipped on the engine J Single ignition DF9.39B E Single ignition DT J4-000 Single ignition with Emergency-stop switch DF9.9B J4-000 Dual ignition with Emergency-stop switch DF9.9B J DF9.39B-300AP E DT L DF40A-40A/00A/AP/ 0AP/ 300AP An optional extra on Remote Control models from over DF40A, this easy-to-use system lets you adjust engine speed in 0rpm increments, giving highly precise control at low revs. With its own tachometer and control switch, it works alongside our multi-function gauges and analogue gauges. (Suzuki Troll Mode System is originally equipped with Tiller Handle models from over DF40A.) *Not Applicable for DF0,7,00,,0 LIGHTING SWITCH PANEL PTT SWITCH PANEL WARNING BUZZER Activates SUZUKI Troll Mode System and controls RPM from idling engine speed up to 00rpm at every 0rpm J DF9.39B-0, DT30/40W J DF40A J DF9.39B-300AP 40 4

22 STEERING TILLER HANDLE DUAL-ENGINE TIE-BAR STEERING EXTENSION J for installation of DUAL-ENGINE TIE-BAR ( J00-000) DF J Stainless steel DF00A-40A J Stainless steel DF L-YAY L3-YAY DRAG-LINK DF40A/0A L-YAY DF60A/0AV/60AV DF70A-90A J33-YAY DF00A/A L0-000 DF70A-90A J DF40A-60A/ J DF0-7/00A/AP J0-000 DF00A-40A J DF0-7/00A/AP DTK/ J-000 DF40A-60A/ L DFA/30A Main features L0-000 DF70A-90A J0-000 DF8A-DF0A STEERING-BRACKET ATTACHMENT STEERING CABLE SEAL Tachometer with warning indicators Three-position angle adjustable bracket L DF70A/90A L DF40A-60A DF8A-0, DTK-40W Troll mode switch Activates SUZUKI Troll Mode System and controls RPM from idling engine speed up to 00rpm at every 0rpm. Power trim & tilt switch and throttle grip friction adjuster L DFA-30A J DF8A-0A DTK/30/40W 4 43

23 ELECTRICAL PARTS BATTERY CHARGING Optional equipment for charging Battery Required for : DF4A/A/6A, DF8A/9.9A, DF9.9B/A/0A, DFA/30A, DT9.9A/A, DTK, DT30, DT40W. ELECTRIC STARTER Optional materials for Converting Manual Starter model into Electric Starter model. * Electric Starter Kit functions as Battery charging Kit as well. Battery Charging Kit Charge Manual Starter Model Electric Starter kit Electric Starter Model Rectifier Set Receptacle Set Conversion Engine * Regulator is required for DT Models Battery *No Battery charging Function *Also functions as Battery charging Kit DF series DT series DF series DT series APPLICABLE MODEL BATTERY CHARGING RECTIFIER and REGULATOR SET RECEPTACLE L DF4A/A/6A L L J DF8A/9.9A 380-9J J L DF9.9B/A/0A L L DFA/30A L L L L (BRACKET) (BOLT) BATTERY CHARGING APPLICABLE MODEL RECTIFIER SET RECEPTACLE SET REGULATOR QTY REGULATOR ASSY, VOLTAGE STAY, VOLTAGE REGULATOR DT9.9A/A SCREW, VOLTAGE REGULATOR NUT, VOLTAGE REGULATOR WASHER, VOLTAGE REGULATOR LOCK WASHER, VOLTAGE REGULATOR REGULATOR ASSY, VOLTAGE DTK SCREW, VOLTAGE REGULATOR WASHER, VOLTAGE REGULATOR REGULATOR ASSY, VOLTAGE DT SCREW, VOLTAGE REGULATOR WASHER, VOLTAGE REGULATOR REGULATOR ASSY, VOLTAGE DT40W SCREW, VOLTAGE REGULATOR WASHER APPLICABLE MODEL ELECTRIC STARTER DF4A/A/6A - DF8A/9.9A DF9.9B/A/0A DFA/30A J L L0-000 APPLICABLE MODEL DT9.9A/A DT30 DT40W ELECTRIC STARTER REGULATOR QTY QTY CASE ASSY, FUSE REGULATOR ASSY, VOLTAGE 30-90L0-000 FLYWHEEL COMP, MAGNETO STAY, VOLTAGE REGULATOR ED MOTOR SET, STARTING SCREW, VOLTAGE REGULATOR SET, LIGHTING COIL NUT, VOLTAGE REGULATOR RECTIFIER SET WASHER, VOLTAGE REGULATOR LOCK L SET, STARTING CABLE & SWITCH WASHER, VOLTAGE REGULATOR ED MOTOR SET, STARTING REGULATOR ASSY, VOLTAGE FLYWHEEL COMP, MAGNETO SCREW, VOLTAGE REGULATOR RECTIFIER SET WASHER, VOLTAGE REGULATOR SET, STARTING CABLE & SWITCH PROTECTOR, STARTER CABLE BOLT, CABLE PROTECTOR CASE ASSY, FUSE REGULATOR ASSY, VOLTAGE ED MOTOR SET, STARTING SCREW, VOLTAGE REGULATOR 30-9L FLYWHEEL COMP, MAGNETO WASHER RECTIFIER SET SET, STARTING CABLE & SWITCH BATTERY CHARGING ELECTRIC STARTER BATTERY ISOLATOR LEAD SET Optional equipment for charging additional battery J-000 DF0T/Z/7T/Z/ 00A/AP/0AP/ 300AP 44 4

24 FUEL SYSTEM FUEL TANK FUEL CONNECTOR (ENGINE SIDE) FUEL-HOSE COMPONENT Engine Side (Outlet) Tank Side (Inlet) NOTE : These tanks do not meet US-EPA requirements B0-000 Plastic, DF4A B C A 3 D 4 E liter plastic tank with no fuel-level gauge DF4A/A/6A, DT9.9AK/ AK/K/40WK (-K:For Gasoline) FUEL CONNECTOR D0-000 Outer diameter: 3 mm, /4 NPT DF8A/R-40A, DT9.9/K-40W/WR/WK SQUEEZE PUMP (TANK SIDE) JD-000 for -liter plastic tank to engine J0-000 for fuel tank to engine DF4A-6A DF0-300AP FUEL-HOSE COMPONENT Chart 3 SQUEEZE PUMP 4 FUEL-HOSE COMPONENT FUEL-HOSE SOCKET Metal FUEL HOSE COMPONENT SOCKET HOSE Plastic HOSE FUEL-HOSE SOCKET Metal SOCKET D liter plastic tank with a fuel-level gauge L0-000 DF8A-40A, DT9.9AK-40W/WR/WK (-K:For kerosene) J-000 for -liter plastic tank to engine J4-000 for -liter plastic tank to engine DF8A-0A DF40A-40A Part Number A Length (mm) JD Material Plastic B I/D (mm) Part Number C Length (mm) I/D (mm) O/D (mm) SQUEEZE PUMP D Length (mm) I/D (mm) O/D (mm) J Large J Small.3 0. Material Metal E I/D (mm) Part Number J (no socket) - - (no hose) J Large (no socket) - - -liter plastic tank DF8A-0A D for -liter plastic tank to engine (gasoline) J Plastic J J Metal REPLACEMENT FUEL CAP NOTE : These caps do not meet US-EPA requirements for -liter tank with no fuel-level gauge 60-9D0-000 DFA-0A/R,DT9.9AK/AK/K/40WK for -liter tank with a fuel-level gauge DF8A-40A,DT9.9AK-40W/WR/WK FUEL-HOSE SOCKET Metal, Inner diameter:. mm J-000 DF4A-0A/R, DT9.9/K-40W/ WR/WK Plastic, Inner diameter: 6.6 mm DF4A/8A-30A J0-000 Small-in & Large-out J-000 Large-in & Large-out J-000 Large-in & Large-out L0-000 Large-in & Small-out DF4A-6A, DT9.9AK/AK/K/40WK DF8A-40A, DT9.9AK/AK/K/40WK SQUEEZE PUMP (Meets US-EPA requirements.) J0-000 Small-in & Large-out DF0-300AP DT9.9A/A/30/40W DF4A/6A J0-000 Large-in & Large-out for -liter plastic tank to engine (kerosene) with fuel filter (gasoline) with fuel filter (kerosene) Only for P36 ver. DT9.9AK/AK/K/40WK DT9.9AK/AK/K/40WK DT9.9AK/AK/K/40WK DT9.9AK/AK FUEL-HOSE COMPONENT (Meets US-EPA requirements.) J-000 DF4A/6A J-000 DF8A-30A L DF40A-60A J (no socket) - - (no hose) J D J J Metal Metal Metal Plastic Plastic Plastic J Metal Metal Metal J J J J J L (no socket) - - (no hose) J WATER SEPARATOR / FUEL FILTER ELEMENT SET Metal Metal Metal Metal, Inner diameter: 3.0 mm DF8A/R-40A, DT9.9AK-40W/WR/WK J0-000 Large-in & Large-out DF8A-A/30A DF0-300AP J DFA/DF8A-300AP, DT9.9A -40W/WR/WK J DFA/DF8A-300AP, DT9.9A -40W/WR/WK 46 47

25 PROPELLER What is PROPELLER Propeller selection is very important in the performance of your boat. Acceleration, speed, fuel efficiency, stability and engine RPM all are affected by the propeller selected. Operating requirements and conditions will also affect which design, style and pitch of propeller you may choose to meet your individual needs. The combination of boat, engine and appropriate propeller size may have already been tested by the boat manufacturer. Your Customer may need your assist with the process to determine the correct propeller for their application. Stainless Steel Propellers Suzuki Stainless Steel Propellers offer higher performance and greater durability than aluminum propellers. The aggressive design of these propellers enhances the overall performance of your boat and the durability of the stainless steel construction will give you long term dependability. Your Suzuki Stainless Steel propeller is also fitted with a rubber cushion hub to help absorb vibration and shock should you strike a foreign object. Propeller Sizing When referring to propeller size, such as 3 x 3 x 8, the first number is the number of blade, the second number details the diameter of the propeller and the third number is the pitch of the propeller. The pitch is the most significant number in the description. The diameter is usually predetermined by the propeller engineers and is based on the size and series of the engine. Pitch Pitch is used to describe the theoretical distance that a propeller cork screws through the water in inches of forward travel. In theory, an 8 pitch propeller would move ahead 8 with each complete revolution of a propeller. There is always some percentage of inefficiency as water conditions, boat weight and propeller style are introduced into the performance equation. The lower the slip factor, the more efficiently the propeller will perform and the faster the speed at a given engine RPM. Lower pitches accelerate faster, but have a lower top end speed. Higher pitches have a slower acceleration, but may attain higher top speeds. An inch of pitch generally is equal to 0-00 engine RPM at wide open throttle (WOT). If pitch is increased by an inch, RPM will decrease by 0-00 RPM at WOT. If pitch is decreased by an inch, RPM will increase by 0-00 RPM at WOT. Always operate your boat/engine combination within the recommended RPM range guidelines as stated in your operator s manual. Operating outside the recommended range can cause severe damage to your engine and may void the engine warranty. cup rake Diameter Diameter is considered to be the distance across an imaginary circle that is made when a propeller is rotated. Diameter is determined during the engineering process of designing a propeller and is usually based on requirements to meet the needs of engine size, gear case design, horsepower and speed. Propeller Cup Cup is used to reduce the slip and ventilation of the propeller. This will allow you to operate your engine at a higher transom mounting and allow you to use more trim for bow lift. The cup refers to the area along the trailing edge of the propeller blade that has an increased pitch in the last / of the blade surface and extends to the blade tip. Rake Rake is described as the angle, in degrees, that the propeller blades are mounted to the barrel of the propeller. The blades of a zero degree rake propeller are mounted perpendicular to the barrel of the propeller. The blades of a higher rake propeller angle more to the rear of the propeller. A propeller with a high rake design will hold the water on the blades longer during operation and will ventilate less at higher engine heights. High rake propellers will produce higher thrust that will help lift the bow of the boat more effectively. diameter pitch HARDWARE FOR PROPELLER STOPPER PROPELLER BUSH HARDWARE SPACER WASHER NUT COTTER PIN DF JL JA0-000 Press-IN N/A JL DF4A/A/6A L JL0-000 Press-IN N/A JL DF8A/9.9A J L Press-IN N/A DF9.9B/A/0A J L Press-IN N/A DT9.9A/A J L Press-IN N/A DFA/30A 763-9L L Press-IN L DT/ L L Press-IN L DF40A/0A/60A L0-000 Press-IN DT L L0-000 Press-IN L L DF0AV/60AV J J Press-IN J J DF70A/80A/90A L J Press-IN J J DF00A/A/40A 763-9J J Press-IN J J DF0-300AP L J0-000 Press-IN E D * 80-90J00 is for Lxx, Jxx, 800-9J4x~9J9x and 800-9JAx~9JDx. * 80-90J00 is for J0x~90J3x and 800-9J0x~9J3x. * J00 is for Jxx. * J0 is for Jxx, Lxx and Jxx. These bold letters indicate a proper part number in P34 & 3. Please refer to next pages

26 PROPELLER Model Type Material Blade Diameter Pitch Rotation* Description Part number DF. A0 Aluminum 3 7 3/8 3/8 RR 80-97JA0-09 DF4A C60 Aluminum 3 7 / 6 RR 80-9JL0-09 DFA C6 Aluminum 3 7 / 6 / RR 80-9JM0-09 DF6A C70 Aluminum 3 7 / 7 RR 80-9JN0-09 DF8A M70 Aluminum 3 9 /4 7 RR L00-09 DF9.9A M8 Aluminum 3 9 /4 8 RR THICK L40-09 M90 Aluminum 3 9 /4 9 RR L0-09 M9 Aluminum 3 9 /4 9 RR THICK L0-09 M00 Aluminum 3 9 /4 0 RR L60-09 M0 Aluminum 3 9 /4 0 RR THICK L-09 M0 Aluminum 3 9 /4 RR L70-09 DF9.9B Aluminum 4 0 RR High thrust JA-09 DFA Aluminum RR High thrust JB0-09 DF0A Aluminum 3 9 /4 7 RR L00-09 Aluminum 3 9 /4 8 RR THICK L40-09 DT9.9A Aluminum 3 9 /4 9 RR L0-09 DTA Aluminum 3 9 /4 9 RR THICK L0-09 Aluminum 3 9 /4 0 RR L60-09 Aluminum 3 9 /4 0 RR THICK L60-09 Aluminum 3 9 /4 RR L70-09 Aluminum 3 9 /4 RR L0-09 DFA P9 Aluminum 3 0 /4 9 RR THICK DF30A P00 Aluminum 3 0 /4 0 RR DT P0 Aluminum 3 0 /4 0 RR THICK DT30 P0 Aluminum 3 0 /4 RR P0 Aluminum 3 0 /4 RR 800-9L0-09 P Aluminum 3 0 /4 RR THICK P30 Aluminum 3 0 /4 3 RR 800-9L30-09 P3 Aluminum 3 0 /4 3 RR THICK P40 Aluminum 3 0 /4 4 RR 800-9D0-09 P0 Aluminum 3 0 /4 RR DF40A S900 Aluminum 3 / 9 RR L03-09 DF0A S000 Aluminum 3 / 0 RR L3-09 DF60A S00 Aluminum 3 / RR L3-09 DT40 S00 Aluminum 3 /8 RR LA0-09 S30 Aluminum 3 / 3 RR LB0-09 S400 Aluminum 3 3/8 4 RR L-09 S00 Aluminum 3 /4 RR L6-09 S600 Aluminum 3 /8 6 RR L7-09 S700 Aluminum 3 7 RR L83-09 SS600 Stainless 3 /8 6 RR L DF0AV Aluminum RR LG-09 DF60AV Aluminum 3 4 RR LH0-09 Aluminum 3 3 3/4 RR LJ0-09 Aluminum RR LA0-09 Aluminum 3 3 7/8 RR LB0-09 Aluminum 3 3 3/4 7 RR LC0-09 DF70A Aluminum RR LA0-09 DF80A Aluminum 3 3 7/8 RR LB0-09 DF90A Aluminum 3 3 3/4 7 RR LC0-09 Aluminum 3 3 3/4 9 RR LD0-09 Aluminum 3 3 3/4 RR LE0-09 Aluminum 3 3 3/4 3 RR LF0-09 Aluminum 3 3 / RR JE0-09 Aluminum RR JA0-09 Aluminum RR JB0-09 Aluminum 3 4 RR JC0-09 Aluminum RR JD0-09 Stainless 3 3 7/8 RR 800-9J Stainless 3 3 7/8 7 RR 800-9J0-000 Stainless 3 3 7/8 9 RR 800-9J Stainless 3 3 7/8 RR 800-9J Stainless 3 3 7/8 3 RR 800-9J Stainless 3 3 7/8 RR 800-9J Model Type Material Blade Diameter Pitch Rotation* Description Part number DF00A Aluminum 3 3 / RR JE0-09 DFA Aluminum RR JA0-09 DF40A Aluminum RR JB0-09 Aluminum 3 4 RR JC0-09 Aluminum RR JD0-09 Stainless 3 3 7/8 RR 800-9J Stainless 3 3 7/8 7 RR 800-9J0-000 Stainless 3 3 7/8 9 RR 800-9J Stainless 3 3 7/8 RR 800-9J Stainless 3 3 7/8 3 RR 800-9J Stainless 3 3 7/8 RR 800-9J Stainless 3 3 7/8 7 CR 800-9JA0-000 Stainless 3 3 7/8 9 CR 800-9JB0-000 Stainless 3 3 7/8 CR 800-9JC0-000 Stainless 3 3 7/8 3 CR 800-9JD0-000 DF0 Stainless 3 6 RR L DF7 Stainless RR L DF00 Stainless / RR L0-000 DF Stainless RR L0-000 DF0 Stainless 3 6 / RR L DF0AP Stainless RR L DF300AP Stainless / RR L0-000 Stainless RR L Stainless / RR L Stainless CR LE0-000 Stainless / CR LA0-000 Stainless CR LB0-000 Stainless 3 6 / CR LC0-000 Stainless CR LD0-000 Stainless / CR LF0-000 Stainless CR LG0-000 Stainless 3 / 7 RR J Stainless 3 /4 9 RR J0-000 Stainless 3 RR J0-000 Stainless 3 4 3/4 3 RR J Stainless 3 4 / RR J Stainless 3 4 / 7 RR J0-000 Stainless 3 4 / 7 CR JA0-000 Stainless 3 /4 9 CR JB0-000 Stainless 3 CR JC0-000 Stainless 3 4 3/4 3 CR JD0-000 Stainless 3 4 / CR JE0-000 Stainless 3 4 / 7 CR JF0-000 Stainless 4 /4 8 RR J Stainless 4 /4 0 RR J0-000 Stainless 4 /4 RR J0-000 Stainless 4 /4 4 RR J Stainless 4 /4 6 RR J Stainless 4 /4 0 CR JA0-000 Stainless 4 /4 CR JB0-000 Stainless 4 /4 4 CR JC0-000 Stainless 4 /4 6 CR JD0-000 *RR:Regular-Rotation model, CR:Counter-Rotation model 0

27 CARE & MAINTENANCE ITEM SUZUKI APPROVED GENUINE OIL ENGINE COVER Specialty designed oil for SUZUKI &4 stroke outboard motor. High quality stroke motor oil provide proper viscosity to be stability when temperature change and keep excellent oxidation. This 4 stroke outboard oil is formulated with special additives and high quality base oil. Outstanding performance for wear protection, viscosity stability, low volatility and excellent rust protection and corrosion. * Availability may differ in some regions. Please contact Thai Suzuki Motor Co, Ltd. for more information and making an order L DF/40A-60A, DT/ L DF70A-40A, DT L J DF8A-0A, DT9.9A-A J DF0T/Z-0T/Z DF0AP/300AP DF4A-0A DF DF40A-60A FLUSH-HOSE ATTACHMENT -CYCLE MOTOR OIL GEAR OIL -STROKE ENGINE OIL PREMIUM Mineral, liter SUZUKI APPROVED GENUINE OIL by MOTUL 4-STROKE ENGINE OIL PREMIUM SAE 0W-40, Mineral, SG, Equivalent to FC-W liter and liter Bottles are available L DF4A-6A/40A-60A,DT40W DF8A-300A CCI OIL Metal can with a cap & nozzle B-000 HYPOID GEAR OIL SAE90 API GL- 400ml These products are supplied directly by MOTUL. Please note that these oils are not available in some countries. Please contact with local distributor of MOTUL. GREASE PTT FLUID Suzuki and MOTUL have been in partnership in MotoGP since 988. Extending this trusted relationship led to the development of new Suzuki Marine Oils. These ranges of oils have excellent oxidation stability and provide outstanding rust protection under severe operating conditions. API Classification SAE Viscosity Grade SG SH SL SJ SM TEMP. 0W-40 0W-30 C F STROKE ENGINE OIL 4-STROKE ENGINE OIL SAE 0W-30 Semi-Synthetic SAE 0W-40 Semi-Synthetic liter, FC-W liter, FC-W SUPER GREASE-A 40 grams (.8 oz) for Crank oil seal WATER RESISTANT GREASE EP 40 grams (8.8 oz) MOLY PASTE 0 grams (.7 oz) Metal can with a cap liter LIQUID GASKET THREAD LOCK -STROKE ENGINE OIL (TC-W3) 4-STROKE ENGINE OIL (0W-40) High Performance T Engine OIL SAE 0W-40 Mineral liter, TC-W3 liter, FC-W * 4 kinds (L, L, 60L, 08L) of Engine oil volume and 3 kinds (0.3L, L, 60L) of Gear oil are available. Please ask your local MOTUL dealer. GEAR OIL SAE 90, API GL- 0.3 liter SILICONE SEAL KE4T 00 grams B (BLACK) 00 grams (3.4 oz) B (RED) 0 grams (.7 oz) (BLUE) 0 grams (.7 oz) 3

28 SUZUKI MAINTENANCE S SUZUKI highly recommends you to replace your outboard motor with Maintenance Kits every 00 hours or year, whichever comes first. ALL LINEUP For 4 STROKE OBM MODEL PART NUMBER PART NUMBER PART NAME QTY YEAR MODEL YEAR PART NUMBER PART NUMBER PART NAME QTY MODEL YEAR PART NUMBER PART NUMBER PART NAME QTY JM0-000 IMPELLER,WATER PUMP J0-000,WATER PUMP REPAIR L0-000,WATER PUMP REPAIR SPARK PLUG, CR6HSA 60-87J FILTER ASSY,OIL 60-6A3-000 FILTER ASSY, OIL(WAKO) COTTER PIN SPARK PLUG, BKR6E SPARK PLUG, DCPR6E GASKET,0X7X COTTER PIN,D:3.6,L: GASKET,.X0X. DF/. ('06~') J GASKET,DRAIN PLUG 3-87J ANODE,PROTECTION O RING DF0/ V ('06~) GASKET,0X7X GASKET,.X0X. 3-9J ANODE,PROTECTION DF70A/80A/90A ('09~) GASKET,9.X6.X 3-87J ANODE,PROTECTION COTTER PIN,D:3.6,L: PIN(.9X4) 3-87J ANODE,PROTECTION O RING,D:.9,ID: J PANEL, PUMP CASE UNDER O RING D:.4ID: KEY,WATER PUMP J GASKET, PUMP CASE PANEL O RING D:.9ID: L00 FUEL,FILTER JM0-000 IMPELLER,WATER PUMP 743-9J00 SLEEVE J-000,WATER PUMP REPAIR SPARK PLUG, CR6HSA 40-87J30 FUEL,FILTER 60-6A3-000 FILTER ASSY, OIL COTTER PIN,D:3.6,L: ,WATER PUMP REPAIR SPARK PLUG, BKR6E GASKET,0X7X J FILTER ASSY,OIL COTTER PIN,D:3.6,L: ALL LINEUP For STROKE OBM MODEL PART NUMBER PART NUMBER PART NAME QTY YEAR DT9.9/ (') DT9.9/ (A) ('3~) DT9.9K/K (') DT9.9K/K (A) ('3~) DTK (') DTK ('3~4) DTK ('~) DT30 (') DT30 ('3~4) DT30 ('~) DT40W/40WR ('07LATE~') DT40W/40WR ('3~) CHROMED WATER PUMP REPAIR SET GASKET,0X7X L ZINC,PROTECTION COTTER PIN SPARK PLUG,BR7HS D GASKET,THERMOSTAT COVER L0-000 WATER PUMP REPAIR SET J GASKET,DRAIN PLUG J ANODE,PROTECTION 3-90L ZINC,PROTECTION COTTER PIN CHROMED WATER PUMP REPAIR SET GASKET,0X7X L ZINC,PROTECTION COTTER PIN SPARK PLUG,B6HS 768-9D GASKET,THERMOSTAT COVER L0-000 WATER PUMP REPAIR SET J GASKET,DRAIN PLUG 3-87J ANODE,PROTECTION L ZINC,PROTECTION COTTER PIN SPARK PLUG,BR6HS D GASKET,THERMOSTAT COVER ,WATER PUMP REPAIR GASKET,0X7X SPARK PLUG,B7HS GASKET,THERMOSTAT COVER COTTER PIN,D:3.6,L: ZINC SET, PROTECTION ,WATER PUMP REPAIR GASKET,0X7X SPARK PLUG (NGK, B7HS-0) GASKET,THERMOSTAT COVER COTTER PIN,D:3.6,L: L0-000,WATER PUMP REPAIR J GASKET, DRAIN PLUG SPARK PLUG (B7HS-0) GASKET,THERMOSTAT COVER COTTER PIN,D:3.6,L: 3-87J ANODE,PROTECTION ,WATER PUMP REPAIR GASKET,0X7X SPARK PLUG,BR7HS GASKET,THERMOSTAT COVER COTTER PIN,D:3.6,L: ZINC SET, PROTECTION ,WATER PUMP REPAIR GASKET,0X7X SPARK PLUG (NGK, BR7HS-0) GASKET,THERMOSTAT COVER COTTER PIN,D:3.6,L: L0-000,WATER PUMP REPAIR J GASKET, DRAIN PLUG SPARK PLUG (BR7HS-0) GASKET,THERMOSTAT COVER COTTER PIN,D:3.6,L: 3-87J ANODE,PROTECTION ,WATER PUMP REPAIR GASKET,0X7X PLUG,SPARK,BR8HS GASKET,THERMOSTAT COVER COTTER PIN,D:3.6,L: ZINC SET, PROTECTION GASKET,THERMOSTAT COVER GASKET,0X7X COTTER PIN,D:3.6,L: PLUG,SPARK,BR8HS ,WATER PUMP REPAIR DF/. ('~) DF4//6 ('0~'0) DF4//6 ('~'6) DF4A/A/6A P0 DF4A/6A P03 ('7~) DF8A/9.9A ('0~) DF9.9/ ('~'3) DF9.9B/A/0A ('3~) J GASKET,DRAIN PLUG 3-87J ANODE,PROTECTION O RING PIN JL0 UNDER PANEL JL0 GASKET L0-000,WATER PUMP REPAIR COTTER PIN,D:3.6,L: SPARK PLUG, BPR6ES GASKET,0X7X J ANODE,PROTECTION 74-9JL0-000 PANEL, WATER PUMP CASE UPR 743-9JL0-000 SLEEVE, WATER PUMP CASE FUEL,FILTER L0-000,WATER PUMP REPAIR COTTER PIN,D:3.6,L: L SPARK PLUG, CPR6EA GASKET,0X7X J ANODE,PROTECTION 74-9JL0 PANEL 743-9JL0 SLEEVE FUEL,FILTER GASKET(X7X) PIN O RING(D:,ID:38.) KEY L PLUG,SPARK(CPR6EA-9) 60-6H-000 FILTER,ENGINE OIL 74-9JL0-000 PANEL,WATER PUMP CASE UPR JL0-000 SLEEVE,WATER PUMP CASE M0-000 IMPELLER,WATER PUMP PANEL,PUMP CASE UNDER 747-9J GASKET,PUMP CASE PANEL H FILTER,FUEL 3-87J0-000 ANODE,PROTECTION 3-9J ANODE,PROTECTION J GASKET,DRAIN PLUG FILTER,FUEL 60-4H0-000 FILTER ASSY,ENG OIL COTTER PIN O RING(D:.4,ID:.6) O RING(D:.9,ID:3) GASKET,X7X J GASKET,DRAIN PLUG 3-87J ANODE,PROTECTION O RING,D:.9,ID: SPARK PLUG, CR6E J0-000, WATER PUMP REPAIR J00 SLEEVE J00-000, WATER PUMP REPAIR COTTER PIN L SPARK PLUG, CPR6EA H0-000 FILTER ASSY,ENG OIL O RING(D:.4,ID:9.6) E ANODE,PROTECTION 3-90L ZINC,PROTECTION GASKET,X7X GASKET,0X7X J SLEEVE, WATER PUMP CASE FUEL,FILTER J0-000, WATER PUMP REPAIR COTTER PIN L SPARK PLUG, CPR6EA H0-000 FILTER ASSY,ENG OIL O RING(D:.9,ID:3) O RING(D:.4,ID:.6) 3-87J ANODE,PROTECTION O RING,D:.9,ID: GASKET,X7X J GASKET,DRAIN PLUG J00 SLEEVE, WATER PUMP CASE 40-87L00 FUEL,FILTER DF/30 ('0~'0) DFA/30A ('~) DF40/0 ('06LATE~'0) DF40A/0A/60A ('0~) DF0AV/60AV ('4~) DF60 ('09LATE~'09END) DF60/70 ('07) DF60/70 ('08~'09EARLY) SPARK PLUG, DCPR6E COTTER PIN,D:3.6,L: GASKET,0X7X GASKET,.X0X. 3-87J ANODE,PROTECTION 6-87E0-000 GASKET, PROTECTION COVER 40-87J0-000 FUEL,FILTER L00-000, WATER PUMP REPAIR COTTER PIN (D:3.6,L:) L SPARK PLUG (CPR6EA-9) JL0-000 FILTER ASSY, OIL J ANODE,PROTECTION O RING (D:.9,ID:.8) GASKET (X7X) J GASKET,DRAIN PLUG L SLEEVE, WATER PUMP CASE 40-87L FUEL,FILTER ,WATER PUMP REPAIR 60-87J FILTER ASSY,OIL SPARK PLUG, DCPR6E COTTER PIN,D:3.6,L: GASKET,0X7X GASKET,.X0X. 3-87J ANODE,PROTECTION O RING,D:.9,ID: J FILTER,FUEL L00-000,WATER PUMP REPAIR COTTER PIN,D:3.6,L: 60-87J FILTER ASSY,OIL SPARK PLUG, DCPR6E GASKET,.X0X GASKET,0X7X. 3-87J ANODE,PROTECTION O RING,D:.9,ID: L FILTER COMP,FUEL E0-000,WATER PUMP REPAIR COTTER PIN,D:3.6,L: 60-87J FILTER ASSY,OIL SPARK PLUG, DCPR6E GASKET,.X0X GASKET,0X7X. 3-87J ANODE,PROTECTION O RING,D:.9,ID: L FILTER COMP,FUEL E0-000,WATER PUMP REPAIR 60-87J FILTER ASSY,OIL SPARK PLUG, BPR6ES COTTER PIN,D:3.6,L: GASKET,0X7X GASKET,.X0X. 3-87J ANODE,PROTECTION 6-87E0-000 GASKET, PROTECTION COVER E0-000 SEALING, WATER PUMP CASE E-000 SLEEVE, WATER PUMP CASE 40-87J FILTER,FUEL E04-000,WATER PUMP REPAIR 60-87J FILTER ASSY,OIL SPARK PLUG, BPR6ES COTTER PIN,D:3.6,L: GASKET,0X7X GASKET,.X0X. 3-87J ANODE,PROTECTION 6-87E0-000 GASKET, PROTECTION COVER 40-87J FILTER,FUEL E0-000,WATER PUMP REPAIR 60-87J FILTER ASSY,OIL SPARK PLUG, BPR6ES COTTER PIN,D:3.6,L: GASKET,0X7X GASKET,.X0X. 3-87J ANODE,PROTECTION 6-87E0-000 GASKET, PROTECTION COVER E SEALING, WATER PUMP CASE NO E-000 SLEEVE, WATER PUMP CASE E SEALING, WATER PUMP CASE NO DF00/ ('0~') DF00A/A/40A ('3~) DF40 ('0~') DF0/7 ('06~) DF00//0 ('~) DF0A/300(A)/0S ('~) GASKET,0X7X GASKET,.X0X. 3-87J ANODE,PROTECTION E0-000 GASKET,PROTECTION COVER O RING,D:.9,ID: KEY,WATER PUMP 40-87J FILTER,FUEL J-000,WATER PUMP REPAIR 60-6A3-000 FILTER ASSY, OIL(WAKO) SPARK PLUG, BKR6E COTTER PIN,D:3.6,L: GASKET,0X7X GASKET,.X0X. 3-87J ANODE,PROTECTION E0-000 GASKET,PROTECTION COVER O RING,D:.9,ID: KEY,WATER PUMP 4-9J ELEMENT, FUEL FILTER J-000,WATER PUMP REPAIR 60-6A3-000 FILTER ASSY, OIL SPARK PLUG, BKR6E COTTER PIN,D:3.6,L: GASKET,0X7X GASKET,.X0X. 3-87J ANODE,PROTECTION E0-000 GASKET,PROTECTION COVER O RING,D:.9,ID: KEY,WATER PUMP 40-87J FILTER,FUEL 66-73G GASKET,OIL COOLER O RING(D:3.3,ID:6.74) O RING(D:3.,ID:9.6) O RING(D:3.,ID:69.4) J0-000,WATER PUMP REPAIR 60-96J FILTER ASSY,OIL SPARK PLUG, BKR6E COTTER PIN,D:3.6,L: GASKET,9.X6.X GASKET,.X0X. 3-87J ANODE,PROTECTION O RING,D:.9,ID: J0-000 SLEEVE,WATER PUMP CASE 40-96J FUEL,FILTER J0-000,WATER PUMP REPAIR 60-96J FILTER ASSY,OIL SPARK PLUG, BKR6E COTTER PIN,D:3.6,L: GASKET,9.X6.X GASKET,.X0X. 3-87J ANODE,PROTECTION O RING,D:.9,ID: ANODE SET,CLAMP BRACKET J0-000 SLEEVE,WATER PUMP CASE 4-93J0-000 ELEMENT, FUEL FILTER J0-000,WATER PUMP REPAIR 60-96J FILTER ASSY,OIL SPARK PLUG, BKR6E COTTER PIN,D:3.6,L: GASKET,9.X6.X GASKET,.X0X. 3-87J ANODE,PROTECTION O RING,D:.9,ID: J0-000 SLEEVE,WATER PUMP CASE ANODE SET,CLAMP BRACKET 4-93J0-000 ELEMENT, FUEL FILTER 40-87J FILTER,FUEL 4

29 ANODE *Stocks are limited, please contact your SUZUKI distributor for information. MERCHANDISE ZINC ANODE for saltwater ALUMINUM ANODE for brackish water, saltwater MESH CAP KNIT BEANIE High breathability cap will be good for summer season. Front: Cotton 00% Back: Polyester 00% X7-MY Knit cap with "SUZUKI MARINE" logo. Easy to carry in compact size. It is "Must-item" for the winter season. Acryl 00% X7-MY DF8A/9.9A/40A-60A, DTK-40W 3-87J0-000 DF.-300AP, DT9.9AK/AK CAP SUNGLASS DF60A-300AP Standard cap with "SUZUKI MARINE" logo. Simple design can be used for all situation. Cotton 00% X7-MY Polarizing glasses is used to protect your eyes. Including a case and tool to adjust frame. Frame: Aluminum Glass: plastic *Not CE approved X7-MY DF40A-60A/0-300AP CAP & NECK CAPE LIGHT GLOVES 3-9J DF.,DF4A-6A 3-93J0-000 DF0-300A Functional cap with neck cape protects you from sunshine front and back side. Also can be used as normal cap, when you take off the neck cape. Nylon: 00% X7-MY Functional and useful glove for working on the boat. Mesh material for quick drying is used to the back of the hand. Anti-slip Suede material and adjustable buckle is used to the palm part. Back: Polyester 00% Palm: Polyurethane 00% M: X7-MLM L: X7-MLL XL: X7-MLX DF/R/Q MAGNESIUM ANODE for freshwater SUN VISOR BEAR DOLL Sun visor with "SUZUKI MARINE" logo. Protect your face from strong sunshine. Cotton 00% X7-MY3 A cute bear doll wearing "SUZUKI MARINE" T-shirts made from soft material. It gives you a brief moment of healing. We express kindness and sincerity for the customer with this item. Polyester 00% X7-MY8 3-87J-000 DF4A-300AP,DT9.9A/A FACE GUARD 3-90J0-000 DF0AV/60AV/00A-40A DF70A-300AP Protect your face from heavy rain and wind on the boat. Soft material on the part of the mouth and wind-protection -fleece material on the whole neck part are used. It gives you comfort and moisture-retaining property. Outer layer: Polyester 00% Middle layer: Polyurethane 00% Inner layer: Polyester 00% X7-MY6 6 7

30 Recommended STEERING SYSTEM supplied by Order taking, delivery, technical support and warranty for these products are handled by SeaStar Solutions. Please consult to local SeaStar Solutions distributor or dealer if you need more detail for product information, price, availability and all business terms. STEERING TM OPTIMUS EPS A Higher Level Of Engineering Sophistication The Optimus EPS system replaces the traditional hydraulic steering system. For single, twin, triple and quad engine applications. Advantages of Optimus EPS No oil at helm Boat that steers like a sports car Plug and play autopilot compatibility No auto pilot pump or rudder feedback unit Auto adjusting speed sensitive wheel effort Auto a djusting speed sensitive turns lock to lock Can be retrofitted to existing mechanical and electronic controlled engines. You do not have to buy new engines No tie-bars (twin configuration) No liquid tie-bar (CAT) On demand pumps which extend battery life Components based on existing SeaStar reliability and quality NMEA 000 Certified OPTIMUS 360 BAYSTAR BAYSTAR OUTBOARD SYSTEM - HK400A-3 System comprises: BayStar Helm.4cu (.94cc) HH434-3 BayStar Compact Cylinder HC464H* 0ft cut to length tubing kit HT440H x litre SeaStar hydraulic oil HA430 *Note: -40hp four stroke 00 to current model require HC468H. BAYSTAR PLUS BAYSTAR OUTBOARD SYSTEM - HK400A-3 System comprises: BayStar Plus Helm.4cu (.94cc) HH44-3 BayStar Compact Cylinder HC464H* x litre SeaStar hydraulic oil HA430 Note: x SeaStar hose kits must be ordered separately *Note: -40hp four stroke 00 to current model require HC468H. SEASTAR SEASTAR OUTBOARD SYSTEM - HK System comprises: SeaStar Helm.7cu (7.80cc) HH7-3 SeaStar Pivot Cylinder HC34-3* x litre SeaStar hydraulic oil HA430 Note: x SeaStar hose kits must be ordered separately *Note: -40hp 996 only requires HC348, 40-40hp four stroke 998 to current model and 90hp four stroke 003 to current model require HC38. The patented Optimus 360 system builds on the Optimus EPS. Optimus 360 steering/ shift/throttle control system is engineered for powerboats with electronic shift and throttle engines, allowing you to use the existing electronic controls. Optimus 360 connects to the existing control head with closed loop processing, providing a very seamless integration. Advantages of Optimus 360 Intuitive high precision Joystick docking with confidence Seamless integration with electronic controlled engines Autopilot ready - just a simple connection Dual station compatible Tiebar engines (triple) less components, simple installation, less cost Available as a retrofit or for new engine installation All the benefits of Optimus EPS, including auto adjusting steering effort and steering turns lock to lock Supports Twin and Triple Suzuki Precision Control Engines Engine Manufacturer electronic shift & throttle compatible 3rd party Autopilot compatible TOURNAMENT CYLINDER AND ADJUSTABLE TIE BAR CONFIGURATION CYLINDER HARDWARE TIE BAR PART NO. QTY. PART NO QTY. PART NO. QTY. CENTER TO CENTER TO CENTER DISTANCE (IN) CENTER DISTANCE (MM) HO Twin Engine - Single Cylinder HC684 HA680 HO (STBD) HO HO Twin Engine - HO HC684 HA6804 Dual Cylinder HO HO SEASTAR POWER ASSIST SEASTAR OUTBOARD POWER ASSIST SYSTEM System comprises: SeaStar Helm.7cu (7.80cc) HH7-3 SeaStar Pivot Cylinder HC34-3* x litre SeaStar hydraulic oil HA430 SeaStar v Power Assist Unit PA00- Note: x SeaStar hose kits must be ordered separately *Note: -40hp 996 only requires HC348, 40-40hp four stroke 998 to current model and 90hp four stroke 003 to current model require HC38. Pump Control Module (PCM) Optimus EPS Helm Color CANtrak *For further application information please refer to BAYSTAR BAYSTAR PLUS OPTIMUM MAXIMUM OPTIMUM MAXIMUM 7 HP HP 0 HP 00 HP 0 HP 300 HP 300 HP+ As specialists in the art of steering, SeaStar Solutions take the recommendation of steering systems very seriously especially as modern outboard engines become more powerful. Unlike other steering manufacturers we prefer to make systems recommendations based on optimum comfort Optimus 360 Gateway when required Joystick SEASTAR OUTBOARD SYSTEM OPTIMUM MAXIMUM SEASTAR TOURNAMENT SEASTAR POWER ASSIST OUTBOARD SYSTEM OPTIMUM MAXIMUM OPTIMUM MAXIMUM SmartCylinders Optimus EPS + Joystick = Optimus 360 Joystick Control 8 9

31 APPLICATION CHART D F A P D F 0 A P D F 0 0 A P D F 7 A P D F 0 A P D F 0 D F D F 0 0 D F 0 0 A D F 7 D F 0 D F 4 0 A D F A D F 0 0 A D F 9 0 A D F 8 0 A D F 7 0 A D F 6 0 A D F 6 0 A V D F 0 A D F 0 A V D F 4 0 A D F 4 0 A S D F 3 0 A D F A D F 0 A D F A D F 9. 9 B D F 9. 9 A D F 8 A D T 4 0 D T 3 0 ITEM PAGE D F A P D F 0 A P D F 0 0 A P D F 7 A P D F 0 A P D F 0 S T D F 0 T D F 0 Z D F T D F Z D F 0 0 T D F 0 0 Z D F 0 0 A T D F 0 0 A Z D F 7 T D F 7 Z D F 0 A S D F 0 T D F 0 Z D F 4 0 A T D F 4 0 A Z D F A S D F A T D F A Z D F 0 0 A T D F 9 0 A T D F 8 0 A T D F 7 0 A T D F 6 0 A T D F 6 0 A V D F 0 A T D F 0 A V D F 4 0 A T D F 4 0 A S T D F 3 0 A T D F A R D F A T D F 0 A R D F 0 A T D F A R D F 9. 9 B R D F 9. 9 B T D F 9. 9 A R D F 8 A R D T 4 0 W R D T 3 0 R SUZUKI MULTI-FUNCTION GAUGE P.06 SUZUKI KEYLESS START SYSTEM P.0 ANALOG INSTRUMENT P.4- ELECTRONIC THROTTLE AND SHIFT SYSTEM P.6-33 ELECTRONIC REMOTE P.6-30 ELECTRONIC REMOTE CONTROL BOX P.7-30 BATTERY LEAD P.3 MECHANICAL REMOTE CONTROL SYSTEM P MECHANICAL REMOTE P MECHANICAL REMOTE CONTROL BOX P.40 BATTERY LEAD P.40 REMOTE-CONTROL CABLE P.4 REMOTE-CONTROL ATTACHING P.4 STEERING P.4-43 TILLER HANDLE P.4 DUAL-ENGINE TIE-BAR P.43 STEERING EXTENSION P.43 STEERING-BRACKET ATTACHIMENT P.43 DLUG-LINK P.43 ELECTRICAL PARTS P.44-4 COUNTER SELECT CONNECTOR P.3 BATTERY ISOLATOR LEAD SET P.4 ELECTRIC STARTER (ONLY FOR MZ type) P.4 BATTERY CHARGING (ONLY FOR MZ type) P.44 RECTIFIER SET (ONLY FOR MZ type) P.44 RECEPTACLE (ONLY FOR MZ type) P.44 ANODE P.6 FUEL SYSTEM P D F 9 0 A D F 7 0 A D F 6 0 A D F 6 0 A V D F 0 A D F 0 A V D F 4 0 A D F 3 0 A DF A DF 0 A D F A D F 9. 9 B D F 9. 9 A D F 8 A D F 6 A D F A D F 4 A D F. D T 4 0 D T 3 0 D T D T A D F. D T 4 0 W D T 4 0 W K D T 3 0 D T K D T A D T A K D T 9. 9 A D T 9. 9 A K D T 9. 9 A ITEM PAGE D F 9 0 A T H D F 7 0 A T H D F 6 0 A T H D F 6 0 A Q H D F 6 0 A V T H D F 0 A T H D F 0 A Q H D F 0 A V T H D F 4 0 A T H D F 4 0 A Q H D F 3 0 A D F 3 0 A T H D F 3 0 A Q H D F A D F A T H D F A Q H DF 0 A D F 0 A T H D F A D F A T H D F 9. 9 B D F 9. 9 B T H D F 9. 9 A DF 8 A DF 6 A DF A DF 4 A SUZUKI MULTI-FUNCTION GAUGE P.06 SUZUKI KEYLESS START SYSTEM P.0 ANALOG INSTRUMENT P.4- ELECTRONIC THROTTLE AND SHIFT SYSTEM P.6-33 ELECTRONIC REMOTE P.6-30 ELECTRONIC REMOTE CONTROL BOX P.7-30 BATTERY LEAD P.3 MECHANICAL REMOTE CONTROL SYSTEM P MECHANICAL REMOTE P MECHANICAL REMOTE CONTROL BOX P.40 BATTERY LEAD P.40 REMOTE-CONTROL CABLE P.4 REMOTE-CONTROL ATTACHING P.4 STEERING P.4-43 TILLER HANDLE P.4 DUAL-ENGINE TIE-BAR P.43 STEERING EXTENSION P.43 STEERING-BRACKET ATTACHIMENT P.43 DLUG-LINK P.43 ELECTRICAL PARTS P.44-4 COUNTER SELECT CONNECTOR P.3 BATTERY ISOLATOR LEAD SET P.4 ELECTRIC STARTER (ONLY FOR MZ type) P.4 BATTERY CHARGING (ONLY FOR MZ type) P.44 RECTIFIER SET (ONLY FOR MZ type) P.44 RECEPTACLE (ONLY FOR MZ type) P.44 ANODE P.6 FUEL SYSTEM P