Efficacy (LM/W)* Rated Initial Lumens (LM)

Size: px

Start display at page:

Download "Efficacy (LM/W)* Rated Initial Lumens (LM)"

Philippa Bridges
6 years ago
Views:

1 TUBULAR SYSTEM TUBULAR LAMP SYSTEM SPECIFICATIONS System Model Number Watts Input current (Amp) 120V - 277V Input Power (W) Rated Initial Lumens (LM) Efficacy (LM/W)* HH-ILS-TP40-5K HH-ILS-TP55-5K HH-ILS-TP70-5K HH-ILS-TP80-5K HH-ILS-TDC80-5K HH-ILS-TP100-5K HH-ILS-TDC100-5K HH-ILS-TP120-5K HH-ILS-TDC120-5K HH-ILS-TP150-5K HH-ILS-TDC150-5K HH-ILS-TP200-5K HH-ILS-TDC200-5K HH-ILS-TP HH-ILS-TDC HH-ILS-TP250-5K HH-ILS-TDC250-5K HH-ILS-TDC300-5K HH-ILS-TDC400-5K H-I-TDC Lumen Maintenance (60Khrs) * NOTE: Bare Lamp specifications will vary from fixture test results; LM/W is based on tested Lamp Power. Reference "RELATIVE LUMEN OUTPUT CHART" and contact Fulham for proper Spectrophotocolormeter "Sphere" test procedures. CRI 70%-75% > 80 Color Temp. (Kelvin) 2700K K (5K Standard Color) Average Lamp Life (Hours) 100,000 SYSTEM ELECTRICAL SPECIFICATION COMMON TO ALL GENERATORS Input Voltage V EMI/RFI Compliance FCC Part 18-A Voltage Fluctuation Tolerance ±10% Sound Rating Class A Input Frequency 50/60 Hz Type 1 Outdoor Output Frequency <250K Hz Surge Protection** Yes (Reference hi-pot test footnote) THD < 10% Max. Remote Distance*** 7 ft. (84 ) (Reference Wiring Footnote) Power Factor > 0.95 Wiring Plug-n-Play Connectors Constant Wattage Output <5% Wire Rating 150 C 600V (Lamp Wire Shielded) Case Temp. < 65 C Electrostatic Discharge (ESD) IEC :Class 4 Operating Temp. Open Fixture 0 C to 50 C Electrical Fast Transient/Burst(EFT) IEC : Level 4 Operating Temp. Closed Fixture -20 C to 50 C Surge Immunity IEC : Class 4 CERTIFICATIONS E **Surge Protection: Contact Fulham before conducting Hi-Pot test. ***Wiring: Do not modify wire type or length without contacting Fulham for assistance. Reference Remote Mount Options Chart for Special Factory Order Systems and Wire Extensions under Lamp Advanced Features. SYSTEM MODEL NUMBER EXAMPLE HH ILS T DC 200 5K HH = HIGHHORSE ILS = INDUCTION LIGHTING SYSTEM T = TUBULAR LAMP DC = DIE CAST P = PROFILE BALLAST SYSTEM WATTS KELVIN TEMP. Specify Kelvin when ordering. 5K is standard stock color. V REMOTE MOUNT Reference Remote Mount Options Chart for Code Rev T

2 TUBULAR SPECIFICATIONS TUBULAR LAMP SYSTEM SPECIFICATIONS Lamp Type Circular/Tubular Hybrid Fluorescent Primary Ignition Operating Temperature Range (Thermal Management) External Inductor Type All Low Frequency Inductor Coil Induction Lamp Core Mounting Base 100 C C Amalgam Lamp Tip Temperature Range 55 C C Lamp Coil 160 C C Circular/Tubular Lamp Operation Color Temperature Fluctuation <10% LPW Fluctuation <10% Lamp Kelvin Temperature Options Kelvin Temperature (Standard) Limited Stock (call Fulham for availability) Special Factory Order (call Fulham) Convection or Conduction 5000K Kelvin Color Temperature Tolerance ±300K Cold Start and Operation Systems Operating Temperature (Closed Fixture) EMI 3500K, 4000K 2700K, 3000K, 6000K, 6500K -40 C Freezer Operation Only (Call Fulham for Assistance) Meets International Standard L Level FCC Non-Consumer units Compliant FCC 47-CFR Part 18 Vibration Tests The HighHorse Induction lamp is designed to tolerate shock and vibration that would be expected in typical applications such as post top, bridge, roadway underpass or tunnel lighting. HighHorse Induction lamps have been tested under the following conditions with no damage: -Shock - Lamps subjected to three (3) one-half wave shocks of 10 ms duration at 20 g. -Vibration parameters adapted from ANSI C , American National Standard for Roadway Lighting Equipment - Luminaire Vibration, Section 5, luminaire vibration test. Start Freq. Amplitude End Freq. Amplitude 5Hz 1.5 G Hz 3.5 G 10Hz 3.5 G 30Hz 3.5G Sweep between 5 Hz and 30 Hz at Min/sweep (Linear) Duration: 100,000 cycles at 100% Total test time: 1:36:30 Care should be taken when mounting ballast to minimize vibration UV * LPW is related to the temperature of Amalgam and Kelvin Temperature to maintain >90% output. UV (bare lamp-less with lens) 5uw/cm Rev T

3 TUBULAR SPECIFICATIONS TUBULAR LAMP SYSTEM SPECIFICATIONS (Part II) Amalgam Hg. Am algam Type The Office of Energy Efficiency and Renewable Energy ( EERE ) at the US Department of Energy ( DOE ) has recently issued guidance relating to the Buy American Provisions of the Recovery Act. EERE issued the attached (i) Guidance on Manufactured Goods and Substantial Transformation for Financial Assistance Awards on May 24, 2010 ( Guidance ) and (ii) Memorandum of Decision granting a waiver of Section 1605 for Induction Lamps and Generators on August 11, 2010 ( Waiver ). The Guidance and Waiver are applicable to projects receiving financial assistance under the Recovery Act and are in effect until further notice from the DOE. Applying the terms of the Waiver, Fulham s induction lamps and generators are categorically exempt from the Buy American Provisions. Please use the matrix below in determining the applicability of the Buy American Provisions to the constituent parts provided by Fulham for New or Retrofit Induction Fixtures. Fulham Induction Lamps Exempt Under Waiver Fulham Induction Generators Exempt Under Waiver Fulham Retrofit Kit (Reflector and Mounting Kit only) Made in America Amalgam Chart Tubular (Am algam Tube-Down Orientation) See page 4 High Quality Solid Pellet Lamp Type T40W T55W T70W T80W T100W T120W T150W T200W T250W T300W T400W Amalgam Type B B B B B B B C C C C Weight/ PC (mg) PCS Total Weight (mg) Content of Hg in % Pure Hg Weight (mg) Lamp Orientation Lamp Advanced Features Ultra-High Life 100,000hr Rated Lam p Technology Wide Range of Wattage Options 40W 400W Full Kelvin Color Range K Ins tant Start Flicker Free Operation Frequency Power Tuned Wattage to Ballas t High Quality Phos phor Blends High CRI (Color Rendering Index) High Quality Solid Am algam Pellet Ultra-Low Mercury Content (Encaps ulated) Pre-Wired Lam p Input Connector Univers al Heat Sink Mounting Alum inum Coil Shield (Non-Corros ive) Com patible with Fulham Dim m ing Generators Com patible with Motion and Light Sens or Line Controls MADE IN AMERICA The above determination does not apply to imported New or Retrofit Induction Fixtures (including the constituent housing, reflector, mounting kit and lens) supplied by customers or third parties. Each such item must be evaluated under the Recovery Act, Guidance and Waiver on a case by case basis by the customer or third party for compliance with the Buy American Provisions Rev T

4 LAMP ORIENTATION Amalgam Tube on the down side orientation for all possible lamp orientations Rev T

5 INRUSH / INDUCTANCE TUBULAR SYSTEM INRUSH CURRENT System Model Number Watts Voltage Inrush Current Inrush Period HH-ILS-TP40-5K V 9.0A ĎĆĆBĆ Œ I I L[ { Çt يي Yي V 14.0A ĐĆĆBĆ Œ I I L[ { Çt ھ ی Yي V 14.0A ĐĆĆBĆ Œ I I L[ { Çt ھ ی Yي HH-ILS-TDC80-5K HH-ILS-TP100-5K HH-ILS-TDC100-5K HH-ILS-TP120-5K HH-ILS-TDC120-5K HH-ILS-TP150-5K HH-ILS-TDC150-5K HH-ILS-TP200-5K V 14.0A ĐĆĆBĆ Œ V 14.0A ĐĆĆBĆ Œ V 14.0A ĐĆĆBĆ Œ V 14.0A ÐDĆBĆ Œ System Model Number Watts Voltage Inrush Current Inrush Period HH-ILS-TP40-5K V 18.0A DĆĆBĆ Œ I I L[ { Çt يي Yي GG 277V 18.0A DĆĆBĆ Œ I I L[ { Çt ھ ی Yي V 27.0A ĎĆĆBĆ Œ I I L[ { Çt ھ ی Yي HH-ILS-TDC80-5K HH-ILS-TP100-5K HH-ILS-TDC100-5K HH-ILS-TP120-5K HH-ILS-TDC120-5K HH-ILS-TP150-5K HH-ILS-TDC150-5K HH-ILS-TP200-5K V 27.0A ĎĆĆBĆ Œ V 27.0A ĎĆĆBĆ Œ V 27.0A ĎĆĆBĆ Œ V 32.0A ĐĆĆBĆ Œ As with all electronic equipment, Fulham Induction Systems have a peak current shortly after the mains is switched on; while this is a momentary condition it is important to calculate the total load during this peak current demand. It is advised to use C-type MCBs in lighting installations with electronic ballasts. If it is absolutely necessary to connect more than the specified maximum number of fixtures based on peak demand contact a Licensed Electrician and consider a relay in the wiring circuit to limit the number of activated fixtures at one time. HH-ILS-TDC200-5K HH-ILS-TP V 16.0A EĆĆBĆ Œ HH-ILS-TDC200-5K HH-ILS-TP V 34.0A ÐĆĆBĆ Œ HH-ILS-TDC HH-ILS-TDC HH-ILS-TP250-5K V 18.0A EĆĆBĆ Œ HH-ILS-TDC250-5K HH-ILS-TDC300-5K V 22.0A EĆĆBĆ Œ I I L[ { Ç5/ ھ ھى Yي H-I-TDC V 25.0A EDĆBĆ Œ NOTE: ALWAYS CONSULT A LICENSED ELECTRICIAN BEFORE INSTALLING ANY ELECTRICAL DEVICE. HH-ILS-TP250-5K HH-ILS-TDC250-5K HH-ILS-TDC300-5K V 277V 35.0A 36.0A ÐĆĆBĆ Œ ÐĊĆBĆ Œ I I L[ { Ç5/ ھ ھى Yي H-I-TDC V 39.0A ÐĊĆBĆ Œ TUBULAR LAMP INDUCTANCE Coupler Value 40W 55W 70W 80W 100W 120W 150W 200W 250W 300W 400W L (Inductance) 600.0µH 600.0µH 760.0µH 680.0µH 600.0µH 760.0µH 530.0µH 650.0µH 700.0µH 650.0µH 650.0µH Windings (Turns) Frequency Connected Method Room Ambient All types of Inductance (Self/Mutual/Partial/Loop/Loop Mutual) are directly related to the number of magnetic fields around a conducter per amp of current; it requires special equipment to measure inductance. Fulham Retro-fit Engineering Services is equipped to measure and mitigate the effects of Inductance which ultimately can produce failure of the system when not considered in the design of an Induction fixture. All Fulham engineered systems are certified to operate properly relative to Inductance, Thermal, and overall fixture efficacy Rev T 250khz Ls 25 C

6 REMOTE MOUNT TUBULAR SYSTEM REMOTE MOUNT OPTION Standard Length (in-stock) Factory Special Order Only; subject to minumum quantity and lead times at time of order. Contact Fulham for requirements prior to order. Orders are non-cancellable. Output Wire length: 10 ft. 20 ft. 30 ft. 40 ft. 50 ft. HH-ILS-TP40-5K HH-ILS-TP40-5KV HH-ILS-TP40-5KW HH-ILS-TP40-5KX HH-ILS-TP40-5KY HH-ILS-TP40-5KZ HH-ILS-TP55-5K HH-ILS-TP55-5KV HH-ILS-TP55-5KW HH-ILS-TP55-5KX HH-ILS-TP55-5KY HH-ILS-TP55-5KZ HH-ILS-TP70-5K HH-ILS-TP70-5KV HH-ILS-TP70-5KW HH-ILS-TP70-5KX HH-ILS-TP70-5KY HH-ILS-TP70-5KZ HH-ILS-TP80-5K HH-ILS-TP80-5KV HH-ILS-TP80-5KW HH-ILS-TP80-5KX HH-ILS-TP80-5KY HH-ILS-TP80-5KZ HH-ILS-TDC80-5K HH-ILS-TDC80-5KV HH-ILS-TDC80-5KW HH-ILS-TDC80-5KX HH-ILS-TDC80-5KY HH-ILS-TDC80-5KZ HH-ILS-TP100-5K HH-ILS-TP100-5KV HH-ILS-TP100-5KW HH-ILS-TP100-5KX HH-ILS-TP100-5KY HH-ILS-TP100-5KZ HH-ILS-TDC100-5K HH-ILS-TDC100-5KV HH-ILS-TDC100-5KW HH-ILS-TDC100-5KX HH-ILS-TDC100-5KY HH-ILS-TDC100-5KZ HH-ILS-TP120-5K HH-ILS-TP120-5KV HH-ILS-TP120-5KW HH-ILS-TP120-5KX HH-ILS-TP120-5KY HH-ILS-TP120-5KZ HH-ILS-TDC120-5K HH-ILS-TDC120-5KV HH-ILS-TDC120-5KW HH-ILS-TDC120-5KX HH-ILS-TDC120-5KY HH-ILS-TDC120-5KZ HH-ILS-TP150-5K HH-ILS-TP150-5KV HH-ILS-TP150-5KW HH-ILS-TP150-5KX HH-ILS-TP150-5KY HH-ILS-TP150-5KZ HH-ILS-TDC150-5K HH-ILS-TDC150-5KV HH-ILS-TDC150-5KW HH-ILS-TDC150-5KX HH-ILS-TDC150-5KY HH-ILS-TDC150-5KZ HH-ILS-TP200-5K HH-ILS-TP200-5KV HH-ILS-TP200-5KW HH-ILS-TP200-5KX HH-ILS-TP200-5KY HH-ILS-TP200-5KZ HH-ILS-TDC200-5K HH-ILS-TDC200-5KV HH-ILS-TDC200-5KW HH-ILS-TDC200-5KX HH-ILS-TDC200-5KY HH-ILS-TDC200-5KZ HH-ILS-TP HH-ILS-TP V HH-ILS-TP W HH-ILS-TP X HH-ILS-TP Y HH-ILS-TP Z HH-ILS-TDC HH-ILS-TDC V HH-ILS-TDC W HH-ILS-TDC X HH-ILS-TDC Y HH-ILS-TDC Z HH-ILS-TP250-5K HH-ILS-TP250-5KV HH-ILS-TP250-5KW HH-ILS-TP250-5KX HH-ILS-TP250-5KY HH-ILS-TP250-5KZ HH-ILS-TDC250-5K HH-ILS-TDC250-5KV HH-ILS-TDC250-5KW HH-ILS-TDC250-5KX HH-ILS-TDC250-5KY HH-ILS-TDC250-5KZ HH-ILS-TDC300-5K HH-ILS-TDC300-5KV HH-ILS-TDC300-5KW HH-ILS-TDC300-5KX HH-ILS-TDC300-5KY HH-ILS-TDC300-5KZ HH-ILS-TDC400-5K HH-ILS-TDC400-5KV HH-ILS-TDC400-5KW HH-ILS-TDC400-5KX HH-ILS-TDC400-5KY HH-ILS-TDC400-5KZ H-I-TDC H-I-TDC V H-I-TDC W H-I-TDC X H-I-TDC Y H-I-TDC Z Lamp Advanced Features POWER SOURCE: 120V - 277V EXTENSION WIRE P/N LENGTH INCHES FEET HHILPE " 0.3' HHILPE " 1.0' HHILPE " 3.0' *HHILPE " 7.0' NOTE: Product is shipped as shown LENGTH ASSEMBLY VIEW WIRE SHIELD FEMALE CONNECTOR TO BALLAST WIRE SPECIFICATIONS: V 18AWG MALE CONNECTOR TO LAMP NOTE: Standard Extension Wires HHILPE00007 available for Circular and Tubular Lamp systems only. Contact Fulham for assistance in engieering your custom wires options Rev T

7 LUMEN MAINTENANCE (-30ºC) Lumen Output (Fc) Input Power (W) Lamp Amalgam Temp. ( C) (52ºC) MINUTES NOTE: Purpose of Lumen Maintenance Chart is strictly to show relation of the three variables over time. % RATED LUMENS SURVIVAL % ,000 40,000 60,000 80, ,000 OPERATING HOURS ,000 40,000 60,000 80, ,000 OPERATING HOURS Rated Lumen Maintenance Chart Cold Start Lumen Maintenance Chart HighHorse induction systems operate within a wide range of ambient; the chart is an example of a 100W induction system operated at extreme cold temperature. It is recommended if the system requires a cold start at -30 C that a thermal blanket be installed at the factory on the amalgam tip; this will ensure a consistent start and rapid stabilization of the lamp and lumen output. Note: Closed fixture example, actual performance varies with fixture types. Rated Lumen Maintenance is largely determined by operating temperature of the lamp and quality of lamp design; Fulham HighHorse induction systems are designed and manufactured with high quality tri-phosphors and solid amalgam to optimize the performance and rated life of the lamp. The above chart is intended to represent an average rated lumen output stated as a percentage of the initial lumen output over the rated life of the lamp. Operating the lamp within the temperatures specifcation will typically result in not less than 70% lumen output at 60Khrs. System Rated Life Chart System Rated Life varies with operating temperature and application. Fulham HighHorse induction generators are designed with high quality long lasting components and when operated at the rated Tc 65ºC expected life is 60Khrs with failure rate of 15% to 20%. Operating temperatures less than the rated Tc 65ºC can typically improve life expectancy and reduce failure rate Relative Lumen Output W ballast Relative Lumen Output Chart Lumen output is directly related t System Power and Amalgam Temperature; properly designed systems result in a stable lamp condition and maximum light output. All Fulham Engineered HighHorse Induction systems operate with less than a 15% vatiation over a wide range of Amalgam operating temperature (60ºC - 125ºC). Fulham Retro-fit systems are engineered for a maximum light output and improved life expectancy Relative Light Output System Power Amalgam Temperature (C ) Rev T

TEMPERATURE TEST POINTS PLEASE NOTE: Induction lamps are fragile and require care when handling; DO NOT allow the glass to come in contact with metal objects. The amalgam glass can be easily broken.

TEST POINT TEMPERATURE TEST POINTS: RATED TEMPERATURE MAX TEMPERATURE 1 BALLAST: TC < 65ºC (149ºF) 65ºC (149ºF) 2 BALLAST: SIDE 1 < 65ºC (149ºF) 65ºC (149ºF) 3 BALLAST: SIDE 2 < 65ºC (149ºF) 65ºC

AMALGAM TIP 55ºC (131ºF) - 125ºC (257ºF) 125ºC (257ºF) 9 LAMP AMBIENT < 80ºC (176ºF) < 100ºC (212ºF) 10 COIL WIRE RATING < 140ºC (284ºF) 150ºC (302ºF) 11 N/A N/A N/A 12 LAMP TUBE ON INSIDE CENTER <

8 TEMPERATURE TEST POINTS PLEASE NOTE: Induction lamps are fragile and require care when handling; DO NOT allow the glass to come in contact with metal objects. The amalgam glass can be easily broken TUBULAR LAMP DIE CAST BALLAST PROFILE BALLAST TUBULAR INDUCTION SYSTEM TEMPERATURE CHART Note: Test points 2 and 3 are on the side of the ballast; location is not precise. TEST POINT TEMPERATURE TEST POINTS: RATED TEMPERATURE MAX TEMPERATURE 1 BALLAST: TC < 65ºC (149ºF) 65ºC (149ºF) 2 BALLAST: SIDE 1 < 65ºC (149ºF) 65ºC (149ºF) 3 BALLAST: SIDE 2 < 65ºC (149ºF) 65ºC (149ºF) 4 BALLAST PLATE/MOUNTING LOCATION N/A N/A 5 BALLAST AMBIENT N/A N/A 6 LAMP BASE (HEAT SINK) 100ºC (212ºF) C (266 F) 130ºC (266ºF) 7 LAMP COIL < 160ºC (320ºF) 200ºC (392ºF) 8 LAMP AMALGAM TIP 55ºC (131ºF) - 125ºC (257ºF) 125ºC (257ºF) 9 LAMP AMBIENT < 80ºC (176ºF) < 100ºC (212ºF) 10 COIL WIRE RATING < 140ºC (284ºF) 150ºC (302ºF) 11 N/A N/A N/A 12 LAMP TUBE ON INSIDE CENTER < 140ºC (284ºF) 180ºC (356ºF) 13 WIRE CONNECTOR < 105ºC (221ºF) 105ºC (221ºF) NOTE: TEMPERATURE MEASUREMENTS ARE RECOMMENDED TO BE AT THE RATED TEMPERATURE FOR BEST PERFORMANCE AND LIFE EXPECTANCY. LAMP AND GENERATOR TEMPERATURES MAY NOT EXCEED THE MAXIMUM OPERATING AMBIENT TEMPERATURE WHEN INSTALLED IN A FIXTURE. CONTACT FULHAM FOR APPROVED TEMPERATURE TEST PROCEDURE Rev T

9 DIMENSIONS - TUBULAR H.03" H ±.10 W.15" W ±.10 L.10" L ±.10 40W - 55W 70W - 400W Model No. HH-IL-T40W5K تو HH-IL-T55W5K HH-IL-T70W5K HH-IL-T80W5K HH-IL-T100W5K HH-IL-T120W5K HH-IL-T150W5K HH-IL-T200W5K-17 HH-IL-T200W5K HH-IL-T250W5K HH-IL-T300W5K HH-IL-T400W5K H-IL-T400W5K-35 L (in) 7.96 EBĎĈ EBĎĈ ĈĈBDĐ ĈĊBĈĐ ĈDBČČ ĈĐBĆĐ ČĈBDĆ ČĊBĆĆ ČĎBĐE ÇČBĈĊ ĊÇBÐĆ Contact Fulham for detailed drawings. * Subject to change. Contact Fulham for specific wire lengths. Tubular Lamp W (in) 4.42 ĐBČÐ ĐBČÐ ĐBÇE ĎBČĐ ĐBÇĆ H (in) Input Wire L (in) Rev T

10 DIMENSIONS - BALLASTS W±.03 W±.03 L±.03 L±.03 H±.03 H±.03 RUBBER GASKET Die Cast Ballast (White) Profile Aluminum Ballast (Black) Die Cast ballast Model No. Size L HH-IB-UNV-TCDC80 SMALL HH-IB-UNV-TCDC100 SMALL HH-IB-UNV-TCDC120 SMALL HH-IB-UNV-TCDC150 SMALL HH-IB-UNV-TCDC200 STANDARD HH-IB-UNV-TCDC250 HH-IB-UNV-TCDC300 HH-IB-UNV-TDC400 STANDARD STANDARD STANDARD W H Input Wire L (in) Output Wire L (in)* Profile Ballast Model No. Size L W H Input Wire L (in) Output Wire L (in)* HH-IB-UNV-TP40 SMALL "40" ± 1" 10± 1" HH-IB-UNV-TP55 SMALL "40" ± 1" 10± 1" HH-IB-UNV-TCP70 MEDIUM HH-IB-UNV-TCP80 MEDIUM ± 1" 10± 1" HH-IB-UNV-TCP100 MEDIUM HH-IB-UNV-TCP150 STANDARD HH-IB-UNV-TCP250 LARGE Contact Fulham for detailed drawings. * Subject to change. Contact Fulham for specific wire lengths. 10± 1" 10± 1" 10± 1" 10± 1" HH-IB-UNV-TCP120 STANDARD ± 1" 10± 1" 10± 1" 10± 1" HH-IB-UNV-TCP200 STANDARD ± 1" 10± 1" 10± 1" 10± 1" Rev T

CRI INDUCTION LUMEN MAINTENANCE LONG-LASTING BENEFITS THE EVOLUTION OF LIGHTING

CRI INDUCTION LUMEN MAINTENANCE LONG-LASTING BENEFITS THE EVOLUTION OF LIGHTING Pemco Lighting Products is very pleased to be able to offer a wide variety of Induction lamp systems, as an option, in almost all fixtures we manufacture. The following information should help you determine