aleddra Dual-mode SureFit Tube G3 Dimmable LED Tube G5 SureFit U-bend LED Tube 8-ft Linear Strip Conversion Kit/G13 Socket

Transcription

1 Product Catalog 1 Dual-mode SureFit Tube G3 Dimmable LED Tube Safest LED T8 on the market Double-end wired with safety switches Ballast compatible AC Line Voltage friendly Patented safety design for anti-shock protection Available in and, all colors Universal driver (110V-277V) Works with shunted and non-shunted sockets DLC 4.2 qualified Ideal energy saving replacement for traditional T12 and T8 fluorescent lamps TRIAC base (forward phase) dimmer support. entrances, schools, museum and commercial building Double-ended tubes may be installed in either shunted or non-shunted lamp holders Patented safety design for anti-shock protection Driver style: field-replaceable internal driver Lighting is brighter Linear Strip Conversion Kit/G13 Socket G5 SureFit U-bend LED Tube Low maintenance cost Suitable for all G13 T8 bi-pin LED tube (double-end LED tube is strongly recommended for safety reasons) Pre-wired conversion kit bracket for easy installation Pre-drilled holes for 8-4I to 2-2I conversion and ballast cover installation Universal driver (110V-277V) UL Rated Made in Italy Non-shunted sockets Only available at Aleddra! UL OOLV certified for plug and play, and UL IFAR certified for direct wire Fits all standard 2'x2' U-bend troffers and sockets Works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V Double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets) Field-replaceable internal driver EasiFit T5 Ballast-Compatible LED Tube LED Cooler Tube Direct-fit, plug & play with T5HO ballast Full nano plastic housing body, giving it the exact look and feel of fluorescent T5 and a very wide lighting angle Fits nicely into the existing T5 fixture without any rewiring Lighting is brighter Qualifies for Utility Rebates IP65 rating for moisture proof LED alternative for refrigerator lighting National grocers, supermarkets, and convenience stores are the perfect target audience for the CoolerTube Omni A19 Screw-in LED Bulb Same look-and-feel of an incandescent bulb No dark zone on the base of the bulb Light shines bright and is below the base Driver-less technology Rated for enclosed fixtures Energy efficient Cost-effective Non-dimmable CF-LED Lamp PL Replacement 50% energy saving and 75% maintenance reduction Cost-effective Rated for enclosed fixture GX23-2 & G24Q bases are dual-mode: ballast-compatible and line voltage friendly E26 & GU24 bases are line voltage friendly Can be installed horizontally or vertically with the same beam spread as traditional lamps CF-LED U-Lamp HID/MH Replacement LED Tube / PLL LED Lamp AC friendly (ballast must be bypassed) Compact design and half the weight of LEC Corn Light Up to 80% energy savings! Cost-effective HID/MH replacement Mounting style: Base-up (BU), Horizontal or Base-Down (BD) 22W to 50W may be used with enclosed fixture with sufficient housing space 80W not recommended for enclosed fixture Ballast bypass (Type B) Double-end wired on line voltage Universal driver 110V-277V and frosted lens All popular 8 f-t bases available (FA8, R17D, G13) Ballast bypass (Type B) Target Replacement Lamps: FT/2G11 : 125 lm/w Energy efficient Cost-effective

2 Product Catalog 2 Disc Light EasiFit Troffer Kit Easy integration to new fixture construction Application: Ceiling Light, Flush Mount Fixtures Integral driver-on-board Line-voltage dimmable Title 24 compliant Easy installation, no screw needed Size: 2x2 and 2x4 0-10V Dimmable Certified for utility rebate DLC Premium listed 7-year warranty (10-year optional) UFO Highbay Fixture Linear Highbay Fixture Saves up to 70% energy as compared to existing highbay fixtures Stylish and modern design and a lower profile Designed for indoor lowbay or highbay application DLC 4.0 qualified for utlity rebate application Saves up to 70% energy as compared to existing highbay fixtures Meanwell driver Samsung LED Motion sensor: optional DLC 4.0 qualified for utility rebate application Slim Vapor Tight Sizes:,, IP65 rated Motion Sensor (optional) Emergency Backup (optional) 180 minutes on battery Battery check by remote control 5-year warranty Economy LED Vapor Tight Luminaire Up to 50% Energy Savings Longer operational life Lower maintenance costs IP65 rated Motion sensor optional 10-year warranty LED Flood Light Slim Shoebox Fixture Compact and light weight Wide range of wattage Higher wattage models can be used for sports field lighting Samsung LED doides 5-year warranty Energy-efficient and cost-effective replacement for existing parking lot lighting luminaire Slim exterior design yields less wind drag, protective cover on the back prevents bird from nesting Light Distribution: Type III & Type V Options: Wireless dimming controller, Photocell, 480V driver, square/round mounting brackets IP65 wet location Slim Lowbay Canopy Quick Mounting Wall Pack Energy-efficient & cost-effective replacement for existing traditional lowbay canopy luminaire Built with top of the line LEDs and the reputable Meanwell driver Canopy light uses aluminum die-casting heat sink and exterior Sleek and asthetic appearance IP65 wet location Ideal for gas station canopy lighting applications More than 85% light transmission glass lens Application: outdoor walkways, security lighting, building entrances, schools, museum and commercial building Back fins on base cover, providing efficient heat dissipation Photocell installed by default 0-10V dimmable for great energy savings Light guard for dark-sky compliance (optional) Vandal protection guard (optional) Photo control and motion sensor (optional)

3 G5 T8 LED Tube Ballast & AC Compatible & Size Lens Type Driver Style Ballast, CRI > 80 Input Voltage, Field-replaceable internal driver Instant Start lens 140 lm/w Lens 120 lm/w 2700K,,,, 6000K 110V-277V (50-60Hz) Operating Temp. -20ºF to 122ºF Power Consumption Light Output Beam Angle 10W, 1800lm 5-year warranty/50,000 hours Safest LED T8 on the market Double-end wired with safety switches Ballast compatible AC Line Voltage friendly Patented safety design for anti-shock protection Patented replaceable driver to extend LED tube life to 10 years Available in and, all colors Universal driver (110V-277V) The SureFit tube comes with a field replaceable driver Works with shunted and non-shunted sockets UL and cul Type A/Type B listed (OOLV/OOLV7.E479597) UL and cul classified (IFAR/IFAR7.E325073) DLC 4.2 qualified Maintenance personnel can now easily insert a G5 SureFit tube in a fixture just like they would do for an ordinary T8 fluorescent. When the ballast fails, electricians may bypass the ballast for further energy savings. When wired double ended on line voltage, patented saftey switches on both ends make the G5 tube the safest LED T8 on the market. DOUBLE-END WIRED W/ SAFETY SWITCHES Patented safety switches protect an installer from electric shock hazard, unlike some products on the market, the G5 works with existing T8/T12 sockets, shunted or non-shunted. Furthermore, adds an additional fail safe in case of accidental future fluorescent reinsertion by custodial staff. AC-LINE VOLTAGE FRIENDLY It works with direct input voltage from 110V to 277V THE SUREFIT TUBE It has a field replaceable driver. You may opt to purchase the field replaceable driver at time of product purchase, effectively extending the product's warranty from 5 years to 10 years. Standard warranty is 5 years/50,000 hours DARE-YOU-TO-TOUCH-IT TEST If the other manufacturer inserts one end of their tube into a live fixture and will not touch the pins of the exposed end, then it is not a safe product. Model # Size Lens Model # Size Lens LLT-2-T8-10W-DBA-D-27K LLT-2-T8-10W-DBA-D-30K LLT-2-T8-10W-DBA-D-35K LLT-2-T8-10W-DBA-D-40K LLT-2-T8-10W-DBA-D-50K LLT-2-T8-10W-DBA-D-60K LLT-2-T8-10W-DBA-C-27K LLT-2-T8-10W-DBA-C-30K LLT-2-T8-10W-DBA-C-35K LLT-2-T8-10W-DBA-C-40K LLT-2-T8-10W-DBA-C-50K LLT-2-T8-10W-DBA-C-60K 10W 10W 10W 10W 10W 10W 10W 10W 10W 10W 10W 10W 1100lm 1100lm 1100lm 1200lm 1200lm 1200lm 1300lm 1300lm 1300lm 1400lm 1400lm 1400lm 2700K 6000K 2700K 6000K LLT-4-T8--DBA-D-27K LLT-4-T8--DBA-D-30K LLT-4-T8--DBA-D-35K LLT-4-T8--DBA-D-40K LLT-4-T8--DBA-D-50K LLT-4-T8--DBA-D-60K LLT-4-T8--DBA-C-27K LLT-4-T8--DBA-C-30K LLT-4-T8--DBA-C-35K LLT-4-T8--DBA-C-40K LLT-4-T8--DBA-C-50K LLT-4-T8--DBA-C-60K 1650lm 1650lm 1650lm 1800lm 1800lm 1800lm 1950lm 1950lm 1950lm 2100lm 2100lm 2100lm 2700K 6000K 2700K 6000K

4 T8 LED Linear Tube G3 Dimmable Double-end Ideal energy saving replacement for traditional T12 and T8 fluorescent lamps TRIAC base (forward phase) dimmer support. entrances, schools, museum and commercial building Double-ended tubes may be installed in either shunted or non-shunted lamp holders Patented safety design for anti-shock protection Driver style: field-replaceable internal driver Length 100 LPW (diffused lens) 30K, 41K, 50K, 60K CRI > 80 Input Voltage 110V-277V (50-60Hz) Operating Temp. -20ºF-122ºF Power at 18W Output at 1800lm Beam Angle 120º Dimmable via TRIAC based dimmer UL 1598C Classified: #E Aleddra s third-generation double-ended EasiRetrofit LED tube lamp is now dimmable via TRIAC based dimmer. It has been UL-classified according to the latest 1598C safety standards. It is an ideal energy saving replacement for traditional T12 and T8 fluorescent lamps. The double-ended tubes can be installed in either shunted or non-shunted lamp holders, saving 50-70% installation time and associated labor costs compared to retrofits using standard single-ended LED tubes. The third-generation EasiRetrofit LED tube features a patented field-replaceable driver. It can be installed into the existing tube in less than 2 minutes. It minimizes the repair and replacement downtime in the field and also doubles the lifetime of the LED tube to 10 years at a fraction of the cost of a new tube replacement. Rated Life up to 50,000 hours 5-year warranty (12 hours/day usage) Wiring Diagram Black square indicates ballast. Always ensure that the working voltage is 100v to 277v. This product is directly connected to the power supply. No ballast or starter is needed. IMPORTANT: Before replacing the existing fluorescent tube, the ballast and starter must be bypassed and the circuit reconnected. LLT-4-T8-D-SW-120-DM2-D-10-30K* LLT-4-T8-D-SW-120-DM2-D-10-41K LLT-4-T8-D-SW-120-DM2-D-10-50K LLT-4-T8-D-SW-120-DM2-D-10-60K* LLT-4-T8-C-SW-120-DM2-D-10-30K* LLT-4-T8-C-SW-120-DM2-D-10-41K LLT-4-T8-C-SW-120-DM2-D-10-50K LLT-4-T8-C-SW-120-DM2-D-10-60K* LLT-4-T8-D-SW-120-DM1-D-10-30K* LLT-4-T8-D-SW-120-DM1-D-10-41K LLT-4-T8-D-SW-120-DM1-D-10-50K LLT-4-T8-D-SW-120-DM1-D-10-60K* LLT-4-T8-C-SW-120-DM1-D-10-30K* LLT-4-T8-C-SW-120-DM1-D-10-41K LLT-4-T8-C-SW-120-DM1-D-10-50K LLT-4-T8-C-SW-120-DM1-D-10-60K* Lens Input Voltage 277V 277V 277V 277V 277V 277V 277V 277V 110V 110V 110V 110V 110V 110V 110V 110V

5 LED T8 Tube Ballast bypass (Type B) FA8 R17D G13 Base FA8, R17D, G13 30K, 35K, 40K, 50K, 60K CRI 85 Input Voltage 110V-277V Operating Temp. -20ºF-122ºF Power Factor >0.95 Output 5200lm Rated Life up to 50,000 hours Double-end wired on line voltage Universal driver 110V-277V and frosted lens All popular 8 f-t bases available (FA8, R17D, G13) : 130 lm/w CRI: 85 ETL The LED T8 Tube from Aleddra saves the end user the trouble of converting to fixtures. It can use the existing fixture and socket directly on line-voltage without replacing the sockets. The LED Tube can save up to 60% energy consumption and minimize the installation costs. It is the ideal option for the T8/T12 retrofit. 5-year warranty Length Base Wiring without Ballast Diagram AL-T8-40P8FT-FA8-30K AL-T8-40P8FT-FA8-35K AL-T8-40P8FT-FA8-40K AL-T8-40P8FT-FA8-50K AL-T8-40P8FT-FA8-60K AL-T8-40P8FT-R17D-30K AL-T8-40P8FT-R17D-35K AL-T8-40P8FT-R17D-40K AL-T8-40P8FT-R17D-50K AL-T8-40P8FT-R17D-60K AL-T8-40P8FT-R17D (G13) 30K AL-T8-40P8FT-R17D (G13) 35K AL-T8-40P8FT-R17D (G13) 40K AL-T8-40P8FT-R17D (G13) 50K AL-T8-40P8FT-R17D (G13) 60K FA8 FA8 FA8 FA8 FA8 R17D R17D R17D R17D R17D G13 G13 G13 G13 G K 6000K 6000K

6 G5 SureFit U-bend LED Tube 2 UL OOLV certified for plug and play, and UL IFAR certified for direct wire Fits all standard 2'x2' U-bend troffers and sockets Works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V Double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets) Field-replaceable internal driver Lens Type clear, diffused DLC 4.2 qualified UL Type A/Type B listed (OOLV #E479597) UL Type B classified (IFAR #E325073) clear lens 120 LPW diffused lens 100 LPW CRI > 80 Input Voltage Operating Temp. Power Light Output 27K, 30K, 35K, 40K, 50K 110V-277V (50-60Hz) -20ºF-122ºF Beam Angle 160º Ballast Rated Life 1800lm 1500lm Instant Start, Rapid Start up to 50,000 hours 5-year warranty Aleddra s SureFit T8 U-bend tube is a smart choice for retrofitting existing fluorescent U-bend T8 s with an energy efficient replacement without taking the costly alternative of complete fixture upgrades. Aleddra s U-bend T8 tube has a 6 separation between the two legs and will fit all standard 2 x2 U-bend troffers and sockets. The U-bend tube is double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets). It works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V. Using a Ballast The SureFit U-bend tube can directly replace the existing fluorescent U-bend without rewiring. Using Line Voltage The installation process is simple and straightforward. Bypass the ballast Connect line voltage directly to the stockets (hot on one end and neutral on the other) Insert the U-bend tube LLT-2U-T8--BA-C-27K LLT-2U-T8--BA-C-30K LLT-2U-T8--BA-C-35K LLT-2U-T8--BA-C-40K LLT-2U-T8--BA-C-50K LLT-2U-T8--BA-D-27K LLT-2U-T8--BA-D-30K LLT-2U-T8--BA-D-35K LLT-2U-T8--BA-D-40K LLT-2U-T8--BA-D-50K Lens Temp. 2700K 2700K Photos

7 T8/T12 Conversion Kit Linear Strip Fixture Conversion Low maintenance cost Suitable for all G13 T8 bi-pin LED tube (double-end LED tube is strongly recommended for safety reasons) Pre-wired conversion kit bracket for easy installation Nice white-paint glossy finish for professional look Pre-drilled holes for 8-4I to 2-2I conversion and ballast cover installation Details Each kit includes: G13 T8 bi-pin sockets (tombstones) Available Kits (8-4I) Conversion Kit lamps to four lamps (2-2I) Conversion Kit lamp to four lamps 8-4I conversion kit can be reconfigured in the field to 2-2I kit, saving the end user the trouble of having exact counts on both fixtures. UL Certified Aleddra s T8/T12 conversion kit is designed for linear fluorescent tube retrofit. Aleddra is well known for its EasiRetroFit double-end LED tube among the lighting professional. Now with this conversion kit, the end user with an linear strip can order both. The LED tube and the conversion kit that can give you energy efficiency and low costs for all your lighting retrofit projects. Kit-T8-8-4I Kit-T8-8-2I Two to four lamp conversion kit One to two lamp conversion kit

8 EasiFit T5 Ballast-Compatible Plastic LED Tube Direct-fit, plug & play with T5HO ballast Full nano plastic housing body, giving it the exact look and feel of fluorescent T5 and a very wide lighting angle Fits nicely into the existing T5 fixture without any rewiring Lighting is brighter Socket Type G5 (standard T5 lamp socket) UL Type A certified DLC 4.2 qualified LPW 30K, 35K, 40K, 50K CRI > 80 Input Voltage 110V-277V (50-60Hz) Operating Temp. -4ºF-113ºF Power 28W Light Output 2900lm to 3200lm Beam Angle 185º 5-years/50,000 hours Aleddra s EasiFit T5 LED tube lamp is a UL Type A internal driver tube that is compatible with F54 T5HO ballasts. With a price almost comparable to a T5 tube, our EasiFit tube lasts longer and has great energy savings. The end user can achieve savings on the retrofit investment. LLT-4-T K LLT-4-T K LLT-4-T K LLT-4-T K The EasiFit T5 LED tube features a full nano plastic body housing, giving it the exact look and feel of the fluorescent T5 and has a very wide lighting angle. It fits nicely into the existing T5 fixture without any rewiring, and the best part is that the light is brighter.

9 PLL LED Lamp - Ballast Bypass Ballast bypass (Type B) Target Replacement Lamps: FT/2G11 : 125 lm/w Energy efficient Cost-effective 5-year warranty Base 2G11 30K, 35K, 40K, 50K 17W 125lm/w Length 22 Input Voltage 110V-277V Operating Temp. -4ºF-120ºF UL certified Aleddra s PLL LED lamp is designed for replacing PLL lamp (2G11 base) that is used pre-dominantly with 2x2 troffer fixtures. This retrofit lamp avoids the costly fixture upgrade, saves 57.5% on lighting energy consumption from the start, and removes ballast maintenance costs once and for all for the end user. The PLL lamp is UL certified and comes with 5-year warranty. Power Factor 0.9 Dimmable Light Output Non-dimmable 30K/35K: 2100lm 40K/50K: 2200lm Length Base Rated Life up to 50,000 hours 5-year warranty APLL-23W-2800-BP-30K APLL-23W-2800-BP-35K APLL-23W-2800-BP-40K APLL-23W-2800-BP-50K G11 2G11 2G11 2G W 17W 17W 17W

10 LED CoolerTube External Driver 5-ft 6-ft Qualifies for Utility Rebates IP65 rating for moisture proof LED alternative for refrigerator lighting National grocers, supermarkets, and convenience stores are the perfect target audience for the CoolerTube Lens Type Driver Type Input Voltage Output Voltage clear external driver 100V-277VAC (50-60Hz) 36V DC culus DLC > 95 LPW (clear lens) 30K, 35K, 40K, 45K, 50K CRI > 80 Operating Temp. -20ºF-122ºF Power Factor >.90 Beam Angle 170º 5-year Aleddra, with its strong industry reputation with the EasiRetrofit LED tube for T12/T8 replacements, is now offering an LED alternative for refrigerator lighting. The CoolerTube is designed with a 170 degree beam angle, meeting the needs of merchandise lighting on both sides of the LED light, while maintaining a high efficacy at 95 lm/w and a power factor Length Lens National grocers, supermarkets, and con- LLT-4-FR-C-22W-35K LLT-4-FR-C-22W-40K LLT-4-FR-C-22W-50K LLT-5-FR-C-22W-35K LLT-5-FR-C-22W-40K LLT-5-FR-C-22W-50K LLT-6-FR-C-30W-35K LLT-6-FR-C-30W-40K LLT-6-FR-C-30W-50K 5-ft 5-ft 6-ft 6-ft 6-ft venience stores are the perfect target customer for the CoolerTube. It is used in coolers and refrigerators. In addition they benefit from Aleddra s EasiRetrofit T8 LED tube for their ceiling lighting. The features of the CoolerTube exceed any competitive products on the market.

11 LED E26 Screw-In Bulb E26 Base Same look-and-feel of an incandescent bulb Driver-less technology Rated for enclosed fixtures Energy efficient Cost-effective Long lasting Non-dimmable 2-year warranty UL Bulb Type LED A19, LED A21 Base E K, 4100K CRI >80 Beam Angle 200º Input Voltage AC90-135V 8W, 10W 800lm 1050lm Operating Temp. -20ºF to 120ºF The first LED screw-in bulb looks exactly like the incandescent bulb. There is no dark zone on the base of the bulb and the light shines below the base. Nobody will steal it. The most cost-effective direct replacement of 60W/75W incandescent bulb with 8W/10W A19 LED screw-in. Start the saving now. Dimensions Rated Life 15,000 hours 2 year warranty A19 A in diameter, 4.25 in height in diameter, 4.40 in height Before After Product Model AA19-8W-27K 8W 2700K AA19-8W-41K 8W 4100K AA21-10W-27K 10W 2700K AA21-10W-41K 10W 4100K The traditional A19 LED lamp has a hard cutoff of light at the dark base zone. The Aleddra A19 bulb doesn t have a dark zone at the base and puts out light beyond the base.

12 CF-LED Lamp E26, GX23-2, G24Q, GU24 bases 50% energy saving and 75% maintenance reduction Cost-effective Rated for enclosed fixture GX23-2 & G24Q bases are dual-mode: ballast-compatible and line voltage friendly E26 & GU24 bases are line voltage friendly Socket Type CRI > 80 Input Voltage 120 LPW E26, GU24 GX23-2 (2-pin), G24Q, (4-pin),, 110V-277V Operating Temp. -20ºF to 122ºF 6W, 11W Beam Angle 360º 5-year warranty Can be installed horizontally or vertically with the same beam spread as traditional lamps 5-year warranty UL and cul Type A/Type B listed (OOLV/OOLV7.E479597) UL and cul classified (IFAR/IFAR7.E325073) LDL Pending Aleddra s CF-LED lamp offers the first 360-degree LED PL lamp with 100 lm/w efficacy. Unlike other LED PL lampson the market today, this revolutionary lamp can be installed either vertically or horizontally with the same beam spread as traditional lamps. Size 6W: 1 3/8 W x 1 3/8 L x 4.5 H (top to socket edge, not including the in-socket length) 11W: 1 3/8 W x 1 3/8 L x 6.1 H (top to socket edge, not including the in-socket length) (GX23-2/G24Q) (E26/GU24) Model # Socket Replace HID Model # Socket Replace HID APL-6-D-GX K APL-6-D-GX K APL-6-D-GX K APL-11-D-GX K APL-11-D-GX K APL-11-D-GX K APL-6-D-G24Q-30K APL-6-D-G24Q-40K APL-6-D-G24Q-50K APL-11-D-G24Q-30K APL-11-D-G24Q-40K APL-11-D-G24Q-50K GX23-2 GX23-2 GX23-2 GX23-2 GX23-2 GX23-2 G24Q G24Q G24Q G24Q G24Q G24Q 790lm 790lm 790lm 1240lm 1240lm 1240lm 790lm 790lm 790lm 1240lm 1240lm 1240lm 6W 6W 6W 11W 11W 11W 6W 6W 6W 11W 11W 11W 13W 13W 13W 26W 26W 26W 13W 13W 13W 26W 26W 26W APL-6-A-E26-30K APL-6-A-E26-40K APL-6-A-E26-50K APL-11-A-E26-30K APL-11-A-E26-40K APL-11-A-E26-50K APL-6-A-GU24-30K APL-6-A-GU24-40K APL-6-A-GU24-50K APL-11-A-GU24-30K APL-11-A-GU24-40K APL-11-A-GU24-50K E26 E26 E26 E26 E26 E26 GU24 GU24 GU24 GU24 GU24 GU24 790lm 790lm 790lm 1240lm 1240lm 1240lm 790lm 790lm 790lm 1240lm 1240lm 1240lm 6W 6W 6W 11W 11W 11W 6W 6W 6W 11W 11W 11W 13W 13W 13W 26W 26W 26W 13W 13W 13W 26W 26W 26W

13 CF-LED U-Lamp E26, E39 HID/MH Replacement >95 LPW Socket Type E26, E39, G24Q (22W only) AC friendly (ballast must be bypassed) Compact design and half the weight of LEC Corn Light Up to 80% energy savings! Cost-effective HID/MH replacement Mounting style: Base-up (BU), Horizontal or Base-Down (BD) 22W to 50W may be used with enclosed fixture with sufficient housing space 80W not recommended for enclosed fixture 5-year warranty culus Listed DLC 4.0 (E39 base) LDL (E26 base) Patent Pending CRI,, > 80 (>90 optional) Input Voltage 110V-277V (bypassing ballast) Operating Temp. -20ºF to 122ºF Beam Angle 360º 22W, 30W, 50W, 80W Aleddra s CF-LED U-lamp is the most cost-effective retrofit option for HID lamp with up to 80% energy savings. Compared to LED Corn Light, it is superior in two aspects: half of the weight and smaller in size, which makes it a much better option for enclosed HID fixtures. 5-year warranty/50,000 hours This CF-LED U-lamp operates with 110 to 277V AC line voltage without any ballast. It is immediately available in E26 and E39 (mogul base) base. Diameter Length 22W W W W Model # Replace HID Model # Replace HID ALJ12-22U-830-G24Q ALJ12-22U-840-G24Q ALJ12-22U-850-G24Q ALJ16-22U-830-E26 ALJ16-22U-840-E26 ALJ16-22U-850-E26 ALJ16-30U-830-E26 ALJ16-30U-840-E26 ALJ16-30U-850-E26 22W 22W 22W 22W 22W 22W 30W 30W 30W 2100lm 2100lm 2100lm 2100lm 2100lm 2100lm 3400lm 3400lm 3400lm 65W 65W 65W 65W 65W 65W 100W 100W 100W ALJ16-50U-830-E26 ALJ16-50U-840-E26 ALJ16-50U-850-E26 ALJ16-50U-830-E39 ALJ16-50U-840-E39 ALJ16-50U-850-E39 ALJ16-80U-830-E39 ALJ16-80U-840-E39 ALJ16-80U-850-E39 50W 50W 50W 50W 50W 50W 80W 80W 80W 5000lm 5000lm 5000lm 5000lm 5000lm 5000lm 7500lm 7500lm 7500lm 175W 175W 175W 175W 175W 175W 250W 250W 250W

14 Disc Light Round LED Light Engine Easy integration to new fixture construction Application: Ceiling Light, Flush Mount Fixtures Integral driver-on-board Line-voltage dimmable Title 24 compliant 5 year warranty UL Certified, CRI 80 Input Voltage 110V AC Operating Temp. -20ºF to 120ºF 17W, 28W 1200lm The Disc Light is a cost-effective, high-performance retrofit option for ceiling light, drum fixtures, and flush mounted fixtures, without going through the trouble of replacing the complete fixture. Its line-voltage dimmable, making ideal replacement for dimmable incandescent light or CFL light (bypass ballast). Dimming Rated Life 2200lm Yes 50,000 hours 5 year warranty Dimensions Model # Dimension AL-4RLE-90-30K AL-4RLE-90-40K AL-7RLE-90-30K AL-7RLE-90-40K W 17W 28W 28W 1200lm 1200lm 2200lm 2200lm

15 EasiFit Troffer Kit 2x4, 2x2 Easy installation, no screw needed 0-10V Dimmable Certified for utility rebate CRI > 80 Input Voltage Operating Temp. 126 LM/W 30K (50W), 35K, 40K, 50K 110V-277V Power Factor >0.90 Size Weight Dimming -20ºF-122ºF 2x2: L x W x 2.6 H 2x4: L x W x 2.6 H 2x2 at 5.3lbs 2x4 at 10.8lbs 0-10V dimmable UL DLC 4.2 Premium Aleddra s EasiFit Troffer Retrofit Kit is an energy-efficient and cost-effective replacement for an existing linear troffer luminaire. It fits into the existing troffer housing, saving the labor of removing it and the trouble of disposing it. At the same time, it provides a more aesthetic appearance than the old fixture. The 0-10V dimming makes it controllable by the daylighting harvest system for further energy savings. 7-year (10-year optional) The EasiFit Troffer Kitis UL/DLC certified for utility rebate. Photos Size AT-R4--XDZ-35K AT-R4--XDZ-40K AT-R4--XDZ-50K AT-R4-25W-XDZ-35K AT-R4-25W-XDZ-40K AT-R4-25W-XDZ-50K AT-R4-36W-XDZ-35K AT-R4-36W-XDZ-40K AT-R4-36W-XDZ-50K AT-R7-25W-XDZ-35K AT-R7-25W-XDZ-40K AT-R7-25W-XDZ-50K AT-R7-36W-XDZ-35K AT-R7-36W-XDZ-40K AT-R7-36W-XDZ-50K 2x2 2x2 2x2 2x2 2x2 2x2 2x2 2x2 2x2 2x4 2x4 2x4 2x4 2x4 2x4 25W 25W 25W 36W 36W 36W 25W 25W 25W 36W 36W 36W

16 Linear Highbay Fixture 150W, 2, 320W Saves up to 70% energy as compared to existing highbay fixtures Meanwell driver 0-10V dimming by default Motion sensor: optional ETL DLC 4.2 >103 LPW CRI > 80 Beam Angle 120º Input Voltage 110V-277V Operating Temp. -20ºF-122ºF Dimming 0-10V Aleddra s Highbay Fixture features a stylish design and a slim profile. It is designed for any indoor lowbay or highbay application. It saves 70% energy as compared to existing highbay fixtures. It is DLC 4.2 qualified for utility rebate application. 5-year/50,000 hours Size AHLB-421-W150-50K AHLB-420-W240-50K AHLB-420-W320-50K 150W 2 320W lm lm lm 2x3 2x4 2x4 * 30K, 35K, 40K models are made to order * 480V driver made to order

17 UFO Highbay Fixture 60W, 100W, 150W, 210W Saves up to 70% energy as compared to existing highbay fixtures Stylish and modern design and a lower profile Designed for indoor lowbay or highbay application DLC 4.0 qualified for utlity rebate application DLC 4.0 Driver Meanwell driver >120 LPW 60W, 100W, 150W, 210W CRI > 70 Input Voltage 110V-277V Operating Temp. -20ºF-122ºF Dimming 1-10V dimmable Beam Angle 120º 5-year/50,000 hours Aleddra s UFO luminaire features a stylish design and a lower profile. It is designed for any indoor lowbay or highbay applications. It saves up to 70% energy as compared to the existing highbay fixtures. The UFO Highbay is DLC 4.0 qualified for utility rebate application. The default color is and other colors are optional. It can also accommodate the customer s need for spcial beam angles: 30, 60, 90, or 120 degrees. OD9.13 x H3.78, 60W OD13.46 x H W, 150W, 200W Voltage AHB-W060-50K AHB-W100-50K AHB-W150-50K AHB-W200-50K 60W 100W 150W 210W V-277V 110V-277V 110V-277V 100V-277V Light Distribution * 30K, 35K, 40K models made to order * 30, 60, 90, 150 degree beam angle made to order * 480V driver made to order

18 Economy LED Vapor Tight Luminaire 2, 4 Up to 50% Energy Savings Longer operational life Lower maintenance costs IP65 rated Motion sensor optional 10-year warranty Models Size Input Voltage Operating Temp. 2-lamp & 3-lamp available & 90V-305V (50-60Hz) -40ºF-140ºF UL certified Use with Aleddra s LED Tube 10-year warranty Aleddra s Economy Vapor Tight luminaire is a cost-effective upgrade for existing fluorescent vapor tight fixtures. The vapor tight fixture comes with a 10-year warranty. The fixture tombstones are double-end wired as shown on the right. The Economy vapor tight fixture is recommended to be used with Aleddra s LED tube that is UL and DLC certified for straightforward utility rebate application. With the standard G13 bi-pin sockets, the end user can easily upgrade to the latest Aleddra LED tube down the road. *Motion sensor (optional) The immediate benefits include a 50% savings on energy consumption, longer operational life, and lower maintenance costs. The Economy Vapor Tight fixture comes in a 2-lamp or 3-lamp configuration in or models. It has an IP65 rating, so it can be used in any wet location. It s ideal for stairwells, parking garages, and loading docks. *Lamp is not included and should be purchased Length # of Tube Voltage VTF-2-2 VTF-4-2 VTF V-277V 110V-277V 110V-277V

19 Slim Vapor Tight Sizes:,, Unique design and appearance, wide beam angle Various Product Applications: Parking lots, gas stations, supermarkets, office indoor lighting and more. Motion Sensor (optional) Emergency Backup (optional) 180 minutes on battery (6W light output) Battery check by remote control 5-year warranty Size 2ft,, 120lm/w UL certified IP65 rated CRI 82 Beam Angle 270º Input Voltage VAC Power Factor >0.9 Operating Temp. -14ºF to 104ºF Rated Life 50,000 hours The Slim Vapor Tight is the best quality enclosure that has a unique appearance and has a wide beam angle. Its built-in aluminum heat sink provides cooling and improves safety. It is IP65 rated. Optional features include the Motion Sensor and the Emergency Backup. 5-year warranty Dimensions Before Type, 20W, 36W, 70W Length Height Width After AVT-2FT-20W-50K AVT-2FT-20W-50K-MS AVT-2FT-25W-50K-EB AVT-2FT-25W-50K-MS+EB AVT-4FT-36W-50K AVT-4FT-36W-50K-MS AVT-4FT-45W-50K-EB AVT-4FT-45W-50K-MS+EB AVT-8FT-70W-50K AVT-8FT-70W-50K-MS AVT-8FT-70W-50K-EB AVT-8FT-70W-50K-MS+EB Size 20W 20W 25W 25W 36W 36W 45W 45W 70W 70W 70W 70W *MS (Motion Sensor) *EB (Emergency Backup) *Other colors made to order

20 LED Flood Light, 70W Driver CRI > 70 Input Voltage Operating Temp. Power Factor >0.90 AL-FL220-W K AL-FL220-W K AL-FL220-W K AL-FL280-W K AL-FL280-W K AL-FL280-W K AL-FL330-W K AL-FL330-W K AL-FL330-W K AL-FL390-W K AL-FL390-W K AL-FL390-W K AL-FL390-W K AL-FL390-W K AL-FL390-W K AL-FL675-W K AL-FL675-W K AL-FL675-W K AL-FL675-W K AL-FL675-W K AL-FL675-W K Meanwell driver LM/W 30K, 40K, 50K 30W to 600W 110V-277V (50-60Hz) -40ºF-122ºF 5-year warranty 30W 30W 30W 50W 50W 50W 100W 100W 100W W 210W 210W 400W 400W 400W 600W 600W 600W Weight Compact and light weight, wide range of wattage Higher wattage models can be used for sports field lighting Samsung LED doides Yoke mount bracket with easy lighting direction adjustment IP65 for wet location ETL DLC Aleddra s LED Flood Light is designed with versatility in mind. It s compact and light weight. It comes in a wide range of wattage, from 30W to 600W, for all types of outdoor lighting applications. The higher wattage models can be used for spor ts field lighting. Its yoke mount bracket provides easy adjustment for different lighting direction. When mounting on the building, it can be used as a good wallpack fixture. It can also be used on the ground or as a wall wash light. The default beam angle is 60 degrees. We also offer many other beam angles on a made-to-order basis. 400W: 28 H x 21 W 600W: 28 H x 27 W

21 Slim Shoebox Fixture 80W, 100W, 150W, 200W, 300W Lens Type Driver CRI >82 Input Voltage ASB-SBL-3-80W-50K ASB-SBL-3-100W-50K ASB-SBL-3-150W-50K ASB-SBL-3-200W-50K ASB-SBL-3-300W-50K Type III and Type V Meanwell driver 123 LPW 80W - 300W 50K (other colors optional) 110V-277V Power Factor >0.90 Operating Temp. Dimming Rated Life Other color made to order. -40ºF-140ºF Wireless dimming optional up to 50,000 hours 5-year warranty 80W 100W 150W 200W 300W Light Output 9840 lm lm lm lm lm Optional: Photo Cell, Wireless dimming controller, 480V driver Square/Round mounting brackets Energy-efficient and cost-effective replacement for existing parking lot lighting luminaire Slim exterior design yields less wind drag, protective cover on the back prevents bird from nesting Light Distribution: Type III & Type V Surge protection Options: Wireless dimming controller, Photocell, 480V driver, square/round mounting brackets IP65 wet location UL DLC 4.0 Aleddra s Slim Shoebox luminaire is an energy-efficient and cost-effective replacement for existing parking lot lighting luminaires. Its slim exterior design yields less wind drag and the protective cover on the back prevents bird from nesting on top of the fixture. It is UL certified for wet location lighting and comes with IP65 rating. The default mounting option is a slipfitter. Other square and round brackets are available upon request and can be easily serviceable in the field. The fixture is warranted for 5 years and the L70 hours of its LED diode exceed 100,000 hours. As an option, the fixture can be equipped with a 7-pin NEMA receptacle for use with a 3-in-1 wireless controller that allows the facility management team to turn on/off, set dimming level, schedule photocell activation, and program multiple fixtures through a centralized wireless lighting management system. Dimension: 30 x14.5 x3.5 Weight: 200W 27.6 lbs, 300W 28.4 lbs

22 3-in-1 Wireless Controller & System Ethernet Gateway Wireless Controller Wireless Controller Lite Microwave Sensor Network Type: star-mesh repeater Range: 3 km line of sight Standard: IEEE Frequency: MHz Power: +24 dbm Number of controllers supported: 2,000 Connection: 3G Cellular or 10/100 Ethernet Temperature: -22 to 158 F Input voltage: 120V (transformer needed for 277V) Cellular carrier certified IP66 rated FCC and IC compliant 5-year limited warranty Microwave Sensor Detecting range: Pedestrian: 100 Small vehicle: 165 Truck: 400 Connection to TOP900 wireless controller Bi-level timeout, tri-level timeout IP65 Power: +24 dbm Temperature: -22 to 158 F Size: 3.5 x3.5 x3.5 FCC approved, UL listed 5-year limited warranty TOP900TLX TOP900TLX-E MWX-LVE-180U LumeWave Gateway 2.0 Luminsight Desktop Central Management Software Product Wireless Controller Wireless Controller Lite Microwave Sensor Ethernet Gateway Lighting Management System TOP900LTX/E Wireless Controller 3-in-1 wireless controller: Wireless on-off and dimming (0-10V) Integrated Photo-cell Centralized lighting management Input voltage: V (480V optional) Motion sensor (optional) Secure AES 128-bit encryption Wireless standard: IEEE Frequency: MHz Range: 1 mile IP66 FCC approved, UL 916/773 listed, RoHS compliant Title 24 compliant 5-year limited warranty

23 Slim Lowbay Canopy, 70W Driver Meanwell driver 105 LM/W CRI > 80 Input Voltage 110V-277V Power Factor >0.95 Operating Temp. -40ºF-122ºF Rated Life up to 50,000 hours 5-year warranty Energy-efficient & cost-effective replacement for existing traditional lowbay canopy luminaire Built with top of the line LEDs and the reputable Meanwell driver IP65 wet location Die-cast aluminum housing Ideal for parking garage or low-ceiling canopy lighting applications Mounting Options: Surface mount, Pole mount, Base-plate mount UL DLC 4.0 Aleddra s Slim Lowbay Canopy Luminaire is an energy efficient and cost-effective replacement for an existing traditional lowbay canopy luminaire. It s built with top of the line LEDs and the reputable Meanwell driver, which means, fewer maintenance costs. Replacing Weight Its IP65 rating makes it ideal for wet locations. The Slim Lowbay Canopy Luminaire is UL certified and DLC qualified for utility rebate. It comes with a 5-year, 50,000 hours warranty. ACP K ACP-24-70W-50K 70W W 250W 5.5lbs 6.4lbs The application is ideal for parking garage or low-ceiling canopy lighting applications. * in stock, other colors made to order Dimension: 10.5 x 10.5 x 4 Option A: Surface Mount Option B: Pole Mount Option C: Base-plate mount

24 Quick Mounting Wall Pack AWP-WPL 4 Series Vandal Guard Light Guard More than 85% light transmission glass lens Application: outdoor walkways, security lighting, building entrances, schools, museum and commercial building Back fins on base cover, providing efficient heat dissipation Photocell installed by default 0-10V dimmable for great energy savings Light guard for dark-sky compliance (optional) Vandal protection guard (optional) Photo control and motion sensor (optional) 5-year warranty UL, DLC 4.2 IP65 rated lm/w CRI >80 Input Voltage 110V-277V The Quick Mounting Wall Pack is an energy-efficient and cost-effective replacement for the existing wallpack luminaire. Ideal for wet location with its IP65 rating. Superior die-cast aluminum housing with high-durability and long lasting color. A light guard can be attached to the fixture for dary-sky compliant application. Vandal protection guard is also available. Operating Temp. -40ºF-140ºF, 60W, 80W, 120W Power Factor >0.94 Photocell Built-in AWP-WPL-4--50K AWP-WPL-4-60W-50K AWP-WPL-4-90W-50K AWP-WPL-4-120W-50K 60W 90W 120W 4320lm 6545lm 9800lm 12720lm Dimmable 0-10V Rated Life up to 76,000 hours Dimensions 5-year warranty Size 40/60W: 9.25 x /120W: 8.9 x 18.3