Sayl. Work Chairs with Suspension Back. Designer Yves Béhar

Transcription

1 z Sayl Work Chairs with Suspension Back Designer Yves Béhar Inspired by suspension bridges structures that deliver the most using the least material Sayl s 3D Intelligent suspension back lets you stretch and move, striking a healthy balance between support and freedom. The elastomer strands vary in thickness and tension to provide greater support along the spine where you need it most, and less everywhere else, so you are free to move. Warranty 12-year, 3-shift. Sayl offers both 12-year and 5-year material warranties. Please visit hermanmiller.com/warranty-terms for details. hermanmiller.com/sayl Work Chair with Suspension Back Herman Miller, Inc.

2 z Sayl Work Chairs with Upholstered Back Designer Yves Béhar The foundational shell of the upholstered Sayl Work Chair provides dynamic support in a more traditional appearance. Available in high- or mid-back models, upholstered Sayl Chairs can be specified in an expressive range of textiles and colors, offering plenty of options for personalizing your chair. Warranty 12-year, 3-shift. Sayl offers both 12-year and 5-year material warranties. Please visit hermanmiller.com/warranty-terms for details. hermanmiller.com/sayl Mid-Back Work Chair with Upholstered Back High-Back Work Chair with Upholstered Back 2015 Herman Miller, Inc.

3 Y Sayl Seating Work Chairs/Stools Suspension Back Slate Grey SG 5B Red RO Green Apple 79 Berry Blue 3M Seat Textiles Fabric Zen Bubblegum 7305 Iron Ore 7310 Platinum 7311 Lipstick 7312 Petroleum 7313 Scarlet 7317 Late 7325 Sand 7333 Oatmeal 7334 Apple 7344 Mercury 7345 Citron 7349 Cloud Ash 7314 Fabric Cosmos Moonshadow 9101 Marigold 9102 Cashmere 9104 Mercury 9105 Pool 9106 Spice 9107 Avocado 9108 Suede 9109 Granite 9110 Rouge 9112 Walnut 9114 Noir 9115 Quince 9117 Y-Tower/Base Polished Aluminum Polished Aluminum 68 Armpad 63 Slate Grey SG 5B Mulberry 82 Spruce 61 Twilight 97 Family Work Chair with Suspension Back Mid Back Work Chair with Upholstered Back High Back Work Chair with Upholstered Back 4-Leg Side Chair with Suspension Back Sled Base Side Chair with Suspension Back The following information applies only to Sayl work chairs. Overview Maximum User Weight Population Range Back Support PostureFit Sacral Support Lumbar Support 350 lbs/159 kg 5th 98th Percentile Standard Seat Height Low-Height Range 15" 19" Standard-Height Range 16" 20½" Extended-Height Range 16½" 22" Seat Depth Fixed Seat 16" Adjustable Seat 16" 18" Tilt Tilt Limiter Tilt Limiter with Seat Angle Arm Options No Arms Fixed Arms Height Adjustable Arms Fully Adjustable 4D Arms Environmental Highlights Recyclability (Suspension Back) Up to 91% BIFMA level 3 GREENGUARD Gold Cradle to Cradle Silver Global GreenTag Green Rate Level A

4 HermanMiller SAYL Chair Seating that performs for you. Seat Height: Lever next to tilt tension knob, right side of chair Tilt Tension: Knob below right side of seat To raise seat: Take your weight off chair, lift tab up. To increase tension: Turn knob clockwise. To lower seat: While seated, lift tab up. To decrease tension: Turn knob counterclockwise. At the proper height, your feet should rest flat on the floor. Set the tilt tension to control the resistance you feel when leaning back. Seat Depth: Lever under left side of seat To increase depth: Pull lever out, slide thighs forward to adjust seat; release lever. To decrease depth: Pull lever out, push seat back and release lever. Forward Tilt: Front horizontal tab on left side of seat To position chair forward: Recline and flip lever down. To resume horizontal position: Recline and flip lever up. Engage forward tilt to support the thighs declined posture when performing intensive tasks such as keyboarding. In the proper position, you will have approximately three-fingers of clearance between the back of your knees and the seat edge. HermanMiller SAYL Chair 1 Adjustment Guide

5 Tilt Limiter: Back horizontal tab on left side of seat To engage: Recline and move tab up to define the limit of recline. To release: Lean forward and flip tab fully downward. Arm Width: To adjust arm width: Grasp armpad to pull in or push out. In the proper position, your arms should be in line with your shoulders. Engage the tilt limiter when you want to sit in an upright or partially reclined position. Lumbar Height: Back lever or pad, depending on work chair, behind Y-Tower. To raise or lower: Move back lever or pad behind Y-Tower up or down as needed. Arm Depth: To adjust arm depth: Grasp armpad and slide forward or backward. Adjust the lumbar height so that it comfortably supports the natural curve of your spine. Adjust for comfort. Avoid any pressure on wrists and elbows. In upholstered chairs the lumbar lever is located behind the Y-Tower. Arm Height: To raise arms: Grasp the arms and pull up gradually to desired height. Arm Angle: To pivot arms in or out: Grasp armpad and pivot to the left or right. To lower arms: Grasp arms and pull up to highest position, release, push down to lowest position and then raise to desired height. Adjust arm angle inward when using a keyboard; adjust arm angle outward when using a mouse. For maximum comfort, your arms should make contact with the armpad without any lift at your shoulders. HermanMiller SAYL Chair 2 Adjustment Guide