B W S 4 FRIENDS KITCHEN ID9.1 DENVER, COLORADO N Roslyn Street D E S I G N G R O U P PROPOSED INTERIOR ELEVATIONS DINING ROOM WEST SCALE:

Transcription

1 WOOD SLAT WALL (PAINTED GYP BEYOND). DETAIL TBD. 1X6 OAK SLATS. REF. REFLECTED CEILING PLANS 1 1/2" 9'-11 1/2" VIF B W S D E S I G N G R O U P 288 CLAYTON #303 DENVER, CO t: f: r o w l a n d + b r o u g h t o n architecture / urban design / interior design 234 e hopkins ave aspen, co o f 1830 blake st, ste 200 denver, co o f INTERNATIONAL COPYRIGHT LAWS PROHIBIT THE USE OF THESE DRAWINGS WITHOUT THE EXPRESS WRITTEN AUTHORIZATION OF THE ARCHITECT. THE DESIGNS CONTAINED WITHIN THESE DOCUMENTS BOTH IN WHOLE AND IN PART ARE INTENTED FOR CONSTRUCTION AT THE ADDRESS LISTED ON THE TITLE BLOCK. 6" 3'-0" WOOD SLAT WALL (PAINTED GYP BEYOND) ALL WOOD BOOTH AND BANQUETTE SEATING WITH PAINTED FRONT EDGE, COLOR TO MATCH BAR FRONT 1 A9.1 DINING ROOM WEST SCALE: 1/2" = 1'-0" POWDER COATED METAL SIGN - PROVIDE POWER CUSTOM WALL GRAPHIC 1'-0" 3'-4" 1'-2" 6" 6" 1'-0" 1'-0" 1'-0" 1'-6" PAINT PAINT, COLOR TBD 1/2" TEMPERED GLASS SHELVES 3'-7" 2'-7" CUSTOM WALL GRAPHIC PAINT POWDER COATED METAL SIGN - PROVIDE POWER ALL WOOD BOOTH AND BANQUETTE SEATING WITH PAINTED FRONT EDGE, COLOR TO MATCH BAR FRONT RECLAIMED WOOD WALL SOURCED POS STATION IN RECESSED NICHE WOOD WALL CAP - AND INSTALLED BY FIN ART - UNDER STAIRS WITH SHELF AND HANDRAIL MOUNTED TO RANDOM WIDTHS AND LENGTHS 2 DINING ROOM NORTH DRAWER BELOW. SUBMIT SHOP OTHER SIDE OF WALL A DRAWING FOR DESIGNER A9.1 SCALE: 1/2" = 1'-0" LOGO BURNED INTO A9.1 SCALE: APPROVAL WALL 72 1'-6" PAINT KEY PLAN 3/16" = 1'-0" 2 1 A9.1 A9.2 1, FRIENDS KITCHEN 2893 N Roslyn Street DENVER, COLORADO PROPOSED INTERIOR ELEVATIONS ISSUED FOR: DATE: CONCEPT # CONCEPT # CONCEPT # REVISION # CONCEPT SUBMITTAL SDRC SUBMITTAL # PRICING PACK PRICING PACK # CONSTRUCTION ID9.1

2 EDGE OF WALL BEYOND RECLAIMED WOOD WALL SOURCED AND INSTALLED BY FIN ART - RANDOM WIDTHS AND LENGTHS PAINT PAINT DYNAMIC ETCH-A-SKETCH GALLERY ON MILLWORK LEDGES. BLACKENED STEEL FRAMED GLASS AND BOTTLE RACK PAINTED WOOD FRAMED DOORS W/ CHICKEN WIRE INSET. LOCKABLE. 1X6 OAK SLATS PAINT B W S D E S I G N G R O U P 288 CLAYTON #303 DENVER, CO t: f: NOTE: ALL PAINT COLORS TBD. 9'-11 1/2" VIF HIDDEN DOOR TO STORAGE CLOSET BELOW STAIRS 1'-0" WHITE SOLID SURFACE TOP WITH LAMINATED FULL BULLNOSE EDGE HOOKS MOUNTED TO UNDERSIDE OF BAR TOP r o w l a n d + b r o u g h t o n architecture / urban design / interior design 234 e hopkins ave aspen, co o f 1830 blake st, ste 200 denver, co o f INTERNATIONAL COPYRIGHT LAWS PROHIBIT THE USE OF THESE DRAWINGS WITHOUT THE EXPRESS WRITTEN AUTHORIZATION OF THE ARCHITECT. THE DESIGNS CONTAINED WITHIN THESE DOCUMENTS BOTH IN WHOLE AND IN PART ARE INTENTED FOR CONSTRUCTION AT THE ADDRESS LISTED ON THE TITLE BLOCK. 1/6 OAK SLAT ATTACHED TO CEILING. SUBMIT FINISH OPTIONS FOR DESIGNER APPROVAL. WIRED GLASS OR CHICKEN WIRE INSETS AT SIDE DYNAMIC ETCH-A-SKETCH GALLERY 1 A9.2 2 A9.2 BAR OPTION 1 SCALE: SCALE: 1/2" = 1'-0" BAR - SOUTH 1/2" = 1'-0" KITCHEN BEYOND PAINT - COLOR TBD PAINT - WHITE 1'-0" 2 1/2" 3'-6" WAITING AREA (CHAIRS OR BENCH) LACQUERED WOOD BAR FRONT WITH FAUX RIVETS. COLOR TBD. SUBMIT SHOP DRAWING FOR DESIGNER APPROVAL. 3'-6" 6" 3'-5 3/4" 3'-4 1/2" 3'-4 1/2" 3'-4 1/2" 3'-5 3/4" OPTION 1 OPTION 3 CORRIDOR BEYOND 1X6 OAK SLATS. REF REFLECTED CEILING PLANS. WOOD SLAT WALL (PAINTED GYP BEYOND). DETAIL TBD. PLANTERS MOUNTED ON WALL 1'-6" 3'-0" 9'-11 1/2" LACQUERED WOOD BAR FRONT WITH FAUX RIVETS. COLOR TBD. SUBMIT SHOP DRAWING FOR DESIGNER APPROVAL. BLACKENED STEEL FOOT RAIL A A9.2 KEY PLAN SCALE: A /16" = 1'-0" 4 FRIENDS KITCHEN 2893 N Roslyn Street DENVER, COLORADO PROPOSED INTERIOR ELEVATIONS ISSUED FOR: DATE: CONCEPT # CONCEPT # CONCEPT # REVISION # CONCEPT SUBMITTAL SDRC SUBMITTAL # PRICING PACK PRICING PACK # CONSTRUCTION ID9.2

3 SURFACE MOUNTED LED FIXTURE FLUORESCENT WALL SCONCES WALL MOUNTED ADA SINK WITH ELECTRONIC CONTROL FAUCET EQ EQ EQ EQ 8'-0" HOOK PAINTED GYP CEILING SURFACE MOUNTED LED FIXTURE PAINTED GYP, TYP STAINLESS EDGE TRIM, BY GC, TYP. STAINLESS METAL WAINSCOT, TYP. RECESSED STAINLESS CHANGING STATION - INSTALL IN ALL BATHS HOOK 8'-0" HAND DRYER 3" B W S D E S I G N G R O U P 288 CLAYTON #303 DENVER, CO t: f: '-4" 6X12 COVE BASE - ARIZONA TILE FIBRA SERIES IN COLOR: SILK, TYP. 3'-8" 3'-10 1/2" 4'-0" 2'-10" 5'-4" 5'-4" r o w l a n d + b r o u g h t o n architecture / urban design / interior design 1 TYPICAL BATH 2 TYPICAL BATH 3 TYPICAL BATH 4 C L TYPICAL BATH BARRIER FREE CLEARANCE 234 e hopkins ave aspen, co o f 1830 blake st, ste 200 denver, co o f A9.3 SCALE: 1/2" = 1'-0" A9.3 SCALE: 1/2" = 1'-0" A9.3 SCALE: 1/2" = 1'-0" A9.3 SCALE: 1/2" = 1'-0" INTERNATIONAL COPYRIGHT LAWS PROHIBIT THE USE OF THESE DRAWINGS WITHOUT THE EXPRESS WRITTEN AUTHORIZATION OF THE ARCHITECT. THE DESIGNS CONTAINED WITHIN THESE DOCUMENTS BOTH IN WHOLE AND IN PART ARE INTENTED FOR CONSTRUCTION AT THE ADDRESS LISTED ON THE TITLE BLOCK. A A9.3 2 A SIM 2 SIM A9.3 KEY PLAN SCALE: 1/4" = 1'-0" 4 FRIENDS KITCHEN 2893 N Roslyn Street DENVER, COLORADO PROPOSED INTERIOR ELEVATIONS ISSUED FOR: DATE: CONCEPT # CONCEPT # CONCEPT # REVISION # CONCEPT SUBMITTAL SDRC SUBMITTAL # PRICING PACK PRICING PACK # CONSTRUCTION ID9.3

4

5

6

7 SPECIFICATION SHEET SLIVER WALL # LENGTH (IN) LAMP OPTIC MOUNT. FINISH SLIVER is a very small and slick wall linear luminaire. It is made from extruded and machined aluminum parts and it is available in (2) inch increments from 6 to 96 inches. LAMPING: 4.58W / FT WHITE LED STRIP, (SEE LAMPING ) DELIVERED LUMENS: TBC PROJECT NAME: TYPE: QTY: LAST UPDATE : JANUARY 17, 2014 ALUMINUM END CAP (X2, TYP.) ISOMETRIC VIEW LENGTH 06 ~ 96 - CHOOSE LENGTH* FROM 6 TO 96. (2 INCREMENT) *THESE ARE NOMINAL LENGTHS 36 POWER CABLE LAMPING 1/2" LD3-3000K W / ft, 320lm/ft. 7/8" LD4-4000K W / ft, 350lm/ft. TOP VIEW MOUNTING SYSTEM SEE LENGTHS FRONT VIEW 5/8" A- 90 MOUNTING 1" 1" SNAP-IN DIFFUSER 6 B- WALL MOUNTING 1-1/4" 120 FILM 1" 7/8" FROSTED FLOOD ALUMINUM EXTRUSION 4.58W / FT WHITE LED STRIP (SEE LAMPING) FULL LENGTH MOUNTING SLOT FOR ADJUSTABLE MOUNTING SYSTEM (SEE MOUNTING SYSTEM) CLEAR NARROW SECTION VIEW 1" C- INVISIBLE MOUNTING* ALL MOUNTING SCREWS AND SUPPORT SYSTEM ARE INCLUDED LENGTHS # OF MOUNTING SUPPORT INCLUDED 6 TO 24 2x MOUNTING SUPPORT INCLUDED 26 TO 48 3x MOUNTING SUPPORT INCLUDED 48 TO 72 4x MOUNTING SUPPORT INCLUDED 74 TO 96 5x MOUNTING SUPPORT INCLUDED OPTIC METAL FINISH FD- FROSTED FLOOD CL- CLEAR NARROW 01- WHITE 10- GRAY REMOTE POWER SUPPLY - 24VDC (TO BE ORDERED SEPARATLY) ONE FEED PER FIXTURE CONTACT FACTORY FOR MORE POWERFUL AND MULTIPLE FIXTURE LAYOUT 1-1/4 7/ W, 120V (UP TO 3 LINEAR FEET) 5-1/4 1-1/ /8 1-1/2 TRL W, 120V (UP TO 5 LINEAR FEET) 7-1/2 TRL W,120~277V (UP TO 10 LINEAR FEET) 8-1/2 1-3/8 1 BLACK (LINE) INPUT WHITE (NEUTRAL) TRL V DIMMING CONTROLLER 100W MAX. (ONE CONTROLLER PER POWER SUPPLY) WIRING DIAGRAM LED DRIVER 5-1/4 RED (POSITIVE) RED (POSITIVE) OUTPUT INPUT DC/DC LED OUTPUT LED ARRAY DIMMING WHITE (NEGATIVE) CONTROLLER WHITE (NEGATIVE) VIOLET (POSITIVE) 0-10V DIMMING SIGNAL GRAY (NEGATIVE) 9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7 P.: F.: DUE TO CONTINUOUS IMPROVEMENTS, THE INFORMATION HEREIN MAY BE CHANGED WITHOUT NOTICE. SLIVER WALL AP - R11

8

9

10 LINE VOLTAGE PENDANTS/SUSPENSION Powell Street Pendant DESCRIPTION Spun metal shade coated in a luxurious high gloss black or white paint for a truly dramatic appearance. Black, satin nickel, and white finish options include clear cable. Includes 120 volt, 150 watt or equivalent medium base G40 globe lamp or 32 watt GX24Q 3 triple tube compact fluorescent lamp surrounded by a blown white glass globe diffuser. Fixture is provided with six feet of field cuttable cable. Incandescent version dimmable with standard incandescent dimmer. INSTALLATION This product can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box. OTHER TD includes 4.5" Round Canopy. Black Finish Only Available on TD. CF277 Lamp Only Available on TD. satin nickel/sunrise orange ACCESSORIES & OPTICAL CONTROLS Line voltage Swag Hook WEIGHT 5.5lb / 2.49kg ± COLOR OPTIONS gloss black/white gloss white/white satin nickel/sunrise orange satin nickel/white ORDERING INFORMATION 700 SYSTEM PSP24 COLOR FINISH LAMP TD TT TT2 LINE VOLTAGE PENDANTS/SUSPENSION SINGLE CIRCUIT T~TRAK TWO CIRCUIT T~TRAK BW GLOSS BLACK/WHITE WW GLOSS WHITE/WHITE SO SATIN NICKEL/SUNRISE ORANGE SW SATIN NICKEL/WHITE B BLACK S SATIN NICKEL W WHITE INCANDESCENT 120V CF COMPACT FLUORESCENT 120V CF277 COMPACT FLUORESCENT 277V 700 PSP24 FIXTURE TYPE: JOB NAME: 7400 Linder Avenue Skokie, Illinois T F NOTES: Tech Lighting, L.L.C Tech Lighting, L.L.C. All Rights Reserved. The "Tech Lighting" graphic is a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right to change specifications for product improvements without notification.

11

12 BARRIER FREE LUCIA WALL-HUNG LAVATORY LUCIA WALL-HUNG LAVATORY VITREOUS CHINA Vitreous china 2" high Integral back splash For concealed arm installation Integral side shelves Shown with optional vitreous china shroud/ knee contact guard available Center hole only Center hole only with sealed overflow Faucet holes on 4" (102mm) centers Faucet holes on 4" (102mm) centers with sealed overflow Faucet holes on 8" (203mm) centers Faucet holes on 8" (203mm) centers with sealed overflow Shroud/Knee Contact Guard (Vitreous China) Shown With Optional Shroud/Knee Contact Guard SEE REVERSE FOR ROUGHING-IN DIMENSIONS Nominal Dimensions: 35-1/2" x 20-1/2" (900 x 520mm) Bowl sizes: 518mm (20-3/8") wide 330mm (13") front to back 140mm (5-1/2") deep Note: Must be installed with concealed arm carrier. Please allow proper wall depth clearance for concealed arm carrier support. Compliance Certifications - Meets or Exceeds the Following Specifications: ASME A / CSA B for Vitreous China Fixtures To Be Specified: Color: White Optional Vitreous China Shroud/Knee Contact guard: Faucet*: Faucet Finish: Supplies: 1-1/4" Trap: Nipple: * See faucet section for additional models available MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE- LINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. Top of front rim mounted 864mm (34") from finished floor AS America Inc. M7 Revised 1/12

13 BARRIER FREE LUCIA WALL-HUNG LAVATORY VITREOUS CHINA 35-1/2" (900mm) 4-1/2" (115mm) 24" (610mm) 3" (75mm) FINISHED WALL 2-1/2" (64mm) 7-3/4" (195mm) 4" (100mm) 20-1/2" (520mm) 1"D. (25mm) 16-1/8" (409mm) 12-1/2" (318mm) 1-11/16" (43mm) 3-7/8" (98mm) 7" 9-1/2" (180mm) (241mm) 24" (610mm) 20" (508mm) 11" (280mm) 5" (127mm) 3-1/4" (83mm) 1/2"D. (13mm) 2-3/16"D. (56mm) 3-1/4" (83mm) 9" 7-1/2" (229mm) (191mm) 34" (864mm) 24" (610mm) 3-1/2" (89mm) 8" MIN. (203mm) FINISHED WALL 9/16"D. (15mm) OPTIONAL SHROUD/ KNEE GUARD 27" MIN. (686mm) 6" MAX. (152mm) FINISHED FLOOR BARRIER FREE CLEARANCE 9" MIN. (229mm) NOTES: ALLOW PROPER WALL DEPTH CLEARANCE FOR CONCEALED ARM CARRIER SUPPORT. MUST BE INSTALLED WITH CONCEALED ARM CARRIER. LOOSE KEY ANGLE STOPS, LESS WALL ESCUTCHEONS. SUPPLIES REQUIRED. DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND P" TRAP ARE SUGGESTED. SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST BE TAKEN FROM FIXTURE. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE- LINES AND ANSI A117.1 ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES - CHECK LOCAL CODES. Top of front rim mounted 864mm (34") from finished floor AS America Inc. M8 Revised 1/12

14 FAUCET AT ALL REST ROOMS - Finish: Chrome - Integral Spout Temp Control - Center Hole Solar Powered, Electronic Hand Washing Faucet EAF-275 u Description Solar Powered, Sensor Activated Electronic Hand Washing Faucet for pre-tempered or hot and cold water operation. u Models EAF-275 x EAF-275-ISM EAF-275-ISM-IC Single Supply Faucet (For pre-mixed water only) With Integral Spout Temperature Mixer (For Hot and Cold water supply connection) With Integral Spout Temperature Mixer and i.q.-click Feature u Flow Rate x EAF gpm/1.9 Lpm Multi-Stream Laminar Spray Head u Specifications Solar Powered, Sensor Activated, Electronic, Chrome Plated Constructed Metal, Hand Washing Faucet with the following features: Modular One-piece Construction with all Concealed Components above deck Double Infrared Sensors with Automatic Setting Feature Automatic Self-adapting Sensor Technology Solar Powered Magnetic Solenoid Valve Water Supply Connection with Flexible High-pressure Hose and Strainer Appropriate Mounting Hardware included Includes 6 VDC Lithium Battery Back-up Power Source EAF-275-ISM The new Optima solar powered faucet Bringing intelligence to water Integral Spout Mixer The first solar powered electronic faucet's integrated power plant transforms light into electrical energy. Optimal performance any place, any time; in sunlight or even artificial light. The unique "Solar Energy Module" utilizes any light source efficiently. Trim Plates ETF-312-A Trim Plate for 4 (102 mm) Centerset Sink ETF-510-A Trim Plate for 8 (203 mm) Centerset Sink Sloan s new Optima EAF-275 Series electronic hand washing faucets operate by means of a dual infrared sensor and microprocessor based logic. The modular design incorporates all of the operating components of the faucet, including the sensor, solenoid, circuitry and solar energy module above the sink within a die-cast metal spout. u Variations x ISM u Accessories Trim Plates must be specified and ordered separately. Spout End Devices EAF gpm/8.3 Lpm Aerated Stream Spray Head EAF gpm/8.3 Lpm Laminar Stream Spray Head EAF gpm/5.7 Lpm Laminar Stream Spray Head EAF gpm/3.8 Lpm Laminar Stream Spray Head EAF gpm/1.3 Lpm Multi-Stream Laminar Spray Head Faucet Extension Kits EAF-35-A EAF-30-A Faucet Extension Kit Faucet Extension Kit (International Version has G1/2 inlet connections) Hose Length 18-7/8 (479 mm) Faucet Extension Kit (California OSHPD Requirement) Hose Length 15-1/8 (384 mm) EAF-40-A u Warranty 3 year (limited) u Compliant to: ISM models feature an integral temperature control lever which allows the user to adjust the water temperature. This adjustment can also be converted to a fixed setting. EAF faucets ordered without the ISM variation must be connected to a single, pre-tempered water supply. This space for Architect/Engineer approval Job Name Date Model Specified Quantity Variations Specified ASME A /CSA B , ISO/IEC Customer/Wholesaler Contractor Architect Solis EAF-275 S.S. Rev. 3a (06/11) The information contained in this document is subject to change without notice.

15 EAF-275 OPERATION 1. A continuous, invisible light beam is emitted from the sensor located at the front of the hand washing faucet. u u u Description Solar Powered, Sensor Activated Electronic Hand Washing Faucet for pre-tempered or hot and cold water operation. Flow Rate EAF gpm/1.9 Lpm Multi-Stream Laminar Spray Head ELECTRICAL SPECIFICATIONS u Control Circuit 6 VDC Includes Auto Set and Range Adjustment LED Sensor Range Nominal: 4-5 (102 mm mm) Faucet Adaptive Self-adjustment Range: 2-14 (51 mm mm) nominal u u Power Supply 6 VDC Solar Energy Module with 6 VDC Lithium Battery Back-up Power Source Time Out Setting 3 minutes Maximum time faucet will run upon continuous detection 3. When hands are moved away from the sensor, the loss of reflected light initiates an electrical signal that deactivates the solenoid valve shutting off the water flow. The circuit then automatically resets and is ready for the next user. 2. As the user s hands enter the beam s effective range, the beam is reflected back into the sensor receiver and activates the solenoid valve allowing water to flow from the faucet. Water will flow until the hands are no longer sensed or until the faucet reaches its automatic time out limit setting. 4-11/32 (110 mm) 24º 3-11/32 (85 mm) 5-11/32 (136 mm) 2-1/16 (52 mm) 2-1/16 (52 mm) 2-9/16 (65 mm) 6-11/16 (170 mm) 5-1/8 (130 mm) Optional EAF-35-A Faucet Extension Kit 2-1/8 (54 mm) ROUGH-IN EAF-275 Faucet with Single Line Water Supply EAF-275-ISM Faucet with Hot and Cold Water Supply Optional EAF-40-A Faucet Extension Kit for OSHPD Requirement O-RING GASKET RETAINER SPOUT 1-3/16 (30 mm) MIN. DIA. HOLE REQUIRED 1-1/2 (38 mm) MAX. DECK THICKNESS O-RING GASKET RETAINER SPOUT MIXING LEVER (Can Be Set and Removed) 1-3/16 (30 mm) MIN. DIA. HOLE REQUIRED 1-1/2 (38 mm) MAX. DECK THICKNESS When the EAF faucet is installed on a sink that has three (3) hole punchings, a Trim Plate should be used. Trim Plates must be specified and ordered separately: ETF-312-A Trim Plate for 4 (102 mm) Centerset Sink ETF-510-A Trim Plate for 8 (203 mm) Centerset Sink NUT 13 (330 mm) LONG FLEX HOSE NUT TEMPERED SUPPLY If a connection to separate hot and cold water supplies is desired, then a Bak-Chek tee fitting (not supplied) must be used prior to connecting to the faucet. HOT SUPPLY 13 (330 mm) LONG FLEX HOSES COLD SUPPLY SLOAN VALVE COMPANY SEYMOUR AVENUE FRANKLIN PARK, IL Phone: or Fax: or Copyright 2011 Sloan Valve Company Solis EAF-275 S.S. Rev. 3a (06/11)

16 BARRIER FREE MADERA FloWise 16-1/2" HIGH 1.1 GPF FLUSHOMETER toilet system with EVERCLEAN gpf 16-1/2" High Top Spud Bowl and Selectronic Exposed AC Flush Valve BOWL: Floor mount elongated flushometer valve toilet Vitreous china High Efficiency, Low Consumption. Operates in the range of 1.1 gpf to 1.6 gpf (4.2 Lpf to 6.0 Lpf) Permanent EverClean surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface 16-1/2" rim height for accessible application Powerful direct-fed siphon jet action Fully glazed 2-1/8" trapway Condensation channel 10" or 12" rough-in 10" x 12" water surface area 1-1/2" inlet spud 100% factory flush tested Less toilet seat Model SELECTRONIC FLUSH VALVE: Electronic flush valve with Selectronic proximity system for hygienic "Hands Free" operation Self-Cleaning Piston with integral wiper spring helps prevent clogging and reduces maintenance Piston operation delivers superior flush accuracy and repeatability Fully Mechanical Manual Override - allows valve to flush during a power failure Fail-Safe Operation - valve automatically closes, and does not need to be reset, on loss of power or water pressure Adjustable Sanitary Flush - valve automatically flushes after 24 hours of non-use to clean fixture and maintain trap seal Chemical resistant EPDM seals are unaffected by chloramines Sensor & electronic controls are fully enclosed and water resistant Range can be adjusted manually or with optional remote control Includes UL approved hardwired AC transformer Input Voltage: VAC, 50 / 60 Hz. Output Voltage: 6 VDC Adjustable tailpiece for rough-in flexibility Can be installed left or right hand Model Includes: A Inlet Spud (furnished with bowl) Bolt caps with retainers (furnished with bowl) Inlet includes 1" I.P.S. angle stop with back-flow protection, and vandal-resistant cap 1" Sweat solder kit, cover tube and wall flange Outlet includes 1-1/2" vacuum breaker with spud coupling and flange MADERA FloWise 16-1/2" HIGH 1.1 GPF FLUSHOMETER TOILET SYSTEM with EVERCLEAN SELECTRONIC EXPOSED AC FLUSH VALVE SEE REVERSE FOR ROUGHING-IN DIMENSIONS High-Efficiency Toilet System 31% water savings when compared to 1.6 gpf toilet systems Extra 11% water savings when compared to 1.28 gpf toilet systems System MaP Score: 800 grams of 1.1 gpf Operating Pressure: Overall Range: psi** Recommended: 25 psi (flowing)-80 psi (static) ** Water pressure over 80 psi is not recommended for most plumbing fixtures. Flow Requirement: 25gpm (94.6 L/min.) Nominal Fixture Dimensions: 718 x 356 x 419mm (28-1/4" x 14" x 16-1/2") To Be Specified: Color: White Seat: American Standard # Heavy duty open front less cover American Standard # Extra heavy duty open front less cover N AS America Inc. 4/12

17 BARRIER FREE MADERA FloWise 16-1/2" HIGH 1.1 GPF FLUSHOMETER TOILET SYSTEM with EVERCLEAN SELECTRONIC EXPOSED AC FLUSH VALVE Fixture Compliance Certifications - Meets or Exceeds the Following Specifications: ASME A / CSA B for Vitreous China Fixtures Valve Listings: ASSE 1037 ANSI/ASME A ADA Compliant Hubbel-RACO " ELECTRICAL BOX OR EQUIVALENT BY CONTRACTOR FINISHED WALL mm (2") HOLE FOR CONDUIT 86mm (3-3/8") 102mm (4") 718mm (28-1/4") 15 DETECTION ZONE 400mm-800mm (15-3/4" TO 31-1/2") 72mm (2-7/8") 305mm 45 (12" MAX.) SUPPLY DN 25mm (1" I.P.S.) 409mm (16-1/8") -C-L- -C-L- -C-L- 152mm (6") MIN. 470mm (18-1/2") C/L OF SEAT POST HOLES 140mm (5-1/2") CENTERS 293mm (11-1/2") 115mm -134mm (4-1/2" - 5-1/4") 829mm (32-5/8") 25mm (1") 356mm (14") 419mm (16-1/2") FINISHED FLOOR 13mm (1/2") 254mm (10") 150mm (5-7/8") 338mm (13-5/16") C/L OF OUTLET 238mm (9-3/8") *Note: The Critical Line (-C-L-) on Vacuum Breaker must typically be a minimum of 152mm (6") above fixture. Consult Codes for details. MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES. When installed so top of seat is 432 to 483mm (17" to 19") from the NOTES: TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON THE FLUSHOMETER VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING. THIS TOILET DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 254MM (10") AND A MAXIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. VALVE LEFT or RIGHT HAND INSTALLATION N AS America Inc. 4/12

18

19

20

21 Technical Data surface-mounted hat and coat hook B-682 B-6827 Specify Model Required: Model B-682 Bright polished stainless steel Model B-6827 Satin-finish stainless steel 3-1/16'' 80mm Finish Face of Wall 6-1/2'' 165mm 1/2'' 13mm 2'' 50mm Typ. 1'' 25mm Concealed Wall Plate Setscrew S S Recommended Mounting Height Off Floor for Barrier-Free Design 38'' to 40'' mm materials: Flange and Support Arm 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Concealed, 16-gauge (1.6mm) stainless steel mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew. Concealed Wall Plate 18-8 S, type-304, 16-gauge (1.6mm) stainless steel. Hook 18-8 S, type-304, 12-gauge (2.8mm) stainless steel. Welded to the support arm. installation: To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting bracket onto prongs of wall plate, then secure into position by tightening setscrew at bottom of flange. For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts, nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can be secured. For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with sheet-metal screws furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts. specification: Surface-mounted hat and coat hook shall be type-304 stainless steel with (insert one: bright polished or satin) finish. Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 16 gauge (1.6mm) mounting bracket that is secured to a concealed, 16-gauge (1.6mm) wall plate with a stainless steel setscrew. Hook shall be 12 gauge (2.8mm), welded to the support arm. Manufacturer's service and parts manual shall be provided to the building owner/manager upon request. Surface-Mounted Hat And Coat Hook shall be Model (insert model number) of Bobrick Washroom Equipment, Inc., Clifton Park, New York; Jackson, Tennessee; Los Angeles, California; Bobrick Washroom Equipment Company, Scarborough, Ontario; Bobrick Washroom Equipment Pty. Ltd., Australia; and Bobrick Washroom Equipment Limited, United Kingdom. The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet. Revised 6/06 Printed in U.S.A. The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions by Bobrick Washroom Equipment, Inc.