INSTALLATION INSTRUCTIONS

Size: px

Start display at page:

Download "INSTALLATION INSTRUCTIONS"

Joel Goodwin
6 years ago
Views:

1 INSTALLATION INSTRUCTIONS Accessory INTERIOR S P/N 08Z03-TX4-210A Application 2017 RDX Publications No. VERSION 1 Issue Date FEB 2016 PARTS LIST Right rear door panel Dashboard right panel Left rear door panel Dashboard left panel 3 Alcohol swabs Passenger s dashboard panel TOOLS AND SUPPLIES REQUIRED Masking tape Illustration of the Interior Panels in the Vehicle Console right panel LEFT FRONT RIGHT PASSENGER S Console left panel Right front door panel LEFT REAR RIGHT FRONT RIGHT QA01008AD Left front door panel 2016 American Honda Motor Co., Inc. All Rights Reserved. BII (1602) 08Z03-TX of 8

2 INSTALLATION Client Information: The information in this installation instruction is intended for use only by skilled technicians who have the proper tools, equipment, and training to correctly and safely add equipment to your vehicle. These procedures should not be attempted by do-it-yourselfers. NOTE: Do not damage the vehicle during installation. This kit should be installed only if the ambient air temperature is 15 C (60 F) or above. Align each part carefully. Attempting to detach the double-faced tape may damage the part or ruin the double-faced tape. 1. Using an alcohol swab, thoroughly clean the areas where the left front door panel, dashboard left panel, dashboard right panel, console left panel, and console right panel will attach. Clean with an alcohol swab. 2. Attach masking tape to the ends of the adhesive left front door panel. Remove the remaining 7 ADHESIVE QA00702AD 3. Align the left front door panel and attach it as shown. ALCOHOL SWAB CENTER QA00701AD QA00703AD 2 of 8 BII (1602) 2016 American Honda Motor Co., Inc. All Rights Reserved.

3 4. While applying light pressure against the left front door panel, carefully remove the 7. Align the dashboard left panel and attach it as shown. 7 ADHESIVE QA00704AD QA00706AD 5. Using your hand, firmly press the left front door panel against the left front door. 6. Attach masking tape to the ends of the adhesive dashboard left panel. Remove the remaining 8. While applying light pressure against the dashboard left panel, carefully remove the 3 ADHESIVE QA00705AD QA00707AD 9. Using your hand, firmly press the dashboard left panel against the dashboard American Honda Motor Co., Inc. All Rights Reserved. BII (1602) 3 of 8

4 10. Attach masking tape to the ends of the adhesive dashboard right panel. Remove the remaining 12. While applying light pressure against the dashboard right panel, carefully remove the RIGHT 3 ADHESIVE RIGHT QA00708AD 11. Align the dashboard right panel and attach it as shown. QA00710AD 13. Using your hand, firmly press the dashboard right panel against the dashboard. 14. Attach masking tape to the ends of the adhesive console left panel. Remove the remaining adhesive backings. 4 ADHESIVE RIGHT QA00709AD 4 ADHESIVE QA00711AD 4 of 8 BII (1602) 2016 American Honda Motor Co., Inc. All Rights Reserved.

5 15. Align the console left panel and attach it as shown. Align with the front end of the center console. 19. Using an alcohol swab, thoroughly clean the areas where the right front door panel and passenger s dashboard panel will attach. Clean with an alcohol swab. RIGHT FRONT CENTER QA00712AD 16. While applying light pressure against the console left panel, carefully remove the 4 ADHESIVE ALCOHOL SWAB QA00714AD 20. Attach masking tape to the ends of the adhesive right front door panel. Remove the remaining 7 ADHESIVE CENTER QA00713AD RIGHT FRONT 17. Using your hand, firmly press the console left panel against the center console. 18. Repeat steps 14 through 17 on the other side to install the console right panel to the center console. QA00715BD 2016 American Honda Motor Co., Inc. All Rights Reserved. BII (1602) 5 of 8

6 21. Align the right front door panel and attach it as shown. RIGHT FRONT 24. Attach masking tape to the ends of the adhesive passenger s dashboard panel. Remove the remaining RIGHT FRONT QA00716BD 22. While applying light pressure against the right front door panel, carefully remove the adhesive backings as shown. RIGHT FRONT PASSENGER S 25. Align the passenger s dashboard panel and attach it as shown. TOP VIEW QA01001AD PASSENGER S Equal spacing. 7 ADHESIVE RIGHT FRONT QA00717BD 23. Using your hand, firmly press the right front door panel against the right front door. PASSENGER S QA01002AD 6 of 8 BII (1602) 2016 American Honda Motor Co., Inc. All Rights Reserved.

7 26. While applying light pressure against the passenger s dashboard panel, carefully remove the 28. Using an alcohol swab, thoroughly clean the areas where the right rear door panel and the left rear door panel will attach. PASSENGER S : Clean with an alcohol swab. QA01003AD ALCOHOL SWAB 27. Using your hand, firmly press the passenger s dashboard panel against the dashboard. QA01004BD LEFT REAR : Clean with an alcohol swab. ALCOHOL SWAB LEFT REAR QA01009BD 2016 American Honda Motor Co., Inc. All Rights Reserved. BII (1602) 7 of 8

8 29. Attach masking tape to the ends of the adhesive right rear door panel. Remove the remaining 31. While applying light pressure against the right rear door panel, carefully remove the 30. Align the right rear door panel and attach it as shown. QA01005BD QA01007BD 32. Using your hand, firmly press the right rear door panel against the right rear door. 33. Repeat steps 29 through 32 on the other side to install the left rear door panel to the left rear door. QA01006BD 8 of 8 BII (1602) 2016 American Honda Motor Co., Inc. All Rights Reserved.

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Accessory EDGE P/N 08P20-TX4-200 Application 2018 RDX Publications No. VERSION 1 Issue Date MAY 2017 PARTS LIST TOOLS AND SUPPLIES REQUIRED Left front door edge film Shop towel