MAG. FLB100 series Pedestrian Automatic Flap Barrier. General Description. Application. Features. Specification sheet. Date: April 2012, Revision: V1

Size: px

Start display at page:

Download "MAG. FLB100 series Pedestrian Automatic Flap Barrier. General Description. Application. Features. Specification sheet. Date: April 2012, Revision: V1"

Brandon French
6 years ago
Views:

1 Specification sheet FLB100 series Pedestrian Automatic Flap Barrier MAG Date: April 2012, Revision: V1 General Description MAG FLB101 and FLB102 is brand new product of MAG. Flap barrier, as the upgraded version of the tripod turnstile and swing barrier, is a hi-tech product for pedestrian access control. Flap barrier is the combination of machinery, electronic, CPU control and variety of personal authentication identification technology. IC card, ID card, code bar, and fingerprint identification unit are compatible with the flap barrier. Flap barrier motor can be classified into single motor and double motors. The single one is used for single lane and the double one is used for multi- lanes. Application MAG FLB101 and FLB102 are suitable for indoor application only. It is NOT suitable to be installed outdoor or near sea side. Precise craftsmanship, comprehensive functions and high technology. FLB101 and FLB102 always install in high class communities, intelligent buildings, hotels, subway stations and other high level venues. Features MAG FLB101 and FLB102 adopt the integration of machinery and electronic structure, with special drive style, stable and reliable machinery auto locking solution, precise worm gear, and cabinet composite structure. Infrared photocells to detect abnormal access, and flap system will stay locked if not receiving authorized signal. Auto-alarm will activate for unauthorized access. Pedestrian flow directions can be single or double directions. Available for two-way traffic lights, which can prompt the state pass or no-entry. LED indicator function. Traffic lights on both sides of the flap barrier are the indicator of access status, When the traffic lights show green, it means to pass and the red light means no-entry. The traffic lights on both sides can be set to indicate access for left or right or bi-direction. Auto-reversing function. Flap gate will auto reverse when meeting exterior force to protect motor and also minimize the damage dealt to user. Time-out protection. When the flaps open and no person pass through, the system will automatically close after fixed time passes. During power failure, flaps will automatically retract and allowing free pass through. Automatically close back after power supply recover 2012 FLB Series Flap Barrier 1

2 Technical specification Description Cabinet dimension Stretching-out flap length Cabinet material Power supply Motor voltage Parameter 1400mm (L)*300mm (W)*1003mm (H) 275mm # 304 stainless steel AC220±15%V 50Hz/ AC110±15%V 60Hz DC 12V (brush motor) dry contact or 12V electrical level signal or > Access device input voltage 100ms12V impulse signal or driving current > 10mA Max flow rate 30 to 40 people per minute Flap opening/closing time 0.5s Reset time when power on 3s Working environment outdoors (with due shelter) and indoors Working temperature Relative humidity 90% Dimension Specification 1000mm 1400mm Front View 270mm Left View Side View 2012 FLB Series Flap Barrier 2

3 Motor View LED Display Pattern Direction from Left Default Direction from Right Components & parts Turnstile Cover Built in acrylic plate Built in acrylic plate LED Display Built in stainless steel to mount external device Cabinet Part Motor Part 2012 FLB Series Flap Barrier 3

4 Top View Installation For this installation, please refer to the below figure to make sure the separate flaps in the same line. Cabinet A must deviate 26mm in terms of the cabinet B spot, and cabinet C must deviate 26mm in terms of the cabinet B spot. A B C 50mm 1400mm 600mm 26mm Base Installation Build mounting base and put the wire tubes for 3 x 1.5 mm 2 for single- phase power line and 8 x 0.5 mm 2 for controlling line; Please refer to the diagram beside: use 8 expansion bolts to fix the flap barrier to the base. Then connect the power line and place the control lines to the control case. Connect the Master and the Slave with control line in numerical order Typical installation for Multiple Lane FLB101 FLB102 FLB102 Multiple FLB102 FLB FLB Series Flap Barrier 4

5 Ordering info Model Description Diagram FLB101 Flap Gate with Single Wing FLB102 Flap Gate with Double Wing Authorized dealer: Disclaimers Applications that are described herein for any of these products are for illustrative purposes only. Drawing does not necessary reflect exact assembly/installation. MAG makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. MAG reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. MAG assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or masks work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. MAG. All rights reserved. Date released: 18 June FLB Series Flap Barrier 5

MAG. BR500 intelli BARRIER Intelligent Vehicle Barrier Gate. General Description. Application. Features

MAG. BR500 intelli BARRIER Intelligent Vehicle Barrier Gate. General Description. Application. Features Specification sheet BR500 intelli BARRIER Intelligent Vehicle Barrier Gate MAG Date: 18 September 2011, Revision: V2 General Description MAG BR500 series intelli barriers utilize innovative technology