HYDRAULIC DOOR OPENER

Transcription

1 HYDRAULIC DOOR OPENER HR5 - GHR5 - PHR5 - MHR5 TRANSPORT CASES

2 DOOR OPENER HR5 Made for open wooden, metal or UPVC doors, single or multi-lock inward opening doors. The HR5 is placed horizontally on the door frame. It is equipped with an exclusive telescopic rod system with a extend quick-lock and it can be adjusted in length to reduce installation time in front of the door All rights reserved - Specifications are not contractually binding. With the aim of improving its products, LIBERVIT reserves the right to modify their specifications without prior notice - LIBERVIT patented products and registered mark. For power supply the HR5, it requires either one of the LIBERVIT hydraulic power units (see page 65) or a LIBERVIT hand pump (see page 73). An adapted hydraulic hose is necessary to connect the tool to the hydraulic power unit or hand pump (see page 79). All our tools are equipped with quick-fastening anti-pollution connection. Hydraulic door opener HR5 HR5 Horizontal ram force 50 kn Stroke ram horizontal MIN : 669 mm inch MAX : 957 mm inch Push ram force 60 kn Stroke push ram 285 mm inch 670 x 469 x 80 mm x x 3.15 inch Weight of door opener 15.7 kg lbs Delivered in PELICASE transport case yes Optional, coupling cap to protect the hydraulic coupling. (ref. BF) The average time required for the installation and breaching of an averagely resistant door, equipped with three lock points, is less than 30 seconds. Once the door has been breached and the release switch has been activated, the tool can be immediately removed from the door. All control switches are on the tool itself, which means that not only installation of the horizontal cylinder can be carried out by one person, but also activation of the jack push-force.

3 DOOR OPENER HR5 For double-door opening an extension is supplied, that is installed manually and in a couple of seconds. The extension can be installed both left or right side. If it is used with one of the LIBERVIT hydraulic power units, the HR5 can also be remotely controlled once installed, ensuring complete safety for the operator in any high-risk situation or when working with an explosive-rigged door. Hand remote control Extension R36 Weight Delivered with HR5 Foot remote control R x 72,5 x 75 mm x 2.85 x 2.95 inch 1.8 kg lbs yes HYDRAULIC DOOR OPENER - MMIDDLE RANGE

4 PLATES HR5 The horizontal ram of the HR5 is equipped with manually-removable plates. There are three sorts available: 2015 All rights reserved - Specifications are not contractually binding. With the aim of improving its products, LIBERVIT reserves the right to modify their specifications without prior notice - LIBERVIT patented products and registered mark. Non-slip base plate, ref. PP/HR5, ensures a correct grip to the horizontal ram, especially for doors equipped with an anti-breach angle. Base plate PP/HR5 PP/HR5 of 1 base plate x 72 x 40 mm 2.94 x 2.83 x 1.57 inch Weight of 1 base plate 750 g lbs Non-slip base plate with hook, ref. PR/HR5, can be inserted where necessary between the door and the door frame guaranteeing an additional grip for the ram during its pushing action. Base plate with hook PR/HR5 PR/HR5 of 1 base plate x 72 x mm 2.94 x 2.83 x 2.27 inch Weight of 1 base plate 800 g lbs The large non-slip base plates with hook, ref. PRL/HR5, are especially dedicated for doors with decorative moldings. Large base plate with hook PRL/HR5 PRL/HR5 of 1 base plate x 92 x mm 2.94 x 3.62 x 2.39 inch Weight of 1 base plate 1.3 kg lbs

5 PLATES HR5 for UPVC DOOR Non-slip base plate with hook, ref. PRL125/HR5, can be inserted where necessary between the door and the door frame guaranteeing an additional grip for the jack during its pushing action. Base plate with hook PRL125/HR5 PRL125/HR5 of 1 base plate 95 x 120 x 60 mm 3.74 x 4.72 x 2.36 inch Weight of 1 base plate 1.22 Kg - 2,20 lbs The large non-slip notched base plate with hook, ref. PRL180/HR5, can be inserted where necessary between the door and the door frame guaranteeing an additional grip for the jack during its pushing action. Large base plate notched with hook PRL180/HR5 PRL180/HR5 90 x 180 x 70 mm 3.54 x 7.08 x 2.75 inch Weight of 1 base plate 1.7 kg - 2,20 lbs The extra-larges non-slip base plate, ref. PRL300/HR5, are dedicated specially for doors with moulding decoration frame. Extra large base plate PRL300/HR5 PRL300/HR5 70 x 300 x 40 mm 2.75 x x 1.57 inch Weight of 1 base plate 1.3 kg lbs The special UPVC manually-removable plates are packed in a seal-proof case that is lined in black high-density mousse. An imprint of the tool or tools is made in the mousse to guarantee a perfect fit and optimal protection for the tools during transport or storage. HYDRAULIC DOOR OPENER - MMIDDLE RANGE

6 KIT GHR5 The GHR5 kit includes a GHP hydraulic power unit, that can be used and transported on the back, and with HR5 hydraulic door opener. This breaching kit ensures open multi-lock inward opening doors All rights reserved - Specifications are not contractually binding. With the aim of improving its products, LIBERVIT reserves the right to modify their specifications without prior notice - LIBERVIT patented products and registered mark. All our tools are equipped with quick-fastening anti-pollution connection. To activate the HR5 from a distance, it is possible to use the hand or foot remote control,both are convertible radio or with an electric wire. Hand remote control Power cable Kit GHR5 GHR5 Hydroelectric power unit ref. GHP Push force 300 bar Hydraulic hose included on GHP 1.50 m. / 3.2 ft Power unit dimensions 500 x 240 x 260 mm x 9.45 x inch Power unit weight 20 kg lbs Hand radio remote control 1, wire convertible Foot radio remote control 1, wire convertible Power cable yes, 5 m. / ft Hydraulic hose 3m. / 9,84 ft - réf. LF3P Packed in PELICASE transport case optional HR5 Horizontal ram force 50 kn Stroke ram horizontal MIN : 669 mm inch MAX : 957 mm inch Push ram force 60 kn Stroke push ram 285 mm inch 670 x 469 x 80 mm x x 3.15 inch Weight of door opener 15.7 kg lbs Non-slip base plates 2 Non-slip base plates with hook 2 Large non-slip base plates with hook 2 Extension 1 Packed in PELICASE transport case yes, ref. VDT/HR5 Foot remote control

7 KIT PHR5 The kit PHR5 kit equipped with POWERCASE hydraulic power unit, for maximal discretion, and with the HR5 hydraulic door opener. This breaching kit ensures open multi-lock inward opening doors. To activate the HR5 from a distance, it is possible to use the hand or foot remote control,both are convertible radio or with an electric wire. Kit PHR5 Hydraulic power unit Push force Hydraulic hose Power unit dimensions Power unit weight Hand radio remote control Foot radio remote control Power cable Door opener Horizontal ram force Stroke ram horizontal Push ram force Stroke push ram Hand remote control PHR5 ref. POWERCASE 300 bar 3m. / 9.84 ft, ref. LF3P 500 x 240 x 260 mm x 9.44 x inch 20 kg / 44 lbs 1, wire convertible 1, wire convertible yes, 5 m. / ft ref. HR5 50 kn MIN : 669 mm inch MAX : 957 mm inch 60 kn 285 mm inch 670 x 469 x 80 mm x x 3.15 inch 15.7 kg lbs ref. ST/HR5 Weight of door opener Transport bag Delivered in PELICASE transport case yes Non-slip base plates 2 Non-slip base plates with hook 2 Large non-slip base plates with hook 2 Extension 1 Delivered in PELICASE transport case yes, ref. VDT/HR5 Power cable Foot remote control HYDRAULIC DOOR OPENER - MMIDDLE RANGE

8 KIT MHR5 The kit MHR5 kit includes a PMP64 manual hydraulic pump, often reserved at explosive atmospheres, and with the HR5 hydraulic door opener. This breaching kit ensures open multi-lock inward opening doors All rights reserved - Specifications are not contractually binding. With the aim of improving its products, LIBERVIT reserves the right to modify their specifications without prior notice - LIBERVIT patented products and registered mark. Kit MHR5 Manual pump Material Operating pressure Two speeds Weight (with oil) Hydraulic hose PELICASE transport case Transport bag Door opener Horizontal ram force Stroke ram horizontal Push ram force Stroke push ram MHR5 ref. PMP64 black anodised aluminium 300 bar yes 640 x 200 x 170 mm x 7.87 x 6.69 inch 6 kg lbs 3m. / 9.84 ft, ref. LFM3P optional optional ref. HR5 50 kn MIN : 669 mm inch MAX : 957 mm inch 60 kn 285 mm inch 670 x 469 x 80 mm x x 3.15 inch 15.7 kg lbs Weight of door opener Non-slip base plates 2 Non-slip base plates with hook 2 Large non-slip base plates with hook 2 Extension 1 Delivered in PELICASE transport case yes, ref. VDT/HR5

9 The HR5 door opener is packed in a seal-proof case. Empty case, reference VDT/HR5. TRANSPORT CASE The VDT/HR5 case is lined in black high-density mousse. An imprint of the tool or tools is made in the mousse to guarantee a perfect fit and optimal protection for the tools during transport or storage. We have chosen the brand PELICASE as a guarantee for quality and long life. All our cases meet military and air transport standards. They are equipped with wheels and a removable carrying handle. The VDT/HR5 case is is delivered, in series when purchasing a HR5 door opener. Transport case PELICASE for HR5 VDT/HR5 Colour black 616 x 494 x 221 mm x x 8.70 inch Weight, empty 6.5 kg lbs HYDRAULIC DOOR OPENER - MMIDDLE RANGE