Sensors/Transducers. Resistance Temperature Device (RTD) resistance-based temperature measurement. Thermistor resistance-based temperature measurement
|
|
|
- Veronica Johnston
- 6 years ago
- Views:
Transcription
1 Sensors/Transducers Resistance Temperature Device (RTD) resistance-based temperature measurement Thermistor resistance-based temperature measurement 300 Ω resistor in voltage divider circuit Ω resistor in voltage divider circuit Model: U.S. Sensor PPG102C1 Transducer: voltage divider (R = 300 Ω) Wires: red power (5 V), black ground, blue output voltage Response: linear Model: Vishay BCcomponents Transducer: voltage divider (R = Ω) Wires: red power (5 V), black ground, blue output voltage Response: semi-log
2 Sensors/Transducers Photocell resistance-based luminescence measurement Humidity Sensor capacitive-based humidity measurement 300 Ω resistor in voltage divider circuit integrated transducer & signal conditioners Model: Senba GL5528 Transducer: voltage divider (R = 300 Ω) Wires: red power (5 V), black ground, blue output voltage Response: log-log Model: Honeywell HIH-4030 Transducer: none Wires: red power (5 V), black ground, blue output voltage Response: linear
3 Sensors/Transducers 3-Axis Accelerometer capacitance-based acceleration measurement Pressure Transducer capacitance-based pressure/flow measurement tube for port 1 tube for port 2 integrated transducer & signal conditioners Model: Analog Devices ADXL335 Transducer: integrated Wires: red power (3.3 V), black ground, blue output voltage (x-acceleration), white output voltage (y-acceleration), green output voltage (z-acceleration) Response: linear integrated transducer & signal conditioners Model: Freescale Semiconductor MPXH6400A Transducer: integrated Wires: red power (5V), black ground, blue output voltage (port 1), white output voltage (port 2) Response: linear
4 Sensors/Transducers Strain Gage resistance-based strain/deflection measurement Model: Measurements Group CEA UW-120 Transducer: Wheatstone Bridge Wires: N/A Response: linear
5 Signal Conditioners Reconfigurable Signal Conditioning Box reconfigurable junction box to generate amplified or filtered data BNC input port (-V) various resistor & capacitor ports for multiple op/amp and filter configurations BNC output port input power BNC input port (+V)
6 Voltmeters and Signal Processors Sensor Interface Box DC voltmeter and signal processor for multiple sensors multiple input ports depending on sensor configuration Advantages: portable, configured for class sensors, configured for 2 sensors, multiple connection styles, compatible with external recording Disadvantages: fixed resolution, voltmeter only multiple 3-pin output connections to connect to external digital recording device
7 Voltmeters and Signal Processors Craftsman Handheld Multimeter meter and signal processor for multiple measurements dial to select resistance, AC or DC voltage, current, or air temperature measurement high current input Advantages: portable, multiple measurement capabilities, multiple resolutions (low to high) Disadvantages: not configured for class sensors, single connection style, not compatible with external recording voltage, low current, resistance of temperature input ground or reference line input
8 Voltmeters and Signal Processors Hewlett-Packard 3468A Benchtop Multimeter meter and signal processor for multiple measurements Advantages: multiple measurement capabilities, very high resolution, 2- and 4-wire resistance measurement for high accuracy Disadvantages: not portable, not configured for class sensors, single connection style, not compatible with external recording buttons to select resistance, AC or DC voltage, or current measurement inputs
9 Voltmeters and Signal Processors Tektronix TDS 3012B Digital Oscilloscope voltmeter and signal processor for high-speed measurements output screen with signal waveform inputs Advantages: high speed measurements up to 100 (MHz), extracts waveform, multiple channels, data recording Disadvantages: not portable, voltage measurements only
10 Voltmeters and Signal Processors Vernier LabQuest Sensor Box signal processor for multiple sensors Can interface with Sensor Interface Box to digitally record voltage output
11 Power Supplies Tektronix PS282 DC Power Supply Used to apply DC power to an experimental apparatus typically to drive a physical stimulus but also for powering the measurement apparatus including the sensors, Signal Conditioning Box, and Sensor Interface Box connecting ports
12 Power Supplies BK Precision 4007DDS Function Generator Used to apply AC power to an experimental apparatus typically to drive (or mimic) a physical stimulus waveform selection connecting ports
MECHATRONICS LAB MANUAL
MECHATRONICS LAB MANUAL T.E.(Mechanical) Sem-VI Department of Mechanical Engineering SIESGST, Nerul, Navi Mumbai LIST OF EXPERIMENTS Expt. No. Title Page No. 1. Study of basic principles of sensing and
Higher Homework One Part A. 1. Four resistors, each of resistance 20Ω, are connected to a 60V supply as shown.
Higher Homework One Part A 1. Four resistors, each of resistance 20Ω, are connected to a 60V supply as shown. a) Calculate the total resistance of the circuit. b) Calculate the current drawn from the supply.
7526A Precision Process Calibrator. Calibrate temperature, pressure, and low dc voltage process tools in a single benchtop instrument
7526A Precision Process Calibrator Calibrate temperature, pressure, and low dc voltage process tools in a single benchtop instrument The 7526A Precision Process Calibrator calibrates a wide range of pressure
Higher - Electricity Powerpoint Answers
Higher - Electricity Powerpoint Answers 1. Electrical current is defined as the number of coulombs of charge that pass a point per second. 2. Potential difference is defined as the energy given to each
TEST AND CALIBRATION SERVICES Ensuring quality and reliability.
> TEST AND CALIBRATION SERVICES Ensuring quality and reliability www.thalesgroup.com.au TEST AND CALIBRATION SERVICES ENSURING QUALITY AND RELIABILITY Introduction Thales Australia s Test and Calibration
Contents. Pressure measurement technology Pressure calibrators 18 Exercises 19-20
1 Pressure Contents Topics: Slide No: Pressure measurement technology 03-17 Pressure calibrators 18 Exercises 19-20 2 Pressure Gauges Barometer Used to measure Barometric Pressure Reference is 0 psia,
Conditioning electronics for resistive sensors. It s not convenient to adopt a voltage divider in case of resistive sensors!
It s not convenient to adopt a voltage divider in case of resistive sensors! Low resolution: a small d will produce a negligible dout; Low amplification (gain) can be used due to voltage offset which saturates
EMaSM. Principles Of Sensors & transducers
EMaSM Principles Of Sensors & transducers Introduction: At the heart of measurement of common physical parameters such as force and pressure are sensors and transducers. These devices respond to the parameters
Weatherproof Tubular Slip Ring Assembly
Weatherproof Tubular Slip Ring Assembly Model B8-4.3W 8 circuit weatherproof slip ring Compact design Mounts on shafts up to 4.3 [109.2 mm] in diameter Permanently lubricated bearings Rugged stainless
Time Electronics. Calibration, Test and Measurement. Portable Process and Pressure Calibration Instruments
Time Electronics Calibration, Test and Measurement Portable Process and Pressure Calibration Instruments Calibrators Simulators Sources Pumps Gauges www.timeelectronics.com Loop & Temperature Calibration
FORCE SENSORS FORCE SENSORS
FORCE SENSORS We are a pioneer in the design and manufacture of precision force sensors for applications that require high performance or unique packaging, including electromechanical flight control, test
VIBRATION SENSORS VIBRATION SENSORS
VIBRATION SENSORS TE has spent more than 20 years designing and manufacturing s based on our proprietary Microelectromechanical System (MEMS), bonded gage and piezoelectric ceramic/film technologies. Voltage
Measurements Lab (620451):
Measurements Lab (620451): To introduce the practical side of actuators and sensors, also helping to understand how that device can be used. 1. INTRODUCTION FOR MEASURMENT 2. NOISE MEASUREMENT 3. PIEZO-ELECTRIC
ELECTRICAL ENGINEERING DEPARTMENT LIST OF EQUIPMENT IN EEM LAB
ELECTRICAL ENGINEERING DEPARTMENT LIST OF EQUIPMENT IN EEM LAB SL.NO. NAME OF THE INSTRUMENT SPECIFICATION 1. 3 Auto Transformer 415/415-470,15amp,15.P.3 2. 3 Resistive Load Box 1A 4,.5 2 3. Measurement
1. BASIC CONTROL SYSTEMS EQUIPMENT. 1.1) Open Loop System. Controlled Variable. Reference I/P (Command Signal) O/P. Actuator. Figure 1.
INTRODUCTION TO DIGIAC 1750 TRANSDUCERS & INSTRUMENTATION TRAINING SYSTEM The digiac 1750 (D1750) unit is a comprehensive transducer and instrumentation trainer with examples of a full range of input and
Experimental Validation of the Designed Topology
Chapter 7 Experimental Validation of the Designed Topology 7.1 Introduction The position of permanent magnet Stepper motor is measured without using sensors, [58-60] but till now no references are available
Thermoelectric Laws and Thermocouple Applications. Thermocouple: A junction of two dissimilar metals. Thermoelectric Laws
Thermoelectric Laws and Thermocouple Applications Thermocouple: A junction of two dissimilar metals If two junctions are at different temperatures, a voltage develops across the junction Charged carriers
USER MANUAL RHF SERIES
Hukseflux Thermal Sensors USER MANUAL RHF SERIES Ring heat flux sensors Copyright by Hukseflux manual v1824 www.hukseflux.com info@hukseflux.com Warning statements Follow the installation instructions
URM-00 TRAINING MODULE FOR INDUSTRIAL ELECTRIC MOTORS FOR MAIN DRIVE AND CONTROL CIRCUITS EDUCATIONAL KIT TO STUDY MOTORS CONTROL AND PROTECTION
URM-01/PP Stepper motor URM-02/CC DC motor (2-quadrant) URM-03/CA AC three-phase motor URM-04/BL Brushless motor URM-05/4Q DC motor (4-quadrant) URM-06/PS Speed and position DC motor URM-SMC Multifunzional
Strain gauges conditioner
Strain gauges conditioner Xpod Bridge conditioner extension module Strain gauge conditioner Xpod TM DATASHEET DATASHEET Introduction The applications are widely spread in petrochemicals (tank & pipe),
MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON
INCH-POUND 4 February 2004 SUPERSEDING MIL-M-38510/116 16 April 1980 MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS, ANALOG SWITCH WITH DRIVER, MONOLITHIC SILICON This specification is approved for
UNIT 8 OTHER SENSORS
UNIT 8 OTHER SENSORS Aim and Agenda of unit 8 The aim of the presentation Sensors measuring humidity and temperature The agenda of the presentation Accelerometer Types of accelerometers NTC temperature
Maxim Integrated Products 1
19-4002; Rev 2; 12/06 MAX6495 Evaluation Kit General Description The MAX6495 evaluation kit (EV kit) demonstrates a high-voltage overvoltage protection circuit for automotive applications that must survive
List of major equipment in Electrical Enginerring Department Labs
High Voltage Lab (84.10sq.m) 1 150 KV Power Transformer with accessories 2 550 KV Impulse generator with accessories 3 1-Ph. ¼ HP 1425 rpm Motor 4 Surge Potentiometer 400 pfd 550KV 5 Impulse Surge Oscilloscope
SSI Technologies Application Note PS-AN2 MediaSensor Absolute & Gage Pressure Transducers & Transmitters Product Overview
Product Description The MediaSensor (P51) family of bulk micro-machined, absolute, gage and sealed pressure transducers and transmitters are for both harsh and benign media with the superior typical accuracy
Faculty of Mechanical Engineering B.E. Mechanical Engineering (Sandwich) (R 2013) Semester III. Requirements for a batch of 30 students
Sl. No. Faculty of Mechanical Engineering (R 203) Semester III CE635 STRENGTH OF MATERIALS LABORATORY (R) (A) Deficiency (R - A). Universal Tensile Testing machine with double shear attachment 40 Ton Capacity
TRANSDUCERS. Conversion of Measured Strain or Output Voltage into Physical Quantity. Sensitivity Decrease due to Cable Extension
2-2 Strain gage transducers are designed to transduce physical variables such as load, force, pressure, acceleration, vibration, displacement and torque into electric signals by using strain gages as sensing
Connecting Different Sensors to your VR Controller. Todays Presenter: Aaron Offringa
Connecting Different Sensors to your VR Controller. Todays Presenter: Aaron Offringa Meet VR Connecting Different Sensors Each sensor/ transducer has its own purpose. The following are examples of different
UNIT I MECHATRONICS It field of study that implies the synergistic integration of electronic engineering, electrical engineering, control engineering and computer technology maintenance of a wide range
What is the secret to our success?
Australia s Quality Load Cell Manufacturer For over 20 years Delphi has been a reliable source of tension load measurement solutions... What is the secret to our success? TENSION CELLS Delphi Measurement
LT-2M LEAF TEMPERATURE SENSOR
USER MANUAL INSTALLATION AND OPERATION LT-2M LEAF TEMPERATURE SENSOR PHYTOMONITOR SERIES SECTION 1 - GENERAL INFORMATION Description The LT-2M sensor is designed for monitoring absolute temperature of
force/torque solutions by sensor type
force/torque solutions by sensor type Measurement Specialties is a pioneer in the design and manufacture of force/t precision sensors for electro-mechanical flight control applications, test and measurement
High-Dynamic-Range Power Sensors Models 2101 & 2103
USER S GUIDE High-Dynamic-Range Power Sensors Models 2101 & 2103 2584 Junction Ave. San Jose, CA 95134-1902 USA phone: (408) 919 1500 e-mail: contact@newfocus.com www.newfocus.com Warranty New Focus, Inc.
SENSORS FOR TEST AND MEASUREMENT
measurement S P E C I A L T I E S TM SENSORS FOR TEST AND MEASUREMENT PRESSURE POSITION VIBRATION TORQUE AND FORCE VIBRATION SENSORS DC Response (Static/Dynamic) Accelerometers To measure motion (velocity,
BAPI-Stat 4 Room Humidity Sensor (BA/ B4 -H200 Series)
Overview The BAPI-Stat 4 Style room unit is available as a humidity only sensor or as a combination temperature and humidity sensor with optional LCD display, temperature setpoint adjustment and occupant
Product Manual MNX10010 / REV B MODEL PS03
Product Manual MNX10010 / REV B MODEL PS03 3-Channel Power Supply Contents Section I Overview Introduction.... 2 Description... 2 Section II Installation Installation... 5 Section III Operation Operating
SL Series Application Notes. SL Series - Application Notes. General Application Notes. Wire Gage & Distance to Load
Transportation Products SL Series - Application Notes General Application Notes vin 2 ft. 14 AWG The SL family of power converters, designed as military grade standalone power converters, can also be used
FUNDAMENTALS OF PRESSURE & TEMPERATURE MEASUREMENT. Brian Cleary. Emerson Process Management
FUNDAMENTALS OF PRESSURE & TEMPERATURE MEASUREMENT Brian Cleary Emerson Process Management Why Measure Pressure & Temperature? Measurements of pressure and temperature are made for many reasons and by
2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
Mini-MAG Positioning Products
Mini-MAG Positioning Products Miniature Linear Stage The Mini-MAG (MMX) line of miniature linear stages blends the ultimate in performance, reliability, and value, delivering nearly twice the accuracy
Ohm s Law. 1-Introduction: General Physics Laboratory (PHY119) Basic Electrical Concepts:
Ohm s Law General Physics Laboratory (PHY119) 1-Introduction: Basic Electrical Concepts: 1- Current (I): Is the flow of electrons through a conductor or semiconductor. For current to flow, it requires
Electricity & Electronics 4: The Wheatstone Bridge
Electricity & Electronics 4: The Wheatstone ridge Wheatstone ridge IM In this unit we are going to consider a network of four resistors called a Wheatstone ridge. The principles involved have applications
Wind Turbine Emulation Experiment
Wind Turbine Emulation Experiment Aim: Study of static and dynamic characteristics of wind turbine (WT) by emulating the wind turbine behavior by means of a separately-excited DC motor using LabVIEW and
XA4202. The XA4202 is available in the 8-lead SO Package. Charging Docks Handheld Instruments Portable Computers.
Standalone Li-Lon Switch Mode Battery Charger Features Input Supply Range: 4.7V-6V High Efficiency Current Mode PWM Controller End - Charge - Current Detection Output Constant Switching Frequency for Minimum
Digital Multimeter: This handheld device is used by this course to measure voltage and resistance we will not use this to measure current or capacitan
Digital Multimeter: This handheld device is used by this course to measure voltage and resistance we will not use this to measure current or capacitance. For current you will use an analog ammeter and
Sensing Devices. Question Paper. Save My Exams! The Home of Revision. International A Level. Exam Board. Current of Electricity.
For more awesome GSE and level resources, visit us at www.savemyexams.co.uk/ Sensing evices Question Paper Level Subject Exam oard Topic Sub Topic Paper Type ooklet International Level Physics IE urrent
CONSONANCE CN3051A/CN3052A. 500mA USB-Compatible Lithium Ion Battery Charger. General Description: Features: Pin Assignment.
CONSONANCE 500mA USB-Compatible Lithium Ion Battery Charger CN3051A/CN3052A General Description: The CN3051A/CN3052A is a complete constant-current /constant voltage linear charger for single cell Li-ion
III EC6362 ELECTRONIC CIRCUITS AND DIGITAL LABORATORY
Sl No Faculty of Mechanical Engineering BE Robotics and Automation (R 2013) Semester III EC6362 ELECTRONIC CIRCUITS AND DIGITAL LABORATORY 1 0 30V RPS 12 2 0 50V RPS 2 3 0 5V RPS 2 4 0 30V Voltmeter 10
APPEFNDIX 1 SPECIFICATIONS OF THE TEST ENGINE
168 APPEFNDIX 1 SPECIFICATIONS OF THE TEST ENGINE Make and Model General details Number of cylinders Bore X Stroke Swept volume Clearance volume Rated output Compression ratio Rated speed Nozzle opening
Itech Portable Lithium Battery Safety Test Solutions
Itech Portable Lithium Battery Safety Test Solutions IT6400 Bipolar Dual-Channel DC Power Source, New Arrival Keywords: wearable devices, portable devices, handheld devices, mobile communications devices,
Vibration Fundamentals Training System Hands-On Turnkey System for Teaching Vibration Fundamentals
Vibration Fundamentals Training System Hands-On Turnkey System for Teaching Vibration Fundamentals www.haopute.com email:info@haopute.com phone:02884625157 mobile:18982185717 An Ideal Tool for Optimizing
to allow a current in one circuit to operate a switch in another circuit to protect a circuit by melting if the current becomes too large
1 What is the function of a relay? to allow a current in one circuit to operate a switch in another circuit to prevent an electric shock by earthing a metal case to protect a circuit by melting if the
Input/Output Devices. 2.1 Input Devices CHAPTER 2
CHPTER 2 Input/Output Devices This chapter is a brief consideration of typical input and output devices used with PLCs. The input devices considered include digital and analog devices such as mechanical
ISL80102, ISL80103 High Performance 2A and 3A LDOs Evaluation Board User Guide
ISL812, ISL813 High Performance 2A and LDOs Evaluation Board User Guide Description The ISL812 and ISL813 are high performance, low voltage, high current low dropout linear regulator specified at 2A and,
Tension and Compression Load Cell Model 8435
Technical Product Information w Tension and Compression Load Cell 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding and potential
FAIRCHILD T8001 SERIES STANDARD RANGE MINIATURE TWO-WIRE, P/I PRESSURE TRANSDUCER. Installation, Operation and Maintenance Instructions
FAIRCHILD T800 SERIES STANDARD RANGE MINIATURE TWO-WIRE, PI PRESSURE TRANSDUCER Installation, Operation and Maintenance Instructions Model TT800 Model TA800 Model TD800 Inlet Port (Channel 2) Inlet Port
ELOTRAIN. The Multimedia Plug-in Module System. 2 nd Edition
Lucas Nülle is proudly and exclusively represented in Australia and New Zealand by Training Systems Australia First in Vocational Training Equipment A Division of Pullman Learning Group 300 Centre Road,
Maxim Integrated Products 1
19-5287; Rev 0; 5/10 MAX9636 Evaluation Kit General Description The MAX9636 evaluation kit (EV kit) is an assembled and tested PCB used to evaluate the MAX9636 lowpower, low-noise, CMOS input op amp, which
CB50X & CB50X-DL load cells Influence factors in weighbridge application
CB50X & CB50X-DL load cells Influence factors in weighbridge application Introduction Vehicle scales can be considered as a platform that is supported by weight-sensing elements which produce an output
Electronics III Sensors
Electronics III Sensors Matthew Whitten Brookhaven College Sensor Defined. A device that responds to a stimulus, such as heat, light, or pressure, and generates a signal that can be measured or interpreted.
Load Cell for Manually Operated Presses Model 8451
w Technical Product Information Load Cell for Manually Operated Presses 1. Introduction... 2 2. Preparing for use... 2 2.1 Unpacking... 2 2.2 Using the instrument for the first time... 2 2.3 Grounding
DATUM ELECTRONICS RS425 NON-CONTACT TORQUE TRANSDUCER PRODUCT OVERVIEW
DATUM ELECTRONICS LIMITED TELEPHONE: +44 (0) 1983 28 28 34 FAX: +44 (0) 1983 28 28 35 EMAIL: support@datum-electronics.co.uk WEB: www.datum-electronics.co.uk DATUM ELECTRONICS RS425 NON-CONTACT TORQUE
APPARATUS AND MATERIAL REQUIRED Resistor, ammeter, (0-1.5A) voltmeter (0-5V ), battery, one way key, rheostat, sand paper, connecting wires.
ACTIVITIES ACTIVITY 1 AIM To assemble the components of a given electrical circuit. APPARATUS AND MATERIAL REQUIRED Resistor, ammeter, (0-1.5A) voltmeter (0-5V ), battery, one way key, rheostat, sand paper,
Wheel Torque Transducer WTT-D x
Wheel Torque Transducer WTT-D compact robust wireless Waterproof wheel torque transducer with telemetric signal transmission productive testing www.caema.de Advantages Driving in all weather conditions
VW Strain Gauge Spot Weld VWS-2020 Series
DATASHEET VW Strain Gauge Spot Weld VWS-2020 Series Designed primarily to measure strains on the surface of steel structures but may also be used on other types of material Overview APPLICATIONS Measurement
ELPRO Lepenik & Co. d.o.o., Ob gozdu 7c, Rogoza, 2204 Miklavž na Dravskem polju, Slovenija tel:
ph & Conductivity The following pages contain a variety of instruments for the measurement of ph values as well as conductivity in microsiemens. PHX 800 as a standard testing device for the ph values.
Electronics III Sensors
Electronics III Sensors Matthew Whitten Brookhaven College Sensor Defined. A device that responds to a stimulus, such as heat, light, or pressure, and generates a signal that can be measured or interpreted.
H2B-ACDC H3B-ACDC H5B-ACDC. 1 Channel Current Sensor 2 Channel Current Sensor. 3 Channel Current Sensor 5 Channel Current Sensor
The HXB-ACDC-XX fixed offset, fixed gain series Hall effect current sensor transducer board delivers output voltage proportional to the amount of current detected in the wire being measured. HB-ACDC H2B-ACDC
4.5 Dangers of Electricity
For more awesome GSE and level resources, visit us at www.savemyexams.co.uk/ 4.5 angers of Electricity Question Paper Level IGSE Subject Physics (0625) Exam oard Topic Sub Topic ooklet ambridge International
Electric Motor Test Systems Comprehensive Test Solutions for all kinds of Electric Motors
Crest Enhanced Quality Assurance Crest Test Systems Pvt. Ltd. Electric Motor Test Systems Comprehensive Test Solutions for all kinds of Electric Motors Electric Motor Test Systems Customisable for application
INSTRUCTION MANUAL BIPOLAR POWER SUPPLY PBA SERIES OPTIONAL RACK-MOUNTING ATTACHMENT OM-21E PRINTED IN JAPAN B
INSTRUCTION MANUAL BIPOLAR POWER SUPPLY PBA SERIES PBA20-12 PBA20-24 OPTIONAL RACK-MOUNTING ATTACHMENT OM-21E PRINTED IN JAPAN B68-0175-00 About Brands and Trademarks Our company and product names described
A22 / A6 MINIATURE FORCE SENSOR
1 A22 / A6 MINIATURE FORCE SENSOR MODEL A22 ; A6 COMPREHENSIVE ERROR % 0.1 OUTPUT SENSITIVITY mv/v 1.60 ± 0.16 NONLINEARITY %F.S 0.05 REPEATABILITY %F.S 0.05 HYSTERESIS %F.S 0.05 CREEP (5min)%F.S 0.1 ZERO
Power Management Solution With 196 HVC ENYCAP TM for Mini Charger and Fixed Voltage Supply Board
VISHAY BCCOMPONENTS www.vishay.com Aluminum Capacitors By Gerald Tatschl MAL29699003E3 96 HVC ENYCAP TM - MINI CHARGER AND BACKUP BOARD DESCRIPTION The MAL29699003E3 mini charger and backup demonstration
CT325 TEMPERATURE CONTROLLER INSTALLATION AND OPERATING INSTRUCTIONS
CT325 TEMPERATURE CONTROLLER INSTALLATION AND OPERATING INSTRUCTIONS Heat items with up to 240 watts DC only Up to 60 VDC Signals to display, on your voltmeter, the set point and actual temperatures in
IEC , 1 Ed. ( ) TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING
IEC YTEM FOR CONFIRMITY TETING AND COMMITTEE OF TETING LABORATORIE IEC 62368-1, 1 Ed. (2010-01) TETING AND MEAURING EQUIPMENT/ALLOWED UBCONTRACTING R = Required to be at Lab = May be subcontracted W =
EXPERIMENT 5 (a) PRESSURE, PROXIMITY AND MAGNETIC FIELD SENSORS
EXPERIMENT 5 (a) PRESSURE, PROXIMITY AND MAGNETIC FIELD SENSORS 1. OBJECTIVES: 1.1 To study the characteristics of a semiconductor type pressure sensor and an electronic pressure switch circuit 1.2 To
Solid State Pressure Sensor. STX Series Model 13A FEATURES DESCRIPTION
STXA-D_----EH-87 Solid State Pressure Sensor ANALOG OUTPUT STX Series Model A FEATURES Fastening Mount Calibrated Span and Offset Multi-order Temperature compensation./. or optional or Supply Customized
BAPI-Stat 3 Room Sensor
Overview and Identification The BAPI-Stat 3 is a multiple output transmitter for temperature and humidity with setpoint capability for both and occupied/unoccupied override switching. The large easy-to-read
Fluke 750P Series Pressure Modules
Fluke 750P Series Pressure Modules Technical Data Precision pressure measurement for 75X and 720 series calibrators The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential
Tex-1130-T, Ballasts of Lighting Assemblies
Contents: Section 1 Overview...2 Section 2 Apparatus...3 Section 3 Safety Note...4 Section 4 Consecutive Testing...5 Section 5 Preparation...6 Section 6 Testing Procedure...7 Section 7 Completing Lighting
Laboratory Accreditation Programmes
Laboratory Address 38J Angle Street, Onehunga, Auckland, 1061 Telephone 09 636-4999 URL Authorised Representative www.cps.co.nz Ms Kirsty Russell Laboratory Manager Client No. 927 Programme Accreditation
Our test laboratory - Apparatebau Kirchheim-Teck GmbH
1 / 16 Test laboratory equipment 1 Microsection lab for crimp contacts Tensile, pressure and bending test machine: Static + dynamic Vibration test: Vibration + shock Climate tests: Temperature + humidity
MGL Avionics EFIS G2 and iefis
MGL Avionics EFIS G2 and iefis Guide to using the MGL RDAC CAN interface with the LAD AERO Injection Kit on ROTAX 912-912S General... 3 Data connections... 3 LAD AERO ROTAX 912 engine data from ECU...
WHEATSTONE BRIDGE AMPLIFIER PDF
WHEATSTONE BRIDGE AMPLIFIER PDF ==> Download: WHEATSTONE BRIDGE AMPLIFIER PDF WHEATSTONE BRIDGE AMPLIFIER PDF - Are you searching for Wheatstone Bridge Amplifier Books? Now, you will be happy that at this
LOAD CELLS AND STRAIN SENSORS FOR PRESSWORKING APPLICATIONS
LOAD CELLS AND STRAIN SENSORS FOR PRESSWORKING APPLICATIONS Accurate high capacity load cells are needed for press tonnage monitor calibration. They are also useful for some types of press testing. Calibration
Simple Demonstration of the Seebeck Effect
Simple Demonstration of the Seebeck Effect Arman Molki The Petroleum Institute, Abu Dhabi, United Arab Emirates amolki@pi.ac.ae Abstract In this article we propose a simple and low-cost experimental set-up
HM8202. The HM8202 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers
Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V ~ 14V End-Charge-Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic
Chapter Assessment Use with Chapter 22.
Date Period 22 Use with Chapter 22. Current Electricity Understanding Concepts Part A Use each of the following terms once to complete the statements below. ampere electric current potential difference
The XA4203 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers
Standalone Li-Ion Switch Mode Battery Charger Features Input Supply Range: 9V-16V End - Charge - Current Detection Output Constant Switching Frequency for Minimum Noise Automatic Battery Recharge Automatic
ZT-1 Tonnage Load Module By Toledo Integrated Systems User s Manual
ZT-1 Tonnage Load Module By User s Manual 17617 ZT-1 Load Module User s Manual Revision: A ZT-1 User s Manual Installation THIS PAGE INTENTIONALLY LEFT BLANK DOC #17601 Page 2 ZT-1 User s Manual Installation
Engine Management and Data Acquisition Systems
Engine Management and Data Acquisition Systems In 2013 FuelTech celebrates ten years of innovative success and, although young, it has become a synonym of quality high performance. The company was created
Development of Dynamic Calibration Machine for Pressure Transducers
Journal of Physics: Conference Series PAPER OPEN ACCESS Development of Dynamic Calibration Machine for Pressure Transducers To cite this article: Yasin Durgut et al 2018 J. Phys.: Conf. Ser. 1065 162013
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Garber Metrology Weighing Solutions & Precision
Lynx Data Acquisition
Lynx Data Acquisition Simplicity and versatility in experimental data acquisition www.lynxtec.com.br Lynx Tecnologia Eletrônica Researchers, engineers and technicians needs to measure and test in their
AE3051 Experimental Fluid Dynamics TRANSIENT MEASUREMENTS IN A SHOCK TUBE
AE305 Experimental Fluid Dynamics TRANIENT EAUREENT IN A HOCK TUBE Objective In this set of experiments, piezoelectric transducers are used to measure pressures that change very rapidly with time. The
7.9.2 Potential Difference
7.9.2 Potential Difference 62 minutes 69 marks Page 1 of 20 Q1. A set of Christmas tree lights is made from twenty identical lamps connected in series. (a) Each lamp is designed to take a current of 0.25
ni.com Sensor Measurement Fundamentals Series
Sensor Measurement Fundamentals Series Load, Pressure, and Torque Measurements Key Takeaways Bridge-based measurement fundamentals Load, pressure, torque fundamentals Transducer Electronic Data Sheet (TEDS)
COMPUTER-BASED THERMAL EXPANSION APPARATUS
Instruction Manual and Experiment Guide for the PASCO scientific Model TD-8579 012-07599A 1/01 COMPUTER-BASED THERMAL EXPANSION APPARATUS 2000 PASCO scientific 012-07599A Computer-based Thermal Expansion
USING STANDARD x1 and x10 OSCILLOSCOPE PROBES WITH THE TEKTRONIX 222PS OSCILLOSCOPE:
USING STANDARD x1 and x10 OSCILLOSCOPE PROBES WITH THE TEKTRONIX 222PS OSCILLOSCOPE: & REPLACING the 222PS Battery Dr. H. Holden 2013. WARNING: The original Tektronix P850 and P400 probes(now hard to get)
Faraday's Law of Induction
Purpose Theory Faraday's Law of Induction a. To investigate the emf induced in a coil that is swinging through a magnetic field; b. To investigate the energy conversion from mechanical energy to electrical