FUEL & DIESEL INJECTION SERVICE

Transcription

1 FUEL INJECTION PRESSURE TESTERS FUEL & DIESEL INJECTION SERVICE Manufactured By LAN-TU469 Fuel Injection Pressure Tester with Schrader Adapters Enables testing on all cars with standard or small Schrader vavles $ OTC-6550PRO Pro Master Fuel Injection Kit Perform fuel pressure testing, diagnose weak fuel pumps or restricted filters, test for fuel flow and perform leak-down tests. Kit includes: PSI fuel pressure gauge 47 OTC fuel injection system adapters each with a quick connect Schrader valve Fuel Injection Service Application manual Replacement seal kit $ ATD-5650 Master Global Fuel Injection Pressure Test Kit Covers virtually all major domestic and foreign platforms 1988 to present (does not include CIS/TBI) The fuel line T accommodates $ /8", 1/4" and 5/16" hose sizes Kit contains: 16mm O-ring adapter and bolts (Hyundai & Mitsubishi) 11mm O-ring adapter and bolts (Nissan and Infiniti) M12 x 1.00 Honda pulse damper adapter (Accord, Civic, and S2000) SG Fuel Injection Pressure Tester Tests gasoline fuel pump pressure on most domestic and imported vehicles Tests all GM vehicles with multi-port and some TBI Tests all Chrysler cars with multi-port turbos and some TBI Tests all Ford vehicles with multi-port fuel injection systems and most Ford TBI systems equipped with or without small Schrader test valve PSI (0-7.0 BAR) and 0-50 PSI (0-3.5 BAR) gauges $ OTC-6550 Master Fuel Injection Kit Test fuel injection systems on most GMs, including GM TBI, Ford, Chrysler, and Jeep vehicles. Also works on imports, including CIS and CISE fuel systems. Includes PSI fuel pressure gauge and 35 popular OTC fuel injection adapters $ ATD-5578 Master Fuel Injection Pressure Test Set for All Systems Tests all fuel injection systems both foreign and domestic Includes late model GM, Chrysler and European applications Large 3-1/2" gauge with dual reading of PSI and KPA Low pressure 2-1/2" gauge for an accurate reading below 15 PSI $ Manufactured By OTC-4480 Basic Fuel Pressure Test Kit For domestic and import vehicles, plus GM TBI adapter PSI and 0-700kPa dual pressure gauge Performs running, residual, rail and flow-rate fuel pressure tests $ ATD-5567 Basic Fuel Injection Pressure Tester PSI and 0-7 BAR Tests the following systems: American Motors, Bosch AFC, MPC European and Japanese (except CIS) Chrysler; Ford; GM (except TBI) Japanese fuel injection systems and other Bendix-type fuel injection systems Schrader-type valve, including the small valve found on multi-port systems on Ford $ October 1 to December 31,

2 FUEL & DIESEL INJECTION SERVICE FUEL INJECTION CLEANERS FUEL INJECTION SERVICE TOOLS DIESEL LIGHT TRUCK LIS Injector Pressure Regulator Socket for Ford 6.0L and Other Diesel Engines $ LAN-TU470B Fuel Injection Canister Cleaner Check fuel pressure and set cleaning pressure at the same time Cleans intake valves, fuel passages and cylinders 20 oz. capacity bottle sits flat for filling $ Diesel Filter Wrenches for Davco For removing and replacing the main filter collar as well as the vent cap on Davco aftermarket diesel fuel filter systems Part # Wrench Size Price LIS " LIS " LIS " LIS Diesel Filter Wrench for 3.2L Ford Transit Engines Works on 2015 to current 150, 250, and 350 models $31.29 $35.41 $41.31 $ NEW OTC-7448A Fuel Injection Cleaner Canister Designed for direct fuel rail and injection cleaning 22 oz capacity 3-1/2" gauge 30,000 max. PSI $ FUEL SYSTEM MAINTENANCE IPA V Portable Diesel Fuel Injector Cleaner and Primer Cleans, flushes, primes and helps air-bleed fuel injection systems Performs fast, airless priming of a diesel pump while holding fuel delivery pressure Delivers clean fuel or fuel additive for injector cleaning Helps isolate fuel system problems Fills fuel filters without a mess For multiple fluid types except gasoline 5 gallon tank Includes 8 standard adapters, including Compucheck. All other adapaters available upon request. Battery not included MVC MV3 Gasoline Engine Detergent Case of 12 x 8 oz. bottles SLY Ford Power Stroke 6.7L Diesel Injector Socket $ $ FUEL PUMP TOOLS SLY BMW Injector Socket Set 14mm & 17mm sockets are designed to work in tight spaces and allow easy and accurate torqueing of the high pressure fuel lines Designed for BMWs with N54, N63 and S63 engines $ SLY BMW Injector Puller and Installer Tool $ $ LOC-940 Gas Tank Fuel Pump Retaining Ring Removal Tool Removes and re-installs plastic fuel pump retaining rings Universal design, fits most plastic retaining rings Prevents damage to original pump retaining ring Used with a 1/2" drive ratchet, not included SLY Duramax LLY, LBZ & LMM Injector Puller For use with GM vehicles produced from with an LLY, LBZ or LMM Duramax engine Pulls the injector straight out without rocking Pulls stuck injectors completely out Reduces the possibility of damaging the injector head $ JAN-30 FEB October to December 31, 2017

3 AIR, A/C, FUEL, OIL, RADIATOR & TRANSMISSION LINES DISCONNECT TOOLS CAL-689 Mercedes Fuel Line Pliers For quick connect and slide & lock couplers found on European and Domestic vehicles Applications include Audi, GM, Mercedes including M-Class, Toyota and VW Can also pull fuel & vacuum hoses on Mercedes LIS Disconnect Pliers for Fuel & EVAP Line Fittings Works great on Delphi two tab connectors and some import vehicles $ LIS AC/Fuel Line Disconnect Tool Set LIS /8" & 1/2" Transmission Oil Cooler Line Disconnect for Ford For 2003 and later Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS, Ford Super Duty Trucks, F250, F350 and F450 LIS Disconnect Set $ for Jiffy-Tite Connectors Disengages the line without removal of the clip Fits the most popular Jiffy-Tite fittings including: 3/8", 1/2", 5/8" 39% and 5/8" 30% LIS Air Line Disconnect Set Disconnects quick connect push-in connectors found on heavy-duty truck air systems and more Set comes with 5 popular sizes: 1/8"-5/32", 1/4", 3/8", 1/2" and 5/8" LIS Transmission Oil Cooler Line Scissors 3/8" x 1/2" $ $ GW-3321 Fuel Line Quick Disconnect Tool 5/16" x 3/8" NEW LIS Piece STC Fitting Release Tool Set Quickly and easily release STC fittings Includes sizes 6, 8 and 10 $ $ $ $ NEW $ LIS Heater Hose Disconnect Tool for Ford 2.0L For use on Ford Focus 2.0L and Ford Escape 2.0L Eco-Boost LIS Master Disconnect Tool Set for A/C and Fuel Lines LIS Master Plus Disconnect Set Includes the most popular disconnect tools Includes fuel line quick connect and spring lock couplings, A/C line couplings and transmission oil cooler connectors Disconnect Tools for Fuel and Oil Lines Part # Description Price ASM-8110 ASM-8021 ASM AST Piece Fuel and Transmission Line Disconnect Tool Set AST Piece Master Disconnect Kit For A/C, fuel, oil cooler, transmission and radiator lines $ $ Piece Disconnect Tool Set for Fuel and Oil Lines Applies to Nissan,Toyota, Tahoe, Suburban, Ford, GM 1/4", 5/16", 3/8", 1/2" sizes 3/8" Oil Cooler Line Remover For Ford trucks & SUVs. Fits Ford F150 1/2" Oil Cooler Line Remover Ford F Series Turbo-Diesel trucks 2009 Escape with 6F transmission, Ford Edge $ $ $ $ ATD Piece Deluxe Disconnect Tool Set For A/C, fuel, oil cooler, transmission and radiator lines 8110 $ $27.95 $32.95 October 1 to December 31,

4 TRANSMISSION / POWER STEERING / DIFFERENTIAL TRANSMISSION SERVICE 9CL Fluid Refilling System Kit with12.5l (3.3 Gallon) Tank Pneumatic or manual refilling Used for refilling ATF, gear oil, differentials and transfer cases Includes 10 adapters to connect to Audi/VW, BMW, Ford, Honda/Acura, Mercedes, Nissan, Toyota/Lexus and Volvo transmissions 5 foot universal hose with flow control and automatic shutoff valve Automatic Transmission Fluid Refill System Kits for the Majority of Automotive Applications Includes 10 adapters used to connect to Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes and Volvo transmissions 5 foot fluid dispensing hose with flow control and auto shutoff valves MIT-MV gallons (5 L) MIT-MV gallons (9.5 L) $ $ $ MV6410 SG Deluxe Pressure Tester for Automatic Transmission and Engine Oil For domestic and import vehicles PSI & 0-50 PSI gauges MVC B TransTech IV+ 2 in 1 Automatic Transmission Fluid Exchange System Combines both Inline and Dipstick capabilities within a single machine Uses: TT2K TransTech 2-Step Kit ( ) MVC TransTech (TT2K) Transmission System Service Kit Case of (6) 2-Step Service Kits $ $ ASM-ATFBASIC 8 Liter Basic Drive Line Filler System Used for filling fluids in transmission, differentials and transfer cases (not suitable for use with fuels or solvents). Includes ATF102 adapter applicable to BMW, Honda, Nissan & many other universal applications Ideal for Honda SUV differential fill $ SUN Piece 3/8" Drive Drain Plug & Pipe Plug Socket Set Male: 3/16" 3/8" Female: 1/4" 3/8" $ POWER STEERING SERVICE Filling Adapters for #ASM-ATFBASIC Part # Description Prix ASM-ATF17CVT Audi CVT Transmission 24 x 1.5 ASM-ATF16DSG VW/Audi DSG Transmission 24 x 1.5 ASM-ATF129 Mercedes Transmission 12 x 1.5 $59.95 $59.95 $59.95 TEX-212 Power Steering Fluid Vacuum Pump Bleeds air from power steering fluid system in less than 5 minutes Compatible with most makes and models of vehicles $ CTA Piece Automatic Transmission Fluid Filler Adapter Kit Works with #CTA-7400 ATF Filling Tank, plus other brands Includes the following adapters, also available individually: #7409: VW Passat/Tiguan #7410: Ford 1/8" NPT #7411: BMW, Honda, Nissan #7412: VW, Audi #7413: VW, Audi, Porsche #7414: VW, Audi, Mini 10 x 1.0 #7415: Mercedes #7416: VW, Audi DSG 24 x 1.5 #7417: VW, Audi CVT 22 x 1.5 #7418: Volvo 5/16 x 24 #7419: Toyota, Lexus 18 x 1.5 #7425: Infiniti 7 Speed #7426: Universal #7427: Mini Cooper #7428: Nissan Juke $ DIFFERENTIAL SERVICE MVC Diff-Vac 1000 Air Operated Differential and Multi Fluid Exchange System Extracts or exchanges differential, engine oil, transmission, power steering, coolant and transfer case fluids Two 5 gpm diaphragm pumps provide deep vacuum for extraction of high viscosity fluids under all temperature conditions JAN-30 FEB October to December 31, 2017

5 COOLING SYSTEM PRESSURE TESTERS & ADAPTERS COOLING SYSTEM SERVICE Radiator Adapters Part # Utilisation Price ASM-FZ32A ASM-FZ35A ASM-FZ36 ASM-FZ41 ASM-FZ47 ASM-FZ128 ASM-FZ138 Works with many domestic vehicles and some Mercedes and Nissan models Works with many different domestic vehicles Works with many different domestic vehicles Fits 2009 Audi A4, Q5 and Q and newer Audi and 1998 and newer Volkswagen models. Porsche Cayenne. Fits the 2012 Ford Focus Volvo S40 & V50 (new body style), and all Volvo (except XC 90) Land Rover LR2. Works with many different Asian/Domestic vehicles Works with many different Asian/Domestic vehicles ASM-BMW345 Works with BMW, except the new 3 (E90), 5 (E60), and 6 (E63 and E64) series. Land Rover Range Rover , Discovery ASM-BMW350 Works with BMW 3 Series (E90), and 6 Series (E60, E63, E64) and X (E70) ASM-M0349 Works with Mercedes models with a threaded filler neck (except M-Class, 163 body) & ML 350 (new 164 body) 2006 $46.95 $66.95 $47.95 $66.95 $66.95 $69.95 $69.95 $76.95 $64.95 $72.95 MIT-MV4508 Universal Radiator Adapter For cars, vans, light and heavy duty trucks Compatible with Stant-style cooling system pressure pumps MIT-MV4560 Cooling System Pressure Test Kit Includes: Unique hand pressure pump 2 dual-function cap test adapters to quickly reveal external cooling system leaks and detect internal leaks 4 adapters to test the cooling system and caps of most domestic and Asian cars and light trucks, as well as some European vehicles (Jaguar S-type and Land Rover Freelander and LR3) MIT-MV4534 Universal Cooling System Test Kit For cars, vans, light and heavy duty trucks Includes #MV4509 Universal Radiator Adapter $ $ $ ATD-3300 Universal Cooling System Pressure Test Kit High quality hand pump with color coded 0-35 PSI gauge 12 adapters to fit most popular domestic and import cars and trucks $ ATD Piece Cooling System Pressure Test Adapter Update Kit Easily test entire cooling system, including radiator, heater core and radiator cap For use with #ATD-3300 Includes 8 radiator adapters and 2 radiator cap test adapters to fit most popular domestic and import cars and light trucks Applications: GM, Ford, Jeep, BMW, Mazda, Mercedes, Toyota, Volvo, VW and more Radiator Pressure Tester Adapter Kits Tests automotive pressurized cooling systems up to 30 PSI All metal construction CTA Piece Euro Kit CTA Piece Domestic/Asian Kit $ $ $ $ STA Universal Cooling System and Pressure Cap Tester Tests pressure up to 30 lbs Includes blow molded case October 1 to December 31,

6 COOLING SYSTEM SERVICE COOLING SYSTEM PRESSURE TESTERS & ADAPTERS COOLING SYSTEM REFILLERS WAY Heavy Duty Cooling System Test and Adapter Kit Truck coverage: Freightliner, Volvo, International, GMC, Kenworth, Sterling, Peterbilt, Mack One piece all aluminum adapters Uses shop air to maintain constant system pressure Includes: 5 Heavy Duty truck adapters: #2, #12, #13, #14, #15 A spindle adapter Pressure test regulator 5 ft. pressure release hose $ UV Airlift Cooling System Refiller Eliminate airlocks in vehicle cooling systems and refills in seconds OEM approved worldwide Refills the entire cooling system including the heater core Check for leaks while under vacuum $ CL Piece Cooling System Pressure Tester with Pump For use on modern domestic and imported cars and light trucks Includes 19 test caps and adapters $ UV Airlift II Cooling System Refiller Refills the entire cooling system including the heater core Eliminate time consuming bleeding and purging Check for leaks while under vacuum No extra adapters needed No need to connect/disconnect hoses $ AST Radiator Pressure Tester and Vacuum Type Cooling System Kit Allows easy testing for leakage in radiator and quick change of coolant Unit suitable for domestic and import vehicles Special design of vacuum purge and refill tool connection fits near ly all types of radiator openings $ UV HD Airlift Kit for Heavy Duty Vehicles Removes airlocks in HD cooling systems of trucks and buses Creates a vacuum in the coolant system, refilling the entire system in seconds, including the heater core, EGR coolers, intercoolers and aftercoolers Eliminates the time consuming process of refilling and bleeding cooling systems Checks for leaks while under vacuum Versatile cone adapter fits most systems OEM approved by International Truck $ $ PBT-70888A Complete Cooling System & Cap Test Kit Universal bladder for 100% coverage for domestic and import vehicles Cap adapter kit has 8 sizes to adapt to all radiator caps ATD-3306 Cooling System Vacuum Purge & Refill Kit Refills entire cooling system quickly Eliminates need for bleeding and purging system to eliminate air pockets Includes: Vacuum purge and refill tool Universal radiator adapter for use on most cars and light trucks Coolant hoses $ JAN-30 FEB October to December 31, 2017

7 COOLING SYSTEM SERVICE COOLING SYSTEM REFILLERS MIT-MV4535 Cooling System AirEvac Kit Refills automotive cooling systems in minutes without trapping air that can cause overheating The kit combines a universal adapter with a compressed-air-operated venturi vacuum to quickly eliminate trapped air by purging and refilling the cooling system under vacuum $ LIS Spill-Free Funnel Set for the Cooling System Eliminates trapped air pockets Includes caps, threaded caps and adapters for use on newer GM threaded style radiator openings, Ford surge tanks, and most domestic and import cars and light trucks CTA-7088 Cooling System Refilling Kit with Universal Adapter For refilling coolant and air bleeding Includes 4 adapters to fit most American, Japanese and Korean cars 45 elbow for angled radiators $ $ CL Cooling System Vacuum Purge & Refiller Kit Coolant is easily refilled by creating a vacuum in the radiator Eliminates airlocks during refilling. No need for air bleeding. Checks for leaks and refills in seconds 9CL Piece Anti-Spill Coolant Refilling Funnel Set For refilling coolant and air bleeding Transparent funnel chamber helps display air bubbles while air bleeding Includes adapters for domestic and imported vehicles COOLANT EXCHANGER $ UV X Vacufill Coolant Exchanger with Waste Pump Features an auxiliary pump for emptying the waste coolant reservoir Connects easily to all engine cooling systems Tests for leaks while under vacuum Refills the entire system in seconds while eliminating airlocks Large 3 gallon new-coolant fill tank Large 12 gallon waste-coolant reservoir with pump for easy disposal of old coolant $ ANTI-FREEZE & COOLANT TESTERS $ $ EZ-SP102 Anti-Freeze Tester $7. 39 ATD-1105 Deluxe Antifreeze and Coolant Tester Works with all ethylene glycol coolants, including GM Dex-Cool $9. 87 ATD-1106 Professional Antifreeze and Coolant Tester Disc-type tester is accurate at all tempertures Works with all ethylene glycol coolants, including GM Dex-Cool $ TEX-106 Cold-Chek Professional Anti-Freeze Tester Accurate at all temperatures Tests ethylene glycol-based coolant, hot or cold, including Dex-Cool Celsius and Fahrenheit scales CEN-3R101 Coolant & Battery Refractometer Measure freezing point of propylene or ethelyne glycol based cooling systems Range: 32 F to -60 F (0 F to -50 C) October 1 to December 31,

8 COOLING SYSTEM SERVICE COMBUSTION LEAK DETECTORS UV Combustion Leak Tester Fast economical and accurate method to test for combustion gas leaks from: Head Gaskets, Cylinder Heads, Engine Blocks Works on gasoline and diesel engines $ LIS Combustion Leak Detector Fluid changes from blue to yellow when exposed to combustion gases from the radiator $ UV Replacement Tester Fluid for #UV (16oz) $ FAN CLUTCH WRENCHES & PULLEY HOLDERS AST Piece Fan Clutch Wrench Set Works on a wide range of Ford, GM and Chrysler vehicles $ CL Universal Adjustable Pulley Holding Set Universal design fits many different pulleys with slots or holes, such as fan clutch, idle, camshaft and crakshaft pulleys Wrench adjustable from 25mm-100mm Interchangeable step pins: 7, 10, 14, 16mm Applicable to: BMW, Ford, Honda, Mercedes, Nissan, Subaru, Toyota/Lexus, VW/Audi, Volvo $ AST Mercedes-Benz & BMW Fan Clutch Service Set For the removal of lock nuts on thermo-viscous fans found on Mercedes-Benz, BMW, Ford and many other vehicles $ LIS Piece Pneumatic Fan Clutch Wrench Set to Remove & Install Fits Ford, GM and Chrysler Includes 36mm, 1-1/2", 1-9/16", 41mm, 42mm, 1-7/8" and 2" $ LIS Universal Fan Clutch Wrench Set For use on most popular applications Hooked wrench will hold bolted on water pump pulleys Double-sided spanner style wrench will hold pressed on pulleys on many GM, Jeep and Dodge vehicles Double-ended turning wrench with 36mm and 47mm/1-7/8" openings and 1/2" square drive holes for use with a hand ratchet or a breaker bar $ JAN-30 FEB October to December 31, 2017

9 FAN CLUTCH WRENCHES & PULLEY HOLDERS COOLING SYSTEM SERVICE SLY-99800A GM & Chrysler Gas Engine Fan Clutch Wrench SLY GM Fan Clutch Wrench For use on 1996 and later GM SUV s, trucks and vans Works with all water pumps that have bolts holding the pulley on the pump $ $ LAN in 1 Fan Clutch Wrench 22, 32, 36, 40, 48, 50mm sizes Can be used with a breaker bar $ SLY mm Audi, BMW & VW Fan Clutch Wrench Works in conjunction with #SLY for the following applications: Audi s 1996 & later (except pressed on pulleys) BMW 3, 5, 6, 7, 8, X & Z series VW s 1998 and later (except pressed on pulleys) Works with #SLY on the following applications with pressed on water pump pullies: Audi A L, S L, A L, Allroad L VW Passat L $ GW Piece 6.0L Fan Clutch Pulley Holder Designed for fan clutch removal on 2003 and above Ford 6.0-L Powerstroke engines Fan clutch wrench grips and securely holds the pulley housing Fan clutch holding tool to loosen and remove oval or round hole holding nut $ SERVICE TOOLS & ACCESSORIES LIS Heater Core Hose Backflush Tool Fits 1/2", 5/8" and 3/4" hose fittings Attaches to a standard garden hose $ TEX-356 Heater Core Hose Backflush Tool Fits 1/2", 5/8" and 3/4" heater hoses Uses a standard garden hose for water Cleans cooling systems and heater cores without disassembly $ LIS Thermostat Gasket Cleaner $ LIS Gallon Spill-Proof Anti-Freeze Drain Pan $ CAL-751 GM Thermostat Wrench 13mm, 12 point wrench with special bends specifically designed to work on GM 3.1 and 3.4 liter V6 engines Allows user to remove and install the thermostat housing in a fraction of the time it currently takes by making the bottom housing bolt more accessible without removing other parts $ October 1 to December 31,

10 FRONT-END & SUSPENSION STRUT & SPRING SERVICE TOOLS & COMPRESSORS OTC-6637-ST StrutTamer II Extreme with Stand Capable of safely compressing the largest strut springs Locking jaws clamp onto and compress springs even tighter than before Extra thick 5/8" compression arms for superior strength, stability and safety Locking trunions for optimal stability during spring compression Arm-locking rings eliminate the need for tools to adjust $ $ BRN-7600 Strut Spring Compressor Can handle the heaviest coil-over-shocks, the Ford F-150 and even the Toyota RAV-4 without need for additional adaptors Handles long, short, narrow or angled springs Opened-up front design for easier access and longer handles for extra torque Optional mobile cart or benchmount accessories CTA /8" Drive VW/Audi Strut Nut Socket Special oval-shaped bit end measures 5.5mm x 8.2mm Services suspension strut housing nuts found on some VW & Audi models. Also fits some BMW, Seat, Renault, Peugeot and other European makes. $ LIS Universal Strut Spring Compressor Fits all strut spring sizes of domestic and import vehicles CTA-4038 Rebound Spring Strut Service Kit Holds the piston in the extended position while replacing the internal rebound spring shock absorber Applications include BMW, Ford, Fiat, Mercedes, Nissan, Toyota $ $ TGR Heavy Duty Strut Compressor Removes and installs the spring-over steering stabilizer found on most self-steering axles Built-in measuring device enables accurate installation 15" 25" center-to-center working range $ $ ATD-7550 Master Spring Compressor Set Set includes: ATD-7585 Master MacPherson Strut Tool: Designed to compress most sizes of MacPherson strut springs ATD-7549 Coil Spring Compressor: Fits most American and some imported cars and light trucks Does not work on AMC and Ford with upper coil spring. $ CL Rear Coil Spring Compressor (On-Car Application) Works on vehicles with wishbone suspensions with lower hole diameter bigger than 30mm Easy access to the rear coil spring compressor without removing the lower control arm Small size spindle suitable for on-car operation Telescopic tool ranges from 95 to 220mm Can be operated with an impact wrench with a 100 Nm torque extension bar For BMW 3 Series, Audi A4 & A6, Chrysler, Chevrolet, Ford, Honda, Hyundai, Mazda, Mercedes, Mitsubishi, Suzuki, Toyota ATD-7585 Master MacPherson Strut Tool Designed to compress most sizes of MacPherson strut springs Allows quick compression of the coil spring to replace the shock absorber or spring set Also allows for repairs on bent struts, strut tubes and damaged pieces ATD-7549 Coil Spring Compressor Fits most American and some imported cars and light trucks. Does not work on AMC and Ford with upper coil spring. $ $ CL MacPherson Strut Coil Spring Compressor For use with an impact wrench Yellow covers protect the lacquered springs from being damaged Suitable for Audi, Acura,Mercedes, BMW, Ford, Honda, Mitsubishi, Nissan, Porsche, Subaru, Toyota, VW, Volvo, etc... Recommended ON-CARapplication for Mercedes 4WDfront suspensions $ $ SUN-3903 MacPherson Strut Coil Spring Tool Ideal for removal and installation of auto and light truck coil springs Use on or off vehicle JAN-30 FEB October to December 31, 2017

11 FRONT-END & SUSPENSION CAMBER ADJUSTMENT TOOLS JDI-TC614 Air-Assisted Multiple Camber Adjustment Tool Works on many GM and Chrysler vehicles Inflatable air bladder fits between tire and strut for easy and controlled adjustment of camber settings Camber can be easily set with wheels on the ground Eliminates the need for special camber bolts Includes: 2 ft. air hose and bladder Low pressure pop-off valve to prevent overinflating Air control valve for inflating and controlled deflating $ $ SG Strut Alignment Level $ OTC-6530 Ball Joint Super Set Combines OTC #7249, #7918 and #7996 ball joint sets into one SUPER set Covers: many GM, Ford thru 2003, Dodge light trucks thru 1998, Dodge vans, Durango & Dakota thru 2003, Honda Accord, Civic, Del Sol, & Prelude thru 2001 Includes application cross reference and instructions BALL JOINT SERVICE FREE! #OTC-6299 (Pickle Fork Separator Set) with purchase of #OTC FREE! #OTC-7175 (3 Piece Indexing Pry Bar Set) with purchase of #OTC $ OTC-6529 Car Ball Joint Master Service Kit Everything required is laid out in this 50+ piece set Comprehensive manual includes diagrams with instructions for use of the adapters Covers vehicles thru 2008 OTC-7249 Ball Joint Service Set Contains 3 receiver tubes: 2-3/4" I.D. x 3" O.D., 2-1/4" I.D. x 2-1/2" O.D., and 1-3/4" I.D. x 2" O.D. $ OTC-6539 Truck/Van/SUV Ball Joint Master Service Kit Everything required is laid out in this 55+ piece set Comprehensive manual includes diagrams with instructions for use of the adapters Covers: Toyota, Hyundai, KIA, Infinity, Isuzu, Nissan, Chrysler, Dodge, Jeep, Plymouth, Mitsubishi, Ford, Lincoln, Mercury, Mazda, Chevrolet, Buick, Oldsmobile, Pontiac, Cadillac, GMC, Hummer Covers vehicles thru 2008 OTC-6559 Car/Truck/Van/SUV Ball Joint Master Service Kit Everyting needed for servicing ball joints including 70+ adapters, C-frame and application guide Ball joint application guide contains application charts and diagrams with step-by-step instructions Covers vehicles thru 2008 $ $ Ball Joint Adapter Kits for Cars Vehicle application chart and diagrams included Does not include the OTC-7248 C-Frame press Part # Description Price OTC OTC OTC OTC Piece Set for Ford/Mazda Piece Set for GM Piece Set for Honda/Acura Piece Set for Asian/Import $ $ $ $ October 1 to December 31,

12 FRONT-END & SUSPENSION BALL JOINT SERVICE MUK Ball Joint Separator Kit 3 fork sizes: 24mm, 27mm, 31mm Jaw capacity: 30mm 65mm Center screw allows continuous adjustment within the jaw capacity range Great for use on Audi/VW (A3, A4, A6) BMW, Mercedes-Benz No damage to aluminum parts and rubber hoses $ SLY-68600A Honda/Acura Ball Joint Remover/Installer Tool Removes and installs lower ball joints on the car versus removing steering knuckle and using a shop press Works on Honda/Acura and many other makes of automobiles Used with an air hammer $ AST-7865 Ball Joint Service Tool with 4-Wheel Drive Adapters For removal and installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins. $ /4" Drive Ball Joint Sockets Part # Size Application Price SUN /64" Chrysler mid-size, rear-wheel drive cars SUN /64" Chrysle/Dodge light trucks & vans $29.43 $29.43 AST-7897 Ball Joint Service Tool and Master Adapter Set Works on upper and lower ball joints on most GM, Ford and Dodge 2 and 4 wheel drive pickups. $ /4" Drive Ball Joint Sockets Part # Size Price SK /8" SK /8" $60.85 $62.95 SUSPENSION SERVICE TOOLS MUK Suspension Wear Indicator Allows for the inspection of moving parts in the lower suspension of a vehicle on any surface Provides a safe and effective replacement for an assortment of pry bars, cheater pipes, wedges and other tools that are commonly used in an attempt to identify worn suspension parts Strut bushings and bearings, link pin bushings, wheel bearings, CV axles, ball joints, tie-rod ends, steering rack mounts, torsion bar bushings and control arm bushings all can be checked for wear, play or looseness with this tool It allows the user to positively see, feel or hear a problem while performing suspension diagnostics $ $ KINGPIN SERVICE TGR Heavy Duty King Pin Press Removes king pins in minutes Generates 46,000 lbs of force For use on straight and tapered king pins from 7/8" to 2-5/32" Isuzu NPR and GMC/Chevrolet W-series trucks require a custom adaptor (# ) Not compatible with FL981 axles Ship weight: 30 lbs JAN-30 FEB October to December 31, 2017

13 FRONT-END & SUSPENSION AXLE / SPINDLE SERVICE 6 and 12 Point Axle Nut Impact Sockets Part # Drive Description Points SAE/Metric Range Price SUN /2" 4 Piece 6 Metric SUN /2" SUN /2" SUN /2" 7 Piece For GM & Chrysler 4 Piece For use on most vehicles 8 Piece For use on most vehicles Metric 12 Metric 12 Metric 30mm 36mm DEEP 29mm 38mm DEEP 30mm 36mm DEEP 29mm 38mm DEEP $69.95 $ $79.95 $ /2" Drive 6 Point DEEP Axle Nut Impact Sockets Part # Size Price SUN mm $17.95 SUN mm $17.95 SUN mm $22.95 SUN mm $22.95 SUN mm $34.95 SUN mm $21.95 SUN mm $ /2" Drive 12 Point DEEP Axle Nut Impact Sockets Part # Size Price SUN-2801ZD 29mm $27.95 SUN-2800ZD 30mm $27.95 SUN-2804ZD 32mm $29.95 SUN-2806ZD 34mm $30.95 SUN-2803ZD 35mm $27.95 SUN-2802ZD 36mm $34.95 SUN-2805ZD 38mm $32.95 SUN-2807ZD 39mm $ and 12 Point Axle Nut Sockets Part # Drive Size Points Price LIS /2" 30mm 12 LIS /2" 39mm 12 $21.95 $25.37 $ ASM-6500X18 Rear Axle Bolt Remover/ Installer Socket 1/2" drive, 18mm, 12 point Applicable to 2006 VW Jetta & Golf $ ASM-6506 Axle Nut Socket Set for VW/Audi Covers mm and 17mm Allen 18, 24, 30 and 32mm,12 point sockets GRY-1708SN 8 Piece 1/2" Drive 12 Point Axle/Spindle Nut Socket Set 29mm, 30mm, 32mm, 34mm, 35mm, 36mm, 38mm, 39mm $ ASM-M17WLS Mercedes Lug Nut Socket 17mm flower shaped 1.9" long Applicable to: Maybach and Mercedes 221 S-class and late model CL-class $ SLY Toyota/Lexus Front Axle Lock Nut Remover Kit 30mm, 12 point 1/2" drive impact socket with special depth Lock nut release tool to unlock the 30mm axle nut on both front and rear wheel drive vehicles Also works on other vehicles with 30mm axle lock crush nuts $ CL Piece Axle Spindle Rethreading Set Designed for rethreading damaged or rusted threads on axle spindles Sizes: M20 x 1.25 M20 x 1.50 M22 x 1.00 M22 x 1.50 M24 x 1.50 M24 x /4" x 20UNEF 13/16" x 20UNEF $ October 1 to December 31,

14 FRONT-END & SUSPENSION CV (CONSTANT VELOCITY) SERVICE MADE IN GERMANY For an amazing video demonstration and to learn more about this product, visit: FLX-FB5000 CV Boot Installer Installs CV boots in less than 20 minutes The CV boot installer is utilized by placing a universal CV Flexx Boot over the installer s retractable aluminum arms. Then, using compressed air, the boot is spread open wide enough to be passed over the axle shaft, without having to remove the axle. Includes a storage case $ KNI i " CV Boot Clamp Pliers with Front and Side Jaws For simple and reliable clamping of 1-ear and 2-ear clamps For clamps on CV boots, coolant and fuel lines, air pressure systems, compressors LIS Offset Boot Clamp Pliers Crimps ear-type clamps in hard to reach areas, except those requiring a torque reading Unique offset design works on clamps on larger size boots $ $ Universal Flexx Boots Part # Description Price FLX-FB2001 For ATVs and very small cars Axles 16mm-19mm FLX-FB3000 For mid-size cars Axles 20mm-24mm FLX-FB3001 For car, 4x4 and truck applications Axles >27mm FLX-FB3002 For Toyota-style large shaft applications. No cut-off on boot. FLX-FB4000 Rack and pinion boot for 100% of automotive applications $21.95 $21.95 $28.95 $24.95 $26.95 LIS CV Boot Clamp Pliers For all ear-type clamps including GM FWD outboard CV joints $ $ FLX-FB Piece Universal Gomex Clamps for CV Boot Applications and Radiator Hoses Includes 25 large and 25 small clamps $ STK Axle Popper Pops axle shaft loose from engine Insert fork between transaxle case and half shaft. Strike the end of the fork to release the shaft. Included shim fills larger gap found on some vehicles Safer and surer than a pry bar WHEEL HUB PULLERS MUK Universal Axle Shaft Pusher/Hub Puller For use with an impact wrench (not included): the vibration impact of the pneumatic wrench is transmitted to the wheel hub and to the axle shaft through the spindle Suitable for almost all 4- and 5-hole wheel hubs with a pitch circle diameter of up to 136mm Pushes out bonded or heavily corroded axle shafts Can also be used in conjuction with the # slide hammer and # /14 adapter with UN 1-1/2" thread, or any other slide hammer with the appropriate thread, for extracting wheel hubs $ QPL-1190 Universal Bolt-On Axle Shaft Puller 15 lbs slide hammer MADE IN CANADA $ $ OTC-6290A Front Hub Puller for 4WD Vehicles Services most 1/2, 3/4 and 1 Ton GM trucks and SUV s Dodge Ram Ford Cherokee $ OTC Ton Capacity Universal Hub Puller HD with Plate Fits on wheel hubs with 5"-8"+ bolt circles and popular 5 bolt hubs with 4"-5" bolt circles $ OTC-7208A Front Hub Puller $ ATD-3057 Flange-Type Axle and Front Wheel Hub Puller For use on domestic and import cars and light trucks Range: 3-3/4" to 4-1/2" For use on four, five, or six bolt stud design and all non-c lock GM axles JAN-30 FEB October to December 31, 2017

15 FRONT-END & SUSPENSION TIE ROD SERVICE TOOLS 1/2" Drive Tie Rod Impact Sockets $ TGR Tie Rod End Remover Set Set includes: 7/8" heavy duty trucks (#10301) 3/4" intermediate size trucks (#10302) 20mm European trucks (#10304) LIS Piece Thick Pickle Fork Set 20% thicker design provides extra lifting capacity Includes 11/16", 15/16", 1-1/8", 1-7/16", 1-5/8" forks $ Part # Description Price SK /2" x 15/16" U-shape opening SK /16" x 3/4" U-shape opening MAY Universal Inner Tie Rod Tool Works on 99% of inner tie rod models, most every length and diameter Grips securely on round, hexagonal and octagonal tie rods. No need for adapters Working diameter range: 35mm to 45mm / 1-3/8" to 1-3/4" LIS Large Inner Tie Rod Tool Set 1-7/16", 33.6mm, 38.4mm, 40mm crow foot for GM, and 42mm to fit many Toyota, Nissan, Ford, Lincoln, Mercury and Chevrolet truck and SUV applications. Also fits some Cadillac Escalade, Hummer H2, Honda Passport and Jeep Liberty applications. LIS Piece Inner Tie Rod Tool Set 1-1/4", 1-1/2", 1-3/16", 1-5/16", 1-7/16" and 33.6mm LIS Master Inner Tie Rod Tool Set 29mm, 1-3/16", 1-1/4", 32.5mm, 1-5/16", 33.6mm, 1-3/8", 1-7/16", 1-1/2" $ $ LIS Stepped Pickle Fork Kit Stepped design helps keep tool from bouncing back For separating ball joints, tie rods, Pitman arms and other uses Includes 1-1/8", 15/16", 11/16" forks, pneumatic driver and handle $73.45 $52.45 $ $ $ OTC Piece Pickle Fork Separator Set 11" x 1-1/8", 11-3/4" x 1-5/8", 11-5/8" x 1-7/16", 16" x 11/16", 16" x 15/16" MAY Piece Pneumatic Separating Pickle Fork Set.401 shank For separating ball joints and tie rods quickly and easily Sizes: 11/16" (17mm); 15/16" (23mm); 1-1/8" (29mm); 1-3/8" (35mm); 1-5/8" (42mm) $ ATD Piece Ball Joint & Tie Rod Separator Set 3 sizes: 11/16", 15/16" & 1-1/8" 1 handle for use with manual hammer 1 handle for use with air hammer $ ATD Piece Front End Service Tool Set For servicing most Pitman arms, ball joints and tie rods. $ $ LIS Pickle Fork Kit For separating ball joints, tie rods, Pitman arms and other uses Includes 1-1/8", 15/16", 11/16" forks, pneumatic driver and handle AST-7802 Tie Rod/Pitman Arm Adjusting Tool Set $ $ October 1 to December 31,

16 FRONT-END & SUSPENSION TIE ROD SERVICE TOOLS MUK /2" Drive Excentric Turn Chuck Special tool for turning and fixing the tie rod or ball joints Unilateral opening allows universal usage for easy ball joint replacement or wheel alignment $ $ OTC-7503 Outer Tie Rod Remover OTC-7314A Pitman Arm Puller $ $ SLY Large Pitman Arm Remover For removing large Pitman arms on 3/4 to 1 ton pickup trucks Applications: Ford F250/350, Dodge 2500/3500, Chevrolet/GMC 2500/3500 CAL-946 Inner Tie Rod Removal Tool $ $ STK Tie Rod End Pliers This unique design with a socket end and pointed spindle end allows easy wheel pivoting for vehicle steering by temporarily reconnecting ball and socket tie rod ends. PBT Steering Rack End Wrench For servicing all inner tie rod ends Suits multiple rack ends and sizes Round with two drive flats Round with no drive flats Hex drive Cam design increases force as load is applied Use on vehicles with limited access to avoid the need to remove the rack assembly $ STABILIZER BAR SERVICE LOWER CONTROL ARM SERVICE 9CL " Long Sway Bar Link Pliers with Sawteeth Holds and easily removes sway bar link Strongly grips and works on rusted nuts, pipes and other objects $ QPL-1199 Lower Control Arm Triple Action Tool For C-V axle and strut repair One man operation, fast and safe Makes strut replacement easy Removes ball joints without damage Re-installs lower control arm $ QPL-1198 Stabilizer Bar Link (Linkit) Wear Indicator $ JAN-30 FEB October to December 31, 2017

17 WHEEL & TIRE SERVICE $ EZ-EZLINE EZLINE Laser Wheel Alignment Tool For heavy trucks and all types of trailers Fast, precise axle & wheel alignment Simple 2 step instructions Multipurpose measurement capabilities Includes: 4 magnetic self-centering lasers 32 ft./10m measuring tape 2 magnetic 5th wheel pin adapters WHEEL ALIGNMENT EZ-EZLINEB1SW EZLINE Laser Multi-Alignment Tool (Complete Package Including Software) This complete package is a more advanced alignment system for truck trailers Includes: EZLINE laser wheel alignment tool 2 universal bars and 2 hub adaptors Software and carrying case LIS Caster Camber Kit for GM Kit includes: 14-1/2" 21mm caster wrench which is used from bottom side of vehicle to move hard-to-reach and often rusted OEM cams on 2007 & newer GM vehicles with coil spring front suspensions Cam adjusting holding tool which adjusts the upper control arm cams found on Chevy and GMC vehicles NEW $ SFS Deluxe Auto & Light Truck Tire Repair Tool Kit $ SFS Deluxe Truck Tire Repair Tool Kit $ Insertion Tools and Probes TIRE REPAIR TOOLS Part # Application Price SFS Insertion tool for auto & light truck SFS Insertion tool for trucks SFS Insertion tool for heavy equipment SFS Probe spiral for auto & light truck SFS Probe spiral for heavy equipment ATD Piece Tire Repair Tool Kit Repair any size tubeless tires without demounting tires. (40) tire repair plugs (ATD-86301) (1) tire repair lubricant (ATD-86302) (1) T-handle spiral probe reamer (1) T-handle insert (2) 3mm Hex wrenches AST-7445 Tire Repair Tool Kit Set Includes: (1) Heavy duty steel T-handle insert tool (1) Heavy duty steel T-handle spiral probe reamer (2) 3mm Allen wrenches (40) 4" Tire repair plugs (1) Tire repair lubricant $ $ $26.95 $27.95 $79.95 $27.95 $29.95 This Catalog is Available Electronically in a Flip Book Format. Use the Search Icon to find a part number or enter a key word! Please visit our website: Click on the Catalog tab, then select the Online Version. October 1 to December 31,

18 WHEEL & TIRE SERVICE LOCKNUT SOCKETS & ACCESSORIES 1/2" Square Drive Locknut Sockets Part # Description Price OTC-7090A Ford F-series H.D. 3/4-and 1-ton 4WD trucks; GM 3/4- and 1-ton 4WD trucks. $51.03 OTC newer Ford Ranger Bronco II and Explorer with manual hubs; Ford F-series 1/2-ton truck and full-size Bronco with manual hubs; 1995 newer Ford F-series 3/4-ton and 1-ton trucks with manual hubs; Ford F-series 1/2- and 3/4-ton trucks and full-size Bronco; GM 1/2-ton truck and full-size Blazer/Jimmy; Dodge 1/2-ton truck with manual hubs; International 1/2-ton truck /2-ton, 1995 Ford F-series H.D. 3/4- and 1-ton Dana 50 IFS of OTC-7158 Dana 60 front axle; GM H.D. 3/4- and 1-ton trucks, 1994 newer Dodge Dana 60 with Cummins. OTC newer Ford F-series 3/4- and 1-ton trucks with Dana 80 rear axle Ford Ranger and Bronco II with manual hubs; OTC-7270A Ford F-series 1/2-ton truck; full-size Bronco with Dana 44 front axle; Dodge trucks with Dana 44 automatic hubs. 3/4" Drive Truck Wheel Bearing Locknut Sockets 6 Point 3/4" Drive Truck Wheel Bearing Locknut Sockets 8 Point $51.03 $51.03 $62.24 $51.03 $ LIS /2" Drive Locknut Socket for GM Removes and installs the hub bearing retaining nut found on some GM GMT900 platform trucks The socket has 9 pins to fit the new style retaining nut found on 2-wheel and 4-wheel drive Cheyenne, Silverado, Escalade, Sierra and Avalanche trucks with 10.5" or 11.5" ring gear CAL Piece 4WD Locknut Socket Set 1/2" square drive Covers the most common light truck and SUV applications Includes: 4-lug socket 6-lug socket Toyota - 4-lug lock nut socket Ford - 4-lug lock nut socket 4WD front spindle puller $ Part # Opening Size Price OTC /32" OTC /4" OTC /8" OTC /2" OTC /16" OTC /8" OTC /4" OTC /8" OTC " OTC /8" OTC /4" OTC /2" OTC /4" OTC /8" OTC " OTC /8" OTC /8" OTC /8" OTC /4" $31.61 $30.60 $33.66 $30.60 $29.56 $29.56 $30.60 $30.60 $31.61 $33.66 $30.60 $29.56 $33.66 $34.69 $32.65 $31.61 $52.04 $49.99 $56.13 Part # Opening Size Price OTC /8" OTC /16" OTC /4" OTC /8" OTC " OTC /8" OTC /4" OTC /8" OTC /2" OTC /4" OTC /16" OTC /8" OTC /8" OTC /8" OTC /2" OTC /16" OTC /8" $31.61 $31.61 $33.66 $33.66 $31.61 $33.66 $28.56 $30.60 $31.61 $32.65 $33.66 $33.66 $49.99 $45.91 $49.99 $64.29 $49.99 LIS Truck and Trailer Wheel Pan Catches oil from wheel hubs after removing cap Will not warp if oil is warm Fits rims with 13-3/4" ID and larger OTC Piece 6 and 8 Point Truck Wheel Bearing Locknut Sockets with Tool Board OTC /2" 6 pt. OTC /16" 6 pt. OTC /16" 6 pt., rounded OTC /8" 6 pt. OTC /4" 6 pt. OTC /8" 6 pt. OTC /4" 6 pt. OTC /4" 8 pt. OTC /2" 6 pt. OTC /8" 8 pt. OTC " 6 pt. OTC /8" 6 pt. $ OTC Piece 6 Point Truck Wheel Bearing Locknut Sockets with Tool Board OTC /32" OTC /4" OTC /8" OTC /8" rounded OTC /2" OTC /16" OTC /16" rounded OTC /8" OTC /4" OTC /8" OTC " OTC /8" OTC /4" OTC /2" OTC /4" OTC /8" OTC " OTC /8" OTC /8" OTC /8" OTC /4" OTC-5047 Truck Wheel Lug Nut Cap Removal Pliers $ $ $ JAN-30 FEB October to December 31, 2017

19 WHEEL & TIRE SERVICE WHEEL STUD SERVICE TOOLS TIT Stud Extractor Fits 1/4" to 1/2" (6-12mm) studs Impact gun compatible Ideal for removing stripped, rusted, broken or smooth studs Hex drive can be a driver with a wrench, ratchet, or impact tool $ LIS Wheel Stud Pilot Pin Set Removes and installs wheels on many European vehicles with lug bolts Includes: 12mm x mm x mm x 1.5 $ GW-1708DD Stud Extractor Removes studs from 1/4" to 3/4" LIS Wheel Stud Installer Easily installs new wheel studs on most all automotive and light duty truck wheels, foreign and domestic 4 Piece Stud Remover $ $ Piece Wheel Stud Alignment Guide Tool for European Vehicles 9CL MM x 1.5 (Male) 9CL MM x 1.5 (Male) $ $ CL Wheel Stud Alignment Guides for Mini Cooper & BMW M14 x 1.25 Mini Cooper 2007 and up BMW: X5; X5, X6; , X5, X6; X5 X6; , 535, 550, 740, 750, B7, X5, X6; , 335, 528, 535, 550, 740, 750, B7, M5, X5, X6; 2014 and up - 640, 650, X3 $ Part # Description 3/8" Drive 1/2" Drive Price OTC-6986 Fractional 5/16" & 1/4" studs 3/8" & 7/16" studs OTC-6987 Metric 6mm & 8mm studs 10mm & 12mm studs $77.58 $ CL Piece Mercedes-Benz Wheel Bolt Socket and Wheel Hanger Set M14 x P1.5 Specially designed for removing wheel bolt on Mercedes-Benz CL, GL, GLK, ML, S-Series vehicles 2007 and up $ Stud Remover and Installer Kits 203 Part # Description Size Range Price ASM Piece Metric Set 6mm, 8mm, 10mm, 12mm ASM Piece SAE Set 1/4", 5/16", 7/16", 3/8", 1/2" ASM Piece SAE Set 1/4", 5/16", 7/16", 3/8", 1/2", 9/16", 5/8" $78.95 $99.95 $ Piece Wheel Stud Pilot Pins For Audi, BMW, Mini Cooper, VW, Mercedes, Porsche, and other vehicles with bolt style lugs. Part # Description Price TEX MM X 1.25 TEX MM X 1.5 TEX MM X 1.5 $39.67 $39.67 $39.67 LAN-802 Wheel Stud Installers and Rethreaders Set Correctly installs wheel studs on major vehicle platforms, domestic and foreign, including light trucks and SUV s Includes installers and rethreader dies in sizes: 1/2-20, M12x1.25, M12x1.5, M14x1.5 and M14x2.0 $ NEW ESC Thread Restorer Set for Heavy Duty Truck Studs 3/4" - 16 right 3/4" - 16 left 22mm $ October 1 to December 31,

20 WHEEL & TIRE SERVICE WHEEL NUT SERVICE TOOLS MUK /2" Drive Extra Long Thin Wall Wheel Mounting Socket Set 6" extra long sockets 17mm, 19mm, 21mm Not to be used with an impact wrench $ AST Piece 1/2" Drive Double Ended Damaged Wheel Lock and Lug Nut Removel Twist Socket Set 3/4" (19mm) x 13/16" (21mm) 7/8" (22mm) x 15/16" (24mm) $ AST-7404 Flank Bite Damaged Lug Nut Socket Set with Spinning Protective Sleeves Includes: 17mm, 19mm (3/4"), 21mm (13/16"), 22mm Protective sleeve stays in place while socket spins Safe for forward tightening of lug nuts without damage SUN Piece 1/2" Drive Thin Wall SAE & Metric Wheel Protector Deep Impact Socket Set 6 SAE sockets: 3/4" to 1-1/16" 3 metric sockets: 17mm to 21mm STE Piece Locking Lug Nut Master Key Set Specifically designed to remove locking lug nuts on nearly every aftermarket wheels Provides technician with keys when customer doesn t have them $ $ $ SK Piece 1/2" Drive Lug Nut and Wheel Lock Removal TurboSocket Flip Socket Set 3/4" (19mm) x 13/16" (21mm) 7/8" (22mm) x 15/16" (24mm) SUN Piece 1/2" Drive Lug Nut and Wheel Lock Removal Impact Socket Set Removes most lug nuts and wheel locks on most domestic and import cars and light trucks LOC-4200A 1/2" Drive Dual Sided Twist Socket Lug Nut Remover Fits 3/4", 19mm, 13/16", and 21mm lug nuts LOC-4000 Deluxe Hubcap and Wheel Lock Removal Kit Includes LTI #4200A dual sided twist socket lug nut remover $ $ $ $ ATD Piece Locking Lug Nut Master Key Set Specifically designed to remove locking lug nuts on nearly every aftermarket wheels $ CTA-A154 4 Piece 1/2" Drive Lug Nut Removal Impact Socket Set 3/4", 13/16", 1", 1-1/8" Works on lug nuts with missing keys $ FREE! #AME (Digital Tire Inflator) with purchase of #AME AME Nut Buddy Wheel Nut Loosener and Remover Loosen the most stubborn wheel nuts and remove them with the extendion handle For use on commercial or agricultural wheels 58:1 gear ratio Rated output torque: 2950 ft-lbs Includes 1-5/16" (33mm) & 1-1/2" (38mm) sockets $ JAN-30 FEB October to December 31, 2017

21 WHEEL & TIRE SERVICE $ AME Heavy Duty Wheel Weight Pliers for Cars Removes, trims and installs all types of wheel weights WHEEL WEIGHT TOOLS HUB & STUD RESURFACING TOOLS MUK Inner Rim Cleaner For the optimal cleaning of the inner wheel contact surface. To be used only on the inner side of an aluminum rim. Optimized for the latest wheel rims with an enlarged diameter of 75mm (2.9") $ LIS Wheel Weight Tool Removes, trims and installs clip-on wheel weights Also includes lever and offset flat tip for removing wheel covers $ GW-3358 Wheel Weight Tool Removes, trims and installs clip-on wheel weights Plastic-type material on the hammer head for safe, mar-free installation of specially coated wheel weights used on alloy wheels $ Wheel Hub Grinder Part # Description Price MUK M 6-3/8" Wheel Hub Grinder Disc 1 holder MUK /8" Spare Discs, Pack of 3 MUK Point Type 2 Wheel Hub Grinder for Wheels with Studs (1) 8 point Type 2 grinder (5) 8 point 1.5" spare discs (5) 8 point 2" spare discs MUK Point Type 4 Hub Grinder for Trucks (1) 8 point Type 4 grinder (5) 8 point 56mm (2.2") spare discs (5) 8 point 56mm (2.2") rough spare discs $ $57.95 $ M $ $ ESC Goat All-in-One Wheel Weight Tool Install, remove, reshape and trim all wheel weights with one tool Will not damage or scratch the rim or wheel OTC-8342 Brake Hub Resurfacing Kit Fits your power drill to quickly sand rust off lug studs and rotors on the hub assembly. For most domestic and import vehicles with either front or rear disc brakes. Includes holder and five sanding discs. Run at speeds of 10,000 rpm or less for best results. $ VALVE & TPMS SERVICE TOOLS LIS Tire Deflator Set for TPMS Valve Stems Quickly evacuates air from tires without removing the valve core LIS " Long Valve Core Tool For removing and installing standard valve cores $ MUK Valve Core Tool with Valve Core Holder For removing and installing valve cores The tool will retain the core once removed One handed operation $ $ Wheel Stud Cleaners Cleans dirty, rusted studs for quick removal and easier lug nut installation Extends the stud life Maximum 2500 RPM Part # Description Price CP M20 X 37L $52.95 CP M22 X 37L $52.95 CP M24 X 37L $52.95 CP M30 X 60L $ M-7547 Scotch-Brite Roloc Brake Hub Cleaning Disc Kit Contains 3M Brake Hub Cleaning Disc Holder and (5) Scotch-Brite Roloc Brake Hub Cleaning Discs 3M-7546 Scotch-Brite Roloc Brake Hub Cleaning Disc Extra coarse 1-1/2" x 5/8" $ $35. 3M M Screw-On Type Brake Hub Cleaning Disc Holder 1-1/2" x 5/8" $ October 1 to December 31,

22 WHEEL & TIRE SERVICE HUB & STUD RESURFACING TOOLS AME Hub Buddy Lug/Hub Surface Cleaner Impact rated Removes rust, corrosion and other build-up from wheel stud, drums and tire rim Includes Hub Buddy attachement and (1) 2" cleaning disc $ $ AME Replacement 2" Cleaning Discs for Hub Buddy TIRE IRONS & BEAD TOOLS Tire Spoons 3/4" diameter Part # Description Price OTC-5716 OTC-5720 OTC-5724 OTC OTC OTC OTC OTC OTC HD Hammer Action Sliding Tire Spoon Extends from 38" to 52" 35" Hammer Action Sliding Dual Tire Spoon Mount and demount heads Extending Tire Spoon Extends from 22" to 34" 35" Curved End and Flat Tip Curved End Tire Spoon 24" Curved Tire Spoon 30" Curved Tire Spoon 30" Flat Tip Curved Tire Spoon 24" Curved Shank Tire Spoon The curved shank allows improved access for the spoon head around the tire bead or wheel rim 30" Curved Shank Tire Spoon The curved shank allows improved access for the spoon head around the tire bead or wheel rim $ $ $ $96.96 $56.13 $61.24 $61.24 $56.13 $61.24 Tire & Wheel Service Tools Part # Description Price KEN " Straight Spoon Tire Iron - 11/16" Stock KEN " Swan Neck Leverage Bar - 7/8" Stock KEN " Bead Breaker Bar - 7/8" Stock KEN " General Purpose Tubeless Tire Iron - 3/4" Stock KEN " Heavy Duty Tubeless Tire Iron - 1" Stock KEN " Fiberglass Handle Bead Breaking Wedge KEN " Fiberglass Handle Bead Breaking Wedge KEN " Wood Handle Duck-Billed Bead Breaking Wedge KEN " Wood Handle Duck-Billed Bead Breaking Wedge $47.95 $89.99 $89.99 $99.95 $ $ $ $ $ Tire Service Hammers with Indestructible Handles Ergonomic rubber grip handles reinforced with steel bars OTC-5789ID520 Head Weight: 5 lbs Handle Length: 20" OTC-5789ID1032 Head Weight: 10 lbs Handle Length: 32" $ $ OTC-5732 Tire Spoon Holding Pliers This tool is the 3rd hand needed to ease mounting and demounting of tires with tire spoons $ $ OTC-5733 Tire Bead Wedge Pliers Keeps the tire in the bead drop area to ease mounting and demounting of larger truck tires STE Low Profile Tire Removal Tool Easily removes low profile tires Extra long length 30 angled design $ JAN-30 FEB October to December 31, 2017

23 WHEEL & TIRE SERVICE TIRE IRONS & BEAD TOOLS ESC Universal Impact-Driven Tire Demounter Works as a hand-held tire machine Can be used on all tires from 10" and up For use with agricultural tires, one-piece grader, loader, forestry and back hoe tires $ $ ESC KIT Tire Demount & Mount Tool Kit Demount tool: Removes both top and bottom bead from short side. No need to flip tire/rim. Demount all tubeless tires 17.5" to 24.5", and Super Singles up to 315/22.5" Also works on most radial and bias ply tires Mounting tool: Mounts all tubeless tires 17.5" to 24.5" ESC Heavy Duty Slide Hammer/ Bead Breaker This design prevents slide hammer kick back ESC Tuffbar Protective Bead Lifting Tool Stop damaging expensive aluminum rims Use with existing rim clamp tire changers 23-3/4" x 1.2" x 0.5" $ $ ESC Ton Bead Breaker Tool Kit Works on single, two- and three-piece truck tires/rims Includes: 5 quart air/hydraulic pump 8 ft. hose assembly with coupler $ ESC Manual Bead Breaker Loosens tire bead from the rim with leverage Excellent for working on the tire without removing the wheel Will handle 38" and 42" 14-ply farm tractor and backhoe tires with drop center rims to small ATV and lawnmower tires Operates with air ratchet wrench or ratchet & socket DO NOT USE AIR IMPACT TOOL $ AME Golden Buddy Tire Changing System Mount and demount tool assembly for 22.5" and 24.5" tires/wheels Bead keeper Heavy duty steel construction Nylon rollers protect the tire bead $ #AME (Digital Tire Inflator) with purchase of #AME FREE! TIRE INFLATION CAGES ON ALL MODELS EXCEPT: #36001, #36007, #36014 Tire Inflation Cages Mandatory for any shop working with tubeless and multi-piece rims Part # Model Description / Application Bars Height (to the inside bend of the cage) Width Base Height (overall) Weight (lbs) KEN T103 Passenger & Light Truck Cage 3 30" 16" 21.5" x 22" 40.5" 80 KEN T101 Portable Cage for Standard Truck Tires 2 41" 16" 7" x 21.5" (closed) 51.5" 60 KEN T101A Portable Cage for Wide Base Truck Tires " 20.5" 7" x 27" (closed) 56.5" 72 KEN T102 Truck and Off-Road Tire Cage " 20.5" 31.5" x 26" 56.5" 146 KEN T105 Truck and Off-Road Tire Cage " 20.5" 41" x 26" 56.5" 182 KEN T106 Truck and Off-Road Tire Cage " 20.5" 26" x 22" 56.5" 134 KEN T108 Truck and Off-Road Tire Cage 7 46" 29" 34" x 56" 63" 485 KEN T104 Tall Cage for Off-The-Road & Farm Tires 3 65" 24" 30" x 27" 77.5" 158 KEN T111 Earthmover & Agricultural Tire Cage " 42" 72" x 48" 90.5" 820 KEN T112 Earthmover & Agricultural Tire Cage 12 87" 48" 60" x 80" 99.5" 1200 Price $ $ $ $ KEN EZ Tire Rotator Quickly rotates assembly inside cage for easy valve access Fits 3-bar, 4-bar and 5-bar inflation cages $ October 1 to December 31,

24 WHEEL & TIRE SERVICE NEW TIRE SPREADERS AIR TANKS $ $ ESC Ton Heavy Duty OTR (Off-The-Road) Tire Spreader Tire spreader range: 6" to 34" Ideal for inspection and repairs on truck/farm and OTR tires Can be used with both air/hydraulic foot pump or manual hydraulic pump Bead Bazooka Tommy Gun Bead Seater New 2" MIS valve helps inflate even the most stubborn tires Redesigned grips for comfortable operation and better control Completely serviceable 3 year warranty GAI-BB6LM 6 Liter Tank GAI-BB9LM 9 Liter Tank $ $ BEAD SEATERS BB9LM BB6LM NEW ESC-90456S OTR Safety Lockout Bar For use in conjunction with #ESC Assists in maintaining the separation between the tire, while releasing the hydraulic pressure from the spreader. Extension: 6" - 34" Easy locking pin for placement Portable Air Tanks Up to 125 psi compressed air Reserve air tank for cleaning and inflating Air line shut-off valve with pressure relief valve and pressure gauge Heavy-gauge steel construction, rust-free finish Part # Description Dimensions Price ATD Gallon 17.9" x 11.4" x 15.3" ATD Gallon 22.8" x 13" x 15.3" LIS Tire & Tube Test Tank Handles passenger tire sizes to wide oval and light duty truck tires 31" x 12" x 12" TEST TANKS $ TREAD GAUGES $ $ $ TSI-CH5 5 Gallon Cheetah Bead Seater Makes seating the most difficult bead safe, simple, fast and economical ASME certified tank designed for commercial use on all tires ATV to 24.5" truck tires $ CEN-3S401 Electronic Digital Tire Tread Depth Gauge Metric and SAE readout Range is 1" / 25mm Graduated in.001" /.01mm / 1/64" ATD Gallon Bead Seater Seats beads on all tires from 4" to 24.5" sizes ASME-certified powder coated steel tank Built-in carrying handle for portability $ SG Tire Tread Depth Gauge Measures the remaining tread on a tire in inches and millimeters: 0 to 1" in 1/32" increments and 0 to 25mm in 1mm increments $5. 64 MADE IN USA ESC Gallon Cyclone X-Series Bead Seater ASME rated steel tank Quick release valve for fast and easy air release Dimensions: 21" x 10" Weight: 26 lbs $ FREE! #ESC (Manual Bead Breaker) with purchase of #ESC FOW Tire Tread Gauge Range: 1"/25mm Resolution:.0005"/.01mm/1/64ths Spring loaded Hold measurement 2.1" base.95" diameter rod $ JAN-30 FEB October to December 31, 2017

25 WHEEL & TIRE SERVICE INFLATORS & GAUGES STE Bluetooth Tire Gauge with Tread Depth Indicator Measures tire pressure $ (PSI, kpsi, Bar): PSI Tread depth: 0-20mm, 0-25/32" Uses your smart device (Phone, Tablet, PC) in conjunction with the free App to assess overall tire health App shows Make/Model/Year selection, recommended & measured tire pressure and tread depth. Can also scan VIN number. $ MIC-1991 Original Michelin 3.5" Dial-Type Gauge with Rubber Protection 5 ft. hose 0.7 to12 Bar & 10 to 174 PSI Max. air pressure: 15 Bar 90 days warranty from date of purchase AST in-1 Tire Pressure and Tread Depth Gauge with Hose Pressure range: 0-80 PSI Tread depth: 0-13/32" in 1/32" and mm increments Holds tire pressure reading on dial face until cleared Stainless steel braided hose Shock proof design Meets ANSI standards for pressure accuracy LEG-HGH2FZ Flexzilla Truck Tire Inflator Kit 3/8" x 50 ft. Flexzilla air hose Glad-hand attachment 30 Dual air chuck $ $ AST /8" Dial Tire Inflator 21" hose Inflate/deflate lever Measuring range: PSI Units: PSI/BAR AST " Digital Tire Inflator 21" hose Inflate/deflate lever Works with TPMS Works on a nitrogen system Measuring range: PSI Lithium battery lifetime: 140 hours 1 button operation, auto shut-off $ $ PCL-DAC1A08 Accura 1 Digital Tire Inflator 6 ft. hose and single lock-on chuck 1.4 to 174 PSI Reading accuracy: ±1 PSI Reading: PSI Professional Entry Level Digital Tire Inflator Gauge Inflation range: 5 to 170 PSI Accuracy: ± 1 PSI up to 60 PSI, ± 2 PSI from 60 to 145 PSI ± 3 PSI over 145 PSI Resolution: 0.1 PSI Reading: PSI, BAR, kpa PCL-AFG1H08 AirForce Dial Gauge Tire Inflator 6 ft. hose and single lock-on chuck psi and 0-12 Bar Reading accuracy: ±2 PSI AME Digital Tire Inflator Inflate, deflate, measure tire pressure 6 ft. hose with clip-on single straight chuck PSI, 12 Bar Reading accuracy: ± 2 PSI Reading: PSI, Bar, kpa, kgf Includes (2) AAA batteries $ PCL-DTi08 6 Ft. Hose $ PCL-DTi081 21" Hose $ $ $ $ SG Tire Inflator with Dial Gauge PSI and kpa scales 6" dual head chuck Protective rubber boot surrounds dial gage Corrosion resistant brass pressure relief valve 13" long hose with 360 swivel 1/4" female NPT inlet SG Truck Tire Inflator with Easy to Read Dial Gauge Extra long 14" dual head chuck 13" long hose with 360 swivel Calibration: PSI and kpa 1/4" Female NPT inlet Protective rubber boot surrounds dial SG Tire Inflator with Gauge Nylon pop up gauge measures from 10 to 120 PSI in 2 PSI increments Dual head chuck on 12" hose 1/4" NPT Female air inlet $ SG Tire Inflator with Gauge Measures from 10 to 120 PSI in 2 lb. increments Inflates tire, reads pressure, releases air Magnifying window lens 360 swivel between 15" air hose and 6" dual head chuck 1/4" NPT Female air inlet $ $ October 1 to December 31,

26 BRAKE SERVICE BRAKE SERVICE MEASURING TOOLS CEN-3B630 Digital Drum Gauge Check trailer drums without removing the wheel Range: " (0-425mm) Graduations:.005" (.01mm) Arm depth: 3.75" CEN-3M335 Wheels On Rotor Gauge Measures rotor without removing the wheel Range: 0" " (0-88mm) Graduations: 0.001" (0.01mm) $ $ FOW Electronic Rotor Gauge with Twin Conical Anvils Direct inch/metric/fractional conversion 3.5" jaw depth Range: 0-5.5"/140mm Resolution:.0005"/.01mm/1/64ths Conical anvils measure scored surfaces on both sides of the rotor $ CEN-6459A Digital Disc Brake Gauge Pointed anvils measure scored and unscored surfaces Built-in depth rod to check brake pad and shoe wear Range: " (0-58mm) $ FOW Electronic Rotor Gauge Measures most rotors while the wheels are still mounted on the vehicle Reads inch, metric and fraction Range: "/0-82.5mm Resolution:.0005"/.01mm/1/64ths Dust, water and oil resistant $ ATD-8658 Electronic Inch/Metric Brake Drum Gauge Pointed anvils and 4.25" long arms to inspect drums before turning or replacing them Range: 6" to 20.65" (150mm to 515mm) Graduations: 0.005" ATD-8660A Electronic Inch/Metric Rotor Gauge Depth rod for measuring pad wear Pointed anvils and 3.5" long arms to inspect rotors before turning or replacing them Range: 0 to 4" (0 to 100mm) Graduations: 0.001" $ FOW Electronic Rotor Gauge Direct inch/metric/fractional conversion 6" jaw depth Range: 0-5.5"/140mm Resolution:.0005"/.01mm/1/64ths $ $ $ FOW EZ-Drum Electronic Brake Drum Gauge Direct inch/metric/fractional conversion Range: 4"-20"/ mm Resolution:.0005"/.01mm Extra-long jaws with depth marking and threaded holes for depth stop locations at 1" and 1.5" 4" preset without the need for a master for internal measurements Zero setting and reversible contact points for external measurements Hold function $ OTC-6596 Brake Pad Measurement Gauge Quick color reference or accurate millimeter measurement of remaining brake pad Unique design allows for measurement on the vehicle without the removal of wheel assembly or brake caliper A minimum gap of 3.5mm is needed between brake caliper and pad for tool to be inserted $ Setting Master FOW Wheels On EZ-Drum Reach Electronic Brake Drum Gauge Inch/Metric/Fraction conversion Range: 4"-20"/ mm (internal measurments) Resolution: "/0.01mm/1/64ths increments Accuracy: 0.005"/0.13mm The included 4" setting master and 4" drum preset (101.6mm) ensures accurate internal measurements STE Piece Manual Brake Pad/Shoe Gauge Shows customer an accurate measure of brake lining $ JAN-30 FEB October to December 31, 2017

27 BRAKE SERVICE BRAKE BLEEDING MIT-MV8500 Silverline Elite Automotive Test Kit Dual capability hand pump Provides either vacuum or pressure Performs engine performance diagnostics, automatic transmission service, brake bleeding, fluid transfer, evacuation, sampling, windshield repair and more Includes components needed to perform numerous diagnostic and mechanical tests $ BLEEDING/ DIAGNOSTICS GW Gallon Capacity Brake Bleeder Tank For use with DOT 2, 3, 4 and 5 brake fluids only $ $ MIT-MV6840 Pressure Brake Bleeding System (7) master cylinder adapters to connect to most American, Asian and European cars and light trucks 1.2 gallon fluid reservoir Integrated manual pump, pressure gauge and pressure relief valve 5 ft. fluid dispensing hose with flow control and auto-shut-off valves TEX-803X Universal Master Cylinder Bleeder Kit Includes long-lasting aluminum adapters for US and metric fittings $ MIT-MV6830 Economy Compressed Air Brake Bleed Kit Powerful vacuum capable of bleeding up to 1.9 liters per minute Automatic shutoff to prevent overfill Includes: evacuation wand, brake bleed hose, hanging hook, three bleed screw adapters and three master cylinder refill plates $ FREE! #MIT-MVA6832 (Brake Fluid Auto-Refill Kit) with purchase of #MIT-MV6830. CTA-7300 Brake Master Cylinder Adapter Kit Applications: Domestic, Asian & European vehicles Includes a quick coupler adapter to connect to other brands of bleeding tanks $ MIT-MV6870 Vacuum Brake & Hydraulic Clutch Bleeder 1.2 liter capacity reservoir Automatic shutoff prevents overfill Integrated hanging hook/hose wrap 4 ft. long bleed hose Universal bleed screw adapter conforms to most common bleed screw sizes Includes two replacement bleed screw adapters $ PWP-BAKIT01 Global Brake Bleeder Adapter Set For Domestic, European and Asian vehicles $ TIT Liter Vacuum Brake Fluid Bleeder Universal rubber fitting holds securely on brake bleed screw Locking trigger and hanging hook $ CTA Liter Pressure Brake Bleeder Creates pressure to push brake fluid through the system 3 liter capacity tank with pressure release valve 0-70 PSI gauge 39" hose $ Brake Bleeder Wrenches Part # Description Price LIS mm & 9mm LIS mm & 10mm VIM-B457 Brake Bleeder Wrench 8mm x 10mm Hex $11.95 $11.95 $ October 1 to December 31,

28 BRAKE SERVICE BRAKE FLUID TESTERS BRAKE SERVICE TOOLS $ OTC-4598DOT4 Brake Fluid Tester Tester determines the quality of the brake fluid Includes 1.5V AAA battery LOC-993 Brake Line / Brake Cylinder Fitting Rethreading Kit Rethread damaged male and female brake fittings Dual-sided male/female sockets Works directly on vehicle where standard tap and die won t fit Includes SAE & metric sizes: 3/8" 24, 7/16" 24, 1/2" 20, 5/8" 18, 10mm 1.0, 12mm 1.0 BRAKE SERVICE TOOLS $ LIS Combination Disc Brake Kit Helps make installing new pads on front and rear brakes quick and easy Designed to work on single piston disc brakes that require the piston to be rotated back into the caliper as well as pistons that are pushed Includes (2) double-sided two-pin adapters and a pinless pushing adapter $ LIS Disk Brake Pad Spreader For installing pads on most domestic and import cars and light trucks Pneumatic Brake Pin & Bushing Driver Kit Part # Shank Length Price AJX-A /4" AJX-A /4" $ $ $ LIS Speedy Brake Pad Spreader Compresses brake pistons in seconds to make brake pad replacement an easy job. Brake Caliper Files with Scraper on the Face End for Removal of Coarse Residues MUK MUK For Domestic and For Japanese European Cars Cars $ OTC Ton Capacity Brake Drum and Rotor Puller Handles large components such as brake drums, rotors, drive wheels, gears, flywheels, and pulleys Spread to 12-3/4" and 5" of reach Can be used with air tools LAN-279 Brake Caliper Press Works on various single, dual and quad piston calipers Centrally distributes force to prevent misalignment of pistons 360 ratchet swing allows access at any angle Extended reversing lever allows for easy change from spreading to retracting $ $ $ $ LIS Dual Piston Brake Pad Spreader Compresses dual brake pistons simultaneously. Makes dual piston pad replacement a simple job $ LIS Quick Quad Pad Spreader A quick way to spread brake pads and compress disc brake pistons for pad replacement on single, double and quad piston calipers Simultaneously compresses all four pistons on quad piston applications Can be used while caliper is on the vehicle $ JAN-30 FEB October to December 31, 2017

29 BRAKE SERVICE BRAKE SERVICE TOOLS $ GW-3163D Disc Brake Piston Tool for Most Domestic and Import Vehicles Designed to rotate the parking brake-activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with 4-wheel disc brakes. $ SUN-3930 Master Brake Caliper Tool Set Contains caliper adapters that range from 1-3/16" to 2-1/2" as well as adapters specifically designed to service Nissan, Saab, and Honda models Contains a caliper rotation tool with left hand threads, especially useful when working on Ford Freestyle, 500, 2008 Taurus, and Taurus X models CTA Pin Brake Piston Wind Back Tool For use with late model VW, Audi, BMW and Volvo with electromechanical parking brakes (EPB) $ $ AST Piece Brake Caliper Tool Kit for Domestic, Asian and European Vehicles SIDE A $ CAL-723 Double-Sided Two & Three Pin Adjustable Brake Piston Tool Rotates brake pistons back into the caliper on domestic and import vehicles with self adjusting parking brakes $ CAL Piece Brake Caliper Turn Back Tool Kit Allows you to rewind the pistons in brake calipers Fits most Alfa Romeo, Audi, Citroen, Ford, Honda, Jaguar, Land Rover, Mazda, Mercedes, Mini, Mitsubishi, Nissan, Lancer, Toyota, VW, Volvo SIDE B ATD Piece Disc Brake Caliper Tool Set For use on most domestic & import 2WD & 4WD vehicles Use on front or rear brakes AST Piece Professional Brake Tool Set $ $ CL Universal Drum Brake Spring Washer Pliers Work on drum brake hold-down spring washers Thin neck design allows to use in limited spaces (Toyota and Chrysler) $ SLY /8" Brake Caliper Adapter for Mazda, Mini, Volvo & Jaguar $ LIS T-Handle Single Spring Brake Tool Quickly and easily releases tension on large and small single spring brakes on GM vehicles $ October 1 to December 31,

30 BRAKE SERVICE BRAKE SERVICE TOOLS CAL-364 Toyota Brake Spring Tool Applications: 2000 & current Tacoma, Tundra, FJ Cruiser, 4Runner, Land Cruiser and Camry $ TEX-365 Universal Emergency Brake Tool Compresses spring on emergency brake cable for replacing brake shoe arm $ LIS Brake Spring Tool $ LIS Import Car Brake Clip Tool Removes and installs the brake clip and nail on brake shoes in seconds GW-298D Brake Spring Pliers $ $ $ TEX-450 Emergency Brake Cable Housing Pliers For vehicles with emergency brake cable at rear wheels, including drum brakes and some rear disc brakes TEX-451 Emergency Brake Cable Release Tool For vehicles with emergency brake cable at rear wheels, including drum brakes and some rear disc brakes $ GW-2774D Universal Brake Shoe Retaining Spring Tool $ GW-285D Brake Shoe Retaining Spring Tool Tool removes and installs retaining springs 11/16" to 7/8" in diameter. $ SLY " Long Parking Brake Cable Coupler Removal Tool For use on light duty trucks, SUV s and vans with drum or disc brakes (1980-current Dodge, Ford and GM models) that are usually rear wheel drive $ BRAKE LATHE BITS BRAKE ROTOR HONES Brake Lathe Bits Pack of 10 Part # Description Price SHA Fits AMMCO 4000 SHA KWIK-WAY Bits SHA FMC Bits $23.33 $53.13 $47.17 Flex Hones for Brake Rotors and Flywheels Part # Grit Price BRM-RMFH60Z25 60, Coarse BRM-RMFH120Z25 120, Medium $66.07 $ JAN-30 FEB October to December 31, 2017

31 BRAKE SERVICE BRAKE SERVICE TOOLS FOR HEAVY DUTY TRUCKS TGR Manual Slack Adjuster Puller Safely and efficiently removes all makes and models of manual slack adjusters Can be used with a 1/2" impact tool $ LIS Truck Brake Cage Bolt Socket, 3/4" Extra deep socket loosens the cage bolt to unlock air brakes on trucks. Also removes the air brake booster for replacement. $ TGR Gunite/Brunner/Bendix Slack Adjuster Puller Safely and efficiently removes virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters Can be used with a 1/2" impact tool $ LIS Truck Brake Cage Bolt Socket, 15/16" Works well on the 30/36 spring brakes for Autocar, CCC Style Dump Trucks, and Garbage Trucks with MGM Brakes $ $ TGR Haldex Multi Adjustable Slack Adjuster Puller Safely and efficiently removes virtually all Haldex self-adjusting slack adjusters including left offset, right offset and standard elongated arm designs from either side Can be used with a 1/2" impact tool LOC-890 Truck Brake Spring Tool Easily connects rear drum brake return springs $ OTC-5055 Manual Brake Slack Adjuster Puller for Trucks & Trailers Puller fits many manual adjuster types $ LOC-895 Universal Eaton Truck Brake Spring Tool Easily installs Eaton air brake shoe anchor springs $ OTC-5056 Automatic Brake Slack Adjuster Puller for Trucks & Trailers Works on Rockwell, Haldex, Gunite, and Bendix automatic adjusters $ LAN-7578 Heavy Truck 7/16" Haldex Automatic Slack Adjuster Wrench Used for brake adjustment on heavy trucks equipped with Haldex slack adjusters 7/16" 6 point extra long wrench (22-25 ft-lbs) $ ATD-5164 Air Brake Service Tool Kit Puller tools for slack adjusters and push-rod clevis pins used on many brake systems of Class 7 & 8 vehicles Works on manual and automatic slack adjusters $ LAN Piece Heavy Truck ROCKWELL Automatic Slack Adjuster Tool Set Used for adjusting Rockwell automatic slack adjusters Forked-end tool to release the tensioner button 5/16" double square offset reversible wrench with easy grip handle $ OTC-5081 S-Cam Air Brake Spring Tool Safely replace brake shoes on heavy-duty tractors and trailers Simply hook the retaining spring loop and press down against the axle $ LAN-8569 Heavy Truck 9/16" Bendix Automatic Slack Adjuster Wrench For brake service and slack adjuster installation on heavy duty trucks equipped with Bendix automatic slack adjusters 9/16" extra long wrench is used to turn the manual adjuster hex $ October 1 to December 31,

32 MEASURING & PRECISION TOOLS SPECIALTY MEASURING TOOLS FOW Cylinder Bore Gauge Range: 1.4" to 6" Graduations:.0005" $ CEN-3D101 Long Range Dial Indicator Test Set with Magnetic Base Range: 0-1" Graduations: Reading: Imported product CEN-3S116 6 Piece Heavy Duty Telescopic Gauge Set Range: 5/16" 6" Self-centering gauges check slots, grooves, recesses and cylinders Measurement is read with a micrometer $ CEN-6494A Angle Finder Used to measure truck and automotive front ends and drive shaft angle $ CEN " Precision Straight Edge $ $ FOW Flexible Arm Indicator Set with ANYFORM Magnetic Base 70 steel segments help fit the mag base to practically any shape or form Range: 0-1" Graduations:.001" Reading: lb magnet pull Dust, water and oil resistant FOW Flexible Arm Indicator Set with Magnetic Base Range: 0-1" Graduations:.001" Reading: Dust, water and oil resistant FOW Indicator Set with Magnetic Base Range: 0-1" Graduations:.001" Reading: Dust, water and oil resistant $ $ $ FOW Electronic Cylinder Bore Gauge Range: 1.4"-6"/35mm-150mm Resolution:.0005"/.001mm Bar graph and numeric digital display Self-centering Preset with recall Absolute/Incremental measurement Min/Max/Total indicator runout $ FOW " Digi-Pro Electronic Protractor Includes embedded magnets for unique measurement areas On/Off, Zero, Hold Invertible display feature Full, 360 measuring range Accuracy: ±.2 Uses standard 3V lithium battery $ $ TEX-432 Universal Thread Gauges Identifies bolts, fittings, pipe threads and spark plugs with US or metric threads JAN-30 FEB October to December 31, 2017 Outside Micrometer Sets FOW SAE Range: 0-4" Graduations:.0001" FOW Metric Range: 0-100mm Graduations:.01mm $ $ FOW Xtra-Value II Electronic Micrometer Range: 0-1" / 0-25mm Resolution:.00005"/.001mm Accuracy: ±.00016" /.004mm Large LCD display Absolute and incremental modes Includes a FREE ball attachment $97. 95

33 SPECIALTY MEASURING TOOLS MEASURING & PRECISION TOOLS CEN-3D103 Disc Rotor/ Ball Joint Gauge Range: 0-1" Graduations: Reading: Imported product $ FOW Disc and Rotor/ Ball Joint Gauge Dust, water and oil resistant indicator Range: 0-1" (0-25mm) Graduations:.001" (.01mm) $ Electronic Caliper Gauges Reading:.01"/.1mm/1/64ths Accuracy:.01"/.3mm/1/64ths Spring loaded with locking nut FOW External Caliper Gauge Range: 0-6"/150mm FOW Internal Caliper Gauge Range:.5-6"/150mm $ $ FOW " Electronic Level Measuring range: 4 x 90 Resolution:.05 Accuracy: ±.2 Repeatability: ±.05 Standard 9V battery (250 hours life) Reversible reading for inverted use $ FOW Mini-Mag Protractor Angle Measurement Tool Provides instant 360 digital inclination display of any angle Embedded magnets on both sides and the bottom with 3.5 lbs pull Ideal for a variety of measurements Display inverts for easy reading Resolution:.05 Accuracy: ±.2 Repeatability:.05 $ Hold feature 2-3/8" W x 2-3/8" H x 1-3/8" D FOW Inch/Metric Dial Caliper Range: 6" / 150mm Graduations:.001" /.02mm Dial face reads in both inch (black) and metric (red) 4-way measurement: inside, outside, depth and step FOW Dial Caliper Range: 0-6" Graduations:.001" 4-way measuring FOW Electronic Caliper Range: 6"/150mm Accuracy: ±.008" Direct inch/metric/fraction conversion Resolution.0005"/.01mm (fractions by 1/64" increments) Absolute/incremental measurement $ $ $ FOW AutoCal Electronic Caliper Range: 6" / 150mm Direct inch/metric/fraction conversion Resolution:.0005" /.01mm / 1/128" Super large display and heavy duty frame Combined thumb rest and thumb roll for fine adjustment Dust, water and oil resistant $ QUIPALL Electronic Inch/Metric Stainless Steel Calipers Part # Range Graduations Price QPL " (0-150mm) 0.001" QPL " (0-200mm) 0.001" $19.95 $36.95 October 1 to December 31,

34 MEASURING & PRECISION TOOLS FEELER GAUGES TAPE MEASURES LAN-343A 25-Blade Metric Feeler Gauge 3" long x 1/2" From 0.04mm 1.00mm $ TIT Piece Dual-Rule SAE/Metric Tape Measures Includes 12 ft. (3.5m) and 25 ft. (7.5m) tapes Hands-free blade lock $9. 98 LAN-36A 32-Blade Feeler Gauge 3" long x 1/2" From " 0.035" Includes a 0.010" brass blade for transistorized engines $7. 95 Quick Read SAE Tape Measures Hands-free blade lock LAN-316A 16-Blade 45 Offset Tappet Feeler Gauge 4" long x 1/2" From 0.005" 0.020" For checking valve clearances $7. 95 Part # Description Marking Price TIT feet x 3/4" SAE TIT feet x 1" SAE TIT feet x 1" SAE $4.78 $7.61 $10.28 LAN Blade Feeler Gauge 12" long x 1/2" From " to 0.040" $ ATD Piece SAE Tape Measure Set 12, 16, 25 and 33 feet long Inch/feet reading $ GW-161D 32-Blade Feeler Gauge 3-5/16" long x 1/2" From " " ( mm) Includes a 0.010" brass blade for use with electronic ignition $ P1000 Series Cushioned Blade Return Measuring Tapes Part # Description Price LUF-PHV1035CME LUF-PHV1048CME 16 feet (5m) HI-VIZ orange SAE/metric 3/4" wide blade 25 feet (7.5m) HI-VIZ orange SAE/metric 1" wide blade $14.95 $ JAN-30 FEB October to December 31, 2017

35 AIR CONDITIONING RECOVERY / RECYCLING / RECHARGING UNITS 34788NI / 34788NI-H AC FOR CERTAIN DESTINATIONS MTC-COMMANDER4000 Automatic R1234yf & Hybrid A/C System Recovery, Recycle, Recharge Machine 6 CFM vacuum pump 8" command center colour touch screen Automatic and manual procedures Refrigerant identifier and database Automatic vacuum leak test: programmable Auto oil discharge Auto and manual air purge Hose flushing Vehicle A/C system flushing Auto filter and full tank alarm Low refrigerant alarm Cylinder heater Thermal printer Wi-Fi capable Multiple languages FOR CERTAIN DESTINATIONS 34988NI A/C System Recovery, Recycling, Recharging Machines FUNCTIONS: ROB-AC ROB-34788NI ROB-34788NI-H ROB-34988NI Gas type 1234YF R134a R134a R134a Fully-automatic function Automatic dye inject Automatic oil measure & inject Automatic oil drain Oil inject * ** Refrigerant & oil database Optional Optional Optional Refrigerant identifier Optional Optional Printer Optional Optional Visible and/or audible alarm Vacuum leak test Automatic air purge Automatic refrigerant refill Vacuum feature Refrigerant charging *** *** *** Refrigerant management system Hybrid vehicle Multilingual display Price * One oil bottle. ** Two oil bottles and one UV dye bottle. *** Charge mode from high or low side, or use both sides. ROB Recycling Filter-Drier Spin-on filter specially belnded for maximum acid and moisture removal $ FOR CERTAIN DESTINATIONS MTC-COMMANDER2000 Automatic R134a A/C System Recovery, Recycle, Recharge Machine 6 CFM vacuum pump 8" command center colour touch screen Automatic and manual procedures Refrigerant database Automatic vacuum leak test: programmable Auto oil discharge Auto and manual air purge Auto oil injection Auto filter and full tank alarm Low refrigerant alarm Cylinder heater Optional thermal printer Wi-Fi capable Multiple languages FOR CERTAIN DESTINATIONS FX Series Refrigerant Management Centers for R134a and/or R1234yf Systems Quickly and efficiently recover, recycle and recharge automotive A/C systems Monitors filter life and refrigerant usage Includes refrigerant identifier A/C Systems capacity database included 7" colour touch screen control panel Quickly access all functions from the main screen 50 lb recovery tank (two with the FX3030 model) 6 CFM vacuum pump/50 micron rated Includes printer Supports multiple languages Warranty: 1 year labour, 2 years parts, 5 years on the compressor Part # Refrigerant Price CPS-FX3030 R134a & R1234yf CPS-FX134A R134a CPS-FX1234 R1234yf FOR CERTAIN DESTINATIONS FX3030 October 1 to December 31,

36 AIR CONDITIONING RECOVERY / RECYCLING / RECHARGING UNITS VACUUM PUMPS $ $ MTC Complete A/C Recovery System with a 30 Lb DOT Tank Works with all refrigerants Recovers and removes moisture, oil and debris from refrigerant 1/2 HP oil-less compressor with a built-in high volume cooling fan for fast recovery Color-coded sight gauge identifies when filter dryer replacement is needed MTC-91585B 6 CFM Single Stage Charging Station 6 CFM single stage vacuum pump R134a 2-way manifold Electronic charging station Manual couplers Set of hoses MTC Spark Free Twin Turbo Refrigerant Recovery Machine for R1234yf For use with all refrigerants including R410A, CFC, HCFC and HFC's 60 ft. hoses, low side coupler and 30 lb DOT tank 1/2 HP oil-less compressor Single Stage Rotary Vane Deep Vacuum Pumps 110 V, 60 Hz Part # CFM HP Microns Price MTC-90062B 3 1/4 75 MTC-90066B 6 1/4 75 $ $ MTC Twin Turbo Refrigerant Recovery Machine for Buses & Fleet For use with all refrigerants including R410A, CFC, HCFC and HFC's 50 lb DOT tank 1/2 HP oil-less compressor Recovery rate: - Direct vapor up to.526 lb/min - Direct liquid up to 4.75 lb/min - Push pull up to lb/min VacuMaster Single Stage Vacuum Pumps 110V, 60 Hz 1/4" flare & 1/2" ACME intake ports Part # CFM HP Microns Price ROB /5 115 ROB /4 75 ROB /2 75 $ $ $ REFRIGERANT SCALES MTC-98210A Accu-Charge II Electronic Refrigerant Scale Offers programming capabilities 176 lbs capacity (80kg) 60 hours performance with one 9V alkaline battery Accuracy: ± 0.15 oz, ±0.01 lb, ±0.01 kg Resolution: 0.02 lbs / 0.01 kg Built-in overload protector $ $ ATD-3637 Heavy Duty Electronic Refrigerant Charging Scale Capacity: 243 lbs (110 kg) Resolution: ± 0.05 lbs/0.4 oz. Provides user with precise charging capabilities JAN-30 FEB October to December 31, 2017

37 AIR CONDITIONING MANIFOLD GAUGE SETS & ACCESSORIES 82834SL MTC-99872A R134a Automatic Digital Manifold Gauge Set Displays temperature, pressure and vacuum readings for R134a Refrigerant and oil capacity readings for 55 automobile manufacturers Includes (3) 72" hoses and manual couplers MTC PRO R134a/R12 Alum. Manifold Gauge Set Set of 3 R134a and R12 hoses Manual couplers Recalibrateable gauges ATD-3695 Deluxe Dual R134a/R12 Aluminum Manifold Gauge Set R12/R134a gauges (3) 60" hoses Manual couplers 1/4" SAE M x 1/2" ACME-F adapter Gauge guards $ ATD-3696 Deluxe Dual R134a/R12 Aluminum A/C Manifold Gauge Set R12/R134a gauges (3) 96" hoses Manual couplers 1/4" SAE-M x 1/2" ACME-F adapter Gauge guards Molded storage case R134a Safety Lock Couplers Part # Description Price MTC-82834SL MTC-82934SL $ $ $ $220. MTC R134a/R12 Coupler Conversion Set ATD-3653 R134a High Side Coupler $ High Side 14mm F x 16mm Low Side 14mm F x 13mm 82934SL $45.10 $45.10 MTC R1234yf Manifold Gauge Set (3) 60" hoses R1234yf high and low side couplers Recalibrateable gauges $ A/C Charging Hoses Part # Length Colour Price ATD " Blue ATD " Red ATD " Yellow ATD " Red $32.23 $32.23 $37.20 $43.41 ATD-3652 R134a Low Side Coupler $ ATD-3525 R134a/R12 Coupler Conversion Set Converts R12 gauges to R134a $ MTC UV R134a 2-Way Brass Manifold Gauge Set 2-1/2" gauges (3) 60" hoses Manual couplers 10-application A/C universal dye injection kit $ ROB-49134A Economy R134a Aluminum Manifold Gauge Set 90 manual couplers 60" R134a hose $ ROB-48134B R12/R134a Brass Manifold Kit 90 manual couplers 60" R134a & R12 hose set $ October 1 to December 31,

38 AIR CONDITIONING A/C SERVICE TOOLS & ACCESSORIES MTC Total A/C System Quick Flush Kit Specific fluid for the inner flushing of air conditioning and refrigeration systems Pressurized to 150 PSI. No need for shop air or bottled flush. No-puncture can is valve core controlled. Self evaporating, non-toxic $ $ CTA-7539 A/C Compressor Clutch Remover/Installer for GM Services GM A6 and R4 compressors with SAE threads (not for clutches with metric threads) Installer tool ID: 3/8" - 24 MTC-91046A A/C System Flush Kit Removes refrigerant oil debris during retrofitting or compressor replacement Includes flush gun, hose, canister and canister adapter Universal Valve Core Remover $ A MTC-91000A Deluxe A/C Clutch Hub Puller/Installer Kit Kit contains a complete offering of A/C compressor clutch hub pullers and installers for GM, Ford, Chrysler and imports. $ Part # Description Price MTC For R134a MTC For R12 ATD-3638 Universal Large Bore A/C Valve Core Remover/Installer Used on R12/R134a standard and JRA/EATON large bore R134a valve cores $8. 63 $9.92 $9.40 IMP-127C Compressor Access Valve Wrench for Refrigeration and A/C Reversible 1/4", 3/8", 3/16" and 5/16" square drives For hard to reach access valves $ ATD-3639 No Gas loss R134a A/C Valve Core Remover/Installer For 13mm and 16mm high and low service port standard type valve Built-in ball valve retains charge and allows access to A/C system $ MTC R12 and R134a Valve Core Repair Kit Includes replacement valve cores for valve core removers and installers $ MTC HYDRA-KRIMP for Fabricating A/C Hoses Easily crimps barbed and beaded fittings Includes a complete set of dies covering hose sizes #6, #8, #10, #12 and reduced barrier #6, #8, #10 & #12. $ ATD Piece Charging Hose Seal and Depressor Assortment $ MTC Manual A/C Hose Crimper The unit can be easily mounted to a bench using the holding fixture or held securely in a vice. Includes a complete set of dies covering standard hose sizes #6, #8, #10 and # JAN-30 FEB October to December 31, 2017 ATD-3880 A/C System Valve Core & Cap Assortment for R134a & R12 ATD Piece HNBR R12 and R134a O-Ring Assortment $ $ $48. 37

39 AIR CONDITIONING REFRIGERANT IDENTIFIERS / SEALANT DETECTOR NEU Ultima ID 1234YFP Refrigerant Identifier Determines refrigerant purity Identifies R1234YF, R134A, R22, and Hydrocarbons Displays % air in pure R1234YF & R134A Built-in printer Upgradable via USB NEU Ultima ID Refrigerant Identifier Quickly and accurately determines refrigerant purity Identifies R12, R134a, R22, HC (hydrocarbons), and EPA S.N.A.P. approved blends Includes R12 and R134a sample hoses Includes R134a adapter fitting for ACME ported cylinders Includes 12V DC battery clips Built-in printer Portable storage case 1 year warranty NEU Replacement Filter for Ultima ID NEU Rechargeable Battery for Ultima ID $ $ $ NEU Rechargeable Battery AND Battery Charger for Ultima ID NEU A/C Sealant Detection Kit Prevents possible damage to valuable recovery equipment Works on R134a and R12 systems Includes: 10 test cartridges, R134a & R12 couplers, test hose, flow meter, syringe $ NEU Replacement Cartridges For #NEU $ NEU Mini ID Refrigerant Identifier for R134a Easy to use PASS or FAIL result indication. Green LED is illuminated for R134a purity greater than 95%, Red LED for purity less than 95%. FAULT and EXCESS AIR indication 12V DC power requirement $ REFRIGERANT DETECTORS CPS-LS790B Leek-Seeker Refrigerant Leak Detector Improved power and filter circuitry 10 sensitivity levels with bright LED visual indicators 18" flex probe & exclusive Ion-Pump sensor Evaporator water filter eliminates false alarms $ $ MTC Intella Sense III Combustible Gas Leak Detector High sensitivity sensor Response time: less than 1 second High/Medium/Low sensitivity selection Includes (2) C batteries, leak test vial and replacement filters CPS-LDA1000UV Electronic Leak Detector with E-MOS (Enhanced Metal Oxide Sensor) Technology Includes mini UV clip-on light 18" flexible probe Meets all US and International standards including HFO-1234YF and R134a Superior sensitivity to all HFC, HCFC, and CFC gases and blends as well as SF6 Visual and audible leak indicators 2 year warranty excluding batteries and sensor NITROGEN LEAK DETECTION SYSTEM CPS-NITROKITG A/C Nitrogen Pressure Leak Test Kit Pressure test a system after initial installation or service work to ensure the absence of leaks prior to the introduction of refrigerant Includes: Manifold with PSIG 3-1/8" gauge Nitrogen regulator R134a high side snap coupler 6 ft. red and 8 ft. yellow 1/4" service hoses High side coupler $ MTC IntellaSense II Refrigerant Leak Detector High sensitivity, fast response Intelligent tip design senses environmental conditions to eliminate the potential of false alarms Detects combustible gases, hydrogen, all refrigerants (CFC s, HCFC s, HFC s) Includes: (2) C batteries, leak test vial and replacement filters MTC in 1 Electronic/UV Leak Detector Detects all refrigerants: CFC s, HCFC s, HFC s 6 levels of sensitivity (15 levels of detection) Tri-colored visual leak level indicator Detects leaks as small as 1/10 oz (3 gr) per year TIF-ZX Refrigerant Detector Refrigerant specific detection Detects ALL halogenated refrigerant levels below 0.1 oz/year True mechanical pump provides instant response and clearing Sensor failure indication Rechargeable batteries $ $ $ $ October 1 to December 31,

40 AIR CONDITIONING ULTRAVIOLET LEAK DETECTION SYSTEMS A/C OIL INJECTION SYSTEMS UV A Spotgun Jr./UV Phazer BLACK (AAA) Kit Includes: UV-Phazer BLACK with a high power True-UV LED (3 AAA batteries) Spotgun Jr. injection system with R12 and R134a adapters Universal A/C dye cartridges (4 x 1oz/30mL) UV enhancing glasses Service stickers Services up to 40 vehicles UV A Spotgun / Micro-Lite Kit Includes: 50W Micro-Lite with 16 ft. cord Spotgun injector with R12 and R134a adapters Universal A/C dye cartridge (8 oz./240 ml) Dye cleaner UV enhancing glasses Service stickers Services up to 64 vehicles UV A Spotgun System Kit The world s most popular and professional injection method. Pull the trigger to inject a precise amount of dye into the A/C system and you re done. Includes: Spotgun injector with R12 and R134a adapters A/C ExtenDdye cartridge (8 oz./240 ml) Service stickers Services up to 64 vehicles R1234YF Hose Adapter Assembly with Coupler $ $ $ Part # Injection System Price UV Spotgun UV Spotgun Jr. $79.95 $79.95 Spotgun Injection Systems & Leak Detection Kits UV H Hybrid AC Oil Eco-Twist Kit Eco-Twist injection system R134a applicator hose 1 oz / 30 ml Ester Oil Hybrid cartridge 1/4 oz / 7.5 ml A/C dye cartridge UV H Hybrid AC Oil Refill Kit Works with Eco-Twist injection system Includes: 1 oz / 30 ml Ester Oil Hybrid cartridge 1/4 oz / 7.5 ml A/C dye cartridge UV YF Spotgun HFO Oil Injection Kit R1234yf adapter PAG 46 HFO oil cartridge (8 oz / 240 ml) UV Spotgun Oil Injection Kit R12 and R134a adapters PAG 46 oil cartridge (8 oz / 240 ml) UV PICO-Lite Fluorescent Leak Detection Light 1 Watt Luxeon LED bulb Over 4 hours of peak performance Batteries included UV UV Phazer Neo Rechargeable Leak Detection Light Adjustable focus UV power rating: 1135 UV UV Phazer Black AAA Includes (3) AAA batteries Adjustable focus UV power rating: 810 LEAK DETECTION FLASHLIGHTS n $ $ $ $ $ $ YF $ UV LeakGuard Professional A/C Sealant Injection System Seals hard to find A/C leaks Kit includes: 2 cartridges of LeakGuard UV dye Primer cartridge to pre-fill hose High side adapter hose $ UV EU LeakGuard Eco-Twist Screw Down A/C Sealant Injection System Permanently seals leak Safe for all A/C systems Contains UV dye Comes with 1 oz / 30ml LeakGuard cartridge A/C SEALANT INJECTION SYSTEMS $ UV Rechargeable UV Phazer Black Adjustable focus UV power rating: 810 MTC-53518UV Rechargeable UV Flashlight Zooms in and out Includes safety glasses, 110V charger and (3) AAA batteries for backup power $ MTC Mach IV Flexible UV Light (4) UV LEDs $ $ JAN-30 FEB October to December 31, 2017

41 OILS, DYES & SEALANTS A/C OILS, DYES & SEALANTS A/C Oils Bottle format and Spotgun Injection System cartridge format 8 oz (240 ml) #488104H: 4 oz (120 ml) Part # Description Viscosity System Price UV P PAG Oil 46 Spotgun Injection System UV PBD PAG Oil with A/C ExtenDye 46 Bottle UV P PAG Oil 100 Spotgun Injection System UV PBD PAG Oil with A/C ExtenDye 100 Bottle UV P PAG Oil, Meets GM spec. # Spotgun Injection System UV P PAG Oil 150 Spotgun Injection System UV E Ester Oil 100 Spotgun Injection System UV H POE Ester Based Oil for Hybrids 68 Spotgun Injection System $14.95 $6.95 $14.95 $6.95 $14.95 $14.95 $14.95 $ P P P E H P PBD Universal A/C Dye & A/C ExtenDye Cartridges For use with Spotgun, Spotgun Jr. and universal dye injection systems Works in R12, R134a and now R1234YF systems Part # Injection Gun System Cartridges Volume Applications (Up to) UV A Spotgun Suitable for R1234YF systems 1 8 oz (240 ml) 64 UV Universal 1 4 oz (120 ml) 32 UV A Spotgun Jr. 6 1/4 oz (7.5 ml) 6 UV A Spotgun Jr. 4 1 oz (30 ml) 40 Price $59.95 $52.95 $26.95 $ A Universal A/C Dyes & A/C ExtenDye Pinpoint leaks in A/C systems SAE J2297 certified, OEM approved Service stickers included Part # Bottles Volume Price UV A 1 8 oz (240 ml) UV-B499024A 6 1 oz (30 ml) UV-B499012A 12 1/4 oz (7.5 ml) UV packets 1/4 oz (7.5 ml) $42.95 $59.95 $39.95 $ A B B LeakGuard A/C Sealant Cartridges For use with Spotgun Jr. and Eco-Twist injection systems Contains UV dye SAE J2297 certified, OEM approved Injection Gun System Cartridges Volume Price Part # UV Spotgun Jr. 1 1 oz (30 ml) UV EU Eco-Twist 2 1 oz (30 ml) $17.95 $ EU SPECIALITY DYES Multi-Purpose Dyes Pinpoint leaks in engine oil, transmission, hydraulic, power steering, gasoline and diesel fuel systems Service stickers included Part # Bottles Volume Price UV oz (240 ml) UV-B oz (30 ml) $32.95 $26.95 B Radiator Coolant Dyes Pinpoint leaks in cooling systems including radiator, hoses, fittings, water pumps and head gaskets Service stickers included Formulated for (Coolant Type) Bottles Volume Price Part # UV Regular (green) 1 8 oz (240 ml) UV-B Regular (green) 6 1 oz (30 ml) $27.95 $ B October 1 to December 31,

42 THERMOMETERS INFRARED THERMOMETERS ST61 ST81 Non-Contact Infrared Thermometers Part # Range Laser Price RAY-MT4UVB -18 C to 400 C ( 0 F to 750 F) Single point RAY-MT6UVB -30 C to 500 C (-20 F to 932 F) Single point RAY-ST20XBUSVB -32 C to 535 C (-25 F to 999 F) Single point RAY-ST25XXUS -32 C to 535 C (-25 F to 999 F) Cross point RAY-ST61-32 C to 600 C (-25 F to 1100 F) Single point RAY-ST81-32 C to 760 C (-25 F to 1400 F) Single point $97.95 $ $ $ $ $ MT4UVB MT6UVB ST20XBUSVB ST25XXUS $ PWP-TEMPKIT Temperature Probe Kit Dual-zone digital thermometer with a wireless remote temperature sensor The remote sensor can transmit temperature readings up to 60m (195 ft.) away from base unit Users can monitor temperature differences (ambient versus AC outlet, inside versus outside temps and more Use moveable clip to attach remote to air vents or grilles to monitor outlet temps F and C readings Operating environment: -4 F to 158 F (-20 C to 70 C) Requires 2 x AA and 2 x AAA batteries MTC-52224A-SP 12:1 Laser Thermometer Temperature range: 58 F to 932 F (-50 C to 500 C) Single laser spot $ MTC-52225A-SP 30:1 Laser Thermometer Temperature range: -76 F to 1400 F (-60 C to 760 C) Temperature range with thermocouple: -83 F to 1999 F (-64 C to 1400 C) Single laser spot Modes: MIN, MAX, DIFF, AVG $ A-SP 52225A-SP ATD :1 Deluxe Infrared Thermometer with Laser -22 F to 1022 F (-30 C to 550 C) $ ESI-EST-45 12:1 Professional Infrared Thermometer -22 F to 932 F (-30 C to 500 C) $ TIT :1 High Temp Infrared Thermometer -58 F to 1202 F (-50 C to 650 C) Built-in laser pointer Automatic data hold Auto power off Max/Min function $ FLU :1 Single Laser Infrared Thermometer Temperature range: -30 C to 500 C (-22 F to 932 F) IP54 rated for dust and water resistance 3m (9.8 feet) drop tested Small and lightweight Min/Max/Avg/Dif; Hi and Lo alarms Powered by (1) AA battery $ FLU Visual Infrared Thermometer Temperature range: -10 C to 250 C (14 F to 482 F) Blends a visual image with a heat map overlay to quickly identify the location of issues Focus-free system Includes visual camera 4 Gb memory card POCKET THERMOMETERS $ CPS-TMDP Digital Pocket Thermometer -58 F to 302 F (-50 C to 150 C) Stainless steel probe and pocket clip JAN-30 FEB October to December 31, 2017 $ ATD " Digital Pocket Thermometer -58 F to 302 F (-50 C to 150 C) ON/OFF & auto shut-off after 10 minutes Includes plastic sleeve with pocket clip $9. 40 MTC " Dial Analog Pocket Thermometer 0 F to 220 F Includes plastic sleeve with pocket clip

43 TUBING & FLARING TOOLS TUBE CUTTERS TUBE BENDERS Tubing Cutters Includes 0.75" blade for copper & brass tubing Replacement blades available: TIT for copper/brass tubing; TIT for stainless steel tubing Part # Description Price TIT Mini Tubing Cutter Cuts 1/8" to 7/8" diameter tubing TIT Tubing Cutter Cuts 1/8" to 1-3/8" diameter tubing IMP-TC1000 Hi-Duty Tube Cutter For 1/8" to 1-1/8" (4mm to 28mm) O.D. tubing Unique design eliminates spiraling for clean right angle cuts $ $10.28 $37.36 IMP-370FHC Triple Head 180 Tube Bender with Calibrated Markings For 3/16", 1/4", 3/8" and 1/2" tubing $ IMP-470FH Triple Head 180 Tube Bender with Roto-Lok Indexing Handle For 3/16", 1/4", 5/16" and 3/8" tubing $ IMP-TC1050 Mini Tube Cutter For 1/8" to 5/8" (4mm to 15mm) O.D. tubing 1-1/4" swing radius $ ATD-5472 Triple Head 180 Tube Bender Makes 180 bends in 1/4", 5/16" and 3/8" copper, brass, aluminum and steel tubing $ CAL " Capacity Ratcheting Tubing/PVC Cutter Cuts hoses, tubing, battery cables and copper cables $ ATD in-1 Tube Bender Bends 3/16", 1/4", 5/16" and 3/8" O.D. brass, copper, steel or aluminum tubing $ RC-375 4" Mini Ratcheting Tube Cutter Cuts copper, aluminum, brass, stainless steel, plastic and PVC from 1/8" to 3/8" $ ATD-912 Heavy Duty Tube Bender Pliers Bends 3/16", 1/4", 5/16" and 3/8" diameter copper and steel tubing without kinking or collapsing $ RC " Heavy Duty Ratcheting Tube Cutter Cuts copper, aluminum, brass, stainless, plastic and PVC from 5/16" to 1-1/8" VHT Piece Tubing Bender Pliers 3/16", 1/4" and 5/16" $ $ October 1 to December 31,

44 TUBING & FLARING TOOLS IMP-293F ISO Bubble Flaring Tool Kit Includes 4.75, 6, 8 and 10mm adapters $ FLARING TOOLS $ ATD-5463 Double Flaring Tool Kit 3/16", 1/4", 5/16", 3/8", and 1/2" adapters Designed for double or single flare in copper, aluminum, soft steel brake line, and brass tubing (to 45 ) IMP-93FB 45 Double Flaring Tool Kit For 3/16", 1/4", 5/16", 3/8", and 1/2" O.D. tubing OTC-4503 Double Flaring Tool Kit Designed for double or single flare in copper, aluminum, soft steel brake line, and brass tubing (to 45 ) Includes five adapters: 3/16" to 1/2" (4.8mm to 12.7mm) ATD-5464 ISO Bubble Flaring Tool Kit 4.75, 6, 8, & 10mm adapters $ Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems $ $ ATD-5480 In-Line Flaring Tool Kit Low profile design allows for use on or off the vehicle For use on thin walled steel and copper tubing Includes 4.75mm and 3/16" adapters $ OTC-4504 ISO Bubble Flaring Tool Kit Designed for crack-free bubble flares on soft steel tubing used in automotive brake systems Includes four dies: 4.75, 6, 8, and 10mm adapters $ TIT /16" Double Flaring Tool For use with creating a double flare on 3/16" steel, nickel & copper tubing Compact design allows for on-vehicle use or remove handle to mount in bench vise Comes with flaring tool, double ended OP1/OP2 punch, die lubricant & positioning bolt $ SK Metric Bubble Flaring Tool Kit 4 sizes of tubing: 4.75mm, 6mm, 8mm and 10mm O.D. Will flare soft double wall steel tubing with a wall thickness up to 0.028" $ CAL-160 Brake Flaring Tool Kit Convenient handle to make bake flares easier Flares 3/16" and 4.75mm tubing for bubble or double flares $ CL Universal Hydraulic Flaring Tool Set with Magnetic Connection Head Push-connect flares: 1/4", 5/16" & 3/8" 45 degree single/double flares: 3/16", 1/4", 5/16", 3/8" & 1/2" GM fuel line, brake line and transmission line flares: 5/16" & 3/8" Metric ISO bubble flares: 4.75mm, 6mm, 8mm & 10mm MTC PRC Universal Hydraulic Flaring Tool Set Fabricates push-connect flare, 1/4", 5/16" & 3/8" GM fuel line flare 5/16" and 3/8" Flare/double flare 3/16", 1/4", 5/16", 3/8" and 1/2" Metric bubble flaring 4.75, 6, 8 and 10mm $ $ WHILE SUPPLIES LAST CAL-161 In-Line Flaring Tool Kit Low profile design allows for use on or off the vehicle For use on thin walled steel and copper tubing Includes 4.75mm and 3/16" adapters CAL-165 Master Inline Flaring Set Set includes everything needed to produce: 3/16", 1/4", 5/16", 3/8" double and single flares 4.75mm, 6mm, 8mm double and bubble flares $ LIS Combination Flaring Tool Includes all the adapters and tools necessary for single and double flaring (standard and metric) plus the ISO (bubble) flare Works on aluminum, copper and soft steel tubing Not recommended for stainless steel $ $ JAN-30 FEB October to December 31, 2017

45 PULLERS Mechanical Grip-O-Matic Pullers PULLERS - UNIVERSAL 2 & 3 JAW Part # Capacity / Jaws Maximum Reach Maximum Spread Screw Size x Length Price OTC Ton, 2/3 Jaw 3-1/4" 4-3/4" 3/8" 24 x 4-7/8" OTC Ton, 2/3 Jaw 5-1/2" 7" 9/16" 20 x 6-15/16" OTC Ton, 2 Jaw 5" 9" 11/16" 18 x 9" OTC Ton, 2/3 Jaw 5" 10-1/2" 11/16" 18 x 9" OTC Ton, 2 Jaw 8-3/4" 9-1/2" 11/16" 18 x 9" OTC Ton, 2/3 Jaw 8-3/4" 11" 11/16" 18 x 9" OTC Ton, 2 Jaw 11" 12" 13/16" 16 x 12" OTC Ton, 2/3 Jaw 11" 12" 13/16" 16 x 12" $60.20 $57.95 $99.00 $ $ $ $ $ PUSH-PULLERS OTC-522 Large Gear and Pulley Puller Spread: 2" to 7-3/4" 8-1/4" wide block Screw size x length: 3/4"-16 x 11-5/8" $ Push Pullers Part # Capacity Maximum Reach Maximum Spread Screw Size x Length Price OTC Ton 8-1/4" 2-1/8" 7-1/4" 3/4" 16 x 12" OTC Ton 11-1/2" 3-1/8" 11-3/4" 1" 14 x 13-1/4" OTC Ton 10-1/2" 7" 16-1/4" 1-1/2" 12 x 17-1/4" $ $ $ OTC-7393 Gear and Pulley Puller Spread: 1-1/2" to 4-1/4" 4-7/8" wide block 2 Hex screws size x length: 3/8"-16 x 3" Centre screw length: 13" $ BEARING PULLERS & SPLITTERS Bearing Splitters Part # Maximum Spread Minimum Spread Screw Size Dist. Between Adjust. Screws OTC " 1/8" 3/8" /16" OTC /8" 1/2" 5/8" /8" OTC /4" 1/2" 5/8" 18 6" OTC " 1/2" 5/8" 18 6" OTC " 5/8" 1" /8" OTC /8" 3/4" 1" /4" Price $51.03 $96.96 $ $ $ $ ATD Ton Bearing Puller & Splitter Set 8" to 16" reach Bearing splitter with 4" capacity $ OTC Ton Single Pressure Beam Bearing Splitter Set Single point of adjustment allows quick attachment of splitter to the application Interchangeable legs shorten or lengthen the range of pull For use on most bushing or bearing jobs up to 3" in diameter OTC-4526 Heavy Duty Single Pressure Beam Bearing Splitter Single point of adjustment allows quick attachment of splitter to the application Interchangeable legs shorten or lengthen the range of pull For use on most bushing or bearing jobs up to 4" in diameter OTC-7494A Rear Axle Bearing Puller Set Sizes: 1" to 1-7/8", 1-5/16" to 2-3/8", 1-3/8" to 2-7/8" To be used with a slide hammer with 5/8"-18 thread (#OTC-7703) OTC Ton Capacity Bar-Type Puller/ Bearing Splitter Set $ $ $ $ October 1 to December 31,

46 PULLERS BEARING PULLERS & SPLITTERS SLIDE HAMMER PULLERS OTC-4534 Multipurpose Bearing and Pulley Puller Set For a wide range of pulling jobs, including: bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, and harmonic balancers $ $ ATD Ton Bar-Type Puller/ Bearing Splitter Set Perfect for a wide variety of pulling jobs Can be used separately or with other pullers or tools OTC-7947 Silver Slapper 8-Way Slide Hammer Puller Set Jaws can be set up for 2/3-way internal or external pulling jobs 5 lbs hammer and attachments $ OTC Way Slide Hammer Puller Set 5 lbs hammer Pulls flange-type rear axles and most front-wheel drive hubs Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements $ OTC Lbs Slide Hammer Puller 24" long 5/8" 18 threaded end FREE! #OTC-7168 (7/8" x 30" Jimmy Bar) with purchase of #OTC $ MUK Universal Bearing Ring Puller Three leg gripper with ultra sharp edges provides equal gripping power on each side, avoiding any tilt Easily adjustable clamping chain offers ideal grip and power Fits all kinds of bearings and sleeves between 40-60mm Also works on transmission and differential bearings and shims OTC-7790 Flange-Type Puller Set Capable of removing a wide variety of components having tapped pulling holes OTC-525 Flange-Type Puller Combination OTC-6930 Heavy Duty Flange-Type Puller FLANGE-TYPE PULLERS $ $ $ JAN-30 FEB October to December 31, 2017 $ SUN Lbs Slide Hammer Puller Set 8 function internal or external 3-jaw puller $ SG Lbs Slide Hammer & Pullers for Front Wheel Hubs and Rear Axles Pullers fit 4, 5 and 6 bolt patterns for use on most cars and light trucks 5/8" 18 threaded end $ LOC-855 Texas Twister Air Hammer Pulling Kit Convert your air hammer into a pneumatic slide hammer Pull axles, seals, pulleys, wheels, distributors, speed sensors Hammer bolts, studs, engine and trans mounts from the back with the J hammer Works where your slide hammer won t fit Connects to your current pullers Extend reach of tool with 20" extender $ Shown in use. Air hammer sold separately.

47 PULLERS POWER STEERING & ALTERNATOR PULLEY PULLERS OTC-4529 Power Steering & Alternator Pulley Puller & Installer Set Properly replaces pressed-on power steering and alternator pulleys on Ford, Chrysler, and late GM engines $ OTC-7185 Power Steering Pump Pulley Puller Removes power steering pulleys on most Ford, Chrysler, VW, and GM vehicles with Saginaw, Thompson, and Ford C2 and C111 power steering $ OTC-7005 Power Steering Pump Pulley Installer OTC-7830A Power Steering Pump Pulley Remover/Installer Set Works on GM, Ford and Chrysler vehicles with Saginaw, Thompson, or Ford C111 and C2 power steering pumps Fits 1-1/8", 1-1/4", 1-5/16" and 1-3/8" pulley hub diameters $ LAN-5238 Master Power Steering Pump Pulley Remover & Installer Set For press-on-type belt-driven accessory pulleys For use on GM Quad 4, GM 3.1L, Ford 4.6L engines, as well as most major domestic vehicles LIS Alternator Decoupler Pulley Tool Kit Removes and installs most alternator decoupler pulleys on the most popular vehicles in North America Works on both overriding alternator (OAD) and one-way clutch (OWC) pulleys Tools can be used while alternator is on or off the vehicle $ $ $ LIS Master Harmonic Balancer Puller Set Includes a standard harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a harmonic damper pulley puller for Chrysler, GM, Mitsubishi, and Dodge. Includes new interchangeable puller jaws for 3.6L V6 Chevrolet Camaro and Dodge 5.7L Hemi. $ OTC-4531 Harmonic Balancer Puller/Installer Set $ OTC-6667 Harmonic Balancer Puller Designed for removing damper pulleys in tight engine compartments, without removing the radiator $ HARMONIC BALANCER PULLERS TIMING PULLEY PULLER CAL-181 Timing Pulley Puller Removes drive pulleys with face grooves Adjustable legs adapt to different pulley diameters For removing pulleys with 3, 6, 9 slots Range: 42mm to 82mm $ NEW $ ATD-3059 Deluxe Steering Wheel Remover & Steering Column Service Tool Set For most domestic and import vehicles with standard or tilt/telescoping columns STEERING WHEEL PULLERS $ CL Wiper Arm Puller Set Includes 4 adjustable removers to fit almost every type of vehicle WIPER ARM PULLER October 1 to December 31,

48 PULLERS $ OTC-5190A Heavy Duty U-Joint Puller Fits all Class 7 and 8 trucks, including: Spicer 1610, 1710, 1760, 1810, 1880 Spicer SPL 140, 170, 250 Life Series Meritor 16N, 17N, 18N, 1710, RPL 20 and 25 Permalube Series UNIVERSAL JOINT PULLERS FREE! $ #OTC-5081 (S-Cam Air Brake Spring Tool) with purchase of #OTC-5190A. TGR Heavy Duty U-Joint Puller For disassembling even the most seized U-joints in minutes on virtually all Class 7 and 8 trucks and machinery Application: U-Joints with bearing cups 1.5" to 2.2" O.D. Spicer 1610, 1710, 1760, 1810, 1880 Series Spicer SPL 140, 170, & 250 Life Series Meritor (Rockwell) 16N, 17N, 18N, 1710 Series Meritor RPL 20, 25 Permalube Series YOKE PULLERS TGR Heavy Duty Yoke Puller Removes heavy duty yokes on drive shafts, transmissions and rear-end differentials without damage to yokes or other components Generates over 25,000 lbs of pulling power Application: Yokes with a bearing diameter between 1-7/8" and 2-3/16" Spicer and Meritor 1610, 1710, 1760, 1810 Series Spicer SPL 140, 170, 250 Series Meritor (Rockwell) RPL 20 and 25 Series $ BRAKE SERVICE PULLERS $ OTC Ton Capacity Brake Drum and Rotor Puller Handles large components such as brake drums, rotors, drive wheels, gears, flywheels, and pulleys Spread to 12-3/4" and 5" of reach Can be used with air tools TGR Manual Slack Adjuster Puller Safely and efficiently removes all makes and models of manual slack adjusters Can be used with a 1/2" impact tool $ OTC-5055 Manual Brake Slack Adjuster Puller for Trucks & Trailers Puller fits many manual adjuster types OTC-5056 Automatic Brake Slack Adjuster Puller for Trucks & Trailers Works on Rockwell, Haldex, Gunite, and Bendix automatic adjusters $ $ TGR Gunite/Brunner/Bendix Slack Adjuster Puller Safely and efficiently removes virtually all Gunite, Brunner and Bendix self-adjusting slack adjusters Can be used with a 1/2" impact tool $ ATD-5164 Air Brake Service Tool Kit Puller tools for slack adjusters and push-rod clevis pins used on many brake systems of Class 7 & 8 vehicles Works on manual and automatic slack adjusters $ TGR Haldex Multi Adjustable Slack Adjuster Puller Safely and efficiently removes virtually all Haldex self-adjusting slack adjusters including left offset, right offset and standard elongated arm designs from either side Can be used with a 1/2" impact tool $ JAN-30 FEB October to December 31, 2017

49 BUSHING, BEARING & SEAL SERVICE TOOLS BUSHING, BEARING & SEAL SERVICE $ OTC Piece Metric and Standard Master Bushing Driver Set Enables you to remove and install bushings ranging from 10mm to 42mm in diameter & 3/8" to 1-3/8" in diameter OTC Piece Bushing Driver Set Enables you to remove and install bushings ranging from 3/8" to 1-3/8" in diameter Includes large, medium, and small driver handles $ LIS Piece Master Pneumatic Bearing Race & Seal Driver Set For automobiles and trucks up to 1 ton (11) sizes: 1.565", 1.750", 1.965", 2.325", 2.555", 2.830", 2.995", 2.470", 4.625", 3.813", 3.180" Includes 2 handles, one for hammering and a pneumatic handle for use with an air hammer LIS Heavy Duty Truck Bearing Race and Seal Driver Set Fits most Class 8 trucks and trailers and some medium duty trucks Size range: 3-43/64" to 6" $ $ CAL-506 Adjustable Bearing Race and Seal Driver All in on design eliminates need for different size adapters Jaws quickly adjust to accommodate bearing races and seals from 0.833" " (21mm 92mm) $ LIS Truck Hub Seal Installer Kit Fits most Class 7 and 8 trucks and trailers and some medium duty trucks Size range: 4-13/16" to 6" $ LIS Piece Bearing Race and Seal Driver Set (9) adapter sizes: 1.565", 1.750", 1.965", 2.325", 2.470", 2.555", 2.830", 2.995", 3.180" $ Universal Bearing Race & Seal Installers Part # Description Price ATD-8626 ATD-8627 Small.374"-1.968" (9.5-50mm) Large.708"-3.543" (18-90mm) ATD Piece Bearing Race and Seal Driver Set (9) adapter sizes: 1.565", 1.750", 1.965", 2.325", 2.470", 2.555", 2.830", 2.995", 3.180" MAY Piece Bearing Race Punch Set Contains: 7/16" x 6", 1/2" x 10", 9/16" x 14" and 5/8" x 20" bearing race punches with specifically designed, unique, oval tips $ $ $ FREE! #MAY (5 Piece Pinch Punch Kit) with purchase of #MAY $ $ $ OTC-7180 Universal Bearing Cup Installer Installs wheel-bearing cups in a wide range of heavy-duty axles Works on axles from 11,000 to 50,000 lbs capacity Adjusts to fit 3-5/8" to 6-1/2" O.D. bearing cups $ OTC-4245 Freightliner Rear Suspension Bushing Tool Master Kit with Air/Hydraulic Pump Removes FAS II Airliner Freightliner Rear Suspension bushings, Neway AD Series Truck and Tractor suspension bushings in a fraction of the time of traditional methods Saves on average 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing OTC-4244 Freightliner Rear Suspension Bushing Tool October 1 to December 31,

50 BUSHING, BEARING & SEAL SERVICE BUSHING, BEARING & SEAL SERVICE TOOLS Honda and Acura Front Lower Control Arm Bushing Remover and Installer 9CL Small Big socket: 68mm I.D.; 76mm O.D. Small socket: 56mm I.D.; 64mm O.D. Spindle: M14 x 2.0P Length: 250mm 9CL Large Big socket: 76mm I.D.; 84mm O.D. Small socket: 66mm I.D.; 73mm O.D. Spindle: M14 x 2.0P Length: 250mm $ $ MUK Universal Bushing & Bearing Extractor and Installer COMPLETE Kit Includes: 10 sleeves, 3 impact spindles and 4 discs $ $ MUK BASIC Universal Bushing & Bearing Extractor and Installer BASIC Kit Includes: 10 sleeves, 1 impact spindle Basic kit is ideal for use in combination with the #MUK by stacking the sleeves $ AST Master Front Wheel Drive Bearing Adapter Set Change front wheel bearings without having to remove the steering knuckle or strut assembly Designed for 4WD/AWD trucks and front wheel drive cars $ ATD-8625 Front Wheel Drive Bearing Adapter Kit Change front wheel bearings without having to remove the steering knuckle or strut assembly Eliminates the need for front end alignment after service work is completed For use with front wheel drive cars and light trucks MUK Universal Bushing & Bearing Extractor and Installer Kit Works on a large variety of bushings. Also works on ball joints. Range: 34mm - 72mm I.D. $ MUK /460 Universal Bushing & Bearing Extractor and Installer Kit with C-Clamp Includes numbers #MUK and #MUK $ OTC-6575 Wheel Hub and Bearing Service Kit No need to remove the steering components or knuckle. Eliminates unnecessary alignments or the use of a shop press. The puller is specifically designed to apply maximum force with minimal effort from an impact gun Coverage up to 2009 model year Includes tie rod/ball joint tool and 2 Ford axle installers JAN-30 FEB October to December 31, 2017 $ MUK Universal Bushing & Bearing Extractor and Installer Kit Works on vehicles and heavy duty trucks Includes (2) impact spindles Range: 74mm - 112mm I.D. $ MUK Drop Forged Oversized C-Clamp with Square Thread Impact Spindle For use with #MUK For use with an impact wrench Size: 13" x 6-3/4" $