Posi-Strip. Posi-Strip. Posi-Strip Punch Stripping System. Cost-Effective Alternative to Custom Spring Strippers PUNCH STRIPPING SYSTEM. New!

Size: px

Start display at page:

Download "Posi-Strip. Posi-Strip. Posi-Strip Punch Stripping System. Cost-Effective Alternative to Custom Spring Strippers PUNCH STRIPPING SYSTEM. New!"

Archibald Williams
6 years ago
Views:

1 New! Patent Pending. Please Order rom: Clark & Osborne, LLP 6617 erguson Avenue Indianapolis, IN Phone AX These easy-to-install self-contained strippers attach to standard catalog retainers with multiple spring pressure options. The compact robust design is ideal for newer high strength steels. Cost-Effective Alternative to Custom pring trippers PUNCH TRIPPING YTEM Posi-trip Posi-trip lat or Contoured urface PUNCH TRIPPING YTEM Posi-trip Punch tripping ystem Durable elf-contained Global leader in providing fabrication and stamping solutions

2 2 Posi-trip eatures and Benefits Dayton s Posi-trip Punch tripping ystem is an ideal solution for holding material in compact spaces. The compact, all-in-one design is a lower cost alternative to custom built steel spring strippers. Reduce setup and design time with an easily configured stripper. With fewer assembly components, the self contained unit minimizes the risk of lost items or tooling damage caused by displaced items. A single product code gives you the stripper size, punch shape shape and force you need. The standardized catalog product code can be expanded to a custom contour defined in your CAD file, or you can order the stripper for your own in-house contour machining. This versatile product can be ordered as a standard catalog item, with no need to order as a special item. Posi-trip stripper units are easily paired to industrystandard Dayton punch retainers and can just as easily replace expensive strippers from other manufacturers. Backing Plug Compression pring Bronze tripper eatures 11 standard shapes, 77 classified shapes, and blank units available as standards. our spring pressures available: Extra Light duty, Light duty, Medium duty, and Heavy duty No special tools required for disassembly standard spanner wrench is ideal tandard design can be used up to a 15 pierce angle. Compact/Extended Reach design is ideal for smaller spaces. Body Benefits Low cost alternative to expensive custom-built spring strippers One piece self-contained unit No loose parts Compact but durable design Can be used in tight spaces its industry-standard Dayton ball lock and headed retainers: BRT, BRTB, BRTL, BRTBL, CRT, ART, ART, HRT, HRTB, HRTL, HRTBL, LRT, VRT, & VRT CAD Data Ready to place instantly in your design, CAD data for Posi-trip Punch trippers is available at:

Technical Information 3 Design pecify punch type and point shape for each unique Posi-trip application. The bronze stripper is manufactured for 0.3 mm /.012 inch clearance per side.

Each Posi-trip Punch tripper comes with a standard Medium pressure blue spring. trippers can also be ordered with Extra Light, Light, and Heavy Duty pressure options.

3 Technical Information 3 Design pecify punch type and point shape for each unique Posi-trip application. The bronze stripper is manufactured for 0.3 mm /.012 inch clearance per side. The easy-to-order product code defines the stripper s body length, bronze insert, and spring type. Custom contoured bronze inserts can be defined with a supplied CAD file or drawing/print. Each Posi-trip Punch tripper comes with a standard Medium pressure blue spring. trippers can also be ordered with Extra Light, Light, and Heavy Duty pressure options. The backing plug is used to locate the Posi-trip unit with the punch shank. The designed length is critical. Altering the unit from the published dimension may increase the chance of over-stroking. Over-stroking the unit could lead to premature or catastrophic failure. Maximum defection is specified on each Posi-trip body. Compliance with this value is imperative to successful operation. Installation The Backing Plug utilizes two small holes to assist in the installation and removal. The unit can be easily disassembled with a common spanner wrench. If a spring shifts off-center during removal of the backing plug, realign by lightly tapping the stripper on the punch. Use the provided socket head cap screw to install the Posi-trip Punch tripper to the retainer. The socket head cap screw fits in an elliptical mounting hole for flexibility when fastening to the retainer. or proper fitting to the retainer, ensure that the Backing Plug is recessed below the surface of the stripper. Damage will occur if the backing plug is not recessed. Recess Backing Plug Below urface Custom Contour Bronze Insert The bronze insert can be manufactured to contours specified in your CAD file or drawing/print. The contour can be up to 3 mm or.118 inches. panner Wrench Posi-trip Punch trippers are designed to be easily disassembled with common tools like a spanner wrench. Replacement prings Catalog Number Each Posi-trip Punch tripper comes ready-assembled with a spring. To order replacement springs or select from optional stripping forces, see pages

4 4 Ball Lock Metric or True Position Retainers Heavy Duty BT_J_ or BRT, BRTB, BRTL, & BRTBL heavy duty retainers BT_E_ Compact Extended Reach Light Duty CT_J_ or CRT light duty retainers CT_E_ Compact Extended Reach (BRT) 32.0 (CRT) U D 41.0 (BRT) 32.0 (CRT) B D 1 Bronze Diameter A pecify bronze length L to add 3 mm for in-house contour machining. pecify bronze length L to add 3 mm for in-house contour machining. HOW TO ORDER Example: BTOJM 16 R100 P=12.5 W=8.5 P89 30 CTXEM 32 L90 P=20.0 tripper Point hape Reach pring Type Punch Diameter Bronze Length Punch Length Punch Point Dimensions =Extra Light BT, CT C, E, H, J, K, L, N, E=Extended L=Light 10, 13, 16, 20, 25, R=* O, R, V, X, Y, Z J= M=Medium* 32, 40 L=3mm Longer 71, 80, 90, 100 P, W, etc. H=Heavy C=Custom Contour *tandard Custom Contour up to 3mm per submitted CAD file. X O R L. 5 ± pecify K J H If ball seat on punch is at an angle other than standard, specify stripper alteration P89 with same angle. No additional charge for P89. Point larger than shank is not available. tripper Area Bronze stripper clearance per side is 0.3 mm /.012 in. N V Y Z E C Views are reflected. Additional shapes available upon request. ee punch catalog for complete selection of classified shapes. G R= 2 (Blank) (Classified hape Number) Paired retainers and punches are ordered as separate line items.

5 Ball Lock Metric or True Position Retainers 5 Heavy Duty Maximum pring Travel from * BT_J_ 10 _ BT_J_ 10 _ BT_J_ 10 _ BT_J_ 13 _ BT_J_ 13 _ BT_J_ 13 _ BT_J_ 16 _ BT_J_ 16 _ BT_J_ 16 _ BT_J_ 20 _ BT_J_ 20 _ BT_J_ 20 _ BT_J_ 25 _ BT_J_ 25 _ BT_J_ 25 _ BT_J_ 32 _ BT_J_ 32 _ BT_J_ 32 _ BT_J_ 40 _ BT_J_ 40 _ BT_J_ 40 _ BT_E_ 10 _ BT_E_ 10 _ BT_E_ 13 _ BT_E_ 13 _ BT_E_ 16 _ BT_E_ 16 _ BT_E_ 20 _ BT_E_ 20 _ BT_E_ 25 _ BT_E_ 25 _ BT_E_ 32 _ BT_E_ 32 _ BT_E_ 40 _ BT_E_ 40 _ Light Duty Maximum pring Travel from * CT_J_ 10 _ CT_J_ 10 _ CT_J_ 10 _ CT_J_ 13 _ CT_J_ 13 _ CT_J_ 13 _ CT_J_ 16 _ CT_J_ 16 _ CT_J_ 16 _ CT_J_ 20 _ CT_J_ 20 _ CT_J_ 20 _ CT_J_ 25 _ CT_J_ 25 _ CT_J_ 25 _ CT_J_ 32 _ CT_J_ 32 _ CT_J_ 32 _ CT_E_ 10 _ CT_E_ 10 _ CT_E_ 13 _ CT_E_ 13 _ CT_E_ 16 _ CT_E_ 16 _ CT_E_ 20 _ CT_E_ 20 _ CT_E_ 25 _ CT_E_ 25 _ CT_E_ 32 _ CT_E_ 32 _ * Medium pressure blue spring (M) is default. or stripping force, see page 10.

6 6 Ball Lock Inch or True Position Retainers Heavy Duty HT_J_ or HRT, HRTB, HRTL, & HRTBL heavy duty retainers HT_E_ Compact Extended Reach Light Duty LT_J_ or LRT light duty retainers LT_E_ Compact Extended Reach (HRT) (LRT) (HRT) (LRT) U D B D 1 Bronze Diameter A pecify bronze length L to add 3 mm for in-house contour machining. pecify bronze length L to add 3 mm for in-house contour machining. HOW TO ORDER Example: HTXJM 100 R350 P=.75 LTRJM 75 R325 P=.52 W=.35 P89 45 tripper Point hape Reach pring Type Punch Diameter Bronze Length Punch Length Punch Point Dimensions =Extra Light HT, LT C, E, H, J, K, L, N, E=Extended L=Light.37,.50,.62,.75, R=* O, R, V, X, Y, Z J= M=Medium* 1.00, 1.25 L=.118 in Longer 3.00, 3.25, 3.50, H=Heavy C=Custom Contour 4.00 P, W, etc. *tandard Custom Contour up to.118 in per submitted CAD file. X O R L. 5 ± pecify K J H If ball seat on punch is at an angle other than standard, specify stripper alteration P89 with same angle. No additional charge for P89. Point larger than shank is not available. tripper Area Bronze stripper clearance per side is 0.3 mm /.012 in. N V Y Z E C Views are reflected. Additional shapes available upon request. ee punch catalog for complete selection of classified shapes. G R= 2 (Blank) (Classified hape Number) Paired retainers and punches are ordered as separate line items.

7 Ball Lock Inch or True Position Retainers 7 Heavy Duty Maximum pring Travel from * HT_J_ 37 _ HT_J_ 37 _ HT_J_ 37 _ HT_J_ 50 _ HT_J_ 50 _ HT_J_ 50 _ HT_J_ 62 _ HT_J_ 62 _ HT_J_ 62 _ HT_J_ 75 _ HT_J_ 75 _ HT_J_ 75 _ HT_J_ 87 _ HT_J_ 87 _ HT_J_ 87 _ HT_J_ 100 _ HT_J_ 100 _ HT_J_ 100 _ HT_J_ 125 _ HT_J_ 125 _ HT_J_ 125 _ HT_E_ 37 _ HT_E_ 37 _ HT_E_ 50 _ HT_E_ 50 _ HT_E_ 62 _ HT_E_ 62 _ HT_E_ 75 _ HT_E_ 75 _ HT_E_ 87 _ HT_E_ 87 _ HT_E_ 100 _ HT_E_ 100 _ HT_E_ 125 _ HT_E_ 125 _ Light Duty Maximum pring Travel from * LT_J_ 37 _ LT_J_ 37 _ LT_J_ 37 _ LT_J_ 50 _ LT_J_ 50 _ LT_J_ 50 _ LT_J_ 62 _ LT_J_ 62 _ LT_J_ 62 _ LT_J_ 75 _ LT_J_ 75 _ LT_J_ 75 _ LT_J_ 87_ LT_J_ 87 _ LT_J_ 87 _ LT_J_ 100 _ LT_J_ 100 _ LT_J_ 100 _ LT_E_ 37 _ LT_E_ 37 _ LT_E_ 50 _ LT_E_ 50 _ LT_E_ 62 _ LT_E_ 62 _ LT_E_ 75 _ LT_E_ 75 _ LT_E_ 87 _ LT_E_ 87 _ LT_E_ 100 _ LT_E_ 100 _ * Medium pressure blue spring (M) is default. or stripping force, see page 11.

8 8 Headed Metric / Inch or True Location Retainers Metric AT_J_ or ART & ART Press it metric retainers AT_E_ Compact Extended Reach Inch VT_J_ or VRT & VRT Versatile inch retainers VT_E_ Compact Extended Reach 5.0 mm.188 in ** 5.0 mm.188 in ** 25 mm 1.00 in 25 mm 1.00 in U D 10.0 mm 0.39 in B D 1 Bronze Diameter 10.0 mm 0.39 in A pecify bronze length L to add 3 mm or.118 in for in-house contour machining. pecify bronze length L to add 3 mm or.118 in for in-house contour machining. HOW TO ORDER Example: ATJJH 16 R90 P=10.5 W=7.3 P89 90 VTELM 100 L350 tripper Point hape Reach pring Type Punch Diameter Bronze Length Punch Length Punch Point Dimensions AT, VT C, E, H, J, K, L, N, O, R, V, X, Y, Z E=Extended J= =Extra Light L=Light M=Medium* H=Heavy *tandard 10, 13, 16, 20, 25, 32 mm.37,.50,.62,.75, 1.00, 1.25 in R=* L=3mm or.118 in Longer C=Custom Contour 71, 80, 90 mm 3.00, 3.25, 3.50 in P, W, etc. Custom Contour up to 3mm or.118 in per submitted CAD file. X O R L. 5 ± pecify K J H If key flat on punch is at an angle other than standard, specify stripper alteration P89 with same angle. No additional charge for P89. Point larger than shank is not available. tripper Area Bronze stripper clearance per side is 0.3 mm /.012 in. N V Y Z E C Views are reflected. Additional shapes available upon request. ee punch catalog for complete selection of classified shapes. G R= 2 (Blank) (Classified hape Number) Paired retainers and punches are ordered as separate line items.

9 Headed Metric / Inch or True Location Retainers 9 Press it Metric Maximum pring Travel from * AT_J_ 10 _ AT_J_ 10 _ AT_J_ 10 _ AT_J_ 13 _ AT_J_ 13 _ AT_J_ 13 _ AT_J_ 16 _ AT_J_ 16 _ AT_J_ 16 _ AT_J_ 20 _ AT_J_ 20 _ AT_J_ 20 _ AT_J_ 25 _ AT_J_ 25 _ AT_J_ 25 _ AT_J_ 32 _ AT_J_ 32 _ AT_J_ 32 _ AT_E_ 10 _ AT_E_ 10 _ AT_E_ 13 _ AT_E_ 13 _ AT_E_ 16 _ AT_E_ 16 _ AT_E_ 20 _ AT_E_ 20 _ AT_E_ 25 _ AT_E_ 25 _ AT_E_ 32 _ AT_E_ 32 _ Versatile Inch Maximum pring Travel from * VT_J_ 37 _ VT_J_ 37 _ VT_J_ 37 _ VT_J_ 50 _ VT_J_ 50 _ VT_J_ 50 _ VT_J_ 62 _ VT_J_ 62 _ VT_J_ 62 _ VT_J_ 75 _ VT_J_ 75 _ VT_J_ 75 _ VT_J_ 100 _ VT_J_ 100 _ VT_J_ 100 _ VT_J_ 125 _ VT_J_ 125 _ VT_J_ 125 _ VT_E_ 37 _ VT_E_ 37 _ VT_E_ 50 _ VT_E_ 50 _ VT_E_ 62 _ VT_E_ 62 _ VT_E_ 75 _ VT_E_ 75 _ VT_E_ 100 _ VT_E_ 100 _ VT_E_ 125 _ VT_E_ 125 _ * Medium pressure blue spring (M) is default. or stripping force, see pages

10 10 Metric pring tripping orce election or BT_, CT_ & AT_ tripping Units Heavy Duty Ball Lock tripping Units Extra Light tripping orce Light Duty tripping orce Medium Duty tripping orce Heavy Duty tripping orce tripper Duty pring Rate pring Product pring pring Product Product Code Product Code N/mm Max Defl. Rate Code N/mm Max Defl. Rate Max Rate Max Product Code N/mm Defl. Code N/mm Defl. BT_J_ 10 _80 NPD20-25LD BT_J_ 10 _90 NPD20-25LD BT_J_ 10 _100 NPD20-32LD BT_J_ 13 _80 NPD25-25LD BT_J_ 13 _90 NPD25-25LD BT_J_ 13 _100 NPD25-32LD BT_J_ 16 _80 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED BT_J_ 16 _90 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED BT_J_ 16 _100 NPD32-32LD NPD32-32MD NPD32-32HD NPD32-32ED BT_J_ 20 _80 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED BT_J_ 20 _90 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED BT_J_ 20 _100 NPD38-32LD NPD38-32MD NPD38-32HD NPD38-32ED BT_J_ 25 _80 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED BT_J_ 25 _90 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED BT_J_ 25 _100 NPD50-32LD NPD50-32MD NPD50-32HD NPD50-32ED BT_J_ 32 _80 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED BT_J_ 32 _90 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED BT_J_ 32 _100 NPD55-32LD NPD55-32MD NPD55-32HD NPD55-32ED BT_J_ 40 _80 NPD64-25LD NPD64-25MD NPD64-25HD NPD64-25ED BT_J_ 40 _90 NPD64-25LD NPD64-25MD NPD64-25HD NPD64-25ED BT_J_ 40 _100 NPD64-32LD NPD64-32MD NPD64-32HD NPD64-32ED BT_E_ 10 _90 BT_E_ 10 _100 NPD20-25LD BT_E_ 13 _90 BT_E_ 13 _100 NPD25-25LD BT_E_ 16 _90 BT_E_ 16 _100 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED BT_E_ 20 _90 BT_E_ 20 _100 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED BT_E_ 25 _90 BT_E_ 25 _100 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED BT_E_ 32 _90 BT_E_ 32 _100 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED BT_E_ 40 _90 BT_E_ 40 _100 NPD64-25LD NPD64-25MD NPD64-25HD NPD64-25ED Light Duty Ball Lock & Press it Headed tripping Units Extra Light tripping orce Light Duty tripping orce Medium Duty tripping orce Heavy Duty tripping orce tripper Duty pring Rate pring Product pring pring Product Product Code Product Code N/mm Max Defl. Rate Code N/mm Max Defl. Rate Max Rate Max Product Code N/mm Defl. Code N/mm Defl. CT_J_ / AT_J_ 10 _71 NPD20-25LD CT_J_ / AT_J_ 10 _80 NPD20-25LD CT_J_ / AT_J_ 10 _90 NPD20-32LD CT_J_ / AT_J_ 13 _71 NPD25-25LD CT_J_ / AT_J_ 13 _80 NPD25-25LD CT_J_ / AT_J_ 13 _90 NPD25-32LD CT_J_ / AT_J_ 16 _71 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED CT_J_ / AT_J_ 16 _80 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED CT_J_ / AT_J_ 16 _90 NPD32-32LD NPD32-32MD NPD32-32HD NPD32-32ED CT_J_ / AT_J_ 20 _71 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED CT_J_ / AT_J_ 20 _80 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED CT_J_ / AT_J_ 20 _90 NPD38-32LD NPD38-32MD NPD38-32HD NPD38-32ED CT_J_ / AT_J_ 25 _71 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED CT_J_ / AT_J_ 25 _80 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED CT_J_ / AT_J_ 25 _90 NPD50-32LD NPD50-32MD NPD50-32HD NPD50-32ED CT_J_ / AT_J_ 32 _71 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED CT_J_ / AT_J_ 32 _80 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED CT_J_ / AT_J_ 32 _90 NPD55-32LD NPD55-32MD NPD55-32HD NPD55-32ED CT_E_ / AT_E_ 10 _80 CT_E_ / AT_E_ 10 _90 NPD20-25LD CT_E_ / AT_E_ 13 _80 CT_E_ / AT_E_ 13 _90 NPD25-25LD CT_E_ / AT_E_ 16 _80 CT_E_ / AT_E_ 16 _90 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED CT_E_ / AT_E_ 20 _80 CT_E_ / AT_E_ 20 _90 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED CT_E_ / AT_E_ 25 _80 CT_E_ / AT_E_ 25 _90 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED CT_E_ / AT_E_ 32 _80 CT_E_ / AT_E_ 32 _90 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED

11 Inch pring tripping orce election or HT_, LT_ & VT_ tripping Units Heavy Duty Ball Lock tripping Units Extra Light tripping orce Light Duty tripping orce Medium Duty tripping orce Heavy Duty tripping orce tripper Duty pring Rate pring Product Rate pring Rate Max pring Product Rate Max Product Code Max Defl. Max Defl. Product Code lbs/.1 in Code lbs/.1 in Product Code lbs/.1 in Defl. Code lbs/.1 in Defl. HT_J_ 37 _325 NPD20-25LD HT_J_ 37 _350 NPD20-25LD HT_J_ 37 _400 NPD20-32LD HT_J_ 50 _325 NPD25-25LD HT_J_ 50 _350 NPD25-25LD HT_J_ 50 _400 NPD25-32LD HT_J_ 62 _325 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED HT_J_ 62 _350 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED HT_J_ 62 _400 NPD32-32LD NPD32-32MD NPD32-32HD NPD32-32ED HT_J_ 75 _325 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED HT_J_ 75 _350 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED HT_J_ 75 _400 NPD38-32LD NPD38-32MD NPD38-32HD NPD38-32ED HT_J_ 87 _325 NPD41-25LD NPD41-25MD NPD41-25HD NPD41-25ED HT_J_ 87 _350 NPD41-25LD NPD41-25MD NPD41-25HD NPD41-25ED HT_J_ 87 _400 NPD41-32LD NPD41-32MD NPD41-32HD NPD41-32ED HT_J_ 100 _325 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED HT_J_ 100 _350 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED HT_J_ 100 _400 NPD50-32LD NPD50-32MD NPD50-32HD NPD50-32ED HT_J_ 125 _325 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED HT_J_ 125 _350 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED HT_J_ 125 _400 NPD55-32LD NPD55-32MD NPD55-32HD NPD55-32ED HT_E_ 37 _350 HT_E_ 37 _400 NPD20-25LD HT_E_ 50 _350 HT_E_ 50 _400 NPD25-25LD HT_E_ 62 _350 HT_E_ 62 _400 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED HT_E_ 75 _350 HT_E_ 75 _400 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED HT_E_ 87 _350 HT_E_ 87 _400 NPD41-25LD NPD41-25MD NPD41-25HD NPD41-25ED HT_E_ 100 _350 HT_E_ 100 _400 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED HT_E_ 125 _350 HT_E_ 125 _400 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED Light Duty Ball Lock & Versatile Headed tripping Units Extra Light tripping orce Light Duty tripping orce Medium Duty tripping orce Heavy Duty tripping orce tripper Duty pring Rate pring Product Rate pring Rate Max pring Product Rate Max Product Code Max Defl. Max Defl. Product Code lbs/.1 in Code lbs/.1 in Product Code lbs/.1 in Defl. Code lbs/.1 in Defl. LT_J_ / VT_J_ 37 _300 NPD20-25LD LT_J_ / VT_J_ 37 _325 NPD20-25LD LT_J_ / VT_J_ 37 _350 NPD20-32LD LT_J_ / VT_J_ 50 _300 NPD25-25LD LT_J_ / VT_J_ 50 _325 NPD25-25LD LT_J_ / VT_J_ 50 _350 NPD25-32LD LT_J_ / VT_J_ 62 _300 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED LT_J_ / VT_J_ 62 _325 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED LT_J_ / VT_J_ 62 _350 NPD32-32LD NPD32-32MD NPD32-32HD NPD32-32ED LT_J_ / VT_J_ 75 _300 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED LT_J_ / VT_J_ 75 _325 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED LT_J_ / VT_J_ 75 _350 NPD38-32LD NPD38-32MD NPD38-32HD NPD38-32ED LT_J_ 87_ 300 NPD41-25LD NPD41-25MD NPD41-25HD NPD41-25ED LT_J_ 87 _325 NPD41-25LD NPD41-25MD NPD41-25HD NPD41-25ED LT_J_ 87 _350 NPD41-32LD NPD41-32MD NPD41-32HD NPD41-32ED LT_J_ / VT_J_ 100 _300 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED LT_J_ / VT_J_ 100 _325 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED LT_J_ / VT_J_ 100 _350 NPD50-32LD NPD50-32MD NPD50-32HD NPD50-32ED LT_J_ / VT_J_ 125 _300 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED LT_J_ / VT_J_ 125 _325 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED LT_J_ / VT_J_ 125 _350 NPD55-32LD NPD55-32MD NPD55-32HD NPD55-32ED LT_E_ / VT_E_ 37 _325 LT_E_ / VT_E_ 37 _350 NPD20-25LD LT_E_ / VT_E_ 50 _325 LT_E_ / VT_E_ 50 _350 NPD25-25LD LT_E_ / VT_E_ 62 _325 LT_E_ / VT_E_ 62 _350 NPD32-25LD NPD32-25MD NPD32-25HD NPD32-25ED LT_E_ / VT_E_ 75 _325 LT_E_ / VT_E_ 75 _350 NPD38-25LD NPD38-25MD NPD38-25HD NPD38-25ED LT_E_ 87 _325 LT_E_ 87 _350 NPD41-25LD NPD41-25MD NPD41-25HD NPD41-25ED LT_E_ / VT_E_ 100 _325 LT_E_ / VT_E_ 100 _350 NPD50-25LD NPD50-25MD NPD50-25HD NPD50-25ED LT_E_ / VT_E_ 125 _325 LT_E_ / VT_E_ 125 _350 NPD55-25LD NPD55-25MD NPD55-25HD NPD55-25ED

Posi-Strip. Posi-Strip Punch Stripping System. Cost-Effective Alternative to Custom Spring Strippers PUNCH STRIPPING SYSTEM. New!

Posi-Strip. Posi-Strip Punch Stripping System. Cost-Effective Alternative to Custom Spring Strippers PUNCH STRIPPING SYSTEM. New! Durable Self-contained Posi-Strip Punch Stripping System Flat or Contoured Surface New! Patent Pending. These easy-to-install self-contained strippers attach to standard catalog retainers with multiple