Solenoid-driven Diaphragm Metering Pump
|
|
- Easter Potter
- 6 years ago
- Views:
Transcription
1 Solenoid-driven Metering Pump
2 Features Equipped with New Functions for Higher Safety, Superior Eco-friendly Performance, and Optimal Ease of Use Higher Safety Three types of safety functions that realize higher rank risk management Control functions SAFE mode for preventing abnormal pressure buildup The liquid transfer force is controlled during no-discharge operation to prevent pressure buildup. Relief valve function for releasing abnormal pressure When the pressure exceeds the setting value, the relief valve operates automatically. Alarm function for notifying abnormal pressure When abnormal pressure builds up due to clogging of the pipes or while the discharge valve is closed, an alarm is emitted to warn this condition. Specifications To use the SAFE mode, set the stroke length to 100%. The SAFE mode is not available for -200, boiler type and high-pressure type. The function is disabled at the factory default setting. Standard type pump discharge pressure: 0.7MPa. Boiler-type pump discharge pressure: 1.5MPa. The Relief valve function cannot be selected for SUS type, high-viscosity type, and high-pressure type pumps. Safety function selection flow When the alarm function is used together with the SAFE mode, an alarm is emitted for pressure lower than the normal pressure. This function is disabled at the factory default setting. A separate signal cable is necessary to use the alarm function. Sodium hypochlorite injection pumps Prevents abnormal pressure buildup Displays and outputs an alarm when trouble has occurred. Requires a discharge pressure of 0.7MPa minimum SAFE mode SAFE mode Relief valve function Alarm function Alarm function 1
3 Function correspondence table General chemical model Relief valve function SAFE mode Alarm function ECO mode R/60R/100R /60/100 High pressure 1.0MPa Low pressure 0.1MPa /M/T 200 High-viscosity Boiler High-pressure 60/100 R Superior Eco-friendly Performance Optimal Ease of Use Operability Simple key operations and user interface enable intuitive operation. Flexible installation methods The head can be moved in three directions. 1 cycle 1 cycle 1 cycle 1 cycle Up to 55% reduction of power consumption Wide power supply range Operation can be performed using a voltage between AC100 and 240V (±10%). High-brightness display Outdoor use DCL/DCLM/DCLT CL/CLM/CLT Sodium hypochlorite R/60R/100R /60/100 A circle () is indicated for the corresponding function that can be set. A cross ( ) is indicated for the corresponding function that must not be set even though it istechnically possible. Automatically cuts power-on time in accordance with the discharge pressure The power of conventional pumps was always turned on for a specific period regardless of the discharge pressure. The ECO mode of pumps always monitors operation conditions and automatically shortens the power-on time during low-pressure operation in order to reduce power consumption. The high-brightness LED is clearly visible even in low-light environments. Power-on time to solenoid Water-&Dust-proof structure IEC standard: IP65 or equivalent Power consumption reduction example: -60 model Operating pressure: 1.0MPa Number of strokes: 0 strokes/min. Average power consumption: 18W Operating pressure: 0.1MPa Number of strokes: 0 strokes/min. Average power consumption: 8W Easy maintenance The liquid-end parts are easy to disassemble and replace by simply detaching four bolts. Wide variety of liquid-end components For boiler For highpressure liquids Stainless steel For high-viscosity liquids Acrylic for sodium hypochlorite Features Control functions Specifications Sodium hypochlorite injection pumps 2
4 Features Wide-ranging Control Functions Realize Ideal Chemical Injection Systems Common functions M T Control functions Manual operation Strokes/minute control You can set the range between 1 and 0 strokes per minute in 1-stroke units. Synchronous pulse control A single pulse can be output for a single pump operation. The output pulse can be input to a second pump to perform synchronous operation. Discharge volume control ( only) You can set the range between 0.1 and the maximum discharge volume in 0.1mL-per minute units. Polyaluminum chloride Flow meter (pulse/analog) Sodium hydroxide Sodium hypochlorite External operation & stop control The pump can be turned on and off using a input signal from an external device. Alarm output When the pump is used in combination with a level meter and checker, an alarm is output during abnormal pressure buildup. Alarm Relief valve side pipe (air purge hose) Level meter Chemical liquid tank Example: For a single stroke (Pump A), controls such as three strokes (Pump B) and 2 strokes (Pump C) can be enabled. Specifications Pulse input-based proportional control Pulse frequency-division The pump performs a single injection operation for 'n' times of input pulse signals. Setting range: n = 1 to 999 Setting example: n = 3 Signal Pulse frequency-magnification T The pump performs the injection operation 'n' times for a single input pulse signal. Setting range: n = 1 to 999 Setting example: n = 3 Signal *1 *1 For T, this is available only when using timer function. Pump operation Pump operation Sodium hypochlorite injection pumps Analog input signal-based proportional control Automatic operation The pump operates for a specified number of strokes in the range of 0 to 0 strokes per minute in accordance with the setting value (set point, proportional band), upon receiving an analog input signal (4 to 20mA). (1) Set point (SP) setting SP setting range: 0 to 100% Discharge volume Fixed PB, variable SP M (2) Proportional band (PB) setting PB setting range: -999 to 999% Fixed SP, variable PB 3
5 4Features Control functions Specifications Sodium hypochlorite injection pumps Input signal Output signal Control Digital Number of ports Analog Type Number of ports Digital Type Manual operation Number of strokes Discharge volume control Pulse proportional control Analog proportional control Timer control External operation & stop input signal (pulse type) Stop signal, pulse signal Sync pulse, alarm output 0.1 to maximum discharge volume (Enables setting in 0.1mL/minute units) M (analog type) Stop signal, pulse signal Sync pulse, alarm output 1 to 0 (Enables setting in 1-stroke units) T (timer type) Stop signal, pulse signal Sync pulse, alarm output Timer control Interval mode Pump operation can be turned on and off in accordance with the setting of the timer. You can set any ON and OFF period for one pattern each in the range of 1 to 9999 minutes. Setting example: ON period: 5 minutes OFF period: 3 minutes 5 minutes 5 minutes 5 minutes DAY mode T The pump operates automatically everyday using the same ON and OFF timing that is set. You can set up to nine program patterns within the range of 0:00 to 24:00 in 1-minute unit. DAY mode cannot be used together with the WEEK mode. Setting example: ON time: OFF time: 3 minutes 3 minutes 3 minutes When both interval mode and pulse operation are simultaneously set, the pump will operate in accordance with pulse frequency-division or pulse frequency-magnification setting within the ON time set for the DAY mode and interval mode. WEEK mode The pump automatically operates every week at the same ON and OFF time being set for the day of the week. You can set one program pattern for each day of the week. You can set the ON time from 0:00 to 24:00 and OFF time within the range 0:00 to 48:00 in 1-minute unit. WEEK mode cannot be used together with DAY mode. Setting example Mon Tue Wed Thu Fri Sat Sun Mon Tue ON time Mon Time that can be set OFF time for each program ON time Pump operation time Tue OFF time ON time Wed OFF time ON time Thu OFF time ON time Fri OFF time ON time Sat OFF time ON time Sun OFF time When the pulse proportional control operation is set, the pump will operate in accordance with the pulse frequency-division or pulse frequency-magnification set for this operation. When both interval mode and pulse proportional control operation are simultaneously set, the pump will operate in accordance with pulse frequency-division or pulse frequency-magnification set for this operation.*1 *1 The number of strokes will be the value set in each program. The following combination of functions can also be used besides the abovementioned combination. Interval mode External operation control DAY mode External operation control DAY mode Pulse proportional control Interval mode Pulse proportional control External stop control WEEK mode External stop control WEEK mode
6 Application examples Simple water purifying treatment Elevated water tank Control panel Features DC420mA Distributing reservoir Distribution Control panel chlorine indicator chlorine indicator Power supply chlorine indicator Sampling valve Feedwater Level switch Water lifting pump Circulation pump Elevated water tank Chemical injection system PTS Sampling valve Liquid Water-storage tank transfer pump Circulation pump Sodium hypochlorite storage tank Water receiving tank Control functions Circulation type bathtub Hair catcher Bathtub Circulation pump Power supply Filter or cartridge strainer Sampling valve DC420mA Pressure reducing valve Filter Heat exchanger FR recorder Power supply Level switch Sodium hypochlorite storage tank Swimming pool Swimming pool Balancing tank C-type holder Hair catcher Filter or cartridge strainer Circulation pump Sampling valve Filter DC420mA FR recorder Heat exchanger Chemical injection system PTS Power supply Chemical injection for boiler Water treatment of cooling tower Specifications Chemical injection system PTS Circulation pump Boiler Cooling tower Waste water Building Circulation pump Heat exchanger Sodium hypochlorite injection pumps Neutralization of ph in waste water Chemical injection system PTS Raw water Control panel ph recorder ph meter Mixer Neutralization tank Tank with ph recording instrument Discharge Dechlorination treatment of RO film process Sodium hypochlorite storage tank Industrial water Filter Filter Primary treatment Control panel High-pressure pump Dechlorination treatment Dechlorination solvent tank Static mixer Control panel Waterstorage tank Static mixer 5
7 General chemical model High-viscosity model () type Discharge side joint type Discharge side joint SUS type Valve stopper /M/T VTCE EPDM EPDM VTCF Fluoro rubber Special fluoro rubber /M/T FTCE FTCF FTCT EPDM Fluoro rubber Special fluoro rubber Packing EPDM PP Special fluoro rubber PP /M/T 6TCT Valve stopper SUS316 SUS316 Discharge side joint Valve stopper Compression coil spring Discharge side joint Valve stopper Compression coil spring Boiler model () VTC Fluoro rubber PE SUS4 VTCET EPDM SUS4 High-pressure model () VTCET EPDM Features Control functions Specifications Sodium hypochlorite injection pumps 6
8 Features Model code VTCE 49 W S JPL Series name : Standard (pulse input) type M: Analog input type T: Timer control type Not all model combinations are possible. When selecting the pump model, first check Specification and Liguid-end material. Model(discharge volume standard) [General chemical liquid injection model w/relief valve] R : ml/min 60R : 60mL/min 100R : 100mL/min [General chemical liquid injection model] : ml/min 60 : 60mL/min 100 :100mL/min 200 :220mL/min*1 [Boiler chemical liquid injection model w/relief valve*2] R : 28mL/min VTCE VTCF FTCE FTCF FTCT 6TCT Liquid-end material VTCET Hose standard (size/material) PE/FEP/ 1/4" 3/8" PE/FEP 4 6 PA specification W : Standard BW : Boiler Applicable standard S : Standard CE : CE marking -compatible Power plug EUP : Euro plug ULP : UL plug AUP : Australia plug UKP : UK plug JPL : Japan lead wire Control functions [Boiler chemical liquid injection model*2] : 28mL/min [High-pressure chemical liquid injection model *2] : 25mL/min [High-viscosity chemical liquid injection model] 60 : 60mL/min 100 : 100mL/min VTCET VTCF RC 1/4 FNPT 1/ *1 SAFE mode and ECO mode cannot be used. The information pertaining to liquid-end parts only applies to the VTCE/VTCF type. *2 SAFE mode cannot be used. : High-pressure V : High-viscosity Specifications Sodium hypochlorite injection pumps Performance specifications Specification Max.discharge volume*1 Max.discharge pressure*1 Stroke speed Stroke length Connection (hose/tube:i.d x O.D) Viscosity of transfer liquid Temperature of transfer liquid Ambient temperature Environmental resistance Insulation class Weight kg ml/min L/H MPa bar Model /M/T R/ R/ 60R/ VTCE/VTCF FTCE/FTCF FTCT 6TCT VTCET(boiler) VTCET(high-pressure) VTCE/VTCF FTCE/FTCF FTCT 6TCT VTCF(high-viscosity) /1.0 *2 7/10 * /1.0 *2 7/10 * strokes/min (Enables setting in 1-stroke units) mm (Enables adjustment using the dial) Discharge side 4 x 9( braidedhose) 6 x 11( braided hose) 6 x 8(PE) 6 x 8(FEP) 4 x 6(PA) Rc1/4 6 x 8(PE) 6 x 8(FEP) 12 x 18 6 x 8(PE) 6 x 8() 6 x 8(PE) 6 x 8() 1/4"x3/8"(PE) 1/4"x3/8"(FEP) 1/4"x3/8"(PE) Suction side 1/4"x3/8"(PE) 4 x 9( braided hose) 4 x 9( braided hose) 1/4"x3/8"(FEP) ( braided hose) 1/4" x 3/8"(PE) Air-release 4 x 6 (soft hose) - 4 x 6 (soft hose) - 50mPas or less 0 40(no freezing allowed) 0 40 IEC standard:ip65 or equivalent (water-&dust-proof) B 3,000mPas or less* *1 Conditions:Clean water, room temperature. *2 0.7MPa (7bar) for models w/relief valve(r type) whereas 1.0MPa (10bar) for models w/o relief valve. *3 When transferring high-viscosity liquids, the maximum discharge volume may be lower than the specified volume depending on the characteristics of the liquid and operating conditions. Consult TACMINA separately when transferring high-viscosity liquids. Specification Max.discharge volume*1 Max.discharge pressure*1 Stroke speed Stroke length Connection (hose/tube:i.d x O.D) ml/min L/H MPa bar Model /M/T 100R/ VTCE/VTCF FTCE/FTCF FTCT 6TCT VTCF(high-viscosity) VTCE/VTCF strokes/min (Enables setting in 1-stroke units) mm (Enables adjustment using the dial) Discharge side 6 x 11( braided hose) 6 x 8(PE) 6 x 8(FEP) 6 x 8(PE) 6 x 8() 1/4"x3/8"(PE) 1/4"x3/8"(FEP) Suction side 1/4" x 3/8"(PE) 12 x 18 ( braided hose) 6 x 11( braided hose) 6 x 8(PE) 1/4" x 3/8"(PE) Air-release 4 x 6 (soft hose) - - Viscosity of transfer liquid 50mPas or less 3,000mPas or less*2 50mPas or less Temperature of transfer liquid 0 40(no freezing allowed) Ambient temperature 0 40 Environmental resistance IEC standard:ip65 or equivalent (water-&dust-proof) Insulation class B Weight kg *1 Conditions:Clean water, room temperature. *2 When transferring high-viscosity liquids, the maximum discharge volume may be lower than the specified volume depending on the characteristics of the liquid and operating conditions. Consult TACMINA separately when transferring high-viscosity liquids. 7
9 Control function specifications External dimensions Signal Control Digital Manual operation Pulse proportional control Analog input Input Output Number of strokes Discharge volume control Division Magnification Analog proportional control Interval DAY Timer WEEK DAY + Interval WEEK + Interval Timer + Pulse Division proportional control Magnification External operation signal External stop signal Operation sync pulse Alarm output Anti-corrosion performance Chemical liquid temperature: 0 to 40 C Hydrochloric acid Sulfuric acid Sodium hydroxide Ammonia water Sodium hypochlorite Hydrogen peroxide Poly aluminum chloride (PAC) Aluminum sulfate Polymer coagulant T M One port: analog signal (DC 4 to 20 ma, input resistance: approximately 110 ) One port: pulse signal One port: pump stop (no-voltage contact or open collector, signal (no-voltage maximum no. of pulses: 1200 pulses/minute, contact or open collector, minimum pulse width: 25 ms [ON period]) maximum no. of pulses: One port: pump stop signal 1200 pulses/minute, (no-voltage contact or open collector, minimum pulse width: maximum no. of pulses: 1200 pulses/minute, 25 ms [ON period]) minimum pulse width: 25 ms [ON period]) One port: solenoid sync pulse signal (DC 10 ma, 25 V or less) One port: batch warning signal (DC 10 ma, 25 V or less) 1 to 0 (Enables setting in 1-stroke units) 0.1 to maximum discharge volume (Setting in 0.1mL/min. units enabled) 1/9991/ Liquid-end material HC H2SO4 NaOH NH4OH NaCO H2O2 A2SO43 1 pattern (19999min.) 9pattern 7pattern 1/9991/ VTCE 60% VTCF Proportional band/set point method The shape and dimensions differ slightly depending on the liguid-end material and connection type. 20% 80% 12 % *1 There are cases where the specified maximum discharge volume may not be achieved for the transfer of high-viscosity liquids due to liquid characteristics and conditions. If you are going to use the pump for transferring high-viscosity liquids, please contact your dealer or TACMINA for special consultation. The anti-corrosion performance varies widely depending on environmental conditions such as temperature, humidity, and ultraviolet rays. The above table is not intended to guarantee absolute safety. The data in the above table indicates the anti-corrosion performance for liquid-end materials of the pumps. For the anti-corrosion performance of hoses, please contact your dealer or TACMINA separately. Power supply specifications Refer to this table according to the Liquid-end material of each model. FTCE 60% Rated voltage V Number of phases Frequency Hz Maximum current A Maximum power consumption VA Average power consumption W Cable FTCF 20% 80% R/ Accessories Hose Tube Air purge hose with relief valve*1 Anti siphonal check valve Foot valve weight Hose pump Cable ties (INSULOK ) for relief hose (spare)*3 1 *2 1setR1/2) FTCT 38% 98% 12% % R/ Boiler High pressure 60R/60 100R/ AC V±10 Single phase 50/60Hz Cabtyre cable510 Signal cable 2m Pump attachment bolts and nuts 2 sets (M5x) Instruction manual 1copy *1 This hose is already attached to models with the simple relief valve. *2 This hose is not supplied with 200-type models. *3 This accessory is supplied with models with the simple relief valve. The signal cable is sold separately. The signal cable is included when the M and the chemical injection PTS series are purchased as a set. 1 1set VTCET /M/T General chemical model Boiler High pressure High viscosity VTCE VTCF FTCE FTCF FTCT 6TCT VTCET 3m 3m 3m 3m 1set 1 set (R1/2 or R3/8) 1set Discharge side: 2 Suction side: 1 1 1set R1/2) VTCF (High viscosity) 1 00mPas*1 VTCET Suction side: 1 1 6TCT 98% 90% VTCF 3m Features Control functions Specifications Sodium hypochlorite injection pumps 8
10 Safe Pump Models Dedicated for Sodium Hypochlorite Injection Features Air block In-line type automatic air-release Air block and in-line type automatic air-release function DCLseries In-line type automatic air-release In-line type automatic air-release function CLseries Control functions Two mechanisms for preventing gas lock In-line type automatic air-release mechanism DCL and CL series are equipped with an air-release mechanism designed using a new concept. The in-line air-release mechanism of these models assures the elimination of air that is trapped in the pump head and automatically prevents the discharge trouble caused by gas lock. Conventional design Air New design Chemical liquid and air Chemical liquid Specifications Sodium hypochlorite injection pumps Air block mechanism DCL series pumps are equipped with a degassing joint as standard equipment. The degassing joint prevents intrusion of air that causes gas lock. Prevents intrusion of maximum 15cc of air. Liquid Air Easy-to-check trapped air Suction The transparent acrylic pump head, which has an innovative design to minimize dead space, enables the operator to check the trapped air at a glance. Air is discharged from a dedicated air purge port. Chemical liquid leaks into the air purge port side under some conditions and the discharge volume becomes unstable. Air-release performance Air purge time [sec.] Anti siphonal check valve that prevents clogging at the injection point Conventional pumps Main pipe (raw water) Standby state The pressure inside the discharge side and pump head becomes equal and the air is compressed. Injection point (no injection state) Crystallization caused by reaction between sodium hypochlorite and calcium in raw water. DCL/CL series Main pipe (raw water) Discharge process The smaller volume of air after it is compressed is discharged together with the liquid. Comparison of the time required to purge air that is trapped in the pump head between CL and previous models (CLPZD, ARPZD). Test conditions (Discharge pressure: 1.0MPa, air volume: 0.1mL) Test conditions (Discharge pressure: 1.0MPa, air volume: 0.5mL) Approx. 60% Approx. 60% reduction reduction Unable to purge air Previous model CL type Previous model AR type Air purge time [sec.] Previous model CL type Previous model AR type The check valve cap closes to prevent crystallization caused by reaction between sodium hypochlorite and calcium in raw water. 9
11 Model code DCL Performance specifications Liquid-end materials External dimensions DCL/DCLM/DCLT Air purge port Series name DCL : Air block and in-line type automatic airrelease functions CL : In-line type automatic air-release function Specification Max.discharge volume*1 Max.discharge pressure*1 Connection (hose/tube:i.d O.D) Weight Stroke speed Stroke length *1 Conditions:Clean water, room temperature. *2 0.7MPa (7bar) for models w/relief valve(r type) whereas 1.0MPa (10bar) for models w/o relief valve. *3 Provided for the DCL series only. Packing Degassing joint Air purge port ATCF 4 9 W S structure Discharge side joint Spacer Spacer Accessories CL/CLM/CLT [Usage Precaution] When diluting sodium hypochlorite, if you do not use pure water or water processed with a water softener, the pump may malfunction or discharge trouble may result. ml/min L/H MPa bar Model Discharge side Suction side Air-release Degassing joint*3 Viscosity of transfer liquid Temperature of transfer liquid Ambient temperature Environmental resistance Insulation class kg Not all model combinations are possible. When selecting the pump model, first check Specification and Liguid-end material. Control type None : Standard (pulse input) type M : Analog input type T : Timer control type R/ 60R/ Model (discharge volume standard) 7/10* strokes/min (Enables setting in 1-stroke units) 0.51 mm (Enables adjustment using the dial) ( braided hose) ( braided hose) (PE) (PE) 1/4" 3/8" 1/4" 3/8" (PE) (PE) 4 6 (soft hose) 1/4" 3/8" (soft hose) 50mPas or less 040(no freezing allowed) 040 IEC standard:ip65 or equivalent (water-&dust-proof) B DCL2.0 CL /1.0*2 DCL/DCLM/DCLT AcrylicPMMA Fluoro rubber Special fluoro rubber ATCF W/ relief valve R: ml/min 60R: 60mL/min 100R: 90mL/min W/0 relief valve : ml/min 60 : 60mL/min 100 : 90mL/min DCL2.1 CL R/ CL/CLM/CLT ATCF Liquid-end material Hose/tube Air purge hose with relief valve*1 Degassing joint Anti siphonal check valve Foot valve Cable ties (INSULOK ) for relief hose (spare)*2 Signal cable Pump attachment bolts and nuts Hose standard (size/material) PE 1/4" 3/8"PE Air purge port specification W: Standard DCL/DCLM/DCLT 1 set (hose already attached) Applicable standard S: Standard CE: CE marking -compatible 3m 1m 1 set (R1/2) 1 JPL Power plug CL/CLM/CLT 1 set Operating instructions 1 copy *1 The air purge hose with relief valve is already attached to this pump. *2 This accessory is supplied for models with the relief valve (R type). The signal cable is sold separately. The signal cable is included when the M and the chemical injection PTS series are purchased as a set. 2m 1 set EUP:Euro plug ULP :UL plug AUP:Australia plug UKP:UK plug JPL:Japan lead wire Features Control functions Specifications Sodium hypochlorite injection pumps 10
12 Options Degassing joint Degassing joint is installed at the suction side of a pump. It separates absorbed air bubbles from the liquid to prevent air bubbles from entering the pump head. This joint is supplied with the DCL series as standard equipment. Flow checker Flow checker is highly resistant to acid and alkalis and allows the injection operation of the pump to be checked at low cost. The pump-direct connection type and hose connection type are the two types of volume checkers available. Parts kit Parts kit includes all required consumables in a set and is more economical than purchasing the parts separately. Since all consumables are packaged in one box, it also makes inventory management easier. pressure exhaustion valve pressure exhaustion valve is directly connected to the discharge side of the pump so that the pipes can be safely purged of abnormal pressure that builds up. It also enables residual pressure and residual liquid to be safely discharged when maintenance services are performed. Pulse generator type flowmeter When using this flowmeter in combination with a Tacmina pulse signal input type metering pump, you can construct a simple and low-cost injection system proportional to the required flow rate. Related equipments Relief valve (safety valve) Relief valve automatically releases excessive pressure that builds up inside the discharge side pipes due to clogging of the pipes or while the discharge valve is closed. It can prevent accidents such as damage to the pump or piping. Flow indicator and photoelectric sensor These optional products enable you to check the injection operation visually as well as by means of a sensor. Back pressure valve Float switch Back pressure valve prevents excessive liquid flow and siphon effect by sealing the outlet port of the liquid with a diaphragm, and by applying just enough force (back pressure) to overcome the fluid inertia force. Float switch will stop the pump when the remaining volume of chemical liquid in the tank becomes low. They also cause an alarm to be emitted to notify you that it is time to refill the liquid. Two types of float switches are available, namely the float type with choices of one-point and two-point type sensors, and the electrode type, which is highly resistant to chemicals. Pump and tank combination Chemical injection system PTS Tank capacity /50/120 L Compact design and easy to assemble in equipment and install. You can start operation by simply connecting the power supply and piping. For large-capacity chemical injection PZiG/PZD/PZi Max. discharge volume Max. discharge pressure 0 to 1000mL/min. 1.0Mpa Quick calibration based on actual discharge volume Pulse input-based proportional control and external stop input control Tank Tank capacity 25 to 1000L Solution tank PE tank tank Product designs and specifications are subject to change without notice for product improvement. Head Office: Awajimachi, Chuo-ku, Osaka Japan Tel.+81(0) Fax.+81(0) URL trade@tacmina.com EC-050 (3) /2/VSS JQA EM0637 Production Department
Solenoid-driven Diaphragm Metering Pump
Solenoid-driven Metering Pump Features Equipped with New Functions for Higher Safety, Superior Eco-friendly Performance, and Optimal Ease of Use Higher Safety Three types of safety functions that realize
More informationSolenoid-driven Diaphragm Metering Pump
Solenoid-driven Diaphragm Metering ump www.tacmina.com Safe, Easy and Long-life Relief-valve function, wide voltage range, easy operation, tough body, extensive selection of liquid-end materials, wide
More informationSolenoid-driven Diaphragm Metering Pump
Solenoid-driven Diaphragm Metering ump www.tacmina.com Safe, Easy and Long-life Relief-valve function, wide voltage range, easy operation, tough body, extensive selection of liquid-end materials, wide
More informationSolenoid-driven Diaphragm Metering Pump
Solenoid-driven Diaphragm Metering ump www.tacmina.com Safe, Easy and Long-life Relief-valve function, wide voltage range, easy operation, tough body, extensive selection of liquid-end materials, wide
More informationSeries PZ Pulse Metering Pumps
BULLETIN PZ- 22 Series PZ Pulse Metering Pumps Manual or programmable A single model accepts either pulse or milliamp signals Operates on any single-phase voltage from 94 vac through 264 vac Pump delivery
More informationSeries PZ / PZi / PZiG
BULLETIN PZ- 8 Series PZ / PZi / Pulse Metering Pumps US Patent #6,283,717 The Power of Intelligent Pumps Expands! TYPE PZ (manual) TYPE PZi4 (automatic) TYPE PZi8 (programmable) Features MANUAL EXTERNAL
More informationSolenoid-driven Diaphragm Metering Pump. PZ Series OPERATION MANUAL
Solenoid-driven Diaphragm Metering Pump PZ Series OPERATION MANUAL Please read this OPERATION MANUAL carefully before use. Operating the pump incorrectly in disregard of these instructions may lead to
More informationSeries PZ and PZi Pulse Metering Pumps
BULLETIN PZ-3 Series PZ and PZi Pulse Metering Pumps CHEMICAL PUMP CO., INC. US Patent #6,283,717 The Age of Intelligent Pumps Finally Arrives! TYPE PZ (manual) TYPE PZi4 (automatic) TYPE PZi8 Intelligent
More informationHydraulic Diaphragm type Metering Pump
Hydraulic Diaphragm type Metering Pump For Metering Injection in Petr Hydraulic diaphragm metering pumps have both the high-pressure and high-precision features of plunger type pumps and zero liquid leakage
More informationSolenoid-driven Diaphragm Metering Pump. SM Series
Solenoid-driven Diaphragm Metering Pump SM Series INSTALLATION, OPERATION AND MAINTENANCE MANUAL Before beginning operation, read this manual carefully! Ignoring the instructions in this IOM MANUAL and
More informationProMinent. ProMinent D4a Metering Pumps with built-in proportional controllers
D4a Metering Pumps with built-in proportional controllers A series of solenoid-driven metering pumps with built-in ph controller, oxidation-reduction potential (Redox) controller or chlorine controller.
More informationAPL Direct-driven type
Pump APL Direct-driven type Metered transfer Solving Trouble and Dissatisfaction of Transfer Pumps in a Single Stroke With rotary volumetric pumps and other conventional pumps, there has always been the
More informationPump. APLS Sanitary. Direct-driven type. Metered supply
Pump APLS Sanitary Direct-driven type Metered supply The Arrival of a Metering Transfer Pump with an Innovative Mechanism Ideal for Sanitary Processes! The APLS Series transfers liquids gently as it is
More informationExcel AD Electromagnetic dosing pump
Flow rate Up to 7.6 l/h Pressure Up to 17.3 bar Liquid ends Acrylic, stainless steel, PP, PVC, PVDF, designed for viscous products, designed for degassing products LCD user interface with display of the
More informationDiaphragm-Type Process Metering Pump
Diaphragm-Type Process Metering Pump Z TACMINA Core Technology TACMINA is a specialist manufacturer of chemical pumps that incorporate "diaphragms" as their core technology. For about 50 years now, we
More informationSolenoid-driven Diaphragm Metering Pump. SP/SA/ST Series
Solenoid-driven Diaphragm Metering Pump SP/SA/ST Series INSTALLATION, OPERATION AND MAINTENANCE MANUAL Before beginning operation, read this manual carefully! Ignoring the instructions in this IOM MANUAL
More informationSOLENOID DRIVEN DOSING PUMPS MX series
SOLENOID DRIVEN DOSING PUMPS MX series www.fwtsystems.it INTRODUCING MX SERIES FWT is pleased to introduce MX solenoid driven dosing pumps, a new series which will enable to widen the product range covering
More informationDDA AR-PVC/V/C with access.
GRUNDFOS DATA BOOKLET DDA 7.5-16 AR-PVC/V/C with access. Grundfos pump 97974077 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/ddafam/97974077/dda-7-5-16-with-access.html
More informationGRUNDFOS PRODUCT GUIDE DMH. Dosing pumps
GRUNDFOS PRODUCT GUIDE Dosing pumps Contents Features and benefits 3 Performance range 4 Pump selection options 36 Pumped liquids List of pumped liquids 39 Identification Type key 7 Functions Functional
More informationPKX MA/A. Characteristics
PKX MA/A The PKX is a PTFE diaphragm type Solenoid Metering Pump that distinguishes itself for its simplicity of use. It has proven reliability and quality and due to it compact design and versatility
More informationFLEX-PRO TM PERISTALTIC PUMPS
FLEX-PRO TM PERISTALTIC PUMPS Applications Chemical Wastewater treatment Chlorination Pulp & Paper Slurries Printing inks Oil based fluids Gaseous fluids Shear sensitive fluids Caustics Chemical Slurries
More informationsolenoid driven diaphragm type metering pump
solenoid driven diaphragm type metering pump Affordable - Versatile - Durable The pump series covers a capacity range of 0.16 3.57 gph (0.6 13.5 l/h) at pressures 145 21 psig. Its compact construction
More informationPDF-A Electromagnetic metering pumps. EHN series
PDF-A 0045-03 Electromagnetic metering pumps EHN series The latest electromagnetic metering pump equipped with digital controller & multi-voltage EHN Series is the latest electromagnet drive & diaphragm
More informationDOSING UNIT WITH TIME CONTROL INSTRUCTIONS MANUAL WARNING!
DOSING UNIT WITH TIME CONTROL DOSING PUMP WITH TIME CONTROL SERIE DCK STORAGE TANKS SERIE SL INSTRUCTIONS MANUAL WARNING! The equipment must be used only for the utilization for which they have been designed,
More informationSeries PZ and PZi Pulse Metering Pumps
BULLETIN PZ-03 Series PZ and PZi Pulse Metering Pumps CHEMICAL PUMP CO., INC. US Patent #6,283,717 The Age of Intelligent Pumps Finally Arrives! TYPE PZ (manual) TYPE PZi4 (automatic) TYPE PZi8 Intelligent
More informationAn Innovative Flow Sensor
NEW Separate-amplifier type digital flow sensor FD-V7 Series An Innovative Flow Sensor PPS PFA 5 liters 2 liters 5 liters 4 liters 2 liters The debut of an innovative, Ultimate convenience has been separate-amplifier
More informationBATCHING UNITS - PUMPS SERIES ACL - AXL - DPZ INSTRUCTIONS MANUAL WARNING!
BATCHING UNITS - PUMPS SERIES ACL - AXL - DPZ DOSING PUMPS SERIE ACL - AXL - DPZ STORAGE TANKS SERIE SL WATER METER SERIE CD - CW INSTRUCTIONS MANUAL WARNING! The equipment must be used only for the utilization
More informationDLX MA/AD. Characteristics
DLX MA/AD The DLX range of pumps is a proven PTFE diaphragm type Solenoid Metering Pump that distinguishes itself with having a wide range of control options. Since its launch the DLX pump range has given
More informationProMinent delta Solenoid Diaphragm Metering Pumps
Overview: delta Ideal for applications requiring metering pump accuracy with minimal pulsation (see page 127 for spare parts and page 134 for control cables) Continuous or pulsating dosing Configurable
More informationKjeldahl Method of Nitrogen Determination
Kjeldahl Method of Nitrogen Determination N behr Labor-Technik The behr programme for determining nitrogen in accordance with the Kjeldahl method The behr program for determining nitrogen in accordance
More informationA6 type. General universal type. Submerged type Connector box type. Installation method Titanium PPS FKM
Industrial Conductivity (Electric Conductivity) Detector A5/A6 type (For general multipurpose) AR4/AR5 type (for small purified water equipment) Dual electrode conductivity (electrical conductivity) detector
More informationCompact Flow Rate Sensor. RAPIFLOW FSM3 Series Resin Body Type. Diversified High Performance. High performance. User-friendly. Compatible CC-1235A 1
Compact Flow Rate Sensor RAPIFLOW Resin Body Type Diversified High Performance High performance User-friendly Compatible CC-1235A 1 Diversified Five types of gases can be measured with just one unit Gas
More informationTekna. Solenoid driven dosing pumps. Your Choice, Our Commitment
Tekna Solenoid driven dosing pumps Your Choice, Our Commitment 02 Solutions for Water & Industry Five times the Flexibility A single outer casing contains 5 different models with flow rates ranging from
More informationAccurate, versatile chemical pumps
Watson-Marlow Pumps Group has six world-class factories supported by direct sales operations in 25 countries and distributors in more than 50 countries. For contact details visit our website: www.wmpg.com
More informationDLX MA/MB. Characteristics
DLX MA/MB The DLX range of pumps is a proven PTFE diaphragm type Solenoid Metering Pump that distinguishes itself with having a wide range of control options. Since its launch the DLX pump range has given
More informationBe prepared with Lutz. Safety is our concern
Be prepared with Lutz Safety is our concern L u t z P u m p S e t s L u t z P u m p S e t s Lutz Pump Sets A quick solution for many applications 2 Already pre-assembled Example: Pump set consisting of:
More informationLPP-M PUMP THE SOLUTION YOU VE BEEN LOOKING FOR
LPP-M PUMP THE SOLUTION YOU VE BEEN LOOKING FOR LAROX PERISTALTIC PUMPS FOR METERING The innovative Larox Peristaltic Pumps for Metering (LPP-M) set a new industry standard for peristaltic pump technology.
More informationDiaphragm Metering Pumps
DATA BOOK DME/DMS, DMM Diaphragm Metering Pumps DME/DMS TECHNICAL DATA BOOKLET 1. General description, DME/DMS, DMM 1.1 Digital Dosing, DME/DMS............ 3 1.2 DMM.............................. 4 1.3
More informationVacuum pump system type
type VS*P Vacuum component C O N T E N T S Series variation 166 20 mm width universal type (/M) 168 10.5 mm width universal type (/M) 184 31.5 mm width discrete type (VSQP) 214 11 mm pitch manifold dedicated
More informationDSD Technology Reinventing metering pumps Dynamic Stiffness Diaphragm - High hydraulic performance
G A and G M series DOSING PUMPS / DSD Technology Up to 11.95 l/h and 70 bar / Product advantages DSD Technology Reinventing metering pumps Dynamic Stiffness Diaphragm - High hydraulic performance NEW Plunger
More informationConductivity meter. PLC Solenoid valve. Type Type On/Off Diaphragm valve. Valve islands
Conductivity meter Configurable outputs: two transistor and single or dual analog 4... 20 ma Removable backlighted display Universal process connection Type can be combined with... Three cell constants
More informationGRUNDFOS DATA BOOKLET. Oxiperm OCD to 2000 g/h. Preparation of chlorine dioxide from diluted solutions
GRUNDFOS DATA BOOKLET Oxiperm OCD-164 30 to 2000 g/h Preparation of chlorine dioxide from diluted solutions Oxiperm OCD-164 Table of contents 1. General 3 Oxiperm OCD-164 3 Applications 3 No chance for
More informationMYB1/MYG1 Series DC12V. Metal free 2, 3 port solenoid valve for chemical liquid
Metal free, port solenoid valve for chemical liquid MY/MYG Series NC (normally closed) type, universal type Working fluid: water, pure water, chemical liquids Port size: M JIS symbol MY ( port) : NC (normally
More informationMechanical Diaphragm Metering Pump
Mechanical Diaphragm Metering Pump sales@novatech-usa.com www.novatech-usa.com Tel: (866) 433-6682 Fax: (866) 433-6684 Tel: (281) 359-8538 Fax: (281) 359-0084 Pulsafeeder Expertise Since 1936, Pulsafeeder
More informationExcellence through Versatility
Metering Pumps Excellence through Versatility Liquid Metronics Incorporated has been providing quality products and service to the water treatment industry worldwide for over 25 years. Leading the way
More informationProduct Information Stepper Motor-driven Diaphragm Dosing Pump MEMDOS SMART LP
Product Information Stepper Motor-driven Diaphragm Dosing Pump Reliable dosing of chemicals Stepper motor driven diaphragm pumps are particularly suitable for highly accurate, reproducible industrial dosing
More informationProMinent Sigma/ 1 Motor Diaphragm Metering Pumps
Overview: Sigma/ 1 (S1Cb) The Sigma/1 motor diaphragm are produced with a high-strength inner housing for parts subject to load as well as an additional plastic housing to protect against corrosion. The
More informationIWAKI METERING PUMPS AX
IWAKI METERING PUMPS The highest reliability system metering Iwaki metering pumps series are compact hydraulic diaphragm pumps designed to meet the exacting requirements of modern advanced chemical processes.
More informationPCSCL1-HC1 Chlorine Dosing System With Free Chlorine Analyser & Dosing Pump
550mm PCSCL1-HC1 Chlorine Dosing System With Free Chlorine Analyser & Dosing Pump The AQUA Chlorine Dosing System is a fully engineered measurement and dosing control package for the chlorination of water
More informationUNIVERSAL. Flow Monitors Inc. INSITE Series PX - IS - TX Flow Rate Indicators and Switches
UNIVERSAL Flow Monitors Inc. INSITE Series PX - IS - TX Flow Rate Indicators and Switches 8 7 6 5 4 3 2 1 6 Fluid is always in sight Direct reading - English or Metric Mount in any position Plumb with
More informationMaxima. Base mounted solenoid driven dosing pumps. Your Choice, Our Commitment
Maxima Base mounted solenoid driven dosing pumps Your Choice, Our Commitment 02 Solutions for Water & Industry Maxima Flexibility Maxima is a base mounted solenoid driven dosing pump that features new
More informationProMinent Beta Solenoid Diaphragm Metering Pumps
Overview: Beta Ideal for basic chemical feed applications (see page 127 for spare parts, page 138 for accessory kits and page 138 for control cables) ProMinent pk_1_004_1 Capacity range 0.2-8.4 gph, 232-29
More informationAUTOMATIC LUBRICATION
5 AUTOMATIC LUBRICATION CONTENTS SECTION 5: Pages GREASE GUN OPERATED PROGRESSIVE LUBE SYSTEM 121 BATTERY BLOCK TYPE REMOTE NIPPLE SYSTEM 121 BEKA-MAX LUBRICATION SYSTEM 122 LUBECON LUBRICATION SYSTEM
More informationAccurate, versatile chemical pumps
Accurate, versatile chemical pumps Cut chemical cost through higher accuracy metering Simple drop-in installation eliminates ancillary equipment Reduced maintenance with single, no-tools, component replacement
More informationCorrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases
Corrosion Resistant and Ultra-Pure Rotameters for Accurate Measurement of Liquids and Gases Rotameters Markets/Applications George Fischer rotameters are ideally suited for a multitude of corrosive and
More informationManual and Automatic Chemical Control
Manual and Automatic Chemical Control Contents Contents About Etatron Manual Chemical and Essence Dosing B-V Peristaltic Pumps B-V Peristaltic Pump Dimensions PKX MA/AL Solenoid Pump PKX Dimensions (wall
More informationProduct Information Motor-driven Diaphragm Dosing Pumps MEMDOS E/DX
Product Information Motor-driven Diaphragm Dosing Pumps MEMDOS E/DX Reliable dosing of chemicals Motor-driven diaphragm dosing pumps play an important role in the reliable and accurate dosing of liquids
More informationGRUNDFOS alldos product information. The digital diaphragm dosing pump for difficult liquids
GRUNDFOS alldos product information The digital diaphragm dosing pump for difficult liquids Digital Dosing The Highlights Easy input and display of the dosing rate in l/h or gal/h with perfect calibration
More informationProduct Engineering Guide
PRIMARY FLUID SYSTEMS INC. 1050 Cooke Blvd., Burlington, ON. Canada, L7T 4A8 Tel: (905)333-8743 Fax: (905)333-8746 Toll-Free: 1-800-776-6580 www.primaryfluid.com primary@primaryfluid.com Product Engineering
More informationABB MEASUREMENT & ANALYTICS DATA SHEET Hydrazine monitor
ABB MEASUREMENT & ANALYTICS DATA SHEET 7835 Hydrazine monitor 2 78 35 H YDR AZ I N E MON I TOR DS / 78 3 5-E N RE V. L Measurement made easy Advanced transmitter Auto-ranging with remote range indication
More informationSpares and Accessories
Milton Roy Pumps, Spares Pump models from Stock P+055 3.6 litres an hour (Speed only) P155 3.6 litres an hour (Speed and Stroke) P+065 7.6 litres an hour (Speed only) P165 7.7 litres an hour (Speed and
More informationSeries ZSE30/ISE30. High Precision, 2-color Display Digital Pressure Switch. With One-touch fittings are newly introduced. PSE
High Precision, 2-color Display Digital Pressure Switch Series SE30/ISE30 SE ISE PSE I SE3 PS I SE 1 2 SP ISA2 IS SM PF2 IF Data With One-touch fittings are newly introduced. Straight type Elbow type 16-2-1
More informationELADOS EMP III Diaphragm Pump type
ELADOS EMP III Diaphragm Pump type 00800-01200 Mechanical stroke adjustment Stroke frequency regulation Pulse control Pulse multiplication and division Pulse memory Standard signal control Empty signal
More informationAn IDEX Water & Wastewater Business. pulsafeeder.com. Mechanical Diaphragm Metering Pump
An IDEX Water & Wastewater Business pulsafeeder.com Mechanical Diaphragm Metering Pump Pulsafeeder Expertise Since 1936, Pulsafeeder has been the global leader in fluids handling technology and innovation
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor Ideal for Narrow Mounting Space Grooved TL-G3D is ideal for high-speed pulse generator and high-speed revolution control. TL-Q2 and TL-Q5 save mounting space
More informationSA FLOW METER & FLOW SWITCH (Proximity switches are used for small flow rate)
SF FLOW METER & FLOW SWITCH Types: SF-M: SF-MA: Instantaneous flow indicator Instantaneous flow indicator + lower (or upper) microswitch SF-MAA: Instantaneous flow indicator + lower & upper microswitches
More informationDigital ph transmitter
Digital ph transmitter Compact, remote versions for DN 15 to 200 Fully programmable ph transmitter functions for all kinds of ph-measurement tasks Large range of process connections with various fittings
More informationELADOS EMP III Diaphragm Pump type
ELADOS EMP III Diaphragm Pump type 00160-00540 Mechanical stroke adjustment Stroke frequency regulation Pulse control Pulse multiplication and division Pulse memory Standard signal control Empty signal
More informationELADOS EMP III Diaphragm Pump type electronically controlled
electronically controlled Mechanical stroke adjustment Stroke frequency regulation Pulse control Pulse multiplication and division Pulse memory Standard signal control Empty signal and low level warning
More informationEGM1100C MAGMAX. Compact Electromagnetic Flowmeter GENERAL FEATURES STANDARD SPECIFICATION. General Specification
EGMC Compact Electromagnetic Flowmeter GENERA MAGMAX EGMC is the compact type electromagnetic flowmeter with a converter EGC mounted integrally on a primary head EGS lined with fluorocarbon resin PFA.
More informationOxiperm 164 and 166 GRUNDFOS PRODUCT GUIDE. Automated preparation of chlorine dioxide
Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence GRUNDFOS PRODUCT GUIDE Oxiperm 1 and 1 Automated preparation of chlorine dioxide L-OXI-PG-01 1009 009 Grundfos
More information2-Color Display High-Precision Digital Pressure Switch
2-Color Display High-Precision Digital Pressure Switch Series ZSE3/ISE3 2-color digital display allows you to choose the setting according to your application requirements. 4 different display settings
More informationIMPORTANT SAFETY INSTRUCTIONS
Installation & Parts Manual PRO SERIES PUMP IMPORTANT SAFETY INSTRUCTIONS When installing and using this product, basic safety precautions should always be followed, including:! Wear protective clothing,
More informationInline Ultrasonic Flowmeter
M-1500 Series Installation and Operating Manual The M-1500 series is an inline primary flow sensor and externally mounted controller unit. The flow sensor is a straight through flow tube that uses Transit
More informationHYBRID HYDRAULIC O OIL COOLING EQUIPMENT O-1
HYBRID HYDRAULIC O OIL COOLING EQUIPMENT O-1 List of Hybrid Unit Models Various specifications for each model. DAIKIN s lineup provides a variety of functions and capacities depending on the machine type.
More informationELADOS EMP-KKS Diaphragm Piston Pump Type
Diaphragm Piston Pump Type 00002 00014 Metering with smallest possible rate capability High reproducibility High metering accuracy even with degassing products Self-priming and self-venting with smallest
More informationThe Vario motor-driven pump series from ProMinent Adaptable to a wide range of applications VARIO METERING PUMP
The Vario motor-driven pump series from ProMinent Adaptable to a wide range of applications VARIO METERING PUMP ProMinent Modular design allows selection of the features you need Three diaphragm sizes
More informationInstruction Manual. Series E7 Metering Pumps. For file reference, please record the following data:
Instruction Manual Series E7 Metering Pumps For file reference, please record the following data: Model No: Serial No: Installation Date: Installation Location: When ordering replacement parts for your
More informationMicroTron Series C. Manual. Installation Maintenance Repair. Manual. Chemical Metering Pump
Manual MicroTron Series C Chemical Metering Pump Installation Maintenance Repair Manual Advantage Controls P.O.Box 1472 Muskogee, OK 74402 Phone: 800-743-7431 Fax: 888-686-6212 www.advantagecontrols.com
More informationGRUNDFOS ALLDOS DISINFECTION. ALLDOS DISINFECTION SYSTEMS with Chlorine Dioxide 1 GRUNDFOS ALLDOS DISINFECTION
GRUNDFOS ALLDOS DISINFECTION ALLDOS DISINFECTION SYSTEMS with Chlorine Dioxide 1 GRUNDFOS ALLDOS DISINFECTION Content Page Oxiperm 164 D 5 to 2000 g/h for diluted chemicals 8 13 5 7 3 6 9 1 10 2 5 4 Oxiperm
More informationProMinent g a m m a / L Solenoid Diaphragm Metering Pumps
Overview: gamma/ L Ideal for applications requiring automation, large turndown and/or feed verification (see page 127 for spare parts, page 138 for accessory kits and page 138 for control cables) Capacity
More informationInstruction Manual. Series E7 Metering Pumps. For file reference, please record the following data:
Instruction Manual Series E7 Metering Pumps For file reference, please record the following data: Model No: Serial No: Installation Date: Installation Location: When ordering replacement parts for your
More informationJoin the no-valve metering revolution
Join the no-valve metering revolution Join the no-valve metering revolution Qdos 30 the no-valve metering pump Accurate, linear and repeatable fl ow under varying process conditions Flow rates 0.1 to
More informationUni-Dose. For file reference, please record the following data:
For file reference, please record the following data: Model No: Serial No: Installation Date: Installation Location: When ordering replacement parts for your Pump or Accessory, please include the complete
More informationCat.NO.Ck031a-w. Products Complied with Green Procurement NITTO KOHKI CO.,LTD. JQA-EM4057 NITTO KOHKI Co,.LTD. Headquarters Research Center
Cat.NO.Ck031a-w ISO 101 JQA-EM57 NIO KOHKI Co,.LD. Headquarters Research Center ISO 9001 JQA-05 NIO KOHKI Co,.LD. Couplings Division Products Complied with Green Procurement NIO KOHKI CO.,LD. MULI CUPLA
More informationG2 Industrial Grade Meters
G2 Industrial Grade Meters The unique modular approach of the Industrial Grade Meter line allows you to section 2: g2 industrial grade meters design a meter to match your specific application. Turbine
More informationPD3/PDV3-20A/25A/40A Series
Pilot operated 2-port valve for dust collector control (Large port size dust collector valve) PD3/PDV3-20A/25A/40A Series Air operated/with solenoid valve Port size: Rc3/4, Rc1, : Rc1 1 /2-: φ48, Rc1 1
More informationTECHNICAL DATA. Measurement and control range: Control function: Control outputs: Display resolution: Housing: Ambient temperature:
Revised: 1st January 2011 The DSR is a combination controller for the measuring values ph and redox. The disinfecting power of oxidizing disinfectants (e.g. chlorine, bromine) can be measured and controlled
More informationWater and Waste Water Treatment
Seal-less Pump Technology Water and Waste Water Treatment Economy through Technology Hydra-Cell Water Treatment Pumps Compact, seal-less, Disinfection Sodium Hypochlorite Chlorine Dioxide Hydrogen Peroxide
More information2.5mm. Output configuration NPN. 2.5mm PNP. 2.5mm
Compact Square Inductive Proximity Sensor World s Smallest Square Sensor with uilt -in Amplifier 5.5 x 5.5 mm type contributes to smaller, space-- saving machines and devices. Comprehensive range; sensing
More informationPneumatic & Cushion Tire/ Electric-powered Models
Pneumatic & Cushion Tire/ Electric-powered Models 1.5-3.0 ton Perfect Balance Eco-friendly, Economical and Easy to Operate: Get Outstanding Productivity Results with the New BX Series! Featuring with cutting
More informationEX Series. Electric Actuators for Ball and Butterfly Valves
EX Series Electric Actuators for Ball and Butterfly Valves Next Generation Electrical Actuator Realization of Upgraded General-Purpose Actuators The modularization and the adoption of common parts have
More informationProMinent ProMus Hydraulic Diaphragm Metering Pumps
Overview: ProMus High pressure chemical process metering (see page 131 for spare parts) The ProMus is a motor driven metering pump with a hydraulically actuated diaphragm. The drive case and the hydraulic
More informationDigital ph transmitter
Digital ph transmitter Compact, remote versions for DN 15 to 200 Fully programmable ph transmitter functions for all kinds of ph-measurement tasks Large range of process connections with various fittings
More informationInductive Proximity Sensor
Inductive Proximity Sensor General-purpose Type in a Basic Switch Housing Mounting pitch compatible with that of mechanical basic switch. Wide operating voltage range: 10 to 30 VDC or 90 to 250 VAC. LED
More informationSeries A. Series A. Model A S I
Series A Model A 7 5 1-8 2 8 S I Model Code Configuration Control Code 0 Single Manual Control: Speed (stroking frequency) fixed and stroke length manually adjustable 1 Dual Manual Control: Speed (stroking
More informationInsertion magnetic inductive flowmeter
Insertion magnetic inductive flowmeter Sensor without moving parts Flowmeter with On/Off control Application related calibration by Teach-In function Clean in place (CIP) FDA-compliant materials Type 8041
More informationIWAKI AMERICA EHC/EHE-FF Series Electronic Metering Pump Instruction Manual
IWAKI AMERICA EHC/EHE-FF Series Electronic Metering Pump Instruction Manual INSTRUCTION MANUAL Notice 2004 Iwaki America Inc. Five Boynton Road, Holliston, MA 01746 USA tel (508) 429-1440 fax (508) 429-1386
More informationEH Series High Viscosity Electronic Metering Pumps Instruction Manual
EH Series High Viscosity Electronic Metering Pumps Instruction Manual Five Boynton Road Hopping Brook Park Holliston, MA 01746 USA TEL 508-429-1110 FAX 508-429-7433 WEBSITE: www.iwakiamerica.com Notice
More information2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type (ISE75H) 2-color digital. Functions
Series ISE70/75/75H NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red Green
More information