Transformer Module for 6-10KVA User s Manual 6-10KVA-GTM

Size: px

Start display at page:

Download "Transformer Module for 6-10KVA User s Manual 6-10KVA-GTM"

Nancy Harris
5 years ago
Views:

1 Transformer Module for 6-10KVA User s Manual 6-10KVA-GTM

2 Content 1. Important Safety Instruction An Important Notice Storage Instruction Rear Panel Explanation Installion and Operation UPS Unpacking Selecting Installation Position Installation Terminal Block Explanations for Input, Output Troubleshooting Troubleshooting Technical Specifications

3 1. Important Safety Instruction 1.1. An Important Notice There is a tiny leakage current from the Transformer Module, so make sure to it is correctly grounded before connecting to the UPS, Utility or Output Device Do not open the case, as there are no serviceable parts inside, or your warranty will be void Do not try to repair the unit yourself; contact your local supplier or your warranty will be void Non-authorized technician is not allowed to install the unit in the following areas: a. Medical equipment directly related to human life. b. Elevator, Metro(Subway) system or any other equipment related to human safety. c. Public System or critical computer Systems Any installation related to human safety, public system, or emergency device shall be consulted with dealer first; otherwise, your warranty will be void If any liquid is split onto the unit or foreign objects dropped into the unit, the warranty will be null and void Do not install the unit in an environment with sparks, smoke, or gas Make sure the unit is installed within a proper invironment as specified: a. Keep it in the place of 0-40 C and 30-90% non-condensing humidity b. Keep away from direct sunlight c. Keep away from the objects that give off excessive heat and areas that are excessively wet. d. Keep away from the environment that generates ARCs. e. Keep away from dusty, corrosive and salty environments f. Install the unit indoors as it is not designed for installation outdoors. 2

4 To eliminate any overheating of the unit, keep all ventilation openings free from obstruction, and do not store things on the top of the unit. Keep the unit 30 cm away from the wall The unit is recommendded to install in an environment with 5M3 airflow per hour Please stop using the unit in case of any noise or smell occurred, then consult with your dealer at once Make sure the unit is completely turned off when moving the unit from one place to the other. It might cause electrical shock if the input or output is not cut completely Improper grounding might cause unexpected leakage current, so please make sure that the ground of the Utility is properly connected Please make sure that the input voltage of the unit matches the supply voltage This unit can be installed with an optional Maintenance Bypass Switch. Please make sure you may follow the operation procedure 1.2. Storage Instruction Keep it in a tidy and clean environment. Do not block the ventilation holes When use a damp cloth to clean the unit, please make sure the unit is turned off to avoid any hazardous risk It is not allowed to touch any terminals of the unit if it is connected to the Utility. 3

port B Input & Output Terminal Block C For UPS Input D Maintenance Bypass Switch E Air

5 1.3. Rear Panel Explanation 6K E A B C D 10K Not Intended to TNV Communication Network TB1 TB2 D F A G B INV BYPASS Not Intended to TNV Communication Network TB1 TB2 A N22 RJ-45 Communication port B Input & Output Terminal Block C For UPS Input D Maintenance Bypass Switch E Air Ventilation Openings F Thermal breaker for the protection of Load in abnormal condition: CB3 G Cooling Fan 4

6 2. Installation and Operation 2.1. UPS Unpacking Remove the unit from PE foam Check Accessories one set of user s manual one set of accessory kit: (C1 & F1 are for the unit with Maintenance Bypass Switch Only) A1 A2 A3 x4 x4 x1 B1 B2 B3 F1 C1 x2 for 2U for 3U x2 x2 x1 S1 S2 S3 S4 x2 x2 x4 x8 x If the unit is with Maintenance Bypass switch, the cable attached as below: 12 NEMA L6-30P cable x 2pcs 12 NEMA L6-30R cable x 1pce If the unit is without Maintenance Bypass Switch, the cables Attached are: 10 AWG, 105 cable x 3pcs 5

7 2.2. Selecting Installation Position It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to the unit and extend the life of the unit. Please follow the advice below: Keep at least 30cm(12 inches) clearancer from the rear panel of the unit to the wall. Do not block the air-flow to the ventilation openings of the unit. Also check the installatin site to avoid over-heat and excessive moisture. AIR AIR 3KVA (M ) Do not place the unit in an environment near dust, corrosive or salty material or flammable objects Do not expose the unit to outdoors. 6

8 2.3. Installation Installation as a Tower Unit GTM UPS Battery S3 7

9 Installation as a Rack Unit B1 B2 S4 B1 B3 S4 S3 S3 UPS GTM Battery 8

10 2.4. Terminal Block Explanations for Input, Output Terminal Block Explanation 6K 10K TB1 TB2 TR OUTPUT G3 N22 L22 N11 L12 L11 TO UPS OUTPUT UTILITY INPUT G2 N2 L2 G1 N1 L1 TB1 TB2 G3 N22 L22 N11 L12 G2 N2 L2 TR OUTPUT TO UPS OUTPUT N/A N/A L11 N/A L1-N1:Utility Input G1:Input Ground L2 N2:Connect to UPS Output Terminal G2:Connect to UPS Output Ground Terminal L11 L12 N11 L22 N22: the Output Terminals of the Unit G3:The Output Ground Terminals of the Unit 9

11 Output Wiring Explanation The max. output current for each terminal is 30A (6K) or 50A (10K) When the wiring of TR OUTPUT block is as drawing 2-1a and the input of L2-N2 from UPS OUTPUT block is 200Vac, 220Vac, 230Vac or 240Vac, the output voltage will be 100Vac, 110Vac, 115Vac or 240Vac. If the input of L2-N2 from UPS OUTPUT block is 208Vac, the output will be 120Vac When the wiring of TR OUTPUT block is as drawing 2-1b and the input of L2-N2 from UPS OUTPUT block is 200Vac, 220Vac, 230Vac or 240Vac, the output voltage will be 200/100Vac, 220/110Vac, 230/115Vac or 240/120Vac. If the input of L2-N2 from UPS OUTPUT block is 208Vac, the output voltage shall be 240Vac/208Vac/120Vac. 208Vac 6KVA (Max) N22 L22 N11 L12 L11 N22 L22 N11 L12 L11 110Vac 6KVA (Max) (a) Drawing Vac 120Vac 3KVA (Max) 240Vac 6KVA (Max) (b) 10

12 3. Troubleshooting 3.1. Troubleshooting If the unit can not be operated normally, please check if all the cables are properly connected and the Utility is under normal condition. If the problem can not be solved, please consult with your dealer immediately. 11

13 4. Technical Specifications Specifications Item Description Condition A. AC Input Terminal BBP-AR-6000RM-PSW- ONL-TRANSFORMER BBP-AR-10000RM-PSW- ONL-TRANSFORMER Unit w/o Bypass Switch Vac (1Φ) 1 Voltage Unit w/bypass INV Vac (1Φ) Switch BYPASS Vac (1Φ) 2 Current N/A 30Arms(Max) 50Arms(Max) 3 Frequency N/A 50Hz/60Hz±5Hz B. Output Terminal 1 Voltage N/A Vac (1Φ) 2 Current N/A 30Arms(Max) 50Arms(Max) 3 Frequency N/A 50Hz/60Hz±3Hz C. Maintenance Bypass Switch 1 Transfer Time 0~100% Load <2ms D. Communication 1 Bypass Detection For Unit with Maintenance Bypass Switch RJ-45 connector E. Overview F. Weight 1 W*H*D 440mm*88mm*660mm(2U) 440mm*132mm*660mm(3U) Unit with Maintenance Bypass Switch 42kgs 53kgs Unit without 41kgs 52kgs 12

14 Maintenance Bypass Switch G. current leakage 100% Load < 3mA H. Marks CE, culus 13

15 14

P90L-ISO6MB & ISO10MB

P90L-ISO6MB & ISO10MB for 6kVA, 10kVA Models User & Installation Manual www.xpcc.com 2014. All rights reserved. (Rev 9/23/14) Table of Contents Important Safety Instructions...3 An Important Notice...3