Innovative products for today s custom builder

Transcription

1 Innovative products for today s custom builder Inside Page 7 Page 1 Page 37 Page 35 May 2017

2 What s NEW at StreetWorks for 2017 We are proud that our Fuzzbuds won the People s Choice Award at the Goodguys Nationals! 3 years in a row of national product awards has inspired us to come up with even more innovative products. Several of them are shown here on this page but keep your eyes open for other cool new stuff inside. Backup Mirror/Camera If you re like me you thought backup cameras were for sissies until you got one in your daily driver. Now you wish someone made one that looked better than those systems sold at big box parts stores. Well we ve solved the issue with this Watsons StreetWorks exclusive. We ve placed a 4.3 inch screen in a custom billet center mirror that will look great in any ride. We offer 2 styles of cameras to make the installation easy. Wiring the system is amazingly easy, just supply power and ground to the camera and screen, then one wire joins the 2. When you put your vehicle in reverse the solid state screen comes on instantly. The smoked glass on the mirror looks great when the screen is off and cuts the nighttime glare from lights behind you. Mount the mirror on your dash or overhead. The arm pivots at both ends giving you plenty of adjustment. The mirror measures 3" by 6" overall and the base is 2-½" by ¾". The arm is 2-½" long. The screen has several adjustments including contrast, brightness, etc. Choose from either a license plate mounted camera or a body mounted unit. Both packages include the billet framed mirror/screen with mounting hardware, a waterproof camera, wire and instructions. To mount the through hole camera simply drill a ¾" hole on a level body panel. IT-MIR-TH Backup mirror/camera system with through hole camera..$ The license plate camera mounts behind your plate with just the tiny camera sticking over. Run the wire through a small, 7/32" hole. IT-MIR-LP Backup mirror/camera system with License plate camera..$299.00

3 GT MODULAR SWITCHES 1 We now offer our GT3 and GT4D switches polished and/or engraved. Call us to discuss your specific needs and we ll quote you a price. Note that the prices listed below are for the brushed finish without engraving. GT4D Modular Switch Panels The modular design of the switch face lets us build you a custom switch panel to control just about anything need. The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you will need relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1-3/4" tall. A single switch is 1-5/8" long. Each additional switch adds 1-1/8". (for example a 6 switch panel is 7-3/8" long) The toggle is 5/8" tall. The GT4D series include the dividers to safeguard those important circuits from accidently being switched. The GT3 series are without dividers. We can mix the 2 on a single panel. GT4D Switches with Dividers Single GT4D switch $ Double GT4D switch $ switch panel of GT4D $ switch panel of GT4D $ switch panel of GT4D $ switch panel of GT4D $ switch panel of GT4D $ Need a bigger panel? Give us a call. Adding lights? $7.00 per light. Tell us what colors and when they should come on. GT2 Power Window Switches This new short rocker makes a perfect power window switch to match your new GT4D dash panel. Polarity reversing modules and instructions included. Rocker is approximately 1/4" tall. Single GT2 P/W Switch $84.00 Double GT2 P/W Switch $ GT2 Triple Switch Kit $ Triple kit includes a single and a double panel. GT3 Switches (No Dividers) The same sharp looking modular switch panels and rockers but without the dividers. Single GT3 switch $ Double GT3 switch $ switch panel of GT $ switch panel of GT $ switch panel of GT $ switch panel of GT $ switch panel of GT $ Hands-free Calling from your fuzzy dice! After over 65 years we ve given fuzzy dice an update. Up until now a pair of dice hanging from your mirror were nothing more than a symbol that you were a hot rodder and part of the family of car guys and gals. We ve put full hands-free calling inside our Fuzz Buds TM. These modern dice connect to your smart phone by wireless Bluetooth connectivity. We use a pair of quality speakers for full stereo sound and the microphone has excellent background noise cancelation. Now you can make and receive calls while you keep your hands on the wheel (or maybe your sweetheart s knee). At 3" on a side they look like an ordinary pair of dice. Use them for calling, playing music, or GPS directions, whatever your smart phone can do can be driven through these babies. You can even ask Siri to find the closest malt shop! Use them in your ride, at a picnic or working in the shop. Charge the built in long life battery (6 plus hours) with the supplied charging cord that plugs into any USB port. IT-FD..$99.00 Patent pending

4 2 POWER WINDOW SWITCHES & PANELS Oval Billet Power Window Switches Billet 3-wire rocker switch sits inside an Oval billet frame that's only 2-1/4" wide by 1-5/8" high. Adapt directly to positive (+) output remotes - no extra relays required! Single switch / frame, polarity reversing module, wire leads and instructions. Single switch w/ dimpled rocker L39BOS... $73.00 Single switch w/ paddle rocker L39BOSP... $73.00 Dual switch kit for center console mounting or for both switches on the driver door only. Dual switch frame is 3-1/8" wide by 1-5/8" high, (2) polarity reversing modules, wire leads and instructions. Double switch w/ dimpled rockers L39BOD... $ Double switch w/ paddle rockers L39BODP... $ Triple kit puts dual switches on the driver door and a single switch on the passenger door. Switches w/ frames, (2) polarity reversing modules, lots of wire and instructions. Triple switch kit w/ dimpled rockers L39BOT (shown)...$ Triple switch kit w/ paddle rockers L39BOTP...$ Our Most Popular Switches! L39BOT With New Compact Reversing Modules! NOTE: These are not plug-in replacements for 5-wire switches. Call if you have questions. Reversing modules are needed for power windows. Switches without modules will work for air-ride systems. NEW! Now you can add express up and down to one or all of your power windows. Check out our new Express Module on page 5 for details. 4 Door Power Window Kits In either oval or rectangle switch plates we can take care of your 4 door ride. These kits give the driver full control of all 4 windows and a single switch for the other 3 windows. Kits include instructions, polarity reversing modules and connectors. Prices shown are for our standard brushed aluminum finish. If you would like polished or black anodizing please call for pricing. L39BO4DR Oval 4 door P/W kit, with dimpled rockers...$ L39BO4DRP Oval 4 door P/W kit, with paddle rockers...$ L39B4DR Rectangle 4 door P/W kit, with dimpled rockers...$ L39B4DRP Rectangle 4 door P/W kit, with paddle rockers...$ L39B2/2-4DR 2 over 2 4 door P/W kit dimpled rockers...$ L39B2/2-4DRP 2 over 2 4 door P/W kit paddle rockers...$ Vintage Oval Billet 5-Switch Custom Panel Designed in conjunction with our friends at Vintage Air, this gorgeous 5-Switch Billet Panel exactly matches the size of their Streamline Gen-II Pro Panel. It measures 5-1/2" wide by 2-1/2" high and is available with your choice of switch functions as described above. Just let us know what you want to do and we ll set it up for you. The switches are rated at 5 amps max. so any necessary relays are sold separately. Includes 60" leads and hardware. Our panel has a fine tuned machine finish which can be easily polished if so desired. Dimpled rockers L39BVOX... $ Paddle rockers L39BVOXP... $ We can now polish our billet items. Call for details. watsons-streetworks.com Orders

5 Rectangular Billet Power Window Switches Billet 3-wire rocker switch inside a billet frame that's only 1-1/8" wide by 1-3/4" high. Adapt directly to positive (+) output remote controls - no additional relays required! Single switch / frame, polarity reversing module, wire leads and instructions. Single switch w/ dimpled rocker L39BS... $73.00 Single switch w/ paddle rocker L39BSP... $73.00 Dual switch kit for center console mounting or for both switches on the driver door only. Dual switch frame is 2" wide by 1-3/4" high, (2) polarity reversing modules, wire leads and instructions... Double switch w/ dimpled rockers L39BD... $ Double switch w/ paddle rockers L39BDP... $ Triple kit puts dual switches on the driver door and a single switch on the passenger door. Switches and frames, (2) polarity reversing modules, lots of wire and instructions. Triple switch kit w/ dimpled rockers L39BT... $ Triple switch kit w/ paddle rockers L39BTP... $ With New Compact Reversing Modules! L39BT L39BCD Clip with LED shown. LED sold separately. POWER WINDOW SWITCHES & PANELS Light Clip for L39B Switches This Clip secures to the switch frame mounting screws and holds your choice of 5/32" size LED (sold separately). The LED shines between the billet rocker and face plate of the switch. We recommend using one clip each for Single or Double switches, use 2 on L39BO4X 4-switch panel (you may use one Clip/LED per switch if you wish to achieve maximum illumination). L39B-CLIP (each)...just...$5.00 L18R/G/A-5/32, Red/Green/Amber LED (each)... $5.00 L18B-5/32, Blue LED (each)... $10.00 Console Plate Power Window Switch Kit 3 Our Billet 3-wire rocker switches inside an attractive Billet Console Plate that's 2-1/4" wide by 2-1/2" high with brushed finish. Add distinct styling in Billet to your custom console. 2 switches, Console Plate, 2 polarity reversing modules, wire leads, connectors and instructions. L39BCD (shown)... $ Paddle rockers L39BCDP... $ NOTE: These are not plug-in replacements for 5-wire switches. Call if you have questions. Reversing modules are needed for power windows. Switches without modules will work for air-ride systems. Switches and Console Plate without modules for SPDT applications up to 5 amps max. L39BCDX... $ Power Window/ Door Lock Combo Kits We have combined door lock control with our 3 wire switches to give you a clean look on your doors. The drivers triple switch plate controls the 2 front power windows and the door locks while the passenger gets a double for their power window and the door locks. All kits include polarity reversing modules for both windows and door locks, instructions, and connectors. Prices shown are for our standard brushed aluminum finish. If you would like polished or black anodizing please call for pricing. L39BOTDL Oval 2 door P/W and door lock kit, with dimpled rockers...$ L39BOTDLP Oval 2 door P/W and door lock kit, with paddle rockers...$ L39BTDL Rectangle 2 door P/W and door lock kit, with dimpled rockers...$ L39BTDLP Rectangle 2 door P/W and door lock kit, with paddle rockers...$ Let us build the custom switch panel you need. The 3 wire switches shown here are available as either momentary or on-off styles. Combine that with the rocker, faceplate and new finish options we offer, you can design a switch panel that is unique to your ride. Give us a call and we ll help you design just what you need then give you a price. All our custom switches can be supplied with relays and come with instructions. Finish options include Polished, Black Anodized, or Brushed Aluminum.

6 4 POWER WINDOW SWITCHES Grooved Dimpled Illuminated Billet 5-wire Power Window Switch Kits Now Available in Colored LEDs! Beautiful Billet 5-wire rocker switch snaps into a rectangular billet frame that's only 1-1/4" wide by 2-5/16" high. The frame mounts with (2) blind studs from behind. Single switch with plug and frame, terminals, wire leads and instructions. L39-5BS Dimpled... $87.00 Single Switch L39-5BSG Grooved... $87.00 Dual switch kit for center console mounting or for both switches on the driver door only. (2) Billet 5-wire rocker switches snap into a dual switch frame that is 2-1/4" wide by 2-5/16" high. The frame mounts with (4) blind studs from behind. (2) switches with plugs and dual frame, terminals, wire leads and instructions. L39-5BD Dimpled... $ Double Switch L39-5BDG Grooved... $ Triple kit puts dual switches on the driver door and a single switch on the passenger door. (3) switches with plugs, (1) single frame, (1) dual frame, terminals, fuse holder, wire leads, cross-over wiring and instructions. L39-5BT Dimpled... $ Triple Switch Kit L39-5BTG Grooved... $ Illuminated Billet 5-wire Power Window Switch Kits For 4-door Cars Beautiful Billet 5-wire power window switches now in kits for 4-door cars. Choose from the complete 4-door kit or a single location (console) 4-door switch kit. The Complete 4-Door Kit features a 4-switch driver s door control that measures 2-5/16" by 4-1/4" and (3) single switches that measure 2-5/16" by 1-1/4" wide for the other doors. Includes the cross-over wiring, switch plugs, terminals, fuses, fuse holders and instructions. The switch frames mount with blind studs from behind. L39-5B2/2-4D Dimpled... $ Door Switch Kit L39-5B2/2-4DG Grooved... $ The Single Location 4-Door Kit features a single location (console) 4-door switch control that measures 2-5/16" by 4-1/4". Includes the switch plugs, feed wiring, terminals, fuses, fuse holders and instructions. The switch frame mounts with (4) blind studs from behind. L39-5B4X Dimpled... $ Console 4 Door Switch Kit L39-5B4XG Grooved... $ NOTE: For this kit you will have to provide the plug-to-motor lead wires from the switch control on the console to, and into each door. We believe that these are the very best power window switches and kits available. This is the max in styling and comes from Watson's StreetWorks...of course. Power Window & Door Lock Switch Kit This new kit gives you a 3 switch panel for the driver s side so you can control you driver s and Passenger window along with door locks. The passenger side gets a 2 switch panel to control the passenger window and door locks. Switches are 5 wire so no polarity reversing modules or relays are needed. This kit includes the necessary crossover wiring, switch pigtails, connectors and instructions. Available with dimpled or grooved rockers. L39-5BTDL L39-5BTDLG Dimpled P/W and door lock 2 door kit.$ Groved P/W and door lock 2 door kit.$ Call us to discuss your custom switching needs! We can now polish our billet items. Call for details. watsons-streetworks.com Orders

7 Illuminated Billet Oval 5-wire Power Window Switch Kits Beautiful Billet 5-wire rocker switch snaps into an oval billet frame that s only 2-11/16" wide by 1-15/16" high. The frame mounts with (2) blind studs from behind. Single switch with plug and frame, terminals, wire leads and instructions. L39-5BOS Dimpled... $97.00 Oval Single Switch L39-5BOSG Grooved... $97.00 Dual switch kit for console mounting or for both switches on the driver door only. (2) Billet 5-wire rocker switches snap into a dual oval switch frame that is 3-1/8" wide by 2-1/4" high. The frame mounts with (2) blind studs from behind. (2) switches with plugs and dual oval frame, terminals, wire leads and instructions. L39-5BOD Dimpled... $ Oval Double Switch L39-5BODG Grooved... $ Triple kit puts dual switches on the driver door and a single switch on the passenger door. (3) switches with plugs, (1) single oval frame, (1) dual oval frame, terminals, fuse holder, wire leads, cross-over wiring and instructions. Oval Triple Switch Kit L39-5BOT Dimpled... $ L39-5BOTG Grooved... $ POWER WINDOW SWITCHES & EXPRESS MODULE 5 Illuminated Billet 5-wire Power Window Switch Kit, 4-Switch 2-over-2 Design Our beautiful Billet 5-wire power window switches now in a 2/2, 4-switch console design to run 4 different motors or a combination of items. The Single Location 4-Door Kit features a single location (console) 4-door switch control that measures 2-1/4" by 4". Includes the switch plugs, feed wiring, terminals, fuses, fuse holders and instructions. The switch frame mounts with (4) blind studs from behind. 2 Over 2 L39-5B2/2X Dimpled... $ Window Switch Kit L39-5B2/2XG Grooved... $ Also available as a custom switch panel that might combine power window controls, door lock/ unlock, power trunk lift control, electric latch releases, etc. There are lots of possible combinations, so plan ahead and discuss it with our staff. NOTE: For these kits you will have to provide the plug-to-motor lead wires from the switch control panel to, and into each door. Express Power Window Module Now you can enjoy the convenience of one touch windows on your vehicle. This compact unit mounts inside your door and works with all polarity reversing motors. Simply tap your switch once and the window travels all the way up or down. While in motion just give the switch another tap to stop mid-way. Works with your remote too. Each express module comes with connectors, heavy duty mounting tape and instructions. Each 3" by 2" by 1" module operates one window. PW-EXP Express Window Module... $45.00 NEW! Specialty Power Window s Wonder-Lift Window Kit This is SPW s universal, flat glass kit including OEM motors, rugged risers, motor plug and leads, bottom window channels and mounting material, support brackets, written and video instructions. 8-1/2" clearance is needed below the bottom of the glass. Riser can be shortened for your application. Lifetime Warranty from Specialty Power Windows. 2-doors. Works with all of StreetWorks Power Window Switch Kits. PW-L2P...$295.00

8 6 CRANK HANDLE POWER WINDOW SWITCHES NEW! Power Window Switches for Original Crank Handles Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window. Comes in either 3/8" square shank for Ford/Mopar, pre-49 GM Spline or 49-up Ford & GM. 2-Door kits from Carolina Custom. CA-EPWS-F Square Shank...$ CA-EPWS-GM Pre-49 Splined...$ CA-EPWS Up Splined...$ Window Crank Handles by Trique Manufacturing These handles represent a modern take on a nostalgic look. Each handle is precisely water-jet cut from stainless steel then polished to a beautiful luster. The base, cap, and knobs are machined billet aluminum and fully polished as well. The cover cap is held in place with a strong magnet offering a secure fit while allowing removal. Sold in pairs. Each pair comes with universal mounting hubs that work on 1/2" and 7/16" splines, as well as 3/8" square shafts. Handle base is 3/4" tall. Pair of Trique Mfg Salt Flat style crank handles Salt flat style crank handle is 4-3/4" long TQ-SF02...$ Dual Power Window Controller Control both front widows from the drivers switch! Crank handle switches are great but not when the driver can t control the passenger s window. Leave it to Watsons StreetWorks to finally come up with a solution. Mount this dual controller box under your dash and run wires to both front doors. The passenger switch functions normally until the driver takes over. The drivers switch operates in 3 modes. By just holding the switch up or down the driver s window responds normally. If the driver first gives the switch a single quick tap it is now controlling the passenger window for the next 20 seconds. By giving the switch 2 quick taps BOTH windows operate together for the next 20 seconds. The unit returns to normal function after the 20 seconds. Works with all power window switches, not just crank handles. Install into your new build or retro-fit into existing builds. Have your windows operating from a remote? This unit works with the remote as well so you can control both front windows with just 2 buttons on the remote. Includes built in relays, enough wire to reach both doors, connectors and instructions. P-PWC Dual power window controller...$ Pair of Trique Mfg Banjo style crank handles Banjo crank handle is 5-1/2" long TQ-BJ02...$ Vent window crank handle is 3-3/4" long TQ-BJ03...$ Vent window crank handle is 3-1/4" long TQ-SF03...$ Door Handles by Trique Manufacturing These handles represent a modern take on a nostalgic look. Each handle is precisely waterjet cut from stainless steel then polished to a beautiful luster. The base, and cap are machined billet aluminum and fully polished as well. The cover cap is held in place with a strong magnet offering a secure fit while allowing removal. Sold in pairs. Each pair comes with universal mounting hubs that work on 1/2 and 7/16 splines, as well as 3/8 square shafts. Handle base is ¾ tall. Pair of Trique Mfg Banjo style door handles. Banjo door handle is 5 1/8 long TQ-BJ01..$ Pair of Trique Mfg Salt flat style door handles. Salt flat style door handle is 4 3/4 long TQ-SF01...$ We can now polish our billet items. Call for details. watsons-streetworks.com Orders

9 Very Popular! Basic Auto Electricity for Street Rods Basic Auto Electricity Book Don t feel comfortable with electrical wiring? Would you like to understand it all better? Then this book is for you. It contains sections on: What is Electricity? - the battery, alternator, voltage regulator, grounding Designing a simple circuit - selecting components, connectors & terminals, Series and parallel circuits, relays Designing an Electrical System, doing circuit tracing Circuit Diagram Ammeter and Volt Meters - hookup and how to read them Handy relay circuits, Quick Tips... And More! A full 48 pages. Plus Foldout Circuit Diagram. Plus an 8-1/2" by 14" Pullout Wiring Diagram that you can remove and customize to match your own car s circuits. BAEB... Only...$7.95 Now in its 11th Printing! USB Charger Port and Voltmeter Charge your phones or other devices while you re on the road. This handy device is also a voltmeter. Checks alternator output and battery strength $19.95 Power Port with Billet Plug accepts a threaded knob to match your interior. USB CHARGERS & BATTERYJUMPER STUDS Dual Port USB Charger with LED Display This beautiful Billet USB Charger and volt meter will charge 2 phones or other devices while you re on the road. It measures 1-¾" dia. at the face, Mounts on your dash or in your console with a 1-½" hole and requires 2-½" of back space. The blue LED display shows the vehicle s voltage when not charging or shows the amps and volts being supplied to the device being charged. Both 5 volt ports are high output, capable of pushing 2.4 amps per port. Available in a brushed or polished aluminum finish. Includes wires, mounting bracket with screws and instructions. WI-USB. Dual port USB charger with Brushed billet finish... $69.00 WI-USBP Dual port USB charger with.polished billet finish... $74.00 Staying old school with your interior but need to charge electronics? This power port from StreetWorks comes with a billet plug and threaded stud to accept any knob you choose.(knobs sold separately) Then simply plug in any charger or other device the gets its power from an old school cigarette lighter The power port mounts in a 7/8" hole, comes with insulated terminals and instructions. B23 Power Port with Billet Plug...$28.00 B23P Billet Plug Only w/stud & o-rings...$ Knobs sold separately. See page 12. Battery Power Jumper Studs With your battery hidden in the trunk or elsewhere These jumper studs are a must. The heavy duty, solid brass contact posts are 13/16" in diameter and over an inch tall. The come with the black and red insulator covers. We include them with a bracket by Sachse Rod shop to complete the package and make installation a snap. The 1/8" galvanized steel bracket is 5" long and comes with mounting screws. WI-BJS. Battery Jumper studs with bracket...$60.00 Battery jumper studs are available in pairs without the bracket. They require a 1-¼" hole for mounting the Insulators Pair of Jumper studs...$42.00 SA Bracket only...$20.00

10 8 LIGHTING 6-LED Interior and Marker Lights Great little 6-LED lights have a variety of uses. They are 1-13/16" diameter overall and mount in a 1-3/8" diameter hole. Red and ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring. L96RR Red LED s/red Lens... $22.00 L96RCL Red LED s/clear Lens... $22.00 L96YY Amber LED s/amber Lens... $22.00 L96BCL Blue LED s/clear Lens (interior use only)... $22.00 L96YCL Amber LED s/clear Lens... $22.00 L96WCL White LED s/clear Lens... $22.00 Bright Blue Illuminator LED Made in the USA! Bright enough to light up your glove box or ash tray, add accent lighting inside or out. Very small - installs into a.156" hole. Pale blue color provides a nice hue at night. NOTE: This LED is too bright for use as an indicator light! See our other LED Indicators on page 34. L18BRB-5/32 (12vdc, each)... $12.00 Exclusively from StreetWorks! 3-LED Interior and Marker Lights These bright little 3-LED lights have a variety of uses. They are 1" diameter overall and mount into a 3/4" diameter hole. Reds and ambers are SAE/ DOT rated as clearance lights. Provided with an optional stainless steel trim ring. L86RR Red LEDs/Red Lens...$17.00 L86RCL Red LEDs/Clear Lens...$17.00 L86YY Amber LEDs/Amber Lens...$17.00 L86YCL Amber LEDs/Clear Lens...$17.00 L86BCL Blue LEDs/Clear Lens (interior use only)...$17.00 L86WCL White LEDs/Clear Lens...$17.00 Bright White Illuminator LED For interior accent lighting (not for courtesy or dome lights), license plate lights (2 minimum recommended), glove box, ash tray, etc. Bigger / Brighter than the Bright Blue LED. Snaps into 1/4" hole. NOTE: This LED is too bright for use as an indicator light! See our other LED Indicators on page 34. L18BRW-1/4 (12vdc, each)...$12.00 Bright White or Blue Low Profile Illuminator LED These are BRIGHT little devils! Just 3/8" square, these can actually be used for under-dash courtesy lighting (a couple recommended). Easily attached with the double sided adhesive (included) and flexible 3" strip for easy mounting. 24" wire leads. These are bright and versatile with lots of uses. L91B Blue,12vdc (each)... $12.00 L91W White,12vdc (each)... $12.00 Glove Box/Trunk Tilt Switch Turns on lights in your glove box, trunk or under your hood. Kit includes the switch, mounting screw and bright white LED strip. Tilt switch has a clear plastic housing to check its operation. LED strip has adhesive tape for easy mounting. L03 Complete kit is shown... $24.95 L02 Tilt switch only... $19.00 Courtesy Light Kit Our new, improved courtesy light kit has hidden switches. This kit includes 2 of our 2" cool white LED strips, 2 of our new magnetic door jamb switches, connectors, wire and instructions. Hide this slick switch on the pillar and the magnetic trigger in the door. Both pieces are paintable and mount in a 3/4" hole. The switch is rated at 2 amps and has a maximum working distance of 3/4". IL-04 Complete 2 door kit...$55.00 SW-04 Magnetic door switch with trigger, each...$20.00 Watson s StreetWorks Orders Fax

11 INTERIOR LIGHTING PLUS 9 We love these LED strips and thought you would too. Waterproof LED strips by the inch! The lights are encased in a clear waterproof plastic so use them where ever you want. Available in red, amber, blue, cool white and warm white. Each strip comes with an adhesive tape backing and mounting clips. (not shown) Use a 2" warm white strip as a glove box light. Or a couple of 36" blues to light up the underside of your ride. We ve got them priced in 2" segments (3 lights per segment) All colors are the same great price. Choose your color & length then find the part number in the grid. Prices for each length are along the bottom. LENGTH Color 2 inch 4 inch 6 inch 8 inch 10 inch 12 inch 18 inch 24 inch 30 inch 36 inch Warm White Cool White Blue Amber Red Price $8.00 $12.50 $17.00 $21.50 $26.00 $30.50 $44.00 $57.50 $71.00 $84.00 Replacement LED bulbs 36mm festoon white LED, each #IL-85..$ mm Festoon white LED, each #IL-82 $6.00 BA9 Bayonet style bulbs, choose a color: Amber IL-57A, Blue IL-57B, Green IL-57G, Red IL-57R, or White IL-57W $8.00/pair Blade style bulbs light in all directions, choose a color: Amber IL-194A Blue IL-194B, Green IL-194G, Red IL-194R, or White IL-194W $8.00/pair Clear Lens Lights - Now with LED Bulbs Stylish lights for interior or decorative use, 1-7/8" by 1-3/8" oval. Snap into 1" round hole from front. Internally plated for reflectivity. Twist in socket with #194 bulbs (clear included). Waterproof. Not for taillight or turn signal use. Dual Intensity Converters Use these clever converters to make any of our LEDs behave like a dual intensity bulb. (For example running light/brake light.) L-JE03..Dual intensity converter for 1-15 individual LEDs..$5.00 L-JE02..Dual intensity converter for 16+ individual LEDs..$5.00 LED Dimmer Switch LED s are great but when you add a dimmer to the circuit you can have problems. This little electronic dimmer switch can handle up to 6 amps of lighting. It works with both LED s and conventional bulbs. ¼" shaft dia., 7/16" mounting hole. Requires 1-¾" backspace. Press on black plastic nob included. Note that the lighting circuit needs an isolated ground to work properly. WI-DIM....$40.00 IL-53 Pair of clip in lights with LED bulbs $29.00 L53N Pair of clip in lights with #194 bulb (not shown).$26.00 Also great for kick panels and doors!

12 10 INDICATOR LIGHTS HOT! Low Profile LED Indicators Match our L75 Series Switches Available in 2 sizes - 5/16" or 15/32. Bezel Diameters are 7/16" & 5/8" SMALL Blue $8.00 Green $8.00 Red $8.00 Amber $8.00 White $8.00 LARGE Blue $10.00 Green $10.00 Red $10.00 Amber $10.00 White $10.00 Chrome Bezel LED s Attractive Chrome Bezel is approx. 9/16" dia. by 7/32" high when installed. Mount in 7/16" dia. hole. 12 vdc. With grounding terminal. Green, red or amber. Recommended for interior use only. Not bright enough for signals. Hot! And now in Blue! A Great Look! L66G/R/A (each)...$9.00 And now in Gorgeous Blue! L66B (each)...$11.00 COWEL VENT, A/C VENTS, WIPER MOTOR Very Popular! With Adjustable Rod End! Power Cowl Vent Kit Made in the USA! LED Indicator Lights (5/32") round LED s mount in 0.156" hole. Use for turns, high beam or power indicators. 12 vdc. Green, red or amber. L18G/R/A-5/32 (each)...$5.00 L18B-5/32 Blue! (each)...$10.00 (1/4") round LED s mount in 0.250" hole. 12 vdc. Green, red or amber. L18G/R/A-1/4 (each)...$5.00 L18B-1/4 Blue! (each)...$10.00 Give your cowl vent a lift with this powerful gear motor kit that comes complete with gear motor, brackets, hardware, interior switch, wire, connectors, and instructions. Steel bracket for cowl can be bolted or welded. Attractive 5" aluminum rod arm gives a clean look. Motor with mounting bracket and lever arm measure 2-1/2" wide by 4" high and 3-1/4" deep including motor, not including 5" connecting arm. Motor has 10 lbs. of push/pull and 2" travel. Also works for power glove box door. Not waterproof. L34 Power Cowl Vent Kit...$ L34M Motor Only for your project...$50.00 Compare at $ $ Our Cowl Vent Kit is a Steal! Air Conditioning Vents from Trique Mfg. The folks at Trique Manufacturing turn out some beautiful parts. We thought you d love these A/C vents as much as we do. Each vent housing is machined from billet aluminum and has polished stainless steel vents that swivel. They each accept a standard 2-½" A/C hose and come with mounting brackets & hardware. You will need at least 0.8" of clearance behind each vent. Triangle vent Bezel size: 4" x 2" TQ-AVT $75.00 Single Oval vent Bezel size: x 1.75" TQ-AVO $70.00 Round vent Bezel size: 2.75" dia. TQ-AVR..$75.00 Dual Oval vent Bezel size: 7.5" x 2" (uses 2 separate vent hoses) TQ-AVDO $ Rectangle vent Bezel size: 3.5 x 1.2" TQ-AVRE $75.00 Watson s StreetWorks Orders Fax

13 FIREWALL PASS THROUGHS & LOKAR 11 Made in the USA! Billet Wire Port Dress up your firewall where the wiring harness goes through with our Billet Wire Port. Main body is 2" dia. by 1-1/2" inside dia. Secures to the firewall with four (4) truss head screws. A 1" by 13/16" deep cutout in the body allows the wire bundle to exit close to the firewall. Rubber grommet included for smaller wire bundles. Cover has three (3) ball-milled grooves. Allows the wire bundle to be installed before the final attachment of the Wire Port. Overall height is 1-3/16". Attractive, functional and at a very reasonable price. Photo shows assembled Port at upper left and parts to right. B16 (each)... $46.00 Billet Wire Passthrough Back View A really attractive way to dress up the area where the wires come through the firewall. Unit measures 1-1/2" wide by 2" tall by 1" deep with a wire exit size of 1" wide by 3/4" deep. Blind fastens from behind for that smooth look. Hardware included. B21...$49.00 Billet ECU Wire Pass Through This wire pass through was designed with large Fuel Injection harnesses in mind. An attractive cover with machined grooves dress up where the wire bundle comes through the firewall. Modern LS and coyote engine management systems have large connectors that won t fit through a normal grommet. This unit covers a firewall hole as large as 3-3/4" by 1-3/4". The pass through comes with a custom fitted grommet with a 1" precut split top hole for ease of installation and can be trimmed. It can be opened up to a maximum of 1-5/8". The design of the pass through allows this piece to be added onto a completed vehicle with minimum effort. Overall dimensions are 4-5/16" tall x 2-1/4" wide x 2-1/8" deep at the base. WI $89.00 Pedal Covers & Dip Sticks by Lokar Mini Oval Billet Aluminum Throttle Pedal The throttle pedal is spring-loaded with a removable lower arm that is splined for versatility and can be mounted to the right or left of the mounting bracket. The shaft and arm are one piece requiring no pins. Rubber inserts provide foot traction for safety. Brushed aluminum finish. BAG-6103.Mini oval throttle pedal $ Oval Billet Brake Pad is designed with a 1/2-20 thread and includes a 1/2-20 stud in the kit. Can be mounted centered or off center. Rubber inserts provide foot traction for safety. Brushed aluminum finish. 1-¾" x 3-3/8".BAG-6106 Mini oval brake pedal pad $46.00 Billet Adjustable Foot Rest This foot rest lets your left foot sit comfortably without wearing your carpet. It is adjustable for foot comfort. Oval pad with rubber inserts and brushed aluminum finish matches the other Lokar pedals. 1-3/4" x 3-3/4" BFR-6114 Foot rest..$69.75 Other Lokar pedals are available as special order. Check out our website to see all the cool Lokar dipsticks we offer. From flatheads to LS7 s Lokar has a dipstick to fit. A/T fluid dip sticks too. Oval Billet Dimmer Switch Cover Slips over your floor mounted dimmer switch and secures with a set screw. Rubber inserts provide foot traction for safety. Brushed aluminum finish. 1-3/8" x 2-3/8" BAG Oval dimmer switch cover.. $23.75

14 12 COLUMN SWITCHES & LEVERS StreetWorks offers a full range of column dress up levers and knobs in two distinct styles. Both styles have levers that fit GM style columns. Tilt Levers Each lever has ¼-28 threads at the base. The nob is polished aluminum with a stainless steel arm. Switches are rated at 3 amps maximum. Add relays for controlling higher amperage circuits. Traditional Contemporary L33... $46.00 Tilt lever with on/off switch L33G... $46.00 L33M... $46.00 Tilt lever with momentary switch L33GM... $46.00 L33S... $18.00 Tilt lever without switch (not shown) L33GS... $18.00 L33D... $60.00 Hi/low beam trigger. We add an on/on relay with a momentary switched arm L33GD... $60.00 Turn Signal Levers Each lever has a flattened base and attaching screw. The nob is polished aluminum with a stainless steel arm. Switches are rated at 3 amps maximum. Add relays for controlling higher amp. circuits. Traditional Contemporary L43... $55.00 Turn lever with on/off switch L43G... $55.00 L43M... $55.00 Turn lever with momentary switch L43GM... $46.00 L43S... $20.00 Turn lever without switch L43GS... $20.00 L43D... $67.00 Hi/low beam trigger. We add an on/on relay with a momentary switched arm L43GD... $67.00 Vintage Air Style Dress-Up Knobs Knobs to match your Vintage Air Control unit. Designed with Vintage Air. Hazard & Shift Knobs Complete your column dress up with shift and hazard switch knobs. Like our levers these knobs are polished aluminum. The shift lever knob has a.333" dia. hole to fit onto your GM shift lever. The Hazard knob has a 6/32 stud. Traditional Contemporary L44... $12.00 Column shift knob L44G...$12.00 L45... $10.00 Hazard knob with L45G...$ threaded stud Matching Dress-up Knobs These knobs will complete your dash. They are available with 3 hole sizes. Traditional Contemporary B14TN-3/16... $8.00 Fits 3/16" shaft B14GN-3/16...$9.00 B14TN-1/4... $8.00 Fits ¼" shaft B14GN-1/4...$9.00 B14TN $8.00 Fits threads B14GN $9.00. B14VN-3/16 For 3/16" shaft (each)...$ B14VN-1/4 For 1/4" shaft (each)...$ B14VN thread (each)...$12.00 Watson s StreetWorks Orders Fax

15 ALUMINUM TRIM 13 Round Hole Brake & Clutch Trim Perfect for round pedal shafts. Fits floor dimmer switch. Use around wires, hoses, harnesses, etc. 2-1/4" diameter with a 15/16" diameter hole. Stainless steel screws. Rubber gasket. Solid machined part or our Split n Pinned trim. B01 Solid... $15.00 B01S Split n Pinned... $19.50 I m a machinist and could make them myself but you can t beat it for the price. ~ Bill, Illinois Oval Hole Brake & Clutch Trim The right part for elongated or rectangular pedal shafts. Also trim the firewall for accelerator cable and kick down or for some TPI applications. 2-1/4" diameter, 5/8" by 1-1/8" hole, stainless steel screws, rubber gasket. Solid machined part or our Split n Pinned trim. B02 Solid... $15.00 B02S Split n Pinned... $19.50 Oval Hole/Oval Body Brake & Clutch Trim Great new Oval shaped body for elongated or rectangular pedal shafts. Also trim the firewall for accelerator cable and kick down or for some TPI applications. 1-5/8" by 2-1/4" wide. 5/8" by 1-1/8" hole. Stainless steel screws. Rubber gasket. Split n Pinned trim or Solid Oval. B02OVS Oval Split n Pinned... $24.00 B14OV-PLT Solid Oval trim - not split... $17.00 Exclusively by StreetWorks Steering Column Trim Split n Pinned by StreetWorks Easy-install Split n Pinned design - no column removal required. Ring is 3.420" I.D. / 4.800" O.D. Stainless steel screws. Rubber seal has an opening to fit GM and other columns measuring 1-3/4" to approximately 2-1/8" diameter. (Trimming required for larger diameters.) Now including a 1-1/2" I.D. grommet to fit smaller diameter columns! Excellent for roll cage passthroughs on trucks! B03N (complete as shown on left in photo)...$39.00 B03S (Rubber Seal, Only)...$18.00 B03R (Aluminum Ring w/screws, No Seal on right)...$25.00 B03G (1-1/2 I.D. Grommet, Only)...$2.50 Pass Through Trim Brake Pedal Hole Trim Plate For wire bundles, harnesses, cables, etc. Insulated rubber grommet with 5/8" I.D. Overall size is 2-1/4" O.D. Solid aluminum piece. Stainless steel screws. B05 Solid (as shown)...$15.00 Split n Pinned version has smaller #4 screws closer to the outer edge to cover a hole up to 1-5/8" wide. B01ST Split n Pinned (not shown)...$24.00 From our friends at Sachse Rod Shop. Each piece is 2" by 4" with a 1/2" wide slot. Overlapping feature allows the slot to be 1-1/4" to 2 long. 18 gauge steel. Pre-drilled holes and stainless screws. Helps make installation very simple. SA plate pieces and 4 screws... $12.00

16 14 HINGES PLUS Billet Trunk Hinge Kit Billet Trunk Hinge Kit from Carolina Custom T-6 aluminum hinges. Decorative ball milled design. Stainless steel attaching screws. Includes installation kit with 36" bracket (part in photo is smaller for photographic purposes, bracket may be shortened to fit your specific application), pivot pins, and tabs for pivot pins. Instructions. CA-BTHK Full Kit (as shown at left)...$ Steel Hinge Kit No visible welds when installed. Stainless steel attaching screws. Includes installation kit with 36" bracket (part in photo is smaller for photographic purposes, bracket may be shortened to fit your specific application), pivot pins, and tabs for pivot pins. Instructions. CA-STHK...$ The Small Hinges measure 5-5/8" high by 6" wide as shown and the Large Hinges are 7-1/8" high by 8" wide as shown in a typical closed position. Billet Hood Hinges On Firewall Through Firewall Bilt-Rite hinges from Sachse Rod Shop separate the surfaces while pivoting open T-6 aluminum. Use in any vertical attachment application like hoods, trunks, tilt front ends, pickup tonneau covers, etc. SA-BH (large, pair)...$ SA-BHSM (small, pair)...$ # & 200# Power Trunk Lift Kit From Carolina Custom. Uses an industrial linear actuator for power - not just a window regulator. Works through a single pivot hole so there s no ugly slot in your trunk upholstery. Only the billet arms and trunk bracket show when installed. Has all the hardware, brackets, arms and switch (not shown). The steel frame is designed to be able to install on either side of the trunk. CA-PTL # actuator... $ CA-PTL # actuator... $ Carolina Custom... a name you can trust for quality. 3 Position Self-Locking Hood & Trunk Prop Constructed of high quality billet aluminum and stainless steel, this 3 position Hood and Trunk Prop will offer great looks, as well as functionality to your ride. When the hood or trunk is raised, the Prop will automatically lock itself into position for easy one handed operation. A quick release allows the hood to be opened to its max for easy engine or trunk access Prop Rod.$79.00 Watson s StreetWorks Orders Fax

17 LATCHES AND CATCHES 15 Trunk Lid Latch We ve seen this neat little latch showing up on some of the most eye-catching rods. Cable release ready receiver measures 2-3/8" by 3-5/16" wide. The spring loaded stud is 2-3/4" long, overall, and the adjustable spring loading helps to pop the trunk lid up. The latch has a built-in safety feature requiring cable tension for the latch to close. Finished in zinc yellow chromate. You'll have to fabricate brackets/supports for attaching both pieces but we know you can do it! D04 Trunk Lid Latch w/stud... $50.00 Hood Latch with Safety This cable operated hood latch has an integral safety to prevent your hood from lifting while you re driving. The base measures 2-3/8" by 4-7/8" while the upper pin/safety is 1-3/8" by 5-1/8". The spring loaded pin is adjustable. Like our trunk latch you will need to fabricate mounts. Finished in zinc yellow chromate. LH-02...$65.00 Trunk/Hood Latch and Striker This little beauty is called a Rotary Claw Latch. It's spring loaded slams shut and can be used in a variety of applications like trunks and hoods. Measures 1-7/8" high from the mounting surface to the top, 1-1/4" from the mounting surface to the striker center and the attachment holes are 3-1/4" center-to-center. Finished in zinc yellow chromate. Latch has cable release mechanism below the mounting surface. Releases very easily, so it is great for electric actuator release. Striker included. D03 Trunk/Hood Latch and Striker... $39.00 Billet Knob Cable Release A straightforward, attractive machined billet knob with a 120" cable so you can open your hood or deck lid. Top quality aircraft cable and durable housing may be cut-to-length. Includes housing end cap, no-fray cable stop and 3 cable clamps. Made in America by Control Cables Inc. CC-UB10...Only...$32.00 Also available with a solid stainless steel wire cable for push-pull applications like carb choke. CC-UB10S... Still Only...$32.00 Single Lever Cable Releases Machined billet aluminum lever release. Top quality aircraft cable and durable housing may be cut-to-length. Includes housing end cap, no-fray cable stop and 2 cable clamps. Made in America by Control Cables Inc. in 2 lengths. CC-S7 7 foot cable... $60.00 Or for deck lids and longer needs (4 cable clamps). CC-S15 15 foot cable... $65.00 Double Lever Cable Release The same attractive machined billet aluminum construction with 2 release levers - one has an 84" cable and one a 180" cable so you can open both your hood and deck lid. Top quality aircraft cable and durable housing may be cut-to-length. Includes housing end caps, no-fray cable stops and 5 cable clamps. Made in America by Control Cables Inc. CC-D $ No-fray end cable stop (as seen in the top photo, above). CC-STOP (each)... $5.00

18 16 GATOR JAW LATCHES Gator-Jaw TM Latches Medium size single rotor trip latches meet all Federal Vehicle Safety Standards. Rated for 750 pounds of holding force. L shaped release lever, release from either down or horizontal pulls. Latch body is 3-7/8" by 1-1/4" by 13/16". 1/4-20 threaded holes. L24 Latches & Striker Bolts (Pair)...$64.00 Mounting Plates L24M Mounting Plates with Screws (Pair)...$34.00 Baby Gator-Jaw TM Latches We designed them don t mess with a Copy-loc! Space saver small single rotor trip latches for tight spots. Latch body is 2.50" by 1.13" by 0.53". 1/4-20 threaded holes. Full 750 pound load rating. With L shaped release lever. Striker pins (5/16-18 thread) included. Also use for hoods, deck lids and panels where traditional latches won t fit. L24E Latches & Striker Pins (Pair)... $56.00 Mini weld-in Mounting Plates L24EM Plates with Screws (Pair)... $49.00 Cage Nuts for Medium Size Latches Locking Gator-Jaw TM Latches Locking medium size, single rotor trip latches and strikers. Meets all Federal Vehicle Safety Standards. Rated for 750 pounds of holding force. Push the lock lever down and the latch is locked, up and it's unlocked. Works perfectly with lock actuators and remote controls and/or with interior door lock buttons such as on many new cars. The door must be closed before locking. Mounting Plates sold below. L24LK Locking Latches & Striker Bolts (Sold in Pairs only)...$ Provide additional adjustment for the striker of the medium size striker. Help where you can not reach a nut on the striker bolt. Bolt-in. For strikers with 3/8-16 thread. L24CN (Pair)... $21.00 Stainless Striker Bolts for Medium Size Latches Rust free good looks. 1/2" Dia. by 3/4" shank stainless steel shoulder bolt with 3/8-16 by 5/8" long thread. Head is 3/4" Dia. by 5/16" high. S24B (Pair at right)... $ /8" Long S/S Striker Bolts For cars with a larger door-to-jam gap. Fits the Dearborn Deuce. S24B-7/8 (pair at right)... $40.00 Oval Billet Aluminum Interior Door Handles, Pair As soon as I saw these sleek looking interior door handles I knew they were going into my project car. We think you ll like them too. Each pair of handles comes with the mounting brackets you ll need to mount them to your door panel. Connect them to your door latch with the cable release kit listed below. Made by Lokar so you know they re quality. We offer them in Polished or brushed aluminum. IDH-2000 Pair of Polished flush interior door handles... $ IDH-2001 Pair of Brushed finish flush interior door handles... $ Universal Door Latch Cable Release Kit Use this cable release kit to connect your Lokar handles to your door latches. The shield pulley keeps the cable on track. Comes with everything you need to do 2 doors. DLR $59.00 Watson s StreetWorks Orders Fax

19 LATCH RELEASES 17 Neat Nobs Latch Release Kits The simple, neat way to open Gator-Jaw style latches from the inside. Attach the release nob directly to the latch or use our remote kit to mount away from the latch. A simple downward push of the nob actuates the latch and opens the door. The trim ring and nob are easy to install and provide a smooth, clean look. Neat Nobs are the perfect inside latch release. Round Trim Neat Nobs The original round trim plate is 2-1/4" Dia. Stainless Screws. Smooth, Turned, Ball Nobs. B14S Smooth Nobs (left in photo at right)... $50.00 B14T Turned Nobs (center in photo at right)... $50.00 B14B Ball Nobs (right in photo at right))... $50.00 Oval Trim Neat Nobs Thin Oval Neat Nob Kits What a neat little piece for opening Gator-Jaw style latches. The thin oval is just 1" wide by 1-5/8" tall and comes with your choice of (3) nob styles - a smooth nob, a turned nob or our new polished ball nob (1" diameter for easy handling). The trim oval mounts with stainless steel screws, provided. Sold in 2-door kits. B14NOS (with Smooth Nobs on left in photo)... $50.00 B14NOT (with Turned Nobs in center in photo)... $50.00 B14NOB (with Ball Nobs on right in photo)... $50.00 B14NO-PLT (Thin Oval Trim Plate only w/screws, each)... $17.00 Neat Lever Latch Release Kit How about a Lever Latch Release? As Installed The trend in interior design - oval. Plates are 1-5/8" high by 2-1/4". Stainless Screws. Smooth, Turned, Ball Nobs. B14OVS Smooth Nobs (left in photo)... $50.00 B14OVT Turned Nobs (center in photo)... $50.00 B14OVB Ball Nobs (right in photo)... $50.00 B14OV-PLT Oval Trim Plate only w/screws, each... $17.00 We ve got that, too! This 2-door kit has the billet levers (1-5/8" L by 3/4" W by 5/8" H), cable, connectors, bell-crank, studs and hardware for mounting and attachment to your Gator-Jaw style latch. B19 (at far left)... $50.00 The same great kit but with our Chili Pepper Levers. B19-CPL... $50.00 As Installed Neat Knob Remote Install Kit Install Neat Nobs away from the latch, forward on the door where the original inside handle was with this kit. A T lever and cable attach to the latch. A simple push on the nob actuates the latch. Works in either steel or fiberglass cars and has all of the hardware you need to connect a Neat Nob kit to gator-jaw style latches. Detailed drawing and written instructions included. B14R Neat knob remote install Kit...$14.00 Cable Installation Kits for Latch Releases Get all the pieces to help you connect your latch and latch release. 6+ feet of cable and sheathing (cut to length for 2-doors), 8 plastic clips, screws and nuts. Compression sleeves (fixed end) and cable adjusters. B20C for 2-doors...$20.00 Machined Aluminum Ends - Stainless Steel Rods Door Prop Rod Carolina Custom s Slick Rod for holding doors open at shows. Secure attachment to your Gator-Jaw style latch. One end fits over the striker bolt, the other end locks into the latch. Fits any of the three popular sizes of latches. CA-DRP4 (Pair)... $65.00

20 18 STREETWORKS SOLENOIDS PLUS StreetWorks Door Solenoids More power. Fast action. 40 pounds of pull. Work with original latches. Solenoid and bracket measure 2-3/4" wide by 2-1/16" high (thick) by 4-1/4" long. Solenoids, cables, pulleys, connectors, wire, hardware and instructions. L22N 2 Door Set Up, (Shown)...$ L22NS 1 Door Set Up...$85.00 L22NX 2 Solenoids w/brackets Only...$ L22NSX 1 Solenoid w/bracket Only...$75.00 L22C Cable Kit Only, Single Door...$11.00 The whole job from start to finish went perfect because of the quality of your Solenoid kit. You can buy less expensive stuff but you sure couldn't duplicate the quality/power/durability of your product. I guess that's when less expensive becomes Cheap!! Gear Motor Actuator For rotarytrip style and some original latches made after about Measures 5-1/4" l by 2-1/4" h by 1-1/8" d. Tested at 13 pounds of pull to trip a latch. It s reversible so it can also be used for door lock/unlock. 7/8" travel. 4-5 amp draw. With the mounting hardware shown. L29 (each)...$27.00 L29X (actuator only, each)...$23.00 Power Safety Lock Pins An absolute necessity for suicide doors. Quality aluminum body. Stainless steel lock pins, knob shaft and hardware. Slim 1-3/8" thick by 2" tall by 8" long. Built-in micro switches for a warning light. Light included. Installed in doors or kick panel area. Simple installation. Plastic bushings and knobs. Use with remote and/or power window switches included. NSRA Best Safety Product 1999 made by Carolina Custom. CA-PDL (pair)...$ Low Profile! Just 2-1/16" High! As Seen On Trucks TV and Gearz! This spring can apply a pre-load tension on really tough latches. Booster Spring For really tough latches that need an extra boost to open. Spring provides a pre-load on the latch mechanism so that less force is needed to release the latch. 4-1/2" long zinc plated high-carbon steel spring pounds/inch of force. Cable connector allows you to adjust the pull to your needs L22-BS 1 spring and connector... $7.00 Manual Safety Lock Pins Manual version of the above. Quality aluminum. Stainless steel lock pins, knob shaft and mounting hardware. Slim 1" thick by 2" tall by 3-1/2" long. Built-in micro switches for a warning light. LED included. Installed in doors or kick panel area. Simple two screw installation. Plastic bushings and knobs. NSRA Best Safety Product 1988 made by Carolina Custom. CA-MSP (pair)...$79.00 Billet - Chili Pepper Levers For Manual and Power Safety Locks or other applications with a 1/4" shaft. Each piece is 1-5/8" by 3/4" with a ball-milled vein, gently curved with a right hand and left hand piece. With set screws, for 1/4" shafts. B-CPL (RH/LH Pair)...$35.00 Spice up your life... put some Chili Peppers in your car! Billet Tear-Drop Levers Beautiful billet aluminum levers. Fit 1/4" shaft. Replaces the plastic knob on releases above. With set screws. B-RHL (pair)... $35.00 Watson s StreetWorks Orders Fax

21 DOOR WIRE LOOMS 19 Spring Loaded Door Popper 5" overall length as shown. 1-5/8" plunger, can be shortened. Maximum push at full plunger depression is 15 pounds force. With mounting plate and screws. Push plate to protect paint with 3M tape for attaching. SP-DP (each, as shown)... $24.00 Stainless Steel Braided Door Wire Looms Stainless Steel Braided Door Wire Looms for Suicide Doors These wire looms can open to more than 200 degrees and not bind! Swivel ball bushings assure smooth operation. 1/2" O.D. by 3/8" I.D. by 7+" length, plastic lined S/S Braid. New Quick Collar ends. Ball swivel flange end mounts vertically and is just 2" high. TP-SUICIDE (2 door pair)...$80.00 We ve tried our darnedest to force these to bind but they won t! They ll work great on non-suicide doors, too. The added look of stainless braid, the door looms are 1/2" O.D. by 3/8" I.D. by 7+" effective length. One fixed and one sliding aluminum boss. Plastic lined. Mount into 3/4" Diameter holes with set screw secured quick collars. TP-SSDWL-1/2 (2 door pair as shown)... $40.00 These products are proudly made in America by our friends at G & J. Nylon and Billet Door Wire Looms The look of Billet & Black, the door looms are 1/2" O.D. by 3/8" I.D. by 7+" effective length. One fixed and one sliding aluminum boss. Plastic lined. Mount into 3/4" and 5/8" Diameter holes with set screw secured quick collars. TP-NYLON-1/2 (2 door pair as shown)...$28.00 Magnum Shooters Door jam wire contacts eliminate looms and wire flexing. With screws and connectors. Sold per door set. DK-MGS2 2 contact (shown at right)...$19.95 DK-MGS3 3 contact...$25.95 DK-MGS4 4 contact (shown at left)...$33.95 DK-MGS4P 4 contact + pin switch...$39.95 DK-MGS5 5 contact...$39.95 #MGS4 From Dakota Digital #MGS2 Medium Plastic Wire Looms These plastic wire looms for door jams are 5/8" O.D. by 3/8" I.D. by 7+" long. Fixed grommet at one end for the door jam. Sliding grommet for the other end goes into the door. More than twice the wire capacity as 1/4" I.D. tubing. Requires 3/4" and 7/8" Diameter holes. Hot rod black. P-MWL (2 door/pair)... Only...$12.50 Emergency Door Release Kit Even the very best electrical entry systems could go bad. This Emergency Door Release Kit gives you the mechanical backup way to trip the driver door latch and get into your car. Kit contains 8+ feet of encased cable, stainless steel braided door wire loom with billet ends to run the cable through and into the door, billet pull knob with set screw, cable clips and mounting hardware. Easily run into the engine compartment or under a fender well. Why leave yourself unprotected? TP-BKD-1...Only...$39.00

22 20 80 Amp Relay Be safe - Protect your switches from overload! For High Amp Circuits or Ignition Switch Relief Relay (Accessory Feed) Do you realize that the best ignition switches are rated for 30 amps and some for only 15??? How many amps of accessories are you using? This relay can give you a full 80 amps of accessory power and take all that load off the ignition switch. Simple hookup (with ring terminals for aftermarket type switches). 10 gauge wire feeds and connectors. Terrific instructions. Also great for any application that you need 80 amps of switching power. L Only...$ Amp Relay with Built-in Fuse 40 Amp Relays Use as a headlight relief relay! Relays give your circuit switching power and take the strain off of brake switches, fan switches, electronic switches or sensors. We also show you how to use this relay as an anti-theft device. L07-40 (40 amp SPST)... $ amp SPDT (double throw) relay that lets you switch between two outputs, ON/ON switching. Can be wired as an anti-theft device with a horn alarm feature so that the horn blows if someone tries to start the car without activating the secret circuit or switch. L07D-40 (40 amp SPDT)... $19.00 Small but Mighty! RELAYS New Super Small Size just 1/2" Square by 5/8" wide plus wire leads! Polarity Reversing Module Power window motors, power trunk lifts, door locks, etc. need to reverse the direction of rotation of the motor in order to work. This is done by reversing the voltage polarity to the motor wire leads. A Reversing Module is needed when you want to use a switch that doesn t automatically switch (reverse) both the positive and ground to the electric motor (such as a 3-wire switch or remote control). L07W-25 (25 amp rating, above)...$32.00 Latching Double Throw Relay This is just what you need to control your Hi/Lo headlight circuit. Once triggered by a momentary switch, it stays latched in that position. Trigger it again and it switches to the other position. The trigger circuit is ground on this relay. Kit includes lead wires and instructions $49.00 The easiest way to add a power circuit that we ve ever seen. Just wire the relay between power and the load, add a control switch to trigger the relay and one ground wire... you re done! No need to wire in an extra fuse holder. No problems because all of your fuses are already used. And it s really neat, compact and clean. Size the fuse to your load requirements and the circuit is protected. Use for any of the functions listed in our L07-40, below. L07-40F (40 amp SPST with built-in fuse, included)...$24.00 Choose the Reversing Module/Relays that are right for your application. OR when you want to use a remote control with a 5-wire, power window type switch, these relays will prevent the remote from shorting back through the 5-wire switch. Complete with 40 amp relays, wire leads. L-RLY2 (less prewiring but more versatile, like 2 SPDT relays)... $27.00 Ordering: We will be glad to take your order by phone during business hours. Our web site now has a shopping cart which is available anytime. Mail and fax are also options but please include a daytime phone number so we can get in touch if need be. Most orders ship within a day of our receiving them. We will contact you if we are out of stock on any items. Custom assemblies may take longer. Payment: We accept Visa, MasterCard, Discover & American Express cards. US Postal money orders are also accepted. On line orders can also use PayPal. We do not ship COD or accept personal checks. Shows and Events: Check our web site for the most up to date schedule of shows we will be exhibiting at. Our schedule for 2017 is: York, PA June 2-4, Back to the 50 s in Minneapolis, MN June 23-25, Syracuse, NY July 14-16, Louisville, KY Aug 3-6, Burlington, VT Sept Shipping: We ship most orders by UPS or USPS Priority Postal service. Shipping charges will be added to your order total. International and overnight shipping can be arranged if needed. Shipping Damage/Claims: Please check your order when you receive it. If the package is crushed or torn and parts are missing or damaged you should first notify the carrier. (USPS or UPS for example) If we sent the wrong items or something is missing, we want to make it right. Please let us know within 14 days of our shipping the order. Liability: Neither StreetWorks, its dealers or agents shall be held liable for damages, loss, injury, or other claims resulting from the use, misuse or inability to use any of these products. StreetWorks has no control over the usage of its merchandise and therefore has neither obligation nor liability for occurrences alleged to be resultant from the use of its products. The purchaser is solely responsible for determining the acceptability, legality, and safety of any products for use in your specific application. Our responsibility is limited to the original purchase price and to the original purchaser per our policy. Returns: Return material in saleable condition within 90 days to receive a full refund. Older returns or items that need to be repackaged will be charged a re-stocking fee. Custom panels or special orders are not returnable. HR StreetWorks, LLC (dba Watson s StreetWorks) Limited Warranty: Watson s StreetWorks products are warranted against defects in material and workmanship for a period of one year from purchase date. Proof of purchase is required. There may be specific exceptions to this warranty listed in the instructions for certain products. Products manufactured by other companies may be warranted by the manufacturer. Any consequential and/or incidental damages are not recoverable under this warranty. These exclusions may not apply in certain states. Products that fail due to: Wear and tear, water damage, misuse or use beyond intended purpose, alteration, neglect,improper installation, or damage by you or someone else are not covered by our warranty. Note: Any attempt to repair, modify or alter a product will void all warranties. Prices: It happens very rarely but yes, our prices are subject to change without notice. Hours: 8am to 5pm Eastern time, Monday through Friday. Watson s StreetWorks Orders Fax

23 Still the Best! Made in the USA! Headlight Reminder L75-TS Our compact weather tight turn signal module is 2 square by 1 ½ tall with mounting tabs. L10R-PBL L10-T L10S-PB Timed Self-Canceling Turn Signal Kits Beautiful switches with an adjustable (1-45 second) timed shut-off. Switch(s), timing module, relay pack, instructions. Metal Toggle (7/8" toggle, center off)... L10-TSC...$ L10 Series switches... L10R/S-PBSC/PBLSC... $ L75 series switches (on left in photo) with built-in ring LED s. Specify LED color: blue, green, red, or white and switch color: chrome or black... L75TSSC-XX...$ Self-canceling Timing Module Only, with wires... L10-SCTM...$ The Best Brake Switch Don t be confused by imitations, this switch is the best. Mechanical switch with self cleaning contacts to prevent the carbon buildup that destroys hydraulic switches. Adjustable design allows it to fit most pre-1960 vehicles, customs and many other later models with through-the-floor brake pedals. No additional brackets needed. Rated 8-10 amps, double any hydraulic switch. Waterproof. Stainless hardware. Connectors and instructions included. L08...$ R4 Brake Switch/Lockup L10S-TF Got a 700R4 transmission? Got a light car and lots of power? Want to have that 700R4 convertor locked up at all times except when the brake switch is on? Here you go. Our Best Brake Switch with a SPDT relay - when the brakes are off the convertor is locked up, and when they re on, it's not. Simple and easy to install. L08-700R4... $40.00 Manual-Canceling Turn Signal Kits With brake light override circuitry to let you use a single brake/turn bulb (such as 1157). Switches, relay pack, instructions. Metal Toggle Switch (7/8" toggle, center off) L10-T... $70.00 L10 Series switches L10R/S-PB/PBL...$ L75 series switches (on left in photo) with built-in ring LED s. Specify LED color: blue, green, red, or white and switch color: chrome or black. L75TS-XX... $ If you have switches but need brake light override circuitry, get our Turn Signal Module. Full instructions. NOTE: The Turn Signal Module with brake light override is included in all of our turn signal switch kits. L-TSMOD... $69.00 L75- TSSC New compact Turn Signal module! L10S-TFSC L10S-PBSC SWITCHES Classic Button Style Brake Switch We re famous for our simple adjustable lever brake switch but they won t work on every car so we now offer this simple button style switch. You set this up so that the pedal arm pushes on the button when the pedal is at rest. As the pedal moves the button releases completing your brake light circuit. This plastic switch has 1" of adjustment and is 3" inches long by ¾" in diam. Mounts in a ½" hole on your bracket $12.00 There is nothing as embarrassing to a car guy as a dead battery because you left your lights on. (Trust me I know). This kit sounds our new buzzer and the center lights red, reminding you your lights are on but the key is in the off position. The kit includes the buzzer, module and wiring instructions. 3/4" mounting hole, chrome bezel is 7/8". Matches our L75 switches $34.00 Great Looking Reminder Buzzer L10R-PBLSC L10-TSC A good reminder buzzer should do its job but not be too irritating. This new unit is just right and looks good enough to mount on your dash (matches our L75 series switches) or you can hide it underneath. The ring and the salt shaker center light with a red LED when the buzzer sounds. 3/4" mounting hole, chrome bezel is 7/8" $

24 22 SWITCHES Have all of your dash knobs match - see our Matching Dress-Up Knobs on page 12 Headlight Switch A high quality GM style switch, with shaft (3/16"), connector plug and terminals. Includes dome or interior light circuit (grounding switch), headlights, running lights and dash light dimmer. Our B14TN-3/16 Billet Knob included. Rated 25 amps. AA-HLS2... $29.00 On - Off Pull Switch & Trim Nut #L17 Wiper Switch A quality aftermarket windshield wiper switch. Two speed, three position - Off, Low and High. Universal symbol plastic knob. Park terminal. 3/16" shaft. Use any of our 3/16" Dress-Up Knobs with this switch. L-WS...$20.00 This old school switch is rated at 20 amps to handle just about anything. Pull for on & push in to turn off. Comes with the black plastic knob shown and a chrome trim ring (not shown). We now have a billet trim ring which we sell separately. Upgrade the knob with any of our threaded knobs on pages 7. L-PS Pull Switch Only... $ Billet Trim Ring... $12.00 Glove Box Switch Miniature Toggle Switches Billet Headlight Switch Nut with O-Ring Billet Headlight Switch Nut with O-Ring. Matches our ignition switch nut. Perfect for part AA-HLS2. 3/4" diameter by 1/4" thick with 7/16-28 thread and Dia. center hole. B-HLSN... $12.00 Attention! Does Your Headlight Switch Get Hot? Don t overload your headlight switch with high wattage headlights. Get our 40 amp relay and take the load off of your switch! (Also see page 42.) 40 Amp Relay With instructions for use as a Headlight Switch Relief Relay. L amp SPST...$17.00 Billet Wiper Switch Nut with O-Ring Billet Wiper Switch Nut with O-Ring. Matches our ignition switch and headlight switch nuts. Fits our part L-WS. 3/4" diameter by 1/4" thick with 7/16-28 internal thread. B-WSN... $12.00 Really Low $$$ Momentary Starter Switch with Boot Metal, push button momentary starter switch with 5/8" dia. by 5/8" long stem. Terminal screws and waterproof boot/nut included. Rated 60 amps at 12 vdc. L67...Only $4.50 or 3/$10.00 Simple, clean, small toggle switches in round or flat paddle. 6 amp max load. Easy mounting in a 1/4" hole. With wire leads. ON-OFF L17 or L17F (each)... $10.00 Mom.(ON)-OFF L17M or L17FM (each)... $10.00 ON-OFF-ON L17OFO or L17FOFO (each)... $10.00 Mom.(ON)-OFF-(ON) L17MFM or L17FMFM (each)... $10.00 A simple normally ON switch. Turns off when pressed. Perfect to go with our Illuminator LED s or as a replacement for your old switch. Mounts in a 1/4" dia. hole. Rated 1.5 amps. L48... $8.00 Wiper-Washer Switch This same great wiper switch is now available with built in washer circuit. Turn the nob for off/ low/ high speeds and push in for your washer fluid pump $39.00 #L17F Watson s StreetWorks Orders Fax

25 BATTERY DISCONNECTS 23 As Seen On Gearz TV! Toggle Battery Disconnect A mini-momentary toggle switch controls this battery disconnect. Easy to install and easy to hide so it s a perfect theft deterrent. Intended for dry use only, install the toggle inside your ride. Push it once and the battery is connected, ready for use. Push it again and the battery feed is disconnected. L27TM Toggle Battery Disconnect... $ Disconnects can save your battery... and maybe even your car - they re a great theft deterrent too! A StreetWorks Exclusive! MagTech Battery Disconnect Instant ON, Instant OFF A simple wand-like swipe with the magnet key makes it that easy to disconnect your battery with our MagTech Battery Disconnect kit. A hidden switch is activated by the magnet key carried on your key ring. MagTech does not work through steel but works through glass, fiberglass, plastic, aluminum, stainless, etc. and next to steel. L27M MagTech Battery Disconnect... $ PressTech Touch Pad Battery Disconnect Touch ON, Touch OFF to disconnect your battery with our PressTech Touch Pad Battery Disconnect kit. Hide the waterproof touch pad for maximum security - put it under the lip of your dash, behind upholstery, inside a fender well, etc. Great as an antitheft deterrent or to prevent battery drain. Includes our auxiliary hot feed to the clock or computer or other items requiring power for memory. L27P PressTech Battery Disconnect...$ Very easy to hide either inside or outside your ride. Make it safer with a disconnect. Battery Disconnect for use with Remote Controls Use that extra momentary remote control channel (just one) to shut off the battery from outside the car. Push it once and the battery is connected. Push it again and the battery feed is disconnected. NOTE: Remote must be fed by the auxiliary hot feed to work. If your door releases are controlled by your remote and do not have a separate hot feed, they will not be shut off by the disconnect. L27R Battery Disc. for Remote Controls...$ No one has more types of battery disconnects than StreetWorks Our battery disconnect solenoid is a time tested and reliable way to deter theft and prevent battery drain. Choose from 4 different ways to trigger this rugged unit. All units include our 10 amp auxiliary hot feed to the clock, computer or other items requiring power for their memory. The solenoid is rated at 110 amps continuous and 750 amps surge. No electricity is used when the unit is On or OFF, only when switching. Hardware, wire, connectors and detailed instructions are included with each kit. Note: Modification or replacement of your battery cable will be required to install these disconnects

26 24 FUSE PANELS & HOLDERS 6-Fuse Raised Power Tap Fuse Block Hey, Guys - if you need to add a few circuits for all of the extras that you ve installed, this Power Tap Fuse Block is the hot ticket. It has an 8 gauge by 22" long power input lead with ring terminal that feeds all 6 circuits. Rated 30 amps max per fuse and 80 amps total load. Each circuit has a spade screw output and the terminals are provided. Mounting screws provided. Overall dimensions are 4-7/8" long by 1-3/8" wide and 2-1/4" high including the protective dust cap. For ATO/ATC type fuses. L60-PT6... Only...$ Amp Circuit Breaker A great way to protect main power feeds. Easily re-settable. Test button feature. Positive visual status (shown tripped in photo). Stud connections with water resistant caps, ring terminals and mounting screws included. L76 (at left)...$45.00 Maxi Fuse-Link Kit Replace the fusible links that normally protect the main power feeds from the battery and alternator with Maxi-Fuses. Perfect for rewiring jobs. Easy to detect, easy to replace fuses. 2 maxi-fuse holders with 8 ga. wire leads and waterproof covers. (3) - 50 amp maxi fuses. Connectors and tie wraps. Also for high amperage add-on circuits. (Maxi fuses are not slow burn like fusible links.) L46 Maxi Fuse-Link Kit... $25.00 Maxi Fuse Holder Only L46H (each)... $8.50 Maxi Fuses L46F50 (50 amp., ea.) or #L46F70 (70 amp., each)... $2.50 LED Dummy Loads This dummy load wires in parallel with the LED to add the necessary amperage draw. One dummy load per side is required. L52DL2 (pair)...$ Way Hazard Diode Kit This simple little kit lets you add 4 way flasher capabilities to your ride. Prevents back feeding from side to side. Use your own on-off switch. Instructions included. WI-4WX...$ Fuse Block Each fuse circuit is fed separately. 30 amps max per fuse. Side blade input and output on opposing sides and the terminals are provided, as well as the mounting screws. Overall dimensions are: 7 1/4" long x 2-1/16" wide x 2-1/16" high, including the protective dust cap screw. For ATO/ATC type fuses rated for a max of 150 amps. WI $29.00 Diodes Prevent circuit back-feeding Limits current flow to one direction 6 Amp Diode Protect accessories, & fuse panel to alternator issues L-6A-Diode.$3.00 Mechanical LED Flasher This flasher works with any combination of LED and conventional bulbs. An added benefit is that it makes the clicking sound we are all accustomed to. This flasher works from as little as 20ma up to 25 amps max. load. This is a round 2 prong flasher that is a direct fit to your current panel. The pigtail coming out of the top must be grounded. WI-02 Mechanical LED flasher... $ Amp Diode Isolates radiator fans, tuner amps & other high load circuits. Includes 10 gauge wire & connectors. L-85A-Diode.$22.00 Electronic Flasher for LED s New round design! A direct plug-in to your 2-prong flasher panel socket. This solid-state (electronic) flasher works for loads from as little as 20ma up to a heavy duty 25 amps maximum load. 1-3/8" diameter by 1-7/16" tall. AM-02R (each)...$25.00 LED s used for turn signals do not pull enough amperage to work a standard metallic can flasher. You will need to use either a low amperage electronic flasher as a replacement for the standard flasher or dummy loads which increase the amperage draw through the flasher so the standard unit will still work. Power Post with Red or Black Base This compact solution to distributing power has a 3/8" center lug and 8 connections that can handle 20 amp each. Base is 1-¾" wide by 3-½" We include 8 ring terminals and mounting screws. Insulated base is available in Black or Red. WI-38B Black Power Post. $29.00 WI-38R Red Power Post $29.00 Grounding Strip 1-1/4" by 5-3/4" Grounding Strip has a solid brass bus bar, (2) 1/4" studs with nuts and (10) #8-32 Screws for ground contacts. Insulator base has two countersunk holes for mounting. L38 each...$21.00 Watson s StreetWorks Orders Fax

27 REBEL WIRING KITS 25 Rebel 9+3 shown All Rebel wiring kits are assembled in the USA from American made components, using heavy duty SXL wire labeled every 6" and bundled for easy Installation. Kits come with horn & flasher relays, fuse block terminals, instructions and labels. Rebel This basic hot rod kit has 9 prewired circuits plus 3 spares. This harness has 12 Fuses and 14 Circuits. Its perfect for your Hot Rod, Street Rod, Custom or Muscle Cars and Trucks that require fewer circuits. This kit has 11 circuits for lights, gauges, radio, radio constant-cell phone charger, wiper, ac-heat, motor, and third brake light, plus 3 open circuits for whatever you might want to add such as power windows and doors, etc. Kit comes with easy to use instructions for Chevy, Ford or Mopar installations, dash light wire, neutral safety switch wire, fusible link, 1-1/4" rubber grommet for the firewall, 3 fuse block terminals and fuse block label. This kit does not include wiring for electric radiator fan or fuel pump. RW $ Circuit Wiring Harness This kit takes the Basic Muscle Car Harness then adds Power Doors, Power Windows, Power Seats, Cruise &Electric Fan Relay Control wire. Comes with Fusible link, 1-1/4" Rubber grommet for firewall. RW $ Circuit Wiring Harness designed for Chevy, Ford, Mopar and other 60 s and 70 s cars and trucks. Kit has the following circuits: Horn relay, Headlights 2 or 4, Hazard, Cell phone charger, Dome and Trunk Lights, Radio and Radio Constant, Gauge Power, Wiper, Brake Light,3rd Brake Light, AC-Heat. Turn Signal, Elec. Choke and 1 Accessory wire, Fusible Link and Rubber Grommett. This kit does not include wiring for electric radiator fan or fuel pump. RW-16...$ VW Bug Deluxe Wiring Harness 16 Circuit universal harness, Horn Relay, Lights, cell phone charger, Hazard, Gauge Power, Wiper, Brake Lights, AC-Heat, Back-up, Radio Constant, Turn signal, Dome light, Trunk Light and 2 Accessory Circuits both Keyed. 12 Fuse panel with 3 prong flasher and Horn Relay. Assembled with heavy duty SXL wire, labeled every 6" and bundled for easy installation. Glass body buggys should use this BUG HARNESS. RW-bug...$ VW.Bus Deluxe Harness This bus harness includes longer wires, (2) interior lights and (2) accessory circuits. RW-BUS...$ Check our web site for 6 volt, diesel and all the Rebel wiring harnesses we offer. Electronic Fan Controller From Dakota Digital The PAC-2750 gives you ultimate flexibility with your electric fan installation. It works with your existing water temp gauge, a dedicated sending unit or your OBDII. (OBDII needs a separate BIM-01-1 sold separately) Fully programmable on and off temps from 150 to 250 and can be programed to stay on after shut down. LED display shows temp readings and helps with installation. Box measures 4" x 2.5" x 1" and mounts inside the cab or an alternate dry environment. DK-PAC $ Mag Daddy Cable Mounting Clips Radiator Fan Harness This Quality radiator fan harness comes with 195 sending unit. The sender has 3/8NPT threads and we include a 3/8 to 1/2NPT adaptor. Kit includes the sending unit, adaptor, fuses, relay connector and instructions. SP-195FH...$ Thermostat only (195 on, 185 off) SP-195TS...$ $ Small 1/2" Cable Daddys $ Medium 3/4" Cable Daddys $ Large 1" Cable Daddys $ Pipe Zip Daddys What a great idea! Wire management without having to drill into your frame. These clips have rare earth magnets at their base giving them almost unbelievable holding force. Each of the smallest will hold up to 10 pounds of cables and stay in place. The larger ones will hold 16 pounds. We carry them in several styles. The Zip Daddy s have a raised flat hole for you to slide your zip tie through. The cable Daddy s have a one way opening that keeps your wires or hoses inplace until you take them out. Use the round base on flat surfaces and the rectangular bases on curved surfaces $ Flat Surface Zip Daddys $ Pipe Cable Daddys

28 26 REMOTE CONTROLS As Seen On Trucks TV! The Gemini Exclusively from Watson s StreetWorks 2-Function Remote Control With 2 built-in relays A remote control that gives you two functions in open either 2 doors, control power door locks, operate 1 power window up & down or 2 windows down only. User programmable. Two 30 amp relays are built into the receiver so you can power actuators or solenoids directly. 12 gauge power wire leads. Built in fuse holder with fuses. Pre-wired for backup switches (switches not included) Optional ignition disable so the doors can t be accidently be triggered while the car is running. Includes butt connectors and instructions. L-GM2Z 2 Channel Remote Control... $ The Quadra 4-Function Remote Control With Three (3) Transmitters! Buy the remote control that you want and need - no more and no less. With StreetWorks, we work to give you exactly that. Our Quadra remote control has four functions letting you control 2 power windows up & down. Or use it to control two door poppers, a trunk release and a battery disconnect for example.. User programmable. Two 30 amp relays are built into the receiver for channels 1 & 2 so you can power actuators or solenoids directly. Also includes 2 external 40 amp relays, 12 gauge power wire leads, built in fuse holder with fuses, butt connectors and instructions. Channels 1 & 2 are pre-wired for backup switches (switches not included) Optional ignition disable so the doors can t be accidently be triggered while the car is running. L-QD4 4 Channel Remote Control...$ Lucky Function Remote With Three (3) Transmitters This 7 function remote control lets you do nearly everything you want. Two 30 amp relays are built into the receiver for channels 1 & 2 so you can power actuators or solenoids directly. Also includes 5 external 40 amp relays for the other channels, 12 gauge power wire leads, built in fuse holder with fuses, butt connectors and instructions. Channels 1 & 2 are pre-wired for backup switches (switches not included) Optional ignition disable so the doors can t be accidently be triggered while the car is running. L-LK7Z 7 Channel Remote Control... $ NEW! Add our exclusive new dual window controller to any of our remotes and you can control two power windows up and down with just 2 remote buttons. Turn your 7 function remote into 9 functions. See page 6 for details on the dual controller. MagTech Magnet Entry System The magnet is the key. Place the magnet close to the hidden switch and it opens the door or trunk. Includes: keys, switches,clips, 40 amp relays, a backup button and instructions. Note that magnets will not work through steel. The reed switch can be put behind glass, fiberglass, aluminum, filler or any nonmagnetic material. Key must be able to get within 5/8" of the reed switch to activate. L20 2-Door Set Up (Shown)... $99.00 L20S 1-Door Set Up)... $54.00 Extra magnet keys L20K (2)... $15.00 L20KS (1)... $7.95 Watson s StreetWorks Orders Fax

29 PressTech Touch Pad Switch Activate door solenoids (relay needed) or actuators with a press. Small, 1" by 1" by 1/8" thick pad switch can be hidden in the neatest places. Put it under upholstery, inside a fender lip or mirror housing, almost anywhere. Fully waterproof. With quality 3M tape for mounting. L32PS (each, 2 amp max.)...$32.00 If using with solenoids or loads over 2 amps, please see page 20 for the relay section.. Waterproof Backup Button SWITCHES The NEW Trilogy package does it all! RFID Security Push Button Start AND Remote Start 2 extra Remote Channels Everything you want together in one package. We ve combined our Hot Dot push button start, our RFID security, and a remote start feature. The 3 function remote does everything our Gemini system does PLUS we ve added the ability to remote start your engine. Just press both buttons for 2 seconds and listen for the roar of your engine. The push button start module replaces your key on the dash. (Be sure to let us know what color you want the indicator light to be). We complete this trifecta with our RFID security unit. So even if those evil doers manage to get your car started, they re not going far. For more details on the remote see the top of page 32. Details on the Hot Dot push button start and RFID are on page 28. WI-TRI... Trilogy remote package...$ Need more than 2 extra channels? Our Super 7 package includes the push button start and RFID with our Luck 7 remote giving you 6 remote channels for all the functions you want. WI-S7 Super 7 remote package $ Individual Chrome or Black L75 Series Switches For momentary or On/Off functions, positive (+) or ground (-) switching, rated 1 amp max. load. Specify Blue, Green, Red or White LED Ignition indicator. Switches mount in a 5/8" dia. hole. L75SMB/G/R/W (Mom. Chrome) L75SMBB/GB/RB/WB (Mom. Black)... $23.00 L75SOB/G/R/W (On/Off Chrome) L75SOBB/GB/RB/WB (On/Off. Black)... $23.00 Billet Face Plates for L75 Series Switches Tightening the switch nuts secures the face plate in position. L75FP-2 2-switch face plate, 1" by 2"... $15.00 L75FP-3 3-switch face plate, 1" by 3"... $17.00 L75FP-4 4-switch face plate, 1" by 4"... $19.00 Actual Size! Actual Size! Waterproof backup button for remote controls. Just 5/8" dia. by 1/4" tall (installed height) - smaller than a penny! Mount in a 1/2" hole. Momentary action. 24" wire leads. Hot Rod black. L65BS... $ Larger Matching L75-22 Series Momentary and On/Off Switches Do all of your controls with matching 22mm switches. Available with blue, red, green or white LED illumination ring. Fits into a 7/8" diameter hole. Overall diameter is just under 1". Switch is rated at 5 amp maximum load..l75-22smb/r/w Momentary, blue, red or white LED ring...$24.00.l75-22sob/r/w/g On/off, blue, red, green or white LED ring...$24.00 Billet Face Plates for L75-22 Series Switches Tightening the switch nuts secures the face plate in position. L75-22FP2 2-switch face plate, 1-1/4" by 2-1/2"...$15.00 L75-22FP3 3-switch face plate, 1-1/4" by 3-3/4"...$17.00 L75-22FP4 4-switch face plate, 1-1/4" by 5"...$19.00

30 28 PUSH BUTTON START & IGNITION SWITCHES New & Improved One switch does it all! Blue, Green, Red or White LED! RFID Security Key Fob Hot Dot All-in-one Ignition/Start/Stop Switch Replace your old keyed ignition switch with New and Improved Hot Dot Ignition system. The modern 22 mm switch mounts in a 7/8" diameter hole. When running the ring glows in your choice of colors (white, blue, green or red) This new module has the start circuit built in and a 30 amp accessory feature. A momentary push of the button activates the accessory circuit. Press and hold the button and the starter engages. When you release it you re in run mode. Press it again when you re in Accessory or Run mode and it turns things off. This kit will work with our smaller momentary push button but be warned guys, you ll be using your pinky Blue LED... $ Green LED... $ White LED... $ Red LED... $ L75X Module only, no switch... $ This new StreetWorks RFID is designed to work with our Hot Dot Ignition System or your existing key. This is the security system your hot rod has been missing. Just keep the transmitter fob on your key chain and your car won t start unless you re in range. The range is adjustable and you can choose from 3 levels of security. High security: The car only starts with the RFID fob in range. If the running car goes out of range it shuts down within 1 minute. Medium security: The car only starts with the RFID fob in range. It will stay running until the operator turns it off, then it won t restart. No Security: Should your fob become lost or damaged you can override the system by entering a code with the hidden button switch. Range can be set from 5 to over 150 feet. Kit includes the receiver, 2 key fobs with batteries, button switch and instructions. WI-RFID... $99.00 Ignition Switch with Billet O-Ring Nut Don t mess up a beautiful car using an ignition switch with that cast, ribbed nut. Here is a quality ignition switch with 30 amp rating. Four positions - Accessory, Off, On and Start. 2 keys. Die-cast housing and mounting stem that s 3/4" diameter by 3/4" long. AND it has an attractive machined billet nut with decorative black O-ring. The perfect complement to our Contemporary Column Nobs. L47 Ignition Switch with O-ring Nut... $29.00 Nut w/ O-ring only. (Double check your thread size.) L47N Nut & O-ring (3/4-20 Thread)...$12.00 What s that? You like the way that cast, ribbed nut looks? O.K. - then just get that quality switch with the regular nut. L47S Ign. Switch with Standard Nut...$19.00 Ign/ Start Ign/ Acc Off Ignition/Start Pull Switch The first pull position is Ignition/Accessory, the second is a spring loaded Starter. The body of this switch measures 1-7/8" long by 1-1/8" wide by 3/4" high, not including terminals. The mounting stem is 3/8-24 thread and will accommodate panel thicknesses up to 3/16". The black plastic nob has a thread so you can add one of our billet dress-up nobs. The electrical ratings are: Acc. = 10 amps, Ign. = 5 amps, Start = 5 amps, so check out our 80 amp relay for your extra accessories. With installation hardware and instructions. Trim nut sold separately L71...$ Trim Nut...$12.00 Replacement VW In-Dash Ignition Switch If you re rewiring your early VW that has an in-dash ignition switch and you re adding accessory circuits you need an ignition switch that has that feature. 3/4" shank fits into the original dash hole... AND it clears the ash tray brackets. 30 amp rating. Four position switch (Accessory, Off, On, Start). Two keys. Includes ring terminals for the outputs. V-IS...$32.00 Watson s StreetWorks Orders Fax

31 6 VOLT LIGHT & E-BRAKES 29 Amber or Red LED s and 1/2" thick lens! Mini - Hot Slot Park/Turn Signals and Auxiliary Taillights In your choice of Amber or Red LED s! Our kit features (2) - Super Bright LED units that mount inside aluminum housings. 1/2" thick build-in, flush mounted clear acrylic lenses to fit into slightly curved fenders for a seamless look. The lenses are only 1/2" wide by 1-3/4" long! Kit includes dual intensity convertors to give running lights and turn signals. Need only 1" of back space. Weld-in or glass-in mounting studs included. L63AN Amber (pair) or L63RN Red (pair)...$ L63-LENS Clear Lens (each)... $18.00 Lokar Floor Mount Emergency Hand Brake with chrome plated handle is designed after the automotive industry standard. Ratchet cut gear plate and lock are heat treated for strength and safety. Feature includes 4-point mounting capabilities for floor mount or side mounting for personal applications. Cables are sold separately. Hand Brake measures 10" from end to end. EHB-7000F... $ Lokar Floor Mount E-Brake Boot Kit includes a black naugahyde boot, polished stainless base ring and screws. Trim ring measures 2-1/2" x 6-1/4" 70-BHBF...$ Volt 3rd Brake Light! Is your old school ride still running on 6 volts? Now you can feel safe knowing the cars behind you will see your brake lights. This slick little unit attaches to the inside of your rear window. For easy removal when you re at a judged show attach the light with the included suction cups. For a more permanent installation double sided tape is also included. The light is divided into 3 sections, letting you use it for turn signals as well as brake lights. Works with either positive or negative ground vehicles. Instructions included. This light is 12" long, 5/8" tall & 7/8" deep. 6 volt Brakelighter $60.00 Also available in 12 volts $60.00 Optional mounting clip package. If your rear window is slanted, curved or split glass you may want to order the optional mounting clip pack. It includes brackets and the necessary hardware to adjust the light to the perfect viewing angle. Brakelighter clip package $12.00 Lokar Cables designed for Floor Mount & Under Dash Mount Hand Brakes. Kit comes with quality one-piece aluminum adjusters and aluminum ferrule to eliminate fraying of stainless housing. Design allows rear end backing plate fittings to be removed without removing brake cables. Lokar cables also feature adjustable cable lock and clevis. Includes cable bracket, spacers, stainless inner cable, two 8 foot black outer housings that U-Cutto-Fit. EC-80FU... $ Lokar Under-the-Dash Foot Operated E-Brake This foot brake gives you ease of operation along with a clean, out of the way e-brake. The arm measures 10" from the pivot point to the bottom. Mounts to dash or firewall. Rubber stop for quiet pedal return. Instructions & hardware included. Cables sold separately. EFB $ E-Brake Warning Switch Kit Triggers your dash light or buzzer to alert you when your emergency brake is engaged. Includes switch, stainless trigger and hardware. EHB-7001 (not shown)... $35.50 The E-Stopp is the perfect e-brake for custom vehicles and winner of the 2012 NSRA safety product of the year. It is a one button controller with one push to set and a second push to release. If wired direct to a battery source it can be activated with the key in the off position. It not only frees up room on the chassis and in the cab but doubles as an anti-theft device when the button is hidden. It works with any kind of brake system that can accept an e-brake cable. Mount anywhere on your chassis that you have room. The electric parking brake kit comes with the actuator, the control box w/ switch, wire connectors & instructions. Dimensions: The Actuator is 15" x 2" x 1.8" Not including mounting taps & cable. Cable Thread: M6 by 1mm - M10 by 1.5mm - The Control Box is 4.2" x 2.7" x 1.6" -The Button is 1.1" diameter. Cable Length: Black cable housing 10.75" and the Inner Cable is 11". E-Stopp Electric parking brake # $480.00

32 30 LED HEADLIGHTS & REPLACEMENT BULBS LED Headlights at Last! These light packages are a direct replacement for your old sealed beams. The Hella Vision Plus glass bulbs are Winner! NSRA Best New Safety Product DOT approved, fit your existing mounting ring and have an H4 base. The LED bulbs produce the maximum allowable light on both hi and low beams with a light pattern that doesn t blind on coming drivers. Using less than half the amps of a sealed beam no wiring upgrade is needed. Each bulb has a power controller that you mount separately. May require modifications to your inner bucket. 2,400 lumens at less than 4.5 amps. 7" round headlights with H4 style LED bulbs. The lenses have the 3 positioning tabs to make aligning them a snap. From the retaining ring they are 4-¼" deep so be sure your buckets will accept the bulb-fan assembly Sold in pairs...$ " x 6" rectangle headlights with H4 style LED bulbs. The lenses should fit right into your existing frames. They are 5" deep with the LED bulbs in place Sold in pairs...$ H4 LED bulbs only. Put them into your existing lenses Sold in pairs...$ /4" Round lens. Most people will run 1 set of these LED bulbs and leave the other pair of sealed beams in place. EL-HL5 Pair of 5-¾" lenses with LED bulbs...$ The Best 1157 Bulb For years we ve all been disappointed by the LED replacement bulbs on the market. The offerings were so poor we wouldn t sell them. That s all changed with this new product that has super bright LEDs on 4 sides and a 5th shining directly from the tip to produce an incredible amount of light. We only offer them in red or amber light so you won t overwhelm the pigment in your older lenses. They are ¾"dia. & 2-1/4" tall. These dual filament bulbs are a direct replacement for your old ones. Sold in pairs Pair of Red LED 1157 Bulbs...$ Pair of Amber LED 1157 Bulb...$ LED replacement bulbs with WHITE light. These single element bulbs work in your existing sockets. These LEDs shine much brighter originals EL-56W..Pair single filament $ " Universal Bucket Replacement headlight buckets for your 7" round headlights. These plastic buckets are intended to be used for either a new installation or to replace older rusted out headlight buckets. The chrome retaining ring, new 3 prong sockets and gaskets are included. They mount onto a flat vertical surface. Sold in pairs. A 6.5" dia. hole will be needed to accept the new bucket. EL-HLB..Pair of universal buckets...$70.00 EL-HLP..Pair of 3 prong plugs only..$15.00 Now with optional chrome bezel The Switch is Here! Switched Dome Light A modern car feature for your favorite ride. This attractive dome light has a switch built right into the lens. Convenient size is just 4-1/2" by 2-1/2", snaps into place - a hole template is provided. Bulb and 24" pre-wired leads included. Charcoal colored plastic housing fits into most interior motifs. Now with LED bulb. L82 Switched Dome Light (each)...$51.00 LED Interior Light with Switch This sweet little LED interior light will look great in your ride. The lens is just 7/8" by 3". Rock the lens either way and the light turns on. Externally switched as well. The black plastic oval mounting plate is hiding behind the chrome bezel and measures 2-1/16" by 5". Mount behind your headliner with just the lens showing or on top and cover the black plastic with the snap on chrome bezel. Screws included. Needs 1-1/4" of clearance. L85...$31.00 Oval Dome Light by Trique Mfg This beautiful oval Interior light by Trique Mfg. is machined from billet aluminum and houses (6) 5mm cool white LED s behind a dome shaped lens. Each light is fully polished with a radius bezel matching our other interior components. Requires an external switch. Dimensions: 5-¼" x 2-1/8". Needs 5/8" back space. Mounting bracket is included. TQ-OIL... $71.00 Watson s StreetWorks Orders Fax

33 Recessed Beehive Lights NEW! We mounted our large Beehive lights in a recessed stainless steel bezel. The result is a very cool light that s an easy upgrade for your ride. They come in either Amber or Red and include our LED conversion modules for dual intensity use. These lights work as park lights and turn signals or brake as well with the reds. Designed to be the simplest mounting lights on the market. Just drill a 2-¾" hole in any flat surface, slide the bezel through and attach with the included hardware. Sold in pairs. SAE/DOT approved. EL-10A. Amber recessed beehive lights, pair...$95.00 EL-10R. Red recessed beehive lights, pair...$95.00 LED TAILIGHTS 31 Bullet Beehive Taillights, now in 2 sizes For years we ve been selling our popular beehive taillights. Now they come in two sizes. The machined billet base has threaded holes for easy mounting. The aluminum bases have a bright machined finish that looks great or can be polished if that s the look you want. These sealed units have an array of LED lights for a lifetime of trouble free use. Each set comes with mounting hardware and dual intensity converters, letting you use them in any combination. Use the ambers on any corner for park & turn. Reds can be just brake lights or brake & turn, even park, brake & turn. Group more than one pair for that classic look. SAE/ DOT approved. The larger beehives are 2-¾" dia. at the base and 2-7/8" tall. L84R Large red Beehive lights, (pair)... $92.00 L84A Large amber Beehive lights, (pair)... $92.00 The small beehives are 2-¼" dia. at the base and 2-1/8" tall. L84BR Small red Beehive lights, (pair)... $84.00 L84BA Small amber Beehive lights, (pair)... $84.00 L84BW Small white Beehive lights, (pair)... $84.00 Small white Beehives do not include dual intensity converters. Lite N Boltz License Plate Lighting Kit Polished Stainless Steel Bolts have right angle LED to illuminate the plate (2 of the 4) plus 2 more matching bolts for plate bottom. 2 Dome head bolts are 1/2" Diameter by 9/16" tall. All with 5/16-18 by 3/4" threads. 12 vdc. Set of four as shown. From DEI. DE-LNB4... $35.00 Side Marker Light Kit Let your rod be seen from the side with this new side marker light kit. You get 2 amber and 2 red mini light buckets and 4 lenses for flush mounting. The lights are sealed and weather proof to hold up even in your fender well. Add our dual intensity converters (page 20) if you want turn signal indicators too. Mini 1/4" or 1/2" wide lenses. EL-SMK ( ¼" x 1 ¾" lens...$ EL-SMK5 ( ½" x 1 ¾" lens...$ Hot Slot Flush Mount Bright White LED Backup Lights Super bright LED strip gives you all the backup light you ll need. The lights are mounted in a metal buckets. The flush mounting clear acrylic lens are ½" wide by 1-¾" long. Mounting hardware is included. Note: these lights are not intended as daytime running lights. L63BW-5 (pair, shown at left)... $ EL-63M Pair of backup lights with 1/4" x 1-3/4" micro lens (not shown)... $ Give your car the 21st Century look with Bright White LED Running Lights and Backup Lights!

34 32 LED 3RD BRAKE LIGHTS & TAIL LIGHTS Micro 3rd Brake Lights Winner 2015 NSRA Best New Safety Product Virtually every driver on the road today is conditioned to see a 3rd brake light. The last thing you want is a rear end collision. You also don t want the beautiful lines of your ride disturbed by a big ugly light sitting on your trunk. At only ½" tall these little guys are just the answer. Tiny yes, but we re using powerful CREE style LEDs to put out tons of bright red light. Made from billet aluminum you can leave them natural, paint or polish them. We designed them with muscle cars in mind but they ll work on any car with a flat spot on the rear deck. They are held in place with 3M tape so no drilling is required when mounted at the trunk seam. Available in 2 styles to let you pick the one that fits your taste. Both come with lead wires and instructions. Now available polished from StreetWorks. Sleek & Slim Micro 3rd brake light. 1/2" x 2-1/2" x 1-3/4" EL-MB...$79.00 EL-MBP (Polished)...$89.00 Double-D LED Taillights Double-D taillights with twice the diodes. Two strips of 60 Super Bright Red LED s per light, inside an aluminum housing. 1/4" thick build-in, flush mounted red acrylic lenses with prismatic diffusers. The lenses are 1/2" wide by 15-1/4" long. Lights are split for separate brake and turn signals. Hardware and dual intensity converters included. L58-DDR Taillight (pair)... $ Also available with clear lenses with diffusers. L58-DDCL Taillight (pair)...$ Large Double-D 3rd Brake Light split (15/15)-(30/30)-(15/15). L58BT-DDR Red Lens or -DDCL Clear Lens... $ Retro Round Micro 3rd brake light. 1/2" x 2-1/2" x 1-3/8" EL-MBR... $79.00 EL-MBRP (Polished)...$89.00 Double-D LED Taillights with Bright White LED Backup Lights Double-D taillights - twice the diodes - two strips of 50 super bright LED s per light plus a bright white LED strip for backup lights all inside an aluminum housing. Build-in, flush mount clear acrylic lenses are 1/4" thick, 1/2" wide and 15-1/4" long plus diffuser. Red lights are split for separate brake and turn signals. Hardware and dual intensity converters included. L58-DD-BU Taillight (pair)...$ Sequential LED Taillights! A real attention getter! 60 Super Bright Red LED s in each light. 1/4" thick build-in, flush mounted red acrylic lenses with prismatic diffusers are 15-1/4" long by 1/2" wide. Each light is split into three groups of 20 LED s that sequence inside-out with the turn signals. Brake lights quickly sequences once then all stay on while the brake is held. Includes converters, sequencing modules, LED flasher and great instructions. L58-SEQ..Flush mount tail lights with sequencing ( pair)... $ L58SM-SEQ Our small (7 ½") flush mounts with sequencing ( pair)... $ Sequencing 60 LED 3rd Brake Light Get their attention with our Sequencing 60 LED 3rd Brake Light. It's split and sequences inside-out once when the brakes are first applied then stays on solid. Flush mounting, build-in lens is 1/2" wide by 15-1/4" long. L58B-SEQ... $ Make this light into an extra taillight, too. Just add this convertor. L58B-SEQ-CON... $25.00 Sequencing Taillight Kit Make your own Sequencing Taillights with this kit. Provides modules, connectors and instructions to turn your three-lights-per-side taillights (bulb or LED) into sequencing taillights. L58-TSK (For both sides)... $ Watson s StreetWorks Orders Fax

35 StreetWorks LED Taillight Kits Include... the LED housing with LED s installed... pre-shaped lenses... the mounting hardware... instructions... the diffuser pre-bonded to the lens... Just plain better than theirs - Buy StreetWorks. HOT SLOT LED TAIL & 3RD BRAKE LIGHTS 33 Hot Slots! Flush Mount LED Taillights For integral or separate Turn Signals! Each light is split so that the LED s can be wired for either type of turn signal. 60 Super Bright Red LED strips inside aluminum housings. 1/4" thick build-in, flush mounted red acrylic lenses with prismatic diffusers - can be fit into slightly curved fenders, roll pans and pickup bed corners up to 1/4" for a seamless look (the acrylic lenses cannot be bent). Taillights have dual intensity for taillights and turn-brake lights. Need only 1" of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Lenses are only 1/2" wide by 15-1/4" long! Note that these are build-in kits requiring paint and body skills. L58 Red Lenses (pair) or L58CL Clear Lenses (pair)... $ Need the lenses for your own project? They include the shaped red lens and bonded clear diffuser. L58-LENS (each)... $30.00 Each light contains 40 Super Bright Red LED s for Brakes and Taillight plus Bright Amber LED s for the Turn Signals, with clear lenses and prismatic diffusers. Left Light Amber Turns Red Brake/Taillight 3rd Brake Light with Turn Signals 3 groups of provide a 30 LED center 3rd brake light and (2)-15 LED turn signal/brake lights. Or add our LED Conversion Kits to get taillight and turn/brake or wire them all as one big and bright 3rd brake light. How c-o-o-l! Red LED s and Red Lens with diffuser. L58BT...$ Hot Slot Flush Mount LED Taillights with Separate Amber Turn Signals NSRA s Best New Safety Related Product of the Year 2009! If you have turn signals that are separate from the brake lights, this kit is exactly what the doctor ordered. Each light has 40 super bright red LED s that handle the taillight and brake light functions, plus bright amber LED s that are dedicated for turn signals. They are all mounted inside a ready-to-mount aluminum housing. The lenses are 1/4" thick build-in, flush mount units that measure 15-1/4" long by 1/2" wide clear acrylic with prismatic diffusers. Please note that these are build-in lights that require paint and body skills. Not all vehicles with separate turn signals are adaptable to LED lights. Call us to discuss your application. L58RACL Taillight (pair)... $ Now also with Sequencing Amber Turn Signals! The 12 amber turn signal LED s sequence 4-4-4! Includes everything above + sequencing modules and electronic LED flasher. Billet Frames for L58 Series Lights Red Brake/Taillight Right Light Amber Turns L58RACL-SEQ Taillight (pair)... $ With the turn signals off, all 60 LED s light up with the brake. If one turn signal is on, the other 45 LED s are brake light, etc. If you aren t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58 kits to allow you to surface mount the lens on the outside of the sheet metal while the LED s and housing attach to the inside. The large L58 Frame is 16-3/4" long by just under 1" wide. It protrudes.400" off the surface, accepts our lenses perfectly (as shown). All other parts (lens, LED s, housing, etc) are in the flush mount kits, just add this frame for flat surface mount installation. 3rd Brake Light kits need one frame. Taillight Kits need two frames. L58-FR (large, each)... $60.00

36 34 SMALL 7-1/2" HOT SLOT LED LIGHTS Small Hot Slot Tail Lights This page lists many of the combinations for our small (7-½") Hot Slot lights. With lenses available in red, clear or amber you can use these flush mount lights anywhere you want a clean smooth look. The lenses are 7-½" long, ¼" thick, and ½" wide and all have a prismatic diffuser. The lens cannot be bent so they work best on fenders or roll pans with a ¼" or less of a curve in one direction. Mount them vertically or horizontally. The aluminum light bucket needs 1" of clearance behind the bodywork. We include the necessary mounting studs that weld or fiberglass to your inner body. Hardware and instructions are included with each kit. Each light is packed with bright LED s. These lights are molded into the bodywork of your car and require advanced body skills. 20 LED s 10 LED s An NSRA Best New Safety Product Award Winner! 10 LED s 10 LED s 10 LED s Small Flush Mount LED Taillights Our most popular small taillights. Each bucket has 30 bright red LED s split so brake and turn signals can be set up separately if you want. Dual intensity converters are included to let these lights do double duty as park lights as well. Consider the clear lens option for cars painted lighter colors. L58SM. Pair of small tail lights with Red lens...$ L58SMCL. Pair of small tail lights with Clear lens..$ Amber Park/Turn lights Our same great lights but with amber LEDs and amber lenses. Use these as park and turn lights for both the front and rear. Dual intensity converters included. L58SM-AMB Pair of small park/turn lights with Amber LEDs & lens.$ Small Double-D LED Taillights Our small taillights packed with 2 rows of 30 bright red LED s split That s a total of 120 LEDs! Dual intensity converters are included to let these lights do double duty as park lights as well. Consider the clear lens option for cars painted lighter colors. L58SM-DDR. Pair of small tail lights with Red lens...$ L58SM-DDCL Pair of small tail lights with Clear lens..$ Skinny Hot Slot 3rd Brake Lights Our Small Hot Slots 3rd Brake Skinny 1/4" wide lens! Light with an Ultra Skinny clear lens - it s 7-1/2" long but just 1/4" wide (about.230", actually) for that disappearing- 3rd-brake-light effect. And it s a full 1/2" deep to let you work it into a spot with more curvature. 30 bright red LED s split in an aluminum housing, wire leads and mounting hardware. L58SMBT-SK...$99.00 Small 3rd Brake Light w/ Turn Signals This 3rd brake light has 30 red LEDs split Wire them separately for brake and turn indicators or all together for a larger center brake light. L58SMBT....Small 3rd Brake light with Red lens...$99.00 L58SMBTCL..Small 3rd Brake light with Clear lens...$99.00 Small 3rd Brake light with Double row of LEDs You know you ll be seen with this 3rd brake light. It has 2 rows of 30 red LEDs split Wire them separately for brake and turn indicators or all together for a larger center brake light. L58SMBT-DDR. Small double row 3rd Brake light with Red lens...$ L58SMBT-DDCL Small double row 3rd Brake light with Clear lens...$ Billet Frames for L58SM Series Lights If you aren t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58 kits to allow you to surface mount the lens on the outside of the sheet metal while the LED s and housing attach to the inside. The small L58SM Frame is 9" long by just under 1" wide. It protrudes.4" off the surface, accepts our lenses perfectly (as shown). All other parts (lens, LED s, housing, etc) are in the flush mount kits, just add this frame for flat surface mount installation. 3rd Brake Light Kits need one frame. Taillight Kits need two frames. L58SM-FR (small, each)... $52.00 L58SM-FRP (Polished Frame, each)... $60.00 NOW Available from StreetWorks Polished! Watson s StreetWorks Orders Fax

37 LONG, SHORT, & PEDESTAL LED TAIL LIGHTS 30" One-Piece Hot Slot LED Taillights We ve put 120 super bright red LED s into a single, one-piece taillight kit - single slot red lens measures 30-3/4" long by 1/2" wide to provide an uninterrupted, smooth look. Diffuser attached. Will work in surfaces with gradual curvature up to about 2-1/2". The LED s are dual intensity for taillights and brake/turn signals, or wire the turn signals separately, and are pre-mounted into an aluminum housing. We also provide an aluminum spacer box to fill the gap created by body curvature and to seal out dirt and water - simply cut to the contour of the body. Weld-in or glass-in studs for mounting are included. Note that this is a build-in kit requiring extensive paint and body working skills. L68...$ Billet Pedestal 3rd Brake Light with Red or Amber Turn Signals 15% Brighter! The BEST Pedestal 3rd Brake Lights. Available with clear lens - 15% brighter! 16-5/8" wide, 3/4" high (body), 1-1/8" deep and only 2" tall including the swivel base. 60 super bright red LED s. 3 groups of provide a 30 LED center 3rd brake light and (2)-15 LED turn signal/brake lights. Or add our LED Conversion Kits to get taillight and turn/brake or wire them all as one big and bright 3rd brake light. You ve gotta love this! L61C Clear Lens (top right)... $ L61 Classic Red Lens... $ L61EXT 2-3/8 extension (sold separately)... $39.00 Now also with Amber Turn Signals! Now get this light with the center 35 Red LED s as a dedicated brake light and each end with 8 Super Bright Amber LED Turn Signals - really Bright and super visible to make your ride safer than ever. That s what we re about... your safety. L61CA Clear Lens, Red Brake/Amb. Turns (bottom)... $ Split With Clear Lens 15% Brighter! 15% Brighter! 15 LED s Ya gotta love it! 30 LED s 15 LED s Now available with clear lens - 15% brighter! 8-7/8" wide, 3/4" high (body), 1-1/8" deep and only 2" tall including the swivel base. 30 super bright red LED's. Either light is split into 3 groups of providing (2)-10 LED turn signal/brake lights + 10 LED 3rd brake light only. Or wire them all as one 3rd brake light. L61SMC Clear Lens (top left)... $ L61SM Classic Red Lens (bottom left)... $ New clear lens light with 15 center Red LED s and 4 Bright Amber LED s at each end.. L61SMCA Clear Lens, Red Brake/Amber Turns (not shown)...$ With Clear Lens 15% Brighter! Small Billet Pedestal 3rd Brake Light with Red or Amber Turn Signals NEW Surface Mount Light With Billet Frames We ve taken our new frame and married it to a matching back, added new low profile LEDs to create this surface mount tail light. These slick beauties mount to any flat surface with just 3 small holes. (2 for mounting, 1 for wires.) They measure 5-3/8" by 1" and only 5/8" deep. Lens is clear. Available with a brushed or polished finish. Sold in pairs, or as a single 3rd brake light. Include mounting hardware, instructions. Dual intensity converters come with the taillights. EL89 Surface mount taillights, brushed finish, pr...$ EL89P Surface mount taillights, polished finish, pr...$ EL89B Surface mount 3rd brakelight, brushed finish.$ EL89BP Surface mount 3rd brakelight polished finish...$ NEW Billet Frame for 4-¼" Series lights Mount our 4-¼" LED lights easily with these new frames measuring 5-3/8" by 1" and only 3/8" thick. Combine with our L89 Series LED lights for an easy installation and custom look. Available with a brushed or polished finish. Sold in pairs. EL89-FR Frames, brushed finish, pr... $98.00 EL89-FRP Frames, polished finish, pr... $ /4" Amber Front Light, Red Marker Light or White/Run-Amber/Turn Signal All 3 lights have clear lenses (4-1/4" long, 1/2" wide, 1/4" deep for sanding) with diffuser, dual intensity converter, installation hardware and instructions. The Amber light has super bright LED s L89A Amber LEDs...$ The Red light has 15 super bright red LED s L89R Red LED s...$ Bright White Running Lights and Amber Turn Signals. Have modern Bright White LED Running Lights and Bright Amber Turn Signals all in the same light. L89WA...$129.00

38 36 DRINK HOLDERS Now offering 9 different cup holders! That is more than your Sister-In-Laws Minivan! Swing Out Cup Holder This billet cup holder swings out from under your dash. You attach with the included shoulder bolt. When you aren t using it the wire support snaps into a stowed position and you just swivel the unit out of sight. The unit is 7" long, the ID is 3" and 3" deep when the drink support is down. Only about 1" when stowed Single swing out cup holder... $54.00 NEW! NOW MOTORIZED!!!! We attached a motor to the swing out cup holder. The unit comes pre-assembled with 1 swing out cup holder & motor. The bracket is 4" x 5.5". The motor sticks down 4" below the mounting plate. Use the supplied push button or your own. IT-PSO...$ Swing Out Extension The swing out cup holder has 2 mounting positions but if your dash curves down and under you may need more than 3" of swing. We have solved that problem with this simple extension which can give you up to 6" of swing. Comes with necessary hardware. IT-53E Swing Out Extension Only... $15.00 Flush Mount Pop-Out Dual Drink Holder The guts of this slick German engineered unit come directly from the factory. We ve imported them and designed a billet faceplate. Mount our included bracket behind your dash and just slide this baby in. Also can be mounted under the dash, built into a bench seat or a center console. You will need a spot that s 7-¾" wide and 1-¼" tall. It is 5-¼" deep Pop out dual cup holder with billet faceplate... $ Pop out dual cup holder w/ black plastic face (not shown)... $99.00 Drop in Cup Holders in 3 sizes All of these cup holders include cork inserts in the bottom, a StreetWorks exclusive. At 4-¼" ID and 2" deep the large will handle about any drink out there, while the small holds a soft drink can perfectly. The medium size is made of aluminum. Sold in pairs. Small SS cup holder (pr) Med. Aluminum Cup holder (pr) Large SS cup Holder (pr) (2-5/8 ID by 2" deep) ( 3-¼" ID and is 3" deep) (3.5" ID and 2" deep) $19.00 Black anodized: $ $21.00 Bright aluminum: IT-MAC $19.00 Magnetic Base Billet Beauty with Magnetic Base Our original design that s been a great seller for years. This billet piece has O ring accents that will look great in any ride. The magnet base holds steady to any level steel surface and stows away when you don t need it. The ID is 3" & it s 2-1/8" deep. B-DH Single billet drink Holder...$37.00 Great gift idea! Machined aluminum drink holder with O-rings and a magnetic base! Watson s StreetWorks Orders Fax

39 LIGHTED CUP HOLDERS 37 (White insert not shown) Color Small SS Med. Alum. Black Anodized Med. Alum. Silver Finish Large SS Blue 43010B 43032B IT-MACB 43021B Green 43010G 43032G IT-MACG 43021G Red 43010R 43032R IT-MACR 43021R Amber 43010A 43032A IT-MACA 43021A White 43010W 43032W IT-MACW 43021W Price $62.00/pr $65.00/pr $65.00/pr $68.00/pr If you really want your interior to stand out go for these cup holders with a light disc in the base. These are the same drop in units as on page 36 but with a light disc at the bottom. With 4 styles and 5 colors you can be sure to find just what you need. Just connect the wires to your light circuit (or run them on a separate switch). Already have cup holders? Add some accent lighting with these lighted discs that drop into your cup holders. Just feed the wire through a hole in the bottom of your cup holder and add them to your dash light circuit (or run them on a separate switch). When measuring the diameter of your cup holder the insert should be a loose fit to let the light reflect up. Sold in pairs. Color 2-1/2" dia. 3-1/8" dia. 3-1/4" dia. Blue IL-10B IL-32B IL-21B Green IL-10G IL-32G IL-21G Red IL-10R IL-32R IL-21R Amber IL-10A IL-32A IL-21A White IL-10W IL-32W IL-21W $46.00/pr $49.00/pr $52.00/pr 2 Speed Plus Intermittent Wiper Kit from Specialty Power Windows This flex shaft (cable) wiper system is a great solution for Street Rods and customs being built. This universal Dual-Wiper Drive Kit has two wiper shafts that will accept arms that fit 1/2 inch fine spline knurls or arms that fit 1/4 inch shafts. The output shafts are driven by a remote mounted commercial duty 2 speed wiper motor. This motor has 300 in. lbs. stall torque. The sweep is adjustable from 90 degrees to 160 degrees in 10 degree increments (Both wipers will sweep the same amount). This dual wiper kit has 2-speed intermittent self-park switch included and will accept many of our knobs. This kit is best SUITED FOR CARS UNDER CONSTRUCTION. Some applications will require modifications to the original wiper shaft holes. Comes with written and video instructions. (Kits Do Not Include Arms and Blades) Standard kits come with a 72" drive cable $ Note: Need to hide your wiper motor farther away, say the trunk perhaps? Give us call. We can get you this same kit with a 12 foot drive cable.

40 Catalog 25 INDEX 3rd brake lights A/C vents...10 Backup camera with mirror...ifc* Battery disconnects...23 Blue tooth hands free calling...1 Brake & turn lights Brake switches...21 Cable releases...15 Column levers & switches...12 Cowel vent kit...10 Cup holders Dip sticks...11 Dome lights...30 Door handles...6,16 Door looms...19 Door solenoids...18 Emergency brake...29 Express Window controller...5 E-Stopp...29 Firewall pass throughs & trim...11,13 Flashers...24 Headlights, LED...30 Hinges, hood & trunk...14 Ignition switches...28 Indicator lights...8 Interior lights Knobs...12 Latches, hood & trunk...15 Latches, door...16 LED lighting ,29-35 Mirror with backup screen...ifc* Power window switches Pedals & pedal covers...11 Prop rod... 14, 17 Push button start...28 Radiator fan controller...25 Relays...20 Remote control...26 Security package Switches...1-6,21-22,27-28 Wiper motor...37 Wiring kits...25 * Inside Front Cover Innovative products for today s custom builder 4 Bud Way, Suite 3 Nashua, NH Orders Questions/Tech Fax NATIONAL STREET ROD ASSOCIATION Super Prize Program Sponsor Street of Rods Sponsor Check out SAN at The SEMA Action Network (SAN) is a nationwide partnership between vehicle clubs, enthusiasts and members of the specialty auto parts industry who want to protect their hobby. SAN was designed to help stamp out legislative threats to the automotive hobby and pass favorable laws. THERE ARE NO COSTS, FEES OR HASSLES to participate in the SAN. Join today! It s free! Watson s StreetWorks Cover photo courtesy of GodSpeed Rides, Sarasota, FL.