Tools for every conceivable need... BOLTING TOOLS

Transcription

1 Tools for every conceivable need... BOLTING TOOLS

2 TU SERIES SQUARE DRIVE HYDRAULIC WRENCHES PAGE 4-5 TX SERIES LOW CLEARANCE HYDRAULIC WRENCHES PAGE 6-8 BOLTING SERVICES / RENTAL PROGRAMS PAGE 9 TM PUMPS FOR USE WITH HYDRAULIC WRENCHES PAGE 10 BACKUP WRENCHES PAGE 11 PNEUMATIC TORQUE WRENCHES PAGE CLASSIC MECHANICAL CLICK TORQUE WRENCHES PAGE CLASSIC MECHANICAL TORQUE MULTIPLIERS PAGE POWER SPLITTER HYDRAULIC NUT SPLITTERS PAGE POWER SPREADER FLANGE SPREADERS PAGE 25 HYDRAULIC VERTICAL LIFTING & SPREADING WEDGE PAGE HYDRAULIC BOLT TENSIONERS PAGE SPRING BALANCERS PAGE IMPACT WRENCHES PAGE 35 3

3 Technical TU SERIES SPECIFICATIONS Simply... The Most Advanced Wrench Ever Produced Faster Stroke! Anti-Back Lash Mechanism! Hands-Off Operation! Accurate Repeatability! Are only a few of the Improvements that Less Moving Parts! Patented Mono-Body Housing! Unique Design to Fit Every Application! has brought to the Industry! Model No. TU-2 TU-3 TU-7 TU-11 TU-27 TU-60 Square Drive 3/ /2 1.1/2 2.1/2 2.1/2 Min. Torque Kg-m(Ft/Lbs) 17(127) 45(330) 102(740) 152(1,100) 376(2,720) 801(5,800) Max. Torque Kg-m(Ft/Lbs) 175(1,270) 460(3,330) 1020(7,400) 1520(11,010) 3760(27,200) 8018(58,000) Output Accuracy +/-3% +/-3% +/-3% +/-3% +/-3% +/-3% Repeatability 100% 100% 100% 100% 100% 100% Duty Cycle 100% 100% 100% 100% 100% 100% Tool Weight Kgs/(Lbs) 1.77/(3.90) 4.09/(9.00) 8.64/(19.00) 13.18/(29.00) 31.81/(70.00) 59.00/(130.00) Height Dimensions Note : Length 1 Radius Length 2 All tool weights include Couplers, Swivels, Reaction Arm and Internal Oil. The Patented Mono-Body Housing is standard on all models. Width 1 Width 2 Width 3 Model No. TU-2 TU-3 TU-7 TU-11 TU-27 TU-60 mm inch mm inch mm inch mm inch mm inch mm inch Height Length Length Radius Width Width Width TU Accessories Extended Reaction Tube TORCUP has in stock application specific accessories to fit on your job! 4 Standard Square Drive Direct Socket Drive Standard Reaction Arm Allen Hex Drive Adapter Extended Reaction Arm Boot Call TORCUP today for help with your application specification!

4 TU SERIES FEATURES TU Square Drive - The Performer The Multi-Application TU Series is the tool of choice on every application in every industry. Whether in a steel mill, on an offshore drill platform or diving to the ocean bottom a TU Wrench will OUTPERFORM every other method of tightening threaded fasteners. TU-2 Achieves Proper Torque in Seconds! TU-10 The Workhorse in Power Generation Tensioners...Impact Wrenches... Nut Runners... are no match for A TU Hydraulic Wrench on any application!! Other Hydraulic Wrench manufacturers? Not a chance!! Patented Mono-Body Housing A TorcUP exclusive!! 2 Balanced Drive Rod Side load free piston movement. 3 Never-Lock Drive Pawl Ensures tool will NEVER lock up. 4 Anti-Back Lash Mechanism Provides hands free operation. 5 Laser Engraved Torque Chart No more searching for charts. 6 Multi-Tooth Ratchet Allows for 27 degree torque stroke accuracy. 7 One Piece Drive Plate Robust alloy provides for small nose radius. 8 Push-Through-Drive Simply push to switch from loosen to tighten. 9 Single Seal Piston Assures extended maintenance free operation. 10 Direct Housing Reaction Allows use of tool without reaction arm. 11 Steel Reaction Boot Field replaceable feature protects reaction arm. 12 Long Length Reaction Arm Allows for reaction on all applications. 13 Reaction Arm Release Button Protected within reaction arm housing x 360 Swivel Allows hose to be cleared on all applications. 15 No-Drip Quick Connect Couplers Assures easy and safe operation. 16 Steel Alloy Piston Robust composition allows for longer operation cycle. 5

5 Technical TX SERIES SPECIFICATIONS Simply... The Flattest Hydraulic Wrench Ever Produced Flat Design from Cylinder to Link! Unique Peanut Shaped Piston! Direct Flow Oil Distribution for Faster Stroke! Are only a few of the reasons why the Less Moving Parts! Accurate Repeatability! Hands-Off Operation! TX is the only tool of its kind! Model No. TX-2 TX-4 TX-8 TX-16 TX-32 Tool Hex from 19mm / 3/4 25mm / 1 50mm / 1.7/8 65mm / 2.5/8 80mm / 3.1/8 to 60mm / 2.3/8 80mm / 3.1/8 105mm / 4 115mm / 4.5/8 155mm / 6.1/8 Min. Torque Kg-m (Ft/Lbs) 26 (192) 54 (395) 115 (830) 215 (1,560) 445 (3,220) Max. Torque Kg-m (Ft/Lbs) 260 (1,928) 540 (3,950) 1192 (8,630) 2293 (16,600) 4924 (35,650) Output Accuracy +/- 3% +/- 3% +/- 3% +/- 3% +/- 3% Repeatability 100% 100% 100% 100% 100% Duty Cycle 100% 100% 100% 100% 100% Corrosion Protection Standard Cylinder Weight Kgs / (Lbs) 1.59 / (3.50) 2.73 / (6.00) 5.32 / (11.70) 7.27 / (16.00) / (26.00) Link Weight from Kgs / (Lbs) 1.09 / (2.40) 2.45 / (5.40) 5.41 / (11.90) 9.55 / (21.00) / (29.00) to Kgs / (Lbs) 1.59 / (3.50) 3.45 / (7.60) 6.59 / (14.50) / (28.00) / (39.50) Width Length Height 6 Dimensions Model No. Length Height Width Radius Note : TU Accessories Stack Socket TX-2 TX-4 TX-8 TX-16 TX-32 mm inch mm inch mm inch mm inch mm inch All tool weights include Couplers, Swivels and Internal Oil. The Patented Peanut Shaped Cylinder Bore is standard on TX-2, TX-4 and TX-8 models. Hex Reducer Insert Square Drive Adapter Low Point Reaction Paddle Extended Reaction Arm Radius When clearance is an issue... TX is the answer! TX accessories allow you to convert your low profile system into a multi-application system simply by inserting hex accessories. Call TORCUP to solve any of your limited area, low clearance bolting applications.

6 TX SERIES FEATURES TX Low Profile - The Solution Clearance ABOVE The Nut - No Problem For A TX! Clearance BEHIND The Nut - No Problem For A TX! Clearance BETWEEN The Nut - No Problem For A TX! The Patented Peanut Shape Piston Design assures That your application will have the correct torque applied every time. TX saves time when precise torque is required Tensioners - Too Big To Fit! Multipliers - Too Big To Fit! Nut Runners - Too Big To Fit! Impact Wrenches - Too Big To Fit! Other Hydraulic Wrenches - Too Big To Fit! TX cylinder and link are the same width. A TorcUP exclusive. 1 Patented Peanut Shaped Cylinder Fit both the cylinder and link in confined areas. 2 Engagement Rod Automatically engages link on the first stroke. 3 Never-Lock Drive Pawl Ensures tool will NEVER lock up. 4 Multi-Tooth Ratchet Allows for 27 degree torque stroke accuracy. 5 One Piece Drive Plate Robust alloy provides for small nose radius. 6 Link Pin One pin for link to cylinder engagement. No tools required. 7 In-Line Reaction Pad Assures torsion free reaction every time. 8 Steel Alignment Pin Assures equal load displacement between side plates. 9 Piston Tension O-Ring Tension locks piston seal into Peanut bore. 10 Completely Flat Design Cylinder and link width are equal for tight fits x 360 Swivel Allows hose to be cleared on all applications. 12 Teflon Piston Seal Patented technology provides years of maintenance free use. 13 Slider Prevents wear of piston or drive plate. Reduces costly repairs. 7

7 TX SERIES HEX LINK PART NUMBERS 8 TX-2 Link Hex TX-4 Link Hex TX-8 Link Hex TX-16 Link Hex TX-32 Link Hex Number Size Number Size Number Size Number Size Number Size TX-2RL012 3/4 TX-4RL100 1 TX-8RL /8 TX-16RL /8 TX-32RL /8 TX-2RL013 13/16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL014 7/8 TX-4RL /8 TX-8RL200 2 TX-16RL /4 TX-32RL /4 TX-2RL015 15/16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL100 1 TX-4RL /4 TX-8RL /8 TX-16RL /8 TX-32RL /8 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL /8 TX-4RL /8 TX-8RL /4 TX-16RL300 3 TX-32RL /2 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL /4 TX-4RL /2 TX-8RL /8 TX-16RL /8 TX-32RL /8 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL /8 TX-4RL /8 TX-8RL /2 TX-16RL /4 TX-32RL /4 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL /2 TX-4RL /4 TX-8RL /8 TX-16RL /8 TX-32RL /8 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL /8 TX-4RL /8 TX-8RL /4 TX-16RL /2 TX-32RL400 4 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL /4 TX-4RL200 2 TX-8RL /8 TX-16RL /8 TX-32RL /8 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL /8 TX-4RL /8 TX-8RL300 3 TX-16RL /4 TX-32RL /4 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL200 2 TX-4RL /4 TX-8RL /8 TX-16RL /8 TX-32RL /8 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL /8 TX-4RL /8 TX-8RL /4 TX-16RL400 4 TX-32RL /2 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL /4 TX-4RL /2 TX-8RL /8 TX-16RL /8 TX-32RL /8 TX-2RL /16 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-2RL /8 TX-4RL /8 TX-8RL /2 TX-16RL /4 TX-32RL /4 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-4RL /4 TX-8RL /8 TX-16RL /8 TX-32RL /8 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-4RL /8 TX-8RL /4 TX-16RL /2 TX-32RL500 5 TX-4RL /16 TX-8RL /16 TX-16RL /16 TX-32RL /16 TX-4RL300 3 TX-8RL /8 TX-16RL /8 TX-32RL /8 TX-4RL /16 TX-8RL /16 TX-32RL /16 TX-4RL /8 TX-8RL400 4 TX-32RL /4 TX-32RL /16 TX-32RL /8 TX-32RL /16 TX-32RL /2 TX-32RL /16 TX-32RL /8 TX-32RL /16 TX-32RL /4 TX-32RL /16 TX-32RL /8 Change sizes by removing single link pin TX-32RL /16 TX-32RL600 6 All TX series links are available in MM sizes also. Consult us for part numbers. TX-32RL /16 TX-32RL /8

8 QUADRA-TORC SYSTEM Quadra-Torc - Fast-Accurate-Even Bolt Load The primary focus of the Quadra-Torc System is to eliminate the common Criss-Cross bolt tightening pattern that causes constant crush or over torque of gaskets. With the Quadra-Torc System multi torque units are utilized along with our Quadra-Torc Hydraulic Pumps. Once the wrenches are in place a single operator can apply even load at the push of a button. The Quadra-Torc System will evenly close the gap and apply equal torque to +_ 3% accuracy! Get Into Speed Torque Mode With Quadra-Torc! Uneven load using one tool Quadra-Torc four tool system Even and precise load with Quadra-Torc BOLTING SERVICES We Offers A Complete Hydraulic Bolting Service... Our Bolting Services offer the following advantages : Safe - Our supervisors ensure a trouble free job. Our bolting technicians have undergone training from M/S TorcUP (USA) and our services meet MMS, USCG and DSHA regulations. Fast - Skilled and experienced crew will allow the job to be completed faster and better than a First Time crew. Economical - Since most companies use hydraulic bolting tools for a small part of the year, in a lot of cases it does not justify the large investment needed to purchase the tools. Time Savings - As our company carries a fleet of hydraulic bolting tools at our facility, our crew can be on site and on the job in matter of days, versus the weeks and sometimes months it takes for a company to import and commission a new set of hydraulic bolting tools. RENTAL PROGRAMS For customers who do not have the need for our crew, they have the option of renting our tools at a nominal cost. We recommend an orientation of our tools at our factory. Please contact us for rental information and prices. 9

9 Electric POWER PACKS Quadra-Torc - (4 Port) EP1000 (Shown with Mono-Port) EP High Flow - High Speed for Heavy Duty Application Quadra-Torc Multi-Port Manifold (Max. 4 Ports). Cool running continuous duty axial piston pump. Single phase induction motor. 115V and 230V available. Starts under full load. Runs on reduced voltage. Quiet operation (approx ,000 PSI). Rugged remote pendant to control motor and valve. Resvr. Easily adjustable pressure control knob. Size Auto-dump relieves oil pressure from hoses. (Gal.) Completely enclosed motor housing and electronics. 2 Gallon oil reservoir. Precise PSI/BAR pressure gauge. Quick-connect no-drip couplers with safety locking collar. Supplied with dual non-conductive high pressure hose with couplers. Pneumatic AP1000 (Shown with Mono-Port) Control Valve Type Retract pressure is preset at 1,300 PSI. Motor Specifications Flow 115 VAC Weight 600 psi 10,000 psi kg lbs 2 Solenoid 3 Way/2 Pos. 1.5 HP Single Phase lpm 0.82 lpm AP High Flow - High Speed for Heavy Duty Application Quadra-Torc Multi-Port Manifold (Max. 4 Ports). Cool running continuous duty axial piston pump. Powerful 1.5HP industrial duty air motor. Runs on 50 cfm / 80 PSI of air. Quiet operation (approx ,000 PSI). Resvr. Rugged remote pendant to control motor and valve. Size Easily adjustable pressure control knob. (Gal.) Auto-dump relieves oil pressure from hoses. Filter-lubricator for long trouble free operation. 2 Gallon oil reservoir. Precise PSI/BAR pressure gauge. Quick-connect no-drip couplers with safety locking collar. Supplied with dual non-conductive high pressure hose with couplers. Control Valve Type Motor Specifications Retract pressure is preset at 1,300 PSI. Standard Roll Bar Dimensions : 25-7/16 L x 20-1/2 H x 166-3/4 W Flow 50 cfm/ 90psi Weight 600 psi 10,000 psi kg lbs 2 Solenoid 3 Way/2 Pos. 1.5 HP Rotary Air 9.83 lpm 0.82 lpm 27 59

10 QUADRA-TORC PUMP ACCESSORIES Hoses available in all lengths (15 hose standard with all pumps) No-Drip Quick-Connect Couplers (Standard on all TorcUP equipment) BACKUP WRENCHES Features : Heavy duty industrial construction. Ergonomic and Safe. Totally Mechanical - No Hydraulic. Easy to release. Eliminates Striker Wrenches, Shims a Vice Grip Style Backup Wrenches. Stock in Standard and Metric Sizes. Technical Details: TBW-1 Wrench Handle Metric Sizes Standard Sizes Part No. mm Part No. mm Part No. inch Part No. inch BC-19M 19 BC-46M 46 BC-012 3/4 BC BC-22M 22 BC-50M 50 BC-014 7/8 BC /16 BC-24M 24 BC-55M 55 BC BC /8 BC-27M 27 BC-60M 60 BC /8 BC /16 BC-30M 30 BC-65M 65 BC /4 BC /4 BC-32M 32 BC-70M 70 BC /16 BC /16 BC-36M 36 BC-75M 75 BC /8 BC /8 BC-41M 41 BC-80M 80 BC /16 11

11 PTW SERIES PNEUMATIC TORQUE WRENCH Features : PTW 06 Torque Range lbs ft / Nm Free Speed 35 rpm Weight 3.5 Kg PTW 10 Torque Range lbs ft / Nm Free Speed 25 rpm Weight 4.8 Kg PTW 24 Torque Range lbs ft / Nm Free Speed 15 rpm Weight 5.9 Kg PTW 40 Torque Range lbs ft / Nm Free Speed 14 rpm Weight 8.3 Kg

12 RAPTOR SERIES PNEUMATIC TORQUE WRENCH Features : RAPTOR 500 SINGLE SPEED Torque Range lbs ft / Nm Free Speed 45 rpm Weight 4.1 Kg RAPTOR 1000 SINGLE SPEED Torque Range lbs ft / Nm Free Speed 25 rpm Weight 4.5 Kg RAPTOR 2000 SINGLE SPEED Torque Range lbs ft / Nm Free Speed 20 rpm Weight 5.5 Kg RAPTOR 3000 SINGLE SPEED Torque Range lbs ft / Nm Free Speed 5 rpm Weight 7.3 Kg RAPTOR 6000 SINGLE SPEED Torque Range lbs ft / Nm Free Speed 3 rpm Weight 9.1 Kg. Max air consumption is 40 CFM at 90 psi full torque

13 FRL Unit Wheel Extension PTW SERIES ACCESSORIES It is used to regulate the air pressure and properly lubricate the air motor for ultimate life. Air pressure regulates and controls torque output of Pneumatic torque wrench. All tools must be used with an FRL unit. It is strongly advised not to exceed the maximum amount of air pressure. L1 L3 L2 D2 D1 H Technical Specification: Model No. Sq. Drive L1 L2 L3 D1 D2 H inch mm mm mm mm mm mm PE / PE / PE / PE PE PE 1608H Reaction Arm: Blank Reaction Double End Blank Standard Reaction Deep Reaction RAPTOR SERIES ACCESSORIES Part No. RPA WD Description Raptor 500 & 1000 Weld Blank Extended Arm RPA WD Raptor 2000 & 3000 Weld Blank RPA SARM RPA SARM Raptor 500 & 1000 Straight Reaction Arm Raptor 2000 & 3000 Straight Reaction Arm Standard Arm RPA LARM Raptor 500 & 1000 Extended Reaction Arm RPA LARM RPA-RARM RPA-RARM Raptor 2000 & 3000 Extended Reaction Arm Raptor 500 & 1000 Extended Reaction Arm Raptor 2000 & 3000 Extended Reaction Arm Weld Blank Custom Arms Available 14 Custom RP-FRL Custom Reaction Arms Available Filter / Regulator / Lubricator Straight Arm

14 TORQUE WRENCHES The ever-increasing need for accurate torque tightening throughout industry, in both manufacturing and servicing demands the use of reliable, accurate torque wrenches. There are many reasons for insisting on TorcUP Torque Wrenches from TorcUP. For certainty and safety ask for TORCUP by name and accept no substitutes. ACCURATE IN USE Machanism pivots on the square drive. Guaranteed accuracy wherever the wrench is grasped. DURABLE Hard-wearing, heavy-duty mechanism. Retains original accuracy of + - 3% for up to 10,000 operations without Recalibration. SAFETY IN USE Progressive torque buildup to the selected setting easily detected by sight, sound and feel. Torque setting cannot be exceeded by accident. Avoids mechanical damage and risk of injury. ACCURATE IN DESIGN Guaranteed accuracy of + - 3% throughout the torque Range. Ensures safety and avoidance of damage. EASY TO USE TORQUE SCALE Large, clear scale markings in Nm, kg/m, lbf/in and lbf/ft. Accurate setting easily obtained. CONVENIENCE IN USE Push-through, user replaceable square drive. Enables wrench to be turned over and used in opposite direction: with no need to return wrench to manufacturer for drive repair. COMPACT Head no wider than a typical socket or, in the case of ratcheting versions, no bigger than a typical ratchet handle head. Improved access in confined spaces. ROBUST Extremely strong construction. Resists all but the most severe accidental damage. EASE IN USE Length calculated to enable a controlled effort at all torque settings essential in all torque limiting situations. Avoids accidentally exceeding required torque setting so preventing damage and safety risks. SECURITY Secure and rapid torque setting adjustment. Easily adjusted yet Impossible to alter by accident-ensures accurate setting at all times. TYPES OF TORQUE WRENCHES TorcUP Torque Wrenches have proved themselves both reliable and accurate over many years of full service, mastering every conceivable nut tightening operation in all areas of industry. TorcUP Torque Wrenches are available in following three types: Standard Torque Wrenches Adjustable click type torque wrenches. Ratcheting Torque Wrenches In built ratcheting mechanism provisional for ease of operation without effecting accuracy & life. Production Torque Wrenches These torque wrenches are available in both standard & ratcheting but have a fixed torque value set to prevent any tempering by operation. 15

15 TORQUE WRENCHES Classic Mechanical - Torque Wrenches 3/8 Square Drive Ref. Ratchet? Torque Range Square Drive N.m Kg.m Ibf.in Ibf.ft mm inch Length Weight mm inch kg lbs PVT-100A / PVTR / PVT-300A / PVTR / PVTR / All models are supplied complete with sturdy blow moulded box and a calibration certificate fully traceable to national standards and suitable for ISO-9000 assessment purposes. 1/2 Square Drive 16 Ref. Ratchet? Torque Range Square Drive N.m Kg.m Ibf.in Ibf.ft mm inch Length Weight mm inch kg lbs PVT-600A / PVT-1200A / PVTR / PVT-2000A / PVTR / PVT-3000A / PVTR / All models are supplied complete with sturdy blow moulded box and a calibration certificate fully traceable to national standards and suitable for ISO-9000 assessment purposes.

16 TORQUE WRENCHES Classic Mechanical - Torque Wrenches /4 & 1 Square Drive Ref. Ratchet? Torque Range Square Drive Length Weight N.m Kg.m Ibf.ft mm inch mm inch kg lbs PVT / PVTR / PVT / PVTR / PVT PVTR / PVT PVTR TQW TQW-R TQW TQW-R All models are supplied complete with calibration certificate fully traceable to national standards and suitable for ISO-9000 assessment purposes. Torque Wrench Extensions Ref. Torque Range Square Drive N.m Ibf.ft mm inch Length Weight mm inch kg lbs PTWX PTWX PTWX-1500/ square drive torque wrench extension. These products have been developed to meet the torque tightening needs in excess of 1000N.m. This method of increasing the range of the PVT-8400 has the major benefit of being more manageable in terms of physically applying the torque load (often a two man job), and from a transport and storage point of view. The extension fits between the ratchet head and the socket. The required torque value is converted to the torque wrench reading using the supplied chart and the load is applied in the normal way. 17

17 3 4 LIGHT WEIGHT TORQUE WRENCHES Light Weight Mechanical - High Strength Alloy Body Features : Material : Light weight high strength alloy body reduces its weight to half of the equivalent conventional Torque Wrenches. Compact Size : Compact in size with multiple extensions, ensures use at restricted places. Light Weight & Compact Packing makes handling & transportation easy. Torque Indication : Short path actuation of gears provide clear impulse & audible signal on reaching set torque values. Variable Extension : Extension bars can be adjusted to get different extension length as per the operator s requirement. Pin Locking : Pin Lock mechanism at Sq. Drive for positive safe locking. Graduation : Single Scale Graduation for clear reading, Standard scale graduation is in Nm but can be supplied in other scales as required on request. Longer Range : 140 Nm to 3000 Nm covered in just four models. Accuracy : Better than +_3% with very high repeatability. Calibration : Calibration Traceable to National Standards. Ratcheting Action : Suitable Ratchet Adaptors available to convert to ratchet type Torque Wrench. Packing : Standard packing is in individual sturdy cardboard box. On request also available in metallic case. Technical Details: Model No. Range Sq. Drive OAL Extension Weight Nm Kgf m inch mm mm kg LTW / LTW / LTW / LTW / / TORQUE SCREW DRIVER Features : 1/4 Square Drive Spindle to suit all Standard Sockets & Screw Driver Bits. Bi-Directional operation with consistent repeat accuracy. Concealed adjustment mechanism to prevent accidental re-setting during use. Technical Details: 18 Model No. Range Sq. Drive OAL Weight Lbf. Ins Kgf cm N cm inch mm kg PTS / PTS / PTD /

18 TORQUE MULTIPLIERS Handtorque - Multipliers 25 Revolutions Input 200 N.m = Torque = Velocity Output 5000 N.m 0.84 Revolutions What is a Torque Multiplier? It is a simple gear box, works on the principle of Epicyclic Gearing. The given load at the input gets multiplied as per the multiplication factor & transmitted at the output, there by with a minimum efforts you achieve greater load. How They Work Handtorque multipliers incorporate an Epicyclic or Planetary gear train having one or more stages. Each stage of gearing increases the torque applied by a factor of 5, allowing to offer multipliers in ratios of 5:1, 25:1 and 125:1. In the planetary gear system, torque is applied to the input gear or Sun gear. Three or four planet gears whose teeth are engaged with the sun gear and therefore rotate. The outside casing of the multiplier, or Annulus is also engaged with the planet gear teeth, and would normally rotate in the opposite direction to the sun gear. A reaction arm prevents the annulus from rotating, and this causes the planet gears to orbit around the sun. The planet gears are held between input & output plate which also holds the output square drive. Therefore as the planetary gears orbit around the sun gear, output plate the and so the square drive turns. Without the reaction arm to keep the annulus stationary, the output square will not apply torque. Why use a Torque Multiplier? Safety - Use of long levers can be dangerous. Torque multipliers mean a reduction in the lever length or operator effort by a factor of 5, 25 or 125. Space Limitation - The use of a long lever may be impossible due to restricted space. Accuracy - Torque will be applied most accurately when it is applied smoothly and slowly. Torque multipliers enable this by removing much of the physical effort from the tightening task. Advantages Of Torque Multipliers : The ratio stated is the true torque multiplication factor. No correction charts are needed to determine torque output. Strong, safe Anti Wind-Up Ratchet available on most models for safe and comfortable operation. A wide range of alternative reaction arms are available as per customers requirement, making the Torque Multiplier adaptable to many applications. 19

19 TORQUE MULTIPLIERS = Torque = Reaction Force Anti Wind-Up Ratchet (AWUR) : With any high ratio gearbox (25:1 or more) a certain amount of wind-up (spring) has to be taken up before any useful tightening work is applied to the nut. Each time the input device is released, the wind-up will rotate it back against the direction of operation. Multiplier behaves like a very stiff Spring The Anti Wind-Up Ratchet retains all of the wind-up forces as they are created, with the following benefits : 1. The torque input device can not fly backwards against the direction of operation if it is suddenly released. 2. Without an Anti Wind-Up Ratchet, it will often be necessary to continue to make 360 sweeps with the torque input device otherwise the multiplier will unwind. However, obstructions will often make this impossible. Multiplier will achieve maximum torque only after the Spring has been taken up. 3. With an Anti Wind-Up Ratchet fitted, the multiplier becomes locked onto The nut because the reaction plate is held hard against the reaction point. This means that even used upside down, the multiplier will support it s own weight. In this application, if it takes more than 180 to take up the wind-up at the required torque, this tightening operation will be impossible without an Anti Wind-Up Ratchet. Standard Series Anti Wind-Up Ratchet. 20 Safety Note : Additional support is recommended as failure in the bolt, socket or multiplier will release the wind-up forces and cause the multiplier to drop.

20 TORQUE MULTIPLIERS Handtorque - Standard Series A B C Features : Accuracy better than +_ 4%. Precision tightening and loosening of all heavy duty fasteners. Low energy input with high torque transfer. Higher capacity multipliers are furnished with strong ratchets (Anti-wind up mechanism) allowing jobs to be performed easily, efficiently, and safely. Precision Manufacturing ensures long life and premier quality. A groove on output Square breaks if over loaded in excess of 20% of its capacity. Highest possible load factor is guaranteed due to design and use of forged components. Standard Series, to N.m Input Output A B C C Capacity Model No. Square ø Ratio Square min max Weight* N.m Ibf.ft inch inch mm mm mm mm kg lbs BTM-2/ / BTM / BTM-5/ / BTM /4 1.1/ BTM-6/ /2 1.1/ BTM /4 1.1/ BTM-7/25 Fitted with AWUR /2 1.1/ BTM-9/25 Fitted with AWUR /4 1.1/ BTM-9/125 Fitted with AWUR /2 1.1/ BTM-11/25 Fitted with AWUR /4 2.1/ BTM-11/125 Fitted with AWUR /2 2.1/ BTM-13/125 Fitted with AWUR /4 2.1/ * Including reaction plate. 21

21 Features : Compact, Heavy Duty Torque Multiplier with a torque multiplication of 5:1. Accuracy better than +_ 4% with high repeatability. Provided with detachable reaction handle. Optional offset reaction arm also available on demand. Supplied in sturdy molded plastic carrying case for better storage & handling. NANO SERIES TORQUE MULTIPLIER Model No. Capacity Sq. Drive (inch) A B Weight (Kg) Ratio Kgm. Lb.ft. Nm. input Output mm mm Without Box With Box NANO :1 1/2 3/ NANO :1 3/ SLIM TORQUE MULTIPLIERS Slim - Compact In Size A 198 A STM - 01 STM - 02 STM - 03 D A D B B B C D C C Features : Compact Size : Compact in size hence can be used in constrained areas. Ratio : Higher reduction ratio for low input. Safety : Safety shear pin at the input provisioned to prevent overloading. AWUR : In built Anti-Windup Mechanism reduces operators effort. Can be used with non-ratchet type torque wrench. Pin Lock : Pin Lock mechanism at output Sq. Drive for positive locking of socket. Reaction Arm : Different type of reaction arm available as per user requirement. Accuracy : Better than +_ 4% with very high repeatability. 22 Model No. N m Torque Capacity Lb ft Kg m Reduction Ratio Sq. Drive input output Weight STM : 8 1/2 F PVTR STM : 10 1/2 F STM : 10 3/4 F 1.1/ PVTR Note : STM - 2 and STM - 3 are fitted with Anti-Wind-Up Ratchet (AWUR) Mechanism. STM-1 can be provided with AWUR. O.D. mm kg Recommended Torque Wrench

22 POWER SPLITTERS For Removing Frozen Nuts The Right Way Features : Safe : No sparks. No flames. No risk to volatile surroundings. No hammers or impact needed. No flying fragments. Fast : Cuts a 3 nut in 20 to 30 seconds vs. approx. 20 minites with a hammer & chisel or torch. Easy Set up : You can be up and away in less than 5 minites. No Damage to bolt or stud threads by calibrating the chisel so that only the nut is cut. Versatile : Power splitters cut the hardest nuts. The range of models offered and the range of each model compares very favorably vs. the competition. Power Splitter Power Splitter Angle Headed Model - AS-105 to Model - AS-506 Power Splitter A D E SWING C B F Model - AS-100AH to Model - AS-314AH For removing Frozen nuts the right way. Other Anglesplitter sizes quoted on request. A D E C D SWING B F 15 Stud Diameter Across The Flats Model Nut A/F A B C D E F Weight No. mm inch mm inch mm mm mm mm mm kg lbs AS /16-7/ /8-1.7/ AS /8-1.1/ / AS /4-1.1/ /16-2.3/ AS /8-1.3/ /4-2.3/ AS /4-2.1/ /4-3.1/ AS / /8-3.7/ AS /2-2.3/ /4-4.1/ AS / / AS /4-3.1/ /8-5.3/ Power Splitter Angle Headed Model No. Stud Diameter Nut A/F Across The Flats A B C D E F * If you have an application not covered by the models above just call us and we will provably be able to design a model for you. Weight mm inch mm inch mm mm mm mm mm kg lbs AS-100AH /16-5/ / AS-105AH /16-7/ /8-1.7/ AS-200AH /8-1.1/ / AS-204AH /4-1.1/ /16-2.3/ AS-210AH /8-1.3/ /4-2.3/ AS-308AH /4-2.1/ /4-3.1/ AS-314AH / /8-3.7/

23 POWER SPLITTERS Power Splitter Vs. the competition : Versatile : One model cuts a wide range of nut sizes (6-8) Vs. 1-2 of the competition. Hydraulic Cylinders and other common parts among models reduce inventory (refer parts list below for common parts). Flexible : Housing is designed to fit virtually any application so you can work from more angles and in tighter spaces. Power Splitter fits all API and ANSI flanges and all valve bonnets. It cuts virtually any shape nut (Hex, square and 12 point). Durable : Our heat treatment processes and cryogenic treatment of housings and chisels ensure life second to none. Chisels can be resharpened after dozens of cuts to prolong life. Precise : Chisel can be callibrated by using suitable holder to cut the nut wall precisely so that the bolt or stud does not get damaged. No damage to your equipment and no damage to your Power Splitter. Power : Power to weight ratio is the best in the industry and it is easier to handle. Economical : Price is among the most competitive available anywhere in the world. Warranty : For a full 6 months from defects in materials or workmanship. Variety of Pumps : Power splitter can be supplied with a variety of hand, foot operated, electric or air powered pumps. Please contact us for choices of available pumps. Power Splitter Part List : TYPE 1 POWER SPLITTER with externally threaded chisel holders; used in nut splitters with internal threads in the piston rod. TYPE 2 POWER SPLITTER that have a cylinder with threaded Bolt holes in the piston rod and chisels holders that use socket head cap screw. 24 Sr. No. Description 1 Housing 2 Set Screw 3 Allen Wrench 4 Chisel 5 Chisel Holder 6 Spacers Set 7 Set Screw for Chisel Holder 8 Allen Wrench for Chisel Holder 9 Hydraulic Cylinder 10 Quick Disconnect Female Coupler 11 Allen Wrench for Cap Screws 12 Socket Head Cap Screw (2 each) 13 Handle for Housing (2) 14 Hex Nut for Handle (2) 15 Lifting Eye 16 Tool Box (Not Shown) Note : Shades overlapping into multiple model numbers indicate common parts. Type 1 Model Type 2 AS100 AS105 AS200 AS204 AS210 AS308 AS314 AS404 AS500 AS506

24 FLANGE SPREADERS One-Size-Fits-All Choose Manual or Hydraulic Lightweight. Only 7.7 Kg (17 lbs). Jaws open parallel. No drift. It stays where you place it. Easy one person operation. Universal. One-Size-Fits-All Kg (10,000 lbs) applied force at tips. Opens to 76.2 mm (3 inches). HS10K Hydraulic Model MS10K Manual Model With the Hydraulic Power-Spreader, HS10K, a hydraulic cylinder replaces the ratchet handle. A standard hand pump powers 1 Power-Spreader, or a pair, with ease. Again, you are supplied with 4535 kg (10,000 lbs) of force and 76.2 mm (3 ) of gap; ample for gasket replacement or turning of blinds. Using the manual Power-Spreader, MS10K, simply place the tips between the flange faces and turn the ratcheted handle. The ratcheting action is transformed into 4535 Kg (10,000 lbs.) Of spreading force and creates up to 76.2 mm (3 ) of gap. HYDRAULIC FLANGE SPREADERS Hydraulic Flange Spreaders are used for safety opening pipe flanges. Available in capacities of 5 tonnes and 10 tonnes the versatility of both models enables the user to open flanges up to 92mm thick. Operated with a standard hydraulic hand pump and connecting hose and supplied in a handy steel storage case, Hydraulic Flange Spreaders can be operated individually, or as a pair when opening large diameter flanges. With Hydraulic Flange Spreaders it takes minutes open the toughest flanges without the risks of sparks caused by hammer blows and chisels. B H E A G F D J C I ( All Dimensions in MM ) Capacity Stroke Oil Capacity Max. Flange Flange Standard Optional Stud Size Model No. Thickness Diameter Wedge Wedge 3 tonnes mm cm mm mm(inch) mm mm mm FS x mm(45 ) FS x mm(75 ) Model No. A B C D E F G H I J min max FS FS

25 HYDRAULIC VERTICAL LIFTING WEDGE HVW-10 The HVW-10 has been developed as an easy to use / cost effective way to find solutions to heavy lifting where minimal clearance is available. It will lift objects vertically where an access gap of 3/8 (9.5mm) or more is available. The HVW-10 will lift an object fast, secure and safe with a lifting force of 16 Tons per tool. Multiple units can be used if greater lifting force is needed. The Most Practical/Safe Option : The HVW-10 can be used for : Lifting Heavy Machinery Equipment Installation Plant Maintenance Special Features : Access gap of only 3/8 (9.5mm) needed 3/4 (19.0mm) of vertical lift available from each step Max. height of 50mm on 4th step Automatic spring return retraction. Interlocking first step ensures safe hold. No Slippage due to locking. Will lift in a straight vertical place. Equipment Alignment Assisting with Toe Jack Access Operating Benefits : Time / Cost Savings Lowest Weight / Lifting Force Ratio. Precise Easy to set up and use. Safe Minimal Maintenance Fast for labour & time savings Use multiple units for greater lifting Kit Options : 26 Mini Kit 1 x Hydraulic Vertical Lifting Wedge Assembly 1 x Safety Block 1 x Stepped Block 1 x Instruction Manual 1 x Carry Case Standard Kit 1 x Hydraulic Vertical Lifting Wedge Assembly 1 x 10,000 psi (700 Bar) Two Stage Hydraulic Hand Pump 1 x 10,000 psi (700 Bar) Hydraulic Hose Length 6 feet 1 x Safety Block 1 x Stepped Block 1 x Instruction Manual 1 x Carry Case

26 HYDRAULIC SPREADING WEDGE HSW-10 The Spreading Wedge has been developed as the simple cost-effective solution for flange spreading. The Practical Solution : The HSW-10 can be used during : Commissioning Construction Routine Maintenance Special Features : Only requires an access gap of 1/4 (6 mm) Robust Light weight Tool-Just 7.2 kg(16 lbs) 10,000 psi (700 Bar) generates 14.0 Tons spreading force Automatic Spring Return Locking at first step ensures no slippage increased safety. Shutdowns / Outages Testing Valve Change-outs Operating Benefits : Time / Cost Savings Lowest Weight / Lifting Force Ratio. Precise Easy to set up and use. Safe Minimal Maintenance Fast for labour & time savings Use multiple units for greater lifting Kit Options : Mini Kit 1 x Hydraulic Spreading Wedge Assembly 1 x Safety Block 1 x Instruction Manual 1 x Carry Case Gross Weight: 8 kg Stepped Block Accessory 2 x Stepped Blocks 2 x CSK M6 x 12mm Countersunk Screws 1 x M4 Allen Key Sold as a separate item in pairs Standard Kit 1 x Hydraulic Spreading Wedge Assembly 1 x 10,000 psi (700 Bar) Two Stage Hydraulic Hand Pump 1 x 10,000 psi (700 Bar) Hydraulic Hoses 1 x Safety Block 1 x Instruction Manual 1 x Carry Case Gross Weight: 17 kg Maxi Kit 2 x Hydraulic Spreading Wedge Assembly 1 x 10,000 psi (700 Bar)- Two Stage Hydraulic Hand Pump 2 x 10,000 psi (700 Bar) Hydraulic Hoses 2 x Safety Block 1 x Instruction Manual 1 x Carry Case 1 x 10,000 psi Twin Valve manifold Gross Weight: 28 kg 27

27 BOLT TENSIONERS Bolt tensioning is now the preferred method of tightening bolts & stud on all critical applications. PST range of bolt tensioners provides optimum solutions to bolt tensioning requirements. PST Series, Bolt Tensioners are designed for operation in a wide variety of applications including pipeline flanges, heat exchangers, pressure vessels, compressor covers, boilers feed pumps, anchors bolts and many others. Sub Parts : PST Bolt Tensioner is very simple to use consisting of fours i.e. Puller, Load Cell, Bridge & Nut Driver. PULLER LOAD CELL BRIDGE NUT DRIVER Standard Features : Versatile Design : PST Series standard variable tensioners are designed to provide a wide range of flexibility, covering stud sizes 3/4 to 5.3/4. Different stud sizes are accommodated by simply changing adaptor kit consisting of Puller, Bridge & Nut Driver, while utilizing the same Load cell. High Strength Alloy Steel : The PST Series tensioners operate at a maximum pressure of 1500 Bar & utilizes high strength AISI 4340 steel parts for long lasting performance. Stroke Indicator : The PST Series tensioner has an exception stroke of 15 mm. Integral stroke indicator allows piston stroke to be viewed & measured indication of stroke is provisioned with over stroke limit indication. Safe Design : The PST series tensioners are designed so that in event of over-stroke the high pressure fluid will be released from inner side of the load cell & thus saving the operator from exposure. Multi Tensioning : The PST Series load cell is provisioned with two connections & this acts as manifold for multi tensioning applications. By using high pressure link hoses any number of bolt tensioners can be connected & tightened simultaneously. This ensures equal tightening of all bolts in the assy. & reduce the work time. Anti Roll Seals : Low frictions, anti roll seals & rigid backup rings incorporated for improved life & reliability. Floating Piston : The unique piston design allows 2º tilt without any loss of load, preventing piston seizure or damage of piston bore. 28 Optional Features : Auto Retraction :- For additional ease of use the PST series tensioner can be supplied with auto spring retraction system. Special Fitting :- Optional fitting like bi-hex nut driver. Special bridges, puller etc can be supplied to customer requirement. Customized Solutions :- We can supply not only customized fittings but complete tool customized to customer requirement.

28 BOLT TENSIONERS SPECIFICATIONS B PITCH A C Technical Details: Model No. Bolt Size Max Load Hyd Area O.D. Clearance B 2 Cell Adaptor inch mm Ton kn in mm mm mm mm mm PST-01 A / A1-M A / A1-M A PST-02 A2-M A / A2-M A / A2-M A / A2-M PST-03 A / A3-M A / A3-M A / A3-M PST-04 A / A4-M A / A4-M A / A4-M A / A4-M PST-05 A / A5-M A / A5-M A / A5-M A A5-M PST-06 A / A6-M A A6-M A6-M A / A6-M Min Pitch Relief C Height A 29

29 BOLT TENSIONERS SPECIFICATIONS Model No. Bolt Size Max Load Hyd Area O.D. Clearance B 2 Cell Adaptor inch mm Ton kn in mm mm mm mm mm PST-07 A7-M A / A7-M A / A7-M A7-M A / A7-M PST-08 A8-M A / A8-M A8-M A PST-09 A / A9-M A9-M A A9-M A9-M A / PST-10 A10-M A / A10-M A / A10-M A10-M A / A10-M A PST-11 A / A11-M A A / A11-M A / A11-M A / A11-M PST-12 A12-M A A12-M A / A / A12-M A12-5.3/4 5.3/ A12-M Min Pitch Relief C Height A 30 Bolt Load = Bolt Stress x Area of Stud. = (Bolt Stretch x Modulus of Elasticity x Area of Stud) Effective Length. Hydraulic Pressure = (Bolt Load x Relaxation Factor) Load Cell Area.

30 SUB SEA VARIABLE BOLT TENSIONERS Sub Sea Bolt Tensioners are made in variable construction with divided puller technology for ease of operation. All Bolt Tensioners have 30mm maximum piston stroke & stroke indicator. Compact tool design allows easier access into restricted application and low head clearances. It s Floating piston design allows tilt in any direction without loss of load, thus eliminating piston seizure and aiding tool retraction. Integral manifold design simplifies hose connection eliminating complicated tee-block arrangements. Although rated capacity is of 100 Mpa for most of typical application requirement will be below 60 Mpa. A D B C PSS Series Technical Details : Load Cell No. Bolt Size Adaptor Kit No. Tool Hyd. Area Max load psi A B C D 2 (mm ) inch mm mm mm mm PSS /4 P M20 P1 - M20 7/8 P PSS - 02 M24 P2 - M P M27 P2 - M27 1.1/8 P M30 P2 - M30 PSS /4 P M33 P3 - M33 1.3/8 P M36 P3 - M36 PSS /2 P M39 P4 - M39 1.5/8 P M42 P4 - M42 PSS /4 P M45 P6 - M45 1.7/8 P M48 P6 - M48 2 P M52 P6 - M52 PSS - 08 M56 P8 - M /4 P M60 P8 - M60 2.1/2 P M64 P8 - M64 PSS - 10 M68 P10 - M /4 P M72 P10 - M72 M76 P10 - M76 3 P PSS - 11 M80 P11 - M /4 P M85 P11 - M85 3.1/2 P M90 P11 - M90 31

31 BOLT TENSIONER PUMPS & ACCESSORIES PU-AH-1500 PU-HP-1500 A choice of manual or air driven hydraulic pump units both compatible for use with standard PST stud bolt tensioners is available. Both models are easy to operate and are supplied complete with a calibrated pressure gauge and quick release outlet coupling. The air driven PUAH1500 model also incorporates an integral inlet air filter regulator & lubricator. Model No. Description Usable Oil Capacity Outlet Coupler Length Dimensions Height Net Weight mm mm (Liters) mm Kg. PU-AH bar (21750 psi) Air/Hydraulic Pump 0.7 HNCP PU-HP bar Hand Pump c/w 200 bar gauge 2.0 HNCP HNCP002 HNCP011 PU-HG500 Ultra-high pressure hoses are compatible for use with all bolt tensioning products up to a maximum of 1500 bar working pressure. Each hose is supplied complete with quick connect coupling and has a safety factor of 3:1 on maximum working pressure. Four standard length are available with special lengths available on request. Spare coupling, nipples and washers are also available. Part No. Description Weight Part No. Description Weight 32 Hose psi (c/w female couplers each end) PU-HG meter Hose 1.1 PU-HG300 3 meter Hose 2.5 PU-HG500 5 meter Hose 4.5 HNCP001 Std Male Snap Coupler 0.05 HNCP002 Std Female Snap Coupler 0.2 HNCP011 Nipple Extension Adaptor 0.05

32 SPRING BALANCERS We have introduced several safety features into the new designed Spring Balancer which has made it user friendly & eliminating chances of Industrial accident. Large batch production has been introduced through new Pressure Dies which has made the product look better and has reduced the Delivery Time. Product is in use in over 85 countries with the largest automobile manufactures. Features in Spring Balancer CLOSED BODY & COVER : Prevents industrial accident by preventing ingress of fingers inside the assembly. BODY LINER : To prevent the wear of body by wire rope. Increases life of the balancer. VERTICAL AXIS SPRING ADJUSTMENT : This will facilitate adjustment of spring tension from ground level. CONTAINERISED SPRING ASSEMBLY : Concealed containers are easy in handling during maintenance and replacement of springs. WIRE ROPE REPLACEMENT WITHOUT DISMANTLING : A slot on balancer facilitates removal & installation of wire rope without disassembly of balancer. This facility is not available for long range balancer. PRESSURE DIE CASTING : Parts are manufactured through pressure die hence there is consistency in surface finish & total interchangeability of spares. Facilitates large batch production hence reduced delivery period. SAFETY LOCK PIN : Locks drum pulley in the event of spring failure and thus prevents the fall of costly equipment & injury to the operator from falling load. FORGED TOP HOOK : Permits 360 degree swivel of balancer. SWA Series These balancers are provisioned with WIRE ARREST MECHANISM, which locks the drum pulley in case of Bottom Hook failure or accidental tool disengagement. Capacity kg Model No. Travel meter Weight kg Capacity kg Weight kg SWA SWA - 15 L SWA SWA - 22 L SWA SWA - 30 L SWA SWA - 40 L SWA SWA - 50 L SWA SWA - 60 L SWA SWA - 70 L Model No. Travel meter 33

33 SPRING BALANCERS SWF Series SWF series balancers are now fully enclosed & are provisioned with a body liner to prevent damage to body. Capacity Model Travel Weight Capacity Model Travel Weight kg No. meter kg kg No. meter kg SWF SWF SWF SWF - 03 L SWF SWF - 05 L SWF SWF - 09 L SWF SWF - 15 L SWF SWF - 22 L SWF SWF - 30 L SWF SWF - 40 L SWF SWF - 50 L SWF SWF - 60 L SWF SWF - 70 L SWF SWF - 85 L SWF SWF L SWF SWF L SWF SWF L SWF SWF SBH Series New introduction to meet the long standing requirement of HEAVY WEIGHT balancers both in Standard range & Long range. 34 Capacity kg Model No. Travel meter Weight kg SBH SBH SBH SBH SBH SBH SBH SBH

34 HEAVY DUTY INDUSTRIAL IMPACT WRENCHES Mechanisms Pin Clutch - (DYNA PACT CLUTCH) Two Pin Clutch hammers strike the anvil, provides high torque, low vibration and fast run downs. This mechanism delivers higher performance and extended durability. Pin Hammer Good connection of Pin & Hammer produces excellent stability and durability. It generates in creditable high torque and low vibration. Thin Hammer Unique Mechanism for continuos torque increase with two solid ring hammers. It delivers an instantaneous, balanced blow. More powerful than any other mechanism on the market. Features / Benefits : Heavy Duty for toughest applications. Highest torque output to weight ratio in industry. Available Twin Hammer or Pin Clutch Mechanisms for maximum versatility. Minimum Noise and Vibration. Available in 3/4, 1 and 1.1/2 square drives. Uses standard air supply. TIW - 27 TIW - 48 TIW - 76 Model No. TIW - 27 TIW - 48 TIW - 76 Bolt Capacity 27 mm (1.1/8 ) 48 mm (1.7/8 ) 76 mm (3 ) Square Drive Size 3/ /2 Max. Torque 1018 Nm (750 ft.lb) 2712 Nm (2000 ft.lb) 4068 Nm (3000 ft.lb) Air Inlet 1/4 3/8 1/2 Hose Size (mm) Sound Level (dba) Vibration (m/s ) 3/ Air Pressure Needed 90 psi (6 bar) 90 psi (6 bar) 90 psi (6 bar) Net Weight (kg)