Dura-Glide SLH Slim Line Header Applications Guide

Transcription

1 Dura-Glide SLH Slim Line Header Applications Guide Prohibition on Copying Any unauthorized reproductions, disclosure or distribution of copies by any person of any portion of this work may be a violation of copyright law of the United States of America and other countries, could result in the awarding of statutory damages of up to $250,000 (17 USC 504) for infringement, and may result in further civil and criminal penalties. All rights reserved.

2 Table of Contents 1. How to Determine Dura-Glide SLH All Glass Package Size...page 1 2. How to Determine Dura-Glide SLH Utility Hanger Package Size...page 2 3. How to Determine Dura-Glide SLH Header Mounting Height...page 3 4. How to Determine Dura-Glide SLH Door Handing...page 4 5. How to Order Dura-Glide SLH Solenoid Lock...page 5 6. How to Install P/N Bottom Guide Assembly for Dura-Glide SLH Utility Hanger...page 6 7. How to Cut Dura-Glide SLH Header and Cover with Utility Option...page 7 8. How to Re-Install End Cap, Bumper Stop (if necessary), and Idler Pulley...page 8 9. How to Cut and Re-Install Dura-Glide SLH Belt(s)...page How to Re-Wire if Step Down 220V is Not Required...page 10 Contact information: Vito Spinelli, Director of International Business Development: Vito.Spinelli@sbdinc.com +1 (860) MarySue Guite, International Business Account Manager: MarySue.Guite@sbdinc.com +1 (860) This applications guide is intended for use only by authorized Stanley international distributors. It is intended as a guide only and does not replace Stanley part number Dura-Glide SLH Installation Instructions. Please refer to installation instructions for all applicable information.

3 1. HOW TO DETERMINE DURA-GLIDE SLH ALL GLASS PACKAGE SIZE 1. Measure Clear Door Opening Width and Height 2. Follow Formula to Determine Package and Panel Size NOTE: CUTTING OF ALL GLASS IS NOT RECOMMENDED AS SHOE IS SIZED TO LENGTH BI-PART FORMULAS PACKAGE HEIGHT = CLEAR DOOR OPENING HEIGHT mm (RECOMMENDED) CLEAR DOOR OPENING WIDTH = 1954 mm (MAXIMUM) GLASS HEIGHT = PACKAGE HEIGHT mm* * includes 10 mm of clearance under panel ALL GLASS RAIL BI-PART, VIEWED FROM INTERIOR ALL GLASS BI-PART SIZES PACKAGE WIDTH = 4300 mm STANDARD PACKAGE HEIGHT = CONTINGENT UPON TOTAL WEIGHT NOT EXCEEDING 150 kg GLASS WIDTH = 1064 mm STANDARD PACKAGE WIDTH CLEAR DOOR OPENING WIDTH PACKAGE HEIGHT CLEAR DOOR OPENING HEIGHT SINGLE SLIDE FORMULAS PACKAGE HEIGHT = CLEAR DOOR OPENING HEIGHT mm CLEAR DOOR OPENING WIDTH = 1452 mm (MAXIMUM) GLASS HEIGHT = PACKAGE HEIGHT mm* * includes 10 mm of clearance under panel ALL GLASS SINGLE SLIDE SIZES PACKAGE WIDTH = 3100 mm STANDARD PACKAGE HEIGHT = CONTINGENT UPON TOTAL WEIGHT NOT EXCEEDING 150 kg GLASS WIDTH = 1539 mm STANDARD SINGLE SLIDE, VIEWED FROM INTERIOR PACKAGE WIDTH ALL GLASS RAIL CLEAR DOOR OPENING WIDTH PACKAGE HEIGHT CLEAR DOOR OPENING HEIGHT DURA-GLIDE SLH APPLICATIONS 10/2012 PAGE 1 of 10

4 2. HOW TO DETERMINE DURA-GLIDE SLH UTILITY HANGER PACKAGE SIZE BI-PART FORMULAS PACKAGE WIDTH = 2 x CLEAR DOOR OPENING WIDTH mm PACKAGE HEIGHT = CLEAR DOOR OPENING HEIGHT mm CLEAR DOOR OPENING WIDTH = 1/2 PACKAGE WIDTH -196 mm WIDTH = 1/4 PACKAGE WIDTH mm HEIGHT = PACKAGE HEIGHT mm* * includes 10 mm of clearance under panel 1. Measure Clear Door Opening Width and Height 2. Follow Formula to Determine Package and Panel Size BI-PART, VIEWED FROM INTERIOR UTILITY HANGER BI-PART MINIMUM/MAXIMUM SIZES PACKAGE WIDTH WITH OPTIONS= 2438 mm MINIMUM TO 4300 mm MAXIMUM OPTIONS INCLUDE: SOLENOID LOCKING AND UPS PACKAGE WIDTH WITHOUT OPTIONS = 2438 MINIMUM TO 4300 mm MAXIMUM PACKAGE HEIGHT = CONTINGENT UPON TOTAL WEIGHT NOT EXCEEDING 150 kg PACKAGE WIDTH CLEAR DOOR OPENING WIDTH PACKAGE HEIGHT CLEAR DOOR OPENING HEIGHT SINGLE SLIDE FORMULAS PACKAGE WIDTH = 2 x CLEAR DOOR OPENING WIDTH mm PACKAGE HEIGHT = CLEAR DOOR OPENING HEIGHT mm CLEAR DOOR OPENING WIDTH = 1/2 PACKAGE WIDTH - 98 mm WIDTH = 1/2 PACKAGE WIDTH mm HEIGHT = PACKAGE HEIGHT mm* * includes 10 mm of clearance under panel SINGLE SLIDE, VIEWED FROM INTERIOR UTILITY HANGER SINGLE SLIDE MINIMUM/MAXIMUM SIZES PACKAGE WIDTH WITH OPTIONS= 2438 mm MINIMUM TO 3100 mm MAXIMUM OPTIONS INCLUDE: SOLENOID LOCKING AND UPS PACKAGE WIDTH WITHOUT OPTIONS = 1981 mm MINIMUM TO 3100 mm MAXIMUM PACKAGE HEIGHT = CONTINGENT UPON TOTAL WEIGHT NOT EXCEEDING 150 kg PACKAGE WIDTH CLEAR DOOR OPENING WIDTH PACKAGE HEIGHT CLEAR DOOR OPENING HEIGHT DURA-GLIDE SLH APPLICATIONS 10/2012 PAGE 2 of 10

5 3. HOW TO DETERMINE DURA-GLIDE SLH MOUNTING HEIGHT 1. Measure Clear Door Opening Height 2. Suggest Bottom of Header Even with Top of Clear Door Opening Height 3. Add 116 mm to Determine Top of Header and Total Package Height VERTICAL SECTION, ALL GLASS SHOWN 116 mm 175 mm PACKAGE HEIGHT CLEAR DOOR OPENING HEIGHT ACCESS COVER INTERIOR EXTERIOR ALL GLASS PACKAGE SIZE SINGLE SLIDE GLASS WIDTH = 1539 mm STANDARD BI-PART GLASS WIDTH = 1064 mm STANDARD GLASS HEIGHT = PACKAGE HEIGHT mm* * includes 10 mm of clearance under panel VERTICAL SECTION, UTILITY HANGER OPTION SHOWN 116 mm 175 mm PACKAGE HEIGHT CLEAR DOOR OPENING HEIGHT ACCESS COVER INTERIOR EXTERIOR UTILITY HANGER PACKAGE SIZE SINGLE SLIDE WIDTH = 1/2 PACKAGE WIDTH mm BI-PART DOOR WIDTH = 1/4 PACKAGE WIDTH +1.6 mm DOOR HEIGHT = PACKAGE HEIGHT mm* *includes 10 mm of clearance under panel DURA-GLIDE SLH APPLICATIONS 10/2012 PAGE 3 of 10

6 4. HOW TO DETERMINE DURA-GLIDE SLH DOOR HANDING VIEWED FROM INTERIOR * Sensor mounted on RIGHT side, door slides to the LEFT to open, Door is RIGHT HAND * Sensor mounted on LEFT side, door slides to the RIGHT to open, Door is LEFT HAND RIGHT HAND LEFT HAND VIEWED FROM EXTERIOR * Sensor mounted on LEFT side, door slides to the RIGHT to open, Door is RIGHT HAND (BEHIND) * Sensor mounted on RIGHT side, door slides to the LEFT to open, Door is LEFT HAND (BEHIND) RIGHT HAND LEFT HAND DURA-GLIDE SLH APPLICATIONS 10/2012 PAGE 4 of 10

7 5. HOW TO ORDER DURA-GLIDE SLH SOLENOID LOCK SOLENOID LOCK, FAIL SAFE SOLENOID LOCK, FAIL SAFE - WHEN POWER IS OUT, DOOR WILL STILL OPEN AND BREAKOUT SOLENOID LOCK, FAIL SECURE SOLENOID LOCK, FAIL SECURE - WHEN POWER IS OUT, DOOR WILL NEITHER OPEN NOR BREAKOUT DOOR HANDING AND TYPE RIGHT HAND, SINGLE SLIDE LEFT HAND, SINGLE SLIDE BI-PART SOLENOID ORDER SOLENOID LOCK LOCK TYPE ASSEMBLY PART NUMBER PART DESCRIPTION FAIL SAFE Solenoid Lock Assembly, Fail Safe FAIL SECURE Solenoid Lock Assembly, Fail Secure FAIL SAFE Solenoid Lock Assembly, Fail Safe FAIL SECURE Solenoid Lock Assembly, Fail Secure FAIL SAFE Solenoid Lock Assembly, Fail Safe FAIL SECURE Solenoid Lock Assembly, Fail Secure DURA-GLIDE SLH APPLICATIONS 10/2012 PAGE 5 of 10

8 6. HOW TO INSTALL P/N ASSEMBLY FOR DURA-GLIDE SLH UTILITY HANGER 1. Ensure Sliding Panels are Plumb 2. Refer to Details A or B: Determine Proper Location and Orientation 3. Using Holes in Guide Plate, Mark Location Onto Floor 4. Attach Guide to Floor Using Appropriate 6 mm Fasteners for a Countersunk Hole DETAIL A DUAL MOUNTED OUTSIDE OF (S) HORIZONTAL VIEW VERTICAL VIEW #2 ENSURE FLAT SIDE FACES #1 PLATE #2 PLATE #1 MARK LOCATION AND FASTEN TO FLOOR INTERIOR BY #1 PLATES #2 EXTERIOR DETAIL B DUAL CONCEALED IN (S) HORIZONTAL VIEW VERTICAL VIEW #2 #1 PLATE #2 PLATE #1 #2 INTERIOR BY PLATES #1 EXTERIOR DURA-GLIDE SLH APPLICATIONS 10/2012 PAGE 6 of 10

9 7. HOW TO CUT DURA-GLIDE SLH AND COVER WITH UTILITY OPTION 1. Determine Proper Orientation of Header CUT THE RIGHT SIDE OF THE 2. Refer to Detail A: Remove End Cap, Bumper Stop (if necessary), Idler Pulley, and Belt 3. Refer to Details A & B: Measure, Cut Header and Cover to Preferred Length 4. Refer to Details C & D: Drill for Bumper Stop Attachment (if necessary) Using Dimensions Shown 5. Refer to Section How to Re-Install Right End Cap, Bumper Stop (if necessary), and Idler Pulley DETAIL A GENERAL ARRANGEMENT, FRONT VIEW OF IDLER PULLEY LEFT BELT BUMPER STOP RIGHT INSIDE OF, FRONT VIEW ACCESS COVER NOT SHOWN DETAIL B CUT AND COVER TO PREFERRED LENGTH TOP OF CUT RIGHT SIDE OF DETAIL C ORIENTATION VERTICAL VIEW, ACCESS COVER NOT SHOWN TOP OF VIEW OF DETAIL B LEFT LOAD WHEEL TRACK RIGHT VIEW OF DETAIL D OF LOAD WHEEL TRACK INSIDE OF, ACCESS COVER NOT SHOW DETAIL D DRILL BUMPER STOP MOUNTING HOLES (IF NECESSARY) DETAIL E MARK AND DRILL HOLES FOR BUMPERS STOPS AS SHOWN 2X 7 mm DIAMETER LEFT OF LOAD WHEEL TRACK SEE DETAIL E RIGHT 25 mm 43 mm 29 mm DURA-GLIDE SLH APPLICATIONS 10/2012 PAGE 7 of 10

10 8. HOW TO RE-INSTALL END CAP, BUMPER STOP (IF NECESSARY), AND IDLER PULLEY 1. Refer to Details A & B: Re-Install Idler Pulley Using Dimensions Shown 2. Refer to Detail B: Install Bumper Stop (if necessary) 3. Reattach Right End Cap 4. Refer to Section How to Cut and Re-Install Dura-Glide SLH Belt(s) SEE HOW TO CUT DURA-GLIDE SLH AND COVER WITH UTILITY OPTION FOR ADDITIONAL INFORMATION DETAIL A GENERAL ARRANGEMENT, FRONT VIEW OF 114 mm LEFT SEE DETAIL B RIGHT DETAIL B DETAIL IDLER PULLEY, BUMPER STOP, AND BELT MOUNT IDLER PULLEY 114 mm IN FROM RIGHT EDGE 114 mm RE-ATTACH END CAP USING 3X SELF-TAPPING SCREWS MOUNTING HOLE BELT BUMPER STOP COVER SCREW DURA-GLIDE SLH APPLICATIONS 10/2012 PAGE 8 of 10

11 9. HOW TO CUT AND RE-INSTALL DURA-GLIDE SLH BELT(S) 1. Determine Length of Header Removed and Follow Formula, Below BI-PART FORMULA (REPEAT FOR EACH BELT) SHORTENED BELT LENGTH = ORIGINAL BELT LENGTH -1 x LENGTH REMOVED SINGLE SLIDE FORMULA SHORTENED BELT LENGTH = ORIGINAL BELT LENGTH - 2 x LENGTH REMOVED 2. Cut Belt(s) to Length 3. Refer to Details A & B: Re-Attach Using Belt Brackets as Shown DETAIL A GENERAL ARRANGEMENT, FRONT VIEW OF LEFT SEE DETAIL B RIGHT DETAIL B LONG AND SHORT BELT BRACKETS, AND BELT(S) BELT BELT BRACKET, SHORT BELT BRACKET, LONG BELT DURA-GLIDE SLH APPLICATIONS 10/2012 PAGE 9 of 10

12 10. HOW TO RE-WIRE IF STEP DOWN 220V IS NOT REQUIRED 1. Refer To Detail A: Remove 220V Step Down Power Supply 2. Refer To Detail B: Connect Incoming 110V Supply to Harness P/N (with UPS) or P/N (no UPS) Using Wire Nuts or Equivalent 3. Ensure Header is Grounded to External Ground Connection DETAIL A DETAIL B BK WH LINE NEUTRAL 110 VAC LINE GROUND HARNESS OR GROUND SCREW IN DURA-GLIDE SLH APPLICATIONS 10/2012 PAGE 10 of 10