LARGE BEACON STEM MOUNT (LBS)

Transcription

1 LARGE BEACON STEM MOUNT (LBS) CATALOG NUMBER: SOURCE: LBS LED BW Power of 'X' Technology with Chip on Board Construction CATALOG NUMBER LOGIC LBS LED BW Example - LBS SD27 - LED - X43 - BW - BLP - A HSR Material Blank - Aluminum (Must specify Aluminum Rings.) C - Copper (Must specify Brass or Stainless Steel Rings.) Series LBS - Large Beacon Stem Mount Stem Length (Specify Inches) - 6", 12", 18", 24", 30", 36", 42", 48", 54", 60" Style SD27-27 Inch Shade SD35-35 Inch Shade Source LED - Power of 'X' Technology with Chip on Board Construction LED Type X43-34WLED/2.7K X44-34WLED/3K X46-42WLED/2.7K X47-42WLED/3K X49-57WLED/2.7K X50-57WLED/3K X45-34WLED/4K X48-42WLED/4K X51-57WLED/4K Optic BW - Batwing Rings NAT - Natural* Powder Coat Standard Powder Coat Premium BP - Brown Patina* Powder Coat Color Satin Wrinkle ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite GP - Green Patina* Bronze BZP BZW AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone NIC - Nickel Plate* Black BLP BLW AQW Antique White CRM Cream SMG Sierra Mountain Granite BZW - Bronze Wrinkle White (Gloss) WHP WHW BCM Black Chrome HUG Hunter Green TXF Textured Forest See Powder Coat Chart to the right for additional choices. *Not available with Aluminum. For Aluminum fixtures, specify Standard or Premium Powder Coat. Aluminum SAP BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper Verde VER BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron Also available in RAL es CAP Clear Anodized Powder OCP Old Copper See submittal SUB A - Aluminum B - Brass S - Stainless Steel ( to match Fixture.) ( to match Fixture.) (Stainless Steel Rings are provided in Natural (NAT) regardless of.) Accessories (Select one.) DT - Dark Top (Eliminates glow in upper window. Material and to match fixture.) MSH - Mesh Screen (Material and to match Fixture.) Options CLR - Clear Coat Protection For use with Natural (NAT) only. For use with Copper Fixture only. Mounting HSR - Hang Straight Round (Material and to match Fixture.) HSQ - Hang Straight Square (Material and to match Fixture.) NOTES: SUB THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

2 LARGE BEACON STEM MOUNT (LBS) SIDE VIEW Variable Stem Length 27 1/8" Dia. (689mm) 5 5/8" Dia. (143mm) (SD27 Style shown with Hang Straight Round Canopy) 6 3/8" (162mm) 10 7/8" (277mm) 1 1/2" (39mm) 3 15/16" (100mm) 8 3/8" Dia. (213mm) Variable Stem Length 35 1/8" Dia. (893mm) 5 5/8" (143mm) (SD35 Style shown with Hang Straight Square Canopy) 6 3/8" (162mm) 13" (331mm) 1 1/2" (39mm) 1 13/16" (47mm) 8 3/8" Dia. (213mm) All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult for program requirements. Materials Copper and Brass: Constructed from copper and brass. These enduring metals are inherently corrosion resistant. Aluminum: Constructed from Copper-Free aluminum (Type 6061-T6) Shade Hand spun from 16GA 3003-H14 aluminum or 16GA C101 copper Specify 27" or 35" diameter. Body 360 Aluminum Cast or C836 Red Brass cast. High temperature, silicone gasket provides water tight seal to shade assembly. Lens 6" dia. frosted acrylic lens with frosted acrylic downlight lens provides sealed optical compartment. Stem Fully Machined 7/8"OD X 1/8" Wall ASTM 6061-T6 Aluminum Tube or 7/8"OD X 1/8" Wall ASTM C360 Brass. Available in configurable lengths 6" Minimum and 60" maximum overall. Rings 6061-T6 Aluminum Ring, 360 Brass Ring or 304 Stainless Steel Ring (Specify Separately). Hang Straight Canopy 4" Round Hang Straight mounting plate with 20 swivel angel. Canopy conceals mounting plate avaliable in 5-5/8" Round or 5-5/8"x5-5/8" Square. Made from Hand Spun 16GA-3003-H14 Aluminum or 16GA-C101 Copper. Mesh Screen Diffuses light in window. Material and to match fixture. Dark Top Eliminates glow in window above shade. Material and to match fixture. Installation 4" diameter, machined aluminum mounting plate with black finish. For use with 4" octagonal junction box. BKSSL Integrated solid state system with X technology is scalable for field upgrade. Modular design with electrical quick disconnects permit field maintenance. Minimum 50,000 hour rated life at 70% of initial lumens (L70). BKSSL technology provides long life, significant energy reduction and exceptional thermal management. Color Management Chip on board technology delivers natural white light. Exact color point conformity exceeds ANSI C standard. Module exceeds 80 CRI (RA>80, R9.16). Color point uniformity 2 SDCM color control for 2700K-4000K CCT. Remote Driver For use with remote LED Driver. See remote driver submittal(s) to determine remote distance, dimming range, and wiring requirements prior to detailing field installation of any remote wiring. Wiring Tefzel coated wire, 18AWG, 600V, 150 C rated and certified to UL 1569 standard. Copper and Brass: Natural (NAT): Copper and brass components are sand blasted to expose the porous metal surface. Over time, and with exposure to the elements, the metals will naturally weather resulting in a unique patina. Also available with hand-crafted metal finishes including brown patina (BP), green patina (GP), polish (POL), and nickel plate (NIC). Copper and brass components are also available in powder coat finishes. Optional ceramic clear coat protection (copper and brass components only) seals and protects underlying metals and protects against discoloration, fading, and wear. Highly impervious to chemicals, solvents, and graffiti. For use with natural (NAT) and polish (POL) finishes. Aluminum: StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings UL tested to IESNA LM-79. UL Listed. Certified to CAN/CSA/ ANSI Standards. RoHs compliant. Suitable for indoor or outdoor use. Suitable for use in wet locations. Additionally suitable for installation within 4 of the ground. IP65 Rated. Made in USA. Energy Star is a registered trademark of the United States Environmental Protection Agency. Tefzel is trademark of The Chemours Company FC, LLC. SUB

3 LAMP DATA x43, x44, x45, x46, x47, x48, x49, x50, x51 BK No. CCT (Typ.) LM79 DATA L70 DATA OPTICAL DATA CRI (Typ.) Input Watts (Typ.) Minimum Rated Life (hrs.) 70% of initial lumens (L 70 ) Optic Delivered Lumens x K 80 34W 50,000 BW 3084 x K 80 34W 50,000 BW 3197 x K 80 34W 50,000 BW 3354 x K 80 42W 50,000 BW 3348 x K 80 42W 50,000 BW 3533 x K 80 42W 50,000 BW 3588 x K 80 57W 50,000 BW 3849 x K 80 57W 50,000 BW 4318 x K 80 57W 50,000 BW 4385 B-K LIGHTING info@bklighting.com SUB

4 NEMA 3R Remote Driver Housing CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC RM Example RM - D34 - SAP - MT Remote Driver Housing RM - NEMA 3R Remote Driver Housing Driver Type For use with 0-10 Dimmer: (Specify Fixture Separately) D34-34W Dimming Driver (Standard Dimming 1-100%) D42-42W Dimming Driver (Standard Dimming 1-100%) D57-57W Dimming Driver (Standard Dimming %) D34ARC - 34W Dimming Driver (Architectural Dimming %) D42ARC - 42W Dimming Driver (Architectural Dimming %) MT REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Failure to comply with specific wiring requirements will void product warranty. Standard Premium Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP Verde VER Input Voltage MT VAC Input ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper Also available in RAL es See submittal SUB DRIVER ELECTRICAL DATA TYPE AC INPUT FREQUENCY HZ DIMMING POWER FACTOR AT FULL LOAD THD OPERATING AMBIENT TEMPERATURE DIMMER TYPE DIMMER IN RUSH CURRENT D34 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C (-4 F to 122 F) 0-10V 1-100% <30mA D42 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C (-4 F to 122 F) 0-10V 1-100% <30mA D57 120/208/240/277 50/60 YES >0.9 20% -30 C ~ 60 C (-4 F to 122 F) 0-10V % <30A D34ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C (-4 F to 122 F) 0-10V % <30mA D42ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C (-4 F to 122 F) 0-10V % <30mA SUB THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

5 NEMA 3R Remote Driver Housing SIDE VIEW BACK VIEW 4 3/8" (111mm) 6 1/4" (159mm) 8 1/8" (206mm) 5 1/2" (140mm) 3 3/4" (95mm) END VIEW 3 3/8" (86mm) SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult greensource for program requirements. Installation Nema 3R, surface mount design. For use with remote fixture (specified separately). Housing Steel construction with screw cover. Front access for ease of installation and inspection. [2] bottom entry, 3/4 conduit knockouts. Wiring / Connectors Teflon coated wire, 18 gauge, 600V, 250 C rated and certified to UL1659 standard. Pre-wired and labeled terminal strip. Driver (34-57W) [1] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current driver VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <10.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 3R Enclosure. UL Listed. Certified to CAN/CSA/ ANSI Standards. RoHs compliant. Made in USA. Teflon is a registered trademark of DuPont Corporation. SUB

6 NEMA 3R Dual Remote Driver Housing CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC DRM MT Example DRM - D34 - SAP - MT Remote Driver Housing DRM - NEMA 3R Remote Driver Housing Driver Type (Specify Fixture Separately) For use with 0-10 Dimmer: D34 - (2) 34W Dimming Driver (Standard Dimming 1-100%) D42 - (2) 42W Dimming Driver (Standard Dimming 1-100%) D57 - (2) 57W Dimming Driver (Standard Dimming %) D34ARC - (2) 34W Dimming Driver (Architectural Dimming %) D42ARC - (2) 42W Dimming Driver (Architectural Dimming %) REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Failure to comply with specific wiring requirements will void product warranty. Standard Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP Verde VER Input Voltage MT VAC Input Premium ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper Also available in RAL es See submittal SUB DRIVER ELECTRICAL DATA TYPE AC INPUT FREQUENCY HZ DIMMING POWER FACTOR AT FULL LOAD THD OPERATING AMBIENT TEMPERATURE DIMMER TYPE DIMMER IN RUSH CURRENT D34 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C (-4 F to 122 F) 0-10V 1-100% <30mA D42 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C (-4 F to 122 F) 0-10V 1-100% <30mA D57 120/208/240/277 50/60 YES >0.9 20% -30 C ~ 60 C (-4 F to 122 F) 0-10V % <30A D34ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C (-4 F to 122 F) 0-10V % <30mA D42ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C (-4 F to 122 F) 0-10V % <30mA SUB THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

7 NEMA 3R Dual Remote Driver Housing FRONT VIEW SIDE VIEW BACK VIEW 8 1/4" (210mm) 4 3/8" (111mm) 5 3/4" O.C. (146mm) 12 1/8" (308mm) 7 1/2" O.C. (191mm) 9 7/16" O.C. (240mm) 3 7/8" O.C. (98mm) END VIEW 3 1/4"O.C. (83mm) 2X 1/2" Conduit 3 1/4"O.C. (83mm) 2X 3/4" Conduit SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult greensource for program requirements. Installation Nema 3R, surface mount design. For use with remote fixtures (specified separately). Housing Steel construction with screw cover. Front access for ease of installation and inspection. [2] bottom entry, 3/4 conduit knockouts. Wiring / Connectors Teflon coated wire, 18 gauge, 600V, 250 C rated and certified to UL1659 standard. Pre-wired and labeled terminal strip. Driver (34-57W) [2] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current drivers VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 3R Enclosure. UL Listed. Certified to CAN/CSA/ ANSI Standards. RoHs compliant. Made in USA. Teflon is a registered trademark of DuPont Corporation. SUB

8 PM3RM TREE STRAP CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC Example PM3RM - TS-20 - D34ARC - BZP - MT - SC - MB Series PM3RM PM3RM - Universal Power Module 3 Remote Mounting TS - Length - Tree Strap (Specify Adjustable Strap Length) Minimum 3 Adjustable Strap (Standard) Driver Type (Driver Wattage must match Fixture Wattage) For use with 0-10 Dimmer: D34-34W Dimming Driver (Standard Dimming 1-100%) D42-42W Dimming Driver (Standard Dimming 1-100%) D57-57W Dimming Driver (Standard Dimming %) D34ARC - 34W Dimming Driver (Architectural Dimming %) D42ARC - 42W Dimming Driver (Architectural Dimming %) Standard MT Premium REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Failure to comply with specific wiring requirements will void product warranty. Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper Input Voltage Options Verde VER MT VAC Input BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper SC - Safety Cable. For use with Tree Strap (TS) mount. Cable length to match strap length. MB - Mounting Brackets Also available in RAL es See submittal SUB DRIVER ELECTRICAL DATA TYPE AC INPUT Frequency Hz DIMMING POWER FACTOR AT FULL LOAD THD OPER. AMBIENT TEMPERATURE DIMMER TYPE DIMMER D34 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D42 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D57 120/208/240/277 50/60 YES >0.9 20% -30 C ~ 60 C 0-10V % D34ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % D42ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % SUB THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

9 PM3RM TREE STRAP TOP VIEW SIDE VIEW Adjustable Nylon Strap 7 7/8" (200mm) 3 15/16" (100mm) 5 11/16" (144mm) 5 5/8" (143mm) Specify Length 3" (76mm) Minimum 3 1/8" (79mm) END VIEW OPTIONAL MOUNTING BRACKET SAFETY CABLE (4) 3/4" (19mm) Patented Knockouts For Use with Surface Conduit (By Others) 3 3/8" (86mm) 2 3/4" (70mm) O.C. (4) Clearance Holes for 1/4" (6mm) Fastener (By Others) Safety Cable with Secure Connection, No Tools Required for Assembly 9 3/8" (238mm) SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult greensource for program requirements. Tree Installation Tree Strap mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Optional stainless steel safety cable maintains UPM mounting when nylon strap is disengaged. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 3/4 NPT female conduit entries per end cap for through wiring. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts [4] 3/4 NPT, machined aluminum knockouts. High temperature, silicone O Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver (34-57W) [1] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current driver VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 4X / IP-66 Rated Enclosure. UL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Made in USA. SUB UPM s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2

10 PM3RM SURFACE MOUNT CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC Example PM3RM - SM - D57 - BZP - MT Series PM3RM PM3RM - Universal Power Module 3 Remote SM Mounting SM - Surface Mount (requires side conduit entry) Driver Type (Driver Wattage must match Fixture Wattage) For use with 0-10 Dimmer: D34-34W Dimming Driver (Standard Dimming 1-100%) D42-42W Dimming Driver (Standard Dimming 1-100%) D57-57W Dimming Driver (Standard Dimming %) D34ARC - 34W Dimming Driver (Architectural Dimming %) D42ARC - 42W Dimming Driver (Architectural Dimming %) Standard MT Premium REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Failure to comply with specific wiring requirements will void product warranty. Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP Verde VER ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper Also available in RAL es See submittal SUB Input Voltage MT VAC Input DRIVER ELECTRICAL DATA TYPE AC INPUT Frequency Hz DIMMING POWER FACTOR AT FULL LOAD THD OPER. AMBIENT TEMPERATURE DIMMER TYPE DIMMER D34 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D42 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D57 120/208/240/277 50/60 YES >0.9 20% -30 C ~ 60 C 0-10V % D34ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % D42ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % SUB THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

11 PM3RM SURFACE MOUNT TOP VIEW 9 3/8" (238mm) 8 3/4" (222mm) O.C. 7 7/8" (200mm) 3 3/8" (86mm) 2 3/4" (70mm) O.C. (4) Clearance Holes for 1/4" (6mm) Fasteners (By Others) 3 15/16" (100mm) SIDE VIEW 5 5/8" (143mm) END VIEW 3 1/4" (83mm) With Supplied Mounting Bracket (4) Patented 3/4" (19mm) Knockouts For Use with Surface Conduit (By Others) SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult greensource for program requirements. Surface Mount For use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 3/4 NPT female conduit entries per end cap for through wiring. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts [4] 3/4 NPT, machined aluminum knockouts. High temperature, silicone O Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver (34-57W) [1] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current driver VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range. All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 4X / IP-66 Rated Enclosure. UL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Made in USA. UPM s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2 SUB

12 PM3RM JUNCTION BOX (CAMLOCK ) CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC Example PM3RM - CR - D34 - BZP - MT - MB Series PM3RM PM3RM - Universal Power Module 3 Remote Mounting CR - Round CamLock Driver Type (Driver Wattage must match Fixture Wattage) For use with 0-10 Dimmer: D34-34W Dimming Driver (Standard Dimming 1-100%) D42-42W Dimming Driver (Standard Dimming 1-100%) D57-57W Dimming Driver (Standard Dimming %) D34ARC - 34W Dimming Driver (Architectural Dimming %) D42ARC - 42W Dimming Driver (Architectural Dimming %) Standard MT Premium REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Failure to comply with specific wiring requirements will void product warranty. Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP Verde VER Input Voltage Options MT VAC Input MB - Mounting Brackets ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper Also available in RAL es See submittal SUB DRIVER ELECTRICAL DATA TYPE AC INPUT Frequency Hz DIMMING POWER FACTOR AT FULL LOAD THD OPER. AMBIENT TEMPERATURE DIMMER TYPE DIMMER D34 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D42 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D57 120/208/240/277 50/60 YES >0.9 20% -30 C ~ 60 C 0-10V % D34ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % D42ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % SUB THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

13 PM3RM JUNCTION BOX (CAMLOCK ) TOP VIEW SIDE VIEW OPTIONAL MOUNTING BRACKET 3 3/8" (86mm) 2 3/4" (70mm) O.C. (4) Clearance Holes for 1/4" (6mm) Fastener (By Others) 7 7/8" (200mm) 9 3/8" (238mm) 3 15/16" (100mm) 5 5/8" (143mm) END VIEW ROUND CAMLOCK CANOPY 3 1/4" (83mm) With Supplied Mounting Plate (4) Patented 3/4" (19mm) Knockouts For Use with Surface Conduit (By Others) 1/8" (3mm) 5" Dia. (127mm) SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult greensource for program requirements. Round CamLock Canopy (Recessed Junction Box) 5 diameter, machined aluminum construction. Includes stainless steel universal mounting ring for use with 4 octagonal junction box. [2] tamperresistant, black oxide stainless steel mounting screws. 1/8 thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock provides additional 30 adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 3/4 NPT female conduit entries per end cap for through wiring. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts [4] 3/4 NPT, machined aluminum knockouts. High temperature, silicone O Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver (34-57W) [1] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current driver VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 4X / IP-66 Rated Enclosure. UL Listed. Certified to CAN/CSA Standard C22.2 No. 94.1/94.2. RoHs compliant. Made in USA. UPM s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2 SUB

14 PM3 DUAL RM TREE STRAP CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC Example PM3DRM - TS-20 - D42 - BZP - MT - SC Series For use with 0-10 Dimmer: D34 - (2) 34W Dimming Drivers (Standard Dimming 1-100%) D42 - (2) 42W Dimming Drivers (Standard Dimming 1-100%) D57 - (2) 57W Dimming Drivers (Standard Dimming %) D34ARC - (2) 34W Dimming Drivers (Architectural Dimming %) D42ARC - (2) 42W Dimming Drivers (Architectural Dimming %) PM3DRM PM3DRM - Universal Power Module 3 Dual Remote Mounting TS - Length - Tree Strap (Specify Adjustable Strap Length) Minimum 3 Adjustable Strap (Standard) Driver Type (Driver Wattage must match Fixture Wattage) Standard MT Premium REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Failure to comply with specific wiring requirements will void product warranty. Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper Input Voltage Options Verde VER MT VAC Input BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper SC - Safety Cable. For use with Tree Strap (TS) mount. Cable length to match strap length. MB - Mounting Brackets Also available in RAL es See submittal SUB DRIVER ELECTRICAL DATA TYPE AC INPUT Frequency Hz DIMMING POWER FACTOR AT FULL LOAD THD OPER. AMBIENT TEMPERATURE DIMMER TYPE DIMMER D34 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D42 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D57 120/208/240/277 50/60 YES >0.9 20% -30 C ~ 60 C 0-10V % D34ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % D42ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % SUB THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

15 PM3 DUAL RM TREE STRAP TOP VIEW SIDE VIEW Adjustable Nylon Strap 2" (51mm) 13 1/4" (336mm) 6 5/8" (168mm) END VIEW 5 11/16" (144mm) (4) 3/4" (19mm) Knockouts For Use with Surface Conduit (By Others) 5 5/8" (143mm) Specify Length 3" (76mm) Minimum 3 1/8" (79mm) OPTIONAL MOUNTING BRACKET (4) Clearance Holes for 1/4" (6 mm) Fasteners (By Others) 3 3/8" (86mm) 2 3/4" (70mm) O.C. SAFETY CABLE Safely Cable with Secure Connection, No Tools Required for Assembly 14 7/8" (378mm) SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult greensource for program requirements. Tree Installation Tree Strap mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Optional stainless steel safety cable maintains UPM mounting when nylon strap is disengaged. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. UPM s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2 Front access for ease of installation and inspection. [2] 3/4 NPT female conduit entries per end cap for through wiring. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts [4] 3/4 NPT, machined aluminum knockouts. High temperature, silicone O Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver (34-57W) [2] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current drivers VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 4X / IP-66 Rated Enclosure. UL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Made in USA. SUB

16 PM3 DUAL RM SURFACE MOUNT CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC PM3DRM Example PM3DRM - SM - D42ARC - BZP - MT Series SM PM3DRM - Universal Power Module 3 Dual Remote Mounting SM - Surface Mount (requires side conduit entry) MT REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Driver Type (Driver Wattage must match Fixture Wattage) For use with 0-10 Dimmer: D34 - (2) 34W Dimming Drivers (Standard Dimming 1-100%) D42 - (2) 42W Dimming Drivers (Standard Dimming 1-100%) D57 - (2) 57W Dimming Drivers (Standard Dimming %) D34ARC - (2) 34W Dimming Drivers (Architectural Dimming %) D42ARC - (2) 42W Dimming Drivers (Architectural Dimming %) Standard Premium Failure to comply with specific wiring requirements will void product warranty. Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP Verde VER ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper Also available in RAL es See submittal SUB Input Voltage MT VAC Input DRIVER ELECTRICAL DATA TYPE AC INPUT Frequency Hz DIMMING POWER FACTOR AT FULL LOAD THD OPER. AMBIENT TEMPERATURE DIMMER TYPE DIMMER D34 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D42 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D57 120/208/240/277 50/60 YES >0.9 20% -30 C ~ 60 C 0-10V % D34ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % D42ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % SUB THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

17 PM3 DUAL RM SURFACE MOUNT TOP VIEW SIDE VIEW 3 3/8" (86mm) 2 3/4" (70mm) O.C. (4) Clearance Holes for 1/4" (6mm) Fasteners (By Others) 14 7/8" (378mm) 14 1/8" (359mm) O.C. 13 1/4" (336mm) 6 5/8" (168mm) 5 5/8" (143mm) END VIEW 3 1/4" (83mm) With Supplied Mounting Plate (4) 3/4" (19mm) Knockouts For Use with Surface Conduit (By Others) SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult greensource for program requirements. Surface Mount For use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 3/4 NPT female conduit entries per end cap for through wiring. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts [4] 3/4 NPT, machined aluminum knockouts. High temperature, silicone O Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver (34-57W) [2] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current drivers VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range. All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 4X / IP-66 Rated Enclosure. UL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Made in USA. UPM s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2 SUB

18 PM3 DUAL RM JUNCTION BOX (CAMLOCK ) CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC PM3DRM Example PM3DRM - CR - D57 - BZP - MT - MB Series Mounting CR - Round CamLock For use with 0-10 Dimmer: D34 - (2) 34W Dimming Drivers (Standard Dimming 1-100%) D42 - (2) 42W Dimming Drivers (Standard Dimming 1-100%) D57 - (2) 57W Dimming Drivers (Standard Dimming %) D34ARC - (2) 34W Dimming Drivers (Architectural Dimming %) D42ARC - (2) 42W Dimming Drivers (Architectural Dimming %) PM3DRM - Universal Power Module 3 Dual Remote Driver Type (Driver Wattage must match Fixture Wattage) Standard MT Premium REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Failure to comply with specific wiring requirements will void product warranty. Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP Verde VER Input Voltage Options MT VAC Input MB - Mounting Brackets ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper Also available in RAL es See submittal SUB DRIVER ELECTRICAL DATA TYPE AC INPUT Frequency Hz DIMMING POWER FACTOR AT FULL LOAD THD OPER. AMBIENT TEMPERATURE DIMMER TYPE DIMMER D34 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D42 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V 1-100% D57 120/208/240/277 50/60 YES >0.9 20% -30 C ~ 60 C 0-10V % D34ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % D42ARC 120/208/240/277 50/60 YES >0.9 20% -20 C ~ 50 C 0-10V % SUB THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

19 PM3 DUAL RM JUNCTION BOX (CAMLOCK ) TOP VIEW SIDE VIEW OPTIONAL MOUNTING BRACKET (4) Clearance Holes for 1/4" (6 mm) Fasteners (By Others) 3 3/8" (86mm) 2 3/4" (70mm) O.C. 13 1/4" (336mm) 14 7/8" (378mm) 6 5/8" (168mm) 5 5/8" (143mm) END VIEW ROUND CAMLOCK CANOPY 3 1/4" (83mm) With Supplied Mounting Plate (4) 3/4" (19mm) Knockouts For Use with Surface Conduit (By Others) 1/8" (3mm) SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult greensource for program requirements. Round CamLock Canopy (Recessed Junction Box) 5 diameter, machined aluminum construction. Includes stainless steel universal mounting ring for use with 4 octagonal junction box. [2] tamperresistant, black oxide stainless steel mounting screws. 1/8 thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock provides additional 30 adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface. 5" Dia. (127mm) Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 3/4 NPT female conduit entries per end cap for through wiring. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts [4] 3/4 NPT, machined aluminum knockouts. High temperature, silicone O Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver (34-57W) [2] 1.05A (D34, D42) or 1.4A (D57), Class A, constant current drivers VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications. Dimming driver for use with standard 0-10V dimmers and switch controls. Refer to driver electrical data for dimming range. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 4X / IP-66 Rated Enclosure. UL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Made in USA. UPM s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2 SUB