Camloc Tension Latches
|
|
- Julius Carpenter
- 5 years ago
- Views:
Transcription
1 Camloc Tension Latches
2
3 Contents Page General Information... A-2 Important Information... A-3 Overview on latches... A-4 Tension Latches V934L Series... B-1 - B-2 95L Series... C-1 - C-2 V96L Series... D-1 - D L Series... E-1 - E-5 V951L Series... F-1 - F-6 V917L & 1449L Series... G-1 - G-5 V18L Series... H-1 - H-4 V46L Series... I-1 Slam Latches 2939L Series... J-1 52F Series... K L Series... L-1 - L-6 Index Release ovember 2016 A-1
4 General Information The Camloc brand was established in Since that time our fastening systems have been successfully integrated into numerous applications within many different industries. Ourcustomersbenefitfromourmorethan70yearsoffasteningexperience. We provide local support for innovative, high quality fastening systems supplied globally to the strictest environmental and working conditions. Certificate of Registration QUALITY MAAGEMET SYSTEM - ISO/TS 16949:2009 Certificate of Registration EVIROMETAL MAAGEMET SYSTEM - ISO 14001:2004 This is to certify that: Alcoa Fastening Systems Kelkheim Operations Fairchild Fasteners Europe-Camloc GmbH Industriestrasse Kelkheim Germany This is to certify that: Alcoa Fastening Systems & Rings Kelkheim Operations Fairchild Fasteners Europe-Camloc GmbH Industriestrasse 6 Kelkheim Germany Holds Certificate o: TS and operates a Quality Management System which complies with the requirements of ISO/TS 16949:2009 for the following scope: Holds Certificate o: EMS and operates an Environmental Management System which complies with the requirements of ISO 14001:2004 for the following scope: Design and manufacture of fasteners and fastener solutions. Design and manufacture of fasteners and fastener solutions For and on behalf of BSI: Frank Lee, EMEA Compliance & Risk Director For and on behalf of BSI: Frank Lee, EMEA Compliance & Risk Director Issue Date: 07/04/2016 Latest Issue: 07/04/2016 Expiry Date: 14/09/2018 IATF umber: Page: 1 of 1 Original Registration Date: 05/07/2007 Effective Date: 18/03/2016 Latest Revision Date: 16/03/2016 Expiry Date: 14/09/2018 Page: 1 of 1 This certificate was issued electronically and remains the property of BSI and is bound by the conditions of contract. An electronic certificate can be authenticated online. Printed copies can be validated at or telephone +44 (0) Further clarifications regarding the scope of this certificate and the applicability of ISO/TS16949 requirements may be obtained by consulting the organization. IATF Contracted Office: BSI Group Americas Inc., Worldgate Drive, Suite 800, Herndon, VA USA. BSI (EMEA) Headquarters: 389 Chiswick High Road, London, W4 4AL, United Kingdom This certificate was issued electronically and remains the property of BSI and is bound by the conditions of contract. An electronic certificate can be authenticated online. Printed copies can be validated at or telephone +971 (4) Information and Contact: BSI, Kitemark Court, Davy Avenue, Knowlhill, Milton Keynes MK5 8PP. Tel: BSI Assurance UK Limited, registered in England under number at 389 Chiswick High Road, London W4 4AL, UK. ISO/TS 16949: 2009 DI E ISO : 2004 Pleasefindadditional informationaboutourenvironmental programunder: Your Alcoa Fastening Systems team Disclaimer: Parts listed are subject to technical changes. All dimensions in mm. All information is correct to the best of our knowledge at the time of printing. o liability for disadvantages caused by printing errors or false application. A-2 Release ovember 2016
5 Tension Latches Important Information How It Operates Drawhook center beyond common center line in locked position of base and strike Achsstift Pin Secondary Sicherung lock (optional) (Federraste) - push to unlock Handle Adjustable Base Rivet Stop drawhook Strike ntension latches provide a quick release yet secure locking mechanism. They can take high tensile loads. Shear forces must be kept off the tension latch by the assembly design. nthrough lever action, the panels connected with the tension latch and the strike are pulled together. If necessary, a stop must be provided. npositive lock is achieved when drawhook center is beyond the common center line of the base and strike. Pin Spring-steel drawhook Drawhook center beyond common center line in locked position Stroke nforunlocking,thesecondarylock,iffitted,isoperatedandthehandlelifted. For locking, the secondary lock automatically engages. nmost of the tension latches can be adjusted by a threaded drawhook. For non-threaded drawhook series the spring steel or wire drawhook gives tolerance compensation and joint tension. Release ovember 2016 A-3
6 Tension Latches Important Information Overview Latches Series Max. tensile strength Working load without secondary lock with secondary lock with hasp to rivit on or to screw on to weld on adjustable drawhook carbon steel with surface treatment Stainless steel Pages V934L B1-B2 95L C1-C2 V96L D1-D2 1429L E1-E5 V951L F1-F6 V917L G1-G5 V18L H1-H4 V46L I1 * Limitations within series possible. Please see (foot) notes at catalogue pages. A-4 Release ovember 2016
7 V934L Series Max. tensile strength 550 Working load 310 Style Dimensions Materials / Finish Part o. Stainless steel V934L01-1-1BP V934L01-1-1AGV With secondary lock Stainless steel V934L01-1X1BP V934L01-1X1AGV secondary lock Strikes Style Dimensions Materials / Finish D Part o. Stainless steel 1) 2,6 V934L02-1BP V934L02-1AGV Release ovember 2016 B-1
8 V934L Series Installation Instructions Dimensions A A = min. 23,7 mm, please take into account the application preload and tolerance requirements B-2 Release ovember 2016
9 95L Series Max. tensile strength 445, working load 220 Handle conceals all interior parts and strike Self-compensating spring steel drawhook Lowprofile Style Dimensions Materials / Finish Part o. Self-compensating spring steel drawhook Stainless steel V95L07-1-1BC Self-compensating spring steel drawhook Steel / chrome-plated Interiorparts: V95L15-1BD Strike Style Dimensions Materials / Finish Part o. Stainless steel V95H07-1-1BP Release ovember 2016 C-1
10 95L Series Installation Instructions Dimensions Spring steel drawhook tension latch / strike F V95L07-1-1BC C-2 Release ovember 2016
11 V96L Series Max. tensile strength 1.000, working load 650. Handle conceals all interior parts and strike Self-compensating spring steel drawhook Lowprofile Style Dimensions Materials / Finish D Part o. Self-compensating spring steel drawhook 2,5 3,2 V96L01-1-1AO V96L01-1-2AO Steel / chrome-plated Interiorparts: 2,5 3,2 V96L01-1-1AG V96L01-1-2AG Strike Style Dimensions Materials / Finish D Part o. 2,5 3,2 V96H01-1-1AO V96H01-1-2AO Release ovember 2016 D-1
12 V96L Series Installation Instructions Dimensions * Ø D see selected version. D-2 Release ovember 2016
13 1429L Series Max. tensile strength 1.500, working load up to 1.000, see footnotes. Available with secondary lock Three different drawhook types available Style Dimensions Materials / Finish D Part o. Spring steel drawhook 1) 3,1 1429L02-1-1AG Stainless steel 2) 3,1 1429L02-1-1BP Wire drawhook 1) 3,1 1429L02-2-1AG Stainless steel 3) 3,1 1429L02-2-1BP 1) Max.tensilestrength:450with1429L8-1AGstrike,workingload330. 2) Max.tensilestrength:300with1429L8-1BPstrike,workingload210. 3) Max.tensilestrength:1.500with1429L9-1AG/-1BPstrike,workingload Release ovember 2016 E-1
14 1429L Series Tension Latch Style Dimensions Materials / Finish D Part o. Hooked wire drawhook 1) 3,1 1429L02-3-1AG Stainless steel 1) 3,1 1429L02-3-1BP Spring steel drawhook and secondary lock 2) 3,1 1429L02-1X1AG Stainless steel 3) 3,1 1429L02-1X1BP 1) Max.tensilestrength:1.100with1429L9-1AG/-1BPstrike,workingload800. orinconjunctionwithmatingcomponentprofile. 2) Max.tensilestrength:450with1429L8-1AGstrike,workingload330. 3) Max.tensilestrength:300with1429L8-1BPstrike,workingload210. E-2 Release ovember 2016
15 1429L Series Tension Latch Style Dimensions Materials / Finish D Part o. Wire drawhook and secondary lock 1) 3,1 1429L02-2X1AG Stainless steel 1) 3,1 1429L02-2X1BP Hooked wire drawhook and secondary lock 2) 3,1 1429L02-3X1AG Stainless steel 2) 3,1 1429L02-3X1BP 1) Max.tensilestrength:max.1.500with1429L9-1AG/-1BPstrike,workingload ) Max.tensilestrength:max.1.100with1429L9-1AG/-BPstrike,workingload800. orinconjunctionwithmatingcomponentprofile. Release ovember 2016 E-3
16 1429L Series Strikes Style Dimensions Materials / Finish D Part o. For use with spring steel drawhook 3,1 1429L8-1AG Stainless steel 3,1 1429L8-1BP For use with wire drawhook 3,1 1429L9-1AG Stainless steel 3,1 1429L9-1BP E-4 Release ovember 2016
17 1429L Series Installation Instructions Dimensions Spring steel drawhook tension latch / strike 1429L02-1-* 1429L8-* Wire drawhook tension latch / strike 1429L02-2-* 1429L9-* Hokkedwiredrawhooktensionlatch/matingcomponentprofile 1429L02-3-* (1429L9-*) Release ovember 2016 E-5
18
19 V951L Series Max. tensile strength 2.300, working load max 1.550, see footnotes. Adjustable drawhook Available with secondary lock and hasp Style Dimensions Materials / Finish Mounting Type 1) D L Part o. Open base 2) 3,6 14,3 V951L02-1-1AGV 2) 4,2 12,7 V951L02-1-5AGV adjustable Base: Steel / zinc-plated 2) Steel / chrome-plated Interiorparts: 2) S - 3,6-14,3 V951L02-1-2AGV V951L02-1-1AD Stainless steel 3) 3,6 14,3 V951L02-1-1BP Stainless steel 3) 4,2 12,7 V951L02-1-5BP Stainless steel 3) S - - V951L02-1-2BP Concealed base 4) 3,6 14,3 V951L03-1-1AGV 4,2 12,7 V951L03-1-5AGV adjustable Steel / chrome-plated Interiorparts: 3,6 14,3 V951L03-1-1AD Stainless steel 3,6 14,3 V951L03-1-1BP Stainless steel 4,2 12,7 V951L03-1-5BP 1) Mountingtype: =Withholesforrivetingorscrewfixing S = Without holes, for welding 2) Max.tensilestrength:2.300withV951L07-*A*andV951L52-1A*strike,workingload with V951L50-1A* strike, working load ) Max.tensilestrength:1.500withV951L07-*BPandV951L52-1BPstrike,workingload ) Due to the mounting geometry, tensile strength reduced to approx. 1200, working load 800. Release ovember 2016 F-1
20 V951L Series Tension Latch Style Dimensions Materials / Finish Mounting Type 1) D L Part o. Secondary lock, open base 2) 3,6 14,3 V951L04-1X1AGV 2) 4,2 12,7 V951L04-1X5AGV adjustable Steel / chrome-plated Interiorparts: Secondarylock: Stainless steel 3,6 14,3 V951L04-1X1AD Stainless steel 3) 3,6 14,3 V951L04-1X1BP Stainless steel 3) 4,2 12,7 V951L04-1X5BP Stainless steel 3) S - - V951L04-1X2BP Secondary lock, concealed base 4) 4,2 12,7 V951L03-1X5AGV adjustable Steel / chrome-plated Interiorparts: Secondarylock: Stainless steel Stainless steel 3,6 3,6 14,3 14,3 V951L03-1X1AD V951L03-1X1BP Stainless steel 4,2 12,7 V951L03-1X5BP For footnotes refer to page F-1. F-2 Release ovember 2016
21 V951L Series Tension Latch Style Dimensions Materials / Finish Mounting Type 1) D Part o. Secondary lock, high base Secondarylock: Stainless steel 2) 4,2 V951L05-1X1AGV Stainless steel 3) 4,2 V951L05-1X1BP adjustable Hasp 2) Base: Steel / zinc-plated S - V951L01-1Y2AGV Ø 2) 4,2 V951L01-1Y5AGV adjustable Hasp for Padlock Ø 6 max. For footnotes refer to page F-1. Release ovember 2016 F-3
22 V951L Series Strikes Style Dimensions Materials / Finish Mounting Type 1) D Part o. Open 3,6 V951L7-1AGV 4,2 V951L7-5AGV Steel / zinc-plated S 2) - V951L7-2AZ Steel / chrome-plated 3,6 V951L7-1AD Stainless steel 3,6 V951L7-1BP Stainless steel 4,2 V951L7-5BP Stainless steel S - V951L7-2BP Closed 4,2 V951L50-1AGV Stainless steel 4,2 V951L50-1BP Stainless steel 3,6 V951L50-2BP Stainless steel S - V951L50-3BP Corner mounting 4,2 V951L52-1AGV Stainless steel 4,2 V951L52-1BP 1) Mountingtype: =Withholesforrivetingorscrewfixing S = Without holes, for welding 2) Material C45,HRC36-39steel,pleaseusehigh-alloyfillerweldingrods F-4 Release ovember 2016
23 V951L Series Installation Instructions Dimensions Open-base tension latch / open strike (71,5) (Dimension for weld mounting) Select diameter D and distance L in accordance with the strike and tension latch style. Concealed-base tension latch / open strike (59) (Dimension for weld mounting) Select diameter D and distance L in accordance with the strike and tension latch style. Open-base tension latch / closed strike (100) (Dimension for weld mounting) (83,5) (Dimension for weld mounting) V951L02- V951L04- V951L01- V951L7- V951L03- V951L7- V951L02- V951L04- V951L01- V951L50- V951L05- Select diameter D and distance L in accordance with the strike and tension latch style. Release ovember 2016 F-5
24 V951L Series Installation Instructions Dimensions Concealed-base tension latch / closed strike (71) (Dimension for weld mounting) Select diameter D and distance L in accordance with the strike and tension latch style. Open-base tension latch / corner-mounting strike (70) (Dimension for weld mounting) Select diameter D and distance L in accordance with the strike and tension latch style. Concealed-base tension latch / corner-mounting strike (57,5) (Dimension for weld mounting) V951L03- V951L50- V951L02- V951L04- V951L01- V951L52- V951L03- V951L52- Select diameter D and distance L in accordance with the strike and tension latch style. F-6 Release ovember 2016
25 V917L Series Max. tensile strength 3.600, working load max , see footnotes. Adjustable drawhook Available with secondary lock and hasp Style Dimensions Materials / Finish Mounting Type 1) D Part o. Open base 2) 5,1 V917L01-1-1AG Stainless steel 3) 5,1 V917L01-1-1BP High base 2) 4,2 V17L12-1-1AA adjustable adjustable 1) Mountingtype: =Withholeforrivetingorscrewfixing S = Without holes, for welding 2) Max.tensilestrength:3.200withV917L11-1-*AGstrike,workingload with V951L50-1- *AGV strike, working load ) Max.tensilestrength:3.600withV951L50-1-*BPstrike,workingload max with V917L11-1-1BP strike, working load Release ovember 2016 G-1
26 V917L Series Tension Latch Style Dimensions Materials / Finish Mounting Type 1) D Part o. Secondary lock, open base 2) 5,1 V917L01-1X1AG Stainless steel 3) 5,1 V917L01-1X1BP adjustable Stainless steel 3) Stainless steel V4A 3) S - 5,1 V917L01-1X2BP V917L01-1X1CP Stainless steel V4A 3) S - V917L01-1X2CP Secondary lock, high base 2) 4,2 V17L12-2X1AA Secondary lock, for curved surfaces (R min = 125 mm) 2 5,0 1449L02-1X1AG Stainless steel 3) 5,0 1449L02-1X1BP adjustable adjustable For footnotes refer to page G-1. G-2 Release ovember 2016
27 V917L Series Tension Latch Style Dimensions Materials / Finish Mounting Type 1) D Part o. Open base, with hasp 2 5,1 V917L01-1Y1AG Strikes Style Dimensions Materials / Finish Mounting Type 1) D Part o. Open 8,5 + _ 0, ,6 5,1 V917L11-1-1AG 12,5 + 1 _ 17,8 + 0,5 _ 5,5 4,2 V917L11-1-3AG 2 Ø D 11 Stainless steel 5,1 V917L11-1-1BP Closed 8 max ,2 V951L50-1AGV 30,5 max adjustable 5,1 V951L50-5AGV 2 Ø D 6 Stainless steel 4,2 V951L50-1BP 12,7 Stainless steel S - V951L50-3BP For footnotes refer to page G-1. Release ovember 2016 G-3
28 V917L Series Installation Instructions Dimensions Open-base tension latch / open strike (98) (Dimension for weld mounting) Select diameter D in accordance with the strike style. Open-base tension latch / closed strike (105) (Dimension for weld mounting) Select diameter D in accordance with the strike style. Tension latch for curved surfaces V917L01- V917L11- V917L01- V951L L02- V951L50- Select diameter D in accordance with the strike style. G-4 Release ovember 2016
29 V917L Series Installation Instructions Dimensions High-base tension latch / open strike V17L12- V917L11- Select diameter D in accordance with the strike style. Release ovember 2016 G-5
30
31 V18L Series Max. tensile strength 6.000, working load max , see footnotes. Adjustable drawhook Available with secondary lock, hasp and lift spring Style Dimensions Materials / Finish Mounting Type 1) D Part o. 2) 5,1 V18L01-1-1AA Stainless steel 3) 5,1 V18L01-1-1BF Stainless steel 3) S - V18L01-1-2BF With secondary lock 2) 5,1 V18L01-1X1AA Stainless steel 3) 5,1 V18L01-1X1BF Stainless steel 3) S - V18L01-1X2BF adjustable adjustable 1) Mountingtype: =Withholeforrivetingorscrewfixing S = Without holes, for welding 2) Max.tensilestrength:6.000withV18L13-1-1AAstrike,workingload ) Max.tensilestrength:4.600withV18L13-1-*BFor1449L07-1BPstrike,workingload Release ovember 2016 H-1
32 V18L Series Tension Latch Style Dimensions Materials / Finish Mounting Type 1) D Part o. Hasp 2) 5,1 V18L01-1Y1AA adjustable Accessories Dimensions Materials / Finish Mounting Type 1) D Part o. Lift spring Stainless steel 5,1 V18L45-1BP Lift spring For footnotes refer to page H-1. H-2 Release ovember 2016
33 V18L Series Strikes Style Dimensions Materials / Finish Mounting Type 1) D Part o. Open 2) 5,1 V18L13-1-1AA Stainless steel 5,1 V18L13-1-1BF Stainless steel S - V18L13-1-2BF Closed Stainless steel 5,0 1449L07-1BP For footnotes refer to page H-1. Release ovember 2016 H-3
34 V18L Series Installation Instructions Dimensions Tension latch / open strike (135,5) (Dimension for weld mounting) Tension latch / closed strike V18L01- V18L13- V18L L07- (135) (Dimension for weld mounting) H-4 Release ovember 2016
35 V46L Series Max. tensile strength 4.500, working load Adjustable drawhook Style Dimensions Materials / Finish Mounting Type 1) D Part o. Steel / zinc-plated and yellow chromate 6,3 V46L38-1-6AA Steel / zinc-plated and yellow chromate S - V46L38-1-1AA adjustable Strike Style Dimensions Materials / Finish Mounting Type 1) D Part o. Steel / zinc-plated and yellow chromate 5,1 V18L13-1-1AC 1) Mountingtype: =Withholeforrivetingorscrewfixing S = Without holes, for welding Release ovember 2016 I-1
36
37 2939L Series Style Dimensions Materials / Finish C Part o. Slam latch Plastic (POM) black -10 up to L K Installation Instructions Dimension Locked Unlocked Frame * Other panel thicknesses upon request. Release ovember 2016 J-1
38
39 52F Series Wing Fastener Particular Features Simple and economic fastener for lids, etc. Easy installation by blind riveting. ¼ Turn to lock Secure locking on detent. Dimensions Materials / Finish C Part o. Mandrel E02-*-1AG Blind rivet Belleville spring washer Height H Selection and Installation Instructions Alternative 1 dimpled Riveted by standard blind rivet pliers. Breaking load 5000 Wing fastener Slam Rivet - Ø 2,6 DI 660 Frame DI 660-2,5 Alternative 2 Panel Frame Part o. Panel Thickness P Height H 52E AG 52E AG 52E AG 0(flush) 1 2 0,7 1,1 1,7 Release ovember 2016 K-1
40
41 2812L Series Slam Latch Particular Features Robust slam latch, self locking Max.lockingforce:230 Max.tensionstrength:2.400 Max. torque:40m Dimensions Materials / Finish Type C Part o. Steel / zinc-plated and yellow chromated Catch:zincflakecoated A L03-1AF Steel / zinc-plated and yellow chromated Catch:zincflakecoated B L03-2AF Release ovember 2016 L-1
42 2812L Series Slam Latch Dimensions Materials / Finish L C Part o. Steel / zinc-plated and yellow chromated Catch:zincflakecoated L05-1AF Steel / zinc-plated and yellow chromated Catch:zincflakecoated L05-2AF Steel / zinc-plated and yellow chromated Catch:zincflakecoated L06-1AF L-2 Release ovember 2016
43 2812L Series Slam Latch Dimensions Materials / Finish C Part o. Steel / zinc-plated and yellow chromated Catch:zincflakecoated L07-1AF Steel / zinc-plated and yellow chromated Catch:zincflakecoated L08-1AF Release ovember 2016 L-3
44 2812L Series Slam Latch Dimensions Materials / Finish C Part o. Steel / zinc-plated and yellow chromated Catch:zincflakecoated L09-1AF L-4 Release ovember 2016
45 2812L Series Slam Latch Dimensions Materials / Finish C Part o. Plastic (POM) / black -25 up to L80-1K tobeusedwith: 2812L03-1AF 2812L03-2AF 2812L08-1AF 2812L09-1AF Plastic (PA6) / black tobeusedwith: 2812L03-1AF 2812L03-2AF 2812L08-1AF 2812L09-1AF -40 up to L82-1K Release ovember 2016 L-5
46 2812L Series Installation Instructions Dimension Turn to unlock Frame Door (movable) Bale or locking bolt (not included) L-6 Release ovember 2016
47 Release ovember 2016 Index Part o. Page V18L13-1-2BF H3 V18L13-1-1AC I1 V18L45-1BP H2 V46L38-1-6AA I1 V46L38-1-1AA I1 V917L01-1-1AG G1 V917L01-1-1BP G1 V917L01-1X1AG G2 V917L01-1X1BP G2 V917L01-1X2BP G2 V917L01-1X1CP G2 V917L01-1X2CP G2 V917L01-1Y1AG G3 V917L11-1-1AG G3 V917L11-1-3AG G3 V917L11-1-1BP G3 V934L01-1-1AGV B1 V934L01-1X1AGV B1 V934L02-1AGV B1 V934L01-1-1BP B1 V934L01-1X1BP B1 V934L02-1BP B1 V95H07-1-1BP C1 V95L07-1-1BC C1 V95L15-1BD C1 V951L01-1Y2AGV F3 V951L01-1Y5AGV F3 V951L02-1-1AD F1 V951L02-1-1AGV F1 V951L02-1-1BP F1 V951L02-1-2AGV F1 V951L02-1-2BP F1 V951L02-1-5AGV F1 V951L02-1-5BP F1 V951L03-1-1AD F1 V951L03-1-1AGV F1 V951L03-1-1BP F1 V951L03-1-5AGV F1 V951L03-1-5BP F1 V951L03-1X1AD F2 V951L03-1X1BP F2 V951L03-1X5AGV F2 Part o. Page V951L03-1X5BP F2 V951L04-1X1AD F2 V951L04-1X1AGV F2 V951L04-1X1BP F2 V951L04-1X2BP F2 V951L04-1X5AGV F2 V951L04-1X5BP F2 V951L05-1X1AGV F3 V951L05-1X1BP F3 V951L50-1AGV F4,G3 V951L50-1BP F4,G3 V951L50-2BP F4 V951L50-3BP F4,G3 V951L50-5AGV G3 V951L52-1AGV F4 V951L52-1BP F4 V951L7-1AD F4 V951L7-1AGV F4 V951L7-1BP F4 V951L7-2AZ F4 V951L7-2BP F4 V951L7-5AGV F4 V951L7-5BP F4 V96H01-1-1AO D1 V96L01-1-1AG D1 V96L01-1-1AO D1 V96H01-1-2AO D1 V96L01-1-2AG D1 V96L01-1-2AO D1 Part o. Page 1429L02-1-1AG E1 1429L02-1-1BP E1 1429L02-1X1AG E2 1429L02-1X1BP E2 1429L02-2-1AG E1 1429L02-2-1BP E1 1429L02-2X1AG E3 1429L02-2X1BP E3 1429L02-3-1AG E2 1429L02-3-1BP E2 1429L02-3X1AG E3 1429L02-3X1BP E3 1429L8-1AG E4 1429L8-1BP E4 1429L9-1AG E4 1429L9-1BP E4 1449L02-1X1AG G2 1449L02-1X1BP G2 1449L07-1BP H3 2812L03-1AF L1 2812L03-2AF L1 2812L05-1AF L2 2812L05-2AF L2 2812L06-1AF L2 2812L07-1AF L3 2812L08-1AF L3 2812L09-1AF L4 2812L80-1K L5 2812L82-1K L5 2939L K J1 52E02-*-1AG K1 V17L12-1-1AA G1 V17L12-2X1AA G2 V18L01-1-1AA H1 V18L01-1-1BF H1 V18L01-1-2BF H1 V18L01-1X1AA H1 V18L01-1X1BF H1 V18L01-1X2BF H1 V18L01-1Y1AA H2 V18L13-1-1AA H3 V18L13-1-1BF H3
48
Camloc Quick-Operating
Camloc Quick-Operating Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 Overview Quick-Operating Fasteners...
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationSelection Contents H Page No.
CAMLOC LATCES Included in this catalog is a wide choice of tension latches, pawl latches, flush-mounted panel latches and chassis latches. Each design provides secure lock-up, quick operating action and
More informationPLASTIC PIPE VALVES (PPV)
PLSTI PIPE VLVES (PPV) THE EFINITIVE GUIE EITION 2 heatingthroughinnovation. the following scope: Member of the SI Group of ompanies. PLSTI PIPE VLVES (PPV) plastic Pipe Valves (PPV) Maximum versatility,
More information2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
More informationCertificate of Registration
Certificate of Registration PRODUCTION AND MANAGEMENT SYSTEM This is to certify that Company Name United Plantations Berhad Management Unit Name United International Enterprise Palm Oil Mill Company Address
More informationAlcoa Fastening Systems
ontents Page General Information... A-2 Features of KEENSERTS... A-3 - A-4 Installation Instructions... A-5 KNM Series (miniature inserts metric)... B-1 KNM Series (lightweight inserts metric)... B-2 KNHM
More information4002 Series. Determing the stud length number when using receptacle: Type Type 3. G = P + F (8,9 min.) Release January 2009 G-1
Particular Features Max. tensile strength.00 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle design. Floating receptacles available. Selection Instructions
More information91 Draw Latch. Secondary Catch. Ø 2.6 (.102) Rivet holes (2.27) 9º 16.0 (.63) ACTUAL SIZE 10.1±0.1 (.398±.004) (.102 ) S +.
Under-center mall Adjustable 217 Latch tandard 23.6 10.1 (.93) (.398) 57.7 (2.27) Latch shown with 91-630-XX keeper 10.1 (.398) econdary Catch 23.6 10.1 (.93) (.398) 15.8 (.62) 17 (.67) 57.7 (2.27) Latch
More informationTelescopic Cover Support
6-170.01 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely,
More informationQUICK OPERATING 1/4-TURN FASTENERS
50F Series. General Purpose Stud Assemblies and Receptacles Features: Designed for use in agricultural, industrial, and similar environments where a simplified rugged design is desired. Studs are retained
More informationACCESS SOLUTIONS NEW PRODUCTS BROCHURE.
ACCESS SOLUTIONS NEW PRODUCTS BROCHURE www.essentraaccesssolutions.com ESSENTIAL SOLUTIONS DELIVERED NEW PRODUCTS Locks Hinges Gaskets Handles Stainless Steel Products Electronic p3-6 p13 14 p17-18 p7-8
More informationMANN+HUMMEL ENTARON XD The flexible all-rounder for your high flow requirements
MANN+HUMMEL ENTARON XD The flexible all-rounder for your high flow requirements ENTARON XD: developed for high requirements The new ENTARON XD series from MANN+HUMMEL sets new standards for two-stage air
More informationSTATE OF NORTH CAROLINA D DEPARTMENT OF ADMINISTRATION MARCH 20, 1995 PURCHASE AND CONTRACT DIVISION 7125-LM-2C November 9, 1989
STATE OF NORTH CAROLINA 7125-2D DEPARTMENT OF ADMINISTRATION MARCH 20, 1995 PURCHASE AND CONTRACT DIVISION Superseding 7125-LM-2C November 9, 1989 SPECIFICATION FOR LOCKERS, METAL (This specification is
More informationDavidson s. Electrical. Capability Statement
Davidson s Electrical Capability Statement About us Davidson s Electrical is a locally owned company which was established in 1967. In 1999 we relocated to the Parkhurst Industrial Estate at 5 Featherstone
More information.S CAT-HYSCKT
.S CAT-HYSCKT-2016-1 CONTENTS HYTORC SOCKETS HYTORC SOCKET OVERVIEW... 5 NEW HYTORC SOCKET COATING... 7 ½ DRIVE SOCKETS... 8 12PT ½ DRIVE SOCKETS... 11 ¾ DRIVE SOCKETS... 12 12PT ¾ DRIVE SOCKETS... 17
More information19 Swell Action Latch
150 19 Swell Action Latch Plastic ylon and glass-filled nylon black with rubber bushing Ø 2.4 (.09) Acorn nut M6 Thread 39 (1.53) Handle / tee shaft sub-assembly 1.5 (.059) 400 (90lbf) 2.5 (.098) 690 (155lbf)
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationMEILLER Roll-Off Tipper
MEILLER Roll-Off Tipper www.meiller.com MEILLER - success and corporate culture with tradition Karlsruhe plant Ulm plant F. X. MEILLER GmbH & Co KG is a Munich family enterprise which has enjoyed an exceptional
More informationThread Forming Technology for Light Metals
Thread Forming Technology for Light Metals Cost & Design Savings Advantages High joint strength Safety against dynamic loads Consistently high clamp loads Self-locking vibration resistance Easy lead-in,
More information. Ball catch and counterpart: brass or brass, chrome plated
www.dirak.com 6-130 Dual Ball Catch Material:. Ball catch and counterpart: brass or brass, chrome plated. Spring: stainless steel Ball: stainless steel chrome Ball catch Counterpart Assembly brass plated
More informationDoor Interlock Switches
HSE Series HSE Series Miniature Solenoid Locking Switches Overview X Series E-Stops HSE features: World s smallest 4 contact solenoid interlock switch. (3 x x 46 mm) Four contacts Gold-plated contacts
More informationModularity and simplicity in action. ÂÂ Cost effective, easy to design and install
84 E5 Cam Latches Overview Modularity and simplicity in action The SOUTHCO E5 cam latch is a highly modular and easy to configure solution, suitable for a wide range of applications. By changing any of
More informationSlam-Cam Page. Material: a) Slam-Cam: zinc die, chrome plated Spring: steel, zinc plated Washer: Teflon
Slam-Cam Page 1-264 Slam-Cam for Slam Doors. Locking without key or tool. To a): The Teflon washer replaces the wave washer underneath the insert. Used with all Quarter- Turns and inserts according to
More informationSECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
More informationHinge Wing Safety Interlock Switches
Hinge Wing Safety Interlock Switches SI-HG80 Series Safety Interlock Switches Encapsulated in a Load-Bearing Hinge Inline QD Fitting Right-Angle QD Fitting Features Safety switch is integrated and encapsulated
More informationOperating instructions Actuator and Emergency exit AZ/AZM 200-B30 AZ/AZM 201-B About this document. Content
1. About this document Operating instructions............pages 1 to 10 Original 1.1 Function This operating instructions manual provides all the information you need for the mounting, set-up and commissioning
More informationWindow Locking 10YEAR. whitco.com.au
Window Locking 10YEAR whitco.com.au Contents CYL4 Push Lock CYL4 Mini Push Lock CYL4 Multi Bolt CYL4 Patio Bolt page 4 page 6 page 7 page 8 CYL4 Window Bolt CYL4 Mini Window Bolt Keyed Sash Lock Safety
More informationInstallation instructions Primor 100
Content 1 General instructions 2 2 Installation input unit Primor RO 2 3 Installation input unit Primor RE 4 4 Installation lock Primor 100 6 5 Connection input unit/lock 9 6 Functional test 9 Carl Wittkopp
More informationSECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.
Section 10_51_13_MetalLockerPenco-ProTough_8-19-09 PART 1 GENERAL SECTION 10 51 13 METAL LOCKERS 1.01 SECTION INCLUDES A. Heavy Duty Welded Tubular Frame Lockers. B. Locker benches. 1.02 REFERENCES A.
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Handle controlled opening arrester Wilh. Schlechtendahl
More informationFloor Doors. Babcock-Davis Always right there.
Babcock-Davis Babcock-Davis floor, vault, and sidewalk doors provide reliable and safe access below ground and between building floors. With Babcock-Davis, we build our services around your specified needs.
More informationTable of Contents. Latches. Page. Two-Rotor. Single-Rotor 050- Sliding Bolt. Dead Bolt Two-Rotor Latch... 11
Table of Contents Latches Page Two-Rotor 050-0100 Two-Rotor Latch... 11 050-0103 Two Rotor Latch 2-Position Intertrip... 12 050-0107 Two-Rotor Latch With Coaxial Trip... 12 050-0110 Two-Rotor Single-Position
More informationPush buttons and Visual indicators
Push buttons and Visual indicators Catalogue PDE2587TCUK December 2014 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
More informationTelescopic Cover Support
6-170.01 Telescopic Cover Support long, steel zinc plated Telescopic Cover Support for covers and desk-leafs with automatic locking and release device. Extending the telescopic cover support completely,
More informationSECTION METAL LOCKERS
SECTION 10 5113 METAL LOCKERS This section includes editing notes to assist the user in editing the section to suit project requirements. These notes are included as hidden text, and can be revealed or
More informationLift & turn series Flush style Adjustable grip. Door thickness Maximum 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06)
96 62 Compression Latch Lift & turn series Flush style Adjustable grip Low profile Easy grip adjustment Zinc alloy, powder coated or chrome plated and steel, zinc plated Maximum static load: 220N (50 lbf)
More informationBenteler Distribution. Steel tube solutions for hydraulic and pneumatic applications
Benteler Distribution Steel tube solutions for hydraulic and pneumatic applications Benteler Distribution Customized steel tube solutions for challenging requirements Benteler Distribution is an internationally
More informationDoor thickness Max. 3 (.13) Gasket Door 27 (1.06) *Cup gasket 45 (1.78) 1 (.06) Frame for top latching. R 0.5 (.02) Max. 8.6 (.34)
64 62 Compression Latch Small Lift & turn series Flush style Adjustable grip Low profile when latched Zinc alloy, powder coated or chrome plated and steel, zinc plated Max. static load: 220N (50 lbf) Compression
More informationLocking and Security Information
Master key system Comprehensive building situation requires locking systems. The scope and the complexity of these systems is depend on the size of the building, the number of doors and the user function
More informationDC Single-Acting High Performance Solenoids
DC Single-Acting High Performance Solenoids 1 Product group G TC A Function Increasing magnetic force vs. stroke characteristic Push and pull type Construction Robust closed cylindrical design Fastening
More informationSECTION METAL ATHLETIC SPORT LOCKERS
SECTION 10 50 13 - METAL ATHLETIC SPORT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationPull Action Latch Clamps
6.1 Pull Action Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
More informationstyle vision & miscellaneous miscellaneous section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
miscellaneous vision & style miscellaneous INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 311 miscellaneous No. 16377 No. 16858 Carb
More informationRepair Splicing System
Repair Splicing System www.dextragroup.com 2 Dextra: / Repair Splicing System Product features The RepairGrip system is a portable system designed to splice bars in situ. It is a simple and proven method
More informationBYPASS SERIES GLOBAL STANDARD COOLER
BYPASS SERIES GLOBAL STANDARD COOLER OIL-to-AIR COOLING SYSTEMS WITH integrated Bypass and AC-MOTOR Product Information AKG-Line is a standard line of products from the market leader in high performance
More informationE3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
More informationQuarter turns. Quarter turns J-1
Quarter turns Further materials and surface finishes on demand. We will be pleased to give you advice. J-1 Quarter turns Quarter-turns have been inserted in the most varied technical ranges, because of
More informationabout southco CONNECT CREATE INNOVATE 5 Years of Continuous Development
Southco s ROTARY Latching solutions CONNECT CREATE INNOVATE THE R4 ROTARY LATCH SYSTEM 5 Years of Continuous Development Over the last 5 years, Southco has invested in the expansion of our rotary latching
More informationEBBERT RIVETING SOLUTIONS SALES & ENGINEERING GUIDE
EBBERT RIVETING SOLUTIONS SALES & ENGINEERING GUIDE 06-05-015 HK1060 CONTENTS CONTENTS... TOOLS ERT1S... & 4 ERTS...5 & 6 ERTS...7 & 8 ERT4S...9 & 10 ERT5S...11 & 1 ERT6S...1 & 14 ERTSMQ...15 & 16 ERT9
More informationIndexing Plunger 417. Triangular Knobs, Made from Plastic. Triangular Knobs, Made from Stainless Steel
Standard Parts for Operating - Overview Cam-Action Indexing Plungers / Indexing Plungers Cam-Action Indexing Plunger 612, Made from Steel and Stainless Steel Page 532 Page 533 Indexing Plunger 417 Indexing
More informationMaterial: Hinge Parts: zinc die, matt chrome plated, or zinc die, matt black. Pin: stainless steel Nut plate: steel, zinc plated
4-249 Hinge Pr01 180 Small elegant hinge. 180 Opening. Adjustments are possible with respective bores provided. The nut plate can be mounted in different ways, according to the application. zinc die, matt
More informationS: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
More informationHardware Solution for Windows
Hardware Solution for Windows Turn-Tilt Fittings Style 180 Turn-Tilt Fittings Standard Turn-Tilt Fittings Heavy Duty Dual Turn-Tilt Fitting Opening Restrictor Wilh. Schlechtendahl & Söhne GmbH & Co. KG
More informationGOLDWIND S48/ kW Industrial Wind Turbine (50Hz) World Wide Shipping. Immediate Availability. Installation Services.
750kW Industrial Wind Turbine (50Hz) Includes: Tower, Nacelle, Hub, Rotor, Blades and Controller Complete systems starting from only $410,000.00 - FOB Technical Specifications: Rated Power:750kW Rotor
More informationACCESS SOLUTIONS. NEW PRODUCTS OVER
OVER 250 NEW PRODUCTS ACCESS SOLUTIONS Search our range of over 2000 RoHS and REACH compliant parts, and find your industry solution across cabinet manufacturing, machine building, power generators, HVAC,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17021-1:2015 to provide health and safety management systems certification BSI Kitemark Court Davy Avenue Knowlhill Milton Keynes
More informationPush-Buttons and Visual indicators. Catalogue PD0C00018UK02-ev
Push-Buttons and Visual indicators Catalogue PD0C00018UK02-ev WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL
More informationseam p. 46 Standard blister hooks. Standard back bars. Standard brackets in stainless steel.
p. 46 seam 3 Standard blister hooks. 2 Standard back bars. 4 Standard brackets in stainless steel. This side hanging frame is made to order: a round tube with 25 mm diameter firmly welded with the brackets.
More informationEDC DRY CLAW VACUUM PUMPS
edwardsvacuum.com EDC DRY CLAW VACUUM PUMPS INNOVATION AND RELIABILITY Edwards EDC range is a new generation of robust single stage dry claw vacuum pumps The new range of our EDC dry claw pumps features
More informationPerformance Through Innovation
World Leading Lifting Accessories Supplier for Bulk & Container Handling Performance Through Innovation INTRODUCTION TO RAM SPREADERS RAM Spreaders ancestral roots began back in 1876 as Ed Mills & Son,
More informationClamping Handles & Adjustable Tension Levers. Leaflet No. A03.1
I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A03.1 Clamping Handles & Adjustable Tension Levers I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Who we are
More informationCARES Technical Approval Report TA1B
CARES Technical Approval Report TA1B - 5029 Issue 4 LENTON Standard, Standard Transition, Position, Position Transition, Parallel Bolt Couplers and Mechanical Anchors Assessment of the LENTON Standard,
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationpull action latch clamps
pull action latch clamps Sizing and Application Chart Click Page # View Max. Holding Capacity N [lbf.] Plunger Travel mm [inch] Series Page MC-PAL-# 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000
More informationBrakes. KNOTT Electromagnetic Release Spring-Applied Dual-Surface Fail-Safe Brakes TYPE ERA, ERB, ERC ELECTROMAGNETIC
Brakes ELECTROMAGNETIC KNOTT Electromagnetic Release Spring-Applied Dual-Surface Fail-Safe Brakes TYPE ERA, ERB, ERC www.knott.de We make your brake 1 KNOTT manufacture a wide range of electromagnetic
More informationCARES Technical Approval Report TA1C
CARES Technical Approval Report TA1C - 5057 Issue 1 LENTON Standard, Position, Parallel Bolt Couplers and Mechanical Anchor Assessment of the LENTON Standard, Standard Transition, Position, Parallel Bolt
More informationRotary Medium Stylized wing 1.6 (.06) 1.3 (.05) 19 (.73) 48 (1.89) 1.6 (.06) 1.3 (.05) 18 (.71) 47 (1.85)
K Draw Latch Rotary Medium Stylized wing 1.6 (.06) 6.4 (.5) 9 (1.13) Stainless steel or steel, black powder coated Performance Details Steel: Max. working load: 130 N (75 lbf) Stainless steel: Max. working
More informationWebasto Service 360. The best approach to an optimal solution is all-round.
Webasto Service 360 The best approach to an optimal solution is all-round. A new approach to Service. Webasto is present with over 50 locations around the world. Our roof and convertible roof as well as
More informationSYSTEM 180 AS 90. > The loader specialist. > Swing Shovel Loader m 3
> The loader specialist > Swing Shovel Loader 0.9 1.4 m 3 Let s have a look Tipping loads with standard bucket Working area with 4-in-1 bucket 53.5 kw / 73 hp at 2500 min -1 3.240 kg 100% 80 100% max.
More informationPull Action Latch Clamps
5.1 Pull Action Latch Clamps Max. Holding Capacity N[lbf.] Drawing Movement mm [inch] Series Section.Page 0 to 2000 [0 to 450] 2000 to 4000 [450 to 900] 4000 to 6000 [900 to 1350] 6000 to 10000 [1350 to
More informationTest Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy
Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized
More informationNew! NiroTherm. Premium solution for corrosive environments. exclusively from SANHA
NiroTherm New! = Tool Compatibility + Push & Stay + Leak Path Feature exclusively from SANHA Premium solution for corrosive environments Optimal for heating, cooling and compressed air installations high
More informationContents TRANSOM CLOSER 690 SERIES 23 LOCK OF GLASS DOOR 800 SERIES 24 AUTO HINGE 820 SERIES 25 PANIC EXIT DEVICE 910 SERIES 26
www.usaf.com.tw Contents ELECTRIC STRIKE 100 SERIES 1 E-SAVE SLIDER 171 SERIES 2 SHOWER HINGE 230 SERIES 3 SHOWER HINGE 240 SERIES 4 FREE HINGE 20 SERIES GLASS CONNECTOR 280 SERIES 6 PVC GASKET 290 SERIES
More informationmirage standard and Qr concealed pendent sprinkler vk462 and hp sprinkler vk463 (K5.6)
Page 1 of 7 1. DESCRIPTION Viking Mirage Standard and Quick Response Concealed Pendent VK462 and HP VK463 are thermosensitive glass-bulb spray sprinklers designed for installation on concealed pipe systems
More informationAdvanced bearing technologies & value-added services
Advanced bearing technologies & value-added services A forward-thinking bearing manufacturer NTN Bearing Corporation of America is a leading manufacturer of anti-friction bearings and constant velocity
More informationMOBILE PURE AIR DUST EXTRACTORS AL-KO POWER UNIT
MOBILE PURE AIR DUST EXTRACTORS AL-KO POWER UNIT YOUR ASSET AT WORK. MADE IN GERMANY A REAL ASSET AT WORK AL-KO POWER UNIT M AL-KO PURE AIR DUST EXTRACTORS Mobile extraction devices from AL-KO combine
More informationHoists & Winches. :: Electric Chain Hoists 26 :: Manual Hoists 30 :: Pneumatic Hoists 31 :: Winches 32 :: Beam Trolleys 34
Hoists & Winches Lifting & Handling Equipment :: Electric Chain Hoists 26 :: Manual Hoists 30 :: Pneumatic Hoists 31 :: Winches 32 :: Beam Trolleys 34 Electric Chain Hoists Compact Electric Chain Hoists
More informationNo.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
More informationINDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY RANGE OF ACCESSORIES COMPETENCE CENTRE INDUSTRIAL VACUUMING. Valid from
INDUSTRIAL VACUUM SYSTEMS MADE AND MANUFACTURED IN GERMANY Valid from 01.01.2019 COMPETENCE CENTRE INDUSTRIAL VACUUMING 2 3 DEAR CUSTOMER, This catalogue provides you with an essential selection of the
More informationTRAILER PASSPORT. instruction manual maintenance warranty
TRAILER PASSPORT instruction manual maintenance warranty trailer model article no. vehicle identity number initial registration date of transfer name and signature of your respo representative 1 Congratulations!
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 2009 (changes and errors expected) GLOBAL STANDD Rugged Environment COOLING SYSTEMS Product Information AKG CooL-Line is a standard line of products from the market leader in high
More informationMechanical Entrance Locksets
Mechanical Entrance Locksets We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Nexion Mechanical Velocity Entrance Locksets Entrance Locksets
More informationGLOBAL STANDARD COOLER
GLOBAL STANDD COOLER AKG 2009 (changes and errors expected) GLOBAL STANDD RUGGED ENVIRONMENT COOLING SYSTEMS PRODUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader in high
More informationDORMA BTS 80 F -EMB -FLB
Floor springs DORMA BTS 80 F -EMB -FLB DORMA BTS 80 F - EMB - FLB Floor springs Floor springs designed especially for fire and smoke doors. Wide range of functions, quality assured. CERTIFIRE approved
More informationIndustrIal ValVes Product overview
Industrial Valves Product Overview AS-Schneider At Engineering Know-how AS-Schneider with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation and Double Block & Bleed
More informationHPL Tubes. Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines
HPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines 2 HPL Tubes Hydraulic-pneumatic pressure lines Mannesmann Precision Tubes As a leading European manufacturer of cold-drawn
More informationDATA PD VB... Air Reservoirs. Product. Function. Technical Features. Range Overview - mounting straps for steel and aluminium reservoirs
Commercial Vehicle Systems Product DATA Doc. No. Y095687 (EN Rev. 004) February 16 PD50 Function are used to store the compressed air for the vehicle air braking, suspension and auxiliary systems. They
More informationCover Sheet for Supplier Information of. Broetje-Automation Group
1. Cover Sheet Cover Sheet for Supplier Information of Broetje-Automation Group Within the scope of DIN EN 9100, we as Broetje-Automation Group are required to check the performance of our suppliers and
More informationstyle vision & passenger restraint latches passenger restraint latches section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS Safety Notice: The products shown in Section of our catalog are the
More informationDSV. Operating Manual. Double Seal Butterfly Valve. Read and understand this manual prior to operating or servicing this product.
Operating Manual DSV Double Seal Butterfly Valve Read and understand this manual prior to operating or servicing this product. www.sks-online.com UK DSV-UK2.qxp / 10.2005 Table of Contents: Page: 1.
More informationpanasonic.net/id/pidsx/global Solve issues related to machine safety and other safety measures with a safety door switch with key!
655 Door with Key SERIES Related Information General terms and conditions... F-7 General precautions... P.50 PHOTO PHOTO Conforming to Machine & EMC Directives Recognition Certified MEASURE ITY panasonic.net/id/pidsx/global
More informationstyle vision & paddle latches paddle latches section section INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS
paddle latches vision & style paddle latches INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 1 paddle latches No. 4000 No. 4000 Mini
More informationHawker industrial batteries for rail applications: Energy solutions with system. evo rail batteries. perfect rail batteries. Ni-Cd rail batteries
Hawker industrial batteries for rail applications: Energy solutions with system evo rail batteries perfect rail batteries Ni-Cd rail batteries powerbloc batteries System solutions for worldwide applications
More informationSE SE seam. aluline. p. 51. seam35 wall installation rail. L 6100 cut to size SE SE L 6100 cut to size
SEAM 35 BRIGHT aluline primo seam stepless ipuc opuc xpuc p. 5 extent seam35 rails SE 035 20 05 seam35 wall installation rail slot width 3.50 mm for one bracket L 600 SE 035 20 05 SE 035 2 05 aluminium,
More informationRimlocks. ASSA ABLOY, the global leader in door opening solutions
ASSA ABLOY, the global leader in door opening solutions Contents Introduction 1 001 Double Cylinder Deadlatch 2-3 001 Double Cylinder Deadlatch with Lever 4-5 002 Single Cylinder Deadlatch 6-7 002 Single
More informationOverview of the main fittings
Overview of the main fittings Index 4 Company 6 The Hinges 7 Slide-on hinges 8 Anyway clip hinges 9 The plates 10 Harmony, the soft closing hinge 12 Door dampers 14 Magic touch latches 16 Wing lift-up
More informationOFFLINE SERIES GLOBAL STANDARD COOLER
OFFLINE SERIES GLOBAL STANDARD COOLER OIL-TO-AIR COOLING SYSTEMS WITH AC-MOTOR AND PUMP Product information AKG-Line is a standard line of products from the market leader in high performance aluminium
More informationExpertise. Hydraulics. What you should know about us. excellent pressure solutions
Expertise Hydraulics What you should know about us excellent pressure solutions Welcome to Roth Hydraulics We develop and produce custom designed products and systems for fluid technology. Our core products
More informationWorking Instructions Translation
WIDOS Einsteinstr. 5 Phone +49 (0) 71 52 99 39-0 W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen Fax +49 (0) 71 52 99 39-40 Website: www.widos.de Email: info@widos.de Working Instructions Translation
More information