EP3 Troubleshooting Guide

Transcription

1 EP Troubleshooting Guide

2 PULLCORD ADDON CARD FLASHER ADDON CARD HEATER ADDON CARD

3 Index Circuit Page Dome Lights Reading Lights Destination Sign Heater Add-on Card Entry Door Interlock Window Ajar Power Distribution Flasher Add-on Card Stop Request Add-on Card Buzzer Fuse Legend LED Indicators 0 0

4 Dome Light Circuit Requires ground input on J pin (0a K) Requires power input on J pin (0 P) Enables power output on J pin & J pin. Special options include dome light relay that controls left reading light and right reading light relays. This function is for large load fluorescent lights that exceed the normal amp function but still allows entry door open to enable the interior lights. When Jumper is placed in J then you can have separate switches in dash for extra lights controlled by the entry door or split load for curb or road side lights controlled by the entry door. If special option for extra lights are used then input on J pin and/or pin will activate the outputs on J pin and J pin. If special option for fluorescent lights is used then normal entry door open signal will operate J pin and J pin.

5 +V BATTERY FT 0A S00-DOME RL F0 A POWER OUTPUT (0 B) POWER OUTPUT (0 K) J OPTIONAL F A F0 A GROUND INPUT (0a K) POWER INPUT (0 P) DOME GROUND INPUT (0a I) GROUND INPUT (0a B) DCON 0 RRDLT D0 POWER OUTPUT (0 K) J JP D0 LRDT POWER OUTPUT (0 I) J NEXT ASSEMBLY: SUPERCEDES: DO NOT SCALE DRAWING DRAWN: DATE: DRAWING INFORMATION CKD: SIZE: A JOH ElDorado National a THOR company TITLE: DOME LIGHT SCHEMATIC, EP B WALL STREET SALINA, KS 0 MARK PART NUMBER AND REVISION ON ALL PARTS THIS DRAWING IS THE PROPERTY OF ELDORADO NATIONAL COMPANY, A THOR INDUSTRIES COMPANY AND IS NOT TO BE DUPLICATED OR USED IN ANY WAY DETRIMENTAL TO THEIR BEST INTEREST. REV. 0/0 SCALE: NTS FRACTIONAL: DECIMALS: ANGULAR: WGT: TOLERANCE UNLESS SPECIFIED ± / 0.00 ± DEG. - REV. JWW BY DATE RELEASED TO PRODUCTION DESCRIPTION RELEASE # MATERIAL SPEC: PART NUMBER: PAGE: OF S00-DOME

6 Reading Lights Circuit Requires power input on J pin (0 P). Requires ground input on J pin (0a I) for road side. Will activate power output on J pin (0 I). Requires power input on J pin (0 P). Requires ground input on J pin (0a B) for curb side. Will activate power output on J pin (0 B). Special option inputs (see Dome Light Circuit for details).

7 +V BATTERY FT 0A S00-READING RL J POWER OUTPUT (0 B) F A F0 A POWER INPUT (0 P) GROUND INPUT (0a I) GROUND INPUT (0a B) 0 RRDLT LRDT J POWER OUTPUT (0 I) NEXT ASSEMBLY: SUPERCEDES: DO NOT SCALE DRAWING DRAWN: DATE: DRAWING INFORMATION CKD: SIZE: A JOH ElDorado National a THOR company TITLE: READING LIGHTS SCHEMATIC, EP B WALL STREET SALINA, KS 0 MARK PART NUMBER AND REVISION ON ALL PARTS THIS DRAWING IS THE PROPERTY OF ELDORADO NATIONAL COMPANY, A THOR INDUSTRIES COMPANY AND IS NOT TO BE DUPLICATED OR USED IN ANY WAY DETRIMENTAL TO THEIR BEST INTEREST. REV. 0/0 SCALE: NTS FRACTIONAL: DECIMALS: ANGULAR: WGT: TOLERANCE UNLESS SPECIFIED ± / 0.00 ± DEG. - REV. JWW BY DATE RELEASED TO PRODUCTION DESCRIPTION RELEASE # MATERIAL SPEC: PART NUMBER: PAGE: OF S00-READING

8 Destination Sign Circuit Requires power input on J pin (0 P). Requires power input on J pin (0 N). Will activate power output on J pin (0 N) and J pin (0 E). Relay outputs are used for: Front marker lights () Fair box light Driver dash switch panel backlighting

9 +V BATTERY FT 0A S00-DEST RL J F0 A POWER INPUT (0 P) POWER INPUT (0 N) DEST 0 POWER OUTPUT ( E) J J POWER OUTPUT (0 E) POWER OUTPUT (0 N) NEXT ASSEMBLY: SUPERCEDES: DO NOT SCALE DRAWING DRAWN: DATE: DRAWING INFORMATION CKD: SIZE: A JOH ElDorado National a THOR company TITLE: B WALL STREET SALINA, KS 0 DESTINATION SIGN SCHEMATIC, EP MARK PART NUMBER AND REVISION ON ALL PARTS THIS DRAWING IS THE PROPERTY OF ELDORADO NATIONAL COMPANY, A THOR INDUSTRIES COMPANY AND IS NOT TO BE DUPLICATED OR USED IN ANY WAY DETRIMENTAL TO THEIR BEST INTEREST. REV. 0/0 SCALE: NTS FRACTIONAL: DECIMALS: ANGULAR: WGT: TOLERANCE UNLESS SPECIFIED ± / 0.00 ± DEG. - REV. JWW BY DATE RELEASED TO PRODUCTION DESCRIPTION RELEASE # MATERIAL SPEC: PART NUMBER: PAGE: OF S00-DEST

10 Heater Circuit Requires power input on J pin (0 P). Requires ground input on HJ pin (0a P). Will activate power output on HJ pin (0 P). Will activate power output on HJ pin (BOOSTER PUMP). Requires power input on J pin (0 P). Requires ground input on HJ pin (0a O). Will activate power output on HJ pin (0 O). Will activate power output on HJ pin (BOOSTER PUMP). Requires power input on J pin (0 P). Requires ground input on HJ pin (0a P). Will activate power output on HJ pin (0 P). Will activate power output on HJ pin (BOOSTER PUMP). Requires power input on J pin (0 P). Requires ground input on HJ pin (0a O). Will activate power output on HJ pin (0 O). Will activate power output on HJ pin (BOOSTER PUMP). 0

11 +V BATTERY FT 0A S00-HEAT RL J F0 A D0 F0 A HR D0 D0 POWER INPUT (0 P) HR D0 0 HR POWER OUTPUT (0 P) HJ HR POWER OUTPUT (0 O) POWER OUTPUT (0 O) POWER OUTPUT (PUMP) POWER OUTPUT (0 P) HR GROUND INPUT (0a P) HJ GROUND INPUT (0a O) GROUND INPUT (0a P) GROUND INPUT (0a O) NEXT ASSEMBLY: SUPERCEDES: DO NOT SCALE DRAWING DRAWN: DATE: DRAWING INFORMATION CKD: SIZE: A JOH ElDorado National a THOR company TITLE: HEATER SCHEMATIC, EP B WALL STREET SALINA, KS 0 MARK PART NUMBER AND REVISION ON ALL PARTS THIS DRAWING IS THE PROPERTY OF ELDORADO NATIONAL COMPANY, A THOR INDUSTRIES COMPANY AND IS NOT TO BE DUPLICATED OR USED IN ANY WAY DETRIMENTAL TO THEIR BEST INTEREST. REV. 0/0 SCALE: NTS FRACTIONAL: DECIMALS: ANGULAR: WGT: TOLERANCE UNLESS SPECIFIED ± / 0.00 ± DEG. - REV. JWW BY DATE RELEASED TO PRODUCTION DESCRIPTION RELEASE # MATERIAL SPEC: PART NUMBER: PAGE: OF S00-HEAT

12 Entry Door Interlock Circuit Requires power input on J pin (0 P). Requires ground input on J pin (0 O). Will activate power output on J pin (0 I). To do a battery hot or ignition hot entry door, (0 I) pin will need to be removed from J and connected to available battery or ignition power. This will allow the entry door to work in any transmission gear. Important note: This bypass will prevent the engine from high idle unless the transmission is shifted into park.

13 +V BATTERY FT 0A F A S00-ENTRY RL J F A POWER INPUT (0 P) GROUND INPUT (0 O) ENTRY 0 POWER OUTPUT (0 I) J NEXT ASSEMBLY: SUPERCEDES: DO NOT SCALE DRAWING MARK PART NUMBER AND REVISION ON ALL PARTS THIS DRAWING IS THE PROPERTY OF ELDORADO NATIONAL COMPANY, A THOR INDUSTRIES COMPANY AND IS NOT TO BE DUPLICATED OR USED IN ANY WAY DETRIMENTAL TO THEIR BEST INTEREST. REV. 0/0 DRAWN: DATE: DRAWING INFORMATION SCALE: NTS FRACTIONAL: DECIMALS: ANGULAR: CKD: SIZE: WGT: TOLERANCE UNLESS SPECIFIED A ± / 0.00 ± DEG. JOH - REV. JWW BY DATE RELEASED TO PRODUCTION DESCRIPTION RELEASE # ElDorado National a THOR company TITLE: MATERIAL SPEC: PART NUMBER: B WALL STREET SALINA, KS 0 ENTRY DOOR INTERLOCK SCHEMATIC EP S00-ENTRY PAGE: OF

14 Window Ajar Circuit Requires power input on J pin (0 P). Requires ground input on J pin ( Y). Will activate ground output on J pin ( I). Optional Buzzer: Inserting a fuse into Jumper will enable a buzzer anytime the window is ajar.

15 +V BATTERY FT 0A S00-WINAJ RL J GROUND INPUT ( Y) J F0 A WINAJ D JP POWER INPUT (0 P) 0 Buzzer OPTIONAL J GROUND OUTPUT ( I) NEXT ASSEMBLY: SUPERCEDES: DO NOT SCALE DRAWING DRAWN: DATE: DRAWING INFORMATION CKD: SIZE: A JOH ElDorado National a THOR company TITLE: WINDOW AJAR SCHEMATIC, EP B WALL STREET SALINA, KS 0 MARK PART NUMBER AND REVISION ON ALL PARTS THIS DRAWING IS THE PROPERTY OF ELDORADO NATIONAL COMPANY, A THOR INDUSTRIES COMPANY AND IS NOT TO BE DUPLICATED OR USED IN ANY WAY DETRIMENTAL TO THEIR BEST INTEREST. REV. 0/0 SCALE: NTS FRACTIONAL: DECIMALS: ANGULAR: WGT: TOLERANCE UNLESS SPECIFIED ± / 0.00 ± DEG. - REV. JWW BY DATE RELEASED TO PRODUCTION DESCRIPTION RELEASE # MATERIAL SPEC: PART NUMBER: PAGE: OF S00-WINAJ

16 Power Distribution Circuit Requires power input on J pin (0 P). This is the oem key on ignition. Requires primary +v battery cable. Requires primary -v battery cable. Will enable all fuses except F, F, F, F and F. All fuses except F, F, F, F and F go through FT. Fuses F, F, F, F and F are battery hot. All fuses contain a red led for fuse blown function.

17 BATTERY POWER OUTPUT (0 R) BATTERY POWER OUTPUT ( R) SPARE BATTERY POWER OUTPUT SPARE BATTERY POWER OUTPUT SPARE BATTERY POWER OUTPUT J F F F F F A A A A A FT 0A +V BATTERY J S00-MASTER IGNITION POWER OUTPUT ( P) IGNITION POWER OUTPUT (0 W/B) IGNITION POWER OUTPUT (0 T) J F0 F0 F A A A MASTER IGNITION POWER INPUT (0 P) IGNITION POWER OUTPUT (0 I) IGNITION POWER OUTPUT (0 R) F A SPARE IGNITION POWER OUTPUT SPARE IGNITION POWER OUTPUT IGNITION POWER OUTPUT ( W) IGNITION POWER OUTPUT ( P) IGNITION POWER OUTPUT ( I) IGNITION POWER OUTPUT ( R) J F F0 F0 F F F0 A A A A A A 0 NEXT ASSEMBLY: SUPERCEDES: DO NOT SCALE DRAWING DRAWN: DATE: DRAWING INFORMATION CKD: SIZE: A JOH ElDorado National a THOR company TITLE: B WALL STREET SALINA, KS 0 POWER DISTRIBUTION SCHEMATIC, EP MARK PART NUMBER AND REVISION ON ALL PARTS THIS DRAWING IS THE PROPERTY OF ELDORADO NATIONAL COMPANY, A THOR INDUSTRIES COMPANY AND IS NOT TO BE DUPLICATED OR USED IN ANY WAY DETRIMENTAL TO THEIR BEST INTEREST. REV. 0/0 SCALE: NTS FRACTIONAL: DECIMALS: ANGULAR: WGT: TOLERANCE UNLESS SPECIFIED ± / 0.00 ± DEG. - REV. JWW BY DATE RELEASED TO PRODUCTION DESCRIPTION RELEASE # MATERIAL SPEC: PART NUMBER: PAGE: OF S00-MASTER

18 Flasher Circuit Requires one of the following inputs: FJ pin (0 P) power input. FJ pin (0 O) ground input. Requires JMP to have a fuse installed. FJ pin (a O) ground input. Requires JMP to have a fuse installed. Mounting Screw B power input. Requires JMP to have a fuse installed. Will activate the following outputs: FJ pin ( Y) & pin ( O) power output. Requires JMP to have a fuse installed. FJ pin ( Y) & FJ pin ( R) power output. Requires JMP to have a fuse installed.

19 S00-FLASHER ADDON FLASHER CARD POWER OUTPUT ( Y) GROUND INPUT (0 O) FJ JP JP B ENTRY DOOR OPEN FLASH INPUT (+ V) GROUND INPUT (a O) POWER OUTPUT ( O) JP POWER OUTPUT ( Y) POWER OUTPUT ( R) FLASHER A GROUND JP FLASHER CARD POWER C +V BATTERY FT 0A J RL POWER INPUT (0 P) F A NEXT ASSEMBLY: SUPERCEDES: DO NOT SCALE DRAWING DRAWN: DATE: DRAWING INFORMATION CKD: SIZE: A JOH 0 ElDorado National a THOR company TITLE: FLASHER SCHEMATIC, EP B WALL STREET SALINA, KS 0 MARK PART NUMBER AND REVISION ON ALL PARTS THIS DRAWING IS THE PROPERTY OF ELDORADO NATIONAL COMPANY, A THOR INDUSTRIES COMPANY AND IS NOT TO BE DUPLICATED OR USED IN ANY WAY DETRIMENTAL TO THEIR BEST INTEREST. REV. 0/0 SCALE: NTS FRACTIONAL: DECIMALS: ANGULAR: WGT: TOLERANCE UNLESS SPECIFIED ± / 0.00 ± DEG. - REV. JWW BY DATE RELEASED TO PRODUCTION DESCRIPTION RELEASE # MATERIAL SPEC: PART NUMBER: PAGE: OF S00-FLASHER

20 Stop Request Circuit Requires one of the following inputs: FJ pin (0 P) power input. JS pin ( O) ground input. Will activate a dual tone chime on JS pin and JS pin (speaker out). Will activate JS pin ground output for dash ADA request light. Will activate JS pin ground output for overhead stop request light. Will reset with JS pin ground input from entry door. Will reset with optional driver switch in dash using JS pin wire to ground. JS pin ( I) ground input. Will activate a single tone chime on JS pin and JS pin (speaker out). Will activate JS pin ground output for dash ADA request light. Will activate JS pin ground output for overhead stop request light. Will reset with JS pin ground input from entry door. Will reset with optional driver switch in dash using JS pin wire to ground. Mounting screw J uses ignition power input. Mounting screws K & L are ground inputs. 0

21 STOP REQUEST ADD-ON CARD S00-STOPREQ GROUND INPUT ( O) GROUND INPUT (0 K) GROUND INPUT ( I) JS RESET IGNITION INPUT GROUND INPUT GROUND INPUT J K L GROUND OUTPUT (K) POWER OUTPUT (R) GROUND OUTPUT ( P) GROUND OUTPUT ( B) GROUND OUTPUT (0 I) SPEAKER OUT SPEAKER OUT +V BATTERY FT 0 J RL POWER INPUT (0 P) F0 A 0 NEXT ASSEMBLY: SUPERCEDES: DO NOT SCALE DRAWING DRAWN: DATE: DRAWING INFORMATION CKD: SIZE: A JOH ElDorado National a THOR company TITLE: STOP REQUEST SCHEMATIC, EP B WALL STREET SALINA, KS 0 MARK PART NUMBER AND REVISION ON ALL PARTS THIS DRAWING IS THE PROPERTY OF ELDORADO NATIONAL COMPANY, A THOR INDUSTRIES COMPANY AND IS NOT TO BE DUPLICATED OR USED IN ANY WAY DETRIMENTAL TO THEIR BEST INTEREST. REV. 0/0 SCALE: NTS FRACTIONAL: DECIMALS: ANGULAR: WGT: TOLERANCE UNLESS SPECIFIED ± / 0.00 ± DEG. - REV. JWW BY DATE RELEASED TO PRODUCTION DESCRIPTION RELEASE # MATERIAL SPEC: PART NUMBER: PAGE: OF S00-STOPREQ

22 Buzzer Circuit Requires the following input: FJ pin (0 P) power input. Requires one of the following inputs: J PIN 0 (AUX) ground input. Requires JMP. J pin ( Y) ground input. Requires JMP. Flasher add-on card (FJ pin 0 O) ground input. Requires JMP. Requires J pin (0 O) transmission park ground input. J pin (0 E) ground input. Requires JMP. Requires J pin (0 O) transmission park ground input.

23 +V BATTERY FT 0A MASTER S00-BUZZER F0 A PBUZZ GROUND INPUT FROM FLASHER ADD-ON CARD (0 O) D D JP Buzzer + - J JP D D JP JP D POWER INPUT (0 P) GROUND INPUT (0 O) 0 GROUND INPUT (AUX) GROUND INPUT (0 E) WINAJ GROUND OUTPUT (0A E) J 0 NEXT ASSEMBLY: SUPERCEDES: DO NOT SCALE DRAWING DRAWN: DATE: DRAWING INFORMATION CKD: SIZE: A JOH GROUND INTPUT ( Y) ElDorado National a THOR company TITLE: BUZZER SCHEMATIC, EP B WALL STREET SALINA, KS 0 MARK PART NUMBER AND REVISION ON ALL PARTS THIS DRAWING IS THE PROPERTY OF ELDORADO NATIONAL COMPANY, A THOR INDUSTRIES COMPANY AND IS NOT TO BE DUPLICATED OR USED IN ANY WAY DETRIMENTAL TO THEIR BEST INTEREST. REV. 0/0 SCALE: NTS FRACTIONAL: DECIMALS: ANGULAR: WGT: TOLERANCE UNLESS SPECIFIED ± / 0.00 ± DEG. - REV. JWW BY DATE RELEASED TO PRODUCTION DESCRIPTION RELEASE # MATERIAL SPEC: PART NUMBER: PAGE: OF S00-BUZZER

24 Fuse Legend Fuse Description Fuse Description 0 Window Ajar / Stop Request Overhead Light Driver Fan 0 Entry Door Controlled Lighting Driver Switch Panel Ignition Source 0 Audio Systems Ignition (except radio) Luggage Light / Exit Lights 0 Passenger Pull Cord / Wheelchair Pull Cord System Left Reading Lights 0 Right Reading Lights Entry Door Battery Source 0 Air Conditioning Dash Switch Entry Door Interlock Relay (Controls Open / Close Signals) 0 Midbody Heater Drop Audio Systems Battery Source 0 Interior Passenger Dome Lights 0 Spare Ignition Fuse 0 Rear Heater Drop Spare Ignition Fuse 0 Destination Sign / Front Marker Lights / Driver Dash Switch Backlighting / Fare Box (Marker Light enable only) Spare Battery Fuse Aux Power Output / Flasher Add-on Card Power Spare Battery Fuse Destination Sign / Aux Radio Drop Spare Battery Fuse

25 LED Indicators Application Component Label Amber LED Green LED Red LED Main EP Panel DEST ENTRY LRDT J Pin power trigger J Pin ground trigger J Pin ground trigger Fuse 0 Fuse Fuse DOME J Pin power trigger Fuse RRDLT J Pin ground trigger Fuse PBUZZ J Pin ground trigger WINAJ J Pin ground trigger Stop Request Add-on Card ADA BOTH PASS Relay trigger from Chip Relay trigger from Chip Relay trigger from Chip JS Pin ground input JS Pin ground input CANCEL JS Pin ground input POWER Fuse Fuse Heater Add-on Card HR HR HR HJ Pin ground input HJ Pin ground input Fuse Fuse Fuse HR HJ Pin ground input Fuse HR HJ Pin ground input Fuse Flasher Add-on Card FLASH POWER O Fuse Chip Output Fuse Y R