PRESSURE GAUGE WITH ALARM CONTACT, FILLED (TRANSPARENT HOOD TYPE)

Transcription

1 T +6 (4) F +6 (4) Rm. 103-A, No. 67, T +6 (21) F +6 (21) PRESSURE GAUGE WITH ALARM CONTACT, FILLED (TRANSPARENT HOOD TYPE) SPECIFICATIONS Electrical alarm contacts make or break an electric control circuit depending on the posion of the instrument's pointer. Points of contact actuaon are adjustable over the full extension of the scale graduaon. The gauges feature a hub in the window for an adjustment key. Contact actuaon is made when there is an upper or lower deviaon of the set desired value by the instrument pointer. 1 GENERAL CHARACTERISTICS TECHNICAL FEATURES NOMINAL DIAMETERS (mm) CALIBRATION PRESSURE (PC) AMBIENT TEMPERATURE 100 (DN100) Refer to Order Specicaons C ACCURACY ALARM CONTACTS CASE ±1,0% F.S. Accuracy Non-Adjustable Contacts Fully Welded Stainless Steel with Antampering Sealing: AISI 304 Filled with Silicone Oil -On Air with Magnec Block (0%Ag-20%Ni, 10m Gold-Plated) -Maximum Contact Rang with Non-Inducve Ohmic Load, Filled: 30W / 50VA, Maximum 1A -Contact Available: Up to 3 Snap Acon Non Inducve Contacts POINTER WINDOW PROTECTION DEGREE Black Aluminum Transparent PC Lens IP 65 as per EN / IEC 529 RING MOVEMENT STORAGE TEMPERATURE Bayonet Lock, Stainless Steel AISI 430 from C Chrome-Plated Steel Germany with Antampering Sealing RANGES DIAL PROCESS CONNECTION Vacuum & Compound, White Aluminum with Black Fully Welded Stainless Steel AISI 316 up to 1000 kg Markings and Colors Sectors M20 x 1,5 as per Customer s G½ B Thread (EN 37), SW22, 1/2 PT Specicaon ELECTRICAL CONNECTION WEIGHT BOURDON TUBE Juncon Box with Cable Gland 1.2 KG Stainless Steel AISI 316 from Germany M20 x 1,5 (2,5 mm²)

2 T +6 (4) F +6 (4) Rm. 103-A, No. 67, T +6 (21) F +6 (21) PRESSURE GAUGE WITH ALARM CONTACT, FILLED (TRANSPARENT HOOD TYPE) OPTIONS & ACCESSORIES Juncon Box on the Le Contact Adjustment Adjustable Removable Juncon Box DIMENSIONS (MM) 2 Oponal Removable Juncon Box DIMENSIONS (MM) b e Single/Double Contacts with Isolang Layers Triple Contacts with Isolang Layers POWER RATINGS: MAXIMUM CONTACT RATING MAXIMUM CONTACT RATING WITH NON INDUCTIVE (OHMIC LOAD) GAS FILLED GAUGES LIQUID FILLED GAUGES Maximum Voltage (MSR) Ue 250 V 250 V Current Rangs: Make Rang: 1,0 A 1,0 A Break Rang: 1,0 A 1,0 A Connuous Load 0,6 A 0,6 A Maximum Load 30 W 50 VA 20 W 20 VA RECOMMENDED CONTACT RATINGS VOLTAGE (DIN IEC 3) DC / AC GAS FILLED GAUGES LIQUID FILLED GAUGES Ohmic Load Inducve Load cos>0,7 Ohmic Load Inducve Load cos>0,7 V Note: Please refer to the user s manual for detailed maximum power rangs and recommendaons.

3 T +6 (4) F +6 (4) Rm. 103-A, No. 67, T +6 (21) F +6 (21) PRESSURE GAUGE WITH ALARM CONTACT, FILLED SPECIFICATIONS Electrical alarm contacts make or break an electric control circuit depending on the posion of the instrument's pointer. Points of contact actuaon are adjustable over the full extension of the scale graduaon. The gauges feature a hub in the window for an adjustment key. Contact actuaon is made when there is an upper or lower deviaon of the set desired value by the instrument pointer. 3 GENERAL CHARACTERISTICS TECHNICAL FEATURES NOMINAL DIAMETERS (mm) CALIBRATION PRESSURE (PC) AMBIENT TEMPERATURE 100 (DN100) Refer to Order Specicaons C ACCURACY ALARM CONTACTS CASE ±1,0% F.S. Accuracy Non-Adjustable Contacts Fully Welded Stainless Steel with Antampering Sealing: AISI 304 Filled with Silicone Oil -On Air with Magnec Block (0%Ag-20%Ni, 10m Gold-Plated) -Maximum Contact Rang with Non-Inducve Ohmic Load, Filled: 30W / 50VA, Maximum 1A -Contact Available: Up to 3 Snap Acon Non Inducve Contacts POINTER WINDOW PROTECTION DEGREE Black Aluminum Safety Glass IP 65 as per EN / IEC 529 RING MOVEMENT STORAGE TEMPERATURE Bayonet Lock, Stainless Steel AISI 316 from C Stainless Steel AISI 304 Germany with Antampering Sealing RANGES DIAL PROCESS CONNECTION Vacuum & Compound White Aluminum with Black Fully Welded Stainless Steel AISI 316 Gauges Markings and Colors Sectors M20 x 1,5 as per Customer s G½ B Thread (EN 37), SW22 Specicaon ELECTRICAL CONNECTION WEIGHT BOURDON TUBE Juncon Box with Cable Gland 1.2 KG Stainless Steel AISI 316 from Germany M20 x 1,5 (2,5 mm²)

4 T +6 (4) F +6 (4) Rm. 103-A, No. 67, T +6 (21) F +6 (21) PRESSURE GAUGE WITH ALARM CONTACT, FILLED OPTIONS & ACCESSORIES Juncon Box on the Le Contact Adjustment Adjustable Removable Juncon Box DIMENSIONS (MM) 4 DIMENSIONS (MM) b e Single/Double Contacts with Isolang Layers Triple Contacts with Isolang Layers POWER RATINGS: MAXIMUM CONTACT RATING MAXIMUM CONTACT RATING WITH NON INDUCTIVE (OHMIC LOAD) GAS FILLED GAUGES LIQUID FILLED GAUGES Maximum Voltage (MSR) Ue 250 V 250 V Current Rangs: Make Rang: 1,0 A 1,0 A Break Rang: 1,0 A 1,0 A Connuous Load 0,6 A 0,6 A Maximum Load 30 W 50 VA 20 W 20 VA RECOMMENDED CONTACT RATINGS VOLTAGE (DIN IEC 3) DC / AC GAS FILLED GAUGES LIQUID FILLED GAUGES Ohmic Load Inducve Load cos>0,7 Ohmic Load Inducve Load cos>0,7 V Note: Please refer to the user s manual for detailed maximum power rangs and recommendaons.

5 T +6 (4) F +6 (4) Rm. 103-A, No. 67, T +6 (21) F +6 (21) PRESSURE GAUGE WITH ALARM CONTACT, DRY (TRANSPARENT HOOD TYPE) SPECIFICATIONS Electrical alarm contacts make or break an electric control circuit depending on the posion of the instrument's pointer. Points of contact actuaon are adjustable over the full extension of the scale graduaon. The gauges feature a hub in the window for an adjustment key. Contact actuaon is made when there is an upper or lower deviaon of the set desired value by the instrument pointer. 5 GENERAL CHARACTERISTICS TECHNICAL FEATURES NOMINAL DIAMETERS (mm) CALIBRATION PRESSURE (PC) AMBIENT TEMPERATURE 100 (DN100) Refer to Order Specicaons C ACCURACY ALARM CONTACTS CASE ±1,0% F.S. Accuracy Adjustable Contacts with Chrome-Plated Steel Antampering Sealing: -On Air with Magnec Block (0%Ag-20%Ni, 10m Gold-Plated) -Maximum Contact Rang with Non-Inducve Ohmic Load, Filled: 30W / 50VA, Maximum 1A -Contact Available: Up to 4 Snap Acon Non Inducve Contacts POINTER WINDOW PROTECTION DEGREE Black Aluminum Transparent PC Lens None RING MOVEMENT STORAGE TEMPERATURE Bayonet Lock, Stainless Steel AISI 430 from C Chrome-Plated Steel Germany with Antampering Sealing RANGES DIAL PROCESS CONNECTION Vacuum, Compound, White Aluminum with Black Standard Brass 1/2" PT and upto 1000 kg Markings and Colors Sectors Oponal AISI 316 M20 x 1,5 as per Customer s G½ B Thread (EN 37), SW22, 1/2 PT Specicaon ELECTRICAL CONNECTION WEIGHT BOURDON TUBE 1.5-Meter Wiring 1.0 KG Stainless Steel AISI 316 from Germany

6 T +6 (4) F +6 (4) Rm. 103-A, No. 67, T +6 (21) F +6 (21) PRESSURE GAUGE WITH ALARM CONTACT, DRY (TRANSPARENT HOOD TYPE) OPTIONS & ACCESSORIES Juncon Box on the Le or Right Juncon Box DIMENSIONS (MM) D D1 20 D H Switch Connector 6 B B2 B1 1/2"PT S1 S2 1/2"PT D D1 D2 D3 B B1 B2 S S1 S2 S3 R G H POWER RATINGS: MAXIMUM CONTACT RATING MAXIMUM CONTACT RATING WITH NON INDUCTIVE (OHMIC LOAD) GAS FILLED GAUGES LIQUID FILLED GAUGES Maximum Voltage (MSR) Ue 250 V 250 V Current Rangs: Make Rang: 1,0 A 1,0 A Break Rang: 1,0 A 1,0 A Connuous Load 0,6 A 0,6 A Maximum Load 30 W 50 VA 20 W 20 VA RECOMMENDED CONTACT RATINGS VOLTAGE (DIN IEC 3) DC / AC GAS FILLED GAUGES LIQUID FILLED GAUGES Ohmic Load Inducve Load cos>0,7 Ohmic Load Inducve Load cos>0,7 V Note: Please refer to the user s manual for detailed maximum power rangs and recommendaons. S S S3

7 T +6 (4) F +6 (4) Rm. 103-A, No. 67, T +6 (21) F +6 (21) PRESSURE GAUGE WITH ALARM CONTACT, DRY (TRANSPARENT HOOD TYPE) SPECIFICATIONS Electrical alarm contacts make or break an electric control circuit depending on the posion of the instrument's pointer. Points of contact actuaon are adjustable over the full extension of the scale graduaon. The gauges feature a hub in the window for an adjustment key. Contact actuaon is made when there is an upper or lower deviaon of the set desired value by the instrument pointer. 7 GENERAL CHARACTERISTICS TECHNICAL FEATURES NOMINAL DIAMETERS (mm) CALIBRATION PRESSURE (PC) AMBIENT TEMPERATURE 100 (DN100) Refer to Order Specicaons C ACCURACY ALARM CONTACTS CASE ±1,0% F.S. Accuracy Adjustable Contacts with Chrome-Plated Steel Antampering Sealing: -On Air with Magnec Block (0%Ag-20%Ni, 10m Gold-Plated) -Maximum Contact Rang with Non-Inducve Ohmic Load, Filled: 30W / 50VA, Maximum 1A -Contact Available: Up to 4 Snap Acon Non Inducve Contacts POINTER WINDOW PROTECTION DEGREE Black Aluminum Transparent PC Lens None RING MOVEMENT STORAGE TEMPERATURE Bayonet Lock, Stainless Steel AISI 430 from C Chrome-Plated Steel Germany with Antampering Sealing RANGES DIAL PROCESS CONNECTION Vacuum, Compound, White Aluminum with Black Standard Brass 1/2" PT and upto 1000 kg Markings and Colors Sectors Oponal AISI 316 M20 x 1,5 as per Customer s G½ B Thread (EN 37), SW22, 1/2 PT Specicaon ELECTRICAL CONNECTION WEIGHT BOURDON TUBE 1.5-Meter Wiring 1.0 KG Stainless Steel AISI 316 from Germany

8 T +6 (4) F +6 (4) Rm. 103-A, No. 67, T +6 (21) F +6 (21) PRESSURE GAUGE WITH ALARM CONTACT, DRY (TRANSPARENT HOOD TYPE) OPTIONS & ACCESSORIES Juncon Box on the Le or Right Juncon Box DIMENSIONS (MM) 120 D D Switch Connector 1/2"PT G D2 D3 S1 S2 R B2 B1 S B D D1 D2 D3 B B1 B2 S S1 S2 S3 R G H POWER RATINGS: MAXIMUM CONTACT RATING MAXIMUM CONTACT RATING WITH NON INDUCTIVE (OHMIC LOAD) GAS FILLED GAUGES LIQUID FILLED GAUGES Maximum Voltage (MSR) Ue 250 V 250 V Current Rangs: Make Rang: 1,0 A 1,0 A Break Rang: 1,0 A 1,0 A Connuous Load 0,6 A 0,6 A Maximum Load 30 W 50 VA 20 W 20 VA RECOMMENDED CONTACT RATINGS VOLTAGE (DIN IEC 3) DC / AC GAS FILLED GAUGES LIQUID FILLED GAUGES Ohmic Load Inducve Load cos>0,7 Ohmic Load Inducve Load cos>0,7 V Note: Please refer to the user s manual for detailed maximum power rangs and recommendaons.

9 T +6 (4) F +6 (4) Rm. 103-A, No. 67, T +6 (21) F +6 (21) NON-CONTACT TYPE PRESSURE GAUGE WITH ELECTRICAL CONTACT The Non-Contact Type Electrical Contact Pressure Gauges are manufactured under new and Patent-Pending Technology for the core contact system of the gauge using the "non-contact" sensoring system as the major device to keep the switchings more smooth, accurate, quick, and thus make the life-span longer. The major benets and features of are specied below. FEATURES 9 Pressure gauge with non-contact sensor works best for the applicaons where pressure switches are necessary. Because of the benets of a combinaon of a high quality pressure gauge with Patent-Pending "non-contact" Technology, the EEPG-100 performs merely no tolerances for the pressures setup on. This is because of the integraon of a non-contact sensor built inside the quality FTB pressure gauge to minimize the tolerances for both devices. Non-Contact Sensor built inside the quality pressure gauge provides a perfect system without the concerns of the contact burning phenomenon for contact type switch. Quick operang and releasing me to meet the requirements for quick operaons from the applicaons such as rubber injecon machines. Oponal stainless steel AISI 316 Bourdon Tube or Movement to enrich the life-span of the EEPG-100. TECHNICAL DATA Contact Form: Operang Voltage: Switching Power: Switching Current: Carrying Current: Operang Time: Releasing Time Operang Temperature: Storage Temperature: SPST From B 240VAC(Max.) 50VA 0.7A DC/AC 1.5A DC/AC 1.0 Millisecond 0.2 Millisecond -40 C to +125 C -50 C to +155 C SPECIFICATIONS Size: 4" Mounng: Boom, Back Boom with Back Flange Back with Front Flange Ranges: Posive, Negave (Vacuum), and Compound Case: Stainless Steel AISI 304 Lens: Acrylic Pointer: Aluminum Tubing: Standard Brass or Oponal SS316 Movement: Standard Brass or Oponal SS316 Connecon: Standard Brass or Oponal SS316 Wiring: Fixed Cable Box Contact: High (NO), Low(NC) Control: Single or Double Contact(s) Accuracy: ±1.5% F.s. Scale: Psi, bar, kpa, MPa, kg/cm 2

10 T +6 (4) F +6 (4) Rm. 103-A, No. 67, T +6 (21) F +6 (21) NON-CONTACT TYPE PRESSURE GAUGE WITH ELECTRICAL CONTACT EEPG-100 Boom with Flange EEPG-100 Boom EEPG-100 Back with Flange 10 Model D D1 D2 D3 B B1 B2 S S1 S2 S3 R G H EEPG-100 Boom with Flange EEPG-100 Boom EEPG-100 Back with Flange