Trade Brochure & Price List 2015/16

Transcription

1 Do it once, do it right, choose Ventlite Trade Brochure & Price List 2015/16 Established in 1990 Manufacture and Wholesale of Commercial and Domestic Roof Ventilators Ventlite Roof Ventilators ABN: Unit 1/34 Bushland Ridge, WA 6163 Tel: Fax:

2 Domestic Range (300mm, 360mm) Product Features: All Aluminium, anti-corrosive construction (Australian grade 5005 H34) 2 x individually sealed and lubricated solid steel ball bearings Unique fully replaceable spindle 10 years product manufacturers warranty Built for Durability and Performance: Akulon fibreglass reinforced bearing housing 6 robust inner arms for internal bracing Attachable axial fan for increases air flow (optional) Tested to withstand speeds up to 190km/hr Tropical Cyclone category 2 rated (300mm vent) Easy Installation: Variable throat to adjust to roof pitches up to 45 degrees Large malleable flashing for easier profiling to different roofs 300mm and 360mm sized roof ventilators are consistently stocked in all Colorbond colours at our warehouse Technical Specifications and Performance 300mm 360mm Throat Size 300mm 360mm Number of Blades Steel Bearings 2 2 Shaft 10mm (aluminium) 10mm (aluminium) Outer Arm 0.9mm (aluminium) 0.9mm (aluminium) Axial Fan Blade (Optional) Variable Pitch Base (Up to 45 degrees) Area covered by one unit (based on minimum air -change) Available Yes 121m 2 140m 2 Exhaust capacity (litres per second) Cyclone Tested Yes No Approximate weight (rotor head only) 1.5kg 1.8kg Box Dimension 50cm x 50cm x 50cm 50cm x 50cm x 50cm

3 Domestic/Commercial Ventilator 410mm Product Features: All Aluminium, anti-corrosive construction (Australian grade 5005 H34) 2 x individually sealed and lubricated solid steel ball bearings Unique fully replaceable spindle 10 years product manufacturers warranty Built for Durability and Performance: Akulon fibreglass reinforced bearing housing 3 riveted 10mm aluminium internal braces 6 robust inner arms for internal bracing Attachable axial fan for increases air flow (optional) Tested to withstand speeds up to 190km/hr Tropical Cyclone category 2 rated Easy Installation: Variable throat to adjust to roof pitches up to 45 degrees Large malleable flashing for easier profiling to different roofs Technical Specifications and Performance Number of blades 28 Steel bearings 2 Shaft Axial Fan Blade (Optional) Powder Coating (Colorbond) Variable Pitch Base (up to 45 degrees) Area covered by one unit (based on minimum airchange) 10mm (aluminium) Available Available Yes 181m 2 Exhaust capacity (litres per second) 340 Approximate weight Box dimensions 3kg 50cm x 50cm x 50cm

4 Powder Coating Powder coating is available for all sized roof ventilators. Our smallest sizes, the 300mm and 360mm sized vents are all kept in stock in Colorbond colours. However our larger sizes, the 410mm, 530mm and 610mm are only powder-coated on request. We only hold our standard zincalume finish of these sizes in stock. Below are the Colorbond colours our vents are available in, we also stock and will still powder coat superseded colours such as Bushland, Headland, Plantation, Sandbank, Wilderness and Loft. Please Note: We also stock Terracotta, for the popular tile colour

5 Residential Calculation Domestic Ventilation Calculation STEP 1: CALCULATING AREA OF YOUR HOME To find the area of your home, you can either check your floor plans of your home. Or if you do not have access to these then you can simply find the length and width of the house and multiply them together. See the image to the right showing the length and width dimensions of the house. The equation below shows you how to use the figures. Area of the House = Length (m) x Width (m) AREA OF HOUSE (M 2) WIDTH (m) LENGTH (m) STEP 2: REQUIRED NUMBER OF VENTS Based on the minimum air exchange, the area covered by our ventilators are as follows: UNIVENT 300mm - 121m² UNIVENT 360mm - 140m² BIGBIRD 410mm - 181m² Therefore using the answer calculated from Step 1 you can select how many ventilators are required for your home based on the size you would like installed.

6 Industrial Range (533mm, 610mm) Product Features All aluminium, anti-corrosive construction (Australian Grade 5005 H34) Dual heavy duty bearings (10mm) Stainless steel shaft and supporting arms Nylon dust shields to protect bearings from dust and foreign particles 10 years product manufacturers warranty Available with variable pitch base or customised zincanneal base Technical Specifications and Performance 533mm 610mm Throat size 533mm 610mm Number of blades Steel bearings 2 2 Nylon dust shields 3 3 Stainless steel shaft 10mm 10mm Stainless inner arm 1.2mm 1.2mm Variable pitch base (up to 45 degrees) Square to round base (up to 18 degrees) Available Available Powder coating Available Exhaust capacity (litres per second) Approximate weight (rotor head only) 3kg 3.8kg Box dimensions (rotor head only) 62cm x 62cm x 38cm 70cm x 70cm x 45cm

7 533mm Big Bird Industrial Ventilator Features: All aluminium, anti corrosive construction (Australian grade 5005 H34 Aluminium Stainless steel shaft (10mm diameter) 2 self lubricated heavy duty steel ball bearings Streamline, low profile design Nylon dust shields to protect ball bearings Powder coating available in full Colorbond range Available with variable pitch base (up to 45 degrees) Custom made square to round base available (up to 18 degrees Performance/Exhaust Capacity Roof Height Exhaust Capacity (litres per second) 6m 575 9m 625 Approximate roof opening size: 630mm x 630 mm Air-change guide: 5 ACH: suitable for warehouses with no processes 8 ACH: suitable for factory with moderate heat producing processes and slight fumes 12 ACH: suitable for factory with high heat producing processes and fumes Guide for calculating number of 533mm vents required: 6m roof height 9m roof height Area (m 2 ) 5ACH 8ACH 12ACH 5ACH 8ACH 12ACH *Note: The above data is based on internal and external temperature differential of 12 degrees Celsius and wind speed of 12km per hour. Please refer to this data as a guide only. Contact Ventlite Roof Ventilators for further information and written quote.

8 610mm Big Bird Industrial Ventilator Features: All aluminium, anti corrosive construction (Australian grade 5005 H34 Aluminium Stainless steel shaft (10mm diameter) 2 self lubricated heavy duty steel ball bearings Streamline, low profile design Nylon dust shields to protect ball bearings Powder coating available in full Colorbond range Available with variable pitch base (up to 45 degrees) Custom made square to round base available (up to 18 degrees Performance/Exhaust Capacity Roof Height Exhaust Capacity (litres per second) 6m m 1239 Approximate roof opening size: 760mm x 760 mm Air-change guide: 5 ACH: suitable for warehouses with no processes 8 ACH: suitable for factory with moderate heat producing processes and slight fumes 12 ACH: suitable for factory with high heat producing processes and fumes Guide for calculating number of 610mm vents required: 6m roof height 9m roof height Area (m 2 ) 5ACH 8ACH 12ACH 5ACH 8ACH 12ACH

9 Commercial/Industrial Calculation Commercial Ventilation Calculation Guide With Insulation No Insulation STEP 1: From the table air changes per hour to the right, select a figure that represents the conditions of your factory/warehouse. This figure will be used in Step 3 to determine the required number of vents. Minimum heat producing processes & no fumes Moderate heat producing processes & slight fumes High heat producing processes & high fumes Factory with fumes and boilers STEP 2: VOLUME OF SHED/WAREHOUSE/FACTORY To work out the volume of the premises that requires ventilating, simply gather the measurements that are needed for the calculation. In this case we need the length, width and height all in metres. (Note: The image to the right illustrates where the measurements should be taken from) With the figures, simply enter them into the equation below. Volume (m 3 ) = length (m) x width (m) x height (m) STEP 3: REQUIRED NUMBER OF VENTS To work out the required number of vents for your building, you will need to select a figure from the table Exhaust Capacity CLS Ratings to the left. For a commercial/industrial building we recommend 410mm, 533mm and 610mm sized ventilators. Select a figure using the appropriate variables and the size of ventilator you wish to use. (Note: the bigger the vent, then the lesser the number of vents that will be required) Using this figure and the ones gathered from STEP 1 and STEP 2, input them into the equation below. Number of Vents = Volume (m 3 ) x ACH (air changes per hour) Exhaust capacity (litres per second) x 3.6 *Your answer should give you the amount of vents your building needs, try this method a couple times to work out the most suitable sized ventilator for your building

10 150mm Stainless Steel Ventilator & Turbo Fan Blade 150mm Stainless Steel Ventilator Product Features Only wind driven product in Western Australia that is guaranteed to fit a standard bathroom ventilation system (flue size 150mm) Proven to be far more effective than static ventilation in removing stale air, dampness and odours Hassle free installation - simply remove your existing flue cap and secure your new 150mm ventilator with the self-tapping screws provided. Quality construction in stainless steel Turbo Fan Blade Product Features All Aluminium, non-corrosive construction (Australian grade 5005 H34) 3 x machined pressed blades Easy DIY installation, simply attach fan to existing shaft and secure with lock nut provided Increases exhaust capacity of existing roof ventilator 10mm nylon lock nut included for attachment

11 Embermesh & Eave Vent Embermesh Product Features Prevents unwanted embers from entering ventilator and roof space 100% Stainless Steel Mesh Complies with Australian Standard 3959 DIY Installation Does not impede ventilator function Available in all ventilator sizes Eave Vent Product Features Rigid Aluminium Construction 400mm x 200mm Mesh Backing DIY installation Works in conjunction with roof ventilator to allow fresh air to be drawn into the roof space

12 10 Year Manufacturers Warranty Ventlite Roof Ventilators warrants that their products will be free of manufacturers defects in materials and workmanship for the warranty period of ten (10) years from the date of purchase. The warranty does not apply to damage due to transport, handling, installation, modification performed to the product other than Ventlite representatives, normal weathering process, or wear and tear. 10 Years