GM3. Audiovox Electronics Corp.

Transcription

1 Audiovox Electronics Corp. NSTALL GUDE FLC-DL-3 3 Available for : FLDL Rev. Date: February 0, 0 Doc. No.: ##480## 0008 please visit for complete product details The brand names and logos found in this guide are property of their respective owners. Audiovox Electronics Corp. 0 NOTCE: The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. This guide has been written for properly trained technicians; a certain level of skill & knowledge is therefore assumed. Please!review the nstallation Guide carefully before beginning any work.

2 Page of 0 FLC-DL-3 Doc. No.: ##480## 0008 install type SeLeCtiOn features Make MoDel Year nstall type relay ctrl for optonal rng Data MMoBlZer BYPaSS arm oem alarm DSarM oem alarm Door lock Door Unlock PrortY Unlock trunk/hatch release* talgate WnDoW release HeateD SeatS ctrl PUDDle lght ctrl** tachometer output Door Stat output HooD Stat output* trunk Stat output rap SHUtDoWn ctrl Mandatory: Module software version 4.3 or higher. Read Comparative nstall Type Notice (next page) for install solutions. BUck Enclave 08- or 3 Lucerne 06- or 3 cadllac chevrolet c CTS 08-0 or 3 Escallade / ESV / Hybrid 07- or 3 Escallade EXT 07- or 3 DTS 06- or 3 SRX 07-0 or 3 Avalanche 07-0 or 3 Equinox or 3 Express 08-0 or 3 mpala 06- or 3 Monte Carlo or 3 Silverado / Hybrid 07- or 3 Silverado / Hybrid 07- or 3 Premium Package Suburban 07- or 3 Tahoe / Hybrid 07- or 3 Traverse 09-0 or 3 Traverse with 09-0 or 3 Auto Up/Down Windows Acadia 07- or 3 Acadia with 07- or 3 Auto Up/Down Windows Sierra 07- or 3 Sierra Premium Package 07- or 3 Yukon / XL / Denali / Hybrid or 3 Savana 08-0 or 3 HUMMer H or 3 * f equiped ** f activated in vehicle settings

3 Page 3 of 0 FLC-DL-3 Doc. No.: ##480## 0008 install type SeLeCtiOn features Make MoDel Year nstall type relay ctrl for optonal rng Data MMoBlZer BYPaSS arm oem alarm DSarM oem alarm Door lock Door Unlock PrortY Unlock trunk/hatch release* talgate WnDoW release HeateD SeatS ctrl PUDDle lght ctrl** tachometer output Door Stat output HooD Stat output* trunk Stat output rap SHUtDoWn ctrl Mandatory: Module software version 4.3 or higher. Read Comparative nstall Type Notice (next page) for install solutions. Pontac G or 3 Torrent or 3 SatUrn Outlook 07-0 or 3 Outlook with 07-0 or 3 Auto Up/Down Windows Vue / Hybrid or 3 SUZUk XL or 3 * f equiped ** f activated in vehicle settings

4 Page 4 of 0 FLC-DL-3 Doc. No.: ##480## 0008 type 3 - warning: notice read CareFULLy MPORTANT Ground When Running from Remote Starter must be provided BEFORE gnition. Failure to comply may result in immobilizer bypass malfunction during remote start. f Ground When Running from Remote Starter CAN T be provided BEFORE gnition, use install type ONLY. - DO NOT program unlock before start on the Remote Starter. - DO NOT change Remote Starter OEM alarm control default settings. Failure to comply may result in product malfunction. install type COmParatiVe notice NSTALL TYPE : RECOMMENDED NSTALL TYPE 3: OPTONAL Uses about 7mA at rest Uses about 30mA at rest. Requires a transponder bypass ring for transponder bypass fonctions. Recommended on fleet configured vehicles and vehicles equiped with OEM remote starters. Disallows cycling key ON and OFF rapidly as it may prevent the next attempt to remote start until vehicle is started by key again. Advise vehicle owner. Heated accessories notice View compatibility chart for applicable vehicles. in all supported vehicle, heated accessories will automatically be activated 5 seconds after the remote starter is engaged and this only if the engine temperature is below 0 C (3 F). to activate applicable heated accessories upon remote start regardless of engine temperature, connect [purple/ black] wire to ground. to disable this feature, connect [purple/yellow] wire to ground. BLUE/WHTE WHTE BLACK RED BLUE/WHTE WHTE BLACK RED GREEN/BLACK BLUE/BLACK RED/WHTE BROWN DSABLE - PURPLE/YELLOW PURPLE/BLACK WHTE BLACK/WHTE GREEN PURPLE/WHTE GREEN/BLACK BLUE/BLACK RED/WHTE BROWN PURPLE/YELLOW ENABLE - PURPLE/BLACK WHTE BLACK/WHTE GREEN PURPLE/WHTE

5 Page 5 of 0 FLC-DL-3 Doc. No.: ##480## 0008 type WRNG - wire CROSS CrOSS REFERENCE reference CHART CHart SatUrn Pontac c chevrolet cadllac BUck Make MoDel Year PaSSlock accessory (Pk3)* Gnton Enclave 08- White Brown Pink Lucerne 06- White Brown Pink CTS 08-0 White Brown Pink DTS 06- White Brown Pink Escalade 07- Pink/Black Yellow Pink SRX 07-0 White Brown Pink Avalanche 07-0 Pink/Black Yellow or Brown Pink Equinox White Brown Pink Express 08-0 Pink Brown Pink mpala 06- White Brown Pink Monte Carlo White Brown Pink Silverado 07- Pink/Black Yellow or Brown Pink Suburban 07- Pink/Black Yellow Pink Tahoe 07- Pink/Black Yellow or Brown Pink Traverse 09-0 White Brown Pink Acadia 07- White Brown Pink Savana 08-0 Pink Brown Pink Sierra 07- Pink/Black Yellow or Brown Pink Yukon Pink/Black Yellow or Brown Pink Torrent White Brown Pink Outlook 07-0 White Brown Pink Vue White/Black Yellow Pink Passlock wire changes voltage according to ignition switch status. To identify Passlock wire, test wire voltage in every position: -Keysense VDc. -Accessory 0 VDc. -ON 4.3 VDc. -Start 3 VDc. SUZUk XL White Brown Pink *Wire may vary, refer to pin-out.

6 GREEN install guide Page 6 of 0 FLC-DL-3 Doc. No.: ##480## 0008 type - wiring diagram PK3 REMOTE STARTER OR SECURTY SYSTEM OR KEYLESS ENTRY LEGEND Wiring connections not required when using the DB Port. CONNECT ETHER DB OR STANDARD WRNG DB PORT REQURED ON REMOTE STARTER. F UNAVALABLE USE STANDARD WRNG METHOD PK3+ OPTONAL ADS-RNG-3 REQURED FOR TRANSPONDER BYPASS APPLCATON DB PORT GROUND-OUTPUT WHEN RUNNNG - BLUE/WHTE (NC) WHTE GROUND - BLACK V - RED LOCK/ARM (-) NPUT - GREEN/BLACK UNLOCK/DSARM (-) NPUT - BLUE/BLACK TRUNK (-) NPUT - RED/WHTE TALGATE WNDOW RELEASE (-) NPUT - BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK AUTO-RELOCK (+) NPUT - WHTE ACCESSORY (+) NPUT - BLACK/WHTE *DOOR/TRUNK STATUS (-) OUTPUT - GREEN *TACH (AC) OUTPUT - PURPLE/WHTE YELLOW/BLACK (NC) YELLOW/RED (NC) YELLOW - PASSLOCK BROWN/RED - GROUND* BROWN/YELLOW - HOOD (-) OUTPUT* ORANGE/BLACK - GROUND ORANGE/WHTE (NC) ORANGE - DATA (SWC) PNK/BLACK (NC) PNK - GNTON (+) NPUT STANDARD VOLT, GNTON AND ACCESSORY STLL REQURED FROM THE REMOTE STARTER. MULTPLEX CRCUT S CONTROLLED FROM MODULE USNG DATA, THEREFORE NO ADDTONAL RELAYS OR RESSTORS REQURED. Connect to pin # of OBD connector located under driver side dashboard ACCESSORY PASSLOCK GNTON AUTO-RELOCK Connect the white wire to +V constant if you wish to enable the automatic relock after start feature. MAN GNTON HARNESS CONNECTOR LOCATED AT GNTON BARREL REFER TO WRNG CROSS REFERENCE CHART FOR WRE COLORS this product is protected by one or more of the following patents: U.S. LetterS Patent no. 5,79,55; 6,0,460; 6,43,004; 6,49,6; 6,75,47; 6,97,73; 6,346,876; 6,39,534; 6,59,4; 6,696,97; 6,756,885; 6,756,886; 6,77,67; 6,8,89; 6,94,750; 7,00,40; 7,03,86; 7,046,6; 7,06,37; 7,068,53; 7,05,830; 7,05,679; 7,4,083; 7,369,936; 7,378,945; 7,489,33; 7,50,937; Canadian Patent no.,30,48;,45,03;,46,670;,44,99;,45,0;,45,07;,45,038;,45,04;,50,893;,45,490;,45,96;,45,487; european Patent no.,053,8; de T; U.S ; ; ; ; ; ; ep500565; ; ;

7 Page 7 of 0 FLC-DL-3 Doc. No.: ##480## 0008 type 3 - wire CrOSS reference CHart SatUrn Pontac c chevrolet cadllac BUck Make MoDel Year PaSSlock accessory (Pk3)* Gnton V (+) GroUnD (-) SWc Enclave 08- White Brown Pink Red/White Black/White Green Lucerne 06- White Brown Pink Orange Black Green CTS 08-0 White Brown Pink Orange Black/White Green DTS 06- White Brown Pink Orange Black Green Escalade 07- Pink/Black Yellow Pink Red/White Black/White Green SRX 07-0 White Brown Pink Red/White Black/White Green Avalanche 07-0 Pink/Black Yellow or Brown Pink Red/White Black/White Green Equinox White Brown Pink Red/White Black/White Green Express 08-0 Pink Brown Pink Orange Black/White Green mpala 06- White Brown Pink Red/White Black/White Green Monte Carlo White Brown Pink Red/White Black/White Green Silverado 07- Pink/Black Yellow or Brown Pink Red/White Black/White Green Suburban 07- Pink/Black Yellow Pink Red/White Black/White Green Tahoe 07- Pink/Black Yellow or Brown Pink Red/White Black/White Green Traverse 09-0 White Brown Pink Red/White Black/White Green Acadia 07- White Brown Pink Red/White Black/White Green Savana 08-0 Pink Brown Pink Orange Black/White Green Sierra 07- Pink/Black Yellow or Brown Pink Red/White Black/White Green Yukon Pink/Black Yellow or Brown Pink Red/White Black/White Green Torrent White Brown Pink Red/White Black/White Green Outlook 07-0 White Brown Pink Red/White Black/White Green Vue White/Black Yellow Pink Green Passlock wire changes voltage according to ignition switch status. To identify Passlock wire, test wire voltage in every position: -Keysense VDc. -Accessory 0 VDc. -ON 4.3 VDc. -Start 3 VDc. SUZUk XL White Brown Pink Red/White Black/White Green *Wire may vary, refer to pin-out.

8 Page 8 of 0 FLC-DL-3 Doc. No.: ##480## 0008 type 3 - wiring diagram CONNECTOR LOCATED AT PK3+ MODULE CONSUMPTON WARNNG Please advise that the module consumes approx. 30mA at rest when installed in Type 3. Use type for an approx. 7mA of current consumption. PN-OUT ON CHEVROLET MPALA 008 THAT PN-OUT MAY VARY N OTHER VEHCLES. PLEASE REFER TO NDCATED WRE COLORS. SWC GROUND (-) ACC (+) (PK3) V (+) REFER TO WRNG CROSS REFERENCE CHART FOR WRE COLORS REMOTE STARTER OR SECURTY SYSTEM OR KEYLESS ENTRY LEGEND Wiring connections not required when using the DB Port. PASSLOCK GNTON DB PORT REQURED ON REMOTE STARTER. F UNAVALABLE USE STANDARD WRNG METHOD DB PORT GROUND-OUTPUT WHEN RUNNNG - BLUE/WHTE (NC) WHTE GROUND - BLACK V - RED LOCK/ARM (-) NPUT - GREEN/BLACK UNLOCK/DSARM (-) NPUT - BLUE/BLACK TRUNK (-) NPUT - RED/WHTE TALGATE WNDOW RELEASE (-) NPUT - BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK AUTO-RELOCK (+) NPUT - WHTE PK3 CUT (+) VEHCLE SDE - BLACK/WHTE *DOOR STATUS (-) OUTPUT - GREEN *TACH (AC) OUTPUT - PURPLE/WHTE CONNECT ETHER DB OR STANDARD WRNG WHTE/BLACK - PK3 CUT (+) KEY SDE WHTE/RED - V NPUT WHTE - GROUND YELLOW/BLACK (NC) YELLOW/RED (NC) YELLOW - PASSLOCK BROWN/RED - GROUND* BROWN/YELLOW - HOOD (-) OUTPUT* ORANGE/BLACK (NC) ORANGE/WHTE (NC) ORANGE - DATA (SWC) PNK/BLACK (NC) PNK - GNTON (+) NPUT STANDARD VOLT, GNTON AND ACCESSORY STLL REQURED FROM THE REMOTE STARTER. MULTPLEX CRCUT S CONTROLLED FROM MODULE USNG DATA, THEREFORE NO ADDTONAL RELAYS OR RESSTORS REQURED. AUTO-RELOCK Connect the white wire to +V constant if you wish to enable the automatic relock after start feature.

9 Page 9 of 0 FLC-DL-3 Doc. No.: ##480## 0008 installation mode SeLeCtiOn Press and release programming button to select installation mode. LED flashes (X) once = DATA MODE LED flashes (X) twice = STANDARD HARDWRE MODE! Press and hold programming button until LED turns solid GREEN to register selection. After registration, follow Factory Reset Procedure to change installation mode and restart this procedure. module PrOgramming PrOCedUre Close driver door. 5 LED will flash GREEN. Re-open driver door to wake up data bus. nsert key into ignition. 6 7 ON Turn key to ON position. Wait, LED will turn solid GREEN for seconds. 3 LED will turn solid RED. 8 OFF Turn key to OFF position. 4 ACC Turn key to ACC position. 9 Module Programming Procedure completed.

10 Page 0 of 0 FLC-DL-3 Doc. No.: ##480## 0008 identify VeHiCLe year Locate the Vehicle dentification Number (VN) and identify the 0th character. 4 3 A 5 Y N 5 T A L 8 D 5 R 0 X Match the VN s 0th character to its corresponding year. l > 990 S > 995 Y > > 005 a > 00 M > 99 t > 996 > 00 6 > 006 B > 0 n > 99 V > 997 > 00 7 > 007 c > 0 P > 993 W > > > 008 D > 03 r > 994 X > > > 009 e > 04 led StatUS Flashing RED DaGnoStcS DUrnG ProGraMMnG DUrnG remote Start WtH Gnton off Missing/wrong information from firmware or vehicle ncorrectly programmed Solid RED Waiting for more vehicle information ncorrectly programmed Flashing GREEN Additional steps required to complete programming module diagnostics Correctly programmed and operational ncorrectly programmed or connected Not programmed waiting for more vehicle information False ground when running status from remote starter Solid GREEN then OFF Correctly programmed Reset in progress Reset in progress OFF No activity or already programmed nvalid ground when running status from remote starter At rest and ready for a remote start sequence FaCtOry reset PrOCedUre DSCONNECT all connectors from module EXCEPT the black 4-PN standard or optional data connector. DSCONNECT black 4-PN standard or optional data connector. 5 6 LED will turn solid red for seconds. RESET COMPLETED. RECONNECT all connectors. 3 4 PRESS AND HOLD programming button while connecting either 4-PN standard or optional data connector. When LED flashes red, RELEASE programming button. 7! Repeat programming procedure. Failure to follow procedure may result with a DTC or a CHECK ENGNE error message.