install guide OEM-GM(RS)-GM10-[FLRSGM10]-EN

Transcription

1 install guide Document number Revision Date 2420 firmware OEM-GM(RS)-GM10-[FLRSGM10] hardware FLRSGM10 accessories FLPROG (REQUIRED) NOTICE The manufacturer will accept no responsability for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. Please review the Installation Guide carefully before beginning any work. Automotive Data Solutions Inc. 24 BEFORE INSTALLATI 1- Connect module to computer 2- Login to Weblink account 3- Flash firmware to module (module is not preloaded with firmware) 4- Use accessories accordingly (accessories are sold separately)

2 Page 2 of 17 DOC.: # VEHICLE LIST - 1 OF 2 PUDDLE LIGHT CTRL** TACHOMETER OUTPUT DOOR STATUS OUTPUT HOOD STATUS OUTPUT* TRUNK STATUS OUTPUT BRAKE PEDAL STATUS OUTPUT RAP SHUTDOWN CTRL Lucerne STD key AT CTS STD key AT DTS STD key AT Escallade / ESV / Hybrid STD key AT 1 Escallade EXT STD key AT 1 SRX STD key AT Avalanche STD key AT 1 Caprice STD key AT Captiva Sport STD key AT Equinox STD key AT Express STD key AT Impala STD key AT Monte Carlo STD key AT Silverado / Hybrid STD key AT 1 Silverado / Hybrid Premium Package STD key AT 1 Suburban STD key AT 1 Tahoe / Hybrid STD key AT 1 Traverse STD key AT Traverse with Auto Up/Down Windows STD key AT * If equiped ** If activated in vehicle settings Automotive Data Solutions Inc. 24 INSTALL TYPE HEATED SEATS CTRL Enclave STD key AT TAILGATE WINDOW RELEASE TRUNK/HATCH RELEASE* PRIORITY UNLOCK DOOR UNLOCK DOOR LOCK DISARM OEM ALARM ARM OEM ALARM 3X LOCK REMOTE DATA IMMOBILIZER BYPASS YEAR MODEL CHEVROLET CADILLAC BUICK MAKE FEATURES

3 Page 3 of 17 DOC.: # VEHICLE LIST - 2 OF 2 DISARM OEM ALARM DOOR LOCK DOOR UNLOCK PRIORITY UNLOCK PUDDLE LIGHT CTRL** TACHOMETER OUTPUT DOOR STATUS OUTPUT HOOD STATUS OUTPUT* TRUNK STATUS OUTPUT BRAKE PEDAL STATUS OUTPUT Savana STD key AT Sierra STD key AT 1 Sierra Premium Package STD key AT 1 Yukon / XL / Denali / Hybrid STD key AT 1 H2 STD key AT PTIAC G8 STD key AT Torrent STD key AT Outlook STD key AT Outlook with Auto Up/Down Windows STD key AT Vue / Hybrid STD key AT XL7 STD key AT GMC HUMMER RAP SHUTDOWN CTRL ARM OEM ALARM HEATED SEATS CTRL 3X LOCK REMOTE TAILGATE WINDOW RELEASE DATA IMMOBILIZER BYPASS TRUNK/HATCH RELEASE* YEAR 1 INSTALL TYPE MODEL 1 Acadia with Auto Up/Down Windows STD key AT MAKE Acadia STD key AT SUZUKI SATURN FEATURES * If equiped ** If activated in vehicle settings Automotive Data Solutions Inc. 24

4 Page 4 of 17 DOC.: # BOX CTENTS - 1 OF 1 BOX CTENTS 10 PIN CNECTOR T-HARNESS 1 MODULE LED 2 VS3 LED 1 MS2 PROGRAMMING BUTT VS4 12 PIN CNECTOR G RF PORT/WEBLINK PORT MS1 A F TELEMATIC PORT VS1 E B VS2 D AFTERMARKET HOOD SWITCH AND CABLE C WARNING STICKER WEBLINK CABLE (required accessory sold separately) WEBLINK CABLE MODULE WEBLINK PORT COMPUTER USB PORT 4 PIN BLACK CABLE Automotive Data Solutions Inc. 24

5 Page 5 of 17 DOC.: # Escallade / ESV / Hybrid Escallade EXT Avalanche Caprice Equinox Express CHEVROLET Impala Monte Carlo Silverado / Hybrid POLARITY MODULE LOCATI COMPENT LOCATOR WIRE COLOR DTS POSITI CADILLAC CTS CNECTOR TYPE Lucerne CNECTOR COLOR /Tan CNECTOR NAME YEAR Enclave WIRE DESCRIPTI MODEL BUICK MAKE TYPE 1 - WIRE CHART - 1 OF 2 Silverado / Hybrid Premium Package Suburban Tahoe / Hybrid Traverse Traverse with Auto Up/Down Windows Automotive Data Solutions Inc. 24

6 Page 6 of 17 DOC.: # GMC HUMMER PTIAC SATURN CNECTOR TYPE POSITI WIRE COLOR POLARITY MODULE LOCATI COMPENT LOCATOR Acadia with Auto Up/Down Windows Savana Sierra Sierra Premium Package SUZUKI CNECTOR COLOR CNECTOR NAME YEAR Acadia WIRE DESCRIPTI MODEL MAKE TYPE 1 - WIRE CHART - 2 OF Yukon / XL / Denali / Hybrid H G8 Torrent Outlook Outlook with Auto Up/Down Windows XL Automotive Data Solutions Inc. 24

7 Page 7 of 17 DOC.: # TYPE 1 - WIRING DIAGRAM - 1 OF 1 MODULE VEHICLE IGNITI SWITCH VS3 G RF PORT/WEBLINK PORT F TELEMATIC PORT E A B A1 IGNITI CNECTOR D VS4 C A2 IGNITI HARNESS A MS2 VS1 B1 PK3 CNECTOR B VS2 B2 PK3 HARNESS MS1 B1 A1 C VEHICLE BROWN/BLACK - PARKING LIGHT OUTPUT GRAY - RAP SHUTDOWN OUTPUT CNECT IF NOT SUPPORTED BY DATA OPTIAL PARKING LIGHT DRIVER DOOR PIN HORN 11 GRAY/GREEN - HORN OUTPUT D GRAY/WHITE - HOOD STATUS INPUT WITHOUT OEM HOOD SWITCH: INSTALL AND CNECT TO AFTERMARKET HOOD SWITCH AFTERMARKET HOOD SWITCH Automotive Data Solutions Inc. 24

8 Page 8 of 17 DOC.: # Captiva Sport 6cyl STD key Vue 6cyl STD key Automotive Data Solutions Inc. 24 CNECTOR TYPE POSITI WIRE COLOR POLARITY MODULE LOCATI COMPENT LOCATOR Ignition Green Pink Passlock Green 05 White Ignition Black Pink CNECTOR NAME CNECTOR COLOR SATURN Vue 4cyl / Hybrid STD key WIRE DESCRIPTI MODEL Captiva Sport 4cyl / Hybrid STD key YEAR MAKE SRX STD key CHEVROLET CADILLAC TYPE 2 - WIRE CHART - 1 OF 1 Passlock Black 05 White/Black Ignition Green Pink Passlock Green White/Black Ignition Black Pink Passlock Black 05 White/Black Ignition Green Pink Passlock Green White/Black

9 Page 9 of 17 DOC.: # TYPE 2 - WIRING DIAGRAM - 1 OF 1 MODULE VEHICLE IGNITI SWITCH CUT CNECTOR FROM HARNESS G RF PORT/WEBLINK PORT F TELEMATIC PORT E A B D A1 VS3 C PINK IGNITI YELLOW A PASSLOCK REFER TO WIRE CHART FOR WIRE COLOR AND LOCATI VS IGNITI CNECTOR (NC) MS2 1 VS1 B1 PK3 CNECTOR B VS B2 PK3 HARNESS MS1 B1 A1 C VEHICLE BROWN/BLACK - PARKING LIGHT OUTPUT GRAY - RAP SHUTDOWN OUTPUT CNECT IF NOT SUPPORTED BY DATA OPTIAL PARKING LIGHT DRIVER DOOR PIN HORN 11 GRAY/GREEN - HORN OUTPUT D GRAY/WHITE - HOOD STATUS INPUT WITHOUT OEM HOOD SWITCH: INSTALL AND CNECT TO AFTERMARKET HOOD SWITCH AFTERMARKET HOOD SWITCH Automotive Data Solutions Inc. 24

10 Page 10 of 17 DOC.: # MODULE PROGRAMMING PROCEDURE - 1 OF 1 Close driver door. 07 Re-open driver door to wake up data bus Turn key to position. Insert key into ignition. 09 WARNING: Disconnect power last. Disconnect module from vehicle. Turn key to position. 10 Connect module to computer and proceed with extended programming. Wait, LED 1 will turn solid RED. 11 WARNING: DO NOT press programming button. Connect power first. Connect module to vehicle. Turn key to position. 12 Repeat steps 1 to Turn key to position. Wait, LED 1 will turn solid GREEN for 2 seconds. 15 Module Programming Procedure completed Wait, this may take up to 1 minute. If LED 1 flashes GREEN, proceed with step 08. If LED 1 turns solid GREEN, proceed with step 12. Automotive Data Solutions Inc. 24

11 VALET MODE PROGRAMMING PROCEDURE - 1 OF 1 >> 06 Insert key into ignition. 07 Valet Mode Programming Procedure completed. Time restriction. Complete next step within 7 seconds. >> To exit valet mode: repeat steps 1 to 6. Remove key. NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional. See RF kit user manual for alternate valet mode programming. Page 11 of 17 DOC.: # Turn key to position then to position five times [5x] rapidly. 5x Wait, LED 1 will turn solid RED for 2 seconds. 05 Turn key to position. Automotive Data Solutions Inc. 24

12 Page 12 of 17 DOC.: # MODULE NAVIGATI PROCEDURE - 1 OF 1 >> It is mandatory to exit the Module Navigation at the end of this procedure. Failure to exit the Module Navigation will drain vehicle battery. To exit the Module Navigation at any time: Follow STEP 13. >> Module must be programmed to the vehicle. 05 >> Use the Module Navigation Chart on the next page. 06 Set ignition to position. 07 TO ESS THE MENUS: Press and hold programming button until LED 1 turns solid GREEN. 08 IN THE MENUS: Press the programming button as many times as the menu number indicates. LED 1 will flash GREEN an equal amount of times continuously. 09 [X] Automotive Data Solutions Inc. 24 TO ESS THE OPTIS: Press and hold programming button until LED 1 turns solid RED. 10 IN THE OPTIS: Press the programming button as many times as the option number indicates. LED 1 will flash RED an equal amount of times continuously. 11 TO ESS THE SETTINGS: Press and hold programming button until LED 1 turns solid GREEN. 12 Configure every other setting and proceed to step 13. [Z] LED 1 will flash GREEN as many times as the current (or default) setting number, continuously. 13 MANDATORY: EXIT MODULE NAVIGATI. Press and hold programming button for 7 seconds. LED 1 will flash RED rapidly. Release programming button. LED 1 will turn. [Z] IN THE SETTINGS: Press the programming button as many times as necessary to access your setting. LED 1 will flash GREEN an equal amount of times continuously. 14 Module navigation completed. To return to the MENUS: exit the Module Navigation and redo the Module Navigation Procedure. >> Failure to exit the Module Navigation will drain vehicle battery. [Y] To save and return to the OPTIS: Press and hold programming button until LED 1 turns solid RED. [Y] LED 1 will flash RED as many times as the current option number continuously.

13 Page 13 of 17 DOC.: # [Y] options [X] menus module navigation chart: notes I Default settings are listed in bold. II Make sure the option is covered on the vehicle before attempting to change the setting. DISARM/UNLOCK BEFORE RELOCK AFTER RELOCK AFTER SHUTDOWN FORCE UNLOCK ALL FIRST PRESS 05 TAKEOVER [Z] settings module navigation chart - 1 OF 2 FACTORY KEYLESS RS SEQUENCE CFIGURATI MODULE RUN TIME WAIT TO DELAY off off off off enable DISABLE* DISABLE LOCK + UNLOCK + LOCK LocK + LocK + LocK MIN 05 MIN 10 MIN 15 MIN MIN MIN MIN min sec 05 SEC 08 SEC 10 SEC SEC SEC SEC SEC *Vehicle will shutdown when a door is opened. Automotive Data Solutions Inc. 24

14 Page 14 of 17 DOC.: # [Y] options [X] menus module navigation chart: notes 14 [Z] settings module navigation chart - 2 OF 2 HORN EVENT TRIGGER CFIGURATI Technical Support only HORN CHIRPS WIDTH DoubLe LocK LOCK + UNLOCK LOCK + UNLOCK + DOUBLE LOCK + 30 msec 15 msec 60 msec *Vehicle will shutdown when a door is opened. Automotive Data Solutions Inc. 24

15 [X] number of PaRKing Light FLashes Diagnostic Remote starter error codes - 1 OF 1 I WARNING: The following applies only when the parking lights are connected and supported by the system. Foot brake is. Hood is open. II After a remote starter failure, the parking lights will flash [X] number times to indicate an error code. See table. 05 Engine tach signal is lost. 06 System is in Valet Mode. 07 Vehicle is moving (VSS). 08 Glow plug timeout error. 09 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence CAN communication failure during RS sequence. Remote starter error codes: notes Automotive Data Solutions Inc. 24 Page 15 of 17 DOC.: #

16 I II III DURING PROGRAMMING DURING REMOTE WITH IGNITI Automotive Data Solutions Inc. 24 Diagnostic test module LeD 1 status module Diagnostics - 1 OF 1 Flashing RED Missing/wrong information from firmware or vehicle. Solid RED Module waiting for more vehicle information. Flashing GREEN Additional steps required to complete module programming. Solid GREEN then Module correctly programmed. No activity or module already programmed. Flashing RED Module incorrectly programmed. Solid RED Module incorrectly programmed. Flashing GREEN Module correctly programmed and operational. Solid GREEN then Reset in progress. Invalid ground when running status from remote starter. Flashing RED Module incorrectly programmed or connected. Solid RED Module not programmed. Waiting for more vehicle information. Flashing GREEN False ground when running status from remote starter. Solid GREEN then Reset in progress. Module at rest and ready for a remote start sequence. Page 16 of 17 DOC.: #

17 MODULE RESET PROCEDURE - 1 OF 1 Disconnect all connectors from module except the BLACK 20-PIN connector. 07 Reconnect all connectors. Disconnect the BLACK 20-PIN connector. 08 Repeat programming procedure. PRESS AND HOLD programming button while connecting the BLACK 20-PIN connector. >> Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. Wait, LED 1 will flash RED. RELEASE programming button. 05 LED 1 will turn RED for 2 seconds. 06 Module RESET completed. Automotive Data Solutions Inc. 24 Page 17 of 17 DOC.: #