GM3. Audiovox Electronics Corp.

Transcription

1 Audiovox Electronics Corp. INSTALL GUIDE FLC-AL(DL)-GM3-EN Available for : FLCAN Rev. Date: June, 202 Doc. No.: ##9336## GM3 please visit for complete product details The brand names and logos found in this guide are property of their respective owners. Audiovox Electronics Corp. 202 NOTICE: The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself or to the installed device. This device must be installed by a certified technician. This guide has been written for properly trained technicians; a certain level of skill & knowledge is therefore assumed. Please!review the Installation Guide carefully before beginning any work.

2 Page 2 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## install type SeLeCtiOn FEATURES NOTE INSTALL TYPE RELAY CTRL FOR OPTIONAL RING DATA IMMOBILIZER BYPASS ARM OEM ALARM DISARM OEM ALARM DOOR LOCK DOOR UNLOCK PRIORITY UNLOCK TRUNK/HATCH RELEASE* TAILGATE WINDOW RELEASE HEATED SEATS CTRL PUDDLE LIGHT CTRL** TACHOMETER OUTPUT DOOR STAT OUTPUT HOOD STAT OUTPUT* TRUNK STAT OUTPUT BRAKE PEDAL STAT OUTPUT E-BRAKE OUTPUT RAP SHUTDOWN CTRL I II Mandatory: Module software version 4.3 or higher. Read Comparative Install Type Notice (next page) for install solutions. BUICK Enclave or 3 Lucerne 06-2 or 3 CADILLAC CHEVROLET GMC CTS 08-2 or 3 DTS 06-2 or 3 Escallade / ESV / Hybrid or 3 Escallade EXT or 3 SRX or 3 Avalanche 07-2 or 3 Equinox or 3 Express or 3 Impala 06-2 or 3 Monte Carlo or 3 Silverado / Hybrid or 3 Silverado / Hybrid or 3 Premium Package Suburban or 3 Tahoe / Hybrid 07-2 or 3 Traverse 09-2 or 3 Traverse with 09-2 or 3 Auto Up/Down Windows Acadia or 3 Acadia with or 3 Auto Up/Down Windows Savana 08-2 or 3 Sierra or 3 Sierra Premium Package or 3 Yukon / XL / Denali / Hybrid or 3 HUMMER H or 3 * If equiped ** If activated in vehicle settings

3 Page 3 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## install type SeLeCtiOn FEATURES NOTE INSTALL TYPE RELAY CTRL FOR OPTIONAL RING DATA IMMOBILIZER BYPASS ARM OEM ALARM DISARM OEM ALARM DOOR LOCK DOOR UNLOCK PRIORITY UNLOCK TRUNK/HATCH RELEASE* TAILGATE WINDOW RELEASE HEATED SEATS CTRL PUDDLE LIGHT CTRL** TACHOMETER OUTPUT DOOR STAT OUTPUT HOOD STAT OUTPUT* TRUNK STAT OUTPUT BRAKE PEDAL STAT OUTPUT E-BRAKE OUTPUT RAP SHUTDOWN CTRL I II Mandatory: Module software version 4.3 or higher. Read Comparative Install Type Notice (next page) for install solutions. PONTIAC G or 3 Torrent or 3 SATURN Outlook or 3 Outlook with or 3 Auto Up/Down Windows Vue / Hybrid or 3 SUZUKI XL or 3 * If equiped ** If activated in vehicle settings

4 Page 4 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## type 3 - warning: notice read CareFULLy IMPORTANT I II III Ground When Running from Remote Starter must be provided BEFORE Ignition. Failure to comply may result in immobilizer bypass malfunction during remote start. If Ground When Running from Remote Starter CAN T be provided BEFORE Ignition, use install type 2 ONLY. - DO NOT program unlock before start on the Remote Starter. - DO NOT change Remote Starter OEM alarm control default settings. Failure to comply may result in product malfunction. install type COmParatiVe notice INSTALL TYPE 2: RECOMMENDED INSTALL TYPE 3: OPTIONAL I Uses about 7mA at rest I Uses about 30mA at rest. II III Requires a transponder bypass ring for transponder bypass fonctions. Recommended on fleet configured vehicles and vehicles equiped with OEM remote starters. II Disallows cycling key ON and OFF rapidly as it may prevent the next attempt to remote start until vehicle is started by key again. Advise vehicle owner. Heated accessories notice NOTE I II View compatibility chart for applicable vehicles. in all supported vehicle, heated accessories will automatically be activated 5 seconds after the remote starter is engaged and this only if the engine temperature is below 0 C (32 F). 2 to activate applicable heated accessories upon remote start regardless of engine temperature, connect [purple/ black] wire to ground. to disable this feature, connect [purple/yellow] wire to ground. BLUE/WHITE WHITE BLACK RED BLUE/WHITE WHITE BLACK RED GREEN/BLACK BLUE/BLACK RED/WHITE BROWN DISABLE - PURPLE/YELLOW PURPLE/BLACK WHITE BLACK/WHITE GREEN PURPLE/WHITE GREEN/BLACK BLUE/BLACK RED/WHITE BROWN PURPLE/YELLOW ENABLE - PURPLE/BLACK WHITE BLACK/WHITE GREEN PURPLE/WHITE

5 Page 5 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## type 2 - wire CrOSS reference CHart - OF 3 CONNECTOR CHEVROLET CADILLAC BUICK DESCRIPTION NAME TYPE POSITION POLARITY LOCATION COMPONENT LOCATOR Enclave 08-2 Lucerne 06- CTS 08- DTS 06- Escalade 07-2 Accessory (PK3+)* ~ ~ 6 pin 3 Yellow (+) Ignition connector ~ SRX 07-0 Avalanche 07- Accessory (PK3+)* ~ ~ 6 pin 3 Yellow or Brown (+) Ignition connector ~ Equinox Express 08-2 Passlock ~ ~ 6 pin 5 Pink (+) Ignition connector ~ Impala 06- Monte Carlo *Wire color may vary, refer to pin-out.

6 Page 6 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## type 2 - wire CrOSS reference CHart - 2 OF 3 CONNECTOR SATURN PONTIAC GMC CHEVROLET DESCRIPTION NAME TYPE POSITION POLARITY LOCATION COMPONENT LOCATOR Silverado 07-2 Accessory (PK3+)* ~ ~ 6 pin 3 Yellow or Brown (+) Ignition connector ~ Suburban 07-2 Accessory (PK3+)* ~ ~ 6 pin 3 Yellow (+) Ignition connector ~ Tahoe 07- Accessory (PK3+)* ~ ~ 6 pin 3 Yellow or Brown (+) Ignition connector ~ Traverse 09- Acadia 07-2 Savana 08- Passlock ~ ~ 6 pin 5 Pink (+) Ignition connector ~ Sierra 07-2 Accessory (PK3+)* ~ ~ 6 pin 3 Yellow or Brown (+) Ignition connector ~ Yukon 07-2 Accessory (PK3+)* ~ ~ 6 pin 3 Yellow or Brown (+) Ignition connector ~ G Passlock ~ ~ 6 pin 6 White/Black (+) Ignition connector ~ Torrent Outlook 07-0 *Wire color may vary, refer to pin-out.

7 Page 7 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## type 2 - wire CrOSS reference CHart - 3 OF 3 CONNECTOR SUZUKI SATURN DESCRIPTION NAME TYPE POSITION POLARITY LOCATION COMPONENT LOCATOR Vue 08-0 Passlock ~ ~ 6 pin 5 White/Black (+) Ignition connector ~ Accessory (PK3+)* ~ ~ 6 pin 3 Yellow (+) Ignition connector ~ XL *Wire color may vary, refer to pin-out.

8 Page 8 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## type 2 - wiring diagram GROUND (-) 2V (+) REMOTE STARTER 2V (+) GROUND (-) ACCESSORY (+) INPUT TACH (AC) INPUT HOOD STATUS (-) INPUT TAILGATE WINDOW RELEASE (-) OUTPUT TRUNK (-) OUTPUT UNLOCK (-) OUTPUT LOCK (-) OUTPUT 2V (+) GROUND (-) GROUND WHEN RUNNING (-) OUTPUT DATA MODE OPTIONAL RNG-GM3 IS REQUIRED FOR TRANSPONDER BYPASS APPLICATION. REQUIRED -> BRAKE STATUS (+) INPUT REQUIRED -> E-BRAKE STATUS (-) INPUT OPTIONAL -> TRUNK STATUS (-) INPUT OPTIONAL -> DOOR STATUS (-) INPUT REQUIRED -> IGNITION (+) INPUT PK3+ N/A LEGEND NOT REQUIRED IN DATA MODE (-WAY) NOT REQUIRED IN DATA MODE (2-WAY) USE DATA MODE OR HARD MODE DATA MODE! GWR (-) INPUT - BLUE/WHITE (NC) WHITE GROUND - BLACK 2V (+) - RED LOCK/ARM (-) INPUT - GREEN/BLACK UNLOCK/DISARM (-) INPUT - BLUE/BLACK TRUNK (-) INPUT - RED/WHITE TAILGATE WINDOW RELEASE (-) INPUT - BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK AUTO-RELOCK (+) INPUT - WHITE ACCESSORY (+) INPUT - BLACK/WHITE HOOD STATUS (-) OUTPUT - GREEN TACH (AC) OUTPUT - PURPLE/WHITE YELLOW/BLACK - DOOR STATUS (-) OUTPUT YELLOW/RED - TRUNK STATUS (-) OUTPUT YELLOW - PASSLOCK BROWN/RED (NC) BROWN/YELLOW (NC) ORANGE/BLACK - GROUND (-) ORANGE/WHITE (NC) ORANGE - DATA (SWC) PINK/BLACK (NC) PINK - IGNITION (+) INPUT! AUTO-RELOCK CONNECT THE WHITE TO +2V CONSTANT IF YOU WISH TO ENABLE THE AUTOMATIC RELOCK AFTER START FEATURE. BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED - E-BRAKE STATUS (-) OUTPUT GREEN/YELLOW (NC) GRAY/RED - BRAKE STATUS (+) OUTPUT GRAY/YELLOW (NC) MAIN IGNITION HARNESS CONNECTOR LOCATED AT IGNITION SWITCH IGNITION (+) PASSLOCK NOTE MULTIPLEX CIRCUIT IS CONTROLLED FROM MODULE USING DATA, THEREFORE NO ADDITIONAL RELAYS OR RESISTORS REQUIRED. REFER TO WIRING CHART TO IDENTIFY AND LOCATION ACCESSORY (+) GREEN OBDII CONNECTOR LOCATED

9 Page 9 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## type 3 - wire CrOSS reference CHart - OF 4 CONNECTOR CHEVROLET CADILLAC BUICK DESCRIPTION NAME TYPE POSITION POLARITY LOCATION COMPONENT LOCATOR Enclave 08-2 Lucerne 06-2V (0AMP) ~ ~ 5 pin Orange (+) PK3+ connector ~ Ground ~ ~ 5 pin 3 Black (-) PK3+ connector ~ CTS 08-2V (0AMP) ~ ~ 5 pin Orange (+) PK3+ connector ~ DTS 06-2V (0AMP) ~ ~ 5 pin Orange (+) PK3+ connector ~ Ground ~ ~ 5 pin 3 Black (-) PK3+ connector ~ Accessory (PK3+)* ~ ~ 5 pin 2 Yellow (+) PK3+ connector ~ Escalade 07-2 SRX 07-0 Passlock ~ ~ 6 pin 5 Pink/Black ~ Ignition connector ~ Accessory (PK3+)* ~ ~ 5 pin 2 Yellow or Brown ~ PK3+ connector ~ Avalanche 07- Ignition ~ ~ 6 pin Pink ~ Ignition connector ~ SWC ~ ~ 5 pin 5 Green ~ PK3+ connector ~ *Wire color may vary, refer to pin-out.

10 Page 0 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## type 3 - wire CrOSS reference CHart - 2 OF 4 CONNECTOR CHEVROLET DESCRIPTION NAME TYPE POSITION POLARITY LOCATION COMPONENT LOCATOR Equinox Passlock ~ ~ 6 pin 5 Pink (+) Ignition connector ~ Express V (0AMP) ~ ~ 5 pin Orange (+) PK3+ connector ~ Impala 06- Monte Carlo Accessory (PK3+)* ~ ~ 5 pin 2 Yellow or Brown (+) PK3+ connector ~ Silverado 07-2 Accessory (PK3+)* ~ ~ 5 pin 2 Yellow (+) PK3+ connector ~ Suburban 07-2 Accessory (PK3+)* ~ ~ 5 pin 2 Yellow or Brown (+) PK3+ connector ~ Tahoe 07- *Wire color may vary, refer to pin-out.

11 Page of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## type 3 - wire CrOSS reference CHart - 3 OF 4 CONNECTOR PONTIAC GMC CHEVROLET DESCRIPTION NAME TYPE POSITION POLARITY LOCATION COMPONENT LOCATOR Traverse 09- Acadia 07-2 Passlock ~ ~ 6 pin 5 Pink (+) Ignition connector ~ Savana 08-2V (0AMP) ~ ~ 5 pin Orange (+) PK3+ connector ~ Accessory (PK3+)* ~ ~ 5 pin 2 Yellow or Brown (+) PK3+ connector ~ Sierra 07-2 Accessory (PK3+)* ~ ~ 5 pin 2 Yellow or Brown (+) PK3+ connector ~ Yukon 07-2 Passlock ~ ~ 6 pin 6 White/Black (+) Ignition connector ~ G V (0AMP) ~ ~ 5 pin Orange/Black (+) PK3+ connector ~ Ground ~ ~ 5 pin 3 Black (-) PK3+ connector ~ Torrent *Wire color may vary, refer to pin-out.

12 Page 2 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## type 3 - wire CrOSS reference CHart - 4 OF 4 CONNECTOR SUZUKI SATURN DESCRIPTION NAME TYPE POSITION POLARITY LOCATION COMPONENT LOCATOR Outlook 07-0 Passlock ~ ~ 6 pin 5 White/Black (+) Ignition connector ~ Accessory (PK3+)* ~ ~ 5 pin 2 Yellow (+) PK3+ connector ~ Vue V (0AMP) ~ ~ 5 pin ~ (+) PK3+ connector ~ Ground ~ ~ 5 pin 3 ~ (-) PK3+ connector ~ XL *Wire color may vary, refer to pin-out.

13 Page 3 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## type 3 - wiring diagram CONSUMPTION WARNING PLEASE ADVISE THAT THE MODULE CONSUMES APPROX. 30mA AT REST WHEN INSTALLED IN TYPE 3. USE TYPE 2 FOR AN APPROX. 7mA OF CURRENT CONSUMPTION. REMOTE STARTER 2V (+) TACH (AC) INPUT HOOD STATUS (-) INPUT TAILGATE WINDOW RELEASE (-) OUTPUT TRUNK (-) OUTPUT UNLOCK (-) OUTPUT LOCK (-) OUTPUT 2V (+) GROUND (-) GROUND WHEN RUNNING (-) OUTPUT DATA MODE REQUIRED -> 2V (+) REQUIRED -> GROUND (-) REQUIRED -> BRAKE STATUS (+) INPUT REQUIRED -> E-BRAKE STATUS (-) INPUT OPTIONAL -> TRUNK STATUS (-) INPUT OPTIONAL -> DOOR STATUS (-) INPUT REQUIRED -> ACCESSORY (+) INPUT REQUIRED -> IGNITION (+) INPUT N/A LEGEND NOT REQUIRED IN DATA MODE (-WAY) NOT REQUIRED IN DATA MODE (2-WAY) USE DATA MODE OR HARD MODE!! GWR (-) INPUT - BLUE/WHITE (NC) WHITE GROUND - BLACK 2V (+) - RED LOCK/ARM (-) INPUT - GREEN/BLACK UNLOCK/DISARM (-) INPUT - BLUE/BLACK TRUNK RELEASE (-) INPUT - RED/WHITE TAILGATE WINDOW RELEASE (-) INPUT - BROWN (NC) PURPLE/YELLOW (NC) PURPLE/BLACK AUTO-RELOCK (+) INPUT - WHITE PK3 CUT (+) VEHICULE SIDE - BLACK/WHITE HOOD STATUS (-) OUTPUT - GREEN TACH (AC) OUTPUT - PURPLE/WHITE AUTO-RELOCK CONNECT THE WHITE TO +2V CONSTANT IF YOU WISH TO ENABLE THE AUTOMATIC RELOCK AFTER START FEATURE. DATA MODE WHITE/BLACK - PK3 CUT (+) KEY SIDE WHITE/RED - 2V (+) INPUT WHITE - GROUND (-) YELLOW/BLACK - DOOR STATUS (-) OUTPUT YELLOW/RED - TRUNK STATUS (-) OUTPUT YELLOW - PASSLOCK BROWN/RED (NC) BROWN/YELLOW (NC) ORANGE/BLACK (NC) ORANGE/WHITE (NC) ORANGE - DATA (SWC) PINK/BLACK (NC) PINK - IGNITION (+) INPUT BLUE/RED (NC) BLUE/YELLOW (NC) GREEN/RED - E-BRAKE STATUS (-) OUTPUT GREEN/YELLOW (NC) GRAY/RED - BRAKE STATUS (+) OUTPUT GRAY/YELLOW (NC) SWC (DATA) GROUND (-) NOTE MULTIPLEX CIRCUIT IS CONTROLLED FROM MODULE USING DATA, THEREFORE NO ADDITIONAL RELAYS OR RESISTORS REQUIRED IGNITION (+) ACCESSORY (+) PASSLOCK 5 4 ACC (+) (PK3) 3 2 CONNECTOR LOCATED AT PK3+ MODULE REFER TO WIRING CHART TO IDENTIFY AND LOCATION

14 Page 4 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## installation mode SeLeCtiOn Press and release programming button to select installation mode. LED flashes (X) once = DATA MODE LED flashes (2X) twice = STANDARD HARD MODE 2! Press and hold programming button until LED turns solid GREEN to register selection. After registration, follow Factory Reset Procedure to change installation mode and restart this procedure. module PrOgramming PrOCedUre Close driver door. 5 LED will flash GREEN. 2 Re-open driver door to wake up data bus. Insert key into ignition. 6 7 ON Turn key to ON position. Wait, LED will turn solid GREEN for 2 seconds. 3 LED will turn solid RED. 8 OFF Turn key to OFF position. 4 ACC Turn key to ACC position. 9 Module Programming Procedure completed.

15 Page 5 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## transponder PrOgramming TRANSPONDER PRE-PROGRAMMING PROCEDURE Unplug all connectors from transponder unit. 2 Ready for Transponder Programming Procedure. TRANSPONDER PROGRAMMING PROCEDURE Insert key into ignition. 5 Hold transponder unit next to ignition slot and remote start vehicle. 2 3 OFF START Turn key to START position. Wait, 5 seconds. Turn key to OFF position. 6 7 Wait, security light will turn ON then OFF (may take up to 5 seconds). Transponder Programming Procedure completed. 4 Remove key.

16 Page 6 of 6 FLC-AL(DL)-GM3-EN Doc. No.: ##9336## identify VeHiCLe year Locate the Vehicle Identification Number (VIN) and identify the 0th character. 4 3 A 5 Y N 5 T A L 8 D 5 R 0 X 2 Match the VIN s 0th character to its corresponding year. L > 990 S > 995 Y > > 2005 A > 200 M > 99 T > 996 > > 2006 B > 20 N > 992 V > > > 2007 C > 202 P > 993 W > > > 2008 D > 203 R > 994 X > > > 2009 E > 204 LED STATUS Flashing RED DIAGNOSTICS DURING PROGRAMMING DURING REMOTE START WITH IGNITION OFF Missing/wrong information from firmware or vehicle Incorrectly programmed Solid RED Waiting for more vehicle information Incorrectly programmed Flashing GREEN Additional steps required to complete programming module diagnostics Correctly programmed and operational Incorrectly programmed or connected Not programmed waiting for more vehicle information False ground when running status from remote starter Solid GREEN then OFF Correctly programmed Reset in progress Reset in progress OFF No activity or already programmed Invalid ground when running status from remote starter At rest and ready for a remote start sequence FaCtOry reset PrOCedUre 2 DISCONNECT all connectors from module EXCEPT the black 4-PIN standard or optional data connector. DISCONNECT black 4-PIN standard or optional data connector. 5 6 LED will turn solid red for 2 seconds. RESET COMPLETED. RECONNECT all connectors. 3 4 PRESS AND HOLD programming button while connecting either 4-PIN standard or optional data connector. When LED flashes red, RELEASE programming button. 7! Repeat programming procedure. Failure to follow procedure may result with a DTC or a CHECK ENGINE error message. this product is protected by one or more of the following patents: U.S. LetterS Patent no. 5,79,55; 6,0,460; 6,243,004; 6,249,26; 6,275,47; 6,297,73; 6,346,876; 6,392,534; 6,529,24; 6,696,927; 6,756,885; 6,756,886; 6,77,67; 6,82,829; 6,924,750; 7,00,402; 7,03,826; 7,046,26; 7,06,37; 7,068,53; 7,05,830; 7,205,679; 7,224,083; 7,369,936; 7,378,945; 7,489,233; 7,50,937; Canadian Patent no. 2,320,248; 2,45,023; 2,426,670; 2,44,99; 2,45,0; 2,45,027; 2,45,038; 2,45,04; 2,502,893; 2,45,490; 2,452,296; 2,45,487; european Patent no.,053,28; de T2; U.S ; ; ; ; ; ; ep500565; ; ;