Brochure. Compact Cylinders. Setting a new standard for: Quality Reliability Value Global Compatibility

Similar documents
Extruded Thrusters. Brochure

Climax Pneumatics Cnomo NFE Cylinders

Climax Pneumatics. Cnomo NFE Cylinders Easley, South Carolina

Climax Pneumatics. ISO 6432 Interchangeable Cylinders Easley, South Carolina

INTEGRATED HYDRAULIC BRAKE ACTUATORS

SERIES PA SWING ARM CLAMPS for the Automotive Industry

ACRO USER MANUAL MODEL 600 PINCH VALVES INSTALLATION AND OPERATION INFORMATION

ACRO USER MANUAL RS RACK SLIDE ACTUATORS

Table of Contents ISO

: 660 N. For material handling and clamping of small workpieces. CKZT25 -X2797 (Base Type) Power Clamp Cylinder INFORMATION. ø

Series OCG Pneumatic Cylinders

Today Numatics is proud to be a part of the Industrial Automation Division of Emerson Electric Co.

KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS

PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS

EQ Series OEM Aluminum NFPA Interchangeable Cylinder Line

NFPA Double acting imperial cylinders

PRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS.

Heavy Duty Bench Top Presses

SERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET

FDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)

INTEGRATED HYDRAULIC BRAKE

Multi-Act Integrated Motion Controller

/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting

ISO/VDMA Series ISO 6431 and VDMA Cylinder Line

E Series Economic Tie-Rod Cylinder Line

E Series Economic Tie-Rod Cylinder Line

FKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot

HEAVY LIFTERS FOR MATERIAL HANDLING

Table of Contents. ISO/VDMA Series

ISO CYLINDERS Ø ACTUATORS

Ideal for part clamping in weld areas

For material handling and clamping of small workpieces

Series OCQ Pneumatic Compact Cylinders

S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable

Cylinder Thrust. Unit: Newton (N)

ISO/VDMA Series ISO 6431 and VDMA Cylinder Line ISO 6431 and VDMA Cylinder Line w w w. n u m a t i c s. c o m

AIR CYLINDER Series A12, A13

Grippers Parallel grippers

FOR PART CLAMPING IN WELD AREAS

Series NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16" to 2".

Linear slide cylinder Double acting single rod type. Bore size: 4.5, 6, 8. Descriptions Bore size mm

TL-W. Standard Flat Sensors in Many Different Variations. Flat Inductive Proximity Sensor. Ordering Information

Series 83. Stainless Steel Mini Cylinder

Automation Products Gripper Automation Summary Grippers Automation Products Actuator Products Grippers Slide Tables Rotary Tables

We shut the air supply down to our clamps once they are in position. Sometimes we notice that they are sticking. Could this be the cause?

Table of Contents Tiny Titan Series Features and Benefits How to Order Optional Features

A44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting

CDM CREEPDRIVE MOTOR

Free Mount Cylinder. Series. Series CU CAT.EUS20-95 B -UK. Space-saving. Auto Switch Capable P. 4, 23, 37 P. 45 P. 43

M/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm

Ideal for robotic and end effector applications

Ideal for robotic and end effector applications

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated

Features. Maintenance is simplified with the separable scraper section adapter.

ARM OVER CLAMP FOR ASSEMBLY AND WELDING

Free Mount Cylinder. Series CU. A space-saving air cylinder with multiple surfaces capable of mounting directly. Offered in rich variations.

Rotary Actuator. New RoHS. New. Vane Type 10, 15, 20, 30, 40. Many combinations available! Series CRB 2. Standard type/series CRB2

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm

Maintenance Instructions & Parts List

Free position locking flat and compact cylinder UFCD Series

Pneu-Turn Rotary Actuators

ACRO USER MANUAL BELT-DRIVEN HSXZ

Series MXU ø6, ø10, ø16

acting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.

Solenoid valve VDHT standard BSP (British Standard Pipe)

Features. Specification. Model. Acting type. Tube I.D. (mm) 20,25 32,40,50,63,80,100. Port size M5 0.8 G1/8. Proof pressure.

MULTI SLIDERS CONTENTS

Air Cylinders. Fine Quality. Precision Engineered. Advanced Design. Excellent Prices S T C. Tel:

Series RSH/RS1H. To stop pallets gently. Stopper cylinder with built-in shock absorber. Heavy Duty Stopper Cylinder. ø20, ø32 ø50, ø63, ø80

SOLENOID VALVES AND PNEUMATIC VALVES

3/2-way Solenoid Valve for pneumatics

Medium bore size cylinder Double acting, non-rotating type. CMK2-M Series. Bore size: 20, 25, 32, 40

ACRO USER MANUAL BELT-DRIVEN S SERIES

P1Z Series. Magnetically Coupled Rodless Air Cylinders Contents

Linear Thrusters/PneuMoment

EQ Series OEM Aluminum NFPA Interchangeable Cylinder Line

Linear Thrusters/PneuMoment

Guide Table. MGF Series

Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

PNEUMATIC ROTARY ACTUATORS

pneumatic swing clamps

Linear Thrusters/PneuMoment

KRONES DIRECT REPLACEMENTS

Kuhnke Technical Data. Contact Details

Bimba Metric Flow Controls: FCPM Series M5 Port Mounted Flow Control Valves For M5 port, FCPM-1-Q4-L 4mm OD tubing 2mm ID tubing For M5 port, 4mm OD t

Table of Contents FE Series Features and Benefits

Slide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32

Light weight clamp cylinder CAC-N32/40 Series Light weight position locking clamp cylinder UCAC-N32/40 Series

Compressed air to

SOLENOID VALVES SERIES

High Precision Scale Cylinder. How to Order. Connector. Cable suffix Nil Extension cable C Extension cable & connector

ACTUATORS GENERAL CATALOG

Precision Cylinder. MTS Series. ø8, ø12, ø16, ø20, ø25, ø32, ø40 MXH MXS MXQ MXQ MXF MXW MXJ MXP MXY MTS D- -X. Series Variations MTS8

Compact Slide. Series MXH ø6, ø10, ø16, ø20

Guide Table. ø40, ø63, ø100

Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)

Reed, Electronic. MOVEMENT > Series CST-CSV-CSH proximity switches GENERAL DATA

6 Cylinder stroke. Standard stroke Bore size Ø12 Ø16. Action 75, 100 Ø50 Ø63 Ø80 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, Ø100 75, 100 Ø125

Transcription:

Brochure Compact Cylinders Setting a new standard for: Quality Reliability Value Global Compatibility

Actuators - Compact Cylinders How to Order MODEL MACQ - Compact Cylinder MAGNET Blank - No Magnet S - With Magnet PORTS T - See Engineering Specifications MACQ - 16 X 30 - S - T BORE (mm) 12 16 20 25 32 40 50 63 80 100 STROKE (mm) 5 X X X X X X X X X X 10 X X X X X X X X X X 15 X X X X X X X X X X 20 X X X X X X X X X X 25 X X X X X X X X X X 30 X X X X X X X X X X 40 X X X X X X X X X X 50 X X X X X X X X X X 75 X X X X X X X X 100 X X X X X X X X 125 X X X X X X 150 X X X X X X Bore Size (mm) 12 16 20 25 32 40 50 63 80 100 Fluid Air (Clean/Dry) Action Double Acting Pressure Range 14 to 145 PSI (0.1 to 1.0 MPa) Proof Pressure 215 PSI (1.5 MPa) Temperature Range -4 to 176 F (-20 to 80 C) Cushion Type Bumper Speed Range 30 to 500 mm/s Stroke Tolerance +1.0 / -0 Port Size M5 X 0.8 1/8 NPT 1/4 NPT 3/8 NPT Thrust, N (lbs) 1 Sensor Switches 2 Pushing Force Pulling Force Reed Switch Compatibility Solid State Switch Compatability 1 Thrust of cylinder at 0.6 MPa (87psi) inlet pressure. 2 See page 7 for switch specifi cations. Engineering Specifications 68 (15) 51 (11) 121 (27) 91 (20) 189 (42) 141 (32) 295 (66) 227 (51) 483 (108) 362 (81) 754 (169) 633 (142) MCS1-G MDS1-G 1178 (264) 990 (222) 1870 (420) 1682 (378) 3016 (678) 2721 (611) 4712 (1059) 4230 (950) 2

Actuators - Compact Cylinders Materials Number Item Material 1 Magnet Washer No Magnet Washer (Ø12-Ø25 and Ø32-Ø100 with stroke 100mm); NBR (Ø32-Ø100 with stroke >100mm) 2 Magnet Sintered Metal (Neodymium-Iron-Boron) (Ø12-Ø25); Plastic (Ø32-Ø100) 3 Piston Brass (Ø12, Ø16); Aluminum Alloy (Ø20-Ø100) 4 O-Ring NBR 5 Back Cap Cap incorporated into body (Ø12, Ø16); Aluminum Alloy (Ø20-Ø100) 6 Bumper TPU (Ø12-Ø25); NBR (Ø32-Ø100) 7 Retaining Ring Spring Steel 8 Wear Ring No Wear Ring (Ø12-Ø32); Wear Resistant Material (Ø40-Ø100) 9 Piston Seal NBR 10 Magnet Holder Brass (Ø12, Ø16); Aluminum Alloy (Ø20-Ø100) 11 Piston Rod Carbon Steel with 20μm Chrome Plating 12 Body Aluminum Alloy 13 Bumper NBR 14 Bushing No Bearing (Ø12-Ø32); Wear Resistant Material (Ø40-Ø100) 15 O-Ring NBR 16 Retaining Ring Spring Steel 17 Block V Seal NBR 18 Front Cap Aluminum Alloy Stroke 100mm, No Magnet Stroke 100mm, With Magnet Stroke >100mm, No Magnet Stroke >100mm, With Magnet 3

Actuators - Compact Cylinders Dimensions (mm) Ø12, Ø16 No Magnet Magnet Ø20, Ø25 No Magnet Magnet Ø32 - Ø100 (Stroke 100) Ø32 - Ø100 (Stroke > 100) 4

Actuators - Compact Cylinders Dimensions (mm) Bore (mm) Stroke (mm) 12 16 20 25 32 40 50 63 80 100 A - - - - 49.5 57 71 84 104 123.5 B 25 29 36 40 45 53 64 77 98 117 C 15.5 20 25.5 28 34 40 50 60 77 94 D 5 6 8 10 14 14 17 17 22 27 E 3.4 3.4 5.2 5.2 5.2 5.2 6.8 8.5 10.3 10.3 F M3 X 0.5 M4 X 0.7 M5 X 0.8 M6 X 1.0 M8 X 1.25 M8 X 1.25 M10 X 1.5 M10 X 1.5 M16 X 2.0 M20 X 2.5 G 5-100 6 8 7 12 13 13 15 15 20 26 125+ - - - - 13 13 15 15 21 27 H 22 28 36 40 - - - - - - 20.5* 22* 24* 27.5* 30* 36.5* 38.5* 44* 53.5* 65* 5-50 31.5** 34** 36** 37.5** 40** 46.5** 48.5** 54** 63.5** 75** J 34* 75-100 - - 37.5 40 46.5 48.5 54 63.5 75 36** 125+ - - - - 62.5 72 73.5 75 86 97.5 K L 5-100 3.5 3.5 4.5 5 7 7 8 8 10 12 125+ - - - - 17 17 18 18 20 22 5-50 17* 18.5* 19.5* 22.5* 23* 29.5* 30.5* 36* 43.5* 53* 28** 30.5** 31.5** 32.5** 33** 39.5** 40.5** 46** 53.5** 63** 75-100 - - 29.5* 31.5** 32.5 33 39.5 40.5 46 53.5 63 125+ - - - - 45.5 55 55.5 57 66 75.5 M1 11 11 17 17 17 17 22 28.5 35.5 35.5 M2 3.5 3.5 7 7 7 7 8 10.5 13.5 13.5 M3 - - - - 17 17 22 27 32 33 N R 5-100 - - - - - - - - - - 125+ - - - - 12 12 13 13 15 17 5-100 6.5 6.5 9 9 9 9 11 14 17.5 17.5 125+ - - - - - - - - - - R1 M4 X 0.7 M4 X 0.7 M6 X 1.0 M6 X 1.0 M6 X 1.0 M6 X 1.0 M8 X 1.25 M10 X 1.5 M12 X 1.75 M12 X 1.75 S 5-100 - - - - - - - - - - 125+ - - - - 22 28 35 35 43 59 T 6 8 10 12 16 16 20 20 25 32 U M5 X 0.8 M5 X 0.8 M5 X 0.8 M5 X 0.8 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT 3/8 NPT 3/8 NPT 7.5* 8* 9* 7.5* 9* 14* 5 11 11 16 20 9** 9.5** 9.5* 10.5** 10.5** 15** V1 7.5* 8* 9* 10-100 11 10.5 11 10.5 15 16 20 9** 9.5** 9.5** 125+ - - - - 12.5 14 14 16.5 19 23 5* 6.5* 9* 9* 5 5.5 5.5 5.5 8 14 17.5 7** 7.5** 10.5** 10.5** V2 5* 10-100 5.5 5.5 5.5 7.5 8 10.5 10.5 14 17.5 7** 125+ - - - - 12.5 14 14 16.5 19 23 * No Magnet ** With Magnet 5

Actuators - Compact Cylinder Accessories Clevis Brackets for MACQ Series Ø32 - Ø100 Ø12 - Ø25 Model A B C D E F G H F-MACQ-12-CB 4.5 25 15.5 5.3 9.8 5 20 14 F-MACQ-16-CB 4.5 29 20 6.8 11.8 5 21 15 F-MACQ-20-CB 6.5 36 25.5 8.3 15.8 8 27 18 F-MACQ-25-CB 6.5 40 28 10.3 19.8 10 30 20 F-MACQ-32-CB 6.5 45.5 34 18.3 35.8 10 30 20 F-MACQ-40-CB 6.5 53.5 40 18.3 35.8 10 32 22 F-MACQ-50-CB 8.5 64.5 50 22.3 43.8 14 42 28 F-MACQ-63-CB 10.5 77.5 60 22.3 43.8 14 44 30 F-MACQ-80-CB 12.5 98.5 77 28.3 55.8 18 56 38 F-MACQ-100-CB 12.5 117.5 94 32.3 63.8 22 67 45 Male Adapter includes jam nut (cylinder not included) Male Adapter for MACQ Series Model A B C D E F G F-MACQ-12-A 8 6 M5 X 0.8 14 10.5 4 5 F-MACQ-16-A 10 8 M6 X 1.0 15.5 12 5 6 F-MACQ-20-A 12 10 M8 X 1.25 18.5 14 6 8 F-MACQ-25-A 17 12 M10 X 1.25 22.5 17.5 6 10 F-MACQ-32-A 19 16 M14 X 1.5 28.5 21.5 8 14 F-MACQ-40-A 19 16 M14 X 1.5 28.5 21.5 8 14 F-MACQ-50-A 27 20 M18 X 1.5 33.5 25.5 11 17 F-MACQ-63-A 27 20 M18 X 1.5 33.5 25.5 11 17 F-MACQ-80-A 32 25 M22 X 1.5 43.5 33.5 13 22 F-MACQ-100-A 36 32 M26 X 1.5 43.5 31.5 13 27 Rod Clevis Brackets for MACQ Series Model A B C D E F G F-MACQ-12-Y 22 16 5 +.048/-0 9 5.3±0.1 6 10 F-MACQ-16-Y 28 21 5 +.048/-0 11 66±0.1 11 12 Ø12 - Ø25 Ø32 - Ø100 F-MACQ-20-Y 34 25 8 +.058/-0 15 8.3±0.1 8.5 16 F-MACQ-25-Y 41 30 10 +.058/-0 19 10.3±0.1 10.5 20 F-MACQ-32-Y 42 30 10 +.058/-0 22 18.4±0.1 16 22 F-MACQ-40-Y 42 30 10 +.058/-0 22 18.4±0.1 16 22 F-MACQ-50-Y 56 40 14 +.07/-0 28 22.4±0.1 20 28 F-MACQ-63-Y 56 40 14 +.07/-0 28 22.4±0.1 20 28 F-MACQ-80-Y 71 50 18 +.07/-0 38 28.4±0.1 23 38 F-MACQ-100-Y 79 55 22 +.084/-0 44 32.4±0.1 24 44 Model H J AA AB AC AD AE AF F-MACQ-12-Y M5 X 0.8-5 -.03/-.06 4 1.5 10.2 0.7 14.6 F-MACQ-16-Y M6 X 1.0-5 -.03/-.06 4 1.5 12.4 0.7 16.8 Pin and male adapter (shown above) included with all Rod Clevis Brackets F-MACQ-20-Y M8 X 1.25-8 -.04/-.076 7 1.5 16.2 0.9 21 F-MACQ-25-Y M10 X 1.25-10 -.04/-.076 8 2 20.2 1.1 26.4 F-MACQ-32-Y M14 X 1.5 36 10 -.04/-.076 8 2 36.2 1.1 42.4 F-MACQ-40-Y M14 X 1.5 36 10 -.04/-.076 8 2 36.2 1.1 42.4 F-MACQ-50-Y M18 X 1.5 44 14 -.05/-.093 12 2 44.2 1.1 50.4 F-MACQ-63-Y M18 X 1.5 44 14 -.05/-.093 12 2 44.2 1.1 50.4 F-MACQ-80-Y M22 X 1.5 56 18 -.05/-.093 15 2 56.2 1.7 63.6 F-MACQ-100-Y M26 X 1.5 64 22 -.065/-.117 19 2.5 64.2 1.7 72.6 6

Actuators - Track Mounted Switches Two-Wire Reed Switches Model Number Description MCS1-G-050 2-wire reed switch; 5 meter leads MCS1-G-C08 MCS1-G-C12 2-wire reed switch; M8 male quickconnect; 150mm wire length 2-wire reed switch; M12 male quickconnect; 150mm wire length How to Order Three-Wire Solid State Switches Model Number Description MDS1-GN-050 3-wire solid state switch; 5 meter leads; NPN (sinking) MDS1-GN-C08 3-wire solid state switch; M8 male quick-connect; 150mm wire length; NPN (sinking) MDS1-GN-C12 3-wire solid state switch; M12 male quick-connect; 150mm wire length; NPN (sinking) MDS1-GP-050 3-wire solid state switch; 5 meter leads; PNP (sourcing) MDS1-GP-C08 3-wire solid state switch; M8 male quick-connect; 150mm wire length; PNP (sourcing) MDS1-GP-C12 3-wire solid state switch; M12 male quick-connect; 150mm wire length; PNP (sourcing) Specifications Item/Type MCS1-G MDS1-GN MDS1-GP Switch Logic SPST Normally Open Transistor without contact, Normally Open Type Sensor Type Reed Switch with Contact NPN Type PNP Type Operating Voltage (V) 5-240V AC/DC 5-30V DC Max. Switching Current (ma) 100 200 Switching Rating (W) 10 Max. 6 Max. Current Consumption - 15mA Max. @ 24V Voltage Drop 2.5V Max @ 100mA DC 0.5V Max. @ 200mA DC Cable Ø2.8, 2C, Gray Oil Resistant PVC (Flame Retardant) Ø3.3, 3C, Black Oil Resistant PVC Indicator LED Leakage Current - 0.01mA Max. Sensitivity (Gauss) 60-75 60-75 Max. Frequency (Hz) 200 1000 Shock (m/s²) 300 500 Vibration (m/s²) 90 Temperature Range ( C) -10 to 70 Enclosure Classification IP67 (NEMA6) Protection Circuit None Power Reverse Polarity, Surge Suppression Dimensions (mm) Wiring Diagrams 2 Wire Reed Switch 3 Wire Solid State NPN 3 Wire Solid State PNP 7

Your stocking distributor is: Mead Fluid Dynamics 4114 North Knox Avenue Chicago, IL 60641 Phone: 773-685-6800 Toll Free: 877-MEAD-USA Fax: 773-685-7002 Email: sales@mead-usa.com www.mead-usa.com Bimba Manufacturing Headquarters P.O. Box 68 Monee, Illinois 60449-0068 Phone: 708-534-8544 Toll Free: 800-44-BIMBA Fax: 708-235-2014 Email: cs@bimba.com www.bimba.com BIMBA BRANDS I ACRO I MEAD I MFD I PNEUMADYNE I TRD PNEUMATIC ELECTRIC HYDRAULIC ACTUATORS FITTINGS MANIFOLDS VALVES AIR PREPARATION SAFETY & PRODUCTION Worldwide distribution means there is a professional stocking Bimba distributor nearby ready to service your needs. Copyright 2014 Bimba Manufacturing Company. MFD-GB-1014 Effective October, 2014. All Rights Reserved.

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback