Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto strut profile x Incl. toothed belt drive; additional notes on the drive concept (p. 1-44) 009 F y max F z max M x max M y max M z max v max M max 10 N 0 N 1, Nm 0,4 x Nm 0,7 x Nm m/s 9, / 7, Nm L x + L H 0 M max 9, Nm 1, 1, 00944 11 L H + +1 11 000 Technical data See pages 1-7 for notes on layout and drive Complete axis LFS L H / +0 L H 7 4 99 49 / L H / 10 00 Bosch Rexroth G, 4 9 (017-0)
Linear guides MGE 1. 1-7 Cam roller guide LFS components 1 Components for the individual assembly of cam roller C D K B guides, with or without drive Parts list for cam roller guide LFS without drive 4 E L M Component No. Qty. Page Profile x 4 9 70 / 1-41 B Guide profile LFS 4 99 9 / 1 1- C Trolley profile LFS 4 99 01 / 1 1- F D Cover cap LFS 4 1-9 E Guide bearing LF 4 4 1- F Cover cap x 4 4 7-41 K Cylinder bolt Mx0 DIN794 n 1) 7 L T-nut M, mm slot 4 0 n 1) -4 9 197 M Sliding block 4 14 77 n 1) 1-1) For identification see page 1- Parts list for cam roller guide LFS with drive 11 C J E B K I H L M Component No. Qty. Page Profile x LF LF 4 99 0 / 1-41 B Guide profile LFS 4 99 9 / 1 1- C Trolley profile LFS 4 99 01 / 1 1- E Guide bearing LF 4 4 1- G Drive head LFS 4 4 1 1-9 H Return head LFS 4 411 1 1- I Toothed belt LFS 4 994 9 / ) 1 1- J Belt connector LFS 4 1- K Cylinder bolt Mx0 DIN794 n ) 1 1 14 1 G L T-nut M, mm slot 4 0 n ) -4 17 M Sliding block 4 14 77 n ) 1-1 1) L x - + ) For identification see page 1-19 1977 0 1, 1, 19 Bosch Rexroth G, 4 9 (017-0)
1- MGE 1. Linear guides l y l z 1, kg/m mm 1, cm4, cm4 1949 a 0 n x 0 a - (n x 0) a a...mm z y, 1, 1 Guide profile LFS with integrated guide rods Installation on MGE strut profiles with mm slot or directly on a flat surface Guide profile LFS 1 pcs 10 000 4 99 9 / pcs 000 4 9 41 Guide profile: aluminum, anodized Guide rod: Solid shaft V, induction hardened, polished Condition on delivery: Required accessories: Ungreased guide rods; greasing according to assembly instructions 4 7 Cylinder bolt DIN 794 Mx0 T-nut M, mm slot 4 0 (p. -4) DIN 794 - Mx0 Sliding block as a centering aid for mounting the guide profile in a mm profile slot Sliding block No. 0 4 14 77 4 0 P; black 190 0,1 kg C, kn C 0, kn 009,, 7, 1 1 +1-1 Guide bearing for trolley construction Guiding via guide rod Rollers with ball bearings, permanently lubricated Lubricating felts with guide rod lubrication reservoir Play-free roller adjustment via eccentric bolts Guide bearing No. FS LF 4 xfs1 FS1 ISO 47 Mx Housing: diecast aluminum Roller: steel, hardened, polished Scope of delivery: incl. fastening material (FS) Condition on delivery: lubricating felts ungreased; greasing according to assembly instructions 4 7 Trolley profile for the construction of trolley LFS 7 z y Trolley profile LFS 10 000 4 99 01 / aluminum, anodized l y l z, kg/m 14 mm,9 cm4 74, cm4 ø4,9 1, 009 Bosch Rexroth G, 4 9 (017-0)
Linear guides MGE 1. 1-9 7 Cover cap for trolley profile LFS For use on trolleys which are not driven by a toothed belt 1 0099 ø Cover cap No. FS LFS 4 xfs P; black FS 4 ISO 700,x19 Drive head for transferring drive torque to a toothed belt For direct mounting of a motor or (in conjunction with a center shaft) for mounting a hollow shaft gear or a 7 7 0097 11 ø19h7 H Pb 1, Ph 7 1, kg P b x P h : x coupling (p. 1-4) Mounted with longitudinal end connector directly on profile x Profile finishing: LF blind hole drilling for longitudinal end connector Drive head No. FS LFS Scope of delivery: FS ISO 70 Mx aluminum, anodized Hollow shaft: steel; galvanized Caps: P; black 4 4 xfs, incl. fastening material (FS), cover caps DIN 49 M 9 11 1 1 14 1 17 1 19 0 1 Bosch Rexroth G, 4 9 (017-0)
1- MGE 1. Linear guides Return head for tensioning the toothed belt and changing its direction Mounted directly on profile using longitudinal end connector Profile finishing: LF blind hole drilling for longitudinal 7 11 Ph 7 Return head No. FS LFS end connector Scope of delivery: aluminum, anodized Hollow shaft: steel; galvanized Caps: P; black 4 411 xfs, incl. fastening material (FS), cover caps Pb 1, kg P b x P h : x FS ISO 70 Mx DIN 49 M 00 1, Belt connector for fixing the toothed belt on the front of the trolley ll connecting parts for mounting on the trolley profile LFS are included ø, Belt connector No. FS 009 0, kg 7 LFS 4 xfs, xfs aluminum, painted black Scope of delivery: incl. fastening material (FS) FS DIN 794 Mx -FSt ISO M FS DIN 700 Mx0 -FSt Toothed belt as a trolley drive 1,,7 Pitch: T Toothed belt L LFS 00 0000 4 994 9 / L 1) 0000 4 1 4 L n x mm 1) L x - + 0,0 kg/m PU with embedded steel wires 1974 Bosch Rexroth G, 4 9 (017-0)