Pneumatic High Temperature Clamps and Grippers
|
|
- Leonard Burke
- 5 years ago
- Views:
Transcription
1 Cam Type Gripper for Tubes Cam type gripper for handling of hot formed tubes. page 14.4 New products 14.0
2 Notes
3 high temperature clamps and grippers are designed for applications in high ambient temperatures where standard elements would not withstand this environmental conditions. The maximum temperature range you find in details on the related catalogue pages. The elements are designed for millions of cycles. Model-no. Clamping force/ Clamping torque Page 84A2-VB000H1H2 360N A3-1R 300 N-750 N MRM 55 Nm MRM 390 Nm 14.1
4 Series 84A2-VB Cam Type Gripper, self-locking for application in hot forming divisions Roller and cam principle, self locking at end stop position Cylinder diameter 25 mm Model 82A2-VB000H1H2 Air consumption per double stroke: 0,3dm3 Air connectors G 1/8 Gripper teeth ceramic material adjustable to metal sheet Application: Gripping of hot metal sheets for transporting in hot forming stations thickness Heat protection of structure with screening sheet Seals and lubrication are high temperature resistant Features: Small size, lightweight Fast opening and closing action Maximum working temperature 210 C Test conditions: Gripper clamps a 900 C heated sheet metal for 2:30 Min. and may not achieve max. operating temperature High clamping force Long life cycle Model 84A2-VB000H1H2 View Model no. Clamping force Opening angle Weight Opening/Closuretime at 5 bar [N] [kg] min [s] 84A2- VB000H1H upper 0,72 0,6 Major spare parts: Accessories for 84A2-VB000H1H2: Adaptor Specification Order no. 8MA MA MA Cylinder 8PW Seal kit Gripper tooth kit 8PW-074-VT1 8JZ MA ZB
5 Opening Angle Distance of gripper feeth must be adjusted by shims to metal sheet thickness Metal Sheet Gripper for Hot Forming Air connector View X Medium air, min. 3bar, max. 6 bar. Operation permissible with oil-free air 14.3
6 Series 84A3-1R Cam type gripper for handling of hot formed tubes Applications: Gripping and handling of hot formed tubes Features: Small size, lightweight Fast opening and closing action High gripping force Long life cycle Model 84A3-1R Order-Code for 84A3-1R Cylinder diameter 32 mm Air connectors G1/8 Special ceramic gripper teeth Seals and lubrication are high temperature resistant Maximum workpiece temperature 1000 C Application example Order-No. example 84A3 1R A3-1R = without sensor 0 = without accessories 28 = Ø F3 = two sensors SME-8F-DE 3 wire, 2,5 m open end 35 = Ø A3-1R_ = Air connector 2 x G1/8 Base model contains gripper teeth 42 = Ø F4 = Two sensors SME-8F-DE-S wire with plug M8x1, 3-pin 50 = Ø Base model Gripper arms Sensors Adaptors 14.4
7 Gripper for Tubes Connectors Important: Operation is only permissible with an installed external controlled unidirectional shut off valve at connector 1 Medium air, min 3 bar, max 6 bar. Operation permissible with oil-free air Model-No. Tube Gripping force at 5 bar Piston Air consumption per Weight Opening-/Closure Werkpiece L1 L2 H1 H2 R Ø double stroke at 5 bar ~ time Temperature max. ~ min. max. ~ Ø (dan) (mm) (Liter) (kg) sec. C ~ open open 84A3-1R Ø28=100 / Ø31=75 / Ø35= A3-1R Ø35=95 / Ø38=65 / Ø42= ,5 1,7 0,4 < A3-1R Ø42=105 / Ø36=70 / Ø50= A3-1R Ø50=80 / Ø55=50 / Ø60= External contolled unidirectional shut off valve Diagram for connector 1 Spare parts Accessories: Description Order-no. Description Order-no. Seal kit 8PW VT1 with two proximity switch SME-8F-DE Gripper tooth ( 1 piece ) 8JZ cable 3-wire, 2,5 m with two proximity switch SME-8F-DE-S cable with plug M8x1, 3-pole Inductive linear sensor Turck-Order-No. (only order from Turck!) WiM40-STL68-LiU5X-V
8 Series 825-MRM, 991-MRM Automation power clamps for high temperatures, enclosed design Models: 991-MRM Application: Clamping, holding, gripping and positioning of components and tools. Key areas of application: The power clamp is designed for applications at permanent ambient temperatures of 260 C and briefly (up to 10 minutes) at ambient temperatures of 370 C. 991-MRM base model (without clamping arm) Features: dirt-resistant compact, enclosed design in a steel body 2 lateral mounting areas toggle action mechanism cylinder with temperature-resistant polymer seals integrated lubricating nipples for greasing the mechanical parts from the outside use of temperature-resistant grease Model no. Clamping Standard opening angle Driven shaft for Max. holding Clamping Cylinder Weight position clamping arm torque torque at 6 bar Ø ~ variants [Nm] [Nm] [mm] [kg] 991-MRM horizontal 118 lateral and U-central ,3 14.6
9 Automation power clamps for high temperatures 991-MRM with U-type central clamping arm 991-MRM with lateral clamping arm (right) Accessories for 991-MRM Specification structural component Order no. for set 991-MRM Clamping arm Clamping arm variant Clamping position U-central horizontal 8JG lateral horizontal 8JG Grease Accrotube 2000HT from Accroseal (USA) Spare parts Specification Order no. for structural component 991-MRM Cylinder M-ET Seal kit ET 14.7
10 Series 825-MRM, 991-MRM 991-MRM If the power clamp is used in high-temperature environments, apply temperature-resistant grease once every month. Use the lubricating nipples that belong to the standard scope of delivery. Technical data: 825-MRM/991-MRM Model no. A B C D D1 E F G H I J J1 Ø Ø 991-MRM G3/ , ,2 _ 76 9,5 10,0 Model no. K L M N O P T U V W Y Y1 991-MRM
11 Automation power clamps for high temperatures 14.9
Pneumatic Power Clamps
15.61 Pneumatic Power Clamps Series 82M-6 Product Overview (last time in catalog) Features: modular design shielded body, dirt-resistant compact design high holding torques long life cycle low weight (aluminium
More information82L Series. Pneumatic Power Clamps Ordering Information 03 B8 H 82L 2G B PC-PPC-15. Base Model Size Description 2G 3G 3N 4G 4N
82L..-2... Series Pneumatic Power Clamps Ordering Information 82L 2G B -2 3 B8 H Base Size Description Arm Style Description 2G 3G 3N 4G 4N Ø25 (G1/8) Cylinder Bore Size Ø32 (G1/8) Cylinder Bore Size Ø32
More informationNOMENCLATURE. Optional: V = Viton FKMsealing. RÖHM Z centric gripper Pneumatic. Sizes A = Alternative jaw fixture by tongue and groove
NOMENCLATURE RZP -A - 100-1 / GA / V RÖHM Z centric gripper Pneumatic A = Alternative jaw fixture by tongue and groove Sizes 64-300 Jaw stroke variant 1 = long stroke 2 = short stroke Optional: spring
More informationPRODUCTS FOR ROTATIONAL MOLDERS. Product Catalog. destaco.com
PRODUCTS FOR ROTATIONAL MOLDERS Product Catalog 2 A Global Presence Netherlands Charlevoix, MI USA UK Red Wing, MN USA Wheeling, IL USA Auburn Hills, MI USA France Germany Spain China Brazil India Thailand
More informationPin Packages Section.Page. Series. Dimensions and technical information are subject to change without notice. Air Consumption at 5 bar [dm3]
Pin Packages 6. Pushing Force (N) at 5 bar Retracting Force at 5 bar Piston Diameter Weight Air Consumption at 5 bar [dm3] Application Area Series Section.Page 0 to 500 [N] 500 to 000 [N] 000 to 500 [N]
More informationPWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.
PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary
More informationFlexible. Light. Productive. LEG Long-stroke Gripper
LEG Flexible. Light. Productive. LEG Long-stroke Gripper Light long-stroke gripper for flexible and highly dynamic handling of various components Field of Application For use in a clean working environment,
More informationNumber of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
More informationGripping rotary modules.
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More information86P40-2, 86P60-2 Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information
86P40-, 86P60- Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information Application: Accurate positioning of sheet metal parts in welding equipment and handling systems. At the
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationProduct Information. Long-stroke gripper PHL 32
Product Information PHL 32 PHL Flexible. Precise. Powerful. PHL long-stroke gripper 2-finger parallel gripper with large jaw stroke for large parts and / or a broad range of parts Field of application
More informationWedge clamps
Wedge clamps Wedge clamps for dies with tapered clamping edge Without position monitoring up to 160 C* 2.24000 With position monitoring lateral fastening up to 100 C** 2.24001 With position monitoring
More informationModular. Compact. Loadable. HLM Stroke Module
HLM Modular. Compact. Loadable. HLM Stroke Module Linear module with optimized overall length, pneumatic drive and scope-free pretensioned junction rollers. Field of Application For lifting of workpieces
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationElectric pump EP-1. Electric pump with 1.9 kg reservoir:
The BEKA-MA central lubrication pump model EP-1 is electrically actuated and has up to a maximum of independently operating lubricant outlets. A separate pump element is required for each outlet. Three
More informationCam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationProduct Information. Rotary gripping module with angular gripper RW
Product Information RW RW Flexible. Modular. Compact. Gripper Swivel Module RW Rotary gripper combination, consisting of a rotary module and a 2-finger angular gripper Field of application Gripping and
More informationFor material handling and clamping of small workpieces
For material handling and clamping of small workpieces Power Clamp Cylinder New ø25, ø32 Compact Type INFORMATION 34 mm Lightweight Compact High clamping force Lock function 53 mm Lightweight Weight :
More informationHydraulic pump HP-1. Type 1. Type 2
The BEKA-MAX central lubrication pump model HP-1 is hydraulic actuated and has up to a maximum of independently operating lubricant outlets. A separate pump unit is required for each outlet. Three pump
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationPZN-plus Application example Pneumatic 3-Finger Centric Gripper Universal Gripper Stroke per finger 2 mm 35 mm
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
More informationSwivel Unit. elektrical
Swivel Unit elektrical Table of contents Swivel Units elektrical Order No. Swivel angle Torque Page [ ] [Nm] Product Information 6 DEF60 min. 30 - max. 330 1,6 10 Order No. Swivel angle Torque max. Page
More informationWIDE OPENING PARALLEL GRIPPER
News 2001 S E R I E S CGL Wide Opening Parallel Gripper Series CGL Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The wide opening parallel gripper mod. CGL is available in 5 different sizes and has
More informationCam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationGWS. Application example. Tool Changing Gripper Change System. Handling weight up to 170 kg. Moment load M x up to 400 Nm
GWS Sizes 064.. 125 Handling weight up to 170 kg Moment load M x up to 400 Nm Moment load M y up to 400 Nm Moment load M z up to 600 Nm Application example Replacing and placing tools in a gripper changing
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More informationCompact. Fast. Productive. DRL Lift/Swivel Unit
DRL Compact. Fast. Productive. DRL Lift/Swivel Unit Compact lift/swivel unit consisting of a strong short-stroke cylinder and a rack pinion swivel drive. Field of Application For use in clean and slightly
More informationLinear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
More informationAGE-S. Application example. Compensation XYZ Compensation Units Heavy Loads. Payload up to 100 kg. Compensation path XY up to ± 14 mm
AGE-S Sizes 100.. 200 Payload up to 100 kg Compensation path XY up to ± 14 mm Compensation path Z up to 12 mm Application example Picking up and setting down components from a rack with a 3-finger centric
More informationPassive guide axes DGC-FA, without drive
Key features At a glance Driveless linear guide units with guide and freely movable slide The passive guide axis is designed to support force and torque capacity in multi-axis applications Higher torsional
More informationROTARY MODULES. Rotary modules
Rotary modules Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM 110 182 RM 200 184 RM 310 186
More informationbl 8 bm 1Robust, lightweight housing - hard coated aluminium alloy
2-Jaw Parel Series GP4X pneumatic Product information: Overlapping, extremely robust T-Slot guide for maximum force and moment resistance Gripper jaws made of ground surfaced and hardened steel ensuring
More informationPrecise. Modular. Compact. CLM Compact Slides
CLM Precise. Modular. Compact. CLM Compact Slides Optimized length, with pneumatic drive and pre-loaded crossed roller bearings, free from play. Field of Application For use in assembly automation; e.g.
More informationLight. Fast. Flexible. SGW Small Components Gripper
SGW Light. Fast. Flexible. SGW Small Components Gripper Small, simple pressurised plastic angular gripper with spring return Field of Application Universal application in clean and slightly dirty environments,
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More informationHydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic screw-in cylinder, single action Operating pressure max. 350 bar / min 100 bar These hydraulic crew-in cylinder are single acting and with spring retraction. They can
More informationStandard gripper Series GSP
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Standard gripper Series GSP Technical Data Products Series GSP-P
More informationPGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
More information: 660 N. For material handling and clamping of small workpieces. CKZT25 -X2797 (Base Type) Power Clamp Cylinder INFORMATION. ø
For material handling and clamping of small workpieces INFORMATION Power Clamp Cylinder ø25 Compact Type 34 mm Lightweight Compact High clamping force Lock function 53 mm Lightweight Weight : 580 g Compact
More informationSolenoid interlocks AZM 170 range. 98 Schmersal 22 8,2 60. ø4,2. ø Pg 11
2.4 AZM 170 range Features Thermoplastic enclosure Compact design Manual release Long life Double insulated X High holding force 1,000 N N latching force Cut clamp termination Actuation on de-energisation
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More information2-Finger Parallel Gripper KGG
Translation of the original manual 2-Finger Parallel Gripper KGG 60-20... 140-60 Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted
More informationElectric Pump EP-1. Electric pump EP-1 with steel reservoir and pump element PE-120 V with manometer:
The BEKA-MAX central lubrication pump model type EP-1 is electrical actuated and has a maximum of independently operating lubricant outlets. The pump is delivered with one pumping element as a standard,
More informationPosition switches FD series
Position switches FD series Selection diagram 01 08 11 18 19 02 04 05 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fibber glass rod gasket sphere sphere 51 52 5 56 41 42 adjustable lever
More informationGrippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
More informationPrecise. Compact. Reliable. MPZ Small Components Gripper
MPZ Precise. Compact. Reliable. MPZ Small Components Gripper Small 3-finger centric gripper with base jaws guided on T-slots Field of Application F or universal use in clean to slightly dirty working environments,
More informationLinear Axes Technical Data Summary
components Technical Data Summary Pneumatic Axes Electrical Axes LM 6 P LM 8 P LM 8 PV LM 10 P LM 6 PE LM 8 PE LM 8 PEV LM 10 PE Standard stroke lengths [mm]: h 0-150 Overall length [mm]: L 408 468 468
More informationGRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Body made
More information2-Finger-Parallel-Gripper PFH
Translation of the Original Manual 2-Finger-Parallel-Gripper PFH 150-300 Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted property
More informationPWG. Application example. Pneumatic 2-Finger Angular Grippers Universal Angular Grippers. Sizes Gripping moment 6 Nm..
PWG Sizes 65.. 230 Weight 0.33 kg.. 16.3 kg Gripping moment 6 Nm.. 934 Nm Opening angle per finger 20 Workpiece weight 1.1 kg.. 43 kg Application example Rotary feed unit for shafts PWG 130-B 2-Finger
More information-U- Type discontinued. -H- Note. Available up until Angle grippers HGWC Key features
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationLinear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
More informationTWO-LINE ELECTRIC CHANGE-OVER VALVE
TWO-LINE ELECTRIC CHANGE-OVER VALVE DPE APPLICATION Two-line electric change-over valves are necessary components of two-line central lubrication system circuits. They are usually connected after lubrication
More information3-finger centric gripper JGZ
Translation of the Original operating manual 3-finger centric gripper JGZ 40-160 Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationRodless Pneumatic Cylinders Series OSP-P
Rodless Pneumatic Cylinders Series OSP-P Contents Description Data Sheet No. Page Standard Cylinders Overview 1.10.001E 9-13 Technical Data 1.10.002E-1 to 3 15-17 Dimensions 1.10.002E-4 to 9 18-23 Order
More informationSizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm kg. PZH-SF Finger Centric Gripper
Sizes Weight Gripping moment Angle per jaw Workpiece weight Pieces : 1 20 kg 180 Nm 59.7 8 kg Application example PZH-SF 350 3-Finger Centric Gripper Gamma Gantry Linear Module Gamma Gantry Linear Module
More informationMotion without compromise
Toothed belt and spindle axes ELGA Clean, protected, strong Motion without compromise Highlights Protected: insensitive to harsh ambient conditions Clean: virtually no particle emissions for use in cleanrooms
More informationToothed belt axes DGE
Toothed belt axes DGE Toothed belt axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching
More informationPNEUMATIC LINEAR ACTUATORS SECTION 1
PNEUMATIC LINEAR ACTUATORS SECTION 1 1-888-638-6337 Typical Applications: Larger versions of these examples are available on the CD-ROM version of our catalog or on our web site: www.meto-fer.com Subject
More informationOperating Instructions. Handling Components Grippers GPU / GPUI BA ENGLISH
Operating Instructions Handling Components Grippers GPU / GPUI BA-100008 ENGLISH Edition: 10/2005 Operating Instructions GPU / GPUI Change index Previous editions: Edition Note Reference number 10/2005
More informationModular. Precise. Robust. AGE-S-XYZ Compensation Unit
AGE-S Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
More information-H- Note. Feed separators HPV Key features at a glance. Separation of workpieces in the supply process
Key features at a glance Separation of workpieces in the supply process Previously Required at least 2 drives, 2 valves and 4 proximity sensors Extensive programming required Today One unit (1 drive, 1
More informationLEG. Application example. Electrical 2-Finger Parallel Gripper Long-stroke Gripper. Gripping force 1050 N 1500 N. Weight 9 kg 11.
LEG www.comoso.com Size 760 Weight 9 kg 11.6 kg Gripping force 1050 N 1500 N Stroke per finger 281 mm Workpiece weight 15.75 kg 22.5 kg Application example Gripping unit for top loading and palettizing
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationOPTIMAL COMPONENT SUPPORT. Optimal support of components for every application, e.g. crankshaft machining.
OPTIMAL COMPONENT SUPPORT Optimal support of components for every application, e.g. crankshaft machining 6150 SELF-CENTERING STEADY RESTS With self-centering steady rests, RÖHM makes an important contribution
More informationRoller guide actuators - SQ ZST
Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple
More informationORIGA SYSTEM PLUS OSP-P
ORIGA SYSTEM PLUS OSP-P The ORIGINAL rodless pneumatic cylinders A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility. The
More informationONE WORLD. ONE CLAMP. YOUR WAY. The Most Flexible and Complete Family of Clamps. 82M-3E Series Enclosed Power Clamp. destaco.com
ONE WORLD. ONE CLAMP. YOUR WAY. The Most Flexible and Complete Family of Clamps 82M-3E Series Enclosed Power Clamp destaco.com 2 A Global Presence Netherlands Charlevoix, MI USA UK Red Wing, MN USA Wheeling,
More informationLinear drives DGC-HD, with heavy-duty guide
Linear drives DGC Key features At a glance New heavy-duty design for: Maximum loads and torques thanks to duo rail guide Long service life Ideal as a basic axis for linear gantries and cantilever axes
More informationSwiveling gripper finger GFS 16-40
Translation of the original manual Swiveling gripper finger GFS 16-40 Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted property
More informationModular. Precise. Robust. AGE-S-XYZ Compensation Unit
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction. Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationMagnetic Sizes mm
CATALOGUE > Release 8.7 > Series CGB guided parallel grippers Series CGB guided parallel grippers Running out of stock Magnetic Sizes 6-20 - 25-32 mm»» Guided mechanism which allows high repeatability»»
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationRodless Pneumatic Cylinders Series OSP-P
Rodless Pneumatic Cylinders Series OSP-P Contents Description Data Sheet No. Page Standard Cylinders Overview P-1.10.001E 9-13 Technical Data P-1.10.002E-1 to 3 15-17 Dimensions P-1.10.002E-4 to 9 18-23
More informationSmall gripper with large stroke KGG
Translation of the original manual Small gripper with large stroke KGG 220-280 Assembly and Operating Manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted
More information-H- Note. Angle grippers HGWC Key features. 2 Internet:
Key features At a glance General information The compact and cost-optimised angle gripper consists of a two-part mirrorsymmetrical housing made of die-cast zinc. The force generated by the linear motion
More informationORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
More informationMiniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
More informationELECTRIC ACTUATOR MOD. VB015 MAINTENANCE AND INSTALLATION INSTRUCTIONS OF VALBIA ELECTRIC ACTUATORS
ELECTRIC ACTUATOR MOD. VB015 MAINTENANCE AND INSTALLATION INSTRUCTIONS OF VALBIA ELECTRIC ACTUATORS TABLE OF CONTENTS 1.0 - WARNINGS 2.0 - GENERAL DATA 2.1 - Technical characteristics 2.2 - Data on electrical
More informationRotary-Linear Actuator HSE4 Hydraulic / 100 Bar
Rotary-Linear Actuator HSE4 Hydraulic / 100 Bar 4 Function and features K A1 G1 B1 G2 KM Y B2 RE A2 Z S2 A S1 W B KS [ Operation ] [ Operating pressure ] The Eckart rotary-linear actuator HSE4 is a combination
More informationPowerful, durable and quick to mount. Magnetic and cylinder sensors from ifm electronic.
Powerful, durable and quick to mount. Magnetic and cylinder sensors from ifm electronic. Magnetic sensors, cylinder sensors www.ifm.com/gb/cylindersensors fluid sensors and diagnostic systems position
More informationSlide units SPZ, twin piston
Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits www.festo.com
More informationLinear guides MGE 13.2 Linear guides
13-2 MGE 13.2 Linear guides Linear guides For constructing linear guides based on cam roller guides Cam roller guides are suitable for applications with high speeds and medium loads, in particular for
More informationTPCA Power Clamps Catalog
TPCA Power Clamps Catalog Pneumatically Operated, Weld-Contamination Sealed, Heavy Duty Power Clamps > Degree of arm opening can be adjusted from -12 > One clamp for both dual or single arms > Uses TRILOK
More informationLVE - with large through-hole
LV - with large through-hole Sizes 400-1000 For the machining of large and long pipes as frequently used in the oil and gas industry. Flange-type workpieces can of course, be chucked as well. A very reliable
More informationAssembly- and Operating Manual PGN-plus-P 2-Finger Parallel Gripper
Translation of the original manual Assembly- and Operating Manual PGN-plus-P 2-Finger Parallel Gripper Imprint Imprint Copyright: This manual is protected by copyright. The author is SCHUNK GmbH & Co.
More informationCylinders with integrated guide Series QCTF and QCBF
> Series QCTF - QCBF slide units CATALOGUE > Release 8.6 Cylinders with integrated guide Series QCTF and QCBF Double-acting, magnetic, with double bearings and flanges ø 20, 25, 32, 40 mm Magnetic sensors
More informationKLM. Application example. Linear modules Pneumatic Stroke module. 1 Single base support, SOE Adapter plate, APL 121
KLM www.comoso.com Sizes 25.. 100 Mass 0.5 kg.. 5.18 kg Driving force 50 N.. 294 N Stroke 25 mm.. 225 mm Repeat accuracy ± 0.01 mm.. ± 0.015 mm Application example 4 5 3 3 6 7 2 2 8 1 1 Pneumatic two-axis
More informationHG-F. Quick jaw change ma JAWS SYSTEM FORKARDT. For highest speeds Flat gripping force curve. Jaw change in less than 1 minute
Quick jaw change ma JAWS SYSTEM FORKARDT For highest speeds Flat gripping force curve 18 16 315 Mdmax. Jaw change in less than 1 minute F G total gripping force (3 jaws) (kn) 14 12 1 8 6 4 2 26 21 16 26
More informationSeparators. pneumatic
Separators pneumatic Table of contents separators VEG-B Order no. Stroke Force in Force in Page [mm] retract [N] extend [N] Product Information 6 VEG10-B 10 30 40 10 VEG14-B 20 65 80 12 VEG15-B 40 65
More information2-finger angular gripper PWG
Original operating manual 2-finger angular gripper PWG 65-230 Assembly and operating manual Superior Clamping and Gripping Imprint Imprint Copyright: This manual remains the copyrighted property of SCHUNK
More informationKämmer Actuators Series 4 Pneumatic and Electropneumatic
flowserve.com Kämmer Pneumatic and Electropneumatic Description Kämmer pneumatic actuators are widely known for their versatile diaphragm design, easy installation and simplified maintenance. When compared
More informationParallel grippers HGPL-B, heavy-duty with long stroke
Key features At a glance Sturdy The T-slot in combination with the long guide length allows for high forces and torques Space-saving Two parallel and opposing pistons move the gripper jaws directly and
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationLinear/swivel clamp CLR
Key features Functional description The linear/swivel clamp CLR is used for all types of clamping. Through the combination of the linear and swivel motion of the piston rod, it is possible to insert and
More informationStands. MC55 Cylinder-Operated Stand With Linear Bearings. R55-S Lever-Operated Stand. D54 Lever-Operated Stand For SD, DM6, 2DM6 Motors
Stands MC55 Cylinder-Operated Stand With Linear Bearings Part No. 902914 Weight: 70.4lb (32kg) Max. Stroke: 4 in. (100mm) Max. Mounting Plate Load: 150lb (68kg) 8.66 9.84 40.16 7.05 25.43 Max approx. 1.57
More information