Motors LV Product Lines African Motors Enery Automation Coatins
www.we.net W21 - Multivoltae Cast Iron Frame Motor Three phase asynchronous motor, with lower acquisition cost and hih technoloy. Easy to adapt to the most application types, allowin to your company aility durin installation, easy operation and low maintenance cost. The project is accordin to IEC34 standards, which uarantees hiher enery savins. The followin types of W21 motors are available: Standard Efficiency (EFF2), Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) and suitable for the use with Frequency Inverters. Motor Output: 0,12 up to 330kW Poles: II, IV, VI and VIII Frame: 63 up to 355 M/L Three-phase multivoltae, IP55, TEFC, 50Hz Pumps, fans, crusher, conveyors, machine tools, millin machines, centrifual machines, presses, elevators, looms, rinders, woodworkin, coolin, packain equipment, other severe duty application. * Notes: WISE System Efficiency Paintin Plan for Industrial Environments Cast Iron Frames State-of-the-art Ventilation System Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks*. Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) motors, uarantee a fast return of investment. Suitable for the use in slihtly severe and sheltered environments, with low averae humidity, reular temperature variations. More strenth for your application Uniform refrieration of the motor with sinificant temperature reduction in the external surface and bearins, uarantee hih performance and enery savin to your application. Product suitable to meet the most demanded applications in the industry. * Notes: Technical criteria for use of motors fed by inverters Motor rated Voltae V NOM 460V 460V < V NOM 575V System Standard Reinforced Voltae peak in the motor 1430V 1780V dv/dt Inverter outlet 5200 V/µs 6500 V/µs Rise Time(*) Of Inverter MTBP(*) Time between pulses 0,1 µs 6 µs Motors Product Lines
www.we.net W21 - Multimountin Aluminum frame motors WEG Aluminum frame motors with removable base were specially desined to meet market requirements in reference to mountin flexibility once they allow all mountin positions. The foot mountin system offers reat flexibility and it quite simply allows chanin on the mountin confiuration without requirin any machinin or modification on the motor feet. Motor terminal box can be rotated at 90 derees allowin motor leads to be connected on any motor side. Besides that, these motors are fully interchaneable with existin cast iron frame motors. Stock flexibility due to the fact that just one motor is required with mountin possibility on all positions. Aluminum version of W21 line. VFD Output: 0,12 up to 11kW Poles: II, IV, VI and VIII Frames: 63 up to 132 M Three-phase multivoltae, IP55, TEFC, 50Hz Pumps, air conditionin systems, fans, cranes, compressors, conveyor belts, machine tools, windin machines, drawin machines, centrifuals, presses, hoists, overhead cranes, elevators, looms, rinders, woodworkin, injectors, extruders, roller tables, coolin towers, packain machines, etc. Multimountin Aluminum Frame WISE system Efficiency Paintin Plan for Industrial Environments State-of-the-art Ventilation System Flexible and easy to chane mountin confiurations without the necessity of machinin operations or additional chanes to the motor feet. Better thermal dissipation Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks*. Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) motors, uarantee a fast return of investment. Suitable for the use in slihtly severe and sheltered environments, with low averae humidity, reular temperature variations. Uniform refrieration of the motor with sinificant temperature reduction in the external surface and bearins, uarantee hih performance and enery savin to your application. Product suitable to meet the most demanded applications in the industry. * Notes: Technical criteria for use of motors fed by inverters Motor rated Voltae V NOM 460V 460V < V NOM 575V System Standard Reinforced Voltae peak in the motor 1430V 1780V dv/dt Inverter outlet 5200 V/µs 6500 V/µs Rise Time(*) Of Inverter MTBP(*) Time between pulses 0,1 µs 6 µs Motors Product Lines 3
www.we.net Fan and Exhaust Motor suitable to the most demanded specifications of the OEM s ventilation customers. Can be supplied in versions: Pad, Foot or Flane mounted. Besides the mountin confiurations the motor can be also supplied with T-box and terminal block or without T-box and 1 meter of cable leads allowin remote assembly of the T-box. Motor Output: 0,12 up to 315kW Poles: II, IV, VI, VIII and two speed Frame: 63 up to 22 5 S/M PAD/FOOT and above only foot Three-phase multivoltae, IP55, 50Hz Totally Enclosed Fan Cooled (TEFC) or Totally Enclosed Air Over (TEAO) Fan and exhausters, tunnels, fan and exhaust systems in buildins, theaters, movie theaters and industries, subways, air conditionin systems, underround coal mines, shoppin centers, supermarkets and others. WISE System Efficiency Paintin Plan for Industrial Environments Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks. Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) motors, uarantee a fast return of investment. Suitable for the use in slihtly severe and sheltered environments, with low averae humidity, reular temperature variations. Product suitable to meet the most demanded applications in the industry. 4 Motors Product Lines
www.we.net Smoke Extraction Assure safety where a lare concentration of people in commercial and industrial facilities is present is one of the main concerns of desiners and company owners durin the project of shoppin centers, factories, warehouses, covered parkin lots, tunnels and other places which concentrate a lare number of people. The Smoke motors are certified* for hih temperatures and uarantee a rapid smoke and heat extraction and delay in fire propaation, allowin free access to the emerency exits. Lare buildins, shoppin malls, factories, warehouses, enclosed parkin lots, other ventilation systems. Duty Certification F200 F300 F400 S1-40 C S1 40ºC S1 40ºC S2* - 200 C - 2 hours S2* - 300ºC 1 hour S2* - 400ºC 2 hours Self Declaration BSRIA - U.K. Frames: 80 to 250 Also available certification for 300 C/2 hours BSRIA - U.K. Frames: 80 to 180 Outputs: 0.75kW 27kW CTICM - France Frames: 90 to 280 Pole:IV, VI, VIII, VI/IV, VIII/IV, VIII/VI poles Class Ins. Class F; Temp. Rise 80K Ins. Class H; Temp. Rise 80K or 105K Standard EN 12101-3 Pole / Frame sizes available II, IV/II pole (frame sizes 80 up to 315S/M) IV, VI, VIII, VIII/IV, VI/IV pole (frame sizes 80 up to 355M/L) Construction Totally Enclosed Fan Cooled (TEFC) or Totally Enclosed Air Over (TEAO) (foot or flane mounted / pad mounted for frame sizes 80 up to 250) * Continuously rated for normal ambient and emerency duty at rated temperature and time. WISE System Paintin Plan for Industrial Environments Cast Iron Frame State-of-the-art Ventilation System Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks. Suitable for the use in slihtly severe and sheltered environments, with low averae humidity, reular temperature variations. More strenth for your application Uniform refrieration of the motor with sinificant temperature reduction in the external surface and bearins, uarantee hih performance and enery savin to your application. Product suitable to meet the most demanded applications in the industry. Motors Product Lines 5
www.we.net Ex d The instalation of electric motors where flamable products are continuously handled, processed or storae, must comply with the most demanded safety standards in order to uarantee protection of life, machines and environment. Followin to the hihest safety standards WEG explosion proof motors are made of robust construction, modern system of flame retention with joint parts carefully desined, precision machinin in the T-box eliminatin imperfections in the joint parts and fixation with hih mechanical strenh bolts. Motor Output: 0,37 up to 315kW Poles: II, IV, VI, VIII and two speed Frame: 90S/L up to 355 M/L Three-phase multivoltae, IP55, TEFC, 50Hz Pumps, fans, crushers, conveyors, machine tools, millin machines, centrifual machines, presses, elevators, looms, rinders, woodworkin, coolin, packain equipment, other severe duty applications. Feature Modern flame retention system with robust frame, end shields and T-box. Certification for the use with frequency inverters T4 Additional nameplate for the use with frequency inverters. Efficiency Paintin Plan for Severe Environments Avoid flame propaation from inside the motor to the external side, uaranteein safety protection to the life, machines and environment. Guarantee in speed variation applications and hazardous areas such as Zone 1 and Zone 2, accordin to CESI certification. Easy identification of the conditions of operation temperature (speed and torque rane) Premium Efficiency (EFF1) motors, uarantee a fast return of investment. Special for industrial severe environments, sheltered or not, which may contain SO2, steam, solid contaminants and hih humidity. Product suitable to meet the most demanded applications in the industry. * Notes: Motor rated Voltae V NOM 460V 460V < V NOM 575V System Standard Reinforced Voltae peak in the motor 1430V 1780V Technical criteria for the use of motors fed by inverters dv/dt Inverter outlet 5200 V/µs 6500 V/µs Rise Time(*) Of Inverter MTBP(*) Time between pulses 0,1 µs 6 µs Classification: IEC Standard CENELEC Standard Zone 1; Group IIB Group IIB; Cateory 2 The classification in Zone 1 means that the motor is suitable to operate also in Zone 2 once Zone 1 represents an operatin condition worse than Zone 2. The same applies to Groups and Cateories: Ex d and Ex de motors are suitable to operate also in Group IIA and Cateory 3. Certification: In Europe, WEG explosion proof motors meet ATEX Directive 94/9/EC certified by PTB and product certified by CESI Centro Elettrotecnico Sperimentale Italiano S.P.A. The CESI certificates of conformity for explosion proof in flameproof enclosure d and de as per EN50014 / EN50018 are: Ex d Explosion proof motors (class of temperature T4) Ex de Explosion proof motors with increased safety terminal box (class of temperature T4) 6 Motors Product Lines
www.we.net Brake motor In order to have a company workin with hih performance it is necessary to have equipments workin accordin to its needs. WEG brake motor is perfect to equipments where fast safety stops are required, positionin and time savin. WEG brakin solutions allows synery in the production process, helpin with aility and safety. WEG brake motors are available in versions: Standard Efficiency (EFF2), Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) and they are suitable for the use with frequency inverters*. Motor Output: 0,12 up to 37kW Poles: II, IV, VI and VIII Frame: 63 up to 200L Three-phase multivoltae, IP55, TEFC, 50Hz Cast Iron Frame or Aluminum Frame These motors can be used on any machine that requires quick stops and time savins durin installation: machine tools, looms, packin machines, ates, wood machines, cranes, other severe duty applications. Hih performance brakin system Manual brake release WISE System Efficiency Paintin Plan for Industrial Environments State-of-the-art Ventilation System Guarantee precision brakin, fast and safe with easy maintenance. Possibility to keep the motor free durin emerency situations or whenever necessary. Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks*. Premium Efficiency (EFF1) and Top Premium Efficiency (Exceeds EFF1) motors, uarantee a fast return of investment. Suitable for the use in slihtly severe and sheltered environments, with low averae humidity, reular temperature variations. Uniform refrieration of the motor with sinificant temperature reduction in the external surface and bearins, uarantee hih performance and economy to your application. Product suitable to meet the most demanded applications in the industry. * Notes: Technical criteria for use of motors fed by inverters Motor rated Voltae V NOM 460V 460V < V NOM 575V System Standard Reinforced Voltae peak in the motor 1430V 1780V dv/dt Inverter outlet 5200 V/µs 6500 V/µs Rise Time(*) Of Inverter MTBP(*) Time between pulses 0,1 µs 6 µs Motors Product Lines 7
www.we.net Sinle Phase Aluminum These motors have a wide rane of applications. Because of their hih startin torque, they are particularly well-suited for heavy startin loads. Motor Output: 0.12 up to 9.2kW Poles: II and IV. Frames: 71 up to 132M Paintin: Ral 5007 (Blue) Pumps, central air conditionin, fans, crushers, pulleys, compressors, continuous conveyors, machine tools, windin machines, mills, centrifual machines, presses, cranes, overhead cranes, overhead cranes, oil wells, elevators, looms, rinders, wood cuttin machines, injectors, extruders, car traction, rollin tables, coolin towers, packin machines. V-rin Seals Exclusive WISE System To provide the best possible protection in dusty and hih moisture environments. Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks. Motors Product Lines
www.we.net Three Phase ODP The Open Drip Proof motors are desined for environments where dirt and moisture are minimal and provide maximum ventilation and heat dissipation. Motor Output: 11 up to 220kW Poles: II, and IV Frames: 160M up to 280S/M Paintin: RAL 5007 Pumps, industrial equipments, blowers, compressors, machinery. Exclusive WISE System Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks. Motors Product Lines 9
www.we.net Saw Arbor Sinle and double shaft ends available, these motors are suitable for a wide rane of applications such as circular saws, pendulum saws, polishin machines and others. Motors are all cast iron and have service factor 1.0. they can replace conventional circular saw drive systems. Motor Output: 2,2 up to 5,5kW Poles: II and IV. Frames: 80S-MS up to 90L-MS Paintin: Ral 5007 (Blue) Band saw, flywheel saw, flywheel disc, abrasive cuttin and metal polishin disc, top ede cuttin disc, rindin, wood millin machine. Product special develop for saw arbor application with extra features. 10 Motors Product Lines
www.we.net W21 Nema These TEFC motors are built accordin NEMA specifications and desined for operation in moist or dusty atmospheric conditions without affectin their useful life. Motor Output: 1 up to 500kW Poles: II, IV, VI and VIII Frames: 143T up to 586/7 Paintin: Syntetic enamel alkyd resin base Pumps, fans, kneader and mixer machines, cuttin and sawin machines, pressin machines, industrial equipment, conveyors, blowers, compressors, machinery, cranes and packain equipment. V-rin Seals Exclusive WISE System To provide the best possible protection in dusty and hih moisture environments. Increase the electrical strenth of the stator, allowin the motor to operate with frequency inverters, without damain by the voltae peaks. Motors Product Lines 11
WEG Worldwide Operations ARGENTINA WEG EQUIPAMIENTOS ELECTRICOS S.A. (Headquarters San Francisco-Cordoba) So. Pampilione 4849 Parque Industrial San Francisco 2400 - San Francisco Phone(s): +54 (3564) 421484 Fax: +54 (3564) 421459 info-ar@we.net www.we.net/ar AUSTRALIA WEG AUSTRALIA PTY. LTD. 3 Dalmore Drive Carribean Park Industrial Estate Scoresby VIC 3179 - Melbourne Phone(s): 61 (3) 9765 4600 Fax: 61 (3) 9753 2088 info-au@we.net www.we.net/au BELGIUM WEG BENELUX S.A. Rue de l Industrie 30 D, 1400 Nivelles Phone(s): + 32 (67) 88-8420 Fax: + 32 (67) 84-1748 info-be@we.net www.we.net/be CHILE WEG CHILE S.A. Los Canteros 8600 La Reina - Santiao Phone(s): (56-2) 784 8900 Fax: (56-2) 784 8950 info-cl@we.net www.we.net/cl CHINA WEG (NANTONG) ELECTRIC MOTOR MANUFACTURING Co., Ltd. No. 128 - Xinkai Nan Road, Nanton Economic and Technoloical Development Area Jiansu Province, China PC226010 Phone(s): 86 513 8598 9329 Fax: 86 513 8592 1310 info-cn@we.net www.we.net/cn COLOMBIA WEG COLOMBIA LTDA Calle 46A N82-54 Portería II - Bodea 7 - San Cayetano II - Bootá Phone(s): (57 1) 416 0166 Fax: (57 1) 416 2077 info-co@we.net www.we.net/co FRANCE WEG FRANCE SAS ZI de Chenes Le Loup 13 Rue du Morellon BP 738 38297 Saint Quentin Fallavier Phone(s): +33 (0) 4 74 99 11 35 Fax: +33 (0) 4 74 99 11 44 info-fr@we.net www.we.net/fr GERMANY WEG GERMANY GmbH Alfred-Nobel-Str. 7-9 D-50226 Frechen Phone(s): +49 (2234) 9 5353-0 Fax: +49 (2234) 9 5353-10 info-de@we.net www.we.net/de INDIA WEG Electric (India) Pvt. Ltd. #38, Ground Floor, 1st Main Road, Lower Palace Orchards, Banalore 560 003 Phone(s): +91-80-4128 2007 +91-80-4128 2006 Fax: +91-80-2336 7624 info-in@we.net www.we.net/in ITALY WEG ITALIA S.R.L. V.le Brianza 20-20092 - Cinisello Balsamo - Milano Phone(s): (39) 02 6129-3535 Fax: (39) 02 6601-3738 info-it@we.net www.we.net/it JAPAN WEG ELECTRIC MOTORS JAPAN CO., LTD. Matsumoto Bld. 2F, 3-23-7 Kamata, Ohta-ku, Tokyo, Japan 144-0052 Phone(s): (81) 3 3736-2998 Fax: (81) 3 3736-2995 info-jp@we.net www.we.net/jp MEXICO WEG MEXICO, S.A. DE C.V. Carretera Jorobas-Tula Km. 3.5, Manzana 5, Lote 1 Fraccionamiento Parque Industrial - Huehuetoca, Estado de México - C.P. 54680 Phone(s): + 52 (55) 5321 4275 Fax: + 52 (55) 5321 4262 info-mx@we.net www.we.net/mx NETHERLANDS WEG NETHERLANDS Sales Office of WEG Benelux S.A. Keulenstraat 4E 7418 ET Deventer Phone(s): +31 (0) 570-620550 Fax: +31 (0) 570-620560 info-nl@we.net www.we.net/nl PORTUGAL WEG EURO - INDÚSTRIA ELÉCTRICA, S.A. Rua En. Frederico Ulrich Apartado 6074 4476-908 - Maia Phone(s): +351 229 477 705 Fax: +351 229 477 792 info-pt@we.net www.we.net/pt RUSSIA WEG RUSSIA Pochainskaya Str. 17 Nizhny Novorod 603001 - Russia Phone(s): +7-831-2780425 Fax: +7-831-2780424 info-ru@we.net www.we.net/ru SPAIN WEG IBERIA S.L. Avenida de la Industria,25 28823 Coslada - Madrid Phone(s) : (34) 916 553 008 Fax : (34) 916 553 058 info-es@we.net www.we.net/es SINGAPORE WEG SINGAPORE PTE LTD 159, Kampon Ampat, #06-02A KA PLACE. Sinapore 368328. Phone(s): +65 6858 9081 Fax: +65 6858 1081 info-s@we.net www.we.net/s SWEDEN WEG SCANDINAVIA AB Box 10196 Verkstadatan 9 434 22 Kunsbacka Phone(s): (46) 300 73400 Fax: (46) 300 70264 info-se@we.net www.we.net/se UK WEG ELECTRIC MOTORS (U.K.) LTD. 28/29 Walkers Road Manorside Industrial Estate North Moons Moat - Redditch Worcestershire B98 9HE Phone(s): 44 (0)1527 596-748 Fax: 44 (0)1527 591-133 info-uk@we.net www.we.net/uk UNITED ARAB EMIRATES WEG MIDDLE EAST FZE JAFZA JEBEL ALI FREE ZONE Tower 18, 19th Floor, Office LB181905 Dubai United Arab Emirates info-ae@we.net www.we.net/ae USA WEG ELECTRIC CORPORATION 1327 Northbrook Parkway, Suite 490 Suwanee 30024 Phone(s): 1-770-338-5656 Fax: 1-770-338-1632 info-us@we.net www.we.net/us VENEZUELA WEG INDUSTRIAS VENEZUELA C.A. Parcela T-4-A Transversal 9 Urb. Industrial Carabobo Catastral 79-101 Edf. ELIMECA Loc. ELIMECA, Zona Postal 2003, Valencia, Edo. Carabobo Phone(s): (58) 241 838 9239 Fax: (58) 241 838 9239 info-ve@we.net www.we.net/ve WEG Equipamentos Elétricos S.A. International Division Av. Prefeito Waldemar Grubba, 3000 89256-900 - Jarauá do Sul - SC - Brazil Phone: 55 (47) 3276-4002 Fax: 55 (47) 3276-4060 www.we.net 271.01/012009 - The values shown are subject to chane without prior notice. The information is for reference only.