MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY
|
|
- Joseph Wilcox
- 5 years ago
- Views:
Transcription
1 MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY TYPE AEHE, AEHH8N, AEHH8NCF, AEUH8NDC Effective Supercedes APPLICATIONS: Fans & Blowers Compressor Any Severe Duty/ Petro-Chem/ Pumps Mixers Pulp & Paper Application Crushers Conveyors FEATURES: 3/4-800 hp: 3600, 1800, 1200, 900 RPM hp: Foot Mounted with C-Flange or Round Body C-Flange Totally Enclosed Fan Cooled (IP54 Rating; IP55 Ratings for Frames Sizes 5000 and Larger) NEMA Premium Efficient Ratings From hp, Denoted Catalog Number Prefix of EP - Note (1) Department of Energy Efficiency Certification # CC002A 36 Month Warranty from Date of Manufacture 3 Phase, 60 Hz, 230/ 460V (Usable on 208V) 150 hp and Larger are 460V Only - Note (2) 575V Ratings Available, Denoted by a Catalog Number Suffix of 5 - Note (2) 1.15 Service Factor Continuous NEMA Design B Torques as a Minimum; Design C Motors are Denoted with a superscript "C" Class B Temperature Rise, Class F Insulation with Phenolic Alkyd Resin Varnish 2 Dips and Bakes Oversized Main Conduit Box Rotatable in 90 Degree Increments Fully Gasketed with NPT Threaded Entrance F1 Mounted. F2 Available See EXTRAS/ OPTIONS Below Designed for 40 C Ambient Temperature and 3300 ft. Elevation - Note (3) CSA Certified for Class I, Division II, Groups B, C, D; Temp Code T3C, Non Sparking, Non Static Fan - Note (4) Bidirectional Rotation Except 2 Pole Motors 5000 Frame and Larger which are Uni-directional CCW Facing the Drive-End. See EXTRAS/ OPTIONS Below if CW Rotation is Required. Cast Iron Frame, End Brackets, Fan Cover, and Main Conduit Box Dual Drilled Feet Longer Frames. (i.e. 145T Drilled Also for 143T) Through 449T Frames Only (5) 1045 Carbon Steel Shaft. Aluminum Die Cast Squirrel Cage Rotor Construction for Frames 5011 and Smaller. Copper/ Copper Alloy Rotor for Frames Frames. Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat/ Paint Color: Light Grey Munsell N5.0 Vacuum De-Gassed Re-greasable Ball Bearings (or Roller) on 280TS Frames and Larger Using Polyrex EM Grease Single Shielded Bearings on Frames 140T-280T Pre-Packed with Polyrex EM Grease Automatic Grease Discharge Fittings on Frames on Re-Greaseable Motors Labyrinth Type Metal Flinger on Both Ends for Frames 280TS to 6800 Rubber Flinger on Drive-End for Frames 140T to 280T Cast Iron Inner and Outer Bearing Caps on Both Ends for Frames 280TS to 6800 Grounding Terminal Inside Main Box Stainless Steel Nameplate UL Recognized and CSA Approved for Inverter Duty per NEMA MG 1, Part hp and Below. 350 hp and Above are Suitable for Inverter Duty per NEMA MG 1, Part 31, Note (6) Inverter Duty Magnet Wire Capable of Withstanding Voltage Spikes of Up to 2200 Volts Precautions should be taken to eliminate or reduce shaft currents that may be imposed on the motor by the VFD as stated per NEMA MG1, Part Insulated Non-Drive End Bearing on 2-Pole Motors 600 hp and Larger Speed Ranges: 20:1 VT, 10:1 CT. 350 hp and Larger are 3:1 CT 9 Leads - 5 hp and Below, 12 Leads hp to 125 hp, 6 Leads hp and Larger Breather Drains in Both End Frames for Vertical Mount. EXTRAS/ OPTIONS: Please ask your AID Solutions Expert for a list of common modifications that can be performed. Notes: (1) NEMA Premium Efficiency levels only applies to hp, 3600, 1800, 1200 RPM. (2) 208V or the current rating will not appear on the motor nameplate. Please see Modification for Nameplate adder. TWMC carries minimal 575V stock. Please check availability to ensure required motors are in stock. Ratings may be available from our Canadian warehouses or factory. Pricing and lead time may vary. (3) Please consult factory for suitability in higher ambients and higher elevations. (4) Self-Certification applies to 300 hp and above. (5) EP3006, EP3502 and EP3504 are not dual drilled. (6) Motor service factor is 1.0 when operated on a VFD.
2 MAX-E1 MOTOR DIMENSIONS TYPE AEHE Figure 1 FRAME FIGURE MOUNTING SIZE NO. E 2F H BA A B C D G J L M O P K 143T T T T T T T T T TS T TS T TS T TS T TS T TS T T TS T TS T TS T TS T TS **449T **449TS A A A C C C C 6, B B 6, B B B B B B B B Dimension D tolerance: inch inch (143T-365T); inch (404T-449T). 2. Dimension U tolerance: inch inch (143T-215T); inch (254T-449T). 3. Dimension R tolerance: inch inch. 4. Bearing with mark * : Grease pre-packed shielded rolling bearings. 5. **Overall Dimensions are larger than standard T-Frames. 6. Superscript numbers after frame size indicates number of poles.
3 MAX-E1 MOTOR DIMENSIONS TYPE AEHE Figure 2 KEY KEY TERMINAL HOUSING SHAFT EXTENSIONS BEARINGS FRAME SEAT DRIVE NON-DRIVE NO. T WIDTH THICK LENGTH R AA AB AC XB N-W U V END END 143T na *6205ZZ *6205ZZ 145T na *6205ZZ *6205ZZ 182T *6306ZZ *6306ZZ 184T *6306ZZ *6306ZZ 213T *6308ZZ *6306ZZ 215T *6308ZZ *6306ZZ 254T *6309ZZ *6307ZZ 256T *6309ZZ *6307ZZ 284T *6311ZZ *6310ZZ 284TS ZZC3 6211ZZC3 286T *6311ZZ *6310ZZ 286TS ZZC3 6211ZZC3 324T TS C3 6212C3 326T TS C3 6212C3 364T TS C3 6212C3 365T TS C3 6212C3 404T T TS C3 6313C3 444T TS C3 6314C3 445T TS C3 6316C3 447T TS C3 6314C3 449T TS C3 6314C3 **449T **449TS C3 6314C3 5009A C3 6314C3 5011A C3 6314C3 5810A C3 6314C3 5007C NU324C C NU324C C NU324C C 6, NU324C B NU324C B 6, NU324C B (2) NU326C B (2) NU326C B (2) NU326C B (2) NU326C B (2) NU326C B (2) NU326C B (2) NU326C B (2) NU326C Dimension D tolerance: inch inch (143T-365T); inch (404T-449T). 2. Dimension U tolerance: inch inch (143T-215T); inch (254T-449T). 3. Dimension R tolerance: inch inch. 4. Bearing with mark * : Grease pre-packed shielded rolling bearings. 5. **Overall Dimensions are larger than standard T-Frames. 6. Superscript number after frame size indicates number of poles. 7. (2) Indicates 2 conduit opening per terminal box.
4 PERFORMANCE DATA Full Load Locked Rotor FULL NOM. CURRENT BREAK- ROTOR NEMA APPROX. CATALOG HP LOAD FRAME TORQUE EFF. P.F. AMPS TORQUE AMPS DOWN WK 2 CODE WEIGHT NO. RPM SIZE lb-ft (%) (% (%FLT) (lb-ft 2) LETTER (lbs.) E00/ T P 55 E T N 55 E T N 62 E T N 95 E1/ T M 55 E1/ T M 62 E1/ T M 95 E1/ T M 114 E T L 62 E T L 62 E T L 114 E T L 167 E T K 95 E T K 95 E T K 167 E T K 189 E T J 114 E T J 114 E T J 189 E T J 288 E7/ T H 167 E7/ T H 167 E7/ T H 288 E7/ T H 332 E T H 189 E T H 189 E T H 332 E T H 429 E T G 288 E T G 288 E T G 429 E T G 475 E T G 332 E T G 332 E T G 475 E T G 664 E TS G 418 E T G 429 E T G 664 E T G 724 E TS G 455 E T G 475 E T G 724 E T G 834 E TS G 618 E T G 664 E T G 898 E T G 913 E TS G 693 E T G 724 E T G 928 E T G 1166 E TS G 818 E T G 898 E T G 1165 E T G 1298 E TS G 880 E T G 928 E T G 1298 E0758R T G 1600 E TS G 1144 E T G 1298 E1006R T G 1550 E1008R T G 1800 E TS G 1450 E T G 1550 E1256R T G 1900 E1258R T G 2450 E TS G 1550 E T G 1700 E1506R T G 2200 E1508R T G The above are typical values based on test. 2. Actual load and full voltage starting per ANSI and IEEE standard 112, Method B. 3. Minimum guaranteed efficiency values can be certified with actual tests. 4. Breakdown and locked rotor torque are shown as NEMA minimum values HP and above are 460V only. 6. Data subject to change without notice. 7. ** Overall dimension are larger than standard T-Frames.
5 PERFORMANCE DATA FULL LOAD LOCKED ROTOR FULL NOM. CURRENT BREAK- ROTOR NEMA APPROX. CATALOG HP LOAD FRAME TORQUE EFF. P.F. AMPS TORQUE AMPS DOWN WK 2 CODE WEIGHT NO. RPM SIZE (lb-ft) (%) (% (%FLT) (lb-ft 2 ) LETTER (lbs.) E TS G 2150 E T G 2350 E2006R T G 2650 E2008R C G 3200 E TS G 2450 E T G 2650 E2506R **449T G 2950 E2508R C G 4000 E **449TS G 2800 E **449T G 2850 E3006R **449T G 3450 E3008R C G 4200 E **449TS G 3100 E **449T G 3350 E3506R B G 4650 E3508R B G 4800 E A G 3450 E C G 3700 E4006R B G 4900 E4008R B G 5100 E A G 4200 E B G 4800 E4506R B G 5250 E4508R B G 5450 E A G 4600 E B G 5000 E5006R B G 5600 E5008R B G 6000 E A G 6000 E B G 5800 E6006R B G 6400 E6008R B G 8050 E A G 6600 E B G 6800 E7006R B G 6900 E7008R B G 8500 E B G 7250 E8006R B G 8000 E8008R B G The above are typical values based on test. 2. Actual load and full voltage starting per ANSI and IEEE standard 112, Method B. 3. Minimum guaranteed efficiency values can be certified with actual tests. 4. Breakdown and locked rotor torque are shown as NEMA minimum values HP and above are 460V only. 6. Data subject to change without notice. 7. ** Overall dimension are larger than standard T-Frames.
MAX-E1 HIGH EFFICIENCY. Severe Duty
MAX-E1 HIGH EFFICIENCY Severe Duty DESIGN FEATURES & CONSTRUCTION ALL MAX-E1 MOTORS DELIVER THESE IMPRESSIVE DESIGN FEATURES HPE - High Pulse Endurance Wire Non-hygroscopic, Class F insulation system High-grade,
More informationFeatures and Benefits
Features and Benefits ELECTRICAL DESIN z 1 500 HP; 2, 4, 6 pole z 3600, 1800, 1200 RPM z 3 Phase, 60 Hz, 460V z Motors can be rerated for 380, 400 and 415 VAC at 50 Hz. z Designed to meet NEMA M1, M13,
More informationMAX-VH. Vertical Hollow Shaft Motors
MAX-VH Vertical Hollow Shaft Motors Specifications OTHER PERFORMANCE CONSTRUCTION APPLICATION RATING Item Type Of Motors Design Standards Voltages Frequency Output Range RPM (SYN.) Time Duty Frame Size
More information5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA MG1 (2003) Part 31,
5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA M1 (003) Part 31, DefinitePurpose Inverter Fed Motors Inverter Shield TM
More informationSUPER-MAX INDUCTION MOTOR
Compliance Certificate No.CC014A CSA Listed No. 1077944 SUPER-MAX INDUCTION MOTOR PREMIUM EFFICIENCY SERIES CSA Certified for Class I Division 2 Groups A, B, C, D T3C TOTALLY ENCLOSED FAN COOLED FRAME:
More informationGeneral Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
More informationPremium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 92
Premium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 9 Crown Triton TM Series Premium Efficiency Motors Experience Combined with Technology yundai Induction Motors use Finite Element
More informationTHREE PHASE MOTORS RIGID BASE GENERAL PURPOSE Rigid Base
THREE PHASE MOTORS DRIP-PROOF RPM 60 HP Hz 1/4 1725 1725 S56 100027 $246 A 16 208-230/460 1.4 58.0 9.24 1/3 3450 48 101447 251 A 14 208-230/460 1.4 68.0 9.00 1725 48 100446 266 A 17 208-230/460 1.6 64.3
More informationW22 NEMA Brake Motors - NEMA Premium
101 www.pamensky.com TEFC Standard Features Motors are compliant with DOE and NRCAN Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 208-230/460V, 575V Brake power supply: 220/230/240/460/575V Totally Enclosed
More informationINDEX NEMA PREMIUM EFFICIENCY
INDEX S EED EXC DS R TS O DAR MEE E STAN CE THREE-PHASE MOTORS - FEATURES & LIST PRICES THREE-PHASE MOTORS TEFC - Foot-Mount................... A-51 A-54 TEFC C-Flange........................ A-55 ODP
More informationSevere Duty is Standard with WEG W22 motors
W22 Severe Duty TEFC Severe Duty is Standard with WEG W22 motors W22 Severe Duty TEFC Severe Duty High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency
More informationProducts & Services EQ Series AC Drives. TEAMMaster WOUND ROTOR MOTORS WORLD SERIES SYNCHRONOUS MOTORS. EXPLOSION PROOF (Division 1, Zone 1)
630-543-7867 Products & Services EQ7 1-1000 hp Intelligent Keypad with Extensive Diagnostics Select Any of 4 Control Methods - V/ Hz - Dynamic Torque - Sensorless Vector - Closed-loop Vector Quick Setup
More informationPowerful + Efficient + Reliable
1 THRU 50HP NEMA 140T THRU 449T HIGH EFFICIENCY ISO9001 CERTIFIED Powerful + Efficient + Reliable TEFC CAST IRON FRAMES CLASS F INSULATED 1.15 SERVICE FACTOR OVER SIZED BEARINGS LOW-LOSS ELECTRICAL GRADE
More informationA Full Line of Low Voltage IEC Motors In-Stock
BUILT TO PERFORM WHERE OTHERS FAIL A Full Line of Low Voltage IEC Motors In-Stock Distributed by Elektrim Motors Authorized Distributor: www.elektrimmotors.com or call 855-Go-Elektrim 0.08-220HP Low Voltage
More information7.0 High HP Low and Medium Voltage
TABLE OF CONTENTS 7.0 High HP Low and 7.1 Quantum LMV - TEFC Low Voltage 7.7 Quantum LMV - TEFC 7.12 449 Frame TEFC 7.16 WPII, TEFC, TEAAC Standard Features 7.17 WPII Pricing and Kits 7.20 Pegasus MHV
More informationAluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationNORDIC-PREMIUM EFFICIENCY
CANADIAN STANDARDS ASSOCIAT ION EEV NORDIC-PREMIUM EICIENCY CAST IRON PREMIUM EICIENCY ELECTRIC MOTORS VD COMPATIBLE Meets or exceeds NeMA MG-1 table 1-1 premium efficiency corona & spike resistant MAGNet
More informationW22 Medium Voltage Motors TEFC - Severe Duty
101 www.pamensky.com W22 Medium Voltage Motors TEFC - Severe Duty Standard Features Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 1200V, 2300V, 2400V, 3300V, 4000V, 4160V & 6600V Totally Enclosed Fan
More informationMedium Voltage Motors and Soft Starters
TEFC Severe Duty Motors TEFC Motors 2300 4160V................................................. A-252 TEFC Motors Add-On Modifications............................................. A-253 TEFC 2300V - Electrical
More informationQuick and Easy Voltage Flexibility for NEMA and Metric IEC Motors Motors are re-rated from stock models to 575V in as little as (1) business day
Elektrim 7V s Quick and Easy Voltage Flexibility for NEMA and Metric IEC s s are re-rated from stock models to 7V in as little as () business day Available 7V s: -0 HP NEMA Premium Performance Series s
More informationAESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM
More informationBrake Motors Aluminium Frame Improved Efficiency EFF2
Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationIndustrial and Commercial Duty IEC Motors
Industrial and Commercial Duty IEC Motors A Regal Brand Five product families delivering a world of opportunity LEESON Passport Series IEC Motors. There s a world of opportunity right here at home. The
More informationSevere Duty / IEEE TEFC Motors SD100 IEEE841 / RGZEESDX
/ IEEE 841 - TEFC Motors Introduction The IEEE 841 motors meets or exceeds IEEE 841-2001 standards for energy efficiency, high performance, variable speed operation, rugged construction and long service
More informationPRODUCTIVITY HAS A NAME. Torque Master Motors
PRODUCTIVITY HAS A NAME Torque Master Motors Premium Efficient Torque Master Motors TORQUE MASTER PE A FORCE TO BE RECKONED WITH Quality. Performance. Dependability. That s what the Torque Master series
More informationEffective: ISO 9001:2008
ISO 9001:2008 Effective: 08-01-11 QUALITY STATEMENT TECO-Westinghouse Motor Company is committed to serving the needs of our customers BETTER THAN ANYONE ELSE by providing products and services that meet
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More information: B3; B5; B14; B34; B35; V1
ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia
More informationJRP Motors 1 and 3 Phases TEFC 56C Stainless and Rolled Steel Motors
JRP Motors and 3 Phases TEFC 56C Stainless and Rolled Steel Motors /3-3 HP PH & 3PH TEFC 60 Hz AC Foot Mounted and Round Body C-Face Motors Features Inverter Duty Rated: 3:CT & 5:VT (3-Phase only) Service
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More informationMotors Automation Energy Transmission & Distribution Coatings. g UL Listed. Fire Pump Motor. g I50Hz capablelower. maintenance USA375
Motors Automation Enery Transmission & Distribution Coatins Fire Pump Motor UL Listed I50Hz capablelower maintenance USA375 www.we.net UL Listed Fire Pump Motors ODP Three Phase Foot Mount and Flane Mount
More informationSevere duty cast iron frame motors
Severe duty cast iron frame motors When the going gets tough, these motors keep going SIMOTICS NEMA Low Voltage Motors www.usa.siemens.com/motors Siemens SIMOTICS low voltage severe duty motors Built to
More informationThe Best Value in Washdown Duty Motors and Drives
The Best Value in Washdown Duty Motors and Drives Long before we invested in the people, equipment and material required to produce Baldor Reliance Washdown Duty motors and drives, we invested our time
More informationSingle Phase Poultry Fan Motor, Standard Efficiency,TEAO, Squirrel Cage Rotor
No.: Date: 6/16/2011 Customer : TECHNICAL PROPOSAL Single Phase Poultry Fan Motor, Standard Efficiency,TEAO, Squirrel Cage Rotor Product line : Single-Phase : 48 & 56 TEAO Catalog Number :.3318ES1BRBPFC48
More informationProduct Information Packet VEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1
Product Information Packet VEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationGE Energy. X$D Ultra 841. NEMA Premium Extra Severe Duty Motors Frame HP
GE Energy X$D Ultra 841 Premium Extra Severe Duty Motors 143-449 Frame 0.75-300 HP GE sets the standard with powerful features. We are dedicated to the future. Since Edison s time at the leading edge of
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More informationProduct Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754
Product Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationMedium Voltage Motors
Medium Voltage Motors Toshiba Leading Innovation in Medium Voltage Motors Toshiba s new medium voltage totally-enclosed fan-cooled motor series, the Dura-Bull TX, is designed and made in Texas and offers
More informationNEMA & IEC Product Features and Benefits
NEMA & IEC Product Features and Benefits BEAUTY BENEATH THE SURFACE. Looking at a Techtop electric motor, it would be understandable if you thought it was just another NEMA or IEC squirrel-cage induction
More informationMotors Automation Energy Coatings. CrusherDuty. g Roller Bearing. g Reinforced Cast Iron. g Durable. Motor TPH Starter.
Motors Automation Energy Coatings CrusherDuty Motor TPH Starter g Roller Bearing g Reinforced Cast Iron g Durable g Quality CD0808 FOR THE MOST DEMANDING ROCK CRUSHER APPLICATIONS WEG Crusher Duty motors
More informationPowered to Perform. Electric Motors
Powered to Perform Electric Motors Built and Tested to Deliver Trans-Power brand motors use tested, proven designs to keep running strong day after day. They also include features that translate into reliability
More informationGeneral purpose aluminum frame motors. The right choice for efficiency and performance. SIMOTICS NEMA Low Voltage Motors.
General purpose aluminum frame motors The right choice for efficiency and performance SIMOTICS NEMA Low Voltage Motors www.usa.siemens.com/motors Siemens GP100A Aluminum Frame Motors Precision construction,
More informationAESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM
More informationAEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1
AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 STANDARD AND SPECIFICATION Performance: Meet the requirement of Singapore standard
More informationSEWPCC UPGRADING/EXPANSION PROJECT BID OPPORTUNITY SECTION LOW-VOLTAGE AC INDUCTION MOTORS
SECTION 26 20 00 LOW-VOLTAGE AC INDUCTION MOTORS SEWPCC UPGRADING/EXPANSION PROJECT PART 1 GENERAL 1.1 RELATED SECTIONS A. This section applies only when referenced by a motor-driven equipment specification.
More informationOver 525 Stock Motor Ratings. The Right Pump Motor for your Application. Leadership in Premium Efficiency. 1
Baldor Pump Motors Baldor Reliance is the leading supplier of Pump Motors to meet industrial and commercial applications. From industrial waste water to commercial pool pump motors Baldor Reliance pump
More informationSECTION MOTOR REQUIREMENTS for HVAC
PART 1 GENERAL 1.1 SECTION INCLUDES A. Single-phase electric motors B. Three-phase electric motors 1.2 REFERENCES SECTION 23 05 13 MOTOR REQUIREMENTS for HVAC A. ABMA 9 - Load Ratings and Fatigue Life
More informationThree Phase Modifiable NEMA Horizontal Motors Accessories and Modifications
1. Altitude Standard motors are designed for 3,300 feet altitude and 40 C ambient temperature. Atmospheric conditions at higher altitudes inhibit the motor s ability to dissipate heat, resulting in an
More informationOur brand names are known as both Cantoni Motor (CC045A) and Elektrim (CC025A).
This catalogue covers general purpose industrial motors, And crusher duty motors produced by antoni Group. Our brand names are known as both antoni Motor (045A) and Elektrim (025A). antoni Group manufactures
More informationFACTORY MODIFICATION PRICING Effective Supercedes
FACTORY MODIFICATION PRICING MODIFICATION LEAD TIME 1. TWMC standard lead time for all modifications is 5-10 working days. If quicker lead time is required, please contact TWMC. Expediting fees may apply.
More informationNEMA Premium. Efficiency Motors SIE series EISA Product Catalogue
NEMA Premium Efficiency Motors IE series NEMA Premium EIA 2007 Product Catalogue NEMA Premium Motors IE series ENERGY LEGILATION UMMARY The previous legislation affecting the energy efficiency of motors
More informationBlue Chip Severe Duty / Cooling Tower: Single Speed EPAct Efficiency
Blue Chip Severe Duty / Cooling Tower: Single Speed EPAct Efficiency Rigid Base, Three Phase IP55 Features: Blue Chip quality, 100% cast iron construction for rigidity and reduced vibration Internal and
More informationInverter Speed Ratio Information
Inverter Speed Ratio Information Guidelines for Application of General Purpose,, Single Speed on Variable Frequency Drives Meets NEMA MG1-2006 Part 30 and Part 31 Section 4.4.2 Unless stated otherwise,
More informationProduct Information Packet EM3611T 3HP,1760RPM,3PH,60HZ,182T,3632M,TEFC,F1
Product Information Packet EM3611T 3HP,1760RPM,3PH,60HZ,182T,3632M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationPowerful + Efficient + Reliable EEV CAST IRON PREMIUM EFFICIENCY ELECTRIC MOTORS 5 YEAR WARRANTY
1 TRU 50P NEMA 140T TRU 449T PREMIUM EICIENCY VD DUTY ISO9001 CERTIIED CANADIAN STANDARDS ASSOCIAT ION Powerful + Efficient + Reliable EEV VOLUME I CAST IRON PREMIUM EICIENCY ELECTRIC MOTORS 5 YEAR WARRANTY
More informationNEMA Premium Efficiency T-Frame Motors. Three-Phase, TEFC Enclosures RELIABILITY MATTERS
NEMA Premium Efficiency T-Frame Motors Three-Phase, TEFC Enclosures RELIABILITY MATTERS RELIABILITY MATTERS Aurora Motors a leading global supplier of NEMA premium vertical pump motors and T-frame motors
More informationWATTSAVER PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE
PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE The line of premium efficiency motors is now inverter capable. LEESON s unique IRIS voltage-spike-resistant insulation system is standard at no extra cost. motors
More informationProduct Information Packet VM HP,1725RPM,3PH,60HZ,56C,3413M,TEFC,F1
Product Information Packet VM3534.33HP,1725RPM,3PH,60HZ,56C,3413M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More information200 & 575 Volt Motors. 200 Volt, Three Phase, TEFC, Foot Mounted. 1/2 thru 50 Hp NEMA 56C thru 326T
Farm Duty 200 Volt, TEFC, Foot Mounted 200 & 7 Volt 1/2 thru 0 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power.
More informationExplosion Proof Motors
SINGLE-PHASE Foot Mount...A-110 C-Face Foot Mount...A-110 THREE-PHASE Foot Mount...A-112 C-Face Foot Mount...A-116 C-Face Footless...A-117 JP Foot Mount...A-117 ATEX Foot Mount...A-120 A-108 Fractional
More information1/3-3 HP 1PH & 3PH TEFC 60 Hz NEMA AC Foot Mounted and Round Body C-Face Motors
/3-3 HP PH & 3PH TEF 60 Hz NEMA A Foot Mounted and Round Body -Face Motors Features Inverter Duty Rated: 3:T & 5:VT (3-Phase only) Service Factor:.5 Design: B Protection Degree: IP55 Enclosure: TEF F mount
More informationSingle and Three Phase General Purpose Motors
Single and Three Phase Single phase and three phase general purpose motors are designed to meet or exceed the energy efficiency requirements of the United States, Canada and Mexico for general purpose
More informationDATA SHEET. Three Phase Induction Motor - Squirrel Cage. Customer : Product code : : W22 NEMA Premium Efficiency Three-Phase
DATA SHEET Frame Output Poles Frequency Rated voltage Rated current L. R. Amperes LRC No load current Rated speed Slip Rated torque Locked rotor torque Breakdown torque Insulation class Service factor
More informationNEMA Premium Efficiency Motors SIE series
NEMA Premium Efficiency Motors IE series NEMA Premium 2015 Product Catalogue MOTEUR 'PREMIUM EFFICIENCY' CERTIFIÉ ET VERIFIÉ CA (UA) BATI EN FONTE ERVICE FACTOR JUQU'À 1.40 IOLATION DE CLAE F (155 C),
More informationW21 HIGH EFFICIENCY GENERAL PURPOSE MOTORS
W21 HIGH EFFICIENCY MOTORS!"#$&'#(&)*"&+,-&"./&0,,12#3&4,.5&!"00&678997:;?@&ABCD7=EF=G Data subject to change without notice. PDF processed with CutePDF evaluation edition www.cutepdf.com :7BD ROLLED
More informationProduct Information Packet EM4109T 40HP,3530RPM,3PH,60HZ,324TS,1058M,TEFC,F
Product Information Packet EM4109T 40HP,3530RPM,3PH,60HZ,324TS,1058M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationAsynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors
Asynchronous, Low Voltage, Squirrel Cage, Three Phase Electric Motors Series R2, Frame 63 355 Introduction KHM R2 series cast iron motors are totally enclosed fan cooled, 3 phase, and squirrel cage induction
More informationAutomationDirect AC Motors Selection Overview
AutomationDirect AC s Selection (1992), High, What does it all mean? In 1992, the U.S. Congress passed legislation requiring that general purpose Design A & B motors meet minimum efficiency requirements,
More information1/2 thru 50 Hp NEMA 56C thru 326T
200 Volt, TEFC, Foot Mounted Cast Iron Foot Mounted 200 & 7 Volt 1/2 thru 0 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200
More informationDesign Standard. Electric Motors. Detailed specifications follow. PART 1 - GENERAL
Design Standard Detailed specifications follow. PART 1 - GENERAL 1.01 SCOPE This design guidelines contained herein include the requirements of electric motors utilized for electric motor driven systems
More informationProduct Information Packet EM4110T 40HP,1775RPM,3PH,60HZ,324T,1254M,TEFC,F1
Product Information Packet EM4110T 40HP,1775RPM,3PH,60HZ,324T,1254M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet CEM4110T 40HP,1775RPM,3PH,60HZ,324TC,1254M,TEFC,F
Product Information Packet CEM4110T 40HP,1775RPM,3PH,60HZ,324TC,1254M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet EM4107T 25HP,3520RPM,3PH,60HZ,284TS,0944M,TEFC,F
Product Information Packet EM4107T 25HP,3520RPM,3PH,60HZ,284TS,0944M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationYour Source for a Complete Line of Electric Motors. Rolled Steel Motors. A Complete Line of Single Phase and Three Phase Rolled Steel Motors
Your Source for a Complete Line of Electric Motors Rolled Steel Motors A Complete Line of Single Phase and Three Phase Rolled Steel Motors Mission Statement To provide the United States market for industrial
More informationGeneral Purpose - TEFC Motors GP10 / RGZP (Cast Iron Frame)
- TEFC Motors The GP10 and RGZP motors are ideal for both indoor and outdoor applications and in operating atmospheres that contain moisture, dust and grit. These industry workhorses are ideal for use
More informationProduct Information Packet ECP50504L-4 500HP,1789RPM,3PH,60HZ,5010,TEFC,F1
Product Information Packet ECP50504L-4 500HP,1789RPM,3PH,60HZ,5010,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationsteel standard SST DUCK components Epoxy Resin Rated Insulation System recognized stainless steel output shaft seal
Premium Efficiency Washguard Motors - Now Available! WASHGUARD MOTORS WASHGUARD MOTORS AVAILABLE IN FIVE STYLES Maximum service in critically clean or corrosive environments PREMIUM WASHGUARD ALL-STAINLESS
More informationProduct Information Packet CEM4103T 25HP,1775RPM,3PH,60HZ,284TC,1054M,TEFC,F
Product Information Packet CEM4103T 25HP,1775RPM,3PH,60HZ,284TC,1054M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationPRODUCT INFORMATION PACKET
PRODUCT INFORMATION PACKET Model No: 048S17D7204 Catalog No: D180 1/4,1725,DP,48Y,1/60/115 Self Cooled Regal and Marathon are trademarks of Regal Beloit Corporation or one of its affiliated companies.
More informationProduct Information Packet CEM3587T 2HP,1750RPM,3PH,60HZ,145TC,0527M,TEFC,F1
Product Information Packet CEM3587T 2HP,1750RPM,3PH,60HZ,145TC,0527M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationA. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.
PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the
More information5 Year Warranty Chemical & Process Duty Motors, IEEE-841 (2001) Premium Efficiency TEFC Severe Duty Design Corona Resistant Magnet Wire Class 1,
5 Year Warranty Chemical & Process Duty Motors, IEEE81 (1) Premium Efficiency TEFC Severe Duty Design Corona Resistant Magnet Wire Class 1, Division, roups A, B, C, D Class 1, Zone, roups A, B & C CSA
More informationProduct Information Packet ECP84314T-4 60HP,1780RPM,3PH,60HZ,364T,TEFC,FOOT
Product Information Packet ECP84314T-4 60HP,1780RPM,3PH,60HZ,364T,TEFC,FOOT Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet CEM2333T 15HP,1765RPM,3PH,60HZ,254TC,0944M,TEFC,F
Product Information Packet CEM2333T 15HP,1765RPM,3PH,60HZ,254TC,0944M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationPump Motors. Information. General. Single Phase Motors. Industrial Motors. General Purpose. Severe Duty Motors
General Industrial Pump HVAC Farm Duty 8 Pump From industrial wastewater to fire suppression systems or commercial pools, Baldor Reliance pump motors provide value by increasing reliability and reducing
More informationProduct Information Packet EM4104T 30HP,1760RPM,3PH,60HZ,286T,1056M,TEFC,F1
Product Information Packet EM4104T 30HP,1760RPM,3PH,60HZ,286T,1056M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationX$DUltra NEMA Premium 7 Extra Severe Duty Motors Frame 3/4-250 HP
gmotors X$DUltra 7 841 NEMA Premium 7 Extra Severe Duty Motors 143-449 Frame 3/4-250 HP GE sets the standard... We are dedicated to the future. Since Edison s time at the leading edge of discovery, GE
More informationProduct Information Packet MM KW,1725RPM,3PH,60HZ,D80,3428M,TEFC,B3
Product Information Packet MM3546.75KW,1725RPM,3PH,60HZ,D80,3428M,TEFC,B3 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet CP500808LR-4 800HP,897RPM,3PH,60HZ,G50,A95260M,TEFC,F
Product Information Packet CP500808LR-4 800HP,897RPM,3PH,60HZ,G50,A95260M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationProduct Information Packet CEM4109T 40HP,3530RPM,3PH,60HZ,324TSC,1058M,TEFC
Product Information Packet CEM4109T 40HP,3530RPM,3PH,60HZ,324TSC,1058M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationWhy Baldor? Baldor Vector Drives in a brick plant in Australia
Why Baldor? For over 80 years, Baldor has been dedicated to providing customers with the best value in energyefficient industrial electric motors and drives. To be considered as the best value supplier
More informationQuantum LMV. Low and Medium Voltage AC Induction Totally Enclosed Fan Cooled Motors. GE Power Conversion
GE Power Conversion Quantum LMV Low and Medium Voltage AC Induction Totally Enclosed Fan Cooled Motors NEMA 500 Frames IEC 315 Frames 200-800 HP 150-600 kw 2-12 Pole Ratings to Fit Your Applications NEMA
More informationStandard cast iron Motor
Standard cast iron Motor Frame size 80 to 355 Série 1L Phase 3 Voltage 265/460V 60Hz Types of mounting B3 V9 B5 B14 B6 B9 B3 / B5 V5 B3 / B14 B15 V1 B7 V18 V1 / V5 V8 V18 / V5 V6 B8 V3 / V6 V3 V19 V19
More informationSuper-E Premium Efficient Motors
Super-E Premium Efficient Motors Why Baldor? Customer Preference 20% 1985 50% 1990 90% 2000 94% 2003 95.5% 2007 The percentages shown reflect results of studies conducted in which Baldor was chosen as
More informationDATA SHEET. Three Phase Induction Motor - Squirrel Cage. Customer : Product code : : W22 NEMA Premium Efficiency Three-Phase
DATA SHEET Frame Output Poles Frequency Rated voltage Rated current L. R. Amperes LRC No load current Rated speed Slip Rated torque Locked rotor torque Breakdown torque Insulation class Service factor
More informationSUBMERSIBLES INDEX. General Description and Notes UL Motors Single-Phase UL Approved Three-Phase UL Approved... 4
SUBMERSIBLE MOTORS SUBMERSIBLES INDEX SUBMERSIBLE MOTORS General Description and Notes UL Motors...................... 2 Single-Phase UL Approved................................. 2 Three-Phase UL Approved..................................
More informationProduct Information Packet EM2333T-G 15HP,1765RPM,3PH,60HZ,254T,0944M,TEFC,F1
Product Information Packet EM2333T-G 15HP,1765RPM,3PH,60HZ,254T,0944M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet EM3558 2HP,1755RPM,3PH,60HZ,56,3528M,TEFC,F1,N
Product Information Packet EM3558 2HP,1755RPM,3PH,60HZ,56,3528M,TEFC,F1,N Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet EM2513T-G 15HP,1765RPM,3PH,60HZ,254T,3948M,OPSB,F1
Product Information Packet EM2513T-G 15HP,1765RPM,3PH,60HZ,254T,3948M,OPSB,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More information