5 Year Warranty Chemical & Process Duty Motors, IEEE-841 (2001) Premium Efficiency TEFC Severe Duty Design Corona Resistant Magnet Wire Class 1,
|
|
- Darren Wilcox
- 5 years ago
- Views:
Transcription
1 5 Year Warranty Chemical & Process Duty Motors, IEEE81 (1) Premium Efficiency TEFC Severe Duty Design Corona Resistant Magnet Wire Class 1, Division, roups A, B, C, D Class 1, Zone, roups A, B & C CSA Certified
2 IEEE81 Motors Experience Combined with Technology We at yundai eavy Industries Co., Ltd. use Finite Element Analysis (FEA) and Computer Aided Design (CAD) methods to develop and produce the most innovative motors from stateoftheart and fully automated manufacturing facilities. yundai s Crown Triton TM cast iron frames greatly improve motor performance by maximizing heat dissipation. The use of advanced technology to design and manufacture electric motors, results in a reasonably priced, top quality motor with superior performance characteristics. Compared with other high efficiency motors, yundai s Premium Efficiency motors guarantee better performance. Standard Production Range Frame Size : 13T to 9TZ orsepower : 1 to P Poles :,,, 8 pole Enclosure : TEFC, Rigid cast iron construction Approvals : CSA C US, EEV mark, CE, Class 1 Division, CUL 0_
3 IEEE81 Chemical & Process Motors Standard Features & Construction Approvals & Standards: 5 Year (0 months) warranty Fully compliant with IEEE81 standard Meets or exceeds NEMA M1 (3), Part 31 Efficiency verified (exceeds EPACT 9 & CSA C390) Fully tested per IEEE11, method B Approvals : CSA C US, EEV mark, CE, ISO9001 Certified for Class 1, Division / Zone, roups A, B, C & D /A,B &C with temperature code T3C for NEMA frame 10 to 30, and T3A for NEMA frame 30 to 0 Winding & Inverter Powered Ratings: yundai s inverter shield insulation system using inverter grade magnet wire and yundai s own low stress winding technique for exceptional corona and transient protection. Constant torque : 10:1 speed range, variable torque : zero to base speed Suitable for 1.5 x base speed, constant P (subject to mechanical limits) SF 0, SF 5 (Sine Wave), SF 1.0 PWM Class F insulation with Class B temperature rise Class nonhygroscopic varnish, double dip & bake cycles Single voltages, 0 V or 5 V, 0 z full range Supply voltage +/10 %, frequency +/5 % Altitude up to 3,000 feet (1,000 meters) without derating; ambient of 30 to +0 Construction: Totally Enclosed Fan Cooled, IP55 Protection Full construction per IEEE81 Nema design B or C torque Stainless steel nameplate, corrosion resistant zinc plated hardware Corrosion resistant, nonsparking polypropylene cooling fan Epoxy painted stator, rotor and motor frame Stainless steel condensation Tdrain plugs on DE & NDE round lug on motor frame and inside conduit box Oversize conduit box exceeds CSA, NEMA & NEC volume requirements Neoprene lead separator Precision foot flatness eliminates soft foot and extends bearing life Precision balanced rotor not to exceed 0.08 inches/second peak velocity Bearings: PROTEC TM (IP) labyrinth bearing isolator on DE Oversize vacuum degassed bearings Regreaseable bearings with internal bearing caps on DE & NDE, full range Bearings rated for hours, L10 for direct coupled applications and 50 hours, L10 for Vbelt applications Mobil Polyrex EM grease (35 to +) Bearing temperature rise (direct coupled) will not exceed 5 (50 for pole motors) IEEE81 motor test report supplied with each motor C & D flanges kits available for field modification 03_
4 IEEE81 Motors IEEE81 Chemical & Process Motors Optional Features Special voltages Two speed motors Special shaft designs and materials Special PROTEC TM bearing isolators Space heaters Drip canopies for vertical applications Thermistors Thermostats RTD for windings or bearings Constant speed blowers Encoders 0_
5 Your Seal of Approval The Ultimate in Bearing Protection The Bronze Age is Out ightech Bearing Isolators are in PROTEC TM vs Bronze Corrosive test results prove PROTEC TM s rotating labyrinth seal is superior to bronze IP rated, PROTEC TM utilization of PTFE (raphite / Teflon) provides impressive sealing and longevity performance True Noncontact seal. Will not wear out. No friction losses Custom formulated reinforced impervious PTFE material No internal Orings Twoway seal. Nothing in. Nothing out Zero lubricant leakage Total exclusion of contaminants Replaces radial lip oil seal or bronze seals Extends bearing life (less maintenance) IP UL tested for dust and water / chemical exclusion Corrosion resistant for 10 types of chemicals Optional FDA food grade, anti microbial available PROTEC TM LS PROTEC TM is first to offer unitized construction, self lubricated bearing isolator Contaminate exclusion relies on labyrinth technology, not an internal seal. PROTEC TM does not rely on simple internal Oring to protect bearing Superior chemical resistance provided by proprietary PTFE materials Inboard labyrinth construction is the most efficient design for retaining grease lubrication in bearing External Orings provide press fit at shaft and seal housing for zero wear of shaft or motor endbell First bearing isolator UL tested to IEEE81, meets IP and AP110 05_
6 IEEE81 Motors IEEE81 Chemical & Process Motors IEEE81 Chemical and Process Motors, TEFC Enclosure Meets or exceeds IEEE81 standard Class 1, Division, roups A, B, C & D, T3C temp. code for NEMA frame 10 to 30, and T3A for NEMA frame 30 to 0 Full cast iron construction Fully regreaseable bearings with inner bearing caps Precision 5plane balance, shaft runout and foot flatness Exceeds CSA C390 & EPACT 9 efficiency requirements Frame Size 13T 15T 18T 18T 13T 15T 5T 5T 8TS 8T 8TS 8T 3TS 3T 3TS 3T 3TS 3T 35TS 35T 0T 05TS 05T TS T 5TS 5T 7TS 7T 7TZ 9TS 9T 9TZ BA Note: 1. Dimension "D" Tolerance 10T30T : +0.00, T0T : +0.00, Overall Dimension "U" Tolerance Up to Dia. : , Dia. & Larger : , Equipped with PROTEC TM (IP) bearing isolator on D.E. igh torque NEMA design C (1800 & 1 RPM) Class F insulation with class B temperature rise Inverter grade insulation system meets or exceeds NEMA M1 Part 31 (3) Epoxy coated internally and externally 3phase, 0 z, 0 V, 5 V, SF 1.15, continuous duty Shaft Mounting Conduit Box R eyway ES C D O P U NW E F1 F S (5.00) (1.00) (1.00) (1.5) (1.5) (13.) (1.50) (1.50) (.00) (10.50) (10.50) (11.5) (11.5) 1.5 (1.5) (1.5) (1.50) (1.50) (17.99) (17.99) (17.99) (0.00) (0.00) (0.00) AA AB (Unit : inch) Fig. A B FI. A FI. B C ES S AB P O R ey T C ES S AB P O R ey T 8() holes F F1 BA NW U AA Conduit E D 8() holes F F1 BA NW U AA Conduit E D 0_
7 Performance Data for 0 V & 5 V Motors IEEE81 Chemical and Process Motors, TEFC Enclosure 3 phases, 0 z, 0 V & 5 V, SF, 1.15, continuous duty TEFC enclosure, class F insulation, 0 ambient temp. 07_ Note: 1. The above data are average expected values.. Actual minimum efficiencies can be certified by direct measurement based on ANSI/IEEE11 test method B and CSA C 390.: 3. Technical data are subject to change without notice. Rated Output (P) Nom. (%) Min. (%) Pole Frame Size Characteristics at Rated Output Full Load Speed (RPM) Efficiency Full Load 3/ Load (%) Full Load (%) Power Factor 0 V (A) Full Load Current 5 V (A) 0 V (A) Locked Rotor Current Torque Brg. Sizes Moment of Inertia W (lb.ft ) NEMA Code Letter Approx. Weight (lbs) D.E. ND.E. Full Load (lb.ft) Locked Rotor (%FLT) Breakdown (%FLT) 5 V (A) T 15T 13T 15T 18T 15T 15T 18T 18T 18T 13T 18T 18T 15T 13T 13T 5T 15T 15T 5T 5T 5T 8T 5T 5T 8T 8TS 8T 3T 8TS 8T 3T 3TS 3T 3T 3TS 3T 35T 3TS 3T 0T 35TS 35T 05T 05TS 05T T TS T 5T 5TS 5T 7TZ 7TS 7TZ 9TZ 9TS 9TZ M M L J J J J ZC3 05ZC3 05ZC3 05ZC3 0ZC3 05ZC3 05ZC3 0ZC3 0ZC3 0ZC3 307ZC3 0ZC3 0ZC3 307ZC3 307ZC3 307ZC3 309ZC3 307ZC3 307ZC3 309ZC3 309ZC3 309ZC3 310ZC3 309ZC3 309ZC3 310ZC3 310ZC3 310ZC3 313ZC3 310ZC3 310ZC3 313ZC3 313ZC3 313ZC3 31C3 313ZC3 313ZC3 31C3 13C3 31C3 31C3 13C3 31C3 31C3 313C3 31C3 31C3 31C3 31C3 31C3 0ZC3 0ZC3 0ZC3 0ZC3 0ZC3 0ZC3 0ZC3 0ZC3 0ZC3 0ZC3 307ZC3 0ZC3 0ZC3 307ZC3 307ZC3 307ZC3 309ZC3 307ZC3 307ZC3 309ZC3 309ZC3 309ZC3 310ZC3 309ZC3 309ZC3 310ZC3 310ZC3 310ZC3 11ZC3 310ZC3 310ZC3 11ZC3 11ZC3 11ZC3 13C3 11ZC3 11ZC3 13C3 13C3 13C3 313C3 13C3 13C3 313C3 313C3 313C3 31C3 31C3 31C3 31C3 31C3 31C3 31C3 31C3 31C3 31C3 31C3 31C3
8 ISWCNEB105, 8.8 Designed by Design orea Canadian Motor Representative Madison Industrial Equipment Vancouver Tel: (0) Fax: (0) 83 Calgary Tel: (03) 398 Fax: (03) Toronto Tel: (905) 1950 Fax: (905) ead Office 1 Jeonhadong, Donggu, Ulsan, orea Tel: ~8113 Fax Seoul 10, yedong, Jongnogu, Seoul, orea (Sales & Marketing) Tel: 8771, 77 Fax Orlando New Jersey London 35 Lake Lynda Drive, Suite 170, Orlando, Florida 3817, U.S.A. Tel: Fax Sylvan Avenue, Englewood Cliffs, NJ 073, U.S.A. Tel: Fax nd Floor, The Triangle, 517 ammersmith rove London, W 0L, U Tel: Fax Tokyo 8th Fl., Yurakucho Denki Bldg.171, Yurakucho, Chiyodagu, Tokyo, 000, Japan Tel: , Fax Osaka IRoom 5th Fl. NagahoriPlaza Bldg. 8, Minami Senba, Chuou, Osaka, Japan, Tel: 81157, 577 Fax Dubai Sofia Yangzhong Room 0, Al Bustan Centre Al Qusais P.O.Box 558 Dubai, U.A.E. Tel: Fax , Sofia 1, Rojen Blvd., Bulgaria Tel: Fax Lianzhong Avenue, Xinba Scientific and Technologic Zone, Yangzhong City, Jiangsu 11, China Tel: , 01 Fax , 031
5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA MG1 (2003) Part 31,
5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA M1 (003) Part 31, DefinitePurpose Inverter Fed Motors Inverter Shield TM
More informationPremium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 92
Premium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 9 Crown Triton TM Series Premium Efficiency Motors Experience Combined with Technology yundai Induction Motors use Finite Element
More informationFeatures and Benefits
Features and Benefits ELECTRICAL DESIN z 1 500 HP; 2, 4, 6 pole z 3600, 1800, 1200 RPM z 3 Phase, 60 Hz, 460V z Motors can be rerated for 380, 400 and 415 VAC at 50 Hz. z Designed to meet NEMA M1, M13,
More informationPowerful + Efficient + Reliable
1 THRU 50HP NEMA 140T THRU 449T HIGH EFFICIENCY ISO9001 CERTIFIED Powerful + Efficient + Reliable TEFC CAST IRON FRAMES CLASS F INSULATED 1.15 SERVICE FACTOR OVER SIZED BEARINGS LOW-LOSS ELECTRICAL GRADE
More informationNORDIC-PREMIUM EFFICIENCY
CANADIAN STANDARDS ASSOCIAT ION EEV NORDIC-PREMIUM EICIENCY CAST IRON PREMIUM EICIENCY ELECTRIC MOTORS VD COMPATIBLE Meets or exceeds NeMA MG-1 table 1-1 premium efficiency corona & spike resistant MAGNet
More informationGeneral Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
More informationMAX-E1 FAMILY NEMA PREMIUM EFFICIENCY
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY TYPE AEHE, AEHH8N, AEHH8NCF, AEUH8NDC Effective 05-01-13 Supercedes 08-01-11 APPLICATIONS: Fans & Blowers Compressor Any Severe Duty/ Petro-Chem/ Pumps Mixers Pulp
More informationSUPER-MAX INDUCTION MOTOR
Compliance Certificate No.CC014A CSA Listed No. 1077944 SUPER-MAX INDUCTION MOTOR PREMIUM EFFICIENCY SERIES CSA Certified for Class I Division 2 Groups A, B, C, D T3C TOTALLY ENCLOSED FAN COOLED FRAME:
More informationMAX-E1 HIGH EFFICIENCY. Severe Duty
MAX-E1 HIGH EFFICIENCY Severe Duty DESIGN FEATURES & CONSTRUCTION ALL MAX-E1 MOTORS DELIVER THESE IMPRESSIVE DESIGN FEATURES HPE - High Pulse Endurance Wire Non-hygroscopic, Class F insulation system High-grade,
More informationTHREE PHASE MOTORS RIGID BASE GENERAL PURPOSE Rigid Base
THREE PHASE MOTORS DRIP-PROOF RPM 60 HP Hz 1/4 1725 1725 S56 100027 $246 A 16 208-230/460 1.4 58.0 9.24 1/3 3450 48 101447 251 A 14 208-230/460 1.4 68.0 9.00 1725 48 100446 266 A 17 208-230/460 1.6 64.3
More informationHYUNDAI U-Series. Molded Case Circuit Breaker
HYUNDAI U-Series Molded Case Circuit Breaker U-Series Molded Case Circuit Breaker Wide and Powerful Range UAB, UCB [ up to 1600AF ] Compact Size High breaking capacity in 60mm depth, up to 2AF Application
More informationSevere duty cast iron frame motors
Severe duty cast iron frame motors When the going gets tough, these motors keep going SIMOTICS NEMA Low Voltage Motors www.usa.siemens.com/motors Siemens SIMOTICS low voltage severe duty motors Built to
More informationWATTSAVER PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE
PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE The line of premium efficiency motors is now inverter capable. LEESON s unique IRIS voltage-spike-resistant insulation system is standard at no extra cost. motors
More informationINDEX NEMA PREMIUM EFFICIENCY
INDEX S EED EXC DS R TS O DAR MEE E STAN CE THREE-PHASE MOTORS - FEATURES & LIST PRICES THREE-PHASE MOTORS TEFC - Foot-Mount................... A-51 A-54 TEFC C-Flange........................ A-55 ODP
More informationW22 NEMA Brake Motors - NEMA Premium
101 www.pamensky.com TEFC Standard Features Motors are compliant with DOE and NRCAN Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 208-230/460V, 575V Brake power supply: 220/230/240/460/575V Totally Enclosed
More informationGeneral purpose aluminum frame motors. The right choice for efficiency and performance. SIMOTICS NEMA Low Voltage Motors.
General purpose aluminum frame motors The right choice for efficiency and performance SIMOTICS NEMA Low Voltage Motors www.usa.siemens.com/motors Siemens GP100A Aluminum Frame Motors Precision construction,
More informationHyundai Cast-Resin Transformer
Hyundai CastResin Transformer Hyundai Heavy Industries, Global Leader We Are Your Best Business Partner Hyundai Heavy Industries has solidified its presence on the global market through its strong enterprise
More informationThree Phase Modifiable NEMA Horizontal Motors Accessories and Modifications
1. Altitude Standard motors are designed for 3,300 feet altitude and 40 C ambient temperature. Atmospheric conditions at higher altitudes inhibit the motor s ability to dissipate heat, resulting in an
More informationW22 Medium Voltage Motors TEFC - Severe Duty
101 www.pamensky.com W22 Medium Voltage Motors TEFC - Severe Duty Standard Features Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 1200V, 2300V, 2400V, 3300V, 4000V, 4160V & 6600V Totally Enclosed Fan
More informationGE Energy. X$D Ultra 841. NEMA Premium Extra Severe Duty Motors Frame HP
GE Energy X$D Ultra 841 Premium Extra Severe Duty Motors 143-449 Frame 0.75-300 HP GE sets the standard with powerful features. We are dedicated to the future. Since Edison s time at the leading edge of
More informationPowerful + Efficient + Reliable EEV CAST IRON PREMIUM EFFICIENCY ELECTRIC MOTORS 5 YEAR WARRANTY
1 TRU 50P NEMA 140T TRU 449T PREMIUM EICIENCY VD DUTY ISO9001 CERTIIED CANADIAN STANDARDS ASSOCIAT ION Powerful + Efficient + Reliable EEV VOLUME I CAST IRON PREMIUM EICIENCY ELECTRIC MOTORS 5 YEAR WARRANTY
More informationMAX-VH. Vertical Hollow Shaft Motors
MAX-VH Vertical Hollow Shaft Motors Specifications OTHER PERFORMANCE CONSTRUCTION APPLICATION RATING Item Type Of Motors Design Standards Voltages Frequency Output Range RPM (SYN.) Time Duty Frame Size
More informationSevere Duty is Standard with WEG W22 motors
W22 Severe Duty TEFC Severe Duty is Standard with WEG W22 motors W22 Severe Duty TEFC Severe Duty High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency
More informationCast Iron Frame Motors For Zone 21 Improved Efficiency EFF2
Motors Energy Automation Coatings Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP66, TEFC : 0.12 up to 250kW Frames: 63 up to 355M/L Voltage:
More information841XL PREMIUM EFFICIENCY MOTORS
841XL PREMIUM EFFICIENCY MOTORS 8 4 1 X L A C M O T O R S D E S I G N E D T O M E E T Y O U R S E V E RE D U T Y N E E D S As an original member of the NEMA Energy Task Force, Rockwell Automation has
More informationQuick and Easy Voltage Flexibility for NEMA and Metric IEC Motors Motors are re-rated from stock models to 575V in as little as (1) business day
Elektrim 7V s Quick and Easy Voltage Flexibility for NEMA and Metric IEC s s are re-rated from stock models to 7V in as little as () business day Available 7V s: -0 HP NEMA Premium Performance Series s
More informationSafe and Reliable. Flexible, Compact Design. Easy Installation and Maintenance
M E T A L - C L A D S W I T C H G E A R Safe and Reliable Flexible, Compact Design Easy Installation and Maintenance We build a better future! Hyundai HMS medium-voltage metal-clad switchgears and control-gears,
More informationX$DUltra NEMA Premium 7 Extra Severe Duty Motors Frame 3/4-250 HP
gmotors X$DUltra 7 841 NEMA Premium 7 Extra Severe Duty Motors 143-449 Frame 3/4-250 HP GE sets the standard... We are dedicated to the future. Since Edison s time at the leading edge of discovery, GE
More informationThe Best Value in Washdown Duty Motors and Drives
The Best Value in Washdown Duty Motors and Drives Long before we invested in the people, equipment and material required to produce Baldor Reliance Washdown Duty motors and drives, we invested our time
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More informationProduct Information Packet VEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1
Product Information Packet VEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationAluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationHorizontal Motors Conversions & Accessories Descriptions & Adders
Horizontal Motors Conversions & Accessories VERTICAL All Cast Iron Construction Cast Iron Conduit Box Adder: - 153 161 193 209 234 242 346 483 636 - - - Replacement of steel conduit box with cast iron
More informationGeneral purpose cast iron frame motors. The right choice for optimal durability, efficiency and performance. SIMOTICS NEMA Low Voltage Motors
General purpose cast iron frame motors The right choice for optimal durability, efficiency and performance SIMOTICS NEMA Low Voltage Motors www.usa.siemens.com/motors Siemens SIMOTICS low voltage cast
More informationInverter Speed Ratio Information
Inverter Speed Ratio Information Guidelines for Application of General Purpose,, Single Speed on Variable Frequency Drives Meets NEMA MG1-2006 Part 30 and Part 31 Section 4.4.2 Unless stated otherwise,
More informationNEMA & IEC Product Features and Benefits
NEMA & IEC Product Features and Benefits BEAUTY BENEATH THE SURFACE. Looking at a Techtop electric motor, it would be understandable if you thought it was just another NEMA or IEC squirrel-cage induction
More informationDATA SHEET. Three Phase Induction Motor - Squirrel Cage. Customer : Product code : : W22 NEMA Premium Efficiency Three-Phase
DATA SHEET Frame Output Poles Frequency Rated voltage Rated current L. R. Amperes LRC No load current Rated speed Slip Rated torque Locked rotor torque Breakdown torque Insulation class Service factor
More informationProduct Information Packet IDXCM7544T-C 5HP,1750RPM,3PH,60HZ,184TC,0642M,XPFC,F1
Product Information Packet IDXCM7544T-C 5HP,1750RPM,3PH,60HZ,184TC,0642M,XPFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationSevere Duty / IEEE TEFC Motors SD100 IEEE841 / RGZEESDX
/ IEEE 841 - TEFC Motors Introduction The IEEE 841 motors meets or exceeds IEEE 841-2001 standards for energy efficiency, high performance, variable speed operation, rugged construction and long service
More informationHYUNDAI INVERTER Powerful Operation & High Performance
HYUNDAI INVERTER Powerful Operation & High Performance HYUNDAI Hyundai Heavy Industries realizes the satisfaction of customer with its best products. Hyundai N-Series inverters with characteristics of
More informationProduct Information Packet EM4313T 75HP,3550RPM,3PH,60HZ,365TS,1464M,TEFC,F
Product Information Packet EM1T 75HP,550RPM,PH,60HZ,65TS,16M,TEFC,F Copyright All product information within this document is subject to A Motors and Mechanical Inc. copyright protection, unless otherwise
More informationProduct Information Packet EM3611T 3HP,1760RPM,3PH,60HZ,182T,3632M,TEFC,F1
Product Information Packet EM3611T 3HP,1760RPM,3PH,60HZ,182T,3632M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationIndustrial and Commercial Duty IEC Motors
Industrial and Commercial Duty IEC Motors A Regal Brand Five product families delivering a world of opportunity LEESON Passport Series IEC Motors. There s a world of opportunity right here at home. The
More informationNEMA Premium Efficiency T-Frame Motors. Three-Phase, TEFC Enclosures RELIABILITY MATTERS
NEMA Premium Efficiency T-Frame Motors Three-Phase, TEFC Enclosures RELIABILITY MATTERS RELIABILITY MATTERS Aurora Motors a leading global supplier of NEMA premium vertical pump motors and T-frame motors
More informationAESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM
More informationProduct Information Packet VM HP,1725RPM,3PH,60HZ,56C,3413M,TEFC,F1
Product Information Packet VM3534.33HP,1725RPM,3PH,60HZ,56C,3413M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationBrake Motors Aluminium Frame Improved Efficiency EFF2
Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationProduct Information Packet IDXCM7542T-C 3HP,1755RPM,3PH,60HZ,182TC,0632M,XPFC,F1
Product Information Packet IDXCM7542T-C 3HP,1755RPM,3PH,60HZ,182TC,0632M,XPFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationHAIE2 -Efficiency and reliability for industry
HAIE2 -Efficiency and reliability for industry High performance with energy efficiency, this is the meaning of the new CAG electric motor. Low cost and best quality and long lifetime have been the basis
More informationEnergy Saving Three Phase Motors
e-drive Energy Saving Three Phase Motors IEC frames 56 to 400 Outputs 0.09 to 630 IE2 MEPS2006 Type: AHE Aluminium Motors Type: HE Cast-Iron Motors 1 When you need all the features of a premium quality
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More information: B3; B5; B14; B34; B35; V1
ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia
More informationElectric Motors
SELECT Electric Motors To compete in today s global marketplace, you need a supplier who can provide electric motors that meet your quality, cost, and delivery requirements. That is why you rely on IDC
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Vertical Hollowshaft Electric Motors C O N T E N T S
Revised 04/14/2016 SPECIFICATIONS - DETAILED PROVISIONS Section 16151 - Vertical Hollowshaft Electric Motors C O N T E N T S PART 1 - GENERAL... 1 1.01 SCOPE... 1 1.02 SPECIFIC PROJECT REQUIREMENTS...
More informationOver 525 Stock Motor Ratings. The Right Pump Motor for your Application. Leadership in Premium Efficiency. 1
Baldor Pump Motors Baldor Reliance is the leading supplier of Pump Motors to meet industrial and commercial applications. From industrial waste water to commercial pool pump motors Baldor Reliance pump
More informationMedium Voltage Motors and Soft Starters
TEFC Severe Duty Motors TEFC Motors 2300 4160V................................................. A-252 TEFC Motors Add-On Modifications............................................. A-253 TEFC 2300V - Electrical
More informationProduct Information Packet CP500808LR-4 800HP,897RPM,3PH,60HZ,G50,A95260M,TEFC,F
Product Information Packet CP500808LR-4 800HP,897RPM,3PH,60HZ,G50,A95260M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationProduct Information Packet ECP84400T-4 100HP,1785RPM,3PH,60HZ,405T,A40064M,TEFC
Product Information Packet ECP84400T-4 100HP,1785RPM,3PH,60HZ,405T,A40064M,TEFC Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationA Full Line of Low Voltage IEC Motors In-Stock
BUILT TO PERFORM WHERE OTHERS FAIL A Full Line of Low Voltage IEC Motors In-Stock Distributed by Elektrim Motors Authorized Distributor: www.elektrimmotors.com or call 855-Go-Elektrim 0.08-220HP Low Voltage
More informationDesign Standard. Electric Motors. Detailed specifications follow. PART 1 - GENERAL
Design Standard Detailed specifications follow. PART 1 - GENERAL 1.01 SCOPE This design guidelines contained herein include the requirements of electric motors utilized for electric motor driven systems
More informationsteel standard SST DUCK components Epoxy Resin Rated Insulation System recognized stainless steel output shaft seal
Premium Efficiency Washguard Motors - Now Available! WASHGUARD MOTORS WASHGUARD MOTORS AVAILABLE IN FIVE STYLES Maximum service in critically clean or corrosive environments PREMIUM WASHGUARD ALL-STAINLESS
More information200 & 575 Volt Motors. 200 Volt, Three Phase, TEFC, Foot Mounted. 1/2 thru 50 Hp NEMA 56C thru 326T
Farm Duty 200 Volt, TEFC, Foot Mounted 200 & 7 Volt 1/2 thru 0 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power.
More informationProduct Information Packet ECP84404T-4 75HP,1185RPM,3PH,60HZ,405T,A4072M,TEFC,F
Product Information Packet ECP84404T-4 75HP,1185RPM,3PH,60HZ,405T,A4072M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationW21 HIGH EFFICIENCY GENERAL PURPOSE MOTORS
W21 HIGH EFFICIENCY MOTORS!"#$&'#(&)*"&+,-&"./&0,,12#3&4,.5&!"00&678997:;?@&ABCD7=EF=G Data subject to change without notice. PDF processed with CutePDF evaluation edition www.cutepdf.com :7BD ROLLED
More informationProduct Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754
Product Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More information1LG0 Low-voltage Motors
Low-voltage motors up to 315kW Catalog D81.5.1 1LG Low-voltage Motors Answers for industry. 1 Table of Contents Overview 3 Motor standards 5 Mechanical design 6 Electrical design 1 Converter fed application
More informationProduct Information Packet ECP50504L-4 500HP,1789RPM,3PH,60HZ,5010,TEFC,F1
Product Information Packet ECP50504L-4 500HP,1789RPM,3PH,60HZ,5010,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More information7.0 High HP Low and Medium Voltage
TABLE OF CONTENTS 7.0 High HP Low and 7.1 Quantum LMV - TEFC Low Voltage 7.7 Quantum LMV - TEFC 7.12 449 Frame TEFC 7.16 WPII, TEFC, TEAAC Standard Features 7.17 WPII Pricing and Kits 7.20 Pegasus MHV
More information10-750kW / DOOSAN Engine Mounted Control Panel kW / MTU Engine Floor-Standing Control Panel
HHI, Hyundai Heavy Industries Co. Ltd., is one of the world s leading synchronous Diesel Generator Set manufacturers. With proven performance, Hyundai s Diesel Generator Sets meet or exceed our customer
More informationJRP Motors 1 and 3 Phases TEFC 56C Stainless and Rolled Steel Motors
JRP Motors and 3 Phases TEFC 56C Stainless and Rolled Steel Motors /3-3 HP PH & 3PH TEFC 60 Hz AC Foot Mounted and Round Body C-Face Motors Features Inverter Duty Rated: 3:CT & 5:VT (3-Phase only) Service
More informationNEMA explosion-proof AC motors. Individual solutions are our standard
NEMA explosion-proof AC motors Individual solutions are our standard BARTEC VARNOST The plant itself came into being in 1957 as one of the small working units of the Zagorje coal mine. Five years later,
More informationProduct Information Packet ECP84314T-4 60HP,1780RPM,3PH,60HZ,364T,TEFC,FOOT
Product Information Packet ECP84314T-4 60HP,1780RPM,3PH,60HZ,364T,TEFC,FOOT Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationSECTION MOTOR REQUIREMENTS for HVAC
PART 1 GENERAL 1.1 SECTION INCLUDES A. Single-phase electric motors B. Three-phase electric motors 1.2 REFERENCES SECTION 23 05 13 MOTOR REQUIREMENTS for HVAC A. ABMA 9 - Load Ratings and Fatigue Life
More informationProducts & Services EQ Series AC Drives. TEAMMaster WOUND ROTOR MOTORS WORLD SERIES SYNCHRONOUS MOTORS. EXPLOSION PROOF (Division 1, Zone 1)
630-543-7867 Products & Services EQ7 1-1000 hp Intelligent Keypad with Extensive Diagnostics Select Any of 4 Control Methods - V/ Hz - Dynamic Torque - Sensorless Vector - Closed-loop Vector Quick Setup
More informationList Price. Mult. Sym. C Dim. Single Phase
Single and Three Phase, Foot Mounted Explosion Proof 1/4 thru 300 48 thru 449TY Applications: Ideal for use where hazardous fumes or dust may be present. Features: U.L. and CSA approved for Class I, Group
More information1/4 thru 300 Hp NEMA 48 thru 449TY. List Price. Mult. Sym. C Dim. Single Phase
Single and Three Phase, Foot Mounted Explosion Proof 1/4 thru 300 48 thru 449TY Applications: Ideal for use where hazardous fumes or dust may be present. Features: U.L. and CSA approved for Class I, Group
More informationModifiable TITAN Horizontal Motors Accessories and Modifications
36. Rotor, Standard And Optional Construction Standard rotor construction of 449, 5000 and 5800 frame TITAN products is typically die-cast aluminum. 720 RPM and slower is typically fabricated aluminum.
More information1/2 thru 50 Hp NEMA 56C thru 326T
200 Volt, TEFC, Foot Mounted Cast Iron Foot Mounted 200 & 7 Volt 1/2 thru 0 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200
More informationDATA SHEET. Three Phase Induction Motor - Squirrel Cage. Customer : Product code : : W22 NEMA Premium Efficiency Three-Phase
DATA SHEET Frame Output Poles Frequency Rated voltage Rated current L. R. Amperes LRC No load current Rated speed Slip Rated torque Locked rotor torque Breakdown torque Insulation class Service factor
More informationNEMA Premium. Efficiency Motors SIE series EISA Product Catalogue
NEMA Premium Efficiency Motors IE series NEMA Premium EIA 2007 Product Catalogue NEMA Premium Motors IE series ENERGY LEGILATION UMMARY The previous legislation affecting the energy efficiency of motors
More informationProduct Information Packet CEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1
Product Information Packet CEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationExplosion Proof Motors
SINGLE-PHASE Foot Mount...A-110 C-Face Foot Mount...A-110 THREE-PHASE Foot Mount...A-112 C-Face Foot Mount...A-116 C-Face Footless...A-117 JP Foot Mount...A-117 ATEX Foot Mount...A-120 A-108 Fractional
More informationProduct Information Packet VEUHM3615T 5HP,1750RPM,3PH,60HZ,184TC,3642M,TEFC,F1
Product Information Packet VEUHM3615T 5HP,1750RPM,3PH,60HZ,184TC,3642M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationInverter Duty and Inverter Duty - Vector Performance AC Motor Product Line
Large AC Inverter Duty and Inverter Duty - Vector Performance AC Motor Product Line Inverter Duty 1/3-2 HP, 56-140 frame sizes, Explosion Proof, Class I, Groups C & D, Class 2, Groups F & G, XT - Extra
More informationProduct Information Packet EM3613T 5HP,3450RPM,3PH,60HZ,184T,3630M,TEFC,F1
Product Information Packet EM3613T 5HP,3450RPM,3PH,60HZ,184T,3630M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationAESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY
AESV / AESU / AESV-LA Series Squirrel Cage Induction Motor AESV1S / AESU1S / AESV1S-LA (IE1) STANDARD EFFICIENCY AESV2S / AESU2S / AESV2S-LA (IE2) HIGH EFFICIENCY AESV3S / AESU3S / AESV3S-LA (IE3) PREMIUM
More informationA. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.
PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the
More informationAEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1
AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 STANDARD AND SPECIFICATION Performance: Meet the requirement of Singapore standard
More informationMedium Voltage Induction Motors. 21-L Series New High Efficiency Design for High Capacity Applications 450 kw 18,500 kw (600 HP 25,000 HP)
Medium Voltage Induction Motors 21-L Series New High Efficiency Design for High Capacity Applications 450 kw 18,500 kw (600 HP 25,000 HP) series: Combining over 100 years of experience with innovative
More informationA. Fan motors and associated equipment shall be sized to operate at 110% of calculated loads and capacities.
PART 1: GENERAL 1.01 This design guidelines contained herein includes the requirements electric motors utilized for electric motor driven systems at Texas State University. It is the intention of this
More informationProduct Information Packet CEM3587T 2HP,1750RPM,3PH,60HZ,145TC,0527M,TEFC,F1
Product Information Packet CEM3587T 2HP,1750RPM,3PH,60HZ,145TC,0527M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationSHADED RATINGS ARE CAST IRON FRAMES
Gearmotors and NEMA AC C-Face Kits for Field Conversion Features: Complete kits with all hardware necessary for converting 56 through 445T frame rigid base motors to C-Face mounting with base. For a conversion,
More informationCEBM3615T 5HP,1750RPM,3PH,60HZ,184TC,3642M,TEFC,F1
Product Information Packet CEBM3615T 5HP,1750RPM,3PH,60HZ,184TC,3642M,TEFC,F1 Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
More informationPowered to Perform. Electric Motors
Powered to Perform Electric Motors Built and Tested to Deliver Trans-Power brand motors use tested, proven designs to keep running strong day after day. They also include features that translate into reliability
More informationProduct Information Packet SUM HP,1725RPM,3PH,60HZ,180TY,TENV,FOOTLES
Product Information Packet SUM70504-4 5HP,1725RPM,3PH,60HZ,180TY,TENV,FOOTLES Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationAC Induction Motors. Installation and operating instructions
AC Induction Motors Installation and File No: 48.80 Date: january 28, 2014 Supersedes: 48.80 Date: july 30, 2013 contents Receiving inspection and handling 4 Installation / mounting 4 Location 5 Electrical
More informationSEWPCC UPGRADING/EXPANSION PROJECT BID OPPORTUNITY SECTION LOW-VOLTAGE AC INDUCTION MOTORS
SECTION 26 20 00 LOW-VOLTAGE AC INDUCTION MOTORS SEWPCC UPGRADING/EXPANSION PROJECT PART 1 GENERAL 1.1 RELATED SECTIONS A. This section applies only when referenced by a motor-driven equipment specification.
More informationApplications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power.
200 Volt, TEFC, Foot Mounted 1/2 thru 0 200 & 7 Volt 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power. Features:
More informationIDNM3661T 3HP,1760RPM,3PH,60HZ,184TC,0636M,TENV,F1
Product Information Packet IDNM3661T 3HP,1760RPM,3PH,60HZ,184TC,0636M,TENV,F1 Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
More information