Textiles 1) Fibre composition - Qualitative analysis (Internal MK method) 2) Fibre composition - Binary fibre mixtures (EN ISO 1833-series) 3) Fibre composition - Ternary fibre mixtures (EN ISO 1833-2) 4) Fibre composition - DuPont method for Nomex fibre (Internal DuPont method) 5) Linear density from packages (skein method) (EN ISO 2060) 6) Linear density of yarn removed from fabric (ISO 7211-5) 7) Determination of fibre diameter (ISO 137) 8) Determination of twist in yarns - Direct counting method (EN ISO 2061) 9) Determination of twist in yarns - Untwist / re-twist method (ISO 17202) 10) Determination of twist in yarns removed from fabric (ISO 7211-4) 11) Mass per unit length and mass per unit area (ISO 3801) 12) Mass per unit area using small samples of fabric (EN 12127) 13) Mass per unit area of nonwovens (EN 29073-1, ISO 9073-1) 14) Mass per unit area of rubber or plastics coated fabrics (EN ISO 2286-2) 15) Number of threads per unit length of woven fabric (EN 1049-2, ISO 7211-2) 16) Number of stitches per unit length and unit area of knitted fabric (EN 14971) 17) Dimensional change in domestic washing and drying (EN ISO 3759, EN ISO 5077, EN ISO 6330) 18) Dimensional change of fabrics induced by cold-water immersion (EN ISO 3759, ISO 7771) 19) Tensile strength and breaking elongation fabric - Strip method (EN ISO 13934-1) 20) Tensile strength and breaking elongation fabric - Grab method (EN ISO 13934-2) 21) Tensile strength and breaking elongation of yarn (EN ISO 2062) 22) Tensile strength and elongation of nonwovens (EN 29073-3, ISO 9073-3) 23) Tensile strength and elongation at break of rubber or plastics coated fabrics (EN ISO 1421) 24) Determination of maximum force to seam rupture - Strip method (EN ISO 13935-1) 25) Determination of maximum force to seam rupture - Grab method (EN ISO 13935-2) 26) Tensile breaking force and elongation of glass fabric (ISO 4606) 27) Tear properties of fabrics - Single tear method (trouser-shaped) (EN ISO 13937-2) 28) Tear properties of fabrics - Single tear method (wing-shaped) (EN ISO 13937-3) 29) Tear properties of fabrics - Double tear test (tongue-shaped) (EN ISO 13937-4) 30) Tear resistance of nonwovens (EN ISO 9073-4) 31) Tear resistance by constant rate of tear of rubber or plastics coated fabrics (EN ISO 4674-1) 32) Abrasion resistance of fabrics - Specimen breakdown (EN ISO 12947-2) 33) Abrasion resistance of fabrics - Mass loss (EN ISO 12947-3) 34) Abrasion resistance of fabrics - Assessment of appearance change (EN ISO 12947-4) 35) Abrasion resistance of rubber or plastics coated fabrics (EN ISO 5470-2) 36) Surface fuzzing and pilling by modified Martindale method (EN ISO 12945-2) 37) Surface fuzzing and pilling by piling box method (EN ISO 12945-1) 38) Crease recovery angle (EN 22313, ISO 2313) 39) Resistance to surface wetting - Spray test (EN ISO 4920) 40) Resistance to water penetration - Hydrostatic pressure test (EN 20811, ISO 811) 41) Oil repellency (EN ISO 14419) 42) Colour fastness, general (EN ISO 105-A01, EN 20105-A02, ISO 105-A02, EN 20105-A03, ISO 105-A03) 43) Colour fastness to domestic and commercial laundering (EN ISO 105-C06) 44) Colour fastness to washing with soap and soda (EN ISO 105-C10) 45) Colour fastness to dry cleaning (EN ISO 105-D01) 46) Colour fastness to water (EN ISO 105-E01) 47) Colour fastness to sea water (EN ISO 105-E02) 48) Colour fastness to chlorinated water (EN ISO 105-E03) MK Test methods rev-09-2015 1/5
49) Colour fastness to perspiration (EN ISO 105-E04) 50) Colour fastness to spotting - Water (EN ISO 105-E07) 51) Colour fastness to hot pressing (EN ISO 105-X11) 52) Colour fastness to rubbing (EN ISO 105-X12) 53) Colour fastness to bleaching - Hypochlorite (EN 20105-N01, ISO 105-N01) 54) Colour fastness to rubbing - Organic solvents (EN ISO 105-D02) 55) Colour fastness to artificial light (EN ISO 105-B02) 56) ph of aqueous extract (EN ISO 3071) 57) Thickness of textiles and textile products (EN ISO 5084) 58) Thickness of nonwovens (EN ISO 9073-2) 59) Air permeability (EN ISO 9237) 60) Width and length of fabrics (EN 1773, ISO 3932, ISO 3933) 61) Ignition of vertically oriented specimens (EN ISO 6940) 62) Flame spread properties of vertically oriented specimens (EN ISO 6941) 63) Detection of the use of certain azo colorants accessible with or without extraction (EN 14362-1) 64) Bursting properties (EN ISO 13938-1) 65) Slippage resistance - Fixed seam opening method (EN ISO 13936-1) 66) Slippage resistance - Fixed load method (EN ISO 13936-2) 67) Colorimetry (EN ISO 105-J01, EN ISO 105-J02, EN ISO 105-J03) 68) Spirality after laundering (ISO 16322-2) 69) Coating adhesion (EN ISO 2411) 70) Formaldehyde content (EN ISO 14184-1) 71) Glass fabrics - Loss on ignition (ISO 1887) Leather 72) Thickness (EN ISO 2589) 73) Tensile strength and elongation (EN ISO 3376) 74) Tear load - Single edge tear (EN ISO 3377-1) 75) Tear load - Double edge tear (EN ISO 3377-2) 76) Free fatty content (EN ISO 4048) 77) Flex resistance by flexometer method (EN ISO 5402-1) 78) ph value (EN ISO 4045) 79) Temperature shrinkage in water (until 100 C) (HRN G.S2.039) 80) Moisture and ash content (HRN G.S2.010) 81) Sulphate content in the ash (EN ISO 4047) 82) Water vapour permeability (EN ISO 14268) 83) Water vapour absorption (EN ISO 17229) 84) Water penetration and absorption (EN ISO 5403-1) 85) Static water absorption (Kubelka) (EN ISO 2417) 86) Colour fastness to rubbing (EN ISO 11640) 87) Colour fastness to perspiration (EN ISO 11641) 88) Colour fastness to water (EN ISO 11642) 89) Chromium (VI) content (EN ISO 17075) 90) Azo colorants (EN ISO 17234-1) 91) Colour fastness to water spotting (EN ISO 15700) 92) Resistance to grain cracking (EN ISO 3378) 93) Water resistance of heavy leathers (EN ISO 5404) MK Test methods rev-09-2015 2/5
Geosynthetics - Geotextiles 94) Thickness (EN ISO 9863-1) 95) Mass per unit area (EN ISO 9864) 96) Tensile strength (EN ISO 10319) Protective gloves 97) Innocuousness - ph value (EN 420, c.4.3.2) 98) Innocuousness - Chromium (VI) content (EN 420, c.4.3.3) 99) Glove size (EN 420, c.6.1) 100) Glove dexterity (EN 420, c.6.2) 101) Water vapour transmission (EN 420, c.6.3) 102) Water vapour absorption (EN 420, c.6.4) 103) Abrasion resistance (EN 388, c.6.1) 104) Cut resistance (EN 388, c.6.2) 105) Tear resistance (EN 388, c.6.3) 106) Puncture resistance (EN 388, c.6.4) 107) Burning behaviour (EN 407, c.6.3) 108) Radiant heat (EN 407, c.6.6) 109) Time needed for removing gloves (EN 659, c.3.15) 110) Whole glove integrity test (water leakage) (ISO 15383, Annex A) 111) Chain-saw cut resistance (EN 381-4; EN 381-7) Protective clothing 112) Burning behaviour - Limited flame spread (EN ISO 15025) 113) Burning behaviour - Limited flame spread index (EN ISO 14116) 114) Electrostatic properties - Surface resistivity (EN 1149-1) 115) Electrostatic properties - Electrical resistance through material (EN 1149-2) 116) Puncture resistance (EN 863) 117) Abrasion resistance (EN 530) 118) Chain-saw cut resistance - leg protectors (EN 381-2; EN 381-5) 119) Chain-saw cut resistance - gaiters (EN 381-8; EN 381-9) 120) Chain-saw cut resistance - upper body protectors (EN 381-10; EN 381-11) 121) Area of visible material (EN ISO 20471) 122) Ergonomic principles (EN 13921) 123) Size designation of clothes (EN 13402-1 / ISO 3635; EN 13402-2; EN 13402-3) 124) Convective heat resistance (ISO 17493) 125) Resistance of materials to penetration by liquids (EN ISO 6530) 126) One surface exposure to fuel oil (EN 343, c.4.2; c.5.1.3.5) 127) Chromaticity and luminance factor (EN ISO 20471, c.7.2) 128) Radiant heat (EN ISO 6942) 129) Convective heat (flame heat transmission) (EN 367; ISO 9151) Protective footwear 130) Ergonomic features (EN ISO 20344, c.5.1) 131) Upper / outsole and sole interlayer bond strength (EN ISO 20344, c.5.2) 132) Internal toecap length (EN ISO 20344, c.5.3) 133) Toecap impact resistance (EN ISO 20344, c.5.4) 134) Toecap compression resistance (EN ISO 20344, c.5.5) 135) Corrosion of metallic toecap and inserts (EN ISO 20344, c.5.6) MK Test methods rev-09-2015 3/5
136) Leakproofness (EN ISO 20344, c.5.7) 137) Dimensional conformity of inserts (EN ISO 20344, c.5.8.1) 138) Penetration resistance of the sole (EN ISO 20344, c.5.8.2) 139) Electrical resistance (EN ISO 20344, c.5.10) 140) Footwear slip resistance (EN ISO 20344, c.5.11; EN ISO 13287) 141) Insulation against heat (Heat resistance) (EN ISO 20344, c.5.12) 142) Insulation against cold (Cold resistance) (EN ISO 20344, c.5.13) 143) Energy absorption of seat region (EN ISO 20344, c.5.14) 144) Resistance to water for whole footwear (EN ISO 20344, c.5.15.1) 145) Thickness of upper (EN ISO 20344, c.6.1) 146) Height of the upper (EN ISO 20344, c.6.2) 147) Determination of tear strength of the upper, lining and/or tongue (EN ISO 20344, c.6.3) 148) Tear strength of uppers, linings and insocks (EN 13571) 149) Tensile properties of upper material (EN ISO 20344, c.6.4) 150) Flexing resistance of rubber upper (EN ISO 20344, c.6.5.2) 151) Resistance to cut growth (Ross flexing test) (ISO 4643, Annex C; ISO 5423, Annex C) 152) Water vapour permeability (EN ISO 20344, c.6.6; EN 13515) 153) Water vapour absorption (EN ISO 20344, c.6.7; EN 13515) 154) Water vapour coefficient (EN ISO 20344, c.6.8) 155) Innocuousness (ph) (EN ISO 20344, c.6.9) 156) Innocuousness (Chromium (VI)) (EN ISO 20344, c. 6.11) 157) Abrasion resistance of lining and insock (EN ISO 20344, c.6.12, EN 13520) 158) Water penetration and water absorption for upper (EN ISO 20344, c.6.13) 159) Resistance of upper to cutting (EN ISO 20344, c.6.14) 160) Insole thickness (EN ISO 20344, c.7.1) 161) Water penetration and water absorption insole (dynamic) (EN ISO 20344, c.7.2; EN 12746) 162) Water penetration and water absorption insole (static) (EN 12746) 163) Abrasion resistance of insole (EN ISO 20344, c.7.3; EN 12747) 164) Outsole thickness (EN ISO 20344, c.8.1) 165) Tear strength of outsole (EN ISO 20344, c.8.2; EN 12771) 166) Outsole abrasion resistance (EN ISO 20344, c.8.3; EN 12770) 167) Flexing resistance of outsole (EN ISO 20344, c.8.4; EN ISO 17707) 168) Resistance to hydrolysis of outsole (EN ISO 20344, c.8.5) 169) Resistance to fuel oil (EN ISO 20344, c.8.6.1) 170) Outsole dimensions for firefighters footwear (EN 15090:2007, c.6.7) 171) Radiant heat resistance of firefighters footwear upper (EN 15090, c.7.2) 172) Burning behaviour of firefighters footwear (EN 15090, c.7.3) 173) Chain-saw resistance (EN ISO 17249, c. 6.2-6.4; EN 381-3) Rubber 174) Density (ISO 2781) 175) Abrasion resistance (ISO 4649) 176) Indentation hardness, Shore A (ISO 7619-1) 177) Thickness (ISO 23529) 178) Tensile properties (ISO 37) Products for building applications 179) Mechanical properties of glass fibre meshes (EN 13496) 180) Burning behaviour (for class B2) (DIN 4102-1, c.6.2) MK Test methods rev-09-2015 4/5
Other 181) Furniture - Assessment of the ignitability of upholstered furniture by smouldering cigarette (EN 1021-1) 182) Furniture - Assessment of the ignitability of upholstered furniture by match flame equivalent (EN 1021-2) 183) Furniture - Assessment of the ignitability of bedding items by smouldering cigarette (EN ISO 12952-1) 184) Furniture - Assessment of the ignitability of bedding items by match flame equivalent (EN ISO 12952-2) 185) Toys - Mechanical and physical properties (EN 71-1) 186) Toys - Flammability (EN 71-2) 187) Zippers - Types and dimensions of zippers (DIN 3417, DIN 3418) 188) Zippers - Mechanical properties of zippers (DIN 3419-1, c.6.2.3) 189) Plastics - Tensile properties (EN ISO 527-1) 190) Plastics - Tear resistance - Single tear method (trouser-shaped) (EN ISO 6383-1) 191) Plastics - Tensile properties of security seals (Internal MK method) 192) Buoyant aids - Integrity of the entire assembly (EN ISO 13138-1, Annex G) 193) Buoyant aids - Resistance of markings to saliva (EN ISO 13138-1, Annex A) 194) Buoyant aids - Residual buoyancy (EN ISO 13138-1, Annex A; EN ISO 12402-9) 195) Burning behaviour of interior materials for vehicles (ISO 3795) MK Test methods rev-09-2015 5/5