Fluid Control Contents Solenoid Valves with Differential ressure Series Material ressure Temperature Function age 8410 Brass 1/4" NT - " NT 1.45 to 3 psi 194 F / - 8680 Brass 1/4" NT - 1" NT 1.45 to 145 psi 30 F / -4 85310 Brass 1/4" NT - " NT 7 to 580 psi 194 F / -6 85330 Brass 1/4" NT - 1" NT 14.5 to 363 psi 39 F / -10 84080 O GF 30 (NSF) 1/" NT - 3/4" NT 4 to 15 psi 1 F / -1 8740 Stainless steel 1/4" NT - " NT 1.45 to 3 psi 194 F / -16-1
Series 8410 /-way valves Orifice 0.3 to.0 For neutral gases and liquids Indirectly solenoid actuated Diaphragm valves Internal thread 1/4" NT to " NT Operating pressure: 1.45 to 3 psi (0.1 to 16 bar) (see technical data) Description Solenoid valve for air, water, and other neutral fluids Switching function: normally closed Flow direction: determined Differential pressure: 1.45 psi (0.1 bar) required [4.35 psi (0.3 bar for EDM)] Fluid temperature: 14 F up to max. 194 F (-10 C up to max. +90 C) mbient temperature: 14 F up to max. 1 F (-10 C up to max. +50 C) Mounting position: as required, preferably with solenoid vertical on top Material Body: Seat seal: Internal parts: size NT Orifice inch Cv-Value Brass NBR Stainless steel, VDF For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - igh flow rate - Damped operation - Functional compact design - Solenoid interchangeable without tools (Click-on ) - articularly suitable as a water valve according to DIN EN 60730--8 Technical data * Operating pressure psi NBR Normally open Manual override aa FM 30 F (110 C) bb aab b EDM 30 F (110 C) 00 01 0 03 14 1/4 0.3. 8410XX.9101.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 3/8 0.4 3.5 8411XX.9101.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 1/ 0.5 4.4 841XX.9101.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 3/4 0.8 6.9 8413XX.9101.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 1 1.0 10.9 8414XX.9101.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 1 1/4 1.3 6.5 8415XX.9101.XXXXX 1.45-145 - 1.45-145 1.45-145 4.35-145 1 1/4 1.3 6.5 8415XX.9151.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 1 1/ 1.6 8.8 8416XX.9101.XXXXX 1.45-145 - 1.45-145 1.45-145 4.35-145 1 1/ 1.6 8.8 8416XX.9151.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3.0 47. 8417XX.9101.XXXXX 1.45-145 - 1.45-145 1.45-145 4.35-145.0 47. 8417XX.9151.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 * For orders please state voltage and frequency, e.g.: 84100.9101.3050 for 30V 50z or 84100.9101.0400 for 4V DC Solenoid 9101 / 9151 (standard voltages) DC C 50z 60z 4V 4V - - 110V 10V 30V 0V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 ower consumption Solenoid DC C Inrush olding 9101 8W 15V 1V 9151 18W 45V 35V Electrical connector according to DIN EN 175301-803 (included) The solenoids are U listed and CS approved - www.norgren.com/fluid
Series 8410 Mounting bracket size NT 1/4, 3/8, 1/ 158986 3/4 158991 1 158996 1 1/4, 1 1/ 159005 159007 Drawing legend Index Description B 101 Valve body 10 Valve cover *103 Diaphragm 104 llen head screw *105 ressure spring 400 Solenoid 701 Core tube *70 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip *707 O-ring 1400 Electrical connector (enclosed) * service kit consists of these individual parts. 1400 105 103 104 10 101 400 701 706 705 704 707 703 70 With solenoid 9101 size NT B 1/4.36 1.73 3.09.64 3/8.36 1.73 3.09.64 1/.64 1.73 3.19.64 3/4 3.15 1.97 3.46.81 1 3.74.44 3.84 3.03 1 1/4 5.0 3.6 4.90 3.76 1 1/ 5.0 3.6 4.90 3.76 6.30 4.9 5.61 4.5 Service kits For valves with solenoid 9101 841000, 841100, 84100 15674 841300 15675 841400 15676 841500, 841600 159344 841700 159367 For valves with solenoid 9151 With solenoid 9151 size NT B 1 1/4 5.0 3.6 5.59 4.45 1 1/ 5.0 3.6 5.59 4.45 6.30 4.9 6.30 4.94 Further options on request: - Explosion protected version - Flange connections - Sealed core tube - ulse model in DC only - ow power consumption W (only 4V DC) - With NT thread Further options (solenoids) XXXXXXX.9136 Solenoid in protection class x II GD EEx m II T4 T 130 C, with 3 m connection cable 841500, 841600 159373 841700 15938-3
/-way valves Orifice 0.3 to 1.0 For hot water and steam Indirectly solenoid actuated Diaphragm valves Internal thread 1/4" NT to 1" NT Operating pressure: 1.45 to 145 psi (0.1 to 10 bar) Series 8680 Click-on Solenoid interchangeable without tools Description (standard valve) Solenoid valve for hot water and steam Switching function: normally closed Flow direction: determined Differential pressure: 1.45 psi (0.1 bar) required Fluid temperature: max. 30 F (+150 C) mbient temperature: max. 140 F (+60 C) Mounting position: as required, preferably with solenoid vertical on top Material Body: Seat seal: Internal parts: Brass NBR Stainless steel, Brass a a b b For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - igh flow rate - Damped operation - Functional compact design - Solenoid interchangeable without tools (Click-on ) - articularly suitable as a water valve according to DIN EN 60730--8 Technical data Operating pressure psi size NT Orifice inch Cv-Value * NBR Normally open Manual override 00 01 0 1/4 0.3.0 8680XX.9101.XXXXX 1.45-145 1.45-145 1.45-145 3/8 0.4 3.1 8681XX.9101.XXXXX 1.45-145 1.45-145 1.45-145 1/ 0.5 3.9 868XX.9101.XXXXX 1.45-145 1.45-145 1.45-145 3/4 0.8 6.3 8683XX.9101.XXXXX 1.45-145 1.45-145 1.45-145 1 1.0 9.8 8684XX.9101.XXXXX 1.45-145 1.45-145 1.45-145 * For orders please state voltage and frequency, e.g.: 86800.9101.3050 for 30V 50z or 86800.9101.0400 for 4V DC Solenoid 9101 (standard voltages) ower consumption DC C 50z 60z 4V 4V - - 110V 10V 30V 0V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 Electrical connector according to DIN EN 175301-803 (included) The solenoids are U listed and CS approved C Solenoid DC Inrush olding 9101 8W 15V 1V -4 www.norgren.com/fluid
Series 8680 Mounting bracket size NT 1/4, 3/8, 1/ 158986 3/4 158991 1 158996 Drawing legend B Index Description 101 Valve body 10 Valve cover *103 Diaphragm 104 llen head screw *105 ressure spring 400 Solenoid 701 Core tube *70 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip *707 O-ring 1400 Electrical connector 1400 105 103 104 10 101 400 701 706 705 704 707 703 70 * service kit consists of these individual parts. size NT B 1/4.36 1.73 3.09.64 3/8.36 1.73 3.09.64 1/.64 1.73 3.19.64 3/4 3.15 1.97 3.46.81 1 3.74.44 3.84 3.03 Service kits For valves with solenoid 9101 868000 157467 868100 157467 86800 157467 868300 157468 868400 157470 Further options on request -5
Series 85310 /-way valves Orifice 0.3 to.0 For neutral gases and liquids Indirectly solenoid actuated iston valves Internal thread 1/4" NT to " NT Operating pressure: 7.5 to 580 psi (0.5 to 40 bar) (see technical data) Description (standard valve) Solenoid valve for air, water, and other neutral fluids Switching function: normally closed Flow direction: determined Differential pressure: 7.5 psi (0.5 bar) required Fluid temperature: -4 F up to max. 194 F (-0 C up to max. +90 C) mbient temperature: -4 F up to max. 1 F (-0 C up to max. +50 C) Mounting position: as required, preferably with solenoid vertical on top Click-on Solenoid interchangeable without tools Material Body: Seat seal: Internal parts: Brass NBR Stainless steel, Brass, TFE For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - Compact piston valve - igh flow rate - Damped operation - Functional compact design - Solenoid in Click-on design - Stainless steel piston bushing a a b b Technical data size NT Orifice inch Cv-Value * NBR Normally open Manual override Operating pressure psi FM 110 C EDM 110 C Sealed core tube 00 01 0 03 14 99** 1/4 0.3.5 85310XX.9151.XXXXX 7.5-580 7.5-580 7.5-580 7.5-580 7.5-580 7.5-116 3/8 0.4 3.9 85311XX.9151.XXXXX 7.5-580 7.5-580 7.5-580 7.5-580 7.5-580 7.5-116 1/ 0.5 5.1 8531XX.9151.XXXXX 7.5-580 7.5-580 7.5-580 7.5-580 7.5-580 7.5-116 3/4 0.8 8.1 85313XX.9151.XXXXX 7.5-580 7.5-580 7.5-580 7.5-580 7.5-580 7.5-116 1 1.0 1.1 85314XX.9151.XXXXX 7.5-580 7.5-580 7.5-580 7.5-580 7.5-580 7.5-116 1 1/4 1.3 8.8 85315XX.9151.XXXXX 7.5-580 7.5-435 7.5-580 7.5-580 7.5-580 7.5-116 1 1/ 1.6 31.1 85316XX.9151.XXXXX 7.5-580 7.5-435 7.5-580 7.5-580 7.5-580 7.5-116.0 49.5 85317XX.9151.XXXXX 7.5-580 7.5-435 7.5-580 7.5-580 7.5-580 7.5-116 ** For orders please state voltage and frequency, e.g.: 8531000.9151.3050 for 30V 50z or 8531000.9151.0400 for 4V DC ** With solenoid DC 915 / C 9156 Solenoid 9151 (standard voltages) DC C 50z 60z 4V 4V - - 110V 10V 30V 0V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 ower consumption C Solenoid DC Inrush olding 9151 18W 45V 35V Electrical connector according to DIN EN 175301-803 (included) The solenoids are U listed and CS approved C with rectifier plug only -6 www.norgren.com/fluid
Series 85310 Mounting bracket* Content: 1 stainless steel mounting bracket and screws size NT 1/4, 3/8, 1/ 158988 3/4 158993 1 158998 Ø 400 706 1 1/4, 1 1/ 159006 159008 * For image of valve with mounting bracket, see 8410 series (page 65) 1400 105 103 701 704 705 Drawing legend 707 70 Index Description 101 Valve body 10 Valve cover *103 Valve plate 104 llen head screw *105 ressure spring *106 Gasket *107 O-ring *108 ip seal 400 Solenoid 701 Core tube *70 O-ring *704 ressure spring *705 lunger 706 Spring clip 707 O-ring 1400 Electrical connector 104 108 106 101 R T 1 10 107 * service kit consists of these individual parts. size NT ø 1 T 1/4 1.73 4.13 3.68.36 1.08 0.47 3/8 1.73 4.13 3.68.36 1.08 0.47 1/ 1.73 4.3 3.68.64 1. 0.55 3/4 1.97 4.69 4.04 3.15 1.44 0.63 1.44 5.18 4.35 3.74 1.73 0.71 1 1/4 3.6 6.54 5.39 5.0.36 0.79 1 1/ 3.6 6.54 5.39 5.0.36 0.87 4.9 7.3 5.96 6.30.91 0.94 Service kits Further options on request For valves with solenoid 9151 8531000 157998 8531100 157998 853100 157998 8531300 15800 8531400 158006 8531500 158589 8531600 158589 8531700 15915-7
Sanitary utomation Flatsan /-way valves Description Solenoid Valve for potable water Switching function: normally closed Flow Direction: determined Fluid Temperature: +5 C up to +70 C mbient Temperature: +5 C up to +50 C Mounting position: as required Material Body in contact with media: Seals in contact with media: Other wetted materials: S EDM S, stainless steel Ø 8,8 Connector Rapp RR166053 18 3 4 1 5 39.1 1,1 R 1 1,7,5 View on 9,9 6,4 1 O'ring 6x1.5 1 O'ring 8.5x1.5 Ø 11,1 Ø 3,5 1 Compact build for easy integration. atching coils with 1W power consumption. 3 Wide range of voltages and connections. 4 igh flow rates and pressures up to 10 bar. 5 Water tested for 300,000 cycles R 9 Ø 6,5 1,5 80 ` 5 Orifice inch Cv Value Operating pressure G/min m3/h psi Function atching Voltage ower Consumption Electrical connection /-Way Solenoid Valve Cartridge 0.3 3.7 0.97 16-4C-10-5+1111+U 7.5-145 NC Yes 5 V DC 1.W ins Cartridge 0.3 3.7 0.97 16-4C-10-5+111+U 7.5-145 NC Yes 5 V DC 1.W R RR166053 Cartridge 0.3 3.7 0.97 16-4C-10-5+1111+BFW 7.5-145 NC Yes 9 V DC 1.W ins Cartridge 0.3 3.7 0.97 16-4C-10-5+111+BFW 7.5-145 NC Yes 9 V DC 1.W R RR166053-8 www.norgren.com/fluid
Sanitary utomation dditional Ranges Catridge valves FS Flatsan valves were designed with the requirements of the sanitary automation industry in mind. Easily achieving 300,000 cycles without service, the low power consumption and compact build allow easy integration into OEM products. Water pilots Quick to integrate into existing systems, FS water pilots were designed for minimal power and space usage. Customized interfaces are available. igh-flow diaphragm valves These valves are ideal where higher flows are required but space and power consumption are at a premium. wide range of connections and electrical options are available on request. Direct acting solenoid valves With integrated 15 mm compression fittings, these valves were designed for low water pressure, and function without a pressure differential. atching versions are available. WRS approved. -9
/-way valves Orifice 0.3 to 1.0 For neutral steam and liquids Indirectly solenoid actuated iston valves Internal thread 1/4" NT to 1" NT Operating pressure: 15 to 363 psi (1 to 5 bar) Description (standard valve) Solenoid valve for steam, hot water, and other neutral fluids Switching function: Flow direction: Differential pressure: Fluid temperature: mbient temperature: Mounting position: Material Body: Seat seal: Internal parts: normally closed determined 15 psi (1 bar) required 14 F up to max. 39 F (-10 C up to max. +00 C) 14 F up to max. 1 F (-10 C up to max. +50 C), with solenoid mounted vertical underneath, max. 140 F (+60 C) as required, preferably with solenoid vertical on top Brass TFE Stainless steel, FM, TFE Series 85330 Click-on Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - Compact piston valve - igh flow rate - Damped operation - Functional compact design - Solenoid in Click-on design - Stainless steel piston bushing a a b b Technical data Operating pressure psi size NT Orifice inch Cv-Value * TFE Normally open Manual override 00 01 0 1/4 0.3.5 85330XX.915.XXXXX 15-363 15-3 15-363 3/8 0.4 3.9 85331XX.915.XXXXX 15-363 15-3 15-363 1/ 0.5 5.1 8533XX.915.XXXXX 15-363 15-3 15-363 3/4 0.8 8.1 85333XX.915.XXXXX 15-363 15-3 15-363 1 1.0 1.1 85334XX.915.XXXXX 15-363 15-3 15-363 * For orders please state voltage and frequency, e.g.: 853300.915.3050 for 30V 50z or 853300.915.0400 for 4V DC Solenoid 915 (standard voltages) ower consumption DC C 50z 60z 4V 4V - - 110V 10V 30V 0V C Solenoid DC Inrush olding 915 10W 15V 10V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 Electrical connector according to DIN EN 175301-803 (included) The solenoids are U listed and CS approved -10 www.norgren.com/fluid
Series 85330 Mounting bracket* Content: 1 stainless steel mounting bracket and screws size NT 1/4, 3/8, 1/ 158988 Ø 3/4 158993 1 158998 * For image of valve with mounting bracket, see 8410 series (page 65) 400 706 701 Drawing legend 1400 105 704 705 Index Description 103 707 101 Valve body 10 Valve cover *103 Valve plate 104 llen head screw *105 ressure spring *106 Gasket *107 O-ring *108 ip seal 400 Solenoid 701 Core tube *70 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip 707 O-ring 1400 Electrical connector 104 108 106 101 R T 1 70 10 107 * service kit consists of these individual parts. size NT ø 1 T 1/4 1.73 4.13 3.68.36 1.08 0.47 3/8 1.73 4.13 3.68.36 1.08 0.47 1/ 1.73 4.3 3.68.64 1. 0.55 3/4 1.97 4.69 4.04 3.15 1.44 0.63 1.44 5.18 4.35 3.74 1.73 0.71 Service kits For valves with solenoid 915 8533000 161735 8533100 161735 853300 161735 8533300 161736 8533400 161737 Further options on request -11
Series 84080 /-way valves Orifice 0.5 to 0.8 For neutral gases and liquids Indirectly solenoid actuated Diaphragm valves Internal threads 1/" NT and 3/4" NT Operating pressure: 4.35 to 15 psi (0.3 to 10.5 bar) Description (standard valve) Solenoid valve for potable water and other neutral fluids Switching function: normally closed Flow direction: determined Fluid temperature: 41 F to max. 1 F (+5 C to max. +50 C) mbient temperature: 3 F to max. 1 F (0 C to max. +50 C) Mounting position: as required, preferably solenoid vertical on top Click-on Solenoid interchangeable without tools Material Body: olymer (O GF 30) Seat seal: EDM Internal parts: Stainless steel, VDF For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - igh flow rate - Damped operation - Functional compact design - Solenoid interchangeable without tools (Click-on ) - International approvals Technical data valves size NT Orifice inch Cv-Value** * Solenoid in DC or C pressure psi 1/ 0.5 3.5 840814.9101.XXXXX 14.35-15 3/4 0.8 5.8 8408314.9101.XXXXX 14.35-15 * For orders please state voltage and frequency, e.g.: 840714. 9101.3050 for 30V 50z or 840714.915.0400 for 4V DC ** With gases and liquids up to 1 inch /s (cst) a a b This valve is tested and certified as a component by NSF International against NSF/NSI Standard 4 for materials and structural integrity requirements only and against NSF/NSI Standard 61 for material requirements only. b Solenoid 9101 (standard voltages) DC C 50z 60z 4V 4V - - 110V 10V 05V 30V 0V ower consumption C Solenoid DC Inrush olding 9101 8W 15V 1V / 7W Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 Electrical connector according to DIN EN 175301-803 (included) The solenoids are U listed and CS approved -1 www.norgren.com/fluid
Series 84080 Drawing legend Index Description 101 Valve body 10 Valve cover *103 Diaphragm 104 ex head screw *105 ressure spring 400 Solenoid 701 Core tube *70 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip 707 O-ring 1400 Electrical connector (enclosed) 1400 105 103 104 10 101 400 701 706 705 704 707 703 70 * service kit consists of these individual parts. size NT B 1/.01 3.39.80.64 3/4.44 3.70.99.91 Further options (valves) XXXXX54.XXXX atching system (only in DC) XXXXX67.XXXX Normally open (NO) Further options on request Specific NSF listed voltages for this valve can be found on: www.nsf.org. -13
Water Treatment and urification Water treatment and purification Drinking water is one of the most valuable resources on Earth. Keenly aware of its limited supply, Norgren turned its attention to the water treatment and purification market years ago. Our range of products and solutions are suited for a range of demanding applications, ranging from sea water desalination through to water sample analysis. Diaphragm solenoid valves Buschjost s brass, stainless steel and plastic diaphragm valves are developed specifically for handling water and are ideal for controlling both the intake and treatment process flow. Direct acting solenoid valves Norgren s range of direct acting solenoid valves are ideal for applications with low operating pressure differential. Quick connectors such as integrated push-in or compression fittings allow easy installation into the fluid circuit. Media separated solenoid valves Well suited for chemical dosing applications or for handling low flows of high-grade deionised water, these valves are well established in the water purification industry. -14 www.norgren.com/fluid
Water Treatment and urification Valve islands and pneumatic pilots Where flows or impurities are higher and pneumatically operated valves are used, Norgren s compact valve islands and range of pneumatic pilots can save critical assembly time and increase performance of the system. ir preparation Norgren s established range of air preparation equipment includes filters, regulators, and lubricators as well as pneumatic tubing and fittings. Water Treatment and urification Buschjost s new Series 84080 designed for the demanding needs of the water purification market. Solenoid completely encased; I65 protection Solenoid interchangeable without tools (Click-on ) Stainless steel jacketed threads Reliable diaphragm guidance at high flow rates, damped closing water hammer free Optimised range offers excellent flow rates This valve is tested and certified as a component by NSF International against NSF/NSI Standard 4 for materials and structural integrity requirements only and against NSF/NSI Standard 61 for material requirements only. -15
Series 8740 /-way valves Orifice 0.3 to.0 For slightly aggressive gases and liquids Indirectly solenoid actuated Diaphragm valves Internal thread 1/4" NT to " NT Operating pressure: 1.45 to 3 psi (0.1 to 16 bar) (see technical data) Description (standard valve) Solenoid valve for slightly aggressive gases and liquids Switching function: normally closed Flow direction: determined Differential pressure: 1.45 psi (0.1 bar) required [4.35 psi ((0.3 bar) for EDM] Fluid temperature: 14 F up to max. 194 F (-10 C up to max. +90 C) mbient temperature: 14 F up to max. 1 F (-10 C up to max. +50 C) Mounting position: as required, preferably with solenoid vertical on top Material Body: Stainless steel 1.4408 Seat seal: NBR Internal parts: Stainless steel, VDF Click-on Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recommended. Features - igh flow rate - Damped operation - Functional compact design - Solenoid interchangeable without tools (Click-on ) Technical data size NT Orifice inch Operating pressure psi Cv-Value * NBR Normally open Manual override a a b FM 30 F (110 C) b EDM 30 F (110 C) 00 01 0 03 14 1/4 0.3. 8740XX.9101.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 3/8 0.4 3.5 8741XX.9101.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 1/ 0.5 4.4 874XX.9101.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 3/4 0.8 6.9 8743XX.9101.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 1 1.0 10.9 8744XX.9101.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 1 1/4 1.3 6.5 8745XX.9101.XXXXX 1.45-145 - 1.45-145 1.45-145 4.35-145 1 1/4 1.3 6.5 8745XX.9151.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 1 1/ 1.6 8.8 8746XX.9101.XXXXX 1.45-145 - 1.45-145 1.45-145 4.35-145 1 1/ 1.6 8.8 8746XX.9151.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3.0 47. 8747XX.9101.XXXXX 1.45-145 - 1.45-145 1.45-145 4.35-145.0 47. 8747XX.9151.XXXXX 1.45-3 1.45-3 1.45-3 1.45-3 4.35-3 * For orders please state voltage and frequency, e.g.: 87400.9101.3050 for 30V 50z or 87400.9101.0400 for 4V DC Solenoid 9101 / 9151 (standard voltages) ower consumption DC C 50z 60z 4V 4V - - 110V 10V 30V 0V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 6059: I65 Electrical connector according to DIN EN 175301-803 (included) The solenoids are U listed and CS approved Solenoid DC C Inrush olding 9101 8W 15V 1V 9151 18W 45V 35V -16 www.norgren.com/fluid
Series 8740 Mounting bracket* size NT 1/4, 3/8, 1/ 158986 3/4 158991 1 158996 1 1/4, 1 1/ 159005 159007 * For image of valve with mounting bracket, see 8410 series Drawing legend 1400 B 400 701 706 Index Description 105 705 101 Valve body 10 Valve cover *103 Diaphragm 104 llen head screw *105 ressure spring 400 Solenoid 701 Core tube *70 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip *707 O-ring 1400 Electrical connector (enclosed) * service kit consists of these individual parts. 103 104 10 101 704 707 703 70 With solenoid 9101 size NT Service kits For valves with solenoid 9101 874000, 874100, 87400 15674 874300 15675 874400 15676 874500, 874600 159344 874700 159367 For valves with solenoid 9151 B 874500, 874600 169065 874700 169066 1/4.36 1.73 3.09.64 3/8.36 1.73 3.09.64 1/.64 1.73 3.19.64 3/4 3.15 1.97 3.46.81 1 3.74.44 3.84 3.03 1 1/4 5.0 3.6 4.90 3.76 1 1/ 5.0 3.6 4.90 3.76 6.30 4.9 5.61 4.5 With solenoid 9151 size NT Further options (valves) - Explosion protected version - Flange connections - Sealed core tube - atching version in DC only - ow power consumption W (only 4VDC) - With NT thread Further options (solenoids) XXXXXXX.9136 B Solenoid in protection class x II GD EEx m II T4 T 130 C, with 3 m connection cable Further options on request 1 1/4 5.0 3.6 5.59 4.45 1 1/ 5.0 3.6 5.59 4.45 6.30 4.9 6.30 4.94-17
Fluid Control Solutions Turn it to good use: Click-on -18 www.norgren.com/fluid