BUSCHJOST SERIES
|
|
- Job Kelly
- 6 years ago
- Views:
Transcription
1 c Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recoended. BUSCJOST SERIES 2/2 - way valves DN 8... DN 50 For neutral gases and liquids Indirectly solenoid actuated Diaphragm valves igh flow rate Damped operation Functional compact design Solenoid interchangeable without tools (c) articularly suitable as a water valve according to DIN EN TECNIC DT Solenoid valve for air, water, oil and other neutral fluids Switching function: Normally closed Flow direction: Determined Internal thread: G1/4... G2 or 1/4 NT... 2 NT Operating pressure: 0, bar (see technical data) Differential pressure: 0,1 bar required (0,3 bar for EDM) Temperature: Fluid: 10 C... max. +90 C mbient: 10 C... max. +50 C Mounting position: s required, preferably with solenoid vertical on top MTERIS Body: Brass Seat seal: NBR Internal parts: Stainless steel, VDF Operating pressure bar Symbol DN kv-value m 3 /h MODES* NBR 00 Normally open 01 Manual override 02 FM +110 C 03 EDM +110 C 14 G1/4 8 1, XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G3/8 10 3, XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G1/2 12 3, XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G3/4 20 6, XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G1 25 9, XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G1 1/ , XX ,1-10 0,1-10 0,1-10 0,3-10 G1 1/ , XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G1 1/ , XX ,1-10 0,1-10 0,1-10 0,3-10 G1 1/ , XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 a a b b G , XX ,1-10 0,1-10 0,1-10 0,3-10 G , XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 * For orders please state voltage and frequency, e.g.: for 230V 50z or for 24V DC For further information
2 Solenoid 9101 / 9151 (standard voltages) DC C 50z 60z 24V 24V 110V 120V 230V 220V ower consumption Solenoid DC C Inrush olding W 15V 12V W 45V 35V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 60529: I65 Electrical connection Form according to DIN EN (included) The solenoids are U listed and CS approved Mounting bracket art number G1/4, 3/8, 1/ G3/ G G1 1/4, 1 1/ G B 400 DIMENSIONS Index Description 101 Valve body 102 Valve cover * 103 Diaphragm 104 llen head screw * 105 ressure spring 400 Solenoid 701 Core tube * 702 O-ring 703 Screw piece * 704 ressure spring * 705 lunger 706 Spring clip * 707 O-ring 1400 Electrical connector (enclosed) * service kit consists of these individual parts With solenoid 9101 With solenoid 9151 G1/ ,5 67,0 G3/ ,5 67,0 G1/ ,0 67,0 G3/ ,0 71,5 G ,5 77,0 G1 1/ ,5 95,5 G1 1/ ,5 95,5 G ,5 108,0 Service kits B For valves with solenoid 9101 art number , , , For valves with solenoid 9151 art number , G1 1/ G1 1/ G Further options on request - Explosion protected version - Flange connections - Sealed core tube - ulse model in DC only - ow power consumption 2W (only 24V DC) - With NT thread Further options (solenoids) XXXXXXX.9136 B Solenoid in protection class x II 2 GD EEx m II T4 T 130 C, with 3 m connection cable
3 c Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recoended. BUSCJOST SERIES 2/2 - way valves DN 8... DN 50 For neutral gases and liquids Indirectly solenoid actuated iston valves Compact piston valve igh flow rate Damped operation Functional compact design Solenoid in c design Stainless steel piston bushing TECNIC DT Solenoid valve for air, water, and other neutral fluids Switching function: Normally closed Flow direction: Determined Internal thread: G1/4... G2 or 1/4 NT... 2 NT Operating pressure: 0, bar (see technical data) Differential pressure: 0,5 bar required Temperature: Fluid: 20 C... max. +90 C mbient: 20 C... max. +50 C Mounting position: s required, preferably with solenoid vertical on top MTERIS Body: Brass Seat seal: NBR Internal parts: Stainless steel, Brass, TFE Symbol a a b b Operating pressure bar DN kv-value m 3 /h MODES* NBR 00 Normally open 01 Manual override 02 FM +110 C 03 EDM +110 C 14 Sealed core tube 99** G1/4 8 2, XX ,5-40 0,5-40 0,5-40 0,5-40 0,5-40 0,5-8 G3/8 10 3, XX ,5-40 0,5-40 0,5-40 0,5-40 0,5-40 0,5-8 G1/2 12 4, XX ,5-40 0,5-40 0,5-40 0,5-40 0,5-40 0,5-8 G3/4 20 7, XX ,5-40 0,5-40 0,5-40 0,5-40 0,5-40 0,5-8 G , XX ,5-40 0,5-40 0,5-40 0,5-40 0,5-40 0,5-8 G1 1/ , XX ,5-40 0,5-30 0,5-40 0,5-40 0,5-40 0,5-8 G1/ , XX ,5-40 0,5-30 0,5-40 0,5-40 0,5-40 0,5-8 G , XX ,5-40 0,5-30 0,5-40 0,5-40 0,5-40 0,5-8 * For orders please state voltage and frequency, e.g.: for 230V 50z or for 24V DC ** With solenoid DC 9152 / C 9156 Solenoid 9151 (standard voltages) DC C 50z 60z 24V 24V 110V 120V 230V 220V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 60529: I65 ower consumption Solenoid DC C Inrush olding W 45V 35V Electrical connection Form according to DIN EN (included) The solenoids are U listed and CS approved C with rectifier plug only Mounting bracket* Content: 1 stainless steel mounting bracket and 2 screws MODES G1/4, G3/8, G1/ G3/ G G1 1/4, G1 1/ G * For image of valve with mounting bracket, see series For further information
4 DIMENSIONS Ø Index Description 101 Valve body 102 Valve cover *103 Valve plate 104 llen head screw *105 ressure spring *106 Gasket *107 O-ring *108 ip seal 400 Solenoid 701 Core tube *702 O-ring *704 ressure spring *705 lunger 706 Spring clip 707 O-ring 1400 Electrical connector * service kit consists of these individual parts R T 1 Ø 1 1 T G1/ ,0 93, ,5 12,0 G3/ ,0 93, ,5 12,0 G1/ ,5 93, ,0 14,0 G3/ ,0 102, ,5 16,0 G ,5 110, ,0 18,0 G1 1/ ,0 137, ,0 20,0 G1 1/ ,0 137, ,0 22,0 G ,0 151, ,0 24,0 Service kits For valves with MODES solenoid
5 c Solenoid interchangeable without tools For contaminated fluids the use of a strainer upstream of the valve is recoended. BUSCJOST SERIES 2/2 - way valves DN 8... DN 50 For slightly aggressive gases and liquids Indirectly solenoid actuated Diaphragm valves igh flow rate Damped operation Functional compact design Solenoid interchangeable without tools (c) TECNIC DT Solenoid valve for slightly aggressive gases and liquids Switching function: Normally closed Flow direction: Determined Internal thread: G1/4... G2 or 1/4 NT... 2 NT Operating pressure: 0, bar (see technical data) Differential pressure: 0,1 bar required (0.3 bar for EDM) Temperature: Fluid: 10 C... max. +90 C mbient: 10 C... max. +50 C Mounting position: s required, preferably with solenoid vertical on top MTERIS Body: Stainless steel Seat seal: NBR Internal parts: Stainless steel, VDF Symbol a a b b DN kv-value m 3 /h MODES* Operating pressure bar NBR Normally open Manual override FM +110 C 03 EDM +110 C 14 G1/4 8 1, XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G3/8 10 3, XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G1/2 12 3, XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G3/4 20 6, XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G1 25 9, XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G1 1/ , XX , ,1-10 0,1-10 0,3-10 G1 1/ , XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G1 1/ , XX , ,1-10 0,1-10 0,3-10 G1 1/ , XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 G , XX , ,1-10 0,1-10 0,3-10 G , XX ,1-16 0,1-16 0,1-16 0,1-16 0,3-16 * For orders please state voltage and frequency, e.g.: for 230V 50z or for 24V DC Solenoid 9101 / 9151 (standard voltages) DC C 50z 60z 24V 24V 110V 120V 230V 220V Design according to DIN VDE Voltage range +/-10%, duty cycle 100%. rotection class according to EN 60529: I65. Electrical connection Form according to DIN EN (included). The solenoids are U listed and CS approved ower consumption Solenoid DC C Inrush olding W 15V 12V W 45V 35V For further information
6 Mounting bracket* Content: 1 stainless steel mounting bracket and 2 screws MODES G1/4, G3/8, G1/ G3/ G G1 1/4, G1 1/ G * For image of valve with mounting bracket, see series DIMENSIONS B Index Description 101 Valve body 102 Valve cover *103 Diaphragm 104 llen head screw *105 ressure spring 400 Solenoid 701 Core tube *702 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip *707 O-ring 1400 Electrical connector (enclosed) * service kit consists of these individual parts With solenoid 9101 B 1 G 1/ ,5 67,0 G3/ ,5 67,0 G1/ ,0 67,0 G3/ ,0 71,5 G ,5 77,0 G1 1/ ,5 95,5 G1 1/ ,5 95,5 G ,5 108,0 Service kits For valves with MODES solenoid , , , For valves with MODES solenoid , With solenoid 9151 G1 1/ G1 1/ G ,5 Further options (valves) Explosion protected version Flange connections Sealed core tube atching version in DC only ow power consumption 2W (only 24VDC) With NT thread Further options (solenoids) XXXXXXX.9136 B 1 Solenoid in protection class x II 2 GD EEx m II T4 T 130 C, with 3 m connection cable Further options on request 3-251
7 BUSCJOST SERIES 2/2 - way valves DN 8... DN 50 For neutral gases and liquids ressure actuated by external fluid Diaphragm valves Spindle seal with diaphragm Suitable for contaminated process fluids Optical position indicator is standard TECNIC DT Valve for neutral gases and liquids up to max /s (cst) Switching function: Normally closed Flow direction: s required Internal thread: G1/4... G2 Operating pressure: 0, bar Mounting position: s required rocess fluid characteristics / Valve material Range of process fluid Temperature: Fluid: max. +90 C mbient: max. +50 C Material body: Brass Seat seal: Fabric reinforced NBR diaphragm ilot fluid characteristics / ctuator material ilot fluid: ir, water, hydraulic oil Fluid temperature: max. +90 C Material body: Brass, O (cover) Seat seal: Fabric reinforced NBR diaphragm ilot connection: G1/8 Z Symbol a a b b DN kv-value m 3 /h MODES Operating pressure bar NBR Normally open FM +110 C 03 EDM +110 C 14 G1/4 8 1, XX ,9-6 0,9-6 0,9-6 0,9-6 G3/8 10 2, XX ,9-6 0,9-6 0,9-6 0,9-6 G1/2 12 2, XX ,9-6 0,9-6 0,9-6 0,9-6 ilot pressure 3-8 bar, minimum 4 bar under vacuum conditions For further information
8 DIMENSIONS B G 1/8 Z Index Description 101 Valve body 102 Valve cover 103 Control head housing 104 Control head housing cover *105 Diaphragm *106 ressure spring *107 ip seal *108 Oval head cap screw * service kit consists of these individual parts 109 B 1 G1/ G3/ G1/ Service kits For valves MODES Further options (valves) XXXXX50.XXXX XXXXX51.XXXX XXXXX52.XXXX For G3/8 and G1/2 only: valve body manufactured from stainless steel, internal parts in contact with fluid from stainless steel, Sandvik 1802 stainless steel Only for G3/8 and G1/2: seat seal: FM, FM-diaphragm (Number 102), body manufactured from stainless steel, internal parts with contact to fluids manufactured from stainless steel, Sandvik 1802 stainless steel, maximum fluid temperature +110 C Seat seal: FFM, separating diaphragm TFE-foil with FM-diaphragm, body manufactured from stainless steel, internal parts with contact to fluids manufactured from stainless steel and 4 stainless steel, maximum fluid temperature +110 C, 0 to 6 bar Further options on request ccessories 3/2-way pilot valve C / DC* * Specify voltage and frequency when ordering
9 BUSCJOST SERIES 2/2 - way valves DN 2... DN 10 For neutral gases and liquids up to /s ressure actuated by external fluid iston seat valves Small, compact 30 miniature actuator ctuator can be swiveled 360 Suitable for contaminated process fluids Suitable for vacuum up to max. 90% Reversed flow direction optional igh flow rate Valve operates without pressure differential Body with M5 fastening thread as standard TECNIC DT Switching function: Normally closed Flow direction: Determined Internal thread: G1/8... G1/2 Operating pressure: max. 25 bar (see technical data) Mounting position: s required rocess fluid characteristics / Valve material Temperature: Fluid: 10 C... max. +90 C mbient: 10 C... max. +60 C Material body: Brass Seat seal: TFE Internal parts: Stainless steel / Brass Spindle sealing: TFE / NBR self-adjusting ilot fluid characteristics / ctuator material ilot fluid: Neutral gases Fluid temperature: max. +60 C Material body: Brass Seat seal: NBR Internal parts: Stainless steel, Brass ilot connection: M5 ilot pressure: 4-10 bar Symbol DN kv-value m 3 /h MODES Operating pressure bar TFE* G1/8 2,0 0, G1/4 4,0 0, a b Z a b * ilot pressure 4-10 bar G3/8 6,0 0, G1/2 10,0 1, For further information
10 DIMENSIONS Index Description 200 ctuator 9900 Valve body G1/8 - G3/8 Z G1/2 Z B* G1/ G1/ G3/ G1/ * B = maximum width Further options on request Normally open Seat seal: FM Seat seal: EDM Double acting actuation Oxygen version igher operating pressure 3-255
11 BUSCJOST SERIES 2/2 - way valves DN DN 80 For neutral gases and liquids ressure actuated by external fluid Seat valves Easy conversion into "normally open" or "double-acting" without tools (actuator Ø 70 only) Optical position indicator is standard Damped closing (valve closes against flow direction) Suitable for contaminated process fluids Suitable for vacuum up to max. 90% (actuator Ø 70 only) Reversed flow direction optional igh flow rate Optional pressure actuation with liquid pilot fluids TECNIC DT Switching function: Normally closed Flow direction: Determined Internal thread: G1/2... G3 or 1/2 NT... 3 NT Operating pressure: See technical data Mounting position: s required rocess fluid characteristics / Valve material Temperature: Fluid: 10 C... max C mbient: 10 C... max. +60 C Material body: Dezincification resistant brass Seat seal: TFE Internal parts: Stainless steel, Brass Spindle sealing: TFE / NBR self-adjusting ilot fluid characteristics / ctuator material ilot fluid: Neutral gases Fluid temperature: max. +60 C Material body: olyamid 66 with 30% fibre glass Seat seal: NBR Internal parts: Stainless steel, Brass ilot connection: G1/4 or 1/4 NT, respectively ctuator Ø 70 Z Symbol a a b b Operating pressure bar** DN kv-value m 3 /h MODES TFE Normally open* osition indicator: on/off with micro NMUR adapter plate osition indicator to NMUR EN switches G1/2 15 4, XX G3/ , XX G , XX G1 1/ , XX G1 1/ , XX ,5 0-4,5 0-4,5 0-4,5 0-4,5 G , XX * ilot pressure 1-10 bar, pilot connection Z1 ** ilot pressure 3,5-10 bar, pilot connection Z2 For further information
12 ctuator Ø 120 DN kv-value m 3 /h MODES TFE Normally open* Operating pressure bar osition indicator: 2 switches, I 65 osition indicator to NMUR EN Z a a b b G1 1/ , XX G1 1/ , XX G , XX G2 1/ , XX G , XX * 8X = ilot pressure 5,0-7 bar 81= ilot pressure 1,0-7 bar DIMENSIONS Index Description 101 Valve body *102 Valve plate 103 Valve spindle assembly 104 llen head screw 105 Spring washer *106 Gasket 107 Screw piece *108 Spindle sealing *109 O-ring 110 Bottom of control head housing *111 Cup spring 112 Screw piece *113 ressure spring *114 iston seal 115 Signal pin *116 ressure spring *117 O-ring 118 End cap *119 O-ring 120 Control head housing cover *122 ressure spring * service kit consists of these individual parts 1/4 G ctuator Ø Z1 Z2 SW B B* 1 SW G1/ ,5 177,5 164,0 27 G3/ ,5 184,0 168,0 32 G ,5 194,5 174,0 41 G1 1/ ,5 209,5 184,5 50 G1 1/ ,5 208,5 186,0 55 G ,5 229,5 194,5 70 * B = maximum width 3-257
13 BUSCJOST SERIES 2/2 - way valves DN DN 80 Index Description ctuator Ø Connection 4 / Exhaust port (NC) 102 ctuator 103 Connection 2/ pilot pressure port (NC) 105 Nut 106 Gasket 107 Spindle 108 Valve plate 109 Seat seal 110 Nut 111 Valve body G 1/4 G 1/4 e G1 1/ G1 1/ G G2 1/ G Service kits for actuator Ø 70 For valves MODES Further options (valves) XXXXX08.XXXX XXXXX22.XXXX Double acting; 4/2 or 5/2-way pilot valve required igher operating pressure (actuator Ø 70 only) Further options on request Seal materials: NBR, FM, EDM Stroke limiter Silencer Electrical position indicator with electromagnetic induction sensors ccessories 3/2-way pilot valve / (page 3-270) x Note: Order service kit if these valves are to be used in Zone 1/2 or 21/22 hazardous areas. This kit includes an additional instruction plate, a declaration of conformity and a silencer. The maximum permissible fluid temperature is reduced to +85 C (for actuator Ø 70 only)
14 Norgren is at the forefront of helping medical device manufacturers Unrivalled products, resources and expertise Medical device manufacturers use Norgren miniature valves, pressure regulators, media isolation valves and proportional technology to enhance their products. In addition to products, manufacturers also use Norgren s knowledge and experience of the industry together with engineering skills to achieve competitive edge by:» Reducing the of instruments» Enhancing fluid control performance» Reducing the overall cost of ownership CRYIC MNIFOD INTEGRTED FUIDIC TFORM NTI BCK SIONING DEVICE >>NORGREN IFE SCIENCES critical medical applications Norgren cutting edge technology FS, KI, Buschjost, Kloehn Complete solutions are supplied fully tested to help OEM`s become more successful through reducing the number of components in a system, reducing internal volume, minimising the footprint and simplifying final customer assembly. Norgren s diverse pneumatic & fluidic solutions are highly regarded by leading medical device manufacturers worldwide.
15 BUSCJOST SERIES 2/2 - way valves DN DN 25 For neutral gases and liquids ressure actuated by external fluid Seat valves Optical position indicator is standard Damped closing (valve closes against flow direction) Suitable for contaminated process fluids Suitable for vacuum up to max. 90% Reversed flow direction optional igh flow rate Optional pressure actuation by liquid pilot fluids TECNIC DT Switching function: Normally closed Flow direction: Determined Internal thread: G1/2... G1 or 1/2 NT... 1 NT Operating pressure: See technical data Mounting position: s required rocess fluid characteristics / Valve material Temperature: Fluid: 10 C... max C mbient: 10 C... max. +60 C Material body: Dezincification resistant brass Seat seal: TFE Internal parts: Stainless steel, Brass Spindle sealing: TFE / FM self-adjusting ilot fluid characteristics / ctuator material ilot fluid: Neutral gases Fluid temperature: max. +60 C Material body: olyamid 66 with 30% fibre glass Seat seal: NBR Internal parts: Stainless steel, Brass ilot connection: G1/4 or 1/4 NT, respectively ctuator Ø 50 Z Symbol a a b b Operating pressure bar** DN kv-value m 3 /h MODES TFE Normally open* osition indicator: on/off with micro NMUR adapter plate osition indicator to NMUR EN switches G1/2 15 4, XX G3/ , XX G , XX * ilot pressure 3,5-10 bar, pilot connection Z2 ** ilot pressure 1-10 bar, pilot connection Z1 For further information
16 DIMENSIONS ctuator Ø 50 Index Description 101 Valve body *102 Valve plate 103 Valve spindle assembly 104 llen head screw 105 Spring washer *106 Gasket 107 Screw piece *108 Spindle sealing *109 O-ring 110 Bottom of control head housing *111 Cup spring 112 Screw piece *114 iston seal 115 Signal pin *116 ressure spring *117 O-ring 118 End cap *119 O-ring 120 Control head housing cover * service kit consists of these individual parts B 1 SW G1/ ,5 27 G3/ ,5 32 G , /4 G Z1 Z2 SW B Service kits For valves with MODES solenoid Further options (valves) XXXXX08.XXXX Double acting; 4/2 or 5/2-way pilot valve required Further options on request Seal materials: NBR, FM, EDM Stroke limiter Silencer Electrical position indicator with electromagnetic induction sensors ccessories 3/2-way pilot valve / (page 3-270) x Note: Order service kit if these valves are to be used in Zone 1/2 or 21/22 hazardous areas. This kit includes an additional instruction plate, a declaration of conformity and a dust filter. The maximum permissible fluid temperature is reduced to +85 C
17 BUSCJOST SERIES 2/2 - way valves DN 2... DN 10 For aggressive gases and liquids to /s (cst) ressure actuated by external fluid Seat valves Small, compact 30 miniature actuator ctuator can be swiveled 360 Suitable for contaminated process fluids Suitable for vacuum up to max. 90% Reversed flow direction optional igh flow rate Valve operates without pressure differential M5 mounting thread as standard rocess fluid characteristics / Valve material Temperature: Fluid: 10 C... max. +90 C mbient: 10 C... max. +60 C Material body: Stainless steel (1.4408) Seat seal: TFE Internal parts: Stainless steel Spindle sealing: TFE / NBR, self-adjusting TECNIC DT Switching function: Normally closed Flow direction: Determined Internal thread: G1/8... G1/2 Operating pressure: Maximum 25 bar (see technical data) Mounting position: s required ilot fluid characteristics / ctuator material ilot fluid: Neutral gases Fluid temperature: max. +60 C Material body: Stainless steel Seat seal: NBR Internal parts: Stainless steel, Brass ilot connection: M5 ilot pressure: 4-10 bar ctuator Ø 70 Z Symbol a a b b * ilot pressure 4-10 bar DN kv-value m 3 /h MODES G1/8 2,0 0, G1/4 4,0 0, G3/8 6,0 0, G1/2 10,0 1, Operating pressure bar TFE* For further information
18 DIMENSIONS Index Description 200 ctuator 9900 Valve body G1/8 - G3/8 Z G1/2 Z B* G1/ G1/ G3/ G1/ Further options on request Normally open Seat seal: FM Seat seal: EDM Double acting actuation Oxygen version igher operating pressure 3-263
19 BUSCJOST SERIES 2/2 - way valves DN DN 80 For aggressive gases and liquids ressure actuated by external fluid Seat valves Easy conversion into "normally open" or "double-acting" without tool (actuator Ø 70 only) Optical position indicator is standard Damped closing (valve closes against flow direction) Suitable for contaminated process fluids Suitable for vacuum up to max. 90% (actuator Ø 70 only) Reversed flow direction optional igh flow rate Optional pressure actuation by liquid pilot fluids TECNIC DT Switching function: Normally closed Flow direction: Determined Internal thread: G1/2... G3 or 1/2 NT... 3 NT Operating pressure: 0-20 bar (see technical data) Mounting position: s required rocess fluid characteristics / Valve material Temperature: Fluid: 10 C... max C mbient: 10 C... max. +60 C Material body: Stainless steel Seat seal: TFE Internal parts: Stainless steel Spindle sealing: TFE / FM, self-adjusting ilot fluid characteristics / ctuator material ilot fluid: Neutral gases Fluid temperature: max. +60 C Material body: olyamid 66 with 30% fibre glass Seat seal: NBR Internal parts: Stainless steel, Brass ctuator Ø 70 Z Symbol a a b b Operating pressure bar** DN kv-value MODES TFE Normally osition indicator: NMUR osition indicator to m 3 /h open* on/off with micro adapter plate NMUR EN switches G1/2 15 4, XX G3/ , XX G , XX G1 1/ , XX G1 1/ , XX ,5 0-4,5 0-4,5 0-4,5 0-4,5 G , XX * ilot pressure 1-10 bar, pilot connection Z1 ** ilot pressure 3,5-10 bar, pilot connection Z2 For further information
20 ctuator Ø 120 Symbol DN kv-value MODES TFE m 3 /h Normally open* Operating pressure bar osition indicator: 2 switches, I 65 osition indicator to NMUR EN Z a a b b * 8X = ilot pressure 5,0-7 bar 81= ilot pressure 1,0-7 bar G1 1/ , XX G1 1/ , XX G , XX G2 1/ , XX G , XX DIMENSIONS ctuator Ø 70 Index Description 101 Valve body *102 Valve plate 103 Valve spindle assembly 104 llen head screw 105 Spring washer *106 Gasket 107 Screw piece *108 Spindle sealing *109 O-ring 110 Bottom of control head housing *111 Cup spring 112 Screw piece *113 ressure spring *114 iston seal 115 Signal pin *116 ressure spring *117 O-ring 118 End cap *119 O-ring 120 Control head housing cover *122 ressure spring * service kit consists of these individual parts 1/4 G Z1 Z2 B B* 1 G1/ ,5 177,5 164,0 G3/ ,5 184,0 168,0 G ,5 194,5 174,0 G1 1/ ,5 209,5 184,5 G1 1/ ,5 208,5 186,0 G ,5 229,5 194,5 * B = maximum width 3-265
21 BUSCJOST SERIES 2/2 - way valves DN DN 80 Index Description ctuator Ø Valve body 102 ctuator 103 Valve spindle assembly 105 Nut 106 Gasket 108 Valve plate 109 Seat seal 110 Nut 111 Valve body G 1/4 G 1/4 e G1 1/ G1 1/ G G2 1/ G Service kits for actuator Ø 70 For valves MODES Further options (valves) XXXXX08.XXXX XXXXX22.XXXX Double acting; 4/2 or 5/2-way pilot valve required igher operating pressure (actuator Ø 70 only) Further options on request Seal materials: NBR, FM, EDM Stroke limiter Silencer Electrical position indicator with proximity switch DIN or ISO welded ends ccessories 3/2-way pilot valve / (page 3-270) x Note: Order service kit if these valves are to be used in Zone 1/2 or 21/22 hazardous areas. This kit includes an additional instruction plate, a declaration of conformity and a dust filter. The maximum permissible fluid temperature is reduced to +85 C
22 Creating Engineering dvantage for the Global Coercial Vehicle Industry 30 years of R&D and hands-on experience We have spent the last 30 years working with leading vehicle manufacturers and industry related companies developing a range of high performance products and cutting-edge bespoke solutions for coercial vehicles. The product range is extensive, and in many cases the results are exceptional. CSSIS SOUTIONS OWERTRIN SOUTIONS IGT VEICE SOUTIONS >>TECNOOGY EDERSIdrives market share Solutions include:» Fluidtronic / mechatronic valves to optimise engine performance/efficiency and gas recirculation rate» Diaphragm actuators that use closed loop control to achieve maximum accuracy of positioning and repeatability» Customised valves with proven technology that meet temperature, vibration and voltage tolerances (I69K rated) OSI-CIK FITTING - TO GURNTEE EK-FREE CONNECTION WIT N UDIBE ND TNGIBE CICK» Compact cartridges with high flow, compact design and resistant to high vibration (100g/1000z)» Robust proportional technology in a modular and wide range of standard and electrical versions» Fittings designed to guarantee a leak-free connection also available as a low insertion cartridge system (less than 600 N force needed to install)» Connectors, Manifolds and ccessories including fittings with compact DOT/SE push-in cartridges for air systems» Valve arrays and Sub Systems with modularised components and devices centralised in one location» Braking System Controls compliant with DOT regulations with a lower leakage, higher flow and faster response time Norgren exploits the potential of on-board pneumatic, hydraulic and electronic technologies for coercial vehicles. For more information visit norgren.com/gvt
23 BUSCJOST SERIES 2/2 - way valves DN DN 25 For aggressive gases and liquids ressure actuated by external fluid Seat valves Optical position indicator is standard Damped closing (valve closes against flow direction) Suitable for contaminated process fluids Suitable for vacuum up to max. 90% Reversed flow direction optional igh flow rate Optional pressure actuation by liquid pilot fluids TECNIC DT Switching function: Normally closed Flow direction: Determined Internal thread: G1/2... G1 or 1/2 NT... 1 NT Operating pressure: 0-16 bar (see technical data) Mounting position: s required rocess fluid characteristics / Valve material Temperature: Fluid: 10 C... max C mbient: 10 C... max. +60 C Material body: Stainless steel Seat seal: TFE Internal parts: Stainless steel Spindle sealing: TFE / FM, self-adjusting ilot fluid characteristics / ctuator material ilot fluid: Neutral gases Fluid temperature: max. +60 C Material body: olyamid 66 with 30% fibre glass Seat seal: NBR Internal parts: Stainless steel, Brass ctuator Ø 50 Z Symbol a a b b Operating pressure bar** DN kv-value m 3 /h MODES TFE Normally open* osition indicator: on/off with micro NMUR adapter plate osition indicator to NMUR EN switches G1/2 15 4, XX G3/ , XX G , XX * ilot pressure 1-10 bar, pilot connection Z1 ** ilot pressure 3,5-10 bar, pilot connection Z2 For further information
24 DIMENSIONS Index Description 101 Valve body *102 Valve plate 103 Valve spindle assembly 104 llen head screw 105 Spring washer *106 Gasket 107 Screw piece *108 Spindle sealing *109 O-ring 110 Bottom of control head housing *111 Cup spring 112 Screw piece *113 ressure spring *114 iston seal 115 Signal pin *116 ressure spring *117 O-ring 118 End cap *119 O-ring 120 Control head housing cover * service kit consists of these individual parts 1/4 G Z1 Z2 B 1 B* 1 G1/ ,5 G3/ ,5 G ,5 Service kits For valves MODES Further options (valves) XXXXX08.XXXX Double acting; 4/2 or 5/2-way pilot valve required Further options on request Seal materials: NBR, FM, EDM Stroke limiter Silencer ccessories 3/2-way pilot valve / (page 3-270) x Note: Order service kit if these valves are to be used in Zone 1/2 or 21/22 hazardous areas. This kit includes an additional instruction plate, a declaration of conformity and a dust filter. The maximum permissible fluid temperature is reduced to +85 C
25 c Solenoid interchangeable without tools BUSCJOST SERIES 3/2 - way valves DN 1,6 & DN 3,0 ilot valve for pressure actuated valves Indirectly solenoid actuated Seat valve Compact design Complete with connector and gasket Interchangeable solenoid system Silenced exhaust ow power consumption TECNIC DT Solenoid valve for filtered, lubricated or non-lubricated compressed air or neutral liquids Switching function: Normally closed Flow direction: Determined Connection female thread: G1/4; connection male thread G1/4 Operating pressure: bar Temperature: Fluid: 10 C... max. +60 C mbient: 10 C... max. +60 C Mounting position: s required, preferably with solenoid vertical on top MTERIS Body: Brass Seat seal: TU Internal parts: Stainless steel, S Symbol * DN Flow l/min Switching time** ms On Off MODES*** Operating pressure bar TU Normally open Manual override a a b R b G1/4 1,6 1,2 8,5 30, XX * = G1/4 internal = G1/4 external R = Silenced exhaust to atmosphere ** For 6 bar according to DIN VDI 3290 with solenoid for DC *** For orders please state voltage and frequency, e.g.: for 230V 50z or for 24V DC For further information
26 Solenoid 9101 (standard voltages) DC C 50z 60z 24V 24V 110V 120V 230V 220V ower consumption Solenoid DC C Inrush olding W 15V 12V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 60529: I65 Electrical connection Form according to DIN EN (included) The solenoids are U listed and CS approved DIMENSIONS With solenoid 9101 Index Description 101 Valve body 102 rotective cap *103 Valve plate 105 O-ring *106 O-ring 400 Solenoid 701 Core tube 702 O-ring 703 Screw piece *704 ressure spring *705 lunger 706 Spring clip 707 O-ring 1400 Electrical connector 9901 exagon nut 9902 Gasket * service kit consists of these individual parts 1 G1/ ,6 61,5 1 G1/ R R 9 ( 19) G1/ Service kits For valves MODES Further options (valves) XXXXX53.XXXX Connection female thread G1/8, connection male thread G1/8 Further options (solenoids) XXXXXXX.9136 Solenoid in protection class x II 2 GD EEx m II T4 T 130 C, with 3 m connection cable Further options on request 3-271
27 c Solenoid interchangeable without tools BUSCJOST SERIES 3/2 - way valves DN 1,6 & DN 3,0 ilot valve for pressure actuated valves Indirectly solenoid actuated Seat valve Compact design Complete with connector and gasket Interchangeable solenoid system Silenced exhaust ow power consumption TECNIC DT Solenoid valve for filtered, lubricated or non-lubricated compressed air or neutral liquids Switching function: Normally closed Flow direction: Determined Connection female thread: G1/4; connection male thread G1/4 Operating pressure: bar Temperature: Fluid: 10 C... max. +60 C mbient: 10 C... max. +60 C Mounting position: s required, preferably with solenoid vertical on top MTERIS Body: Brass Seat seal: TU Internal parts: Stainless steel, S Symbol * DN Flow l/min Switching time** ms On Off MODES*** Operating pressure bar TU Normally open Manual override a a b R b G1/4 3,0 3,3 15,0 81, XX * = G1/4 internal = G1/4 external R = Silenced exhaust to atmosphere ** For 6 bar according to DIN VDI 3290 with solenoid for DC *** For orders please state voltage and frequency, e.g.: for 230V 50z or for 24V DC For further information
28 Solenoid 9151 (standard voltages) DC C 50z 60z 24V 24V 110V 120V 230V 220V ower consumption Solenoid DC C Inrush olding W 45V 35V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 60529: I65 Electrical connection Form according to DIN EN (included) The solenoids are U listed and CS approved DIMENSIONS With solenoid 9151 Index Description 101 Valve body 102 rotective cap *103 Valve plate 104 Valve seat 400 Solenoid 701 Core tube 702 O-ring *704 ressure spring 706 Spring clip 707 O-ring 1400 Electrical connector 9901 exagon nut 9902 Gasket * service kit consists of these individual parts R R G1/ ,0 79,0 G1/ ( 19) G1/4 Service kits For valves MODES Further options (valves) XXXXX53.XXXX Connection female thread G1/8, connection male thread G1/8 Further options (solenoids) XXXXXXX.9191 Solenoid in protection class x II 2 GD EEx m II T4 T 140 C Further options on request 3-273
29 BUSCJOST SERIES 2/2 - way valves DN DN 65 For air neumatically actuated Diaphragm valves igh flow rate Functional compact design One-piece diaphragm for longer life TECNIC DT Control via separate pilot valve or control unit Switching function: Normally closed Flow direction: Determined Internal thread: G 3/4... G2 1/2 or 3/4 NT /2 NT Operating pressure: 0, bar Temperature: Fluid: 40 C... max. +85 C mbient: 20 C... max. +85 C Mounting position: s required ilot connection: G1/8 or 1/8 NT, respectively MTERIS Body: luminium Seat seal: TE Z Symbol a a b b DN kv-value m 3 /h MODES Operating pressure bar TE ECO/FM * G3/ XX ,4-8 0,4-8 G XX ,4-8 0,4-8 G1 1/ XX ,4-8 0,4-8 G XX ,4-8 G2 1/ XX ,4-8 * rocess gas temperature: 10 C C * mbient temperature: 10 C C * Backflushing gas temperature: 10 C C For further information
30 DIMENSIONS Index Description 101 Valve body 102 Valve cover *103 Diaphragm 104 llen head screw *105 Diaphragm 106 Valve cover *107 Silencer 108 Silencer housing 109 llen head screw * service kit consists of these individual parts G3/4 - G1 G1 1/2 - G2 1/2 Z 104 Z G3/4 61, G1 61, G1 1/ G G2 1/ Service kits For valves with MODES seal TE (only diaphragm) (only diaphragm) (both diaphragm + silencer) (both diaphragm + silencer) (both diaphragm + silencer) Further options (valves) XXXXX90.XXXX Single-level; up to 4,5 bar (DN 40 only) Further options on request 3-275
31 BUSCJOST SERIES 2/2 - way valves DN DN 65 For air Indirectly solenoid actuated Diaphragm valves igh flow rate ll internal components captive Functional compact design Solenoid interchangeable without tools Integrated silencer One-piece diaphragm for longer life TECNIC DT Switching function: Normally closed Flow direction: Determined Internal thread: G 3/4... G2 1/2 or 3/4 NT /2 NT Operating pressure: 0, bar Temperature: Fluid: 40 C... max. +85 C mbient: 20 C... max. +85 C Mounting position: s required, preferably with solenoid vertical on top MTERIS Body: luminium Seat seal: TE Internal parts: TU Symbol a a b b DN kv-value m 3 /h MODES* Operating pressure bar TE ECO/FM ** G3/ XX ,4-8 0,4-8 G XX ,4-8 0,4-8 G1 1/ XX ,4-8 0,4-8 G XX ,4-8 G2 1/ XX ,4-8 * For orders please state voltage and frequency, e.g.: for 230V 50z or for 24V DC ** rocess gas temperatur: 10 C C mbient temperature: 10 C C Backflushing gas temperature: 10 C C For further information
32 Solenoid 8171 (standard voltages) DC C 50z 60z 24V 24V 110V 120V 230V 220V ower consumption Solenoid DC C Inrush olding W V 16V Design according to DIN VDE 0580 Voltage range +/-10%, duty cycle 100% rotection class according to EN 60529: I65 Electrical connection Form according to DIN EN (included) The solenoids are U listed and CS approved DIMENSIONS Index Description 101 Valve body 102 Valve cover * 103 Diaphragm 104 llen head screw * 105 Diaphragm 106 Valve cover * 107 Silencer 108 Silencer housing 109 llen head screw ** 400 Solenoid ** 702 lunger ** 705 ressure spring ** 706 ressure spring ** 707 Silencer 1400 Electrical connector (included) * service kit consists of these individual parts ** ilot service kit including solenoid G3/4 - G1 1 R **400 **702 **400 **705 **702 **706 **705 **707 ** ** * R 101 * R R T T 1 1 G3/4 105, G1 105, G1 1/2 166, G2 190, G2 1/2 205, G1 1/2 - G2 1/2 **705 **706 **400 **702 ** Service kits* For valves with solenoid 8171 MODES and seal TE ilot service kit** XXXXX*** *** Specify voltage and frequency 1 R 108 * R T 106 * *103 1 Further options (valves) XXXXX90.XXXX Single-level; up to 4,5 bar (DN 40 only) Further options (solenoids) XXXXXXX.8176 Solenoid in protection class x II 3 GD T 135 C EEx n II T4 XXXXXXX.8186 Solenoid in protection class x II 2 GD EEx me II T4 T 140 C Further options on request 3-277
Contents. Series Material Connection Pressure Temperature Function Page. Microsol PPS, PA, Stainless steel Subbase 0-10 bar +30 C 2/2, 3/2 18
Contents Solenoid Valves with Differential ressure - Miniature Solenoid Valves Series Material ressure Temperature Function age Microsol S,, Stainless steel Subbase 0-10 bar +30 C /, 3/ 18 Solenoid Valves
More informationFluid Control Contents
Fluid Control Contents Solenoid Valves with Differential ressure Series Material ressure Temperature Function age 8410 Brass 1/4" NT - " NT 1.45 to 3 psi 194 F / - 8680 Brass 1/4" NT - 1" NT 1.45 to 145
More informationContents. Series Material Connection Pressure Temperature Function Page Aluminium G 3/4 - G 2 1/ bar +85 C 2/2 202
Contents Valves for Dust Filters Series Material Connection ressure Temperature Function age 82900 luminium G 3/4 - G 2 1/2 0.4-8 bar +85 C 2/2 202 82960 luminium G 3/4 - G 2 1/2 0.4-8 bar +85 C 2/2 204
More informationTo order, quote model number from table overleaf, e. g for a DN 25 valve.
2/2-way valves DN 8 to DN 5 For neutral gases and liquid fluids Solenoid actuated, with forced lifting Diaphragm valves Internal threads /4 to G 2 or 1/4 N to 2 N Operating pressure to / 16 bar Description
More information2/2-way valves DN 8 to DN 50
2/2-way valves DN 8 to DN 5 For neutral gases and liquid fluids Solenoid actuated, with forced lifting Diaphragm valves Internal threads to G 2 or 1/4 N to 2 N Operating pressure to / 16 bar Description
More informationFluid Control Contents
Fluid Control Contents Solenoid Valves without Differential ressure - Miniature Solenoid Valves Series Material Connection ressure Temperature Function age Chipsol Stainless steel Cartridge 0 to 6 psi
More information2/2 Pressure operated valves
Operation Series Page no. Function 2/2 3/2 Body material Stainless steel Brass Solenoids IP Protection class IP65 (with connector) Explosion proof class Zones 1, 21 II 2 GD EEx m IP67 II 2 G EEx me IP54
More informationAcoustic Signals Industrial Airhorns > AP Series Product overview
udible Signals INDUSTRIL IRHORNS SOUNDERS coustic Signals Industrial irhorns > Series roduct overview The Series of air horns are suitable for general purpose signalling where high output is required such
More information86740/ /2-way piston valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > Damped operation > > Valve piston with TFE guide-ring Technical
More information82610/ /2-way seat valves
> > ort size: DN 1,5... 5, 1/8... 3/8 (ISO G/NT) > > Suitable for vacuum > > High flow rate > > Functional compact design > > Solenoid interchangeable without tools (c) > > Valve operates without pressure
More information82170/ /2-way diaphgram valves
> > ort size: DN 8... 50, G1/4... 2 (ISO G/NT) > > For high contaminated fluids > > Solenoid hermetically sealed from fluid > > Compact valve for industrial applications > > Small dimension > > Vacuum
More information/2-way piston valves
> > ort size: DN 15... 100, Flange connection, ressure rating N 40 > > djustable: Damped operation () > > Valve operates without differential pressure (Zero delta ) > > Valve piston with TFE guide-ring
More information/2-way piston valves
> > ort size: DN 15... 100 Flange connection, ressure rating N 40 > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > djustable: Damped operation () > > Valve piston
More information2/2- or 3/2-way- Rocker Solenoid Valve
2/2- or /2-way- Rocker Solenoid Valve Direct acting Hermetic isolation of fluid 0 145 SI 1) DN 2 mm Type 6128 can be combined with... Sub-base, threaded port 22mm width per station Type 2507 Cable lug
More informationSpecial valves. Series. Solenoids. IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64. Aluminium. Operation. Page no. EEx me IP65.
Special valves Operation Series Page no. Function 2/2 Body material Brass Aluminium Solenoids IP Protection class Explosion proof class IP65 (with connector) Zones 1, 21 II 2 G II 2 GD EEx me IP64 EEx
More information2/2 way Coaxial valve CXRM compact, pilot operated Modular design
2/2 way Coaxial valve CXRM compact, pilot operated Modular design Model code (also example order) CXRM 2/2 F C 2 08 040 038 V Standard NC (closed when de-energised) With external 3/2-way pilot valve 4
More informationSolenoid valve. Technical data Orifice 1/4 4 Body materials Actuator material Seal material Media Viscosity. Control medium Port connections
/-way Diaphragm Valve with plastic body, pneumatically operated, 1/ 3 with true union 3 with fl ange pplications with aggressive media Flow optimised body with zero dead volume Self draining installation
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/-, 5/- 5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More information2/2-way Miniature Solenoid Valve
2/2-way Miniature Solenoid Valve Direct-acting can be combined with... 0... 21 bar DN 1.2... 2.4 mm M5, G1/8 and sub-base 21 mm coil spacing when mounted on manifold Type 2506 Cable plug to DIN EN 175301-803*
More informationType 2511/12. Type Type 2030 Cable plug. ASI cable plug. Dosing control. General technical data Orifice Type 6518
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics Type 658 standard standard High flow-rate capacity Reduced power consumption Single or manifold mounting Standard-, EEx m and EEx i versions
More information3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
/2-, 5/2-5/-way Solenoid Valves for process pneumatics Type 658 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 658/659 can be combined with... Stard-, EEx
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More information3/2-Way Valve DN 15 up to DN 50
/-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More information98025 NAMUR/INLINE 3/2 way poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 NMUR/INLINE / way poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators TÜV-approval based on type examination
More information2/2-way Angle-Seat Control Valve with stainless steel design for media up to +180ºC, DN 13-50
2/2-way ngle-seat Valve with stainless steel design for media up to +180ºC, DN 13-50 Excellent control characteristic and high fl ow rates High cycle life Clean design for optimal use in hygienic environment
More information97100 NAMUR. Technical data
9700 NAMUR /2-, /2- and / Directional control valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /4, /4 NPT NAMUR Interface For single and double operated actuators
More informationRight Angle Control Valve 7051
Right ngle Control Valve 7051 15 up to 50 PN 40 Pneumatically operated valve for control loops with neutral up to highly aggressive media Integrated positioner Compact design ll parts in contact with medium
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
More information3/2-Way Valve DN 15 up to DN 40
3/-Way Valve 78 DN up to DN Pneumatically operated 3/-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 78) ompact design Unaffected by lightly
More informationFlow direction: Fixed. G1/4, G1/2 NAMUR G1/ Aluminium xxxx***** G1/4, G1/2 NAMUR G1/ Stainless steel xxxx*****
HERION 9805 SERIES Indirect solenoid actuated poppet valves with NMUR interface / - Internal thread G/, / NPT or flanged Main application: single operated actuators TÜV-approval based on IE 6 508,DIN V
More information3/2-Way Valve DN 15 up to DN 50
/-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated
More information26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.
60, 60, 8007 For single- and double-acting drives /, / and / Directional Control Valves Modular NAMUR design Actuation: Electromagnetic Indirectly controlled spool valves Connections G /8, G /, / NPT Standard
More information3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
More information2/2-way Solenoid Valve with servo diaphragm
2/2-way Solenoid Valve with servo diaphragm Type 5282 can be combined with... Pivoted armature pilot drive with manual override Magnetic drive completely isolated from fluid by diaphragm Circuit function
More informationHERION SERIES Indirect solenoid actuated soft seal
HERION 9700 SERIES Indirect solenoid actuated soft seal spool valves with NAMUR interface /, 5/ - G/ For single and double acting actuators Crossover-free switching, switchover function guaranteed even
More informationTechnical Principles of Valves
Technical Principles of Valves Symbols and Circuit Functions Symbol to DIN-ISO 1219 The circuit function illustrations are defined to the DIN-ISO 1219 Standard. These can be used to show other switching
More informationTechnical Information
Technical Information Solenoid Valve Basics Switching Functions & Symbols.......................280 Number of Ways..................................281 Direct cting Solenoid Valves........................282
More informationCommon wiring modules can be connected by fieldbus, multi-pole or common earth/neutral modules.
/ and 4/ multi-way valves; servo assisted; DN 4; flow rate: l/min.; /8, legris ø 6 mm port connections Advantages / Benefits Optimised system solutions due to high level of modularity Compact design with
More informationHigh pressure valves. 80 to 350 bar
80 to 350 bar High switchable p Hermetically sealed poppet valves Excellent repeatability of switching times Function even with lager voltage tolerance Compact design DN to DN 40 Technical data Medium:
More informationSeries 810: 2 Way Angle Body Valves: 1/4 to 3 NPT
Series 810: 2 Way Angle Body Valves: 1/4 to 3 NPT FEATURES Compact design, high fl ow rates Visual position indicator standard For temperatures from 22 F to +430 F / -30 C to 221 C Working pressures up
More information2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
/ or 3/-way Solenoid Valve, with pivoted armature and isolating diaphragm Type 0330 can be combined with Lockable manual override as standard For liquid, gaseous and aggressive media Long service life,
More informationA robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79U and PremiAir.
VI F79N Namur Solenoid Valve robust, pilot operated solenoid valve for direct mounting to pneumatic actuators Figure 79E/79 and Premiir. Features ompact design with standardized market proven NMR mounting
More informationOur policy is one of continued research and development. We therefore reserve the right
For single and double operated actuators 3/2-, 5/2- and 5/3 Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4, /4 NPT NAMUR Interface Exhaust
More informationNAMUR FLANGE: With integrated exhaust air recirculation Ordering information
00 TÜV-approval based on IEC 6 08, DIN V 9 Approvals: DIN EN 6/9 DVGW, group Rm and EN 6 Valves for safety systems to SIL or AK 7 / Directional control valves Actuation: electromagnetic Directly controlled
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
More informationLimit Switch Type 3776
Limit Switch Type 3776 With inductive or electric contacts and solenoid valve for linear actuators or rotary actuators according to VDI/VD 384 General The Type 3776 Limit Switch issues an electrical signal
More informationServo-operated 2/2-way solenoid valves Type EV220A
Data sheet Servo-operated 2/2-way solenoid valves Type is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features and
More informationFor single and double operated actuators. Exhaust air recirculation (3/2 way function)
For single and double operated actuators /-, 5/- and 5/ Directional Control Valves Actuation: Electromagnetic Indirectly controlled soft seal spool valves Connection G /4 or /4 NPT NAMUR interface Exhaust
More information3/2-Way Motor Valve compact 7280
DN 15 up to DN 40 3/2Way Compact Motor Valve for distributing function, mixing function and modulating operation for neutral and aggressive media Compact design Self calibration Unaffected by lightly contaminated
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More information97105 Inline. Ordering information. Technical data. Accessories See page 5
75 Inline /-, 5/- and 5/ directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves G /, / NPT, G /, / NPT For single and double operated actuators Crossover-free switching,
More information3/3 servo directional control valve with mechanical position feedback
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical () 426-4 www.cmafh.com 3/3 servo directional control valve with mechanical position feedback Type 4WS2EM...XN...-114
More informationOur policy is one of continued research and development. We therefore reserve the right
970 Namur /-, /- and /-Directional control valves Electromagnetic indirectly controlled soft seal spool valves G /4, /4 NPT NAMUR-interface For single and double operated actuators Exhaust air recirculation
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More information16mm miniature rocker solenoid valve with isolating diaphragm for special applications
16mm miniature rocker solenoid valve with isolating diaphragm for special applications 2/2 and 3/2 way, and manifold mount Insensitive to contamination High pressure & back pressure rating of 145 PSI Low
More information3/2 - Way Valve with metal actuator 1/2 up to 1 1/2. Technical Information
3/2 - Way Valve 78 with metal actuator /2 up to /2 Pneumatically operated 3/2-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, data sheet Type 78) ompact design
More informationMulti Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide
Multi Way Valves for Pneumatics Servo Assisted, Extendable, 10mm Wide 3/2 and 5/2 Way Valves Optimum system solutions due to high level of modularity Maintenance free and little wear due to high level
More informationElectro-pneumatic control valves
Electropneumatic control valves Visit our website for further information www.crouzet.com 9 Electropneumatic miniature solenoid Miniature solenoid valves Terminals Wires Connector LED indicators Valve
More information2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65
2/2-way Angle-Seat Valve for media up to +180 C, threaded port connection, DN 13-65 Standard valve body Type 2000 can be combined with Short valve body High flow rate and long life cycle Very high cycle
More informationPROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
More information3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
More informationFlow. group *2) G1/4 1, , B G1/ , B /4 NPT , B N/en
/ poppet valves electromagnetic actuated, directly controlled G /4, G / or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to,33 0 - mbar For a.c. solenoid systems with integrated
More informationSolenoid valves VZWM-L
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationData sheet. Solenoid valves 2/2-way direct-operated Type EV210B. February 2002 DKACV.PD.200.A B1504
Data sheet Solenoid valves 2/2-way direct-operated Type EV210B February 2002 DKACV.PD.200.A5.02 520B1504 closed Type EV210B NC for neutral liquids and gases DN 1.5-25 B - G1 Features Technical data 1 )
More informationSolenoid valves VZWP, servo-controlled
Key features and overview Function The solenoid valve VZWP-L- is a servo-controlled 2/2-way valve with solenoid coil. The solenoid valve is closed when de-energised. When energised, the differential pressure
More informationFor double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring
For double-acting actuators 5/ Directional Control Valves Actuation: Electromagnetic Indirect solenoid operation soft seal spool valve Connections G 1/, 1/ NPT, G 1/, NAMUR Interface Crossover-free switching
More information3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
More informationAngle Seat Valve 7010
Angle Seat Valve 7 N 8 up to N 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. ompact design Unaffected by lightly contaminated
More information2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2
2/2-way Solenoid Valve with servo diaphragm, G 3/8 - G 2 Type 6281 can be combined with... User friendly - one solenoid for all orifices Waterhammer free and low noise NC or NO Manual override optional
More information2/2-way Solenoid Valve for liquids and gases
2/2-way Solenoid Valve for liquids and gases Type 6213EV can be combined with... Coupled spring diaphragm system opened without differential pressure Waterhammer free and low noise HP00 version with increased
More information3/2 - Way Motor Valve 7280
1/2 up to 1 1/2 3/2Way Compact Motor Valve for distributing function, mixing function and modulating operation for neutral and aggressive media Compact design Self calibration Unaffected by lightly contaminated
More information3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
More information3/2-way Rocker Solenoid Valve for pneumatic systems
3/-way Rocker Solenoid Valve for pneumatic systems EEx ia versions Direct-acting High cycling rate Reduced power consumption Type 6104 can be combined with... Sub-base connection Approvals: Type 654 Servo-assisted
More informationSolenoid Valve Type 3962
Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling
More informationAngle Seat Control Valve 7020
Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid
More information5 Port Solenoid Valve
Metal Seal ort Solenoid Valve Series VQ7-6/7-8 Rubber Seal ISO Standard Size /Size VQ7-8/Single unit.6 VQ7-8/Manifold. Conforms to ISO standard /I Interface conforms to ISO standard Size (VQ7-6) and Size
More informationSolenoid valves 2/2-way servo operated type EV220B 15 50
MAKING MODERN LIVING POSSIBLE Datasheet Solenoid valves 2/2-way servo operated type EV220B 15 50 EV220B 15 50 is a universal indirect servo-operated 2/2-way solenoid valve program. Valve body in brass,
More informationSolenoid valve Types EV220B 15 - EV220B 50
Solenoid valve Types EV220B 15 - EV220B 50 EV220B 15 EV220B 50 is a universal indirect servo-opera ted 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and stainless
More information3/2 Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface
3/ Directional Control Valves Direct solenoid operated poppet valves Internal thread G1/4, 1/4-18 NPT or flanged with NAMUR interface Suitable for instrumental air, neutral gaseous and liquid fluids and
More informationCYLINDERS AND VALVES SERIES KNORR. Moving more than air
CYLINDERS AND VALVES SERIES KNORR 3 Moving more than air Content 3-2 3-2 page 3.1 Cylinders 3.1.1 SDJ / SEJ Clamping cylinder 3 3.1.2 Accessories for clamping cylinders 5 3.1.3 DU_J Standard cylinder 6
More informationSolenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
More information485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
More information2/2 or 3/2 way direct acting rocker solenoid valve
2/2 or 3/2 way direct acting rocker solenoid valve With isolating diaphragm Ultra low dead volume Type 6126 can be combined with... High back-pressure tightness Normally closed, normally open or universal
More information97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT
97 Inline /, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT For single and double operated actuators Crossover-free switching, switch-over function guaranteed even with
More informationSolenoid valve Types EV220B 15 - EV220B 50
Data sheet Solenoid valve Types EV220B 15 - EV220B 50 EV220B 15 EV220B 50 is a universal indirect servo-opera ted 2/2-way solenoid valve program. Valve body in brass, dezincification resistant brass and
More informationIsys Micro Series. Valve Products. Operating information. Material specifications. Pilot configuration
atalog 000-3US The Valve System incorporates a space saving back to back valve mounting design, and achieves flow rates of 0.35 v per valve with valves having a combined width of mm. This plug-in valve
More informationflow switches J with pipe tees (inline) J Direct installation (insertion) J for hvac applications J with interchangeable paddles J For air flow
J with pipe tees (inline) J Direct installation (insertion) J for hvac applications J with interchangeable paddles J For air flow Including products with: UL 508 UL 353 CSA C22.2#14-10 flow switches J
More information26230, NAMUR 3/2 & 5/2 Indirect solenoid actuated spool valves
60, 8007 NAMUR / & / > > Port size: G/ and NAMUR interface > > Easily interchangeable solenoid system > > For single and double operated actuators > > Standard manual override with detent > > Maintenance-free
More informationFLOW SWITCHES. With pipe tees (inline) Direct installation (insertion) For OEM applications Flow monitors. Including products with:
JJ With pipe tees (inline) JJ Direct installation (insertion) JJ For OEM applications JJ Flow monitors Including products with: UL 508 UL 353 CSA C22.2#14-10 FLOW SWITCHES DS_Flow_switches 05/2014 7 Reliable
More informationSolenoid valves 2/2-way servo-operated Type EV220B 15-50
Solenoid valves /-way servo-operated Type EVB 5-5 Features EVB NC and NO For robust industrial application For water, steam, oil, compressed air and gases Flow range for water:. to 6 m³/h Differential
More information3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
More information3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve
3/2, 5/2, 5/2 bistable and 5/3 way pneumatic solenoid valve Type 6518 Type 6519 Type 6518/6519 can be combined with... Single or block mounting Suitable for outdoor and chemical atmospheres Suitable for
More informationMULTI-FLUID SOLENOID VALVES 1/8 AND 1/4
- MULTI-FLUID SOLENOID VALVES /8 AND / MULTI FLUID SOLENOID VALVES /8 For applications that require robust electrical valves with a small footprint frequently found in industrial applications, the Series
More information5 Port Solenoid Valve
ort Solenoid Valve 7-6/7-8 Series Metal Seal Rubber Seal ISO Standard Size /Size 7-8/Single unit. Conforms to ISO standard /I Interface conforms to ISO standard Size (7-6) and Size (7-8). Outstanding high
More informationAccessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves
Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning
More informationStraight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16
Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Pneumatically operated straight bodied seat valve for the use in chemical plants, process technology and industrial automation. Unaffected by
More information3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base
3/2-way Small Solenoid Valve, G 1/8 - G 1/4 and sub-base Sub-base Direct-acting, normally closed and normally open Brass and stainless steel body Electrical cable plug Form A With or without manual override
More information2/2 or 3/2-way Miniature Rocker Solenoid Valve
2/2 or 3/2-way Miniature Rocker Solenoid Valve Type 0127 can be combined with... For maximum chemical resistance requirements Compact design with mm width and Cv ratings up to 0.08 Proven reliability since
More information