> > 32... 00 mm > > Cylinder and mounting conform to ISO 5552 > > Smooth and spherical Corrosion resitant design conforms to N 672-2, accepted in the food industry > > Special PU seals provide high performance and long life > > djustable integrated end position sensing option > > lternative air ports as standard > > Wide range of cylinder variants Technical features Medium: Compressed air, filtered, lubricated or non-lubricated : Based on ISO 5552 (length, mounting pitch and thread dimensions according to ISO 5552. Some outside dimension different form ISO 5552) Operation: Double acting, magnetic or non magnetic piston, adjustable cushioning Operating pressure:... 0 bar (4... 45 psi) Port size: G/8, G/4, G3/8 Cylinder diameters: 32, 40, 50, 63, 80, 00 mm strokes: See below Non-standard strokes: vailable (0... 2000 mm) Operating temperature: -20... +80 C max. (-4... +76 F) ir supply must be dry enough to avoid ice formation at temperatures below +2 C. (+35 F) Switching voltage: 0... 30 V d.c. Protection class: IP67 Materials: Profile barrel: anodised aluminium, nd covers: pressure diecast anodised aluminium Piston rod: stainless steel, see page 2 Piston rod seals: PU Piston seals: PU O-rings: NB Technical data Cylinder (mm) 32 40 50 63 80 00 Port size G/8 G/8 G/8 G/4 G/4 G3/8 Piston rod (mm) 2 6 20 20 25 25 Piston rod thread M0 x,25 M2 x,25 M6 x,5 M6 x,5 M20 x,5 M20 x,5 Cushion length (mm) 9 22 24 24 27 34 Theoretical thrusts at 6 bar outstroke (N) 482 754 78 870 306 470 Theoretical thrusts at 6 bar instroke (N) 44 633 990 680 2722 446 ir consumption at 6 bar outstroke (l/cm) 0,056 0,088 0,37 0,28 0,35 0,55 ir consumption at 6 bar instroke (l/cm) 0,05 0,076 0,7 0,98 0,324 0,54 strokes Cylinder (mm) Stroke length (mm) 25 50 80 00 25 60 200 250 320 400 500 32 40 50 63 80 00 25 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH en.5.240.0
Cylinder variants - non-magnetic piston Symbol S C D V Model Non-magnetic piston Description P../842000 cylinder 7 P../842000/W Cylinder wi h special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand,hoar-frost or ice) P../842000/IU Cylinder wi h extended piston rod 7 P../842000/W5 Cylinder wi h extended piston rod and special wiper/seal (suitable for applications wi h cement, plaster (stucco), arizona sand, hoar-frost or ice) P../842000/G Cylinder wi h piston rod bellows 9 Dimensions Page P../842000/J Cylinder wi h double ended piston rod 9 P../842000/W3 Cylinder wi h double ended piston rod and special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand, hoar-frost or ice) P../842000/L2 Cylinder wi h locking unit (passive) spring force on removal of the signal to the unit. Operating pressure for locking unit: 4... 0 bar 0 Cylinder variants - magnetic piston Symbol Model Description Dimensions S C D V magnetic piston Page P../842000/MI cylinder 8 P../842000/W2 Cylinder wi h special wiper/seal (suitable for applications with cement, plaster (stucco), arizona sand,hoar-frost or ice) P../842000/MU Cylinder wi h extended piston rod 8 P../842000/W6 Cylinder wi h extended piston rod and special wiper/seal (suitable for applications wi h cement, plaster (stucco), arizona sand, hoar-frost or ice) P../842000/MG Cylinder wi h piston rod bellows 9 P../842000/L4 Cylinder wi h locking unit (passive) spring force on removal of the signal to the unit. Operating pressure for locking unit: 4... 0 bar 0 For the cylinder models style, S, C, D, V and see options selector en.5.240.02 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH
Option selector Piston rod material Substitute (martensitic); wiper seal (austenitic); wiper seal S Hard chromium plated; C wiper seal (austenitic); D hard chromium plated; wiper seal (austenitic); V Smooth wiper seal (austenitic); hard chromium plated; Smooth wiper seal Cylinder (mm) Substitute 032, 040, 050, 063, 080, 00 Note: If option is not required, disregard option position within part number, eg. P/842032/00. For combinations of cylinder variants consult our Technical Service. This options selector explains only the cylinder variants. dditional variants/options can not be derived from. P /842 / / Strokes (mm) 2000 max. Switch variants Substitute Wi hout None djustable eed switch position 3 djustable solid state switch position 4 Variants (magnetic piston) Substitute MI Special wiper seal W2 Piston rod bellow MG xtended piston rod MU Special wiper seal, extended piston rod W6 P**/842***/MU/****/*** /W6/ xtension (mm) Piston rod locking unit L4 Variants (non-magnetic piston) Substitute None Double ended piston rod J Special wiper seal W Double ended piston rod, W3 special wiper seal Piston rod bellow G xtended piston rod IU Special wiper seal, extended piston rod W5 P**/842***/IU/****/*** /W5/ xtension (mm) Piston rod locking unit L2 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH en.5.240.03
Mountings and service kit 2 3 4 5 6 7 8 2 2 9 8 7 25 0 5 6 Position Style Corrosion protected B, G Clear anodised aluminium Clear anodised aluminium. Screws: 2 X 5 Cr Ni 8 0 (.430; ISI 304). Screws: 2 2 C Galvanized steel (ø 32... 63 mm) X 5 Cr Ni 8 0 (.430; ISI 304). Screws: 2 Painted steel (ø 80 & 00 mm) 3 Diecast aluminium Black corrosion protected diecast aluminium. Certified - for the food industry. Screws: 2 4 U Galvanized aluminium Inner ring: steel Outer ring: brass Black corrosion protected diecast aluminium Certified for he food industry Inner ring: stainless Steel (austenitic) Outer ring: nickel plated hardened steel - 5 D Diecast aluminium Bolt: galvanized steel (martensitic) Circlip: galvanized steel Black corrosion protected diecast aluminium Certified for he food industry Bolt: X 0 Cr Ni S 8 9 (.4305, ISI 303) Circlip: (martensitic). Screws: 2 X 5 Cr Ni 8 0 (.430; ISI 304). Screws: 2 Bolt: X 0 Cr Ni S 8 9 (.4305; ISI 303) 6 SW Diecast aluminium Black corrosion protected diecast aluminium X 6 Cr Ni 8 9 (.4308; ISI 304) Certified for he food industry 7 US Galvanized aluminium. Inner ring: steel Outer ring: brass 8 D2 Painted cast iron. Bolt: stainless steel (martensitic) Circlip: galvanized steel 9 FH Cast iron 0 Galvanized steel Screw X 0 Cr Ni S 8 9 (.4305, ISI 303) 2 S Clear anodised aluminium Bearing: brass 5 F Galvanized steel Bolt: galvanized steel Circlip: Galvanized steel Nickel plated steel Circlip: X 0 Cr Ni S 8 9 (.4305, ISI 303) Bolt: X 0 Cr Ni S 8 9 (.4305, ISI 303) 6 SS Painted cast iron 7 UF Galvanized steel. Inner ring: steel Outer ring: brass Nickel plated steel. Inner ring: stainless steel (austenitic) Outer ring: nickel plated hardened steel. 8 K Galvanized steel X 0 Cr Ni S 8 9 (.4305; ISI 303) Bolt: X 0 Cr Ni S 8 9 (.4305; ISI 303) yebolt: X 0 Cr Ni S 8 9 (.4305; ISI 303) X 0 Cr Ni S 8 9 (.4305; ISI 303), Inner ring X 05 Cr Co Mo 8-2 (.4528), Outer ring X 5 Cr Ni 8 0 (.430; ISI 304) en.5.240.04 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH
Mountings Model K B, G C D D2 F FH Cyl. 0 Page 8 Page Page 2 Page 5 Page 2 8 Page 2 5 Page 2 9 Page 2 3 Page 3 32 QM/8032/35 QM/8025/38 Q/8032/22 Q/8032/2 Q/8032/23 Q/8032/42 QM/8025/25 Q/8032/34 Q/8032/27 40 QM/8032/35 QM/8040/38 Q/8040/22 Q/8040/2 Q/8040/23 Q/8040/42 QM/8040/25 Q/8040/34 Q/8040/27 50 QM/8050/35 QM/8050/38 Q/8050/22 Q/8050/2 Q/8050/23 Q/8050/42 QM/8050/25 Q/8050/34 Q/8050/27 63 QM/8050/35 QM/8050/38 Q/8063/22 Q/8063/2 Q/8063/23 Q/8063/42 QM/8050/25 Q/8063/34 Q/8063/27 80 QM/8080/35 QM/8080/38 Q/8080/22 Q/8080/2 Q/8080/23 Q/8080/42 QM/8080/25 Q/8080/34 Q/8080/27 00 QM/8080/35 QM/8080/38 Q/800/22 Q/800/2 Q/800/23 Q/800/42 QM/8080/25 Q/800/34 Q/800/27 Corrosion protected 32 PVQ/8032/22 PVQ/8032/23 PVQM/8025/25 PVQ/8032/27 40 PVQ/8040/22 PVQ/8040/23 PVQM/8040/25 PVQ/8040/27 50 PVQ/8050/22 PVQ/8050/23 PVQM/8050/25 PVQ/8050/27 63 PVQ/8063/22 PVQ/8063/23 PVQM/8050/25 PVQ/8063/27 80 PVQ/8080/22 PVQ/8080/23 PVQM/8080/25 PVQ/8080/27 00 PVQ/800/22 PVQ/800/23 PVQM/8080/25 PVQ/800/27 32 KQ/8032/22 KQ/8032/2 KQ/8032/23 KQM/55433/25 40 KQ/8040/22 KQ/8040/2 KQ/8040/23 KQM/5544/25 50 KQ/8050/22 KQ/8050/2 KQ/8050/23 KQM/5545/25 63 KQ/8063/22 KQ/8063/2 KQ/8063/23 KQM/5545/25 80 KQ/8080/22 KQ/8080/2 KQ/8080/23 KQ/8080/25 00 KQ/800/22 KQ/800/2 KQ/800/23 KQ/8080/25 S SS SW UF U US Cover screws Magnetically operated switches Cyl. 2 Page 3 6 Page 4 6 Page 3 7 Page 3 4 Page 4 7 Page 4 Page 4 32 Q/8032/4 M/P993 M/P9493 QM/8025/32 Q/8032/33 M/P4030 40 Q/8040/4 M/P9932 M/P9494 QM/8040/32 Q/8040/33 M/P403 50 Q/8040/4 M/P9933 M/P9495 QM/8050/32 Q/8050/33 M/P4032 63 Q/8063/4 M/P9934 M/P9496 QM/8050/32 Q/8063/33 M/P4033 80 Q/8063/4 M/P9935 M/P9497 QM/8080/32 Q/8080/33 M/P4034 00 Q/800/4 M/P9936 M/P9498 QM/8080/32 Q/800/33 M/P4035 Corrosion protected 32 M/P40459 PVQM/8025/32 PVQ/8032/33 40 M/P40460 PVQM/8040/32 PVQ/8040/33 50 M/P4046 PVQM/8050/32 PVQ/8050/33 63 M/P40462 PVQM/8050/32 PVQ/8063/33 80 M/P40463 PVQM/8080/32 PVQ/8080/33 00 M/P40464 PVQM/8080/32 PVQ/800/33 32 M/P72288 KQM/8032/32 PVQ/882032/88 40 M/P72289 KQM/8040/32 PVQ/882032/88 50 M/P72290 KQM/8050/32 PVQ/882050/88 63 M/P7229 KQM/8050/32 PVQ/882050/88 80 M/P72292 KQM/8080/32 PVQ/882080/88 00 M/P72293 KQM/8080/32 PVQ/882080/88 25 Page 5 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH en.5.240.05
M2 cables Cable length Plug with moulded cable IP 67 Wiring diagram for M2 male connector Pin Features Colour Service kit Service Kit 2 3 4 0... 30 V d.c. Brown 2 Signal (outstroke) White 3 Not used Blue 4 Signal (instroke) Black (m) 2 Cyl. 2 M/P73525/2 5 M/P73525/5 0 M/P73525/0 32 PQ/842032/00 40 PQ/842040/00 50 PQ/842050/00 63 PQ/842063/00 80 PQ/842080/00 00 PQ/84200/00 en.5.240.06 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH
Dimensions; non-magnetic piston L2 G5 ø 32... 63 Dimensions in mm Projection/First angle KW ø B e MM h 9 4 5 2 KK T ø B e T KV SW BG G BH 4 8 ø 80 & 00 PL2 5 2 PL M VD L2 WH G PL 9 PL V G L8 + # - - ø 32... 63 ø 80 & 00 7 BH T T T L9 BG BG # Stroke Cushion adjustment front end cover 7 ir supply, cylinder instroke 8 ir supply, cylinder outstroke 9 lternative air supply, cylinder instroke 4 Cushion adjustment rear end cover Cyl M B e B e BG BH 2 4 5 G G G3 KK KW L2 L8 L9 32 22 30 30 6 6 53 3 32 34 G/8 4 47 20,5 M0x,25 5 20 94 4 40 24 35 35 6 6 60 34,5 34 36 G/8 4 53 22,5 M2x,25 6 2 05 4 50 32 40 40 6 8 7,5 40 39 42,5 G/8 4 55,5 24,5 M6x,5 8 28 06 5 63 32 45 45 6 8 82 46 45,5 49 G/4 9 58 29,5 M6x,5 8 28 2 5 80 40 45 45 7 6 99 54 57 60,5 G/4 9 63 3 M20x,5 0 35 28-00 40 55 55 7 6 9 65 65 68,5 G3/8 24,5 67 36,5 M20x,5 0 38 38 - Cyl L2 MM PL PL PL2 T V VD WH KV SW at 0 per 25 mm Model h9 mm 32 4,5 2 7 0,5 4 32,5 M 6 3 6 26 7 0 0,56 kg 0,07 kg P/842032/* 40 6,5 6 7 0,5 4 38 M 6 3,5 6 30 9 3 0,93 kg 0, kg P/842040/* 50 6,5 20 7 2,5 4 46,5 M 8 3,5 6 37 24 7 3,48 kg 0,8 kg P/842050/* 63 6,5 20 9,5 4,5 6 56,5 M 8 4 6 37 24 7 3 2,32 kg 0,9 kg P/842063/* 80 7,5 25 9,5 4 6 72 M 0 4 6 46 30 22 7 4,02 kg 0,29 kg P/842080/* 00 0 25 2 6,5 8,5 89 M 0 4 6 5 30 22 7 6,24 kg 0,35 kg P/84200/* * Please insert standard stroke length without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH en.5.240.07
Dimensions; magnetic piston 24,3 G4 ø 32... 63 35 M2x Dimensions in mm Projection/First angle ø B e MM h 9 KK L2 KW G5 T ø B e 4 5 T 2,5 2 KV SW BG G BH 2 4 8 X PL ø 80 & 00 9 L8 + # 7 - - ø 32... 63 ø 80 & 00 T T PL2 M VD L2 WH G PL G PL V 5 T 2 BH L9 BG BG # Stroke Cushion adjustment front end cover 2 Magnetically operated switches (F ) 7 ir supply, cylinder instroke 8 ir supply, cylinder outstroke 9 lternative air supply, cylinder instroke 4 Cushion adjustment rear end cover Cyl M Be Be BG BH 2 4 5 G G G4 G5 KK KW L2 L8 L9 32 22 30 30 6 6 53 3 32 34 G/8 4 47 34 20,5 M0x,25 5 20 94 4 40 24 35 35 6 6 60 34,5 34 36 G/8 4 53 40 22,5 M2x,25 6 2 05 4 50 32 40 40 6 8 7,5 40 39 42,5 G/8 4 55,5 42,5 24,5 M6x,5 8 28 06 5 63 32 45 45 6 8 82 46 45,5 49 G/4 9 58 45,5 29,5 M6x,5 8 28 2 5 80 40 45 45 7 6 99 54 57 60,5 G/4 9 63 50 3 M20x,5 0 35 28-00 40 55 55 7 6 9 65 65 68,5 G3/8 24,5 67 54,5 36,5 M20x,5 0 38 38 - Cyl L2 MMh9 PL PL PL2 T V VD WH X KV SW at 0 mm per 25 mm Model 32 4,5 2 7 0,5 4 32,5 M 6 3 6 26 0 7 0 0,56 kg 0,07 kg P/842032/MI+/* 40 6,5 6 7 0,5 4 38 M 6 3,5 6 30 0 9 3 0,93 kg 0, kg P/842040/MI+/* 50 6,5 20 7 2,5 4 46,5 M 8 3,5 6 37 0,5 24 7 3,48 kg 0,8 kg P/842050/MI+/* 63 6,5 20 9,5 4,5 6 56,5 M 8 4 6 37,5 24 7 3 2,32 kg 0,9 kg P/842063/MI+/* 80 7,5 25 9,5 4 6 72 M 0 4 6 46 0 30 22 7 4,02 kg 0,29 kg P/842080/MI+/* 00 0 25 2 6,5 8,5 89 M 0 4 6 5 0 30 22 7 6,24 kg 0,35 kg P/84200/MI+/* * Please insert standard stroke length + Magnetically switch variants en.5.240.08 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH
Cylinder variants P/842000/J Cylinder double ended piston rod; non-magnetic piston ø 32... 63 ø 80 & 00 L8 + # ZM + 2 x # Cyl. L8 ZM Model Non-magnetic piston 32 94 46 P/842032/J/* 40 05 65 P/842040/J/* 50 06 80 P/842050/J/* 63 2 95 P/842063/J/* 80 28 220 P/842080/J/* 00 38 240 P/84200/J/* * Please insert standard stroke length # Stroke Two threads can t be used for mountings P/842000/G Cylinder with piston rod bellow; non-magnetic piston B ø ø P/842000/MG Cylinder with piston rod bellow; magnetic piston B Cyl. Stroke max per bellow Piston rod extention B for first bellow for further bellows Model Non-magnetic piston Model Magnetic piston 32 40 60 30 25 P/842032/G/* P/842032/MG+/* 40 63 45 50 32 P/842040/G/* P/842040/MG+/* 50 63 45 40 32 P/842050/G/* P/842050/MG+/* 63 63 45 40 32 P/842063/G/* P/842063/MG+/* 80 80 250 50 45 P/842080/G/* P/842080/MG+/* 00 80 250 50 45 P/84200/G/* P/84200/MG+/* * Please insert standard stroke length + Magnetically switch variants without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH en.5.240.09
P/842000/L2 Cylinder with piston rod bellow - non-magnetic piston B L 8 + # J N ø B e T M VD D K WH F H G L P/842000/L4 Cylinder with piston rod bellow - magnetic piston B L 8 + # J N ø B e T M VD D K WH F H G L Cyl B D F G H J K L M N B e 32 32 2 8 40 4,2 48 25 M 5 6 59 8 30 48 50 40 35,5 2 0 46 4,5 55 24 M 5 2 6,5 0 35 56 58 50 49 6 5 54,5 70 30 M 6 24 75 2 40 68 70 63 49 5 5 55 7,5 70 38 M 8 32 86 2 45 82 85 80 62 6 6 70 0 90 53 M 8 44 9 6 45 00 05 00 65 8 6 70 0 92 48 M 8 60 9 6 55 20 30 Cyl L 8 T VD WH Locking force Model; non-magnetic piston Model; non-magnetic piston 32 M 5 94 32,5 M 6 0 6 600 N P/842032/L2/* P/842032/L4+/* 40 G /8 05 38 M 6 0 8 000 N P/842040/L2/* P/842040/L4+/* 50 G /8 06 46,5 M 8 2 22 500 N P/842050/L2/* P/842050/L4+/* 63 G /8 2 56,5 M 8 2 20 2200 N P/842063/L2/* P/842063/L4+/* 80 G /8 28 72 M 0 20 33 5000 N P/842080/L2/* P/842080/L4+/* 00 G /8 38 89 M 0 23 38 5000 N P/84200/L2/* P/84200/L4+/* * Please insert standard stroke length + Magnetically switch variants en.5.240.0 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH
Mountings Front or rear stud mounting Conforms to ISO 5552, type MX Piston rod swivel K Dimensions in mm Projection/First angle BB DD TG 3 2 4 4 TG KK KK BB DD TG kg Model () 32/40 7 M6 32,5/38 0,02 QM/8032/35 50/63 23 M8 46,5/56,5 0,05 QM/8050/35 80/00 28 M0 72/89 0,08 QM/8080/35 Front flange B, G Conforms to ISO 5552, type MF and MF2 4 B L 2 KK B F L L2 kg Model (K) 2 3 4 32 M0x,25 5 26 73 20 9 2 7 30 0,20 QM/8025/38 40 M2x,25 6 26 77 24 9 2 9 30 0,20 QM/8040/38 50/63 M6x,5 8 34 06 32 30 9 24 42 0,65 QM/8050/38 80/00 M20x,5 0 42 22 40 30 9 30 42 0,72 QM/8080/38 Foot mounting C Conforms to ISO 5552, type MS L F MF UF TF FB T H U O ø B T FB MF TF UF kg Model (B, G) 32 50 7 0 32 64 80 0,25 Q/8032/22 40 55 9 0 36 72 90 0,35 Q/8040/22 50 65 9 2 45 90 0 0,70 Q/8050/22 63 75 9 2 50 00 25 0,80 Q/8063/22 80 00 2 6 63 26 54,35 Q/8080/22 00 20 4 6 75 50 86 2,20 Q/800/22 Corrosion protected version 32 50 7 0 32 64 80 0,25 PVQ/8032/22 40 55 9 0 36 72 90 0,35 PVQ/8040/22 50 65 9 2 45 90 0 0,7 PVQ/8050/22 63 75 9 2 50 00 25 0,8 PVQ/8063/22 80 00 2 6 63 26 54,35 PVQ/8080/22 00 20 4 6 75 50 86 2,2 PVQ/800/22 32 50 7 0 32 64 80 0,26 KQ/8032/22 40 55 9 0 36 72 90 0,3 KQ/8040/22 50 65 9 2 45 90 0 0,56 KQ/8050/22 63 75 9 2 50 00 25 0,73 KQ/8063/22 80 00 2 6 63 26 54,73 KQ/8080/22 00 20 4 6 75 50 86 2,5 KQ/800/22 B H O T U T kg Model (C) 32 7 32 8 4 24 48 32 0,5 Q/8032/2 40 0 36 9 4 28 53 36 0,8 Q/8040/2 50 0 45 0 5 32 64 45 0,30 Q/8050/2 63 0 50 2 5 32 74 50 0,39 Q/8063/2 80 2 63 9 5 4 98 63 0,80 Q/8080/2 00 4 7 9 5 4 5 75 0,95 Q/800/2 32 7 32 4 24 48 32 0,6 KQ/8032/2 40 9 36 2 5 28 53 36 0,9 KQ/8040/2 50 9 45 3 5 32 64 45 0,32 KQ/8050/2 63 9 50 3 5 32 74 50 0,4 KQ/8063/2 80 2 63 9 6 4 98 63 0,83 KQ/8080/2 00 4 7 9 6 4 5 75 0,98 KQ/800/2 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH en.5.240.
ear clevis D Conforms to ISO 5552, type MP2 LH ear clevis D2 Conforms to ISO 5552, type B6 Dimensions in mm Projection/First angle UB FL B2 CB H 4 L B H 4 FL K e 8 B3 2 K h 9 M CB H4 K e8 FL L LH M UB kg Model (D) 32 26 0 22 3 52 9 45 0, Q/8032/23 40 28 2 25 6 60 2 52 0,6 Q/8040/23 50 32 2 27 7 68 2 60 0,22 Q/8050/23 63 40 6 32 22 79 5 70 0,34 Q/8063/23 80 50 6 36 22 99 5 90 0,54 Q/8080/23 00 60 20 4 27 9 20 0 0,90 Q/800/23 Corrosion protected version 32 26 0 22 3 52 9 45 0, PVQ/8032/23 40 28 2 25 6 60 2 52 0,6 PVQ/8040/23 50 32 2 27 7 68 2 60 0,22 PVQ/8050/23 63 40 6 32 22 79 5 70 0,34 PVQ/8063/23 80 50 6 36 22 99 5 90 0,54 PVQ/8080/23 00 60 20 4 27 9 20 0 0,9 PVQ/800/23 32 26 0 22 3 52 9 45 0, KQ/8032/23 40 28 2 25 6 60 2 52 0,6 KQ/8040/23 50 32 2 27 7 68 2 60 0,22 KQ/8050/23 63 40 6 32 22 79 5 70 0,34 KQ/8063/23 80 50 6 36 22 99 5 90 0,54 KQ/8080/23 00 60 20 4 27 9 20 0 0,9 KQ/800/23 B H4 B2 B3 K h9 FL 2 kg Model (D2) 32 4 34 3,3 0 22 7 0,20 Q/8032/42 40 6 40 4,3 2 25 2 20 0,23 Q/8040/42 50 2 45 4,3 6 27 4,5 22 0,36 Q/8050/42 63 2 5 4,3 6 32 8 25 0,55 Q/8063/42 80 25 65 4,3 20 36 22 30 0,90 Q/8080/42 00 25 75 4,3 20 4 22 32,45 Q/800/42 Piston rod clevis F Conforms to DIN ISO 840 C L K CL CM ø CK h Front or rear detachable trunnion FH Conforms to VDM 24562 part 2, type MT 5/6 L CL KK UW TD e 9 KK C CKh CL CM L K kg Model (F) 32 M0x,25 40 0 20 0 6 20 28 0,09 QM/8025/25 40 M2x,25 48 2 24 2 9 24 32 0,3 QM/8040/25 50/63 M6x,5 64 6 32 6 25 32 4,5 0,33 QM/8050/25 80/00 M20x,5 80 20 40 20 32 40 50 0,67 QM/8080/25 Corrosion protected version 32 M0x,25 40 0 20 0 6 20 28 0,09 PVQM/8032/25 40 M2x,25 48 2 24 2 9 24 32 0,3 PVQM/8040/25 50/63 M6x,5 64 6 32 6 25 32 4,5 0,33 PVQM/8050/25 80/00 M20x,5 80 20 40 20 32 40 50 0,67 PVQM/8080/25 32 M0x,25 40 0 20 0 6 20 28 0,09 KQM/55433/25 40 M2x,25 48 2 24 2 9 24 32 0,3 KQM/5544/25 50/63 M6x,5 64 6 32 6 25 32 4,5 0,33 KQM/5545/25 80/00 M20x,5 80 20 40 20 32 40 50 0,67 KQM/8080/25 D H TM h4 D h L TD e9 TL TM h4 UW kg Model (FH) 32 30 6 2 2 50 45 0,20 Q/8032/34 40 35 20,6 6 6 63 55 0,38 Q/8040/34 50 40 24,6 6 6 75 65 0,60 Q/8050/34 63 45 24,6 20 20 90 75,0 Q/8063/34 80 45 28,6 20 20 0 00,90 Q/8080/34 00 55 38 2 25 25 32 20 3,50 Q/800/34 TL en.5.240.2 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH
ear eye Conforms to ISO 5552, type MP4 Trunnion support S Conforms to ISO 5552, type T4 Dimensions in mm Projection/First angle FL ø D 3 W L CD H 9 T H 2 H H7 ø D F x 45 ø D 2 C B 2 M B CD H9 W FL L M kg Model () 32 0 25,8 22 3 9 0,09 Q/8032/27 40 2 27,8 25 6 2 0, Q/8040/27 50 2 3,7 27 7 2 0,7 Q/8050/27 63 6 39,7 32 22 5 0,24 Q/8063/27 80 6 49,7 36 22 5 0,37 Q/8080/27 00 20 59,7 4 27 20 0,59 Q/800/27 Corrosion protected version 32 0 25,8 22 3 9 0,09 PVQ/8032/27 40 2 27,8 25 6 2 0, PVQ/8040/27 50 2 3,7 27 7 2 0,7 PVQ/8050/27 63 6 39,7 32 22 5 0,24 PVQ/8063/27 80 6 49,7 36 22 5 0,37 PVQ/8080/27 00 20 59,7 4 27 20 0,59 PVQ/800/27 Universal piston rod eye UF Conforms to DIN ISO 839 B C F x H T kg Model 2 DH7 D2 D3 45 2 (S) 32 32 46 8 0,5 2 6,6 30 5 6,8 0,0 Q/8032/4 40/50 36 55 2 2 6 9 5,6 36 8 9 0,4 Q/8040/4 63/80 42 65 23 3 20 8,6 40 20 0,8 Q/8063/4 00 50 75 28,5 6 25 4 20 2 50 25 3 0,34 Q/800/4 Wide hinge SW Conforms to ISO 5552, type B7 CN H 7 C N -0, ø CK H 9 M G ø D KK Z Z C Thread KK X C CN H7 L N -0, L Z kg Model (UF) 32 M0x,25 20 43 0 4 4 5 3 0,09 QM/8025/32 40 M2x,25 22 50 2 6 6 7 3 0,3 QM/8040/32 50/63 M6x,5 28 64 6 2 2 22 5 0,33 QM/8050/32 80/00 M20x,5 33 77 20 25 25 26 5 0,67 QM/8080/32 Corrosion protected version 32 M0x,25 20 43 0 4 4 5 3 0,09 PVQM/8025/32 40 M2x,25 22 50 2 6 6 7 3 0,3 PVQM/8040/32 50/63 M6x,5 28 64 6 2 2 22 5 0,33 PVQM/8050/32 80/00 M20x,5 33 77 20 25 25 26 5 0,4 PVQM/8080/32 32 M0x,25 20 43 0 4 4,5 4 3 0,07 KQM/8032/32 40 M2x,25 22 50 2 6 6,5 6 3 0, KQM/8040/32 50/63 M6x,5 28 64 6 2 2,5 2 5 0,2 KQM/8050/32 80/00 M20x,5 33 77 20 25 25,5 25 5 0,38 KQM/8080/32 X L ø S K K 2 G 2 G 3 C CKH9 D H2 M G G2 G3 K K2 L S kg Model (SW) 32 32 0 7 25,5 2 8 3 38 50,6 0 6,6 0,05 M/P9493 40 36 2 9 27,5 24 22 35 4 54,6 6,6 0,07 M/P9494 50 45 2 5 3,5 33 30 45 50 65,6 3 9 0,4 M/P9495 63 50 6 5 2 39,5 37 35 50 52 67,6 5 9 0,8 M/P9496 80 63 6 8 4 49,5 47 40 60 66 84 2,5 5 0,28 M/P9497 00 7 20 8 5 59,5 55 50 70 76 94 2,5 9 0,42 M/P9498 Corrosion protected version 32 32 0 8 26,5 2 8 3 38 5,6 0 6,6 0,05 M/P40459 40 36 2 0 28,5 24 22 35 4 54,6 6,6 0,07 M/P40460 50 45 2 5 2 32,5 33 30 45 50 65,6 3 9 0,4 M/P4046 63 50 6 5 2 40,5 37 35 50 52 67,6 5 9 0,8 M/P40462 80 63 6 8 4 50,5 47 40 60 66 86 2,5 5 0,28 M/P40463 00 7 20 8 5 60,5 55 50 70 76 96 2,5 9 0,42 M/P40464 32 32 0 8 26 2 8 3 38 5,6 0 6,6 0,5 M/P72288 40 36 2 0 28 24 22 35 4 53,6 6,6 0,2 M/P72289 50 45 2 5 2 32 33 30 45 50 65,6 3 9 0,4 M/P72290 63 50 6 5 2 40 37 35 50 52 67,6 5 9 0,53 M/P7229 80 63 6 8 4 50 47 40 60 66 86 2,5 5 0,82 M/P72292 00 7 20 8 5 60 55 50 70 76 96 2,5 9,22 M/P72293 H 2 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH en.5.240.3
Universal rear eye U Conforms to ISO 5552, type MP6 Narrow hinge SS Dimensions in mm Projection/First angle N Z FL CN H 7 ø CN G 7 ø D M C G Z L ø S H 2 G 2 K G 3 K 2 CN H7 N FL Z kg Model (U) 32 0 4 6 22 4,5 3 0,5 Q/8032/33 40 2 6 8 25 8 3 0,25 Q/8040/33 50 6 2 2 27 9 5 0,40 Q/8050/33 63 6 2 23 32 24 5 0,55 Q/8063/33 80 20 25 28 36 24 5 0,90 Q/8080/33 00 20 25 30 4 29 5,50 Q/800/33 Corrosion protected version 32 0 4 6 22 4,5 3 0,5 PVQ/8032/33 40 2 6 9 25 8 3 0,25 PVQ/8040/33 50 6 2 2 27 9 3 0,4 PVQ/8050/33 63 6 2 24 32 24 5 0,55 PVQ/8063/33 80 20 25 28 36 24 5 0,9 PVQ/8080/33 00 20 25 30 4 29 5,5 PVQ/800/33 C CNG7 D H2 M G G2 G3 K K2 L S kg Model (SS) 32 32 0 8 0 2 8 3 38 5,6 0 6,6 0,5 M/P993 40 36 2 0 2 24 22 35 4 54,6 6,6 0,20 M/P9932 50 45 6 5 2 6 33 30 45 50 65,6 3 9 0,48 M/P9933 63 50 6 5 2 6 37 35 50 52 67,6 5 9 0,50 M/P9934 80 63 20 8 4 20 47 40 60 66 86 2,5 5 0,75 M/P9935 00 7 20 8 5 20 55 50 70 76 96 2,5 9,20 M/P9936 Swivel hinge US Conforms to VDM 24562 part 2 N 0, ø CN H 7 U Z G ø D Z L H 2 CH ø S G 2 K G 3 K 2 CH CN H7 D N -0, U G G2 G3 H2 K K2 L S Z kg Model (US) 32 32 0 4 6 0,5 2 8 3 0 38 5,6 6,6 3 0,9 M/P4030 40 36 2 6 8 2 24 22 35 0 4 54,6 6,6 3 0,24 M/P403 50 45 6 5 2 2 5 33 30 45 2 50 65,6 9 3 0,46 M/P4032 63 50 6 5 2 23 5 37 35 50 2 52 67,6 9 5 0,59 M/P4033 80 63 20 8 25 28 8 47 40 60 4 66 86 2,5 5,03 M/P4034 00 7 20 8 25 30 8 55 50 70 5 76 96 2,5 5,40 M/P4035 Cover screw (stainless steel) M K L M K L kg Model 32/40 M6 0 5,5 0,5 0,08 PVQ/882032/88 50/63 M8 3 6,8 0,5 0,04 PVQ/882050/88 80/00 M0 7 8,4 0 0,072 PVQ/882080/88 en.5.240.4 without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH
Technical data - eed switches - additional informations see data sheet N/en 4.3.005 Symbol Voltage *2) Current maximum Function Temperature LD Protection class Features Cable length (m) Cable type Weight Model (V a.c.) (V d.c.) (m) ( C) (g) ~ + BN 0... 240 0... 70 80 Closer -25... +80 IP66 2 PVC 2 x 0,25 37 M/50/LSU/2V ~ BU *2) Supply voltage 24 V d.c. (± 0%) max for P./88200/M only. ttention: eed switches for 40... 00 mm useable only! Drawings M/50/LSU/2V, Cable length L = 2 m -B L +30 Dimensions in mm Projection/First angle 5, 30 50 +0 ø 6,4,5 B 2 Fixing screw 2 Color code: BK = black; BN = brown; BU = blue Technical data - Solid state - additional informations see data sheet N/en 4.3.007 Symbol Voltage *2) (V d.c.) pnp + BN BU BK Current max. (m) Function Temperature LD Protection class Features Cable length Cable type Weight Model ( C) (m) (g) 0... 30 50 PNP -40... +80 IP67 2 PVC 3 x 0,2 37 M/50/P/2V *2) Supply voltage 24 V d.c. (± 0%) max for P./88200/M only. Drawings M/50/P/2V, Cable length L = 2 m -B L +30 42 ±4 5, 30 ø 6,4,5 B 2 Fixing screw 2 Color code: BK = black; BN = brown; BU = blue Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NOGN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. without notice, the specifications given in this document. (204-233c) 205 Norgren GmbH en.5.240.5