Stainless Steel Banding Products. For use on wood, steel and concrete utility poles. macleanpower.com

Similar documents
macleanpower.com Platforms and Mounts

POLE MOUNTED CAPACITOR RACKS

ALUMA FORM LIGHT WEIGHT MOUNTS FOR TRANSFORMERS

Light Weight Mounts for Transformers PRIMARY METERING MOUNTS

For mounting. cutouts, power fuses, arresters, capacitors, terminations, conduit EQUIPMENT MOUNTS

Index. Aluma Form, ALUMA-FORMEQUIPMENT MOUNTS Inc. WORLD S MOST COMPLETE LINE

Walk-In Tool Trailers 16-foot

Catalog 14A January 2013

320A Single Phase URD Meter Loop Installations

Fiber Optic Above-Ground) Cross-Connect Enclosure (ACE) Model ACE-200DS Installation Guide)

MINIMUM DISTRIBUTION SYSTEM CONCEPTS AND APPLICATIONS. Larry Vogt. Manager, Rates

MEH Series Sectionalizing Enclosures. Single-Phase and Three-Phase

PRODUCT/SERVICE CLASSIFICATION CLASS 285 ELECTRICAL EQUIPMENT AND SUPPLIES (EXCEPT CABLE AND WIRE)

INSTALLATION INSTRUCTIONS

AGRICULTURAL UNDERGROUND SERVICE 500 HP OR LESS

FIBERGLASS DEAD-ENDS & TANGENT ARMS

D9-3. No. WIRING DIAGRAM CONNECTIONS FOR UNDERGROUND SELF CONTAINED METERS JRH JED krich95 LINE LINE ABCN SOURCE SOURCE GROUND GROUND STUD STUD SOURCE

Distribution Arresters

BRACKETS, MOUNTS & HARDWARE

THE DAYTON POWER AND LIGHT COMPANY Original Sheet No. 15 DPL Building Courthouse Plaza Southwest Dayton, Ohio P.U.C.O. NO. 1

FROM B.C. HYDRO ENCLOSURE (SEE NOTE 4) RIGID CONDUITS (SEE NOTE 8) ALTERNATIVE TO LOAD BARRIER (SEE NOTE 7) SERVICE ENTRANCE ENCLOSURE

7 Single Family Service

Fullsize Van & Sprinter Lowtop

CABINET OPTIONS AND DESIGNATORS CODE LETTERS

UNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.

DO NOT DISCARD Important information for AIRPORT MAINTENANCE DEPT

SYSTEM PROTECTION - PLATING

Wisconsin Public Utility Institute. June 28, Minimum Distribution Charges. Larry Vogt. Director, Rates Mississippi Power

SECTION 300 OVERHEAD SERVICE

UNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.

PRODUCT NAME ORDER # PAGE # ANTENNAS

CENTER BREAK GROUP OPERATED AIR BREAK SWITCHES RATED 15.5kV THROUGH 170kV EFFECTIVE DATE: 10/25/16 REV B

Sprinter Hightop. H 1 Series Aluminum INSTRUCTION MANUAL. General Hardware/Accessories. Power Tool with Phillips head. 1/2 Wrench.

Options. Meter base. Cooling Up fan to 22 kaic rated breakers SERVICE

CI/W_ C2 C2A CI/W_ C2 C2A

OPTEVA 923 IN LOBBY TELLER (ILT) PLAN mm (60") WIDE PLAN - STAND ALONE FRONT VIEW SIDE VIEW PAGE 1 OF 5 CALL NOTE:

Technical Specification for Pole Mounted Capacitor Rack

SERVICE REQUIREMENTS COMMERCIAL & INDUSTRIAL CUSTOMERS

Specifications. S&C Omni-Rupter Switches Outdoor Distribution (14.4 kv and 25 kv) Conditions of Sale

Three-Phase Pole Mounted Recloser

7. Residential Single-Family and Duplex Buildings (Dwellings)

CATALOG OF REPLACEMENT PARTS C24EA SERIES STEAMER 3-PAN BASIC. ML /240 V. 8.5kW ML V. 8.5kW 3-PAN PRO

VEHICLE YEAR FRONT CENTER REAR CHEVY VAN UP TILL

CABLE TERMINALS

DO NOT DISCARD Important information for AIRPORT MAINTENANCE DEPT

JACKSON ELECTRIC COOP METER LOOP CONSTRUCTION SPECIFICATIONS JUNE 2018

2015 CATALOG. Cargo Control FOR THE ROAD AHEAD HEAVY DUTY PRODUCTS.

34.00 METERING GENERAL LABELING MULTIPLE METER ENCLOSURES ON A SINGLE PREMISE

A. Submit manufacturer's literature and technical data before starting work.

E R C. R E R C ; ; W T E C

Sunwize Power Ready Express Quick Start

Specifications CCS1902

Armoured Cable/Flex. Conduit

METER INSTALLATIONS

Congratulations on purchasing the epump solar pumping solution.

Frame Width. Seating Setup. q 16 q 15 q 14 q 17 q 16 q 15 q 14 Short q 18 q 17 q 16 q 15 q 14 q 19 q 18 q 17 q 16 q 15 q 14

VERSIONS. zinc-plated steel stainless steel highly corrosion-resistant steel BUILDING MATERIALS

ChargePro 620 Electric Vehicle Charging Station Installation Guide

Type M3 Hookstick Disconnect Switches Up to 38kV 600 or 900 Amp 40kA Momentary

MOTORIZED INSTALLATION INSTRUCTIONS

Disconnect & ByPass Switches

2 Door Assembly - Includes an aluminum door with two huck riveted galvanized door


Two Seas Metalworks Shell Lane fax Rev

Floodlighting Accessories

Sub Base Fuel Tank With Walk-in Type Enclosure. Installation Instructions

User s Guide. Includes Mounting, Installation, and Product Registration

Installer: START HERE

ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.

Floor Doors. Babcock-Davis Always right there.

Wildlife Power Outage Protection Products

Woda-Sci System Installation Parts Set

Optional grille fixings

Powered Hoists. Catalog 1150 July Hoists - Powered Phone: Web: hubbellpowersystems.

A. This Section includes Low Voltage Switchgear Work, as indicated on the drawings, and as specified herein.

CATALOG OF REPLACEMENT PARTS

UG FEEDING OH UG FEEDING OH. Electric Distribution Standards I. INTRODUCTION

Door Locks. Pocket Door Hardware. Folding Door Lock ST10641 CD1064-US3 Brass 5 $18.80

TO BE USED FOR MAINTENANCE MICHIGAN DEPARTMENT OF TRANSPORTATION. 2 3/16" x 2 3/16" x 10 Ga. 12" 15.5" 1 1/2" x 1 1/2" x 12 Ga.

UNDERGROUND SERVICE. Items to consider. There will be charges from ComEd if you convert from overhead to underground service.

For additional pricing and specifications, contact H&H direct at or phone H&H Utility DumpBox Trailers

ELECTRIC SERVICE RULES DISTRIBUTED GENERATION Issued Jan 2016

Specifications. S&C Type XS Fuse Cutouts. Outdoor Distribution (4.16 kv through 25 kv)

AMENDMENT ELECTRIC SERVICE MANUAL 2014

Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater

ALEXANDRIA, VIRGINIA PRINCE ST. SUITE 114. ADG, INC. COPYRIGHT c. PH

Item Code Description Unit Qty Total

ILFS 33, 38. Distribution Pro PARTS BREAK DOWN. Interlift Inc. dba MBB Palfinger

SEA PORT MARINE CORP.

For Conduit Inspections

4.1 MOVE. ORDER FORM - CANADA Ship to: Name: Address: Account: Vendor: Date: Ordered by: Marked for: User manual: PO: Postal Code: Phone:

PROTECTION ARRESTERS FUSES WILDLIFE

Number Tube I.P.S. Rod Size or O.D. Range Cable H J W

TG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices

This form must be opened in Adobe Acrobat. The Submit Form button will not work from most browser windows. AADL CAT # 151.

18 Wide. MRI Transport Wheelchairs. Overall Width: 26 Wheelchair, With Fixed Footrest. Specifications:

PSC Terminations. Features Class 1 (outdoor) termination as defined in IEEE 48 standard. For use on all extruded dielectric cables.

CONSTRUCTION STANDARD ELECTRIC OPERATIONS ORGANIZATION

Product Catalogue.

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70

Transcription:

Stainless Steel Products For use on wood, steel and concrete utility poles macleanpower.com

MPS Stainless Steel Products Stainless with Buckle Stainless Double with Buckles MBAB Series Page 3 MBAB-2 Series Page 3 Stainless with Buckle U-guard and Conduit Straps MHDBB-1511 Series Page 4 MBST Series Page 4 Small General Purpose Mount Medium General Purpose Mount MMD-4080 Page 5 MD-4080-BS1 Page 5 1

Stainless Bulk aging Buckles for Stainless MXXX-201-SSB-100 Series Page 3 MBAB Series Page 3 Stainless Service Drop Stainless Cable Tie Retainer MBSD-38 Page 5 MCTR Page 5 Large General Purpose Mount Transformer Mounting Bracket MD-4080-BS2 Page 5 MBB-5M1-6LB Page 5 2

Stainless Steel Products MacLean stainless banding is made of 201 annealed stainless steel. This material has a tensile of 95,000 PSI and a yield of 45,000 PSI. Stainless banding comes in sizes of.030" thick x 3/4" width, or.044" thick x 1-1/4" width. Stainless with Buckle Band Type Length Width Hardware Size (Lbs.) Single MBAB-3836 36" 3/4" 3/8" 24 0.77 MBAB-3840 40" 3/4" 3/8" 24 0.82 MBAB-3848 48" 3/4" 3/8" 24 0.87 MBAB-3860 60" 3/4" 3/8" 24 0.92 MBAB-3872 72" 3/4" 3/8" 24 1 MBAB-3884 84" 3/4" 3/8" 24 1.12 MBAB-5836 36" 1-1/4" 5/8" 24 1.82 MBAB-5840 40" 1-1/4" 5/8" 24 1.87 MBAB-5848 48" 1-1/4" 5/8" 24 1.97 MBAB-5860 60" 1-1/4" 5/8" 24 2.12 MBAB-5872 72" 1-1/4" 5/8" 24 2.32 MBAB-5884 84" 1-1/4" 5/8" 24 2.52 Double MBAB-5836 36" 1-1/4" 5/8" 24 3.54 MBAB-5848 48" 1-1/4" 5/8" 24 4.04 MBAB-5888 88" 1-1/4" 5/8" 24 7.54 Stainless Bulk aging Length Width (Lbs.) M3/4-201-SSB-100 100' 3/4" 1 8.02 M1-1/4-201-SSB-100 100' 1-1/4" 1 19.03 Buckles for Stainless (Lbs.) MBAB-38 24 0.52 MBAB-58 24 1.27 3

MacLean stainless banding is made of 201 annealed stainless steel. This material has a tensile of 95,000 PSI and a yield of 45,000 PSI. Stainless banding comes in sizes of.030" thick x 3/4" width, or.044" thick x 1-1/4" width. Multi Purpose Mounting Bracket Width Std. MBB-1511-H 3/4" or 1-1/4" 24 0.62 Light Duty Mount with 5/8"x 2" Bolt MHDBB-1511-H 3/4" or 1-1/4" 24 0.87 MHDBB-1511-H3H 3/4" or 1-1/4" 24 1.02 MHDBB-1511-H3.5H 3/4" or 1-1/4" 24 0.98 Heavy Duty Mount with 5/8"x 2" Bolt Heavy Duty Mount with Grade 5, 5/8"x 3" Bolt Heavy Duty Mount with Grade 5, 5/8"x 3-1/2" Bolt U-guard and Conduit Straps Conduit Size Width MBST-1 1" 3/4" 24 0.09 MBST-2 2" 3/4" 24 0.13 MBST-3 3" 3/4" 24 0.17 MBST-4 4" 3/4" 24 0.19 MBST-5 5" 3/4" 24 0.25 MBST-6 6" 3/4" 24 0.29 4

Stainless Steel Products Stainless Service Drop Size MBSD-38 3/4" or 1-1/4" 50 0.084 Aluminum service drop for stainless banding Stainless Cable Tie Retainer Size MCTR 3/4" or 1-1/4" 100 0.018 Aluminum cable tie retainer for use with 3/4" or 1-1/4" stainless banding Stainless General Purpose Mount* *The bodies of the MD-4080 series are made from galvanized steel Size MD-4080 3/4" or 1-1/4" 5 6.52 Formed channel 10" x 5" with 2-1/2" legs, Center Mounting hole is 13/16" MD-4080-BS1 3/4" or 1-1/4" 5 7.28 Same as above, but with 5/8" x 3-1/2"hardware MD-4080-BS2 3/4" or 1-1/4" 5 10.57 Formed channel 14" x 5" with 2-1/2" legs, Comes with (2) - 5/8" x 3-1/2" hardware installed Stainless Transformer Mounting Bracket size MBB-5M1-6LB 3/4" or 1-1/4" 5 9.34 Adjustable transformer mounting bracket, Can mount 12" and 24" spacing transformers 5

Cross Reference MacLean Aluma-Form Hubbell Barfield Page # MBAB-3836 BAB-3836 CBAB3836 BAD1PLK-36 Assembled stainless banding with buckle 3 MBAB-3840 BAB-3840 CBAB3840 BAD1PLK-40 Assembled stainless banding with buckle 3 MBAB-3848 BAB-3848 CBAB3848 BAD1PLK-48 Assembled stainless banding with buckle 3 MBAB-3860 BAB-3860 CBAB3860 BAD1PLK-60 Assembled stainless banding with buckle 3 MBAB-3872 BAB-3872 CBAB3872 BAD1PLK-72 Assembled stainless banding with buckle 3 MBAB-3884 BAB-3884 CBAB3884 BAD1PLK-84 Assembled stainless banding with buckle 3 MBAB-5836 BAB-5836 CBAB5836 BAD2PLK-36 Assembled stainless banding with buckle 3 MBAB-5840 BAB-5840 CBAB5840 BAD2PLK-40 Assembled stainless banding with buckle 3 MBAB-5848 BAB-5848 CBAB5848 BAD2PLK-48 Assembled stainless banding with buckle 3 MBAB-5860 BAB-5860 CBAB5860 BAD2PLK-60 Assembled stainless banding with buckle 3 MBAB-5872 BAB-5872 CBAB5872 BAD2PLK-72 Assembled stainless banding with buckle 3 MBAB-5884 BAB-5884 CBAB5884 BAD2PLK-84 Assembled stainless banding with buckle 3 MBAB-5836 BAB-5836 CBAB5836 BAD2PLK-36 Assembled stainless banding with buckle 3 MBAB-5848 BAB-5848 CBAB5848 BAD2PLK-48 Assembled stainless banding with buckle 3 MBAB-5888 BAB-5888 CBAB5888 BAD2PLK-88 Assembled stainless banding with buckle 3 M3/4-201-SSB-100 3/4-201-SSB-100 C3/4201SSB100 SSTROLL-75 100' Roll of 3/4" 201 stainless banding 3 M1-1/4-201-SSB-100 1-1/4-201-SSB-100 C11/4201SSB100 SSTROLL-125 100' Roll of 1-1/4" 201 stainless banding 3 MBAB-38 BAB-38 CBAB38 BADPLK Buckle kit for 3/4" stainless banding 3 MBAB-58 BAB-58 CBAB58 BADPLK Buckle kit for 1-1/4" stainless banding 3 MBB-1511-H BB-1511-H - BMPPB-2 Light Duty Mount with 5/8"x 2" Bolt 4 MHDBB-1511-H HDBB-1511-H CHDBB1511H BMPPB-2HD Heavy Duty Mount with 5/8"x 2" Bolt 4 MHDBB-1511-H3H HDBB-1511-H3H CHDBB1511H3H BMPPB-3HD Heavy Duty Mount w/ Grade 5, 5/8"x 3" Bolt 4 MHDBB-1511-H3.5H HDBB-1511-H3.5H - - Heavy Duty Mnt w/ Grade 5, 5/8"x 3-1/2" Bolt 4 MBST-1 BST-1 - - U-guard and conduit straps 4 MBST-2 BST-2 - - U-guard and conduit straps 4 MBST-3 BST-3 - - U-guard and conduit straps 4 MBST-4 BST-4 - - U-guard and conduit straps 4 MBST-5 BST-5 - - U-guard and conduit straps 4 MBST-6 BST-6 - - U-guard and conduit straps 4 MBSD-38 BSD-38 - - Stainless banding service drop 5 MCTR CTR - - Stainless Cable Tie Retainer 5 MD-4080 MD-4080 CD4080 - Stainless banding general purpose mount 5 MD-4080-BS1 MD-4080-BS1 - - MD-4080-BS2 MD-4080-BS2 - - MBB-5M1-6LB BB-5M1-6LB - - Stainless banding general purpose mount with hardware Stainless banding general purpose mount with hardware Stainless banding transformer mounting bracket 5 5 5 6

Other Quality MacLean Products Anchoring Systems Surge Arresters Conductor Hardware Connectors Cutouts Enclosures and Pads Fiberglass Products Grounding and Tools Insulator Systems Pole Line Hardware Formed Wire Aluminum Mounts Telecommunications Hardware MacLean Power Systems 481 Munn Road, Suite 300 Fort Mill, SC 29715 USA fax 803.396.8601 macleanpower.com Customer Service 1.800.MPS.SHIP info@macleanpower.com Copyright 2014 MacLean Power Systems, Revised 07.01.14 LBSTBD.07.14 P O W E R S Y S T E M S