R82. p = 5mm. MKT Series R 8 2 C -

Similar documents
MSB Metallized polyester film capacitor MKT - High performance

MTB. MKT box with radial terminals small size general purpose. Ed. 04 Rev Dissipation factor (DF), max. tgδ x10-4, measured at 25 ±5 C

According to IEC , grade 1.1

Polypropylene Pulse/High Frequency Capacitors R74 Series Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade)

PHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1

Film Capacitors. Metallized Polyester Film Capacitors (MKT) Date: August 2004

MAB - (Updated approval references)

PPS. MKP axial terminals snubber medium-high pulse applications high current high frequency switching. Ed. 04 Rev

Applications R71 M F 2100 AA 00 J

THZ NEW - In Progress

Failure quota 300/10 9 component hours. Warning: this specification must be completed with the data given in the General technical information chapter

CMK Metallized polycarbonate CECC approval, detail specification According to CECC 30500, IEC 384-6

Film Capacitors. Metallized Polyester Film Capacitors (MKT-S) Date: August 2004

Applications R46 K I M

PSB / RSB - (Expanded range)

MHBS (MHB version S) NEW in progress

MPPB Series. Metallized Polypropylene Film Capacitor Box type. Metallized Polypropylene Film Capacitor - Box type Features. Typical Applications

Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.

Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)

Energy sector DC LINK CAPACITORS AND SNUBBERS

Temperature= +40±2 C Capacitance change ±3%

Polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.

Polypropylene Pulse/High Frequency Capacitors R75 Series Single Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)

Configuration. Specification: Capacitance Range. Insulation Resistance. Maximum Pulse Rise Time(V/μsec.): Shown As Following Table.

Common to almost all eco-friendly lighting.

Applications F5A H C 4100 DQ A 6 K. Lead and Packaging Code See Ordering Options Table. Capacitance Code (pf)

Metallized Polypropylene Film Capacitors (MKP)

1000 VDC 1250 VDC 125 VAC 250 VAC J K M 125 VAC, 250 VAC

Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation

Applications R47 5 I M

Metallized Polypropylene Film Capacitor DC-Link capacitor

Rated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.

Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation

Applications F 611 J F 104 M 050 C. First two digits represent significant figures. Third digit specifies number of zeros.

Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation

Applications F 622 J F 104 M 050 C. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.

MKT (Box) PCX MKP (Box) PCMP 389. MMKP (Box) PCMP 384. MMKP (Dipped) PCMP 483. MKP (Dipped) PCMP 489. MKT (Dipped) PCMT 362 PFC Input 30

Crimped taping. W NOTE: Straight lead not recommended Explanation of Part Number for Odd Size Taping

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type

Applications R46 K I M

Applications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T

General Purpose, Pulse and DC Transient Suppression MDK Series Metallized Polyester Film, Dual In-Line, Low ESR/ESL, VDC.

Metallized Polypropylene Film Capacitor (Plastic Case) AC Application (2 or 4 pins)

CAPACITOR CATALOG SPE GROUP. Capacitor & Diode ISO Professional Manufacturer. To Support the success of enterprise To Support a successful enterprise

Applications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T

Applications R60 M F 2470 AA 60 K

Applications R46 3 N M. Capacitance Code (pf)

100V 160V 200V 250V 400V

SPECIFICATION FOR APPROVAL

Multilayer Acrylic Polymer Film Capacitors

SPECIFICATION FOR APPROVAL

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R

1.0 Rated Values and Operational Data

General Purpose, Pulse and DC Transient Suppression A50 Series Metallized Polyester Film, Axial, 50 1,000 VDC. Applications

Capacitance range: mf to 25 mf Rated voltages: 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC

SMD High Power Precision Resistors

High Security Capacitors with controllable metallized frame layers

General Purpose, Pulse and DC Transient Suppression A50 Series Metallized Polyester Film, Axial, 50 1,000 VDC (Automotive Grade) Applications

MMP - Metal Film MELF

CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS

mm. Film dielectric trimmers QUICK REFERENCE DATA

General Purpose, Pulse and DC Transient Suppression SMR, Metallized Polyphenylene Sulfide Film, +150 C, mm Lead Spacing, VDC

EMI Suppression Capacitors

Applications SMR K 50 J01 L4 BULK. Capacitance Tolerance H = ±2.5% J = ±5% K = ±10% M = ±20% F 211 J F 104 K 050 C

Snubber, High Current DC, and Switching Capacitors

16 ~ 250 VDC -40 ~ +105 C 820~250000µF ± 20% For capacitance values > 33000µF, add the value of:

V35, V40, V50, V60, V75, V95, V130, V140, V150, V175, V230, V250, V275, V300, V385, V420, V460, V510 CSA Recognized File No.

Metallized Polypropylene Film Capacitors PCPW 245 ( DC-link application )

Anti-Surge Thick Film Chip Resistors

Resin-Coated, Radial-Leaded Solid Tantalum Capacitors

SPRING - LOADED CONNECTORS

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C

film capacitors QUICK REFERENCE DATA Pilkor components FEATURES APPLICATIONS 10 and 15mm 22.5 and 27.5mm

Printed Circuit Board Mount Power Film Capacitors C4G Series, Axial Round, VDC/ VAC. Applications. Lead Diameter (mm) Insulation

SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512

MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED

Ceramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv

Anti-Surge Thick Film Chip Resistors

High Power Film Capacitors

THIS PAGE WAS INTENTIONALLY LEFT BLANK.

For capacitance values > 33000µF, add the value of: 3 CV (µa) max. after 5 minutes; C = Capacitance in µf, V = WV ~ k 10k

P-Series 11 to to to to to to to 1100 >1000 <25

Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance

NTC thermistors for temperature measurement

Type 947C Polypropylene, DC Link Capacitors High Current, High Capacitance for Inverter Applications

FEATURES Compliant to the RoHS2 directive 2011/65/EU For high frequency SMD Conformal Small and high CV. CASE DIMENSIONS: millimeters (inches)

SELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W

Surface-Mounted Ceramic EMI Filter Capacitors

VZCA2.E VZCA8.E CQC CQC CQC CQC CQC D-Seires. 11 to to 1465.

SELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC

Applications. Internal Connection

CARLI ELECTRONICS CO., LTD

Contents CORNELL DUBILIER

Highest CV/cc Conductive Polymer Chip Capacitors Undertab FEATURES

NTC Thermistor:TTC05 Series

UL Recognised Wirewound Resistors

Applications SPC K 100 K33 TR12. Capacitance Tolerance G = ±2% H = ±2.5% J = ±5% K = ±10% F 127 S L 471 K 100 V

1 7 ASC_WF06A_V01 NOV

Transcription:

Loose All dimensions are in mm. Taped R82 Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. p = 5mm B 6 >6 Ød ±0.05 0.5 0.6 Pitch Box thickness (B) imum dimensions (mm) (mm) (mm) B max H max L max 5.0 <4.5 B +0.1 H +0.1 L +0.2 5.0 4.5 B +0.1 H +0.1 L +0.3 Product code system The part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 R 8 2 C - Digit 1 to 3 Series code. Digit 4 d.c. rated voltage: C = 50V D = 63V E = 100V I = 250V M = 400V Digit 5 Pitch: C = 5 mm Digit 6 to 9 Digits 7-8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Capacitance in pf. Digit 10 to 11 Mechanical version and/or packaging (table1) Digit 12 Digit 13 Digit 14 Identifies the dimensions and electrical characteristics. Capacitance tolerance: J=5%; K=10%; M=20%. Table 1 (for more detailed information, please refer to page 14). Standard Lead length Ordering code packaging style (mm) (Digit 10 to 11) AMMO-PACK DQ Reel Ø 355 mm CK Loose, short leads 4 +1.5 AA Loose, long leads 17 +1/-2 Z3 GENERAL TECHNICAL DAta Dielectric: polyester film (polyethylene terephthalate). Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. Marking: Capacitance, tolerance, D.C. rated voltage. Climatic category: 55/105/56 IEC 60068-1 Operating temperature range: -55 to +105 C Related documents: IEC 60384-2 Winding scheme single sided metallized polyester film 09/2008 26

a) STACKED version b) WOUND version R82 50Vdc/30Vac K 0 a) 2.2 µf 6.0 11.0 7.2 5.0 100 10.0 E3 R82CC 4220--7-- b) 3.3 µf 7.2 13.0 7.2 5.0 25 2.5 E3 R82CC 4330--3-- b) 4.7 µf 7.2 13.0 7.2 5.0 25 2.5 E3 R82CC 4470--3-- STACKED version 63Vdc/40Vac K 0 0.10 µf 2.5 6.5 7.2 5.0 160 20 E3 R82DC 3100--5-- 0.15 µf 2.5 6.5 7.2 5.0 160 20 E3 R82DC 3150--6-- 0.22 µf 2.5 6.5 7.2 5.0 160 20 E3 R82DC 3220--6-- 0.33 µf 3.5 7.5 7.2 5.0 160 20 E3 R82DC 3330--6-- 0.47 µf 3.5 7.5 7.2 5.0 160 20 E3 R82DC 3470--6-- 0.68 µf 4.5 9.5 7.2 5.0 160 20 E3 R82DC 3680--6-- 1.0 µf 5.0 10.0 7.2 5.0 160 20 E3 R82DC 4100--6-- 1.5 µf 6.0 11.0 7.2 5.0 160 20 E3 R82DC 4150--6-- 100Vdc/63Vac K 0 1000 pf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1100--5-- 1500 pf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1150--5-- 2200 pf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1220--5-- 3300 pf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1330--5-- 4700 pf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1470--5-- 6800 pf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1680--5-- 0.010 µf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2100--5-- 0.015 µf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2150--5-- 0.022 µf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2220--5-- 0.033 µf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2330--5-- 0.047 µf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2470--6-- 0.068 µf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2680--6-- 0.10 µf 2.5 6.5 7.2 5.0 200 40 E3 R82EC 3100--7-- 0.15 µf 3.5 7.5 7.2 5.0 200 40 E3 R82EC 3150--7-- 0.22 µf 3.5 7.5 7.2 5.0 200 40 E3 R82EC 3220--7-- 0.33 µf 4.5 9.5 7.2 5.0 200 40 E3 R82EC 3330--7-- 0.47 µf 4.5 9.5 7.2 5.0 200 40 E3 R82EC 3470--7-- 0.68 µf 5.0 10.0 7.2 5.0 200 40 E3 R82EC 3680--7-- 1.0 µf 6.0 11.0 7.2 5.0 200 40 E3 R82EC 4100--7-- All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (V R ), the capacitor may work at higher. In this case the maximum value allowed is obtained multiplying the above value (see table ) with the ratio V R /V. The pulse characteristic K 0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. 250Vdc/140Vac Reduced sizes 250Vdc/160Vac K 0 K 0 0.022 µf 2.5 6.5 7.2 5.0 130 65 E3 R82IC 2220--6-- 0.047 µf 3.5 7.5 7.2 5.0 130 65 E3 R82IC 2470--6-- 0.068 µf 3.5 7.5 7.2 5.0 130 65 E3 R82IC 2680--6-- 0.10 µf 4.5 9.5 7.2 5.0 130 65 E3 R82IC 3100--6-- 0.15 µf 5.0 10.0 7.2 5.0 130 65 E3 R82IC 3150--6-- 0.22 µf 6.0 11.0 7.2 5.0 130 65 E3 R82IC 3220--6-- 6800 pf 2.5 6.5 7.2 5.0 250 125 E3 R82IC 1680--5-0.010 µf 2.5 6.5 7.2 5.0 250 125 E3 R82IC 2100--5-- 0.015 µf 2.5 6.5 7.2 5.0 250 125 E3 R82IC 2150--5-- 0.022 µf 3.5 7.5 7.2 5.0 250 125 E3 R82IC 2220--5-- 0.033 µf 3.5 7.5 7.2 5.0 250 125 E3 R82IC 2330--5-- 0.047 µf 4.5 9.5 7.2 5.0 250 125 E3 R82IC 2470--5-- 0.068 µf 4.5 9.5 7.2 5.0 250 125 E3 R82IC 2680--5-- 0.10 µf 5.0 10.0 7.2 5.0 250 125 E3 R82IC 3100--55-0.15 µf 6.0 11.0 7.2 5.0 250 125 E3 R82IC 3150--5-- 400Vdc/160Vac Reduced sizes K 0 6800 pf 2.5 6.5 7.2 5.0 200 160 E3 R82MC1680--6-- 0.015 µf 3.5 7.5 7.2 5.0 200 160 E3 R82MC2150--6-- 0.033 µf 4.5 9.5 7.2 5.0 200 160 E3 R82MC2330--6-- 0.047 µf 5.0 10.0 7.2 5.0 200 160 E3 R82MC2470--6-- 0.068 µf 6.0 11.0 7.2 5.0 200 160 E3 R82MC2680--6-- 400Vdc/200Vac K 0 1000 pf 2.5 6.5 7.2 5.0 400 320 E3 R82MC1100--5-- 1500 pf 2.5 6.5 7.2 5.0 400 320 E3 R82MC1150--5-- 2200 pf 2.5 6.5 7.2 5.0 400 320 E3 R82MC1220--5-- 3300 pf 2.5 6.5 7.2 5.0 400 320 E3 R82MC1330--5-- 4700 pf 2.5 6.5 7.2 5.0 400 320 E3 R82MC1470--5-- 6800 pf 3.5 7.5 7.2 5.0 400 320 E3 R82MC1680--5-- 0.010 µf 3.5 7.5 7.2 5.0 400 320 E3 R82MC2100--5-- 0.015 µf 4.5 9.5 7.2 5.0 400 320 E3 R82MC2150--5-- 0.022 µf 4.5 9.5 7.2 5.0 400 320 E3 R82MC2220--5-- 0.033 µf 5.0 10.0 7.2 5.0 400 320 E3 R82MC2330--5-- 0.047 µf 6.0 11.0 7.2 5.0 400 320 E3 R82MC2470--5-- 27 09/2008

electrical characteristics voltage (V R ): 50 Vdc 63 Vdc 100 Vdc 250 Vdc 400 Vdc temperature (T R ): +85 C Temperature derated voltage: for temperatures between +85 C and +105 C a decreasing factor of 1.25% per degree C on the rated voltage V R (d.c. and a.c.) has to be applied. Capacitance range: 1000pF to 4.7µF Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 khz): ±5% (J); ±10% (K); ±20% (M). Total self-inductance (L): 7nH max 1 nh per 1 mm lead and capacitor length. Dissipation factor (DF): tgδ 10-4 at +25 C ±5 C khz C 0.1µF C > 0.1µF 1 10 100 80 120 250 80 120 Insulation resistance: Voltage charge time: +25 C±5 C 1 min Voltage charge: 50 Vdc for V R <100 Vdc 100 Vdc for V R 100 Vdc For V R 100 Vdc 15000 MΩ for C 0.33µF 5000 s for C > 0.33µF and 1µF 1000 s for C > 1µF For V R >100 Vdc 30000 MΩ *Typical value Test voltage between terminations: 1.4xV R applied for 2 s at +25 C±5 C. test method and performance Damp heat, steady state: +40 C±2 C Relative humidity (RH): 93% ±2% Test duration: 56 days Capacitance change C/C : 5% DF change ( tgδ): 50x10-4 at 1kHz Insulation resistance: 50% of initial limit. Endurance: +105 C ±2 C Test duration: 2000 h Voltage applied: 1.25xV C Capacitance change C/C : 5% DF change ( tgδ): 30x10-4 at 10kHz for C 1µF 20x10-4 at 1kHz for C>1µF Insulation resistance: 50% of initial limit. Resistance to soldering heat: Solder bath temperature: +260 C±5 C Dipping time (with heat screen):10 s ±1 s Capacitance change C/C : 2% DF change ( tgδ): 30x10-4 at 10kHz for C 1µF 20x10-4 at 1kHz for C> 1µF Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (see page 12). Capacitance change C/C : 3% for C 0.1µF 2% for C> 0.1µF Reliability: Reference MIL HDB 217 Application conditions: +40 C±2 C Voltage: 0.5xV R Failure rate: 1 FIT (1 FIT = 1x10-9 failures/components x h) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change C/C : > 10% DF change ( tgδ): > 2 x initial limit. Insulation resistance: < 0.005 x initial limit. 09/2008 28

MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40 C) 29 09/2008

MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40 C) 1 09/2008 30

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback