No. Type of Tests Test Method Sample size Duration 1. Condition in Container MS 134 : 2007

Similar documents
ALBERTA TRANSPORTATION TECHNICAL STANDARDS BRANCH TPC SPECIFICATION FOR WHITE AND YELLOW TRAFFIC PAINT

ALBERTA INFRASTRUCTURE AND TRANSPORTATION TECHNICAL STANDARDS BRANCH TPC-05 SPECIFICATION FOR WHITE AND YELLOW TRAFFIC PAINT

MATERIAL SPECIFICATION FOR ORGANIC SOLVENT BASED TRAFFIC PAINT

Award (Y / N) Reason UOM Supplier Qty Price

Laboratory Reliable Analytical Laboratories Private Limited, Reliable House, 125 Indian Corpn Complex, Mankoli, Bhivandi, Thane, Maharashtra

Various tests and analysis will be carried out at testing laboratory on the received samples such as:

Hari Shankar Singhania Elastomer & Tyre Research Institute, HASETRI, Plot No. 437, R&D Center, Hebbal Industrial Area, Mysuru, Karnataka

DMS-9203, Asphaltic Concrete Patching Material (Containerized)

Geoscience Testing laboratory (Al Ain)

Section 4 DMS-9203, Asphaltic Concrete Patching Material (Containerized)

Opening the Door to High Performance at Low VOC. All acrylic resin delivering high performance at low VOC for satin through gloss paints

MARINE SYSTEMS FOR DECKS SYSTEM. a six page issue January 2010 revision of May Application areas: all decks on ships, interior and exterior

Pre-Installation. Surface Preparation TRAFFIC STRIPES, EPOXY RESIN

DMS-9202, Asphaltic Concrete Patching Material (Stockpile Storage)

NEW! NEW! Series 3100H HVLP AirSpray Gun HVLP 1 Qt. Cup Siphon Fed Guns Air Requirements: PSI

Technology Information. Aquamediates

Admaterials Technologies Pte Ltd Certificate No. : LA B 58 Sungei Kadut Loop Singapore Issue No. : 14

ELIN CARC&WATER NSN MIL SPEC ITEM NAME MIL-DTL-64159

Carboset 7733 Acrylic Copolymer Emulsion TECHNICAL DATA SHEET

Memorandum. From: Date: Arports Regional Division Managers

NAVSEA REVIEWED ASTM F-718. Intershield 300HS, High-Solids Abrasion- Resistant Aluminum Pure Epoxy Anticorrosive

DMS ASPHALTIC CONCRETE PATCHING MATERIAL (STOCKPILE STORAGE)

PRODUCT AND COLOUR GUIDE

Tex-614-J, Testing Epoxy Materials

Heritage Research Group 940 N. Wynn Rd - Oregon, OH Phone (419) Fax (317)

Turbo Plus P488/P486-line. P486- Turbo Plus colour mixes and ready mixed colours. P Turbo Plus Extra Slow MS hardener

DMS-9202 Asphaltic Concrete Patching Material (Stockpile Storage or Bagged)

Company Name Number for Support

Assembly and Maintenance Instructions. Pad Thrust Bearings

Marking Fee for IS 636:1988 Non-percolating Flexible Delivery Hose for Fire Fighting

Rick Marinelli. Manager, Airport Engineering Division, AAS

MATERIAL AND EQUIPMENT STANDARD FOR FAST DRYING SYNTHETIC PRIMER TO BE USED WITH HOT APPLIED COAL TAR OR BITUMEN (ASPHALT) ENAMEL ORIGINAL EDITION

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Professional Finishing. Hydraulic piston pumps. HeavyCoat. Extremely powerful. Versatile and flexible. Electric or petrol driven

NAVSEA REVIEWED ASTM F-718. SeaVoyage Copper Free Antifoulant; N51R301 Red, N51B301 Black, N51L301 Blue

RAYMARK LABELS SCOPE. This Quality Assurance Specification establishes the quality standard for Tyco Raymark Labels

Performance and Safety Enhancements using New Preservation Techniques

SECTION 6 5 SERVICE PROCEDURES AND SPECIFICATIONS. Body

PERFORMALOC 9000 Advanced Productivity Coatings from PPG

ALPHA 70K TMA (Truck Mounted Attenuator) GENERAL SPECIFICATIONS

Yes. The driving tests are conducted in almost all motorcycle categories for a reason.

EVOQUE 1330 Pure Acrylic Pre-Composite Polymer

Professional Finishing. Hydraulic piston pumps. HeavyCoat. Extremely powerful. Versatile and flexible. Electric or petrol driven

SECTION 6 5 SERVICE PROCEDURES AND SPECIFICATIONS. Body

NAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.

IGS-IN-301(1) : National Iranian Gas Co. Research and Technology Management. Standardization Division IGS. Iranian Gas Standards

NAVSEA REVIEWED ASTM F-718. Part A: MS-200 / MS209R D. Gray / MS207R Green / MS205R Red / MS201R White / MS203R Yellow / MS218H Part B

Toyota Hydrobase Application

Title: Performance Requirements of Exterior Painted Parts

HA Thickness Gauge IS:2386 (part 1)- 1963

8 Technical Reference

NAVSEA REVIEWED ASTM F-718. MS-440G LR, Low Radar Signature Epoxy Nonskid Deck Coating

CORROSION PROTECTION CORROSION PROTECTION FEATURING RUST MORT RUST SEAL RUST TRAP RUST SHIELD RUST PREVENTER CAVITY WAX UNDERCOATINGS COMPARISON CHART

NAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.

Tex-614-J, Testing Epoxy Materials

Perlata. new bronze colours. Perlata

Significance of Each Test. 1. Color (Visual)

1.1 Unless otherwise stated, the specification references and test methods are from the latest version in effect at the time of this contract.

Oregon Department of Transportation Standard Specifications For Asphalt Materials 2004

Special Provision No. 111S12 July 2017

FineFinish TITAN fine finishing applications

INTERNATIONAL LUBRICANT STANDARDIZATION

ÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ TT-T-306E May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION

API Service Category SN. Comparative Review API SN and ILSAC GF-5 Revisions Based on January 8 Ballot Comments March 19, 2010

2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.

PS-20 and PS-22 Test Kits Instructions

BEVS New Products 2019

CENTRAL MARKS DEPARTMENT II (Legal) Our Ref: CMD-II(L)/16:

Draft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION

FACADES AND INTERIOR WALLS. Equipment for large construction sites and new-build FACADES AND INTERIOR WALLS - LARGE CONSTRUCTION SITES

--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T

DRAFT Jamaican Standard Specification for Bituminous materials

Safe-Stop TMA (Truck Mounted Attenuator) GENERAL SPECIFICATIONS

2.0E ES LVL U.S. Design Manual

DIVISION OR ACTIVITY. API Spec 10A. January 21, 2014

AAMA/WDMA/CSA 101/I.S.2/A TEST REPORT. Rendered to: MASTER WINDOW SYSTEMS, INC.

AUTOMOTIVE TESTS. BMW AUTOMOTIVE Pile Yarn Thickness $ 25.00

Perma-Shield Gliding Patio Doors

Product Specifications

Permacron Base Coat Series 295

ATTENTION: DIESEL FUEL USERS

Binks Model 95 SPRAY GUN

AUTOMOTIVE CARE. Lubricants Degreasers Rust Control - Cleaners Detailing Undercoatings Odor Neutralizers

Bonding & Fastening. Solutions. Panels. Information. All Around. Headliner. Instrument. Product. Page 1. Page 2. Page 3. Page 4-7

MIRTA-KONTROL d.o.o. LABORATORY DEPARTMENT

SMART TRUCK BED LINER - TINTABLE

By Authority Of THE UNITED STATES OF AMERICA Legally Binding Document

Mohawk for HP Indigo. Visit mohawkconnects.com for complete stocking info.

Geomembrane Test Methods

RESOLUTION MEPC.205(62) Adopted on 15 July GUIDELINES AND SPECIFICATIONS FOR ADD-ON EQUIPMENT FOR UPGRADING RESOLUTION

Wind Turbine Gear Lubricants

Finish & SuperFinish. Airless diaphragm pumps. Finish & SuperFinish. Wide range of applications Various performance classes Innovative QLS technology

NAVSEA REVIEWED ASTM F-718. Part B: B62V260 (standard hardener), B62V265 (OAP hardener)

homestead carriage house QUALITY DOOR SOLUTIONS SINCE 1947

Correcting Low Asphalt Pavement Friction. Brian L. Schleppi OH DOT Office of Technical Services

HEMPAXANE CLASSIC 55000

PDS N5.2.1 March AQUABASE Plus Engine Bay Color System PRODUCT DESCRIPTION

Manual KREBS Viscometer PCE-RVI 5

Binks Model 95SL SPRAY GUN

Transcription:

MS 134 : 2007 - Latex Emulsion for Exterior and Interior Use 1. Condition in Container MS 134 : 2007 Clause 5.2.1 MS 134 : 2007 i) Clause 5.2.4.1 ii) Clause 5.2.4.4 4. Washability MS 133 : Part F9 100 ml 1 week 5. Resistance to Accelerated Weathering (500 hours) MS 133 : Part F8 100 ml 4 weeks 6. Resistance to Fungal Growth MS 133 : Part G6 100 ml 4 weeks 7. Scrubbability (Textured Paint only) ASTM D2486 Applied on test panel 1 week 8. Non-Volatile Matter MS 133 : Part B2 100 ml 1 week 9. Consistency MS 133 : Part A9 100 ml 1 week 10. Specific Gravity MS 133 : Pt. A12 200 ml 1 week 11. Fineness of Grains MS 133 : Part C6 100 ml 1 week 12. Opacity MS 133 : Part D4 100 ml 2 weeks 13. Drying Time, Hard Dry MS 133 : Part C3 100 ml 1 week 14. Resistance to Algal Growth MS 134 : 2007 Annex A 100 ml 8 weeks

MS 125 : 1995 Gloss Enamel Paint 1. Condition in Container MS 125 : 1995 Clause 4.2.1 MS 125 : 1995 i) Clause 4.2.3.1 ii) Clause 4.2.3.4 4. Non-Volatile Matter MS 133 : Part B2 100 ml 1 week 5. Opacity MS 133 : Part D4 100 ml 2 weeks 6. Flexibility & Adhesion MS 133 : Part E1 100 ml 1 week 7. Flash Point MS 133 : Pt. A10 100 ml 1 week 8. Viscosity MS 133 : Part A6 200 ml 1 week 9. Wet Edge Time MS 133 : Pt. C1 100 ml 1 week 10. Specific Gravity MS 133 : Pt. A12 200 ml 1 week 11. Fineness of Grains MS 133 : Part C6 100 ml 1 week 12. Drying Time, Surface Dry MS 133 : Part C2 100 ml 1 week 13. Drying Time, Hard Dry MS 133 : Part C3 100 ml 1 week 14. Gloss MS 133 : Pt. D5 100 ml 1 week 15. Resistance to Accelerated Weathering (250 hours) MS 133 : Part F8 100 ml 3 weeks

MS 903 : 1984 - Latex Emulsion for Interior Use 1. Condition in Container MS 903 : 1984 Clause 4.2.1 MS 903 : 1984 i) Clause 4.2.4.1 ii) Clause 4.2.4.4 4. Washability MS 133 : Part F9 100 ml 1 week 5. Fastness to Artificial Light (168 hours) MS 133 : Part F5 100 ml 2 weeks 6. Resistance to Fungal Growth MS 133 : Part G6 100 ml 4 weeks 7. Non-Volatile Matter MS 133 : Part B2 100 ml 1 week 8. Consistency MS 133 : Part A9 100 ml 1 week 9. Specific Gravity MS 133 : Pt. A12 200 ml 1 week 10. Fineness of Grains MS 133 : Part C6 100 ml 1 week 11. Opacity MS 133 : Part D4 100 ml 2 weeks 12. Drying Time, Hard Dry MS 133 : Part C3 100 ml 1 week

MS 132 : 1993 Undercoating for Gloss Enamel Paint 1. Condition in Container MS 125 : 1995 Clause 4.2.1 MS 125 : 1995 i) Clause 4.2.3.1 ii) Clause 4.2.3.4 4. Opacity MS 133 : Part D4 100 ml 2 weeks 5. Flexibility & Adhesion MS 133 : Part E1 100 ml 1 week 6. Drying Time, Surface Dry MS 133 : Part C2 100 ml 1 week 7. Drying Time, Hard Dry MS 133 : Part C3 100 ml 1 week 8. Consistency MS 133 : Part A9 100 ml 1 week

MS 164 : 2007 Road Marking Paints 1. Condition in Container MS 164 : 2007 Clause 5.2.1 MS 164 : 2007 i) Clause 5.2.4.1 ii) Clause 5.2.4.4 4. Skinning MS 164 : 2007 Clause 4.2.1 300 ml 1 week 5. Non-Volatile Matter MS 133 : Part B2 100 ml 1 week 6. Flexibility & Adhesion MS 133 : Part E1 100 ml 1 week 7. No Pick Up Time MS 164 : 2007 Appendix A 100 ml 1 week 8. Drying Time, Hard Dry MS 133 : Part C3 100 ml 1 week 9. Resistance to Bleeding MS 164 : 2007 Appendix B 100 ml 1 week 10. Resistance to Abrasion MS 164 : 2007 Appendix C 100 ml 1 week 11. Luminance Factor MS 164 : 2007 Appendix D 100 ml 1 week 12. Resistance to Water MS 133 : Part F7 100 ml 1 week 13. Consistency MS 133 : Part A9 100 ml 1 week Continue to next page.

.continued from previous page MS 164 : 2007 Road Marking Paints 14. Specific Gravity MS 133 : Pt. A12 200 ml 1 week 15. Skid Resistance MS 164 : 2007 200 ml 1 week 16. Fineness of Grains MS 133 : Part C6 100 ml 1 week 17. Resistance to Accelerated Weathering (300 hours) MS 133 : Part F8 100 ml 4 weeks 18. Retroreflectivity Test MS 164 : 2007 100 ml 2 weeks 19. Opacity MS 133 : Part D4 100 ml 2 weeks

Restricted Copy Salinan Terhad Bil. Barangan/Produ k Spesifikasi Jenis Ujian Kaedah Ujian Kuantiti sampel yang diperlukan Tempoh ujian (hari) Penyimpanan No. Material/Product Specification Type of Tests Method of Tests Quantity sample required Test duration (days) Storage 7. Road Marking Paint MS 164 : 1991 All clauses : Fresh sample 2 cans of 1 litre with glass beads & without glass beads 390 Room temperature Fresh sample 24 1 can of 1 litre with glass beads & without glass beads

Fresh sample 390 2 cans of 1 litre 11.Luminance Factor 12.Resistance to Water 13.Consistency 14.Specific Gravity MS 164 : 1991 Appendix D MS 133 : Part F7 MS 133 : Part A9 MS 133 : Part C12 Fresh sample 1 can of 1 litre 15.Skid Resistance MS 164 : 1991 16.Fineness of Grind MS 133 : Pt. C6 Fresh sample 390 17.Accelerated Weathering (300 hours) MS 133 : Pt. F8 2 cans of 1 litre 18.Retroreflectivity Test 19.Opacity MS 164 : 1991 MS 133 : Pt. D4 20.Storage Stability MS 164 : 1991 Fresh sample 24 1 can of 1 litre