RAYMARK LABELS SCOPE. This Quality Assurance Specification establishes the quality standard for Tyco Raymark Labels
|
|
- Job Stevenson
- 6 years ago
- Views:
Transcription
1 RW 2518 Revision 1 Page 1 of 9 Date Printed 15-Apr-08 Tyco Electronics Cheney Manor, Swindon. UK RW 2518 Revision 1 RAYMARK LABELS SCOPE This Quality Assurance Specification establishes the quality standard for Tyco Raymark Labels Approved Signatories* Quality Assurance Technical Product Management Tyco UK : Gordon White John Swift Rachel Swift * This document is electronically reviewed and approved - therefore no signatures will appear.
2 RW 2518 Revision 1 Page 2 of 9 Date Printed 15-Apr REVISION HISTORY Revision Number AFC Number Date Incorporated By 1 Formerly RK 6648 Revn AFC 307 October 2004 Paul Crofts 2. REQUIREMENTS 2.1 Composition, Appearance and Colour The labels shall comprise a curable coating on a pressure sensitive backing strip carried on a release carrier. The surface of the coating shall be smooth, free from coloured impurities and shall be white. The curable coating shall have no fractured edges. 2.2 Dimensions Height and width shall be in accordance with customer orders. The thickness shall be 0.15 ± 0.04mm exclusive of the release paper. 2.3 Test Requirements The test requirements shall be as specified in Table TEST METHODS 3.1 Preparation of Test Specimens Printing Curing The labels shall be printed using recommended printers and inks. Details of approved printers and inks are available from Tyco The labels shall be cured using the recommended cure methods, details of which are available from Tyco Adhesive Substrates Where specified for the test method cured labels 25mm wide x 175mm long shall be fixed to test plates of Aluminium. The Aluminium plates shall be degreased with Iso propyl alcohol and the labels applied as detailed in FINAT test method FTM1 using a standard 2Kg FINAT roller. (Note: This roller is specified in the FINAT Pressure Sensitive Laminates Suppliers and Users Technical Manual Section 2 (June 1980.)
3 RW 2518 Revision 1 Page 3 of 9 Date Printed 15-Apr-08 TEST METHODS (Cont d) Conditioning Unless otherwise specified the labels fixed to the aluminium test plates shall be conditioned for 24 ± 2 hours at ambient temperature prior to testing to allow the pressure sensitive adhesive to develop optimum strength Number of Test Specimens Unless otherwise specified three specimens shall be used for each test. 3.2 Adherence of Cured Coating The test specimens shall be cured as specified in Clause and then allowed to cool to ambient temperature. Each label shall be folded in half and creased with the coating uppermost. The coating shall be examined for evidence of cracking. 3.3 Adhesive Peel Strength Test specimens shall be prepared as specified in Clause 3.1. In addition to aluminium, test plates of the substrate materials listed in Table 1 shall be prepared as specified in Clause The test method shall be as specified in. For tests at non-ambient conditions the test specimens shall be conditioned at the test temperature for a minimum of 20 minutes and a maximum of 60 minutes Minute Adhesion Test specimens shall be prepared as detailed in Clause 3.1 except that the conditioning period shall be 20 minutes ± 5 minutes prior to testing. 3.5 Print Legibility The test label shall be examined, using normal reading vision, and all patterns, colours and text shall remain unbroken and completely discernible. The labels shall also not show signs of any cracking, flaking, bubbling or lifting from the substrate. 3.6 Print Adherence The labels shall be tested as specified in SAE-AS paragraph
4 RW 2518 Revision 1 Page 4 of 9 Date Printed 15-Apr-08 TEST METHODS (Cont d) 3.7 Dry Abrasion Resistance Test labels shall be prepared as specified in Clauses and The test method shall be as specified in BS 4781.A7 using a Taber Abrader. The wheel shall be a type CS10 with an applied loading, and number of cycles as specified in Table Wet Abrasion Resistance The test method shall be as specified in Clause 3.7 except that the abrading wheels shall be felt type CS5. The wheels shall be totally immersed in the test fluid for 1h ± 10 minutes, removed and blotted dry with absorbent paper towelling and then allowed to dry for 1h ± 10 minutes before the test. The applied load and number of cycles shall be specified in Table Print Permanence The specimens shall be prepared as specified in Clause 3.1 excluding the conditioning period. The test method shall be as specified for resistance to solvents in MIL-STD-202F, method Light Fastness (Xenon Arc) The test specimens shall be prepared as specified in Clause 3.1 excluding the conditioning period. The test method shall be as specified in ASTM G26 Method D. Test for the time specified in Table Humidity Steady State The test specimens shall be prepared as specified in Clause 3.1 and then subjected to the time, temperature and humidity specified in Table Thermal Cycling The test specimens shall be prepared as specified in Clause 3.1 and then subjected to 10 cycles as specified in Table 1: The change over time between each temperature shall not exceed 5 minutes. Note : Samples may experience a colour shade change Thermal Ageing The test specimens shall be prepared as specified in Clause 3.1 and then subjected to the time and temperature specified in Table 1. Note : Samples may experience a colour shade change.
5 RW 2518 Revision 1 Page 5 of 9 Date Printed 15-Apr-08 TEST METHODS (Cont d) 3.14 Low Temperature Flexibility The test label with dimensions of 25mm x 38.5mm shall be applied to a 6mm diameter cable and conditioned as stated in Table 1. After conditioning the cable shall be wrapped round a preconditioned mandrel of 60mm diameter in a close helix Fungus Resistance The test specimens shall be prepared as specified in Clause 3.1. The test method shall be as specified in BS 2011 Part 2.1 J Variant Low Fire Hazard Characteristics In accordance with BR1326(A) Class 5 for use in submarine atmospheres. External Approval by UK Navy Chemical Resistance The test specimens shall be prepared as specified in Clause 3.1 and immersed for the time and temperature in one of the chemicals listed in Table 1 The specimens shall be removed from the chemical, lightly wiped and air dried for 2 hours ± 15 minutes. The test shall be repeated on the remaining specified fluids using fresh samples. Note: In the case of Skydrol the sample shall be lightly wiped not more than two times before drying. To meet the Skydrol immersion requirement the sample must be oven cured for 5 minutes at a temperature of 150 c
6 RW 2518 Revision 1 Page 6 of 9 Date Printed 15-Apr RELATED STANDARDS & issue BS 4781 MIL-STD-202F (Method 215) ASTM G26 BS 2011 Part 2.1J: BR 1326 SAE-AS FINAT Pressure Sensitive Laminates: Suppliers and Users Technical Manual: Test Method Peel Adhesion (180 C) at 300mm per minute Pressure-sensitive adhesive plastics labels for permanent use Test Methods for Electronic and Electrical Components Use: Resistance to Solvents Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials Environmental testing. Tests. Test J and guidance. Mould growth Materials Toxicity Guide (Restricted) Marking of the Electrical Insulating Materials. Subsequent amendments to, or revisions of, any of the above publications apply to this standard only when incorporated in it by updating or revision. 5. Sampling Testing frequency shall be Production Routine or Qualification. Production routine tests shall be carried out on every coated roll of sheet material and shall consist of Print Legibility and Print Permanency using only the Iso propyl alcohol/mineral spirit mixture. A batch of sheet material is defined as that quantity of material coated at any one time produced as a continuous roll. Qualification shall be carried out to the requirements of the Design Authority. 6 Preparation for Delivery 6.1 Packaging 6.2 Marking Raymark shall be supplied in vacuum sealed foil bags with desiccatant and overboxed. Each package shall be labelled showing the description, quantity, size, batch number, Use Before date and "Manufactured Date". 6.3 Shelf Life The shelf life is 18 months from the manufacturing date, when the following conditions have been met. Store unopened material below 35 C (95 F). Once opened, store material below 25 C (77 F) and below 80% RH. Reseal in original packaging and use within 6 months, but do not use after the use by date.
7 RW 2518 Revision 1 Page 7 of 9 Date Printed 15-Apr-08 TABLE 1 Test Requirements Test Test Method Test Requirements Dimensions: Thickness Clause ± 0.04 mm Adherence of Cured Coating Clause 3.2 No Cracking Adhesive Peel Strength to: Aluminium Stainless Steel Alkyd Painted Surface Polyurethane Painted Surface Acrylic Painted Surface GRP F4 ABS Phenolic PVC 20 minute Adhesion Clause 3.4 Adhesive Peel Strength (non-ambient temperature) +85 ± 2 C 7 N/25mm minimum +110 ± 2 C 3 N/25mm minimum Print Legibility Clause 3.5 Dry Abrasion Resistance (500 grms 500 cycles) Wet Abrasion Resistance (250 grms 500 cycles) 20% IPA + 80% Water ASTM No 1 Oil IRM 902 Oil Detergent - 2% Teepol with water Clause 3.7 BS 4781.A7 Clause 3.8 BS 4781.A7
8 RW 2518 Revision 1 Page 8 of 9 Date Printed 15-Apr-08 TABLE 1 Test Requirements (Cont d) Test Test Method Test Requirements Print Permanency Clause 3.9 MIL-STD-202F Method 215 Light Fastness (Xenon Arc) (Test Duration 250 hours) Clause 3.10 Humidity Steady State (168 ± 2 hrs at 40 ± 2 C, 95% RH) Clause 3.11 Thermal Cycling One cycle consists of the following: 4 h ± 15 m at -55 ± 3 C 4 h ± 15 m at 25 ± 5 C 4 h ± 15 m at 150 ± 3 C 4 h ± 15 m at 25 ± 5 C Clause 3.12 No separation of the label from the test plate Thermal Ageing (168 ± 2h at 150 ± 3 C) Clause 3.13 No separation of the label from the test plate - Print Adherence Clause 3.6 No separation of the label from the test plate Low Temperature Flexibility (4h ± 15m at -40 ± 2 C) Clause 3.14 Fungus Resistance Clause 3.15 BS 2011 Part 2.1 J No cracking of the labels shall be seen when examined under normal reading vision. The print shall remain legible. Surface creasing shall be ignored 1 maximum Low Fire Hazard Characteristics BR 1326 (A) As defined by UK Navy (restricted)
9 RW 2518 Revision 1 Page 9 of 9 Date Printed 15-Apr-08 Chemical Resistance Test (24 ± 1h immersion at 23 ± 2 C) White Spirits Iso propyl alcohol Ethylene Glycol Hydraulic Fluid to H-515 Diesel Fuel TABLE 1 Test Requirements (Cont d) Test Test Method Test Requirements Clause Print Adherence Clause 3.6 Chemical Resistance Test (24 ± 1h immersion at 50 ± 2 C) Lubricating Oil to O-149 Salt Water (3.5%) Clause N/25mm minimum - Print Adherence Clause 3.6 Chemical Resistance Test (1hour immersion at 23 ± 2 C) Skydrol 500B4 1 (Samples must be oven cured) - Print Legibility - Print Adherence Chemical Resistance Test (2h ± 15m immersion at 100 ± 2 C) Water Clause 3.17 Clause 3.5 Clause 3.6 Clause N/25mm minimum 10 N/25mm minimum - Print Adherence Clause N/25mm minimum In line with a policy of continual product development, Tyco reserves the right to make changes in construction, materials and dimensions without further notice. You are advised, therefore, to contact Tyco UK Ltd., should it be necessary to ensure that this document is the latest issue. 1 Skydrol is a trade mark of Monsanto.
TMS CABLE MARKERS CM-SCE & CM-SCE-TP. Tie on Identification Product
Page 1 of 12 October 2015 Specification RW-2513 Document Number: 108-121016 TMS CABLE MARKERS CM-SCE & CM-SCE-TP Including HL cable marker range Tie on Identification Product SCOPE This quality assurance
More informationTAIYO S-200W LP WHITE THERMAL CURE LEGEND INK
TAIYO S-200W LP WHITE THERMAL CURE LEGEND INK Screen Print Application Longer Pot Life (minimum of 14 days) Meets NASA Outgas Requirement RoHS Compliant Excellent Heat Resistance in HASL Low Odor September
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T25978-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T
More informationRPL "Raised Panel Label"
Product Data Application Method - RPL (Raised Panel) Labels are innovative labels specifically designed to replace engraved and plotted plates for the identification of electrical components, electrical
More informationTUFCOTE 3.3 PR HIGH SOLIDS FAST DRY ALKYD PRIMER (formerly DuPont 681 FD )
TUFCOTE 3.3 PR (formerly DuPont 681 FD ) Tufcote 3.3 PR is an phenolic modified medium oil, lead and chromate free, single-package, VOC conforming primer (3.3 lbs./gal.) based on DuPont alkyd technology.
More informationBRADY SAS Parc Eurocit- Bat 12 45, Ave de l Europe RONCQ Cx Tel : Fax :
Technical data for Selflaminating label B427 Order Reference: PTL-29-427 Description: TLS 2200 /TLS PC Link Labels Size - Width (mm): 12.7 Size - Height (mm): 38.1 Printable Area - Height (mm): 12.7 Printable
More informationTitle: Performance Requirements of Exterior Painted Parts
Title: Performance Requirements of Eterior Page: 1 of 10 A B C D INDEX A Inde B Scope C Object D Review E Related Documents F Standard Requirements for Production Materials G System Components and General
More informationNAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.
ASTM F-718 The Sherwin-Williams Company SeaGuard 5000 HS PRODUCT DESIGNATION Part A: N11-350 base color series Part B: N11V350 hardener MIL-PRF-23236 MIL-PRF-24647 If this product is to be applied as part
More informationReliability Test Report
Reliability Test Report Page 1 of 29 Reliability flow Chart: Page 2 of 29 Test Group 1 1.1 Dimensional Analysis: 1.1.1 Test Purpose: These measurements are to verify that the units meet the dimensional
More informationSurface Preparation and Application of Ronass Pipe Shield 1319
Surface Preparation and Application of Ronass Pipe Shield 1319 RONASS TECHNICAL SUPPORT TEAM WWW.RONASS.COM SUPPORT@RONASS.COM PROTECTIVE COATINGS MARINE COATINGS DECORATIVE COATINGS Introduction Ronass
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.08.2013 to 29.08.2018 Holder of certificate: ilf
More informationMATERIAL AND EQUIPMENT STANDARD FOR FAST DRYING SYNTHETIC PRIMER TO BE USED WITH HOT APPLIED COAL TAR OR BITUMEN (ASPHALT) ENAMEL ORIGINAL EDITION
MATERIAL AND EQUIPMENT STANDARD FOR FAST DRYING SYNTHETIC PRIMER TO BE USED WITH HOT APPLIED COAL TAR OR BITUMEN (ASPHALT) ENAMEL ORIGINAL EDITION OCT. 1996 This standard specification is reviewed and
More informationNAVSEA REVIEWED ASTM F-718. Part A: MS-200 / MS209R D. Gray / MS207R Green / MS205R Red / MS201R White / MS203R Yellow / MS218H Part B
ASTM F-718 ITW Engineered Polymers, American Safety Technologies (AST) MS-200 Acrylic Epoxy Color Topping PRODUCT DESIGNATIONS Part A: MS-200 / MS209R D. Gray / MS207R Green / MS205R Red / MS201R White
More informationTest report P E. J. Magner Dipl.-Ing. (FH) N. Machill
Kiwa Polymer Institut GmbH Quellenstraße 3 D-65439 Flörsheim-Wicker Tel. +49 (0)61 45-5 97 10 Fax +49 (0)61 45-5 97 19 www.kiwa.de Test report P 8464-2-E Testing order: Tests on the coating Wecryl 124
More informationFlight Compartment. 1. General
CIRRUS AIRPLANE MAINTENANCE MANUAL Flight Compartment CHAPTER 56-10: FLIGHT COMPARTMENT GENERAL 56-10: FLIGHT COMPARTMENT 1. General The windshield is manufactured of acrylic and is adhesive bonded to
More informationHalogen Free, Flame-retardant Polyether based TPU
STANDARD COLORS CMX Cable Markers Halogen Free, Flame-retardant Polyether based TPU TECHNICAL DATA SHEET Revision Number. 1 Last Edited 11. marts 2019 OTHER COLORS MATERIAL halogen free, flame retarded
More informationPRODUCT DATA SHEET Sikafloor -359 N
PRODUCT DATA SHEET 2-PART PUR TOUGH-ELASTIC COLOURED SEAL COAT DESCRIPTION is a two part tough-elastic, coloured, non-yellowing, polyurethane seal coat. USES may only be used by experienced professionals.
More informationRequirements for IC Engine Coolant Hoses
AUTOMOTIVE INDUSTRY STANDARD Requirements for IC Engine Coolant Hoses PRINTED BY THE AUTOMOTIVE RESEARCH ASSOCIATION OF INDIA P.B.NO.832, PUNE 411 004 ON BEHALF OF AUTOMOTIVE INDUSTRY STANDARDS COMMITTEE
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD
Translated English of Chinese Standard: GB/T25978-2010 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 43.020 T 04 GB/T 25978-2010 Road vehicles
More informationHIGH SPEED MEZZANINE PRODUCT SPECIFICATION
OARD TO OARD CONNECTOR 75005 Receptacle Assembly 75003 Plug Assembly Table of Contents 1.0 Scope 2.0 Product Description 3.0 Applicable Documents and Specifications 4.0 Ratings 5.0 Performance 5.1 Qualification
More informationStandard G50 90 degree Table with cable to upper machine crosshead and G227 upper grips. G Width 130 mm (5.1 )
G50 Peel Test Fixture 90 Degrees with optional angle adjustment laminated surface coatings films packaging and rigid backings The G50 test fixture is ideal to test inflexible adherends for which a 180
More informationB 344 PermaSleeve markers are supplied in roll form in a flattened format on a carrier designed for use with thermal transfer printers.
Technical Data Sheet BRADY B 344 FLUID RESISTANT PERMASLEEVE MARKER TDS No. B 344 Effective Date: 01/08/2014 Description: GENERAL Print Technology: Thermal Transfer Material Type: Irradiated polyolefin
More informationPRODUCT DATA SHEET SP-1386
DESCRIPTION: ADVANTAGES: SP-1386 is a hybrid two-component elastomeric polyurethane coating designed for long-term corrosion protection of steel and concrete substrates. SP-1386 is available in Spray Grade
More informationNAVSEA REVIEWED ASTM F-718. Chesterton ARC 855N, Ceramic Filled Epoxy Coating
ASTM F-718 ARC Composite Technology Chesterton ARC 855N, Ceramic Filled Epoxy Coating MIL-PRF-32171 If this product is to be applied as part of a coating system, all components of the system must be as
More informationCOMMERCIAL ITEM DESCRIPTION SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT
METRIC A-A-3164A April 18, 2007 SUPERSEDING A-A-3164 August 20, 1998 COMMERCIAL ITEM DESCRIPTION SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT 1. SCOPE. This description covers a lusterless (flat)
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S P/N 08R04-TP6-100 Application 2010 ACCORD CROSSTOUR Publications No. AII 41956 Issue Date NOV 2009 PARTS LIST Left front door visor Illustration of the Door Visors
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 18752 First edition 2006-07-15 Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification Tuyaux et flexibles
More informationPERFORMALOC 9000 Advanced Productivity Coatings from PPG
PERFORMALOC 9000 Advanced Productivity Coatings from PPG Performance Coatings that Loc Offering its users color and gloss retention that surpasses most 2-comp coatings are manufactured from proprietary,
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RMNW K HTS-1 /3 Date: 217. 4. 21 Data sheet : ANTI-SULFURATION RMNW1,16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C Relative
More informationStandard G50 90 degree Table with cable to upper machine crosshead and G227 upper grips
G50 90 Degree Peel Test Fixtures G50 test fixtures are ideal to test inflexible adherends for which a 180 peel test is not suitable because of the cracking, breaking or delamination of the adherend. The
More informationDILLARD S TEST PROTOCOL FOR DILR US LUGGAGE (V26)
Test Date: Reviewed By/Date: SUPPLEMENTAL PROTOCOLS DILLARD S TEST PROTOCOL FOR 1 The sample shall be reviewed against the requirements of California Proposition 65 to determine if additional testing or
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18869-01-00 according to DIN EN ISO/IEC 17025:2005 Holder of certificate: ilf Forschungs- und Entwicklungsgesellschaft Lacke
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Charter Coating Service (2000) Ltd. Suite
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI 49242 Kevin Wendt Phone: 517 439 1485 MECHANICAL Valid To: November 30, 2014 Certificate Number: 2745.01
More informationSilFORT* SHP401. Technical Data Sheet. SilFORT* SHP401. Description SilFORT AS4000 Hard Coat
Technical Data Sheet SilFORT* SHP401 SilFORT* SHP401 Description SilFORT AS4000 premium-performance hard coat is a clear, non-yellowing silicone coating which provides optimal protection against deterioration
More informationSEP 2016 Rev D2
Product Specification 108-2112 28 SEP 2016 Rev D2 VAL-U-LOK* Connectors 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for VAL-U-LOK* Connectors. 1.2. Qualification
More informationWXGUARD WIND SEGMENTED LIGHTNING DIVERTER STRIPS INSTALLATION GUIDE.
WXGUARD WIND SEGMENTED LIGHTNING DIVERTER STRIPS INSTALLATION GUIDE www.wxguardwind.com Shine Wire Products, Inc. 25 Print Works Drive Adams, MA 01220 1-800-543-5151 www.shinewire.com WXGuard is the new
More informationNAVSEA REVIEWED ASTM F-718. Interbond 998, Two-pack Anticorrosive High Solids Epoxy Deck Primer
ASTM F-718 International Paint LLC Interbond 998, Two-pack Anticorrosive High Solids Epoxy Deck Primer PRODUCT DESIGNATIONS Part A: KRA922/KRA924/KRA925/KRA92 Part B: KRA923 MIL-PRF-24667 If this product
More informationNAVSEA REVIEWED ASTM F-718. Dura-Plate - B62H210, B62L210, B62V210 (optically active pigment)
ASTM F-718 The Sherwin-Williams Company Dura-Plate UHS Epoxy Primer PRODUCT DESIGNATIONS Dura-Plate - B62H210, B62L210, B62V210 (optically active pigment) MIL-PRF-23236 If this product is to be applied
More informationTABLE OF CONTENTS FOREWORD... 2 INTRODUCTION SCOPE NORMATIVE REFERENCES DEFINITIONS AND ABBREVIATIONS... 3
TITLE SPECIFICATION FOR MEDIUM VOLTAGE DATE: FEBRUARY 2015 PAGE: 1 OF 25 TABLE OF CONTENTS Page FOREWORD... 2 INTRODUCTION... 3 1 SCOPE... 3 2 NORMATIVE S... 3 3 DEFINITIONS AND ABBIATIONS... 3 4 REQUIREMENTS...
More informationNAVSEA REVIEWED ASTM F-718. MS-440G LR, Low Radar Signature Epoxy Nonskid Deck Coating
ASTM F-718 ITW Engineered Polymers, American Safety Technologies MS-440G LR, Low Radar Signature Epoxy Nonskid Deck Coating PRODUCT DESIGNATIONS Part A: Dark Gray MS434R Part B: MS432H MIL-PRF-24667 If
More informationPRODUCT SPECIFICATION
of 3 C Section : For the 200222, 2002323, 2002444, 20025, 200252, 200252, 20026, 200262, 200262, 20028, 200283, 200284, 2002822, 2002824, 200283, 2002832, 2002833, 2002834 and 2002835 series parts..0 GENERAL
More information013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS
013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEYLON ELECTRICITY BOARD SRI LANKA Specification for MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEB Specification
More information020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB)
020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS Page 1.0 Scope 3 2.0 System Parameters 3 3.0 Service
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 42449 2010 CIVIC S 4- Issue Date AUG 2009 PARTS LIST Left front door visor TOOLS AND SUPPLIES REQUIRED Isopropyl alcohol Shop towel
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 44389 2011 CIVIC S 4- Issue Date AUG 2010 PARTS LIST Left front door visor TOOLS AND SUPPLIES REQUIRED Isopropyl alcohol Shop towel
More informationBostik Intucrylic Sealant INTUMESCENT ACRYLIC JOINT SEALANT
Bostik Intucrylic Sealant INTUMESCENT ACRYLIC JOINT SEALANT Date: 02 July 2014 Fact Sheet No.: TDS00644 YOUR SMART ADVANTAGES High levels of certification Will not slump in joints up to 30mm Prevents passage
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
(part of Smithers Rapra and Ltd) Packaging Technical Services Cleeve Road Leatherhead Surrey KT22 7RU Contact: Mr G Collis Tel: +44 (0)1372 802000 Fax: +44 (0)1372 802245 E-Mail: gcollis@smithers.com Website:
More informationPSI Anti-Corrosion Tape
General information Technical specifications Requirement evaluation Application instructions Certificates PSI Anti-Corrosion Tape 8 Pipeline Accessories 85 The Systems PSI anti-corrosion tapes have been
More informationSPECIFICATION. Surface Acoustic Wave Filter. SMS-51-L-SFT FX-66 DATE June 30, 2014 WISOL. Byun, Kyung-Su. User WISOL CO., LTD.
SPECIFICATION Surface Acoustic Wave Filter USER USER PART No. SEMCO PART No. DOC. No. DATE June 30, 2014 REVISION Preliminary WISOL Kim, Kyung-Sik Byun, Kyung-Su Choi. Jae hyeong ISSUED BY APPROVED BY
More information3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive
3 3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive Technical Bulletin October, 2009 Description 3M Cushion-Mount Plus Plate Mounting Tapes with Easy Mount Adhesive incorporate several
More informationPRODUCT SPECIFICATION
ML-XT COMMERCIAL VEHICLE CONNECTOR SERIES 1.0 SCOPE This Product Specification relates to the ML-XT Commercial Vehicle, (CV), Power and/or Signal wire-to-wire connector system. This system consists of
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory P/N 08P48-T3L-100 Application 2013 ACCORD 2-DOOR Publications No. AII 13018 Issue Date OCT 2012 PARTS LIST Rear bumper applique Illustration of the Rear Bumper Applique
More informationNAVSEA REVIEWED ASTM F-718. SeaVoyage Copper Free Antifoulant; N51R301 Red, N51B301 Black, N51L301 Blue
ASTM F-718 The Sherwin Williams Company SeaVoyage Copper Free Antifoulant PRODUCT DESIGNATIONS SeaVoyage Copper Free Antifoulant; N51R301 Red, N51B301 Black, N51L301 Blue MIL-PRF-24647 If this product
More informationAug07 Rev A All Paragraphs Revised
Qualification Test Report Universal MATE-N-LOK* Connector 110-213 28Aug07 Rev A All Paragraphs Revised 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on Universal MATE-N-LOK* connectors
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory SIDE UNDER S Application 2013 CIVIC 2-DOOR Publications No. AII 13069 Issue Date NOV 2012 PARTS LIST 4 Flare nuts Left spoiler 2 Washer-nuts Right spoiler 2 Screws 2
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 41770 2010 RL P/N 08R04-SJA-201 Issue Date JUNE 2009 PARTS LIST INSTALLATION NOTE: Door visor (front left) These instructions show the
More informationGeomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. BII 44686 2011 RL P/N 08R04-SJA-201 Issue Date DEC 2010 PARTS LIST INSTALLATION NOTE: Door visor (front left) These instructions show the
More informationCC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
More informationBS-40 BS-25 BS-27* BS-07* BS-10* BS-12* BS-22* BS-02* BS-15 BS-08 BS-39
COLOR OPTIONS Please Call For Availability SPECIALTY WHITE BLACK BROWN GREY CLEAR BS-02 BS-02-SD FEEL THE DIFFERENCE Of Our Soft Durometer Line *SD = Optional Soft Durometer Domestic Phone: 856-345-7650
More informationVIA Platform Environmental Qualification Testing Standards
VIA Platform Environmental Qualification Testing Standards Revision: 1 Report Dated: September 7 th 2016 Report Prepared By: Noel Joyce Reliability Lab Manager Page 1 of 16 Table of Contents 1. Purpose...
More informationJun 20,2014 Rev A
Product Specification 108-115067 Jun 20,2014 Rev A DDR4 DIMM Through-hole Memory Socket 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity
More informationDESCRIPTION AND OPERATION
FLIGHT COMPARTMENT 1. DESCRIPTION AND OPERATION The windshield is manufactured of acrylic and is adhesive bonded to the fuselage. Replacement is accomplished by removing the interior trim around the windshield,
More informationNFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents
Reference: Various TIA 13-1 (SC 13-8-21/TIA Log #1098) Tentative Interim Amendment NFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents 2013 Edition Pursuant to Section 5 of the NFPA
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 25852 PILOT Issue Date AUG 2003 PARTS LIST INSTALLATION NOTE: Door visor (Front left) These instructions show the left door visors being
More informationSMART TRUCK BED LINER - TINTABLE
SMART Truck Bed Liner (SMT93) is a durable K polyurethane coating that provides surfaces with a protective barrier. SMART Black Truck Bed Liner (SMT930) is also available. One Kit of SMART Bed Liner includes:
More informationNote to users: This electronic document is not subject to copyright. You may copy it, but you are requested not to disseminate altered copies.
Note to users: This electronic document is not subject to copyright. You may copy it, but you are requested not to disseminate altered copies. Technology Assessment Program NIJ Standard for Metallic Handcuffs
More informationProduct Technical Bulletin
Product Technical Bulletin ORAJET Series 3951 Professional Wrapping Cast Inkjet Media Description High-performance ORAJET Series 3951 Professional Wrapping Film has been specially developed for vehicle
More informationSIGMACOVER 350. PRODUCT DATA SHEET December 12, 2014 (Revision of June 1, 2014) DESCRIPTION
DESCRIPTION Two-component, high-build, polyamine-cured epoxy primer/coating PRINCIPAL CHARACTERISTICS Surface tolerant primer/coating for wide use in Marine and Protective Coatings Marine use: suitable
More informationINSTALLATION INSTRUCTIONS Accessory S P/N 08R04-SWA-100 Application 2010 CR-V Publications No. AII 42599 Issue Date AUG 2009 NOTE: Visors may not be legal in all states. Please check the laws of your state
More informationTitre / Title HIGH RELIABILITY RF COAXIAL LOADS AND ATTENUATORS GENERIC SPECIFICATION
Date: December 19 th, 16 ISSUE: 1/B PAGE: 1 / 21 Titre / Title HIGH RELIABILITY RF COAXIAL LOADS AND ATTENUATORS GENERIC SPECIFICATION Rédigé par / Written by Responsabilité / Responsibility Date Signature
More informationPOLYFUSE Resettable PTCs Surface Mount > 2920L Series
Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY
More informationPosiTest. Pull-Off Adhesion Tester. INSTRUCTION MANUAL v PosiTest AT-M (manual) PosiTest AT-A (automatic)
PosiTest Pull-Off Adhesion Tester INSTRUCTION MANUAL v. 4.0 PosiTest AT-M (manual) PosiTest AT-A (automatic) Introduction The portable, hand-operated PosiTest Pull-Off Adhesion Tester measures the force
More informationDETAIL SPECIFICATION RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES
INCH-POUND 11 August 2006 SUPERSEDING MIL-R-25988B 12 July 1983 DETAIL SPECIFICATION RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES Reactivated
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11140-4 First edition 2001-05-01 Sterilization of health care products Chemical indicators Part 4: Class 2 indicators for steam penetration test packs Stérilisation des produits
More informationJun06 Rev D
Product Specification High Speed Serial Data 2 Connector 108-1965 27Jun06 Rev D 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the Tyco Electronics High
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S P/N 08R04-SZA-100 Application 2009 PILOT Publications No. AII 39405 Issue Date MAY 2008 PARTS LIST TOOLS AND SUPPLIES REQUIRED Left front door visor Isopropyl alcohol
More informationMay2015 Rev A
Product Specification 108-60104 15May2015 Rev A ANGLED ENTRY JACK FOR CATEGORY 6 APPLICATIONS 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity
More informationCHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: HFC K HTS 0001 /3 Date: 2017. 1. 10 Specification Title: Style: CHIP FUSE; RECTANGULAR TYPE HFC32[Optional code:ag] RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained
More informationCHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: FMC K HTS 0001 /7 Date: 2017. 1. 10 Specification Title: CHIP FUSE; RECTANGULAR TYPE Style: FMC10, 16 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained in this specification
More informationNAVSEA REVIEWED ASTM F-718. Intershield 300HS, High-Solids Abrasion- Resistant Aluminum Pure Epoxy Anticorrosive
ASTM F-718 International Paint LLC Intershield 300HS, High-Solids Abrasion- Resistant Aluminum Pure Epoxy Anticorrosive PRODUCT DESIGNATIONS Part A: ENA380 Bronze or ENA381 Aluminum (Gray) Part B: ENA383
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory S P/N 08P20-STX-200A Application 2010 MDX Publications No. BII 42020 Issue Date JAN 2010 PARTS LIST Door edge film LF Door edge film RF Door edge film LR Door edge film
More informationSECTION ARCHITECTURAL WINDOW FILM. For best results, display hidden notes to specifier by clicking TOOLS / OPTIONS / VIEW / HIDDEN TEXT
SECTION 08872 ARCHITECTURAL WINDOW FILM For best results, display hidden notes to specifier by clicking TOOLS / OPTIONS / VIEW / HIDDEN TEXT PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Window Film.
More informationMEZALOK* Stacking Connector System
Product Specification 108-2411 25 FEB 16 Rev D MEZALOK* Stacking Connector System 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the MEZALOK* Stacking Connector
More informationMITRAS MATERIALS GMBH
MITRAS MATERIALS GMBH Friedrich-Ochs-Str. 2 92637 Weiden/Opf. Tel.: 0961 / 89-810 / 89-812 Fax: 0961 / 89-672 Directory of services L a b o r a t o r y MITRAS MATERIALS GMBH Edition 02/18 Rev. 08 page
More informationCHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: SBF K HTS 0001 /4 Date: 2017. 1. 10 Specification Style: CHIP FUSE; RECTANGULAR TYPE SBF32[Optional code:as] RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained in
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory BODY S Application 2015 CIVIC 4- Publications No. VERSION 1 Issue Date SEPT 2014 PARTS LIST Left front body side molding (marked FR-L) Right front body side molding
More informationNTC Thermistor for Automotive: TSM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant
More informationTUFCOTE 1.9 HG-D HIGH GLOSS WATERBORNE ACRYLIC DTM (formerly DuPont 72P )
TUFCOTE 1.9 HG-D (formerly DuPont 72P ) Tufcote 1.9 HG-D is a high gloss, single-package, VOC conforming product (1.9 lbs./gal.) based on waterborne acrylic technology. The resulting coating delivers good
More informationNAVSEA REVIEWED ASTM F-718. Part A: B62L230 OAP Blue, B62W230 White, B62RW230 Red Oxide, B62AW230 Haze Gray
ASTM F-718 The Sherwin Williams Company Fast Clad ER PRODUCT DESIGNATIONS Part A: B62L230 OAP Blue, B62W230 White, B62RW230 Red Oxide, B62AW230 Haze Gray Part B: B62V230 Clear, B62GV230 Light Green, B62AV230
More informationModification Record of Product Specification
Modification Record of Product Specification No, DSP-14 1303 Product Name SRV Connector Systems Rev. No, Note Reason Place Date Engineer R0 Initial Release DEC 2.19.14 A.M. Page 1/17 PRODUCT SPECIFICATION
More informationSection 3 - Chemical/Environmental Resistance Part 1 - XR-5 Fluid Resistance Guidelines
Section 3 - Chemical/Environmental Resistance Part 1 - XR-5 Fluid Resistance Guidelines The data below is the result of laboratory tests and is intended to serve only as a guide. No performance warranty
More informationPTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
More informationCOMMERCIAL ITEM DESCRIPTION HOSE AND HOSE ASSEMBLIES, NONMETALLIC SPRAY
[INCH-POUND] A-A-59613 August 16, 2001 SUPERSEDING ZZ-H-521F May 28, 1993 COMMERCIAL ITEM DESCRIPTION HOSE AND HOSE ASSEMBLIES, NONMETALLIC SPRAY The General Services Administration has authorized the
More informationASTM STANDARDS ON PSA TAPE
ASTM STANDARDS ON PSA TAPE Richard L Sheehan, 3M, St Paul, MN ASTM International is a not-for-profit, independent, standards writing organization. It develops and publishes voluntary consensus standards
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTONEUM NORTH AMERICA, INC Haggerty Rd. Novi, MI Jian Pan Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTONEUM NORTH AMERICA, INC. 29293 Haggerty Rd. Novi, MI 48331 Jian Pan Phone: 248 324 2264 MECHANICAL Valid To: October 31, 2017 Certificate Number: 1745.02
More informationNAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.
ASTM F-718 International Paint, LLC Interthane 990 MIL-PRF-24667 If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL. This NAVSEA-REVIEWED
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory P/N 08P48-TZ5-200 Application 2014 MDX Publications No. BII 48832 Issue Date MAY 2013 PARTS LIST Rear bumper applique Applicator INSTALLATION NOTE: Do not damage the
More informationSMART TRUCK BED LINER - BLACK
SMART Truck Bed Liner (SMT930) is a durable K polyurethane coating that provides surfaces with a protective barrier. SMART Tintable Truck Bed Liner (SMT93) is also available. One Kit of SMART Bed Liner
More information