Marking Fee for IS 636:1988 Non-percolating Flexible Delivery Hose for Fire Fighting
|
|
- Isabel Ray
- 5 years ago
- Views:
Transcription
1 Marking Fee for IS 636:1988 Non-percolating Flexible Delivery Hose for Fire Fighting Description Value Unit 100 METRE L S Marking Fee S S Marking Fee Slab 1 Rate 17.3 Slab 1 Qty All Enforcement Date Remarks Marking Fee for IS 8423:1994 Controlled Percolating Hose for Fire Fighting Description Value Unit 100 METRE L S Marking Fee S S Marking Fee Slab 1 Rate 13.9 Slab 1 Qty All Enforcement Date Remarks
2 Doc: STI-636/5, October 1989 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONTROLLED PERCOLATING HOSE FOR FIRE FIGHTING ACCORDING TO IS: 8423 : Laboratory : An inspection department shall be maintained which shall be suitably equipped and staffed, to carry out the different tests given in the specification. 1.1 All the testing apparatus shall be checked/ calibrated periodically and records of such checks/ calibrations shall be maintained. 2. Test Records- All records of tests shall be kept in suitable forms approved by the Bureau of Indian Standards (BIS) 2.1 Copies of any records or charts that may be required by BIS shall be made available at any time or request. 2.2 Quality Control It is recommended that as far as possible, statistical quality control (SQC) methods may be used for controlling the quality of the products as envisaged in this scheme [See IS:397 (Part I) 1972, IS:397 (Part 2) and IS:397 (Part 3)-1980]. 3. Standard Mark The Standard Mark as given in column (1) of the First Schedule of the licence shall be applied on each hose along with the other markings, provided always that the hoses to which this Mark is applied conforms to every requirements of the specification. 4. Markings In addition, the following information shall be marked with indelible letters of at least 2 cm in heights on each hose beginning at a point not less than 1 meter from each end. a) Types of hose, b) Size of the hose, c) Length of the hose, d) Manufacturer s name or trade mark or both; e) Identification in code/control unit number or otherwise to enable to trace back factory record and f) Month & year of manufacture. 5. Testing:- The hoses may be dusted with French chalk (see IS ) or the inside and also outside. In case of coated/covered hoses if requested by the purchaser and shall be packed and delivered in specified length indicated clean and dry condition in polyethylene bags. 6. Tests and inspection, at indicated in Table 1 and at the level at control specified therein, shall be carried out on the whole production of the factory which 10 covered by this scheme and appropriate record and charts maintained in accordance with the above.
3 6.1 If a hose falls in any one or more of the requirements mentioned at the Levels of control, it shall be considered unfit for the purpose of marking. 6.2 The hoses rejected under 5.1 may, however, be suitably reprocessed at the defects rectified except those failed in bursting test, Kink Test and Adhession Such reprocessed hoses, when tested again, shall conform to all the requirement of specification. Hoses which failed in any one of the following requirement, shall be rejected and shall not be marked with standard mark of the Bureau. i) Busting Tests, ii) Kink Tests, and, iii) Adhesion Test iv) Abrasion Test v) Heat Resistance Test, In respect of all other clause of the specification and at all stages of manufacture, the factory will maintain appropriate control and check that their product conforms to the various requirement of the specification. 7. Rejection : A separate record shall be maintained giving information relating to the rejection of hoses, which do not conform to the specification and the method of their disposal 8. Sample The licence shall supply, free of charge, the sample or samples required in accordance with the Bureau of the Indian Standards (Certification ) Regulations, 1986 from his factory or godown. Bureau shall pay for the sample taken by it from the open market. 9. Replacement : Whenever a complaint is received soon after the goods with Certification Mark have been purchased and used, and if there is adequate evidence that the goods have been misused, defective goods or their components shall be replaced or repaired, free of cost, by the licensee in case the complaint is proved to be genuine and the warranty period(where applicable) has not expired. The final authority period (where applicable) product to the Indian Standard shall be with BIS 10. Stop Marking : The marking of the product shall be stopped under intimation to BIS, if at any time, there is some difficulty in maintaining the conformity of the product to the specification, or the testing equipment goes out of order, or if directed to do so by BIS for any reason. The marking may be resumed as soon as the defects are removed or when BIS gives the permission to do so, the information regarding resumption of marking shall also be sent to BIS. 11. Production Data : The licensee shall sent to BIS as per the enclosed proforma, a statement of the quantity produced, marked and exported by him and the trade value thereof during the half year ending 30 June and 31 December. This statement is required to be forwarded to BIS on or before the 31 st day of July and January for the preceding half year.
4 Doc: STI-636/5, October 1989 TABLE 1 LEVEL OF CONTROL (Para 6 of the scheme of Testing and Inspection) Clause Test Details Test Method Level of control Remark Clause Reference Member of Sample Lot Size 5 Requirements IS One After every 500m General do- -do- -do Workmanship do- -do- After every 8000m Rot proofing do- -do- After every 500m Inner Lining do- -do- -do- 5.2 Covering of the rode forcemeat 5.2 -do- -do- All Hoses 5.3 Length 5.3 -do- One After every 500m 5.4 Mass 5.4 -do- -do- -do- 5.5 Coil diameter 5.5 -do- -do- After every 2000m 5.6 Hydrostatic Burst Pressure Test 5.7 Hydrostatic Proof Pressure Test 5.6 -do- -do- After every 8000m 5.7 -do- -do- All Hoses 5.8 Kink Test 5.8 -do- One After every 8000m 5.9 Change in Length 5.10 Change in Diameter 5.9 & do- -do- After every 2000m do- -do- -do-
5 5.11 Requirements for Rubber Lining and the outer Coating do- -do Adhesion Appendix B IS 636:1988 One After every 8000m Accelerated Ageing Test 5.12 Abrasion Resistance 5.13 Water Pick UP/Moisture Absorption do- -do- After every 15000m do- -do- After every 8000m do- -do- After every 8000m For Type B Hose only 5.14 Heat Resistance do- -do- After every 8000m 5.15 Oil Resistance Test 5.16 Ozone Resistance do- -do- After every 8000m do- -do- After every 15000m For Type B Hose only For Type B Hose only
6 Doc: STI- 8423/ 2 nd July 1994 SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CONTROLLED PERCOLATING HOSE FOR FIRE FIGHTING ACCORDING TO IS 8423 : Laboratory : An inspection department shall be maintained which shall be suitably equipped and staffed, to carry out the different tests given in the specification. 1.1 All the testing apparatus shall be checked/ calibrated periodically and records of such checks/ calibrations shall be maintained. 2. Test Records- All records of tests shall be kept in suitable forms approved by the Bureau of Indian Standards (BIS) 2.1 Copies of any records or charts that may be required by BIS shall be made available at any time or request. 2.2 Quality Control It is recommended that as far as possible, statistical quality control (SQC) methods may be used for controlling the quality of the products as envisaged in this scheme [See IS:397 (Part I) IS:397 (Part 2) and IS:397 (Part 3)-1980]. 2.3 In addition, the provision of Quality System specified in IS: Quality system-model for the Quality Assurance in final Inspection and Test may be complied with as far as possible. 3. Standard Mark The Standard Mark as given in column (1) of the First Schedule of the licence shall be applied on each hose along with the other markings, provided always that the hoses to which this Mark is applied conforms to every requirements of the specification. 4. Markings In addition, the following information shall be marked with indelible letters of at least 2 cm in heights on each hose beginning at a point not less than 1 meter from each end. a) Types of hose; b) Internal diameter of the hose; c) Manufacturer s name or trade mark or both; d) Month & year of manufacture; e) Indentification in code/control unit number or otherwise to enable to trace back factory record; f) Made in India if required. 5. The hose shall be made of a jacket of cotton or synthetic material or their combination. The jacket shall be treated internally with any suitable coating agent to ensure controlled percolation. 5.1 The jacket shall be free from visible defects, such as, dirt, knots, lumps and irregularity of twists. 5.2 If the jacket is woven from cotton yern it shall be tested prior to internal treatment for pentachlorophenyl Laurate(PCPL) according to the procedure laid down in 10 of IS 3522(Pt. 2)-1989 and shall be not less than 1.5 percent by mass. 5.3 Other rot-proofing materials when used shall be tested by pure culture, mixed culture, Aspergillusniger and soil burial methods prescribed in IS 1389 : 1994 and shall conform to the requirements stipulated against each method. 5.4 Each consignment of French chalk used for dusting before packing shall be accompanied with a test certificate indicating conformity to requirement of IS 380 : 1978, otherwise a sample shall be got tested to ensure conformity before use
7 6. Levels of Control The tests and inspections, as indicated in Table 1 attached and at the level of control specified there in, shall be carried out on the whole production of the factory which is covered by this scheme and appropriate records maintained in accordance with paragraph 2 above. All the production which conforms to the Indian Standard and covered by this licence shall be marked with the Standard mark. 6.1 Control unit Hoses of the same type and diameter produced continuously under similar condition and totalling upto 2000m in length shall constitute a control unit. 6.2 On the basis of tests and inspection results, decision shall be taken regarding conformity or otherwise with the requirement of the specification. 6.3 If a hose fails in any one or more of the requirement mentioned at the levels of control, it shall be considered as unfit for the purpose of marking and control unit to which it belongs shall be rejected. 6.4 The hoses rejected under 6.3 above may, however, be suitably reprocessed and the defects rectified. Such reprocessed hoses when tested again shall conform to all the requirement of the specification. 6.5 In respect of all other clauses of the specification, and at all stages of manufacture, the factory shall maintain appropriate controls and checks to ensure that their product conforms to the various requirements of the specification. 7. Rejection : A separate record shall be maintained giving information relating to the rejection of hoses, which do not conform to specification and method of their disposal. Such hoses shall in no case be stored together with that conforming to the specification 8. Samples : The licence shall supply, free of charge, the sample(s) required in accordance with the Bureau of Indian Standards (Certification) Regulation, from his factory or godowns. BIS shall pay the samples taken by it from the open market. 9. Replacement : Whenever a complaint is received soon after the goods with Certification Mark have been purchased and used, and if there is adequate evidence that the goods have been misused, defective goods or their components shall be replaced or repaired, free of cost, by the licensee in case the complaint is proved to be genuine and the warranty period(where applicable) has not expired. The final authority period (where applicable) product to the Indian Standard shall be with BIS 10. Stop Marking : The marking of the product shall be stopped under intimation to BIS, if at any time, there is some difficulty in maintaining the conformity of the product to the specification, or the testing equipment goes out of order, or if directed to do so by BIS for any reason. The marking may be resumed as soon as the defects are removed or when BIS gives the permission to do so, the information regarding resumption of marking shall also be sent to BIS. 11. Production Data : The licensee shall sent to BIS as per the enclosed proforma, a statement of the quantity produced, marked and exported by him and the trade value thereof during the half year ending 30 June and 31 December. This statement is required to be forwarded to BIS on or before the 31 st day of July and January for the preceding half year.
8 IS CONTROLLED PERCOLATING HOSE FOR FIRE FIGHTING Table 1 Levels of Control (Para 6 of the scheme of testing and inspection) Doc: STI- 8423/ 2 nd July 1994 TEST DETALIS LEVELS OF CONTROL Clause Requirements Test Method No. Of Samples Clause Reference Frequency Remarks 3 Construction &visible defects 3.1 IS: All Hose House not meeting the require-sents shall be rejected. 4 Internal Diameter 4.1 & do- - -do- 5 Length 5.1 -do- - -do- 7 Mass 7.1 & Table 1 -do- - -do- 6 Flexibility & Coil diameter 9 Evenness of wetting out 5.1 -do- Two Each Control Unit 9.1 -do- Two -do- 8 Percolation 8.1 & Table 2 -do- Two -do- 11 Hydrostatic bursting pressure 11. & 6.2 -do- IS 443 : 1975 One -do- 3 PCPL (where applicable) 3.1 & 10 IS 8423 : 1994 IS 3522(Pt 2) : 89 One -do- See also Cl.5.2 of the STI 12 Flammability 12.1 IS 8423 : 1994 Two -do- 10 Hydrostatic proof pressure 10.1 & 8.3 -do- IS 443 : 1975 Two -do- 13 Kink Test 13.1 IS 8423 : 1994 Two -do- 14 Change in size do- Two For every 30 hoses or 1000 metre of hoses 16 Packing do- All hoses Visual 7 Mass 7.1 & Table 1 IS 8423 : 1994 Two Each Control Unit
2.0 TEST RECORDS - All records of inspection and tests shall be kept in suitable forms approved by the Bureau of Indian Standard (BIS).
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PROTECTIVE HELMETS FOR MOTOR CYCLE RIDERS ACCORDING TO IS 4151:1993 1.0 LABORATORY A laboratory shall be maintained which shall be suitably equipped
More information1.1 All testing apparatus shall be periodically checked and calibrated and records of such checks/calibration shall be maintained.
SCHEME OF TESTING AND INSPECITON FOR CERTIFICATION OF ELECTRICAL ACCESSORIES CIRCUIT BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS PART1 CIRCUIT BREAKERS FOR ac OPERATION
More information2. 0 Test Records - All records of analysis and tests shall be kept in suitable forms approved by the Bureau of Indian Standards.
SCHEME OF TESTING AND INSPECTION FOR CERIFICATION OF LABORATORY GLASSWARE GRADUATED MEASURING CYLINDERS ACCORDING TO IS 878:2008/ISO 4788:2005 (Second Revision) DOC: STI/878/2 1.0 Laboratory - A laboratory
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF COPPER ALLOY GATE, GLOBE AND CHECK VALVES FOR WATER WORKS PURPOSES ACCORDING TO IS 778:1984
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF ACCORDING TO DOC:STI/778/4 1 LABORATORY - A laboratory shall be maintained which shall be suitably equipped and staffed, where different tests given
More information4. MARKING: Each cistern shall be provided with a label containing the following information or the information paper strip pasted to it.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF PLASTIC FLUSHING CISTERNS FOR WATER CLOSETS AND URINALS (SECOND REVISION) ACCORDING TO IS: 7231-1994 1. LABORATORY: A testing laboratory shall be maintained
More information7 The revised IS 8034:2002 and revised STI be implemented w.e.f. 1 Feb 2005.
BUREAU OF INDIAN STANDARDS (CENTRAL MARKS DEPARTMENT-III) Our Ref: CMD-III/16:8034 25 Oct 2004 Subject: Implementation of revised IS 8034:2002 Submersible Pump Sets and revised STI (Doc:STI/8034/5 ) IS
More information2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES PNEUMATIC TYRES FOR PASSENGER CAR VECHICLES DIAGONAL AND RADIAL PLY ACCORDING TO IS 15633:2005 1. LABORATORY A laboratory shall
More information2. TEST RECORDS: All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.
SCHEME FOR TESTING AND INSPECTION FOR CERTIFICATION OF DOMESTIC GAS STOVE FOR USE WITH LIQUIFIED PETROLEUM GASES ACCORDING TO IS 4246:2002 (FIFTH REVISION) 1. LABORATORY: A laboratory shall be maintained
More information2. TEST RECORDS - All records of tests, inspection and calibration shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF AUTOMOTIVE VEHICLES PNEUMATIC TYRES FOR PASSENGER CAR VECHICLES DIAGONAL AND RADIAL PLY ACCORDING TO IS 15633:2005 1. LABORATORY A laboratory shall
More informationक न द र य म ह व भ ग भ स द भ- स ए ड -III/16: IS न म बभ ग षय म ह- आई एस : 2003 क परभप लन ललए एस ट आई Doc: STI/12406/3, October 2017
क न द र य म ह व भ ग - III भ स द भ- स ए ड -III/16: IS 12406 07 न म बभ 2017 ग षय म ह- आई एस 12406 : 2003 क परभप लन ललए एस ट आई Doc: STI/12406/3, October 2017 इस उपर क त व षय क स दर भ ह सक षम प र ध क र न
More informationक न द र य म ह व भ ग भ स द भ- स ए ड -III/16: IS न म बभ ग षय म ह- आई एस : 1998 क परभप लन ललए एस ट आई Doc: STI/14587/3, October 2017
क न द र य म ह व भ ग - III भ स द भ- स ए ड -III/16: IS 14587 07 न म बभ 2017 ग षय म ह- आई एस 14587 : 1998 क परभप लन ललए एस ट आई Doc: STI/14587/3, October 2017 इस उपर क त व षय क स दर भ ह सक षम प र ध क र न
More informationDOC: STI/10322(Part 5/Sec 3)/2, September 2016
क न द र य म ह व भ ग 3 भ स द भ- क न द र य म ह व भ ग -3/16: आई एस IS 10322 5(Part /sec3) 04 अक त बभ 2016 ग षय म ह- आईएस IS 10322 5 (Part /sec3): 2012 क पवनभ क ष त एसट आई (एसट आई/10322 Part 5/Sec (3)/2, ससत
More informationCENTRAL MARKS DEPARTMENT II (Legal) Our Ref: CMD-II(L)/16:
CENTRAL MARKS DEPARTMENT II (Legal) Our Ref: CMD-II(L)/16:15633 11 06 2015 Subject:Finalization and Implementation of revised STI DOC:STI/15633/4 March 2015 for Automotive vehicles - Pneumatic tyres for
More informationCENTRAL MARKS DEPARTMENT II (Legal) Our Ref: CMD-II(L)/16:
CENTRAL MARKS DEPARTMENT II (Legal) Our Ref: CMD-II(L)/16: 8737 31 03 2015 Subject: Revision of existing STI DOC:STI/8737/5 July 1999 for Valve fittings for use with LPG Cylinder of more than 5 litre water
More informationCOMMERCIAL ITEM DESCRIPTION HOSE ASSEMBLY, NONMETALLIC, FIRE FIGHTING, WITH COUPLINGS
[INCH-POUND] A-A-59226 May 18, 1998 SUPERSEDING ZZ-H-451G January 13, 1984 COMMERCIAL ITEM DESCRIPTION HOSE ASSEMBLY, NONMETALLIC, FIRE FIGHTING, WITH COUPLINGS The General Services Administration has
More informationCopy to : Head (ITSD)- With a request to host this circular on BIS Intranet and website. : Head (VZBO) : Head (MED)
CENTRAL MARKS DEPARTMENT-II (Legal) Our Ref: CMD-II(L)/6:899 Subject: Implementation of IS 899:0 Liquefied Petroleum Gas (LPG) Containers for Automotive use - Specification (First Revision) The revision
More informationSPECIFICATION FOR REWIRABLE FUSES (KITKAT FUSES) 100A & 200A SPECIFICATION NO.: DIST/ A- KIT /
SPECIFICATION FOR REWIRABLE FUSES (KITKAT FUSES) 100A & 200A SPECIFICATION NO.: DIST/ A- KIT / 2005-06 SR.NO ITEM PAGE 1. SCOPE 2 2. WEATHER CONDITIONS 2 3. RATED VOLTAGE & FREQUENCY 2 4. GENERAL REQUIREMENT
More informationBUREAU OF INDIAN STANDARDS (Western Region Office, Mumbai) DRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS. Our Ref: DDGW Sectt(PCO/RD) 23 Jan 2014
BUREAU OF INDIAN STANDARDS (Western Region Office, Mumbai) DRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS Our Ref: DDGW Sectt(PCO/RD) 23 Jan 2014 Sub: Preparation & review of draft manuals for product
More informationPRODUCT MANUAL FOR DISINFECTANT FLUID, PHENOLIC TYPE According to IS 1061: 2017
PM/IS 1061/1/August 2018 PRODUCT MANUAL FOR DISINFECTANT FLUID, PHENOLIC TYPE According to IS 1061: 2017 This Product Manual shall be used as reference material by all Regional/Branch Offices & licensees
More informationIC Chapter 4. Private Assembly of Vehicles; Engine Identification Numbers
IC 9-17-4 Chapter 4. Private Assembly of Vehicles; Engine Identification Numbers IC 9-17-4-0.3 "Assembled vehicle" Sec. 0.3. As used in this chapter, "assembled vehicle" means: (1) a vehicle, excluding
More informationBUREAU OF INDIAN STANDARDS DRAFT FOR COMMENTS ONLY. (Not to be reproduced without the permission of BIS or used as an AMENDMENT)
Doc: ET 25(6345) BUREAU OF INDIAN STANDARDS DRAFT FOR COMMENTS ONLY (Not to be reproduced without the permission of BIS or used as an AMENDMENT) DRAFT AMENDMENT NO. 3 TO IS 14665 (Part 2 / Sec 1) : 2000
More information532: 2006 Bicycle tube valves and valve tubing Specification (third revision) 2414: 2005 Cycle and rickshaw pneumatic tyres (fourth revision)
For BIS use only Draft Indian Standard CYCLE RUBBER TUBES (MOULDED/JOINTED) SPECIFICATION (fourth revision of IS 2415) Not to be reproduced without the permission Last date for receipt of comments is of
More informationSFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 *
SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 * PRODUCT: Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
More informationTECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE
TECHNICAL SPECIFICATION FOR SHACKLE HARDWARE FITTINGS SUITABLE FOR TENSION STRING TO BE USED FOR 11KV LINE The hardware fittings suitable for tension string to be used for 11KV consisting of following
More informationCITY OF UNION CITY. County of Hudson State of New Jersey CORPORATION APPLICATION FOR LICENSE FOR BUSINESS OR OCCUPATION TOWING
CITY OF UNION CITY County of Hudson State of New Jersey CORPORATION APPLICATION FOR LICENSE FOR BUSINESS OR OCCUPATION TOWING To the Honorable Board of Commissioners of the City of Union City: Pursuant
More informationTHE ENVIRONMENT PROTECTION ACT Regulations made by the Minister under section 96 of the Environment Protection Act 2002
Government Notice No. 208 of 2006 THE ENVIRONMENT PROTECTION ACT 2002 Regulations made by the Minister under section 96 of the Environment Protection Act 2002 1. These regulations may be cited as the Environment
More informationSFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 *
SFI SPECIFICATION 35.2 EFFECTIVE: DECEMBER 29, 2014 * PRODUCT: Heavy Duty Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards
More informationSFI SPECIFICATION 27.1 EFFECTIVE: OCTOBER 11, 2006 *
SFI SPECIFICATION 27.1 EFFECTIVE: OCTOBER 11, 2006 * PRODUCT: Window Nets 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating and
More informationComhairle Chontae Chill Mhantain Wicklow County Council Fire Service.
Comhairle Chontae Chill Mhantain Wicklow County Council Fire Service. APPLICATION FOR LICENCE TO STORE PETROLEUM NOTICE TO THE LOCAL AUTHORITY: OFFICE USE ONLY Name of Authority: Wicklow County Council,
More informationDANGEROUS GOODS PANEL (DGP) MEETING OF THE WORKING GROUP OF THE WHOLE
International Civil Aviation Organization DGP-WG/12-WP/40 11/9/12 WORKING PAPER DANGEROUS GOODS PANEL (DGP) MEETING OF THE WORKING GROUP OF THE WHOLE Montréal, 15 to 19 October 2012 Agenda Item 2: Development
More informationFORBIDDEN on the TNT Air Network
Lithium Metal Batteries Lithium Ion Batteries Air Transport of Section II Lithium Batteries Overview of Air Transport of Section II Lithium Batteries Packed UN number / Packing Instruction Battery capacity
More informationGREATER VANCOUVER SEWERAGE AND DRAINAGE DISTRICT BYLAW NO. 307, A Bylaw to License Commercial Waste Haulers
GREATER VANCOUVER SEWERAGE AND DRAINAGE DISTRICT BYLAW NO. 307, 2017 A Bylaw to License Commercial Waste Haulers WHEREAS: A. Pursuant to the Greater Vancouver Sewerage and Drainage District Act (the Act
More informationTITLE 165. CORPORATION COMMISSION CHAPTER 16. ANTIFREEZE EFFECTIVE SEPTEMBER 11, 2017
TITLE 165. CORPORATION COMMISSION CHAPTER 16. ANTIFREEZE EFFECTIVE SEPTEMBER 11, 2017 Last Amended The Oklahoma Register Volume 34, Number 24 September 1, 2017 publication Pages 787-2226 PLEASE NOTE: This
More information/ I S S : / S T S I
Agenda Electrical Transformers (Quality Control) Order Obtaining BIS Licence Requirements of Guidelines / IS 1180-1: 1: 2014 / STI Concerns in Getting BIS Licence Experience with BEE Regulations Recommendations
More informationHYDRAULICALLY REGULATED DOOR CLOSER
DRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS Our Ref.CRO 22 / MDD-1 13 Dec 2013 Please find enclosed the following draft certification manual : HYDRAULICALLY REGULATED DOOR CLOSER Kindly examine the
More informationE/ECE/324/Rev.2/Add.108/Rev.1/Amend.3 E/ECE/TRANS/505/Rev.2/Add.108/Rev.1/Amend.3
16 January 2019 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
More informationDraft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
More informationReference: C.N TREATIES-2 (Depositary Notification) DRAFT RULE NO. 1
(XI.B.31) Reference: C.N.532.2001.TREATIES-2 (Depositary Notification) AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS FOR PERIODICAL TECHNICAL INSPECTIONS OF WHEELED VEHICLES AND THE RECIPROCAL
More informationDANGEROUS GOODS PANEL (DGP) MEETING OF THE WORKING GROUP OF THE WHOLE
International Civil Aviation Organization DGP-WG/13-WP/6 4/3/13 WORKING PAPER DANGEROUS GOODS PANEL (DGP) MEETING OF THE WORKING GROUP OF THE WHOLE Montréal, 15 to 19 April 2013 Agenda Item 5: Review of
More informationSSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL. Estimation and Costing & Utilization of Electrical Energy
1 SSC-JE STAFF SELECTION COMMISSION ELECTRICAL ENGINEERING STUDY MATERIAL Estimation and Costing & Utilization of Electrical Energy Estimation and Costing & Utilization of electrical Energy Estimation
More information(i) in paragraph 9, for sub-paragraph (i) the following shall be substituted, namely:-
Revision 3 Date: 28/01/2016 Amendment to Schedule 6 for Induction Motor In the said schedule, (i) in paragraph 9, for sub-paragraph (i) the following shall be substituted, namely:- Effective from 1 st
More informationDecree of the Ministry of Transport and Communications
579/2000 Decree of the Ministry of Transport and Communications on transportable pressure equipment and tanks discharged or filled by pressure and used for the transport of dangerous goods Adopted in Helsinki,
More informationAGREEMENT. done at Vienna on 13 November Addendum 1: Rule No. 1. Revision 1
6 March 2007 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM CONDITIONS FOR PERIODICAL TECHNICAL INSPECTIONS OF WHEELED VEHICLES AND THE RECIPROCAL RECOGNITION OF SUCH INSPECTIONS done at Vienna on 13 November
More informationE/ECE/324/Rev.1/Add.38/Rev.2 E/ECE/TRANS/505/Rev.1/Add.38/Rev.2
E/ECE/324/Rev.1/Add.38/Rev.2 24 January 2018 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be
More informationPROSECUTING GUIDELINES FOR VEHICLE MASS MEASURING
Page 3 of 13 3 PROSECUTING GUIDELINES FOR VEHICLE MASS MEASURING 1. INTRODUCTION ION: 1.1 The provisions in this document are guidelines only and noncompliance does not exclude prosecution. The decision
More informationDoc:TED 11(794)W 1 September 2012 Draft Standard Automotive Vehicles - Windscreen Wiping System for 3 Wheeler Vehicles - Specification
For Comments only Doc:TED 11(794)W 1 September 2012 Draft Standard Automotive Vehicles - Windscreen Wiping System for 3 Wheeler Vehicles - Specification Not to be reproduced without permission Last date
More informationThis Part applies to the emissions of visible pollutants from compression ignition engined (diesel) vehicles, effective from 1st April 1991.
CHAPTER 1 : OVERALL REQUIREMENTS 1 Scope : This Part applies to the emissions of visible pollutants from compression ignition engined (diesel) vehicles, effective from 1st April 1991. 2 Definitions : 2.1
More informationCOMMERCIAL ITEM DESCRIPTION HOSE ASSEMBLY, NONMETALLIC, FIRE FIGHTING, WITH COUPLINGS
INCH-POUND --59226 1 December 2006 SUPERSEDING --59226 18 May 1998 COMMERCIL ITEM DESCRIPTION HOSE SSEMLY, NONMETLLIC, FIRE FIGHTING, WITH COUPLINGS The General Service dministration has authorized the
More informationE/ECE/324/Add.3/Rev.3 E/ECE/TRANS/505/Add.3/Rev.3
19 August 2013 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for
More informationWORKING PAPER. International TWENTY-F Edition. (Presented SUMMARY. paragraph (DGP/24-WP/3)). to amend shown in. Appendix B. 1.1 biennium.
International Civil Aviation Organization DGP/24-WP/65 20/8/13 WORKING PAPER DANGEROUS GOODS PANEL (DGP) SUMMARY TWENTY-F FOURTH MEETING Montréal, 28 October to 8 November 2013 Agenda Item 2: Development
More informationDoc:TED 11(794)W Dec Draft Standard Automotive Vehicles - Windscreen Wiping System for 3 Wheeler Vehicles - Specification
For Comments only Doc:TED 11(794)W Dec 2010 Draft Standard Automotive Vehicles - Windscreen Wiping System for 3 Wheeler Vehicles - Specification Not to be reproduced without permission Last date for receipt
More informationPART X SUB PART (B): DETAILS OF STANDARDS OF VISIBLE AND GASEOUS POLLUTANTS FROM DIESEL ENGINES FOR CONSTRUCTION EQUIPMENT VEHICLES
PART X SUB PART (B): DETAILS OF STANDARDS OF VISIBLE AND GASEOUS POLLUTANTS FROM DIESEL ENGINES FOR CONSTRUCTION EQUIPMENT VEHICLES Scope This part applies to the emission of visible pollutants and gaseous
More informationBatteries shipped by Road
Batteries shipped by Road Lithium Batteries Extract from the Road Code ADG 7.5 See next page for special provisions and packing instructions (Note: LP = Large Packages over 400 Kg. These Packing Instructions
More informationEXPLOSIVES (GENERAL PROVISIONS) (JERSEY) ORDER 1972
EXPLOSIVES (GENERAL PROVISIONS) (JERSEY) ORDER 1972 Revised Edition Showing the law as at 1 January 2006 This is a revised edition of the law Explosives (General Provisions) (Jersey) Order 1972 Arrangement
More informationE/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1
30 August 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions for
More informationOfficial Journal of the European Communities
1.11.2000 EN Official Journal of the European Communities L 279/33 DIRECTIVE 2000/55/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 September 2000 on energy efficiency requirements for ballasts
More information1 [94. NOISE LIMIT FOR GENERATOR SETS RUN WITH DIESEL
[94. NOISE LIMIT FOR GENERATOR SETS RUN WITH DIESEL. Noise limit for diesel generator sets (upto 000 KVA) manufactured on or after the [ st January, 005]. The maximum permissible sound pressure level for
More informationRESOLUTION MEPC.205(62) Adopted on 15 July GUIDELINES AND SPECIFICATIONS FOR ADD-ON EQUIPMENT FOR UPGRADING RESOLUTION
MEPC.60(33)-COMPLIANT OIL FILTERING EQUIPMENT MEPC.60(33)-COMPLIANT OIL FILTERING EQUIPMENT MEPC 62/24/Add.1 Annex 24, page 1 ANNEX 24 RESOLUTION MEPC.205(62) 2011 GUIDELINES AND SPECIFICATIONS FOR ADD-ON
More informationE/ECE/324/Rev.2/Add.104/Rev.2 E/ECE/TRANS/505/Rev.2/Add.104/Rev.2
28 September 2011 Agreement Concerning the adoption of uniform technical prescriptions for wheeled vehicles, equipment and parts which can be fitted and/or be used on wheeled vehicles and the conditions
More informationCertification Scheme
Certification Scheme Barbecues burning solid fuels in accordance with DIN EN 1860-1 (Edition: August 2015) DIN CERTCO Alboinstrasse 56 12103 Berlin Tel.: +49 30 7562-1131 Fax: +49 30 7562-1141 E-mail:
More informationComparison of Indian Electricity Rules, 1956 Vs CEA (Measures relating to Safety and Electric Supply) Regulations, 2010
1 of 5. Comparison of Indian Electricity Rules, 1956 Vs CEA (Measures relating to Safety and Electric Supply) Regulations, 2010 2 Definitions 2 Not seen the definition for Inspector. But with, - Qualifications,
More information(Liability of producers and importer for spent batteries and accumulators etc.)
Law amending the Law on Environmental Protection and repealing the Law on reimbursement in connection with the collection of hermetically-sealed nickel-cadmium accumulators (closed nickelcadmium batteries)
More informationDraft Indian Standard Specification for Rubber Gaskets (First Revision of IS : 1984) ICS , ,
For BIS Use Only Draft Indian Standard Specification for Rubber Gaskets (First Revision of IS 11149 : 1984) ICS 23.040.80, 83.060, 83.140.50 Not to be reproduced without the permission of Last date for
More informationCh. 167 PORTABLE WARNING DEVICES CHAPTER 167. PORTABLE EMERGENCY WARNING DEVICES
Ch. 167 PORTABLE WARNING DEVICES 67 167.1 CHAPTER 167. PORTABLE EMERGENCY WARNING DEVICES Sec. 167.1. Authority. 167.2. Scope and application. 167.3. Types of warning devices. 167.4. Vehicles equipped
More informationTECHNICAL COMMITTEE FOR STANDARDS AND PROCEDURES FOR TRAFFIC CONTROL AND TRAFFIC CONTROL EQUIPMENT (TCSP)
TECHNICAL COMMITTEE FOR STANDARDS AND PROCEDURES FOR TRAFFIC CONTROL AND TRAFFIC CONTROL EQUIPMENT (TCSP) Prosecuting Guidelines for Speed Measuring Equipment (SME) and Traffic Light Violation Monitoring
More informationEvery manufacturer of an agricultural tractor shall meet the following requirements for the tractor model before granting the type approval.
PART X SUB PART (A) : DETAILS OF STANDARDS OF VISIBLE AND GASEOUS POLLUTANTS FROM DIESEL ENGINED AGRICULTURAL TRACTORS AND CONSTRUCTION EQUIPMENT VEHICLES 1. Scope This part applies to the emission of
More informationENGINEERS RESPONSIBILITY-WINDERS
ENGINEERS RESPONSIBILITY-WINDERS INTRODUCTION Basics of regulations The Mine Health and Safety Act 1996 Responsibilities are laid down for: Employers Employees Manufactures Employers can appoint managers
More informationE/ECE/324/Rev.1/Add.57/Rev.3 E/ECE/TRANS/505/Rev.1/Add.57/Rev.3
30 November 2017 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
More informationOfficial Journal of the European Union. (Non-legislative acts) REGULATIONS
10.1.2019 L 8 I/1 II (Non-legislative acts) REGULATIONS REGULATION (EU) 2019/26 OF THE EUROPEAN PARLIAMT AND OF THE COUNCIL of 8 January 2019 complementing Union type-approval legislation with regard to
More informationPrinciple Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act ZEK
-GB-2017-01: Defining the requirements for a GS mark approval Principle Decision by the Central Experience Exchange Circle of the Notified Bodies and the GS Bodies according to the Product Safety Act about
More informationBALLAST WATER RECORD BOOK
BALLAST WATER RECORD BOOK Name of ship: Distinctive no. or letters: M/V SAMPLE ABC1234 IMO Number: 1234567 Gross Tonnage: 10,000 Period: From to Page 1 of 9 The Ballast Water Record Book has been prepared
More informationSFI SPECIFICATION 15.2 EFFECTIVE: MAY 1, 2008 *
SFI SPECIFICATION 15.2 EFFECTIVE: MAY 1, 2008 * PRODUCT: Drag Race Front Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
More informationDraft Indian Standard FUSIBLE PLUG FOR DISSOLVED ACETYLENE GAS CYLINDER SPECIFICATION (first revision of IS 13497) (ICS )
DRAFT STANDARD IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE Ref: MED 16 :3/T- 14 Date: 06-01-2015 Gas Cylinders, Sectional Committee, MED 16 TO: a) The interested members of Mechanical Engineering Division
More informationEvidence of performance Reduction of impact sound pressure level by floor coverings
Evidence of performance Reduction of impact sound pressure level by floor coverings Test report No. 14-003029-PR01 (PB X3.1-F03-04-en-01) Client Product Getzner Werkstoffe GmbH Herrenau 5 6706 Bürs Austria
More informationReg Consolidated to Supplement 2 (Revision 3 Amendment 2)Replacement Brake Linings
[PREAMBLE] E/ECE/324/Rev.1/Add.89/Rev.3/Amend 2-E/ECE/TRANS/505/Rev.1/Add.89/Rev.3/Amend 2 3 February 2015 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT
More informationCOMMISSION REGULATION (EU) / of XXX
EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION REGULATION (EU) / of XXX implementing Regulation (EU) No 595/2009 of the European Parliament and of the Council as regards the determination
More informationELECTROTECHNICAL Letter of Authority (LOA) ADMINISTRATION PROCEDURE
ELECTROTECHNICAL Letter of Authority (LOA) ADMINISTRATION PROCEDURE LETTER OF AUTHORITY (LOA) PROCESS 1. Background: Government Notice R 89 dated 6 February 2009 published in Government Gazette 31844 introduced
More informationECOMP.3.A EUROPEAN UNION. Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 ENT 229 MI 914 ENV 837 AGRI 596 PREP-BXT 58 CODEC 2164
EUROPEAN UNION THE EUROPEAN PARLIAMT THE COUNCIL Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 T 229 MI 914 V 837 AGRI 596 PREP-BXT 58 CODEC 2164 LEGISLATIVE ACTS AND OTHER INSTRUMTS
More information1.Applicability: This specification is applicable to the following product: Coin type manganese lithium battery
1.Applicability: This specification is applicable to the following product: Coin type manganese lithium battery 2.Battery type and ratings: 2.1. Battery type: CR2335 2.2. Nominal voltage: V 2.3. Nominal
More informationTANZANIA STANDARD MEDC 9 (3861) P 2
TANZANIA STANDARD MEDC 9 (3861) 2 DRAFT TANZANIA STANDARD MEDC 9 (3861) 2 MOTORCYCLE AND SCOOTER TYRES - SECIFICATION TANZANIA BUREAU OF STANDARDS 1 0. Foreword The motorcycle and scooter tyres are currently
More informationCODE OF BALTIMORE COUNTY REGULATIONS TITLE 02. DEPARTMENT OF PERMITS, APPROVALS AND INSPECTIONS SUBTITLE 02. PERMITS AND LICENSES
CODE OF BALTIMORE COUNTY REGULATIONS TITLE 02. DEPARTMENT OF PERMITS, APPROVALS AND INSPECTIONS.01 Scope. SUBTITLE 02. PERMITS AND LICENSES CHAPTER 03. TRESPASS TOWING Authority: 21-16-123, Baltimore County
More information020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB)
020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS Page 1.0 Scope 3 2.0 System Parameters 3 3.0 Service
More informationApproval mark PL HCR 1a A
Vehicle Technology Division THE NETHERLANDS (N E D E R L A N D) Concerning (1) - approval granted - approval extended - approval refused - approval withdrawn - production definitely discontinued COMMUNICATION
More information013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS
013 : 2009 CEB SPECIFICATION MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEYLON ELECTRICITY BOARD SRI LANKA Specification for MOULDED CASE CIRCUIT BREAKERS FOR OVERHEAD NETWOKS CEB Specification
More informationLithium cells and batteries. (Instructor s Note: Post HM215N)
173.185 Lithium cells and batteries. (Instructor s Note: Post HM215N) As used in this section, lithium cell(s) or battery(ies) includes both lithium metal and lithium ion chemistries. Equipment means the
More informatione-cfr data is current as of January 5, 2017
ELECTRONIC CODE OF FEDERAL REGULATIONS e-cfr data is current as of January 5, 2017 Title 49 Subtitle B Chapter I Subchapter C Part 173 Subpart E 173.185 Title 49: Transportation PART 173 SHIPPERS GENERAL
More informationspecifying the applications each has before the AER and the AER licences and approvals such licensee or approval holder holds.
DECLARATION NAMING ALEXANDER JUSTIN VON GRAMATZKI, FORMERLY KNOWN AS ALEXANDER JUSTIN HANNE, PURSUANT TO SECTION 106(1) OF THE OIL AND GAS CONSERVATION ACT For the reasons set out in the accompanying letter,
More informationTOWN OF CANMORE. BYLAW Consolidated PROVINCE OF ALBERTA
TOWN OF CANMORE BYLAW 13-2010 Consolidated 2015-11-06 PROVINCE OF ALBERTA BEING A BYLAW OF THE TOWN OF CANMORE IN THE PROVINCE OF ALBERTA, TO PROVIDE FOR THE LICENSING, REGULATING AND CONTROLLING OF TAXIS
More informationU.S. Census Bureau News Joint Release U.S. Department of Housing and Urban Development
Raemeka Mayo or Stephen Cooper Economic Indicators Division (301) 763-5160 FOR IMMEDIATE RELEASE TUESDAY, MAY 17, 2016 AT 8:30 A.M. EDT NEW RESIDENTIAL CONSTRUCTION IN APRIL 2016 The U.S. Census Bureau
More informationThis standard covers the requirements of lighting chains. This standard covers only the safety requirements.
FOREWORD (Formal clause will be added later) This standard covers the requirements of lighting chains. This standard covers only the safety requirements. This standard (Part 5/Section 7) is one among the
More informationBLUE ULTRA Pipe & Tubing contains no regrind resin in its manufacture
BLUE ULTRA is extruded using current state of the art 100% pure PE4710 virgin resin with decades of successful history - no extra wall thickness is required to retain its extreme level of UV protection
More informationPRODUCT SAFETY DATA SHEET
Issued date : June 2, 2011 PRODUCT SAFETY DATA SHEET 1. Product and Company Identification Name of Product Model name Lithium-Ion battery (or, Lithium-Ion secondary battery) EN-EL20N VFB11201 (NCA-2P201AW)
More informationInformal Document N 20 (30th GRSP, 3-6 December 2001, agenda item 1.4) Insert in the "CONTENTS" the headlines of new annexes 10 & 11 to read:
30 November 2001 Informal Document N 20 (30th GRSP, 3-6 December 2001, agenda item 1.4) Draft Amendments To Regulation No. 17: (Strength of Seats) page ii Insert in the "CONTENTS" the headlines of new
More informationMATERIAL SAFETY DATA SHEET Page 1 of 5 MSDS#: BA
MATERIAL SAFETY DATA SHEET Page 1 of 5 SECTION 1 IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product Name: Product Code: Company Name: Address: Use of the Product: Lithium Ion
More informationWELLINGTON, NEW ZEALAND. PURSUANT to section 152 of the Land Transport Act Land Transport Rule: Vehicle Standards Compliance 2002
WELLINGTON, NEW ZEALAND PURSUANT to section 152 of the Land Transport Act 1998 I, Mark Gosche, Minister of Transport, HEREBY make the following ordinary Rule: Land Transport Rule: Vehicle Standards Compliance
More informationAUTOMOTIVE VEHICLES AIR BRAKE SYSTEMS PERFORMANCE REQUIREMENTS FOR DRAIN VALVES
For BIS use only Draft Indian Standard AUTOMOTIVE VEHICLES AIR BRAKE SYSTEMS PERFORMANCE REQUIREMENTS FOR DRAIN VALVES Not to be reproduced or used as a Standard without permission from BIS Foreword (Formal
More informationBYD B-Box Limited Warranty Letter
BYD B-Box Limited Warranty Letter Applicable Country: Australia Effective date: 01 st, Jul., 2017 BYD B-Box System Applicable product types: B-Box H 6.4 / B-Box H 7.7 / B-Box H 9.0 / B-Box H 10.2 / B-Box
More informationE/ECE/324/Rev.1/Add.91/Rev.1/Amend.2 E/ECE/TRANS/505/Rev.1/Add.91/Rev.1/Amend.2
7 December 2017 Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and
More informationUNITED STATES COAST GUARD OCEAN ENGINEERING DIVISION WASHINGTON, D.C. JANUARY 2011 SPECIFICATION FOR THE MANUFACTURE
UNITED STATES COAST GUARD OCEAN ENGINEERING DIVISION WASHINGTON, D.C. JANUARY 2011 SPECIFICATION FOR THE MANUFACTURE OF OPEN LINK, WELDED STEEL CHAIN AND BRIDLES SPECIFICATION NO. 377 REVISION L 1. SCOPE
More information4 64c hit. Wm % 41/7/4$1 The undersigned has the honour to r epor t. Mr. Mr. Approved and ordered this 18th day of August, A.D
1917. Approved and ordered this 18th day of August, A.D. 19 58. At the Executive Council Chamber, Victoria, enatu-governor. PRESENT: t i The Honourable W. Bennett Mr. Chant Mr. Peterson Mr. Westwood Mr.
More information